Search USGS⌕ Search

SEARCH · Search USGS

Results for “Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources
USGS2004

SutraGUI, a graphical-user interface for SUTRA, a model for ground-water flow with solute or energy transport

This report describes SutraGUI, a flexible graphical user-interface (GUI) that supports two-dimensional (2D) and three-dimensional (3D) simulation with the U.S. Geological Survey (USGS) SUTRA ground-water-flow and transport model (Voss and Provost, 2002). SutraGUI allows the user to create SUTRA ground-water models graphically. SutraGUI provides all of the graphical functionality required for setting up and running SUTRA simulations that range from basic to sophisticated, but it is also possible for advanced users to apply programmable features within Argus ONE to meet the unique demands of particular ground-water modeling projects. SutraGUI is a public-domain computer program designed to run with the proprietary Argus ONE? package, which provides 2D Geographic Information System (GIS) and meshing support. For 3D simulation, GIS and meshing support is provided by programming contained within SutraGUI. When preparing a 3D SUTRA model, the model and all of its features are viewed within Argus 1 in 2D projection. For 2D models, SutraGUI is only slightly changed in functionality from the previous 2D-only version (Voss and others, 1997) and it provides visualization of simulation results. In 3D, only model preparation is supported by SutraGUI, and 3D simulation results may be viewed in SutraPlot (Souza, 1999) or Model Viewer (Hsieh and Winston, 2002). A comprehensive online Help system is included in SutraGUI. For 3D SUTRA models, the 3D model domain is conceptualized as bounded on the top and bottom by 2D surfaces. The 3D domain may also contain internal surfaces extending across the model that divide the domain into tabular units, which can represent hydrogeologic strata or other features intended by the user. These surfaces can be non-planar and non-horizontal. The 3D mesh is defined by one or more 2D meshes at different elevations that coincide with these surfaces. If the nodes in the 3D mesh are vertically aligned, only a single 2D mesh is needed. For nonaligned meshes, two or more 2D meshes of similar connectivity are used. Between each set of 2D meshes (and model surfaces), the vertical space in the 3D mesh is evenly divided into a user-specified number of layers of finite elements. Boundary conditions may be specified for 3D models in SutraGUI using a variety of geometric shapes that may be located freely within the 3D model domain. These shapes include points, lines, sheets, and solids. These are represented by 2D contours (within the vertically-projected Argus ONE view) with user-defined elevations. In addition, boundary conditions may be specified for 3D models as points, lines, and areas that are located exactly within the surfaces that define the model top and the bottoms of the tabular units. Aquifer properties may be specified separately for each tabular unit. If the aquifer properties vary vertically within a unit, SutraGUI provides the Sutra_Z function that can be used to specify such variation.

Open-File Report↗
USGS2009

Aeromagnetic and Aeroradiometric Data for the Conterminous United States and Alaska from the National Uranium Resource Evaluation (NURE) Program of the U.S. Department of Energy

The National Uranium Resource Evaluation (NURE) program was initiated in 1973 with a primary goal of identifying uranium resources in the United States. The airborne program's main purpose was to collect radiometric data of the conterminous United States and Alaska. Magnetic data were also collected. After the program ended, most of the data were given to the U.S. Geological Survey (USGS). All areas were flown at about 400 feet above ground, the optimum height for collecting radiometric data, and the line spacing varied from 3 to 6 mile intervals. A few selected quadrangles or parts of quadrangles were flown at 1- or 2-mile line spacing. About forty smaller areas were targeted and flown at 0.25-mile to 1 mile line spacing.

Open-File Report↗
USGS2019

Contaminant baselines and sediment provenance along the Puget Sound Energy Transport Corridor, 2015

The transport of coal and oil can result in contaminated soil, water, and organisms from unintended releases. Trains carrying coal and crude oil regularly pass through Puget Sound, Washington, and an increase in the number of coal and oil trains is expected in the future. This study characterized levels of potentially toxic contaminants in sediment in September 2015: arsenic, metals, and polycyclic aromatic hydrocarbons (PAHs) at four sites with fine-grained sediment (Chuckanut Bay, Padilla Bay, Snohomish River Delta, Nisqually River Delta) adjacent to the Burlington Northern Santa Fe (BNSF) rail line in the Puget Sound region. Arsenic (As) and metals levels were compared to those measured at a fifth site, urban Saltwater State Park, which was expected to show contaminants associated with urbanization but not rail transport of coal and oil because it is not adjacent to the BNSF rail line. Knowledge about current properties of soil and sediment is essential for quantifying impacts of spills and other releases, and for setting remediation or restoration targets. For the sampling effort and timing of this study, all five sites had fine sediment contents of cadmium (Cd), mercury (Hg), lead (Pb), and zinc (Zn) below minimal effects levels. Pb and Zn appeared to be urban sourced. Median As, chromium (Cr), copper (Cu), and nickel (Ni) levels were in the range where adverse biological effects would possibly occur; however, Cr and Ni were geologically sourced and unlikely to be bioavailable to organisms. As, Cu, and antimony (Sb) levels were highly correlated, an association that is characteristic of legacy smelting operations; however, total sediment contents of these three elements, along with Hg and As/Sb ratios, were near natural levels and could indicate river-borne inputs. Median total PAH concentrations were highest at Snohomish River Delta, but were below minimal effects levels at all sites. Diagnostic PAH ratios were indicative of PAHs sourced from petroleum combustion and coal/biomass burning, rather than from spilled petroleum or coal. Rare earth element patterns were distinct among watersheds with Cascade volcanoes, granitic rocks, or non-volcanic sediments, making them promising sediment provenance indicators. Knowledge about sediment sources and contaminant distributions could provide unique insights about sediment-bound contaminant sourcing, delivery, and dispersal in nearshore regions.

Washington↗
USGS2019

Seismic hazard assessment at the Fallon, Nevada, Frontier Observatory for Research in Geothermal Energy site

Enhanced geothermal systems (EGS) technology aims to engineer a productive geothermal reservoir in regions of hot, but low permeability, rocks. In any EGS operation, the rock mass requires stimulation by high pressure injection of fluids, which has the potential to induce seismicity. To address the seismic hazard specifically, a probabilistic seismic hazard assessment (PSHA) is often required and is generally part of an induced seismicity mitigation plan (ISMP). A specific PSHA for the proposed Fallon, Nev., FORGE site is outlined below that relies solely on hypothetical stimulation scenarios and analog sites to assess the hazard of induced seismicity in the absence of local microseismicity. Partially due to the lack of existing seismicity at the site and partially to arrive at conservative estimates of the hazard, the PSHA is calculated for a range of b-values. Results indicate that the conservative estimates of seismic hazard at locations having significant, sensitive infrastructure near the proposed site are very low.

Nevada↗