SEARCH · Search USGS

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

USGS2006

Petrology and chemistry of Permian coals from the Paraná Basin: 1. Santa Terezinha, Leão-Butiá and Candiota Coalfields, Rio Grande do Sul, Brazil

The current paper presents results on petrological and geochemical coal seam characterization in Permian coal-bearing strata from the Paraná Basin, southern Brazil. Sequence stratigraphic analysis shows that peat accumulation in Permian time was closely linked to transgressive/regressive cycles, with peat accumulation occurring in a predominantly back barrier/lagoonal setting. Coal petrographic analysis indicates subbituminous coals at Candiota and Leão-Butiá and high volatile bituminous coals at Santa Terezinha, where locally the coal seams are thermally altered by volcanic intrusions. Petrographic composition is highly variable, with seams at Candiota and Santa Terezinha frequently enriched in inertinite. Chemical analyses indicate that all coals are mineral matter-rich (mean 49.09 wt.%), with SiO 2 and Al 2 O 3 dominating as determined by ICP-AES. Quartz is also the predominant mineral detected by X-ray diffraction, where it is associated with feldspar, kaolinite and hematite and iron-rich carbonates. The results from Scanning Electron Microscopy are broadly consistent with the bulk chemical and mineralogical analysis. Quartz and clays are common in all samples analyzed. Other minerals observed were, amongst others, carbonates (calcite, siderite, ankerite), pyrite, monazite, kaolinite, barite, sphalerite, rutile and quartz of volcanic origin. The distribution of trace elements is well within the range typical for coal basins of other areas despite the fact that the Paraná Basin coals are very high in ash yields. The average concentrations for elements of environmental concern (As, B, Be, Cd, Co, Cr, Cu, Hg, Li, Mn, Mo, Ni, Pb, Sb, Se, Tl, U, V, Zn) are similar to or less than the mean values for U.S. coal. However, considered on an equal energy basis, Paraná Basin coals will produce in combustion 5 to 10 times the amount of most elements compared to an equal weight US coal. Concentrations of major and trace elements, such as Fe, B and S, appear to be controlled by depositional setting, with increasing values in coal seams overlain by brackish/marine strata. Hierarchical cluster analysis identified three groups of major minerals and seven groups of trace elements based on similarity levels. On a regional scale, the coalfields can be separated by the differences in rank (Candiota and Leão-Butiá versus Santa Terezinha) and by applying discriminant analysis based on 4 trace elements (Li, As, Sr, Sb). Highest Rb and Sr values occur at Candiota and are linked to syngenetic volcanism of the area, whereas high Y and Sr values at Santa Terezinha can be related to the frequent diabase intrusions in that area.

International Journal of Coal Geology↗

USGS2008

Mineralogical and compositional characteristics of Late Permian coals from an area of high lung cancer rate in Xuan Wei, Yunnan, China: Occurrence and origin of quartz and chamosite

Some townships in Xuan Wei County, Yunnan Province, have one of the highest lung cancer mortality rates in China and the epidemic disease in the area has generally been attributed to the polycyclic aromatic hydrocarbons (PAHs) released from domestic coal burning. However, the cancer-causing culprit is not settled as Tian [Tian, L., 2005. Coal Combustion Emissions and Lung Cancer in Xuan Wei, China. Ph.D. thesis, University of California, Berkeley.] found nanometer quartz in these coals, soot emissions, and lung cancer tissues. We have conducted mineralogical and geochemical studies of the coals from Xuan Wei for the purpose of shedding light on the minerals which may be related to the epidemic lung cancer. In this paper, abundances, modes of occurrence, and origins of minerals and elements in the coals from two mines in Xuan Wei have been studied using optical microscope, low-temperature ashing, X-ray diffraction analysis, scanning electron microscope equipped with energy-dispersive X-ray spectrometer, and inductively-coupled plasma mass spectrometry. The minerals in the coals are mainly composed of quartz, chamosite, kaolinite, and calcite. The particle size of quartz is rather small, mostly less than 20????m and it is of authigenic origin. Chamosite occurs mainly as cell-fillings. The occurrence of quartz and chamosite indicates that they were derived from the hydrothermal fluids. Epigenetic calcite is derived from calcic fluids. Kaolinite is derived mainly from sediment source region of Kangdian Oldland to the west of coal basin. The composition of Xuan Wei coal is high in SiO2, Fe2O3, TiO2, CaO, MnO, V, Co, Ni, Cu, and Zn. The high SiO2 content is attributed to quartz, and the Fe2O3 content to chamosite. The high Mn and low Mg contents in the coal indicate the inputs of hydrothermal fluids. CaO occurs mainly in epigenetic calcite. Elements Ti, Co, Ni, Cu, Zn, and rare earth elements were derived from the basaltic rocks at sediment source region. ?? 2008 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

