Search USGS⌕ Search

SEARCH · Search USGS

Results for “Engineering Analysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources
USGS1994

Statistical Techniques for Assessing water‐quality effects of BMPs

Little has been published on the effectiveness of various management practices in small rural lakes and streams at the watershed scale. In this study, statistical techniques were used to test for changes in water‐quality data from watersheds where best management practices (BMPs) were implemented. Reductions in data variability due to climate and seasonality were accomplished through the use of regression methods. This study discusses the merits of using storm‐mass‐transport data as a means of improving the ability to detect BMP effects on stream‐water quality. Statistical techniques were applied to suspended‐sediment records from three rural watersheds in Illinois for the period 1981–84. None of the techniques identified changes in suspended sediment, primarily because of the small degree of BMP implementation and because of potential errors introduced through the estimation of storm‐mass transport. A Monte Carlo sensitivity analysis was used to determine the level of discrete change that could be detected for each watershed. In all cases, the use of regressions improved the ability to detect trends. Read More: http://ascelibrary.org/doi/abs/10.1061/(ASCE)0733-9437(1994)120:2(334)

Journal of Irrigation and Drainage Engineering↗
USGS1990

Water movement through an experimental soil liner

A field-scale soil liner was constructed to test whether compacted soil barriers in cover and liner systems could be built to meet the U.S. EPA saturated hydraulic conductivity requirement (⩽ 1 × 10 −7 cm s −1 ). The 8 × 15 × 0.9 m liner was constructed in 15 cm compacted lifts using a 20,037 kg pad-foot compactor and standard engineering practices. Water infiltration into the liner has been monitored for one year. Monitoring will continue until water break through at the base of the liner occurs. Estimated saturated hydraulic conductivities were 2.5 × 10 −9 , 4.0 × 10 −8 , and 5.0 × 10 −8 cm s −1 based on measurements of water infiltration into the liner by large- and small-ring infiltrometers and a water balance analysis, respectively. Also investigated in this research was the variability of the liner's hydraulic properties and estimates of the transit times for water and tracers. Small variances exhibited by small-ring flux data suggested that the liner was homogeneous with respect to infiltration fluxes. The predictions of water and tracer breakthrough at the base of the liner ranged from 2.4–12.6 y, depending on the method of calculation and assumptions made. The liner appeared to be saturated to a depth between 18 and 33 cm at the end of the first year of monitoring. Transit time calculations cannot be verified yet, since breakthrough has not occurred. The work conducted so far indicates that compacted soil barriers can be constructed to meet the saturated hydraulic conductivity requirement established by the U.S. EPA.

Waste Management and Research↗
USGS2019

Phenology patterns indicate recovery trajectories of ponderosa pine forests after high-severity fires

Post-fire recovery trajectories in ponderosa pine (Pinus ponderosa Laws.) forests of the US Southwest are increasingly shifting away from pre-burn vegetation communities. This study investigated whether phenological metrics derived from a multi-decade remotely sensed imagery time-series could differentiate among grass, evergreen shrub, deciduous, or conifer-dominated replacement pathways. We focused on 10 fires that burned ponderosa pine forests in Arizona and New Mexico, USA before the year 2000. A total of 29 sites with discernable post-fire recovery signals were selected within high-severity burn areas. At each site, we used Google Earth Engine to derive time-series of normalized difference vegetation index (NDVI) signals from Landsat Thematic Mapper, Enhanced Thematic Mapper+, and Operational Line Imager data from 1984 to 2017. We aggregated values to 8- and 16-day intervals, fit Savitzy-Golay filters to each sequence, and extracted annual phenology metrics of amplitude, base value, peak value, and timing of peak value in the Timesat analysis package. Results show that relative to post-fire conditions, pre-burn ponderosa pine forests exhibit significantly lower mean NDVI amplitude (0.14 vs. 0.21), higher mean base NDVI (0.47 vs. 0.22), higher mean peak NDVI (0.60 vs. 0.43), and later mean peak NDVI (day of year 277 vs. 237). Vegetation succession exhibits distinct phenometric characteristics as early as year five (amplitude) and as late as year 20 (timing of peak NDVI). This study confirms the feasibility of leveraging phenology metrics derived from long-term imagery time series to identify and monitor ecological outcomes. This information may be of benefit to land resource managers who seek indicators of future landscape composition to inform management strategies.

