Search USGS⌕ Search

SEARCH · Search USGS

Results for “Clays and Clay Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources
USGS1992

Mineral and energy resources of the BLM Roswell Resource Area, east-central New Mexico

The sedimentary formations of the Roswell Resource Area have significant mineral and energy resources. Some of the pre-Pennsylvanian sequences in the Northwestern Shelf of the Permian Basin are oil and gas reservoirs, and Pennsylvanian rocks in Tucumcari basin are reservoirs of oil and gas as well as source rocks for oil and gas in Triassic rocks. Pre-Permian rocks also contain minor deposits of uranium and vanadium, limestone, and associated gases. Hydrocarbon reservoirs in Permian rocks include associated gases such as carbon dioxide, helium, and nitrogen. Permian rocks are mineralized adjacent to the Lincoln County porphyry belt, and include deposits of copper, uranium, manganese, iron, polymetallic veins, and Mississippi-valley-type (MVT) lead-zinc. Industrial minerals in Permian rocks include fluorite, barite, potash, halite, polyhalite, gypsum, anhydrite, sulfur, limestone, dolomite, brine deposits (iodine and bromine), aggregate (sand), and dimension stone. Doubly terminated quartz crystals, called "Pecos diamonds" and collected as mineral specimens, occur in Permian rocks along the Pecos River. Mesozoic sedimentary rocks are hosts for copper, uranium, and small quantities of gold-silver-tellurium veins, as well as significant deposits of oil and gas, COa, asphalt, coal, and dimension stone. Mesozoic rocks contain limited amounts of limestone, gypsum, petrified wood, dinosaur remains, and clays. Tertiary rocks host ore deposits commonly associated with intrusive rocks, including platinum group elements, iron skarns, manganese, uranium and vanadium, molybdenum, polymetallic vein deposits, gold-silver- tellurium veins, and thorium-rare earth veins. Museum-quality quartz crystals in Lincoln County were formed in association with intrusive rocks in the Lincoln County porphyry belt. Industrial minerals in Tertiary rocks include fluorite, vein- and bedded-barite, caliche, limestone, and aggregate. Tertiary and Quaternary sediments host important placer deposits of gold and titanium, and minor silver, uranium occurrences, as well as important industrial commodities, including caliche, limestone and dolomite, and aggregate (sand). Quaternary basalt contains sub-ore-grade uranium, scoria, and clay deposits.

New Mexico↗
USGS2010

Spectral characteristics of iron-bearing phyllosilicates: Comparison to Orgueil (CI1), Murchison and Murray (CM2)

Phyllosilicate alteration minerals are commonly found in low petrologic types of carbonaceous chondrites. Previous spectral studies have examined Mg-bearing phyllosilicates with limited success in matching the spectral properties of CM and CI chondrites. Transmission electron microscope and other analytical techniques suggest that Fe-bearing clays are more abundant in CI and CM chondrites than magnesian varieties. Here, we present the results of an examination of the reflectance spectra of Fe-phyllosilicates, including serpentines and berthierines, of which the latter were formerly known as septechlorites. We have measured the diffuse reflectance spectra of powdered samples from 0.3 to 25 ??m. We find that these minerals provide a better spectral match to many of the features seen in CI and CM chondrites, and simple linear combinations of the spectra of both Fe- and Mg-phyllosilicates closely approximate the spectra of CM and CI chondrites.

Meteoritics and Planetary Science↗
USGS1994

Tonsteins and clay-rich layers in coal-bearing intervals of the Eocene Manning formation, east-central Texas