USGS2010

A high-pyrite semianthracite of Late Permian age in the Songzao Coalfield, southwestern China: Mineralogical and geochemical relations with underlying mafic tuffs

The No. 12 Coal (Late Permian) in the Songzao Coalfield, Chongqing, southwestern China, is characteristically high in pyrite and some trace elements. It is uniquely deposited directly above mafic tuff beds. Samples of coal and tuffs have been studied for their mineralogy and geochemistry using inductively coupled plasma-mass spectrometry, X-ray fluorescence, plasma low-temperature ashing plus powder X-ray diffraction, and scanning electron microscopy equipped with energy-dispersive X-ray analysis.The results show that the minerals of the No. 12 Coal are mainly composed of pyrite, clay minerals (kaolinite, chamosite, and illite), ankerite, calcite, and trace amounts of quartz and boehmite. Kaolinite and boehmite were mainly derived from sediment source region of mafic tuffs. Chamosite was formed by the reaction of kaolinite with Fe-Mg-rich fluids during early diagenesis. The high pyrite (Sp,d=8.83%) in the coal was related to marine transgression over peat deposits and abundant Fe derived from the underlying mafic tuff bed. Ankerite and calcite were precipitated from epigenetic fluids.Chemical compositions of incompatible elements indicate that the tuffs were derived from enriched mantle and the source magmas had an alkali-basalt character. Compared to other coals from the Songzao Coalfield and common Chinese coals, the No. 12 Coal has a lower SiO2/Al2O3 (1.13) but a higher Al2O3/Na2O (80.1) value and is significantly enriched in trace elements including Sc (13.5??g/g), V (121??g/g), Cr (33.6??g/g), Co (27.2??g/g), Ni (83.5??g/g), Cu (48.5??g/g), Ga (17.3??g/g), Y (68.3??g/g), Zr (444??g/g), Nb (23.8??g/g), and REE (392??g/g on average). Above mineralogical compositions, as well as similar ratios of selected elements (e.g., SiO2/Al2O3 and Al2O3/Na2O) and similar distribution patterns of incompatible elements (e.g., the mantle-normalized diagram for incompatible elements and chondrite-normalized diagram for rare earth elements) of coal and tuff, indicated that enriched trace elements above were largely derived from mafic tuffs, in addition to a minor amount from the Kandian Oldland. ?? 2010 Elsevier B.V.

International Journal of Coal Geology↗

USGS2018

Pore-types and pore-network evolution in Upper Devonian-Lower Mississippian Woodford and Mississippian Barnett mudstones: Insights from laboratory thermal maturation and organic petrology

Pore-evolution models from immature organic-matter (OM) -rich Barnett (0.42%R o ) and Woodford (0.49%R o ) mudstones were compared with models previously developed from low-maturity OM-lean Boquillas (Eagle Ford-equivalent) mudstones to investigate whether (1) different mineralogy (siliceous vs. calcareous) exerts different catalytic and sorption effects and influences OM-pore origin and evolution; and (2) different types of macerals show different OM pore evolution history. Laboratory gold-tube pyrolysis, scanning electron microscopy (SEM) and thin-section petrography, organic petrography, and geochemical characterization were used to investigate the role of bulk mineralogy, maceral type, and thermal maturation on OM-pore evolution. Results suggest that mineralogy has little impact on OM-pore development and evolution. Macerals, identified using both SEM (platy OM, particulate OM, organic–mineral admixtures, Tasmanites ) and organic petrology (vitrinite, inertinite, amorphous organic matter [AOM]/bituminite, telalginite [ Leiosphaeridia , Tasmanites ]), do affect the origin and evolution of OM pores owing to differences in chemical compositions, generation kinetics, and activation-energy distributions between Tasmanites , matrix bituminite, and other types of macerals. Leiosphaeridia and Tasmanites in Woodford mudstone samples exhibit a delay in onset and a shorter period of petroleum generation and pore development compared to the matrix bituminite in the Barnett and Woodford mudstone samples. Pre-oil solid bitumen was observed to have migrated into initial primary mineral pore networks at the bitumen generation stage in both Barnett and Woodford samples. At higher levels of thermal maturation, the volume of primary mineral pores decreases and the pore volume composed of modified mineral pores and OM pores becomes greater. Pore evolution and pore-type heterogeneity in these mudstones is a function of the initial mineral pore network, types of kerogen and macerals, and generation kinetics of individual macerals upon thermal maturation.