Arizona, New Mexico↗
USGS2012

Comparison of soil thickness in a zero-order basin in the Oregon Coast Range using a soil probe and electrical resistivity tomography

Accurate estimation of the soil thickness distribution in steepland drainage basins is essential for understanding ecosystem and subsurface response to infiltration. One important aspect of this characterization is assessing the heavy and antecedent rainfall conditions that lead to shallow landsliding. In this paper, we investigate the direct current (DC) resistivity method as a tool for quickly estimating soil thickness over a steep (33–40°) zero-order basin in the Oregon Coast Range, a landslide prone region. Point measurements throughout the basin showed bedrock depths between 0.55 and 3.2 m. Resistivity of soil and bedrock samples collected from the site was measured for degrees of saturation between 40 and 92%. Resistivity of the soil was typically higher than that of the bedrock for degrees of saturation lower than 70%. Results from the laboratory measurements and point-depth measurements were used in a numerical model to evaluate the resistivity contrast at the soil-bedrock interface. A decreasing-with-depth resistivity contrast was apparent at the interface in the modeling results. At the field site, three transects were surveyed where coincident ground truth measurements of bedrock depth were available, to test the accuracy of the method. The same decreasing-with-depth resistivity trend that was apparent in the model was also present in the survey data. The resistivity contour of between 1,000 and 2,000 Ωm that marked the top of the contrast was our interpreted bedrock depth in the survey data. Kriged depth-to-bedrock maps were created from both the field-measured ground truth obtained with a soil probe and interpreted depths from the resistivity tomography, and these were compared for accuracy graphically. Depths were interpolated as far as 16.5 m laterally from the resistivity survey lines with root mean squared error (RMSE) = 27 cm between the measured and interpreted depth at those locations. Using several transects and analysis of the subsurface material properties, the direct current (DC) resistivity method is shown to be able to delineate bedrock depth trends within the drainage basin.

Oregon↗
USGS2018

Improved ASCE/SEI 7-10 ground-motion scaling procedure for nonlinear analysis of buildings

An improved ASCE/SEI 7–10 ground-motion scaling procedure for three-dimensional (3D) response history analysis (RHA) of buildings is presented. In this procedure, different scale factors for two horizontal components of the ground motion are used, and their spectral shapes are considered in ground-motion selection stage. The accuracy of the improved procedure is evaluated by utilizing 3D models of nine asymmetric-plan buildings. It is demonstrated that the improved procedure provides on average 15% conservative estimates of engineering demand parameters while the original version underestimates them on average 29%. Thus, the improved ground-motion selection and scaling procedure is found to be appropriate for nonlinear RHAs of multi-story plan-asymmetric buildings.

Journal of Earthquake Engineering↗
USGS2020

Do empirical observations support commonly-held climate change range shift hypotheses? A systematic review protocol

Background Among the most widely anticipated climate-related impacts to biodiversity are geographic range shifts, whereby species shift their spatial distribution in response to changing climate conditions. In particular, a series of commonly articulated hypotheses have emerged: species are expected to shift their distributions to higher latitudes, greater elevations, and deeper depths in response to climate change, reflecting an underlying hypothesis that species will move to cooler locations to track spatial changes in the temperature of their current range. Yet, many species are not demonstrating range shifts consistent with these hypotheses. Resolving this discrepancy and providing effective explanations for the observed variability in species’ range shifts is urgently needed to help support a range of natural resource management decisions. Here, we propose a protocol to review the body of evidence for commonly-held climate change range shift hypotheses at the species level focusing on observed latitudinal, longitudinal, elevational, and depth shifts in response to temperature and precipitation changes. We aim to answer the question: what is the impact of anthropogenic climate change (specifically changes in temperature and precipitation) on species ranges? Methods In this review protocol, we propose to conduct a systematic search of literature from internet databases and search engines in English. Articles will be screened in a two-stage process (title/abstract and full text) to evaluate whether they meet a list of eligibility criteria (e.g., presents species-level data, compares >1 time period). Initial data coding and extraction will be completed by four reviewers and checked by a secondary reviewer from among our co-authors. We will perform a formal meta-analysis to document estimated effect size using the subset of available range-shift data expressed in distance per time (e.g., km/decade). We will also use multinomial logistic regression models to assess the probability that species are shifting in a direction that supports our hypotheses (i.e. towards higher latitudes, greater elevations, and deeper depths). We will account for study methodology as a potential source of variation.