Six samples from clay-rich intervals in the coal-bearing upper part of the Eocene Manning Formation were analyzed by scanning-electron microscopy and energy-dispersive X-ray fluorescence to determine the origin of minerals in the samples. Two samples were from surface-mine exposures of the 3500 coal bed near Bryan, Texas, and the remaining samples were from an exposure of a correlative interval at the Lake Somerville spillway about 60 km (37 mi) southwest of Bryan. Preliminary data suggest that both a 2-cm-thick (0.75-in) claystone from the upper part of the 3500 bed and the upper part of an 11-cm-thick (4.25-in) mudstone from the floor of the lower coal bed at the spillway were derived from volcanic ash falls. Both clay layers identified as possible tonsteins are composed of kaolinite and accessory quartz, euhedral to subhedral zircon, feldspars, and Ca-Al phosphates (crandallite?). Both alkali and plagioclase feldspars are observed in the two samples, but K-feldspar predominates in the upper clay layer of the 3500 bed, and plagioclase, with accessory Ti-bearing biotite, predominates in the sample from the floor of the spillway. These compositional differences suggest two separate volcanic ash falls. The other sampled clay layers contain rounded to subrounded zircons and feldspars in a mixed-layer clay groundmass, which suggests detrital rather than ash-fall origins.

Texas↗
USGS1981

Geologic mapping of Kentucky: A history and evaluation of the Kentucky Geological Survey--U.S. Geological Survey Mapping Program, 1960-1978

In 1960, the U.S. Geological Survey and the Kentucky Geological Survey began a program to map the State geologically at a scale of 1:24,000 and to publish the maps as 707 U.S. Geological Survey Geologic Quadrangle Maps. Fieldwork was completed by the spring of 1977, and all maps were published by December 1978. Geologic mapping of the State was proposed by the Kentucky Society of Professional Engineers in 1959. Wallace W. Hagan, Director and State Geologist of the Kentucky Geological Survey, and Preston McGrain, Assistant State Geologist, promoted support for the proposal among organizations such as Chambers of Commerce, industrial associations, professional societies, and among members of the State government. It was also arranged for the U.S. Geological Survey to supply mapping personnel and to publish the maps; the cost would be shared equally by the two organizations. Members of the U.S. Geological Survey assigned to the program were organized as the Branch of Kentucky Geology. Branch headquarters, including an editorial staff, was at Lexington, Ky., but actual mapping was conducted from 18 field offices distributed throughout the State. The Publications Division of the U.S. Geological Survey established a cartographic office at Lexington to prepare the maps for publication. About 260 people, including more than 200 professionals, were assigned to the Branch of Kentucky Geology by the U.S. Geological Survey at one time or another. The most geologists assigned any one year was 61. To complete the mapping and ancillary studies, 661 professional man-years were required, compared with an original estimate of 600 man-years. A wide variety of field methods were used, but most geologists relied on the surveying altimeter to obtain elevations. Surface data were supplemented by drill-hole records, and several dozen shallow diamond-drill holes were drilled to aid the mapping. Geologists generally scribed their own maps, with a consequent saving of publication costs. Paleontologists and stratigraphers of the U.S. Geological Survey cooperated closely with the program. Paleontologic studies were concentrated in the Ordovician of central Kentucky, the Pennsylvanian of eastern and western Kentucky, and the Mesozoic and Cenozoic of westernmost Kentucky. In addition to financial support, the Kentucky Geological Survey provided economic data, stratigraphic support, and drillhole records to the field offices. Geologists of the State Survey made subsurface structural interpretations, constructed bedrock topography maps, and mapped several quadrangles. Some of the problems encountered were the inadequacy of much of the existing stratigraphic nomenclature, the uneven quality of some of the mapping, and the effects of relative isolation on the professional development of some of the geologists. The program cost a total of $20,927,500. In terms of 1960 dollars, it cost $16,035,000; this compares with an original estimate of $12,000,000. Although it is difficult to place a monetary value on the geologic mapping, the program has contributed to newly discovered mineral wealth, jobs, and money saved by government and industry. The maps are used widely in the exploration for coal, oil and gas, fluorspar, limestone, and clay. The maps are also used in planning highways and locations of dams, in evaluating foundation and excavation conditions, in preparing environmental impact statements, and in land-use planning.