Oklahoma↗

USGS2021

A review of spatially resolved techniques and applications of organic petrography in shale petroleum systems

This review examines new techniques and applications of organic petrography in source-rock reservoir petroleum systems that have occurred along with development of the global ‘shale revolution’ in energy resources. The review is limited to techniques and instrumentation that provide spatially resolved information, typically at or below microscales, for dispersed organic matter occurring in situ in samples of shale and mudrock. A brief summary of ion beam sample preparation is followed by discussion of the most common analytical techniques and applications. Advantages and limitations of each technique, including requisite sample preparation, types of information generated [e.g., molecular or elemental (isotopic) abundance], sensitivity, and resolution are discussed. In a few cases, techniques not yet applied to organic petrology of shale or mudrock are described (e.g., X-ray photoelectron spectroscopy imaging), in anticipation of near-term future application. The most common in situ techniques applied for characterization of organic matter in shale and mudrock include optical (including fluorescence) and electron microscopies, Raman, fluorescence, and infrared spectroscopies, and surficial measurements via force microscopy. Techniques that show growing application to organic petrography of shale include tip-enhanced photothermal infrared spectroscopy, mass spectrometry imaging, and synchrotron-based spectroscopies, among others. It is anticipated that the future of dispersed organic matter petrography will hold continued development of integrated instrument techniques (e.g., simultaneous or sequential correlative microscopies and/or spectroscopies of the same location), increased instrumental resolution, increased use of multiscale and multimodal organic petrography investigations, and three-dimensional imaging and chemical speciation mapping applications via multiple analytical approaches.

International Journal of Coal Geology↗

USGS2025

Relating systematic molecular and textural properties of graptolite pyrolyzed via gold tube hydrous pyrolysis: Implications for thermal proxies in lower Paleozoic marine shales

A series of gold tube pyrolysis experiments (72 h, 300–550 °C, 50 MPa) conducted on a graptolite-rich lower Paleozoic marine shale generated pyrolysis residues for a comprehensive evaluation of the molecular and structural variability of three types of graptolite periderm. Organic petrology, Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS) were combined to evaluate the thermal evolution process. The three types of graptolite periderm, namely granular, non-granular, and nodular graptolite, were analyzed by Raman spectroscopy wherein point measurements were obtained after the maceral was identified and the location verified by organic petrology. Distinct thermal evolution pathways among non-granular, granular, and nodular graptolite periderms were recorded. The evolution patterns of the Raman parameters, particularly D1 and G bands, highlight the differences in geochemical composition of the graptolite periderm types and the alteration of molecular structure with increasing thermal maturity. Raman parameters D1 (position of the D1 peak), G-FWHM (full width at half maximum of the G peak), and ratios D1-FWHM/G-FWHM (full width at half maximum of the D1 peak ratioed to G-FWHM) and A D1 /A G (ratio of D1 and G peak intensities) showed effectiveness in assessing thermal maturity. Bireflectance with increasing gold tube pyrolysis temperature followed a hierarchy: non-granular > granular > nodular, reflecting different molecular alignment intensities. Qualitative FE-SEM evaluation showed that fine-grained mineral inclusions (primarily Fe-sulfide as determined via EDS) were associated with the graptolite populations, with granular graptolite containing greater amounts of coarser-grained (e.g., ∼300–1400 nm) mineral inclusions relative to non-granular and nodular graptolite, which contain finer-grained (e.g., ∼100–200 nm) inclusions difficult to resolve with optical microscopy. These findings are investigated to highlight the mechanisms that drive organic matter evolution within graptolite during thermal maturation, as well as to explore some of the limitations of using spectroscopic parameters as thermal maturity proxies.