Environmental Evidence↗
USGS2026

Comparing DESIS hyperspectral and Landsat 10 simulated superspectral data for crop type classification in California's Central Valley

To advance crop type mapping in support of global food and water security, this study compared three spectral configurations: (A) the full 60-band DLR Earth Sensing Imaging Spectrometer (DESIS) hyperspectral narrowband (HNB) dataset, (B) a 14-band subset of DESIS-derived HNBs aligned with the planned Landsat 10 (formerly Landsat Next) spectral configuration (400–1000 nm), and (C) DESIS-based simulations of Landsat 10 superspectral broadbands. The analysis was conducted in California’s Central Valley, hereafter referred to as “the Central Valley”, during the peak growing month of August. DESIS imagery from August 2021, 2022, and 2023 was used sequentially for model development, testing, and independent validation. Over these three years, DESIS provided extensive hyperspectral coverage of much of the 4 million hectares in the Central Valley’s. Analyses were performed on Google Earth Engine using two pixel-based supervised classifiers, Random Forest (RF) and Support Vector Machine (SVM), to differentiate three major crop classes: row crops, grapes and tree crops, and winter wheat/fallow/other. The highest overall accuracy (86%) was achieved using SVM in combination with either the full DESIS hyperspectral dataset or the 14 DESIS narrowbands corresponding to Landsat 10. This finding aligns with earlier studies showing a small number of strategically positioned narrowbands can be optimal for crop type classification. Use of the narrowband datasets resulted in substantially higher accuracy (overall accuracy of 86%) compared to the simulated Landsat 10 broadbands (overall accuracy of 75%), supporting previous studies highlighting the utility of narrowbands. Despite the high accuracy using August imagery, the study indicates more granular crop type classification will require multi-temporal observations spanning the full phenological cycle (June–October), especially for a large number of crop classes. Acquiring task-based hyperspectral imagery over such large areas throughout the growing season remains operationally challenging. In contrast, Landsat 10 superspectral imagery could provide routine coverage across seasons and years that is practical and scalable for future large area crop type mapping and agricultural monitoring.

California↗
USGS2020

Probabilistic seismic hazard analysis at regional and national scale: State of the art and future challenges

Seismic hazard modelling is a multi-disciplinary science that aims to forecast earthquake occurrence and its resultant ground shaking. Such models consist of a probabilistic framework that quantifies uncertainty across a complex system; typically, this includes at least two model components developed from Earth science: seismic-source and ground-motion models. Although there is no scientific prescription for the forecast length, the most common probabilistic seismic hazard analyses consider forecasting windows of 30 to 50 years, which are typically an engineering demand for building code purposes. These types of analyses are the topic of this review paper. Although the core methods and assumptions of seismic hazard modelling have largely remained unchanged for more than 50 years, we review the most recent initiatives which face the difficult task of meeting both the increasingly sophisticated demands of society and keeping pace with advances in scientific understanding. A need for more accurate and spatially precise hazard forecasting must be balanced with increased quantification of uncertainty and new challenges such as moving from time-independent hazard to forecasts that are time-dependent and specific to the time-period of interest. Meeting these challenges requires the development of science-driven models which integrate all information available, the adoption of proper mathematical frameworks to quantify the different types of uncertainties in the hazard model, and the development of a proper testing phase of the model to quantify its consistency and skill. We review the state-of-the-art of the national seismic hazard modeling, and how the most innovative approaches try to address future challenges.