Kentucky↗
USGS1954

The copper and uranium deposits of the Coyote district, Mora County, New Mexico

The copper and uranium-vanadium deposits of the Coyote district, Mora County, N. Mec, are confined to the lower 2,000 feet of the Sangre de Gristo formation of Pennsylvanian and Permian age. A narrow belt of deposits in steeply dipping or overturned rocks extends for 7 miles along Coyote Creek south of Guadalupita. Earlier studies showed that the copper deposits contained uranium, but both the reserves and the uranium content of the copper-bearing shale are too low to permit the recovery of uranium. However, small, commercial grade uranium deposits have been discovered in sandstone. Small lenses of copper-bearing carbonaceous shale, siltstone, limestone or sandstone, interbedded with predominantly red rocks, are present at intervals at 12 or more stratigraphic levels. The better deposits, in carbonaceous shale, average about 2 percent copper. The copper content of the other rocks is usually lower, but small concentrations may contain 6 percent copper. The principal copper minerals are chalcocite and malachite. Chalcocite replaces wood and forms nodules that contain small, variable amounts of pyrite, bornite, covellite, and rarely, uraninite. The uranium deposits occur as small closely spaced pockets that are commonly localized by sedimentary structures within one or more fluviatile arkosic sandstone beds near the middle of the formation, particularly" where carbonized wood, clay galls, and rock fragments are abundant. The uraniferous sandstone is commonly stained pink by hematite that probably was introduced with the uranium. The color increases in intensity with the radioactivity. The outcrops of the uranium deposits are typically inconspicuous, but close inspection shows they contain malachite, chalcopyrite, black vanadium minerals of micaceous habit, metatyuyamunite and microscopic grains of an unidentified black uraniferous substance. The proportion of copper, uranium, and vanadium is variable and any metal may be dominant. The metals probably were derived from pre-Cambrian granitic rocks. Copper and minor amounts of uranium were deposited in local stagnant basins by reaction with hydrogen sulfide. and decaying organic material. The uraniferous shales and the copper deposits are believed to be syngenetic, or nearly so, but the uranium deposits in sandstone are epigenetic and probably were deposited from ground waters with a possible hydrothermal admixture. The uranium and vanadium may have been reconcentrated from earlier, low-grade, syngenetic deposits.

New Mexico↗
USGS2008

Paleoclimatic significance of chemical weathering in loess-derived paleosols of subarctic central Alaska

Chemical weathering in soils has not been studied extensively in high-latitude regions. Loess sequences with modern soils and paleosols are present in much of subarctic Alaska, and allow an assessment of present and past chemical weathering. Five sections were studied in detail in the Fairbanks, Alaska, area. Paleosols likely date to mid-Pleistocene interglacials, the last interglacial, and early-to-mid-Wisconsin interstadiale. Ratios of mobile (Na, Ca, Mg, Si) to immobile (Ti or Zr) elements indicate that modern soils and most interstadial and interglacial paleosols are characterized by significant chemical weathering. Na2O/TiO2 is lower in modern soils and most paleosols compared to parent loess, indicating depletion of plagioclase. In the clay fraction, smectite is present in Tanana and Yukon River source sediments, but is absent or poorly expressed in modern soils and paleosols, indicating depletion of this mineral also. Loss of both plagioclase and smectite is well expressed in soils and paleosols as lower SiO 2/TiO2. Carbonates are present in the river source sediments, but based on CaO/TiO2, they are depleted in soils and most paleosols (with one exception in the early-to-mid-Wisconsin period). Thus, most soil-forming intervals during past interglacial and interstadial periods in Alaska had climatic regimes that were at least as favorable to mineral weathering as today, and suggest boreal forest or acidic tundra vegetation. ?? 2008 Regents of the University of Colorado.