International Journal of Coal Geology↗

USGS2004

Potential involvement of rainbow trout thrombocytes in immune functions: a study using a panel of monoclonal antibodies and RT-PCR

The functional relationship between fish and mammalian thrombocytes is relatively unknown. In this study, a panel of monoclonal antibodies (mAbs) was used to investigate the functional properties of rainbow trout thrombocytes. The mAbs recognize cell-surface molecules on thrombocytes with molecular weights ranging from 17 to 160 kDa. Flow cytometric and immuno-electron microscopic analyses demonstrate that these molecules are expressed at different levels and that surface expression increased upon activation with bovine collagen. Two of these cell-surface molecules (17 and 21 kDa) were directly involved in collagen-induced aggregation of thrombocytes since aggregation was blocked upon pre-treatment with mAbs that recognize the two surface markers. Interestingly, the percentage of thrombocytes in blood increased after stimulation using different antigens. The transcriptional profile of trout thrombocytes was then examined after immuno-magnetic enrichment using the described mAbs to assess potential roles of trout thrombocytes in immune functions. Trout thrombocytes express components of the MHC class Ia pathway, IL1β, TNFα, TGFβ, the interleukin receptor common γ chain as well as CXC and CC chemokines. MHC class IIB and TNFα were expressed at low levels in resting thrombocytes. No evidence was found for the expression of TCRαβ, Ig heavy chain, CD8α or CK1 mRNA. Taken together, these results suggest that rainbow trout thrombocytes express molecules involved in activation, aggregation and genes encoding proteins, that are involved in antigen presentation and immune regulation.

Developmental and Comparative Immunology↗

USGS2013

Nature's refineries — Metals and metalloids in arc volcanoes

Chemical data for fumaroles and for atmospheric gas and ash plumes from active arc volcanoes provide glimpses of the rates of release of metal and metalloids, such as Tl and Cd, from shallow and mid-crust magmas. Data from copper deposits formed in ancient volcanoes at depths of up to about 1500 m in the fractures below paleo-fumaroles, and at around 2000–4000 m in association with sub-volcanic intrusions (porphyry copper deposits) provide evidence of sub-surface deposition of Cu–Au–Ag–Mo and a range of other minor elements including Te, Se, As and Sb. These deposits, or ‘sinks’, of metals consistently record sustained histories of magmatic gas streaming through volcanic systems interspersed by continuing intrusive and eruptive activity. Here we integrate data from ancient and modern volcanic systems and show that the fluxes of metals and metalloids are controlled by a) the maintenance of fracture permeability in the stressed crust below volcanoes and b) the chemical processes that are triggered as magmatic gas, initially undersaturated with metals and metalloids, expands from lithostatic to very low pressure conditions through fracture arrays. The recognition of gas streaming may also account for the phenomenon of ‘excess degassing’, and defines an integral, but generally understated, component of active volcanic systems – a volcanic gas core – that is likely to be integral to the progression of eruptions to Plinean state. Destabilization of solvated molecular metal and metalloid species in magmatic gas mixtures and changes in their redox state are triggered, as it expands to the surface by abrupt pressure drops, or throttles' in the fracture array that guides expansion to the surface. The electronically harder, low electronegativity metals, such as copper and iron, deposit rapidly in response to expansion followed more slowly by arsenic with antimony as sulfosalts. Heavy, large radius, softer elements such as bismuth, lead, and thallium along with cadmium are strongly fractionated along the way, eventually venting their excess along with SO 2 , CO 2 , and other components of the carrier gas, into the atmosphere. These elements, many of which are toxic, may also be dispersed by mixing with groundwater in the permeable crust below volcanoes and generate potential health risks due to Hg, As, and Se contamination of drinking water resources.