Reviews of Geophysics↗
USGS1980

Water resources data for Connecticut, water year 1979

Water resources data for the 1979 water year for Connecticut consist of records of stage, discharge, and water quality of streams; contents and water quality of lakes and reservoirs; and water levels and water quality of ground-water wells. This report contains records of water discharge at 56' gaging stations; stage only at 1 gaging station; tidal volume at 1 gaging station; stage only records at 2 tidal-gaging stations; contents at 36 lakes and reservoirs; water quality at 50 gaging stations, 5 lakes and reservoirs, 2 harbors; 34 wells, and 1 spring; and water levels at 66 observation wells. Also included are data for 41 creststage partial-record stations. Locations of these sites are shown on figures 2, 3, and 4. Additional water data were collected at various sites, not involved in the systematic data-collection program, and are published as miscellaneous measurements and analysis. A few pertinent stations (not included above) in bordering States are also enclosed in this report. These data represent that part of the National Water Data System operated by the U.S. Geological Survey and cooperating State and Federal agencies in Connecticut.

Connecticut↗
USGS1988

An integrated approach for automated cover-type mapping of large inaccessible areas in Alaska

The lack of any detailed cover type maps in the state necessitated that a rapid and accurate approach to be employed to develop maps for 329 million acres of Alaska within a seven-year period. This goal has been addressed by using an integrated approach to computer-aided analysis which combines efficient use of field data with the only consistent statewide spatial data sets available: Landsat multispectral scanner data, digital elevation data derived from 1:250 000-scale maps, and 1:60 000-scale color-infrared aerial photographs.

Alaska↗
USGS2019

Pressure core analysis of geomechanical and fluid flow properties of seals associated with gas hydrate-bearing reservoirs in the Krishna-Godavari Basin, offshore India

Physical properties of the sediment directly overlying a gas hydrate reservoir provide important controls on the effectiveness of depressurizing that reservoir to extract methane from gas hydrate as an energy resource. The permeability of overlying sediment determines if a gas hydrate reservoir’s upper contact will provide an effective seal that enables efficient reservoir depressurization. Compressibility, stiffness and strength indicate how overlying sediment will deform as the in situ stress changes during production, providing engineering data for well designs. Assessing these properties requires minimally-disturbed sediment. India’s National Gas Hydrates Program Expedition 2 (NGHP-02) provided an opportunity to study these seal sediment properties, reducing disturbance from gas exsolution and bubble growth by collecting a pressure core from the seal sediment just above the primary gas hydrate reservoir at Site NGHP-02-08 in Area C of the Krishna-Godavari Basin. The effective stress chamber (ESC) and the direct shear chamber (DSC) devices in the suite of Pressure Core Characterization Tools (PCCTs) were used to measure permeability, compressibility, stiffness and shear strength at the in situ vertical stress. Geotechnical properties of the predominantly fine-grained seal layer at in situ vertical stress are in typical clay sediment ranges, with low measured permeability (0.02 mD), high compressibility (Cc = 0.26 – 0.33) and low shear strength (404 kPa). Though pressure and temperature were maintained throughout the collection and measurement process to stabilize gas hydrate, the lack of effective stress in the pressure core storage chamber and the chamber pressurization with methane-free water caused core expansion and gas hydrate in a thin coarser-grained layer to dissolve. The PCCTs can reapply in situ stress with incremental loading steps during a consolidation test to account for sediment compaction. Gas hydrate dissolution can be limited by storing cores just above freezing temperatures, and by using solid spacers to reduce the storage chamber’s free volume.

Marine and Petroleum Geology↗
USGS2003

Using multiple logistic regression and GIS technology to predict landslide hazard in northeast Kansas, USA

Landslides in the hilly terrain along the Kansas and Missouri rivers in northeastern Kansas have caused millions of dollars in property damage during the last decade. To address this problem, a statistical method called multiple logistic regression has been used to create a landslide-hazard map for Atchison, Kansas, and surrounding areas. Data included digitized geology, slopes, and landslides, manipulated using ArcView GIS. Logistic regression relates predictor variables to the occurrence or nonoccurrence of landslides within geographic cells and uses the relationship to produce a map showing the probability of future landslides, given local slopes and geologic units. Results indicated that slope is the most important variable for estimating landslide hazard in the study area. Geologic units consisting mostly of shale, siltstone, and sandstone were most susceptible to landslides. Soil type and aspect ratio were considered but excluded from the final analysis because these variables did not significantly add to the predictive power of the logistic regression. Soil types were highly correlated with the geologic units, and no significant relationships existed between landslides and slope aspect. ?? 2003 Elsevier Science B.V. All rights reserved.