Arctic, Antarctic, and Alpine Research↗
USGS1996

Porosity factors that control the hydraulic conductivity of soil-saprolite transitional zones

Slowly permeable transitional horizons separate soil and saprolite, but these horizons cannot be identified easily in the field. The objectives of this study were to determine why the soil-saprolite transitional zone (BC and CB horizons) is slowly permeable, and to evaluate ways for identifying it in the field. Two saprolite deposits were studied in the North Carolina Piedmont. At each site, saturated and unsaturated hydraulic conductivities ( K sat and K unsat ) were measured for major horizons. Volume fractions of water-conducting pores were also compared with the changes in hydraulic conductivity with depth. Horizon mean K sat values at both sites ranged from virtually 0 to approximately 3 cm h -1 . The lowest K sat values (<0.3 cm h -1 ) occurred in or near the transitional horizons that were directly below the Bt horizons. Changes in the volume of pores within or between mineral grains (termed inter/intraparticle pores ) with depth corresponded to changes in both K sat and K unsat . In the transitional horizons, the inter/intraparticle pores were plugged with clay and this caused the horizons to have low K values. In situ measurements of K sat with depth were the most accurate technique to use for identifying transitional zones in the field. Examination of both the soil and rock structures in pits was also an acceptable technique. Texture and consistence were not considered reliable for pin-pointing transitional horizons.

North Carolina↗
USGS2004

Petrography and character of the bedrock surface beneath western Cape Cod, Massachusetts

Cores collected during recent drilling in western Cape Cod, Massachusetts provide insight into the topography and petrology of the underlying bedrock. 62 drill sites spread over a ???140 km2 study area produced cores of granitoids (31), orthogneisses (20), basalts/diabases (4), amphibolites (3), felsic mylonites (2), and dolomitic rock (2). Granitoid cores range in composition from granite to tonalite to quartz diorite, but are dominated by single-mica granites. Alteration is common in nearly all cores examined in this study, and is evidenced by the secondary growth of chlorite and epidote. The granitoids resemble rocks of the Dedham and Fall River terranes (Wones and Goldsmith 1991). Gneisses from the study area generally contain the mineral assemblage hornblende+plagioclase+quartz+biotite+epidote??chlorite?? sphene??K-feldspar??sericite+oxides. Based on mineral assemblages, we estimate peak metamorphic grade to be of lower amphibolite facies. X-ray powder diffraction of unmetamorphosed dolomitic cores shows presence of layered silicates (clays), plagioclase, and possible magnesite. Contours of the bedrock surface show locally irregular topography suggesting erosion by glacial scour. The distribution of lithologies suggests a possible continuation of the New Bedford gneissic terrane that outcrops 25 km to the west. Dolomitic rocks may represent a lithified fault gouge material at the eastern edge of the gneissic zone. Basalts/diabases are interpreted to be post-metamorphic dikes of Late Paleozoic age, or possibly associated with Mesozoic rifting.

Massachussets↗
USGS2025

Deformation mechanisms in quartz veins and shear zones elucidate the origin of gold mineralization at Pogo, Alaska

Pogo is a quartz vein hosted, ca. 8 Moz gold deposit. Although it has similarities to orogenic and magmatic-hydrothermal deposits, its origin remains enigmatic. Observations from surface exposures, underground workings, and drill core provide new constraints on quartz vein origins with implications for mineralization. Abundant, largely barren metamorphic segregation quartz veins are found throughout interior Alaska and share characteristics with mineralized quartz veins at Pogo. Pogo quartz veins show crystal plastic deformation fabrics consistent with greenschist to amphibolite facies metamorphism and a lack of internal shear. In contrast, gold in Pogo quartz veins occurs in brittle microfaults and fractures with sulphides such as arsenopyrite and pyrrhotite. Major and minor cataclastic shear zones also exist at Pogo. Cataclastic shear zones commonly cut the mineralized quartz veins and porphyroclasts are dominated by quartz with the same plastic deformation fabrics found in the major Pogo quartz veins. The porphyroclasts, and the carbonaceous clay-rich matrix they sit in, also contain gold indicating that the shear zones postdate quartz and earliest gold deposition. These observations suggest that competency contrasts between the quartz veins and their phyllosilicate-rich host rocks controlled transient permeability formed by late, preferential brittle deformation events localizing sulphide ± gold deposition.