Earth-Science Reviews↗

USGS2008

Diurnal variability in turbidity and coral fluorescence on a fringing reef flat: Southern Molokai, Hawaii

Terrigenous sediment in the nearshore environment can pose both acute and chronic stresses to coral reefs. The reef flat off southern Molokai, Hawaii, typically experiences daily turbidity events, in which trade winds and tides combine to resuspend terrigenous sediment and transport it alongshore. These chronic turbidity events could play a role in restricting coral distribution on the reef flat by reducing the light available for photosynthesis. This study describes the effects of these turbidity events on the Hawaiian reef coral Montipora capitata using in situ diurnal measurements of turbidity, light levels, and chlorophyll fluorescence yield via pulse-amplitude-modulated (PAM) fluorometry. Average surface irradiance was similar in the morning and the afternoon, while increased afternoon turbidity resulted in lower subsurface irradiance, higher fluorescence yield (??F/Fm???), and lower relative electron transport rates (rETR). Model calculations based on observed light extinction coeffecients suggest that in the absence of turbidity events, afternoon subsurface irradiances would be 1.43 times higher than observed, resulting in rETR for M. capitata that are 1.40 times higher.

Estuarine, Coastal and Shelf Science↗

USGS2017

Optical and biochemical properties of a southwest Florida whiting event

“Whiting” in oceanography is a term used to describe a sharply defined patch of water that contains high levels of suspended, fine-grained calcium carbonate (CaCO 3 ). Whitings have been reported in many oceanic and lake environments, and recently have been reported in southwest Florida coastal waters. Here, field and laboratory measurements were used to study optical, biological, and chemical properties of whiting waters off southwest Florida. No significant difference was found in chlorophyll a concentrations between whiting and outside waters (non-whiting water), but average particle backscattering coefficients in whiting waters were double those in outside waters, and remote sensing reflectance in whiting waters was higher at all wavelengths (400–700 nm). While other potential causes cannot be completely ruled out, particle composition and biochemical differences between sampled whiting water, contiguous water, and outside water indicate a biologically precipitated mode of whiting formation. Taxonomic examination of marine phytoplankton samples collected during a whiting event revealed a community dominated by autotrophic picoplankton and a small (<10 μm), centric diatom species, identified as Thalassiosira sp. through the use of scanning electron microscopy. Amorphous to fully formed crystals of CaCO 3 were observed along the girdle bands of Thalassiosira sp. cells and autotrophic picoplankton cells. Although carbonate parameters differed from whiting and contiguous to outside water, more sampling is needed to determine if these results are statistically significant.

Florida↗

USGS2011

Reactive-transport modeling of iron diagenesis and associated organic carbon remineralization in a Florida (USA) subterranean estuary

Iron oxides are important terminal electron acceptors for organic carbon (OC) remineralization in subterranean estuaries, particularly where oxygen and nitrate concentrations are low. In Indian River Lagoon, Florida, USA, terrestrial Fe-oxides dissolve at the seaward edge of the seepage face and flow upward into overlying marine sediments where they precipitate as Fe-sulfides. The dissolved Fe concentrations vary by over three orders of magnitude, but Fe-oxide dissolution rates are similar across the 25-m wide seepage face, averaging around 0.21 mg/cm 2 /yr. The constant dissolution rate, but differing concentrations, indicate Fe dissolution is controlled by a combination of increasing lability of dissolved organic carbon (DOC) and slower porewater flow velocities with distance offshore. In contrast, the average rate constants of Fe-sulfide precipitation decrease from 21.9 × 10 − 8 s − 1 to 0.64 × 10 − 8 s − 1 from the shoreline to the seaward edge of the seepage face as more oxygenated surface water circulates through the sediment. The amount of OC remineralized by Fe-oxides varies little across the seepage face, averaging 5.34 × 10 − 2 mg/cm 2 /yr. These rates suggest about 3.4 kg of marine DOC was remineralized in a 1-m wide, shore-perpendicular strip of the seepage face as the terrestrial sediments were transgressed over the past 280 years. During this time, about 10 times more marine solid organic carbon (SOC) accumulated in marine sediments than were removed from the underlying terrestrial sediments. Indian River Lagoon thus appears to be a net sink for marine OC.