Engineering Geology↗
USGS2020

Effectiveness of submerged vanes for stabilizing streamside bluffs

The effectiveness of submerged vanes for stabilizing streamside bluffs varied over a 10-year monitoring period in a tributary to Lake Superior, United States. Submerged vanes are a river training device used to divert river flows away from eroding banks along meander bends and ultimately hold constant or reverse the direction of lateral migration. At the study site, the relatively steep slope, large substrate size, and flashy flow regime pushed the upper end of the design limitations of submerged vanes. Changes in channel location and morphology due to the vanes were monitored using repeat channel cross-section surveys along a 110-m reach. The vanes experienced 15 floods over the monitoring period. The two most damaging floods happened in the summer and fall of 2005 with annual exceedance probabilities of 7% and 6% respectively. A new data analysis method for rivers, using centroids of cross sections, was useful to track channel migration rapidly and objectively and, along with calculations of changes in bankfull channel size, provide metrics to describe channel change.

Journal of Hydraulic Engineering↗
USGS2007

Optical data processing and projected applications of the ERTS-1 imagery covering the 1973 Mississippi River Valley floods

Flooding along the Mississippi River and some of its tributaries was detected by the multispectral scanner (MSS) on the Earth Resources Technology Satellite (ERTS-1) on at least three orbits during the spring of 1973. The ERTS data provided the first opportunity for mapping the regional extent of flooding at the time of the imagery. Special optical data processing techniques were used to produce a variety of multispectral color composites enhancing flood-plain details. One of these, a 2-color composite of near infrared bands 6 and 7, was enlarged and registered to 1:250,000-scale topographic maps and used as the basis for preparation of flood image maps. Two specially filtered 3-color composites of MSS bands 5, 6, and 7 and 4, 5, and 7 were prepared to aid in the interpretation of the data. The extent of the flooding was vividly depicted on a single image by 2-color temporal composites produced on the additive-color viewer using band 7 flood data superimposed on pre-flood band 7 images. On May 24, when the floodwaters at St. Louis receded to bankfull stage, imagery was again obtained by ERTS. Analysis of temporal data composites of the pre-flood and post-flood band 7 images indicate that changes in surface reflectance characteristics caused by the flooding can be delineated, thus making it possible to map the overall area flooded without the necessity of a real-time system to track and image the peak flood waves. Regional planning and disaster relief agencies such as the Corps of Engineers, Office of Emergency Preparedness, Soil Conservation Service, interstate river basin commissions and state agencies, as well as private lending and insurance institutions, have indicated strong potential applications for ERTS image-maps of flood-prone areas.

Mississippi River↗
USGS2014

The shallow stratigraphy and sand resources offshore from Cat Island, Mississippi

In collaboration with the U.S. Army Corps of Engineers, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center collected over 487 line kilometers (> 300 miles) of high-resolution geophysical data around Cat Island, Mississippi, to improve understanding of the island's geologic evolution and identify potential sand resources for coastal restoration. In addition, 40 vibracores were collected on and around the island, generating more than 350 samples for grain-size analysis. The results indicate that the geologic evolution of Cat Island has been influenced by deltaic, lagoonal/estuarine, tidal, and oceanographic processes, resulting in a stratigraphic record that is quite complex. The region north of the island is dominated by lagoonal/estuarine deposition, whereas the region south of the island is dominated by deltaic and tidal deposition. In general, the veneer of modern sediment surrounding the island is composed of newly deposited sediment and highly reworked relict sediments. The region east of the island shows the interplay of antecedent barrier-island change with delta development despite a significant ravinement of sediments. The data show from little to no modern sediment east of the island, exposing relict sediments at the seafloor. Finally, the data reveal four subaqueous sand units around the island. Two of the units are northwest of the modern island and one is southwest. Given the dominant, westward, longshore transport along the Mississippi and Alabama barrier islands, the geographic location of these three units suggests that they do not contribute to the modern sediment budget of Cat Island. The last unit is directly east of the island and represents the antecedent island platform that has supplied sand over geologic time for creation of the spits that form the eastern shoreline. Because of its location east of the island, the antecedent island unit may still supply sediment to the island today.