Alaska↗
USGS1957

Geology and ground-water resources of Galveston County, Texas

Galveston County, on the Texas gulf coast, is underlain by alternating beds of sand and clay. These sand and clay strata crop out in belts that roughly parallel the coastline and dip gently southeastward at an angle gre? +,er than the slope of the land, thereby creating artesian aquifers. The formations that yield potable water to wells are the Lissie formation, the "Alta Loma" sand and other sands of the Beaumont clay, and beach and dune sands of Recent aie. Most of the potable water is obtained on the mainland of Galveston County. The water from most wells on Galveston Island is highly mineralized. Before 1948, water for all public use and nearly all industrial use was derived from wells. Most ground water now used in the county is pumped from areas around Alta Loma and Texas City. The average daily pumpage in these areas increased from 6 million gallons in 1938 to 17.8 million gallons in 1940 and reached a peak of about 34 million gallons in 1945. Between 1945 and 1948 the rate of pumpage was nearly constant, but in 1948 surface water was diverted from the Brazos River to supply some of the Texas City industries and, as a result, the use of ground water was reduced about 30 percent. Water levels declined in county wells as the pumpage increased during the years prior to 1948. Since water from the Brazos River has been utilized the levels have risen in many wells and tended to become constant in others. Subsidence of the land in a large part of the county, particularly in the Texas City area, is attributed to the excessive withdrawal of ground water. Salt-water encroachment has been a problem in the county for many years. Salt water was present in the lower part of the "Alta Loma" sand in the Alta Loma and Texas City areas and throughout that sand on Galveston Island when the first wells were drilled. Encroachment from either below or downdip took place with the lowering of artesian pressure in the aquifer in the vicinity of Alta Loma and Texas City. Pumping tests reveal that the average coefficient of transmissibility of the "Alta Loma" sand is 102,000 at Alta Loma and 153,000 at Texas City. The coefficients- of transmissibility of sands in the upper part of the Beaumont clay around Texas City average 27,300. Surface water from the Brazos River, used for the irrigation of rice since 1942, was made available in 1948 to industries in Texas City as a substitute for ground water. The water from the Brazos River is variable in quality, but probably can be utilized on a somewhat larger scale than at present. Much additional ground water could be obtained from both the "Alta Loma" sand and the upper part of the Beaumont clay, especially in the northern and western parts of the county. Before large developments of supplies are planned, however, these areas should be explored by test drilling. The problems of well spacing and pumping rates should be thoroughly studied in order to determine the maximum development permitted by the ground-water supply. Current observations should be continued with special emphasis on the progress of salt-water encroachment.

Water Supply Paper↗
USGS1976

Mineral resources of Elko County, Nevada

Of the 66 named mining districts in Elko County, 56 have been productive of one or more of 19 different commodities: 11 metals--copper, gold, silver, lead, zinc, mercury, tungsten, manganese, iron, uranium, and antimony; 8 nonmetals--sand and gravel, stone, barite, diatomite, gems, oil shale, volcanic ash, and clay. In addition to the commodities produced, at least 5 others--beryllium, molybdenum, tin, phosphorite, and petroleum, occur in amounts sufficient to warrant exploration. The other districts have been explored, but no production has been recorded. Total value-when-sold of production recorded through 1969 was nearly $91 million; actual production was considerably greater, especially if sand and gravel, barite, and other nonmetallic products before 1953 are included. In value of metals produced, the five highest districts are Mountain City ($26 million), Tuscarora ($11 million), Jarbidge ($10 million), Aura ($6 million), and Railroad (nearly $5 million). The Rio Tinto copper mine in the Mountain City district yielded $21 million. Of the 17 districts that produced nonmetallic minerals, Bootstrap .is the largest producer, containing the Rossi mine, one of the two largest barite mines in the United States. Most of /he metals produced name from veins and replacement deposits in limestone or dolomite near granitic stocks; exceptions are manganese and mercury, which are not associated with known or inferred stocks; mercury is further excepted because it occurs in volcanic rocks, as do a few deposits of the major metals. The largest deposit--the Rio Tinto lode--was a combination of fissure filling and replacement along a bedding plane shear zone 150 ft wide and 1,200 ft long in carbonaceous shale of the Valmy Formation; this deposit is apparently older than the Mountain City stock and its mineralization may be related to Paleozoic mafic volcanism later than a major thrust fault, inferred to underlie the area at a depth of about 5,000 ft. Most of the nonmetallic minerals mined were sedimentary bedded deposits, but mica was mined from pegmatite deposits, and turquoise from both placer and hydrothermal deposits. The largest known reserves of metals (1973) are of porphyry copper in the Dolly Varden district and gold in the Bootstrap district. Reserves of barite also are presumed to be large. The greatest potential for future production of metals, notably copper and gold, appears to be in the known districts or extensions of them and peripheral to deposits that are related to known or concealed plutons and thrust faults. Potential resources in deposits too low in grade to be worked profitably at the present time include all commodities that have been produced and, in addition, known, deposits of beryllium, molybdenum, tin, and phosphorite. Speculative resources in undiscovered deposits may reasonably be predicted to include all known commodities as well as others that are unsuspected. Petroleum may yet be produced from the Elko Formation and geothermal energy from the Ruby Valley and Elko areas.