Florida↗

USGS2015

Widespread occurrence of (per)chlorate in the Solar System

Perchlorate (ClO− 4 ) and chlorate (ClO− 3 ) are ubiquitous on Earth and ClO− 4 has also been found on Mars. These species can play important roles in geochemical processes such as oxidation of organic matter and as biological electron acceptors, and are also indicators of important photochemical reactions involving oxyanions; on Mars they could be relevant for human habitability both in terms of in situ resource utilization and potential human health effects. For the first time, we extracted, detected and quantified ClO− 4 and ClO− 3 in extraterrestrial, non-planetary samples: regolith and rock samples from the Moon, and two chondrite meteorites (Murchison and Fayetteville). Lunar samples were collected by astronauts during the Apollo program, and meteorite samples were recovered immediately after their fall. This fact, together with the heterogeneous distribution of ClO− 4 and ClO− 3 within some of the samples, and their relative abundance with respect to other soluble species (e.g., NO− 3 ) are consistent with an extraterrestrial origin of the oxychlorine species. Our results, combined with the previously reported widespread occurrence on Earth and Mars, indicate that ClO− 4 and ClO− 3 could be present throughout the Solar System.

Earth and Planetary Science Letters↗

USGS2021

Dating fault damage along the eastern Denali fault zone with hematite (U-Th)/He thermochronometry

Unraveling complex slip histories in fault damage zones to understand relations among deformation, hydrothermal alteration, and surface uplift remains a challenge. The dextral eastern Denali fault zone (EDFZ; southwest Yukon, Canada) bounds the Kluane Ranges and hosts a variety of fault-related rocks, including hematite fault surfaces, which have been exhumed through the brittle regime over a protracted period of geologic time. Scanning electron microscopy-based microtextural observations and hematite (U-Th)/He (hematite He) thermochronometry from these surfaces indicate multiple generations of foliated, high-aspect ratio hematite plates. Single-aliquot hematite He dates ( n = 38 "> n=38 ) from 11 samples range from 11.5 ± 3.2 Ma (2 σ ) to 3.4 ± 2.1 Ma and exhibit moderate inter- and intrasample dispersion. A subset of dates is 15-20 Myr younger than previously published apatite (U-Th)/He dates from collocated host rocks, despite similar closure temperatures, precluding a simple ambient cooling interpretation for our hematite He data. Mixture modeling defines hematite He date populations at ∼8 Ma, ∼6 Ma, and ∼4 Ma, and when combined with microtextural observations, supports episodes of hydrothermal alteration and fault reactivation at aseismic to subseismic slip rates. There is no evidence that hematite experienced deformation- or hydrothermal fluid-related He loss. Hematite He dates overlap previously documented Kluane Ranges surface uplift and shifting dynamics of the Yakutat microplate, pinpointing fault networks and deformation processes that accommodate regional deformation in response to far-field plate boundary processes.

Alaska↗

USGS2004

Geochemical control of microbial Fe(III) reduction potential in wetlands: Comparison of the rhizosphere to non-rhizosphere soil

We compared the reactivity and microbial reduction potential of Fe(III) minerals in the rhizosphere and non-rhizosphere soil to test the hypothesis that rapid Fe(III) reduction rates in wetland soils are explained by rhizosphere processes. The rhizosphere was defined as the area immediately adjacent to a root encrusted with Fe(III)-oxides or Fe plaque, and non-rhizosphere soil was 0.5 cm from the root surface. The rhizosphere had a significantly higher percentage of poorly crystalline Fe (66??7%) than non-rhizosphere soil (23??7%); conversely, non-rhizosphere soil had a significantly higher proportion of crystalline Fe (50??7%) than the rhizosphere (18??7%, P<0.05 in all cases). The percentage of poorly crystalline Fe(III) was significantly correlated with the percentage of FeRB (r=0.76), reflecting the fact that poorly crystalline Fe(III) minerals are labile with respect to microbial reduction. Abiotic reductive dissolution consumed about 75% of the rhizosphere Fe(III)-oxide pool in 4 h compared to 23% of the soil Fe(III)-oxide pool. Similarly, microbial reduction consumed 75-80% of the rhizosphere pool in 10 days compared to 30-40% of the non-rhizosphere soil pool. Differences between the two pools persisted when samples were amended with an electron-shuttling compound (AQDS), an Fe(III)-reducing bacterium (Geobacter metallireducens), and organic carbon. Thus, Fe(III)-oxide mineralogy contributed strongly to differences in the Fe(III) reduction potential of the two pools. Higher amounts of poorly crystalline Fe(III) and possibly humic substances, and a higher Fe(III) reduction potential in the rhizosphere compared to the non-rhizosphere soil, suggested the rhizosphere is a site of unusually active microbial Fe cycling. The results were consistent with previous speculation that rapid Fe cycling in wetlands is due to the activity of wetland plant roots. ?? 2004 Federation of European Microbiological Societies. Published by Elsevier B.V. All rights reserved.