Mississippi↗
USGS1991

Comparison of three different methods to merge multiresolution and multispectral data: Landsat TM and SPOT panchromatic

The merging of multisensor image data is becoming a widely used procedure because of the complementary nature of various data sets. Ideally, the method used to merge data sets with high-spatial and high-spectral resolution should not distort the spectral characteristics of the high-spectral resolution data. This paper compares the results of three different methods used to merge the information contents of the Landsat Thematic Mapper (TM) and Satellite Pour l'Observation de la Terre (SPOT) panchromatic data. The comparison is based on spectral characteristics and is made using statistical, visual, and graphical analyses of the results. The three methods used to merge the information contents of the Landsat TM and SPOT panchromatic data were the Hue-Intensity-Saturation (HIS), Principal Component Analysis (PCA), and High-Pass Filter (HPF) procedures. The HIS method distorted the spectral characteristics of the data the most. The HPF method distorted the spectral characteristics the least; the distortions were minimal and difficult to detect. -Authors

Photogrammetric Engineering and Remote Sensing↗
USGS2014

Coastal bathymetry and backscatter data collected in 2012 from the Chandeleur Islands, Louisiana

As part of the Barrier Island Evolution Research Project, scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center conducted nearshore geophysical surveys off the northern Chandeleur Islands, Louisiana, in July and August of 2012. The objective of the study is to better understand barrier island geomorphic evolution, particularly storm-related depositional and erosional processes that shape the islands over annual to interannual timescales (1-5 years). Collecting geophysical data will allow us to identify relationships between the geologic history of the island and its present day morphology and sediment distribution. This mapping effort was the second in a series of three planned surveys in this area. High resolution geophysical data collected in each of 3 consecutive years along this rapidly changing barrier island system will provide a unique time-series dataset that will significantly further the analyses and geomorphological interpretations of this and other coastal systems, improving our understanding of coastal response and evolution over short time scales (1-5 years). This Data Series report includes the geophysical data that were collected during two cruises ( USGS Field Activity Numbers 12BIM03 and 12BIM04 ) aboard the RV Survey Cat and the RV Twin Vee along the northern portion of the Chandeleur Islands, Breton National Wildlife Refuge, Louisiana. Data were acquired with the following equipment: a Systems Engineering and Assessment, Ltd., SWATHplus interferometric sonar (468 kilohertz (kHz)), an EdgeTech 424 (4-24 kHz) chirp sub-bottom profiling system, and a Knudsen 320BP (210 kHz) echosounder. This report serves as an archive of processed interferometric swath and single-beam bathymetry data. Geographic information system data products include an interpolated digital elevation model, an acoustic backscatter mosaic, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata. NOTE: These data are scientific in nature and are not to be used for navigation.

Louisiana↗
USGS2007

ADCP measurements of gravity currents in the Chicago River, Illinois

A unique set of observations of stratified flow phenomena in the Chicago River was made using an upward-looking acoustic Doppler current profiler (ADCP) during the period November 20, 2003 to February 1, 2004. Water density differences between the Chicago River and its North Branch (NB) seem to be responsible for the development of gravity currents. With the objective of characterizing the occurrence, frequency, and evolution of such currents, the ADCP was configured to continuously collect high-resolution water velocity and echo intensity profiles in the Chicago River at Columbus Drive. During the observation period, 28 gravity current events were identified, lasting a total of 77% of the time. Sixteen of these events were generated by underflows from the NB and 12 of these events were generated by overflows from the NB. On average, the duration of the underflow and overflow events was 52.3 and 42.1 h, respectively. A detailed analysis of one underflow event, which started on January 7, 2004, and lasted about 65h, was performed. This is the first time that ADCP technology has been used to continuously monitor gravity currents in a river. ?? 2007 ASCE.

Journal of Hydraulic Engineering↗