Open-File Report↗
USGS2026

Evidence for a biological origin of uranium-rich carbon masses within the Ediacaran Salt Range Formation of Pakistan

Thucholites are unique organic structures found in igneous and sedimentary rocks composed of a U-C-rich interior enclosed by an organic outer shell. Their formation and occurrence have perplexed scientists for over 100 years. Typically, thucholites are sparse in sedimentary rocks but where found in abundance, they may be the result of rapid paleoecological disruptions, e.g., volcanic ashfall. Here, we evaluated thucholites from the Ediacaran Salt Range Formation of the Indus Basin in Pakistan using field emission scanning electron microscopy (FESEM) and nanoscale secondary ion mass spectroscopy (NanoSIMS) to propose a two-stage mechanism for thucholite development. NanoSIMS results suggest organic matter in thucholite cores formed by biological fractionation (represented by the presence of lighter 13 C/ 12 C and 34 S/ 32 S) while the outer organic mantle formed via radiolysis-induced polymerization. FESEM elemental analysis confirms compositional differences between the two thucholite components (core and mantle), further implying their contrasting origins. Dimensional comparison of thucholite cores and their U-bearing mineral morphologies to ancient and modern U-biomineralized microbes suggests that the thucholite cores formed from metal-biological interactions. The presence of volcanogenic biotite, alkali feldspar, and clay spherules (interpreted as devitrified volcanic glass) with thucholite suggests that the thucholite cores in the Salt Range Formation are biological responses to rapid paleoenvironmental change from volcanic eruption which preserved the fossilized morphologies of Proterozoic microorganisms.

Salt Range↗
USGS2004

Geochemistry of Mercury and other trace elements in fluvial tailings upstream of Daguerre Point Dam, Yuba River, California, August 2001