FEMS Microbiology Ecology↗

USGS2004

Biogeochemical transformation of Fe minerals in a petroleum-contaminated aquifer

The Bemidji aquifer in Minnesota, USA is a well-studied site of subsurface petroleum contamination. The site contains an anoxic groundwater plume where soluble petroleum constituents serve as an energy source for a region of methanogenesis near the source and bacterial Fe(III) reduction further down gradient. Methanogenesis apparently begins when bioavailable Fe(III) is exhausted within the sediment. Past studies indicate that Geobacter species and Geothrix fermentens -like organisms are the primary dissimilatory Fe-reducing bacteria at this site. The Fe mineralogy of the pristine aquifer sediments and samples from the methanogenic (source) and Fe(III) reducing zones were characterized in this study to identify microbiologic changes to Fe valence and mineral distribution, and to identify whether new biogenic mineral phases had formed. Methods applied included X-ray diffraction; X-ray fluorescence (XRF); and chemical extraction; optical, transmission, and scanning electron microscopy; and Mössbauer spectroscopy. All of the sediments were low in total Fe content (≈ 1%) and exhibited complex Fe-mineralogy. The bulk pristine sediment and its sand, silt, and clay-sized fractions were studied in detail. The pristine sediments contained Fe(II) and Fe(III) mineral phases. Ferrous iron represented approximately 50% of Fe TOT . The relative Fe(II) concentration increased in the sand fraction, and its primary mineralogic residence was clinochlore with minor concentrations found as a ferroan calcite grain cement in carbonate lithic fragments. Fe(III) existed in silicates (epidote, clinochlore, muscovite) and Fe(III) oxides of detrital and authigenic origin. The detrital Fe(III) oxides included hematite and goethite in the form of mm-sized nodular concretions and smaller-sized dispersed crystallites, and euhedral magnetite grains. Authigenic Fe(III) oxides increased in concentration with decreasing particle size through the silt and clay fraction. Chemical extraction and Mössbauer analysis indicated that this was a ferrihydrite like-phase. Quantitative mineralogic and Fe(II/III) ratio comparisons between the pristine and contaminated sediments were not possible because of textural differences. However, comparisons between the texturally-similar source (where bioavailable Fe(III) had been exhausted) and Fe(III) reducing zone sediments (where bioavailable Fe(III) remained) indicated that dispersed detrital, crystalline Fe(III) oxides and a portion of the authigenic, poorly crystalline Fe(III) oxide fraction had been depleted from the source zone sediment by microbiologic activity. Little or no effect of microbiologic activity was observed on silicate Fe(III). The presence of residual “ferrihydrite” in the most bioreduced, anoxic plume sediment (source) implied that a portion of the authigenic Fe(III) oxides were biologically inaccessible in weathered, lithic fragment interiors. Little evidence was found for the modern biogenesis of authigenic ferrous-containing mineral phases, perhaps with the exception of thin siderite or ferroan calcite surface precipitates on carbonate lithic fragments within source zone sediments.

Geochimica et Cosmochimica Acta↗

USGS2005

Direct observation of heavy metal-mineral association from the Clark Fork River Superfund Complex: Implications for metal transport and bioavailability

Two sets of samples from riverbeds and adjacent floodplains, separated by 80 river kilometers, were collected from the Clark Fork River Superfund Complex, Montana, (the largest Superfund site in the United States), and studied primarily with transmission electron microscopy (TEM) with several supporting techniques to determine heavy metal-mineral association. Seven of the eight samples studied were strongly influenced by material that once resided in mining and smelting dumps and impoundments; this material was transported downstream sometime during the last century and a half from the Butte/Anaconda areas. The eighth sample was from a deeper floodplain level and dates to premining days. The TEM observations afford a direct look, down to the nanometer level, at secondary mineral formation as a result of the breakdown of sulfides and silicates in the acid environment of this massive mine-drainage system. In the shallow, oxic floodplain sediments, heavy metals of concern in this system (As, Cu, Pb, and Zn) are taken up by the formation of sulfates (particularly Pb in jarosite), as well as hydrous metal oxides (As, Cu, Pb, and Zn in and on ferrihydrite, and a possibly new vernadite-like mineral). The oxides are long-lived in these systems, as they were also found in the anoxic riverbeds. Metals are also taken up by the formation of sulfides in sulfate-reducing environments as observed in the formation of nanoclusters of chalcopyrite and sphalerite. In all samples, clays make up between 5 and 20% of the sediment and carry significant amounts of Cu and Zn. The hydrous oxides, secondary sulfides, and clays provide several routes for metal transport downstream over long distances. Besides the potential bioavailability of heavy metals exchanged on and off the hydrous metal oxides and clays, nanometer-sized sulfides may also be highly reactive in the presence of biologic systems. Copyright ?? 2005 Elsevier Ltd.

Geochimica et Cosmochimica Acta↗

USGS2007

Arsenic incorporation into authigenic pyrite, Bengal Basin sediment, Bangladesh

Sediment from two deep boreholes (∼400 m) approximately 90 km apart in southern Bangladesh was analyzed by X-ray absorption spectroscopy (XAS), total chemical analyses, chemical extractions, and electron probe microanalysis to establish the importance of authigenic pyrite as a sink for arsenic in the Bengal Basin. Authigenic framboidal and massive pyrite (median values 1500 and 3200 ppm As, respectively), is the principal arsenic residence in sediment from both boreholes. Although pyrite is dominant, ferric oxyhydroxides and secondary iron phases contain a large fraction of the sediment-bound arsenic between approximately 20 and 100 m, which is the depth range of wells containing the greatest amount of dissolved arsenic. The lack of pyrite in this interval is attributed to rapid sediment deposition and a low sulfur flux from riverine and atmospheric sources. The ability of deeper aquifers (>150 m) to produce ground water with low dissolved arsenic in southern Bangladesh reflects adequate sulfur supplies and sufficient time to redistribute the arsenic into pyrite during diagenesis.

Geochimica et Cosmochimica Acta↗

USGS2008

Organic nitrogen chemistry during low-grade metamorphism

Most of the organic nitrogen (Norg) on Earth is disseminated in crustal sediments and rocks in the form of fossil nitrogen-containing organic matter. The chemical speciation of fossil Norg within the overall molecular structure of organic matter changes with time and heating during burial. Progressive thermal evolution of organic matter involves phases of enhanced elimination of Norg and ultimately produces graphite containing only traces of nitrogen. Long-term chemical and thermal instability makes the chemical speciation of Norg a valuable tracer to constrain the history of sub-surface metamorphism and to shed light on the subsurface biogeochemical nitrogen cycle and its participating organic and inorganic nitrogen pools. This study documents the evolutionary path of Norg speciation, transformation and elimination before and during metamorphism and advocates the use of X-ray photoelectron spectroscopy (XPS) to monitor changes in Norg speciation as a diagnostic tool for organic metamorphism. Our multidisciplinary evidence from XPS, stable isotopes, traditional quantitative coal analyses, and other analytical approaches shows that at the metamorphic onset Norg is dominantly present as pyrrolic and pyridinic nitrogen. The relative abundance of nitrogen substituting for carbon in condensed, partially aromatic systems (where N is covalently bonded to three C atoms) increases exponentially with increasing metamorphic grade, at the expense of pyridinic and pyrrolic nitrogen. At the same time, much Norg is eliminated without significant nitrogen isotope fractionation. The apparent absence of Rayleigh-type nitrogen isotopic fractionation suggests that direct thermal loss of nitrogen from an organic matrix does not serve as a major pathway for Norg elimination. Instead, we propose that hot H, O-containing fluids or some of their components gradually penetrate into the carbonaceous matrix and eliminate Norg along a progressing reaction front, without causing nitrogen isotope fractionation in the residual Norg in the unreacted core of the carbonaceous matrix. Before the reaction front can reach the core, an increasing part of core Norg chemically stabilizes in the form of nitrogen atoms substituting for carbon in condensed, partially aromatic systems forming graphite-like structural domains with delocalized ??-electron systems (nitrogen atoms substituting for "graphitic" carbon in natural metamorphic organic matter). Thus, this nitrogen species with a conservative isotopic composition is the dominant form of residual nitrogen at higher metamorphic grade. ?? 2007 Elsevier Ltd. All rights reserved.

Geochimica et Cosmochimica Acta↗