This study was designed to characterize the particle-size distribution and the concentrations of total mercury (HgT), methylmercury (MeHg), and other constituents in sediments trapped behind Daguerre Point Dam, a 28-foot-high structure on the lower Yuba River in California. The results of the study will assist other agencies in evaluating potential environmental impacts from mobilization of sediments if Daguerre Point Dam is modified or removed to improve the passage of anadromous fish. Methylmercury is of particular concern owing to its toxicity and propensity to bioaccumulate. A limited amount of recent work on hydraulic and dredge tailings in other watersheds has indicated that mercury and MeHg concentrations may be elevated in the fine-grained fractions of placer mining debris, particularly clay and silt. Mercury associated with tailings from placer gold mines is a source of continued contamination in Sierra Nevada watersheds and downstream water bodies, including the Sacramento?San Joaquin Delta and the San Francisco Bay of northern California. Churn drilling was used to recover sediments and heavy minerals at 5-foot intervals from six locations upstream of Daguerre Point Dam. Maximum depth of penetration ranged from 17.5 to 35 feet below land surface, resulting in 31 discreet drilled intervals. Drilling in permeable, unconsolidated sediments below the streambed of the Yuba River released a significant volume of water along with the sediment, which complicated the sampling and characterization effort. Overflow of a silty fraction sampled at the drill site contained suspended sediment consisting predominantly of silt and clay, with HgT concentration ranging from 33 to 1,100 ng/g (nanogram per gram) dry weight. A sandy fraction, collected after sieving sediment through a 2-millimeter vibratory screen, contained from 14 to 82 percent sand and 1 to 29 percent silt plus clay, and had HgT concentrations ranging from 6.8 to 81 ng/g dry weight. A clay-silt fraction, sampled from material remaining in suspension after the sandy fraction settled for 15-20 minutes, contained mercury concentrations from 23 to 370 ng/g dry weight. Concentrations of MeHg were less than the detection limit (<0.001 ng/g dry weight) in 30 of 31 samples of the sandy fraction. In the suspended clay-silt fraction, MeHg was detected in 16 of 31 samples, in which it ranged in concentration from 0.04 (estimated) to 0.61 ng/g wet weight. Potential rates of mercury methylation and demethylation were evaluated in seven samples using radiotracer methods. Mercury methylation (MeHg production) potentials were generally low, ranging from less than 0.15 to about 1.6 ng/g/d (nanogram per gram of dry sediment per day). Mercury demethylation (MeHg degradation) potentials were moderately high, ranging from 1.0 to 2.2 ng/g/d. The ratio of methylation potential (MP) to demethylation potential (DP) ranged from less than 0.14 to about 1.4 (median = 0.24, mean = 0.44, number of samples = 7), suggesting that the potential for net production of MeHg in deep sediments is generally low. The MeHg production rates and MP/DP ratios were higher in the shallower interval in two of the three holes where two depth intervals were assessed, whereas the MeHg concentrations were higher in the shallower interval for all three holes. A similar spatial distribution was found for concentrations of solid-phase sulfide (measured as total reduced sulfur and likely representing iron-sulfide and iron-disulfide compounds), which were much higher in shallower samples (about 700 to about 2,100 nanomoles per gram, dry sediment) than in deeper samples (32 to 55 nanomoles per gram, dry sediment) in these three holes. If reduced sulfur compounds are oxidized to sulfate as a consequence of sediment disturbance, the activity of sulfate-reducing bacteria might be stimulated, causing a short-term increase in methylation of inorganic Hg(II) (divalent mercury).

California↗
USGS2007

Sedimentary rock-hosted Au deposits of the Dian-Qian-Gui area, Guizhou, and Yunnan Provinces, and Guangxi District, China

Sedimentary rock-hosted Au deposits in the Dian-Qian-Gui area in southwest China are hosted in Paleozoic and early Mesozoic sedimentary rocks along the southwest margin of the Yangtze (South China) Precambrian craton. Most deposits have characteristics similar to Carlin-type Au deposits and are spatially associated, on a regional scale, with deposits of coal, Sb, barite, As, Tl, and Hg. Sedimentary rock-hosted Au deposits are disseminated stratabound and(or) structurally controlled. The deposits have many similar characteristics, particularly mineralogy, geochemistry, host rock, and structural control. Most deposits are associated with structural domes, stratabound breccia bodies, unconformity surfaces or intense brittle-ductile deformation zones, such as the Youjiang fault system. Typical characteristics include impure carbonate rock or calcareous and carbonaceous host rock that contains disseminated pyrite, marcasite, and arsenopyrite-usually with ??m-sized Au, commonly in As-rich rims of pyrite and in disseminations. Late realgar, orpiment, stibnite, and Hg minerals are spatially associated with earlier forming sulfide minerals. Minor base-metal sulfides, such as galena, sphalerite, chalcopyrite, and Pb-Sb-As-sulphosalts also are present. The rocks locally are silicified and altered to sericite-clay (illite). Rocks and(or) stream-sediment geochemical signatures typically include elevated concentrations of As, Sb, Hg, Tl, and Ba. A general lack of igneous rocks in the Dian-Qian-Gui area implies non-pluton-related, ore forming processes. Some deposits contain evidence that sources of the metal may have originated in carbonaceous parts of the sedimentary pile or other sedimentary or volcanic horizons. This genetic process may be associated with formation and mobilization of petroleum and Hg in the region and may also be related to As-, Au-, and Tl-bearing coal horizons. Many deposits also contain textures and features indicative of strong structural control by tectonic domes or shear zones and also suggest syndeformational ore deposition, possibly related to the Youjiang fault system. Several sedimentary rock-hosted Au deposits in the Dian-Qian-Gui area also are of the red earth-type and Au grades have been concentrated and enhanced during episodes of deep weathering. ?? 2006 Elsevier B.V. All rights reserved.

Ore Geology Reviews↗
USGS1973

Geology and mineral resources of central Antioquia Department (Zone IIA), Colombia

This report summarizes the geology of an area of some 6000 square kilometers in the northern part of the Central Cordillera of the Colombian Andes. The area, in north-central Department of Antioquia, was mapped between 1964 and 1968 as part of the Inventario Minero Nacional (IMN) project. Mineral resources are summarized within a larger area, designated as subzone ILK of IMN Zone If, which comprises almost 22,000 sq. kin, including the area mapped geologically by IMN and additional areas mapped by other agencies. The oldest formation is a micaceous paragneiss of early Paleozoic or possibly late Precambrian age. A thick geosynclinal sedimentary series accumulated during the Paleozoic Era and became regionally metamorphosed to greenschist (locally amphibolite) facies during the Permian or early Triassic; these schists and gneisses are designated collectively as the Valdivia Group. The Permian(?) orogenic episode included intrusion of concordant syntectonic plutons, mostly of tonalitic composition. Rocks of unequivocal Triassic or Jurassic age are not recognized. The Cretaceous is well represented by both igneous and sedimentary assemblages. Eugeosynclinal alpine ophiolites comprising submarine basalt flows and numerous intrusions of gabbro and serpentinite are prominent in the Lower Cretaceous, together with flysch composed of marine shale and lesser sandstone and conglomerate. The Upper Cretaceous is represented along the west border of the mapped area by submarine basalt flows and pyroclastic rocks, locally Interbedded with fine-grained clastic sedimentary beds, and lenses of dark laminated chert, at least part of which is radiolarian. The Late Cretaceous was marked by an orogenic event that profoundly folded and faulted all rocks and in the Central Cordillera caused low-grade metamorphism, the overprint of which is hardly observable in pre-Cretaceous rocks elsewhere. The Late Cretaceous orogeny culminated with discordant intrusion of the epizonal tonalitic Antioquian batholith. Displacement along the great Romeral wrench fault may have begun in the Cretaceous. Plutonism continued into the Cenozoic, exemplified by the hornblende-diorite Sabanalarga pluton. Intermontane basins were filled with molasse derived from the erosion of adjacent highlands; Tertiary sedimentation in marshy areas included organic carboniferous matter subsequently converted to lignite or subbituminous coal. The Sabanalarga fault system originated in the Late Tertiary; intermittent displacement continued on the older wrench faults such as the Romeral. Epeirogenic uplift, which probably began in the Pliocene and continued through the Pleistocene and Holocene, brought on renewed erosion which has sculptured the mountains into their present form. Mineral resources in subzone IIA are varied but not of outstanding importance. Gold and silver mining, significant in past centuries, is minor today. Ferruginous laterite on serpentinite once considered as a potential source of iron ore is not economically exploitable. IMN has explored nickeliferous laterite at the extreme northwest corner of subzone IIA; this is a potential resource, exploitable only after exhaustion of the larger and richer nickel laterite deposit at Cerro Matoso, farther to the north and outside the boundaries of Zone If. Known deposits of mercury, chromium, manganese, and copper are small, with limited economic potential. Nonmetallic resources include raw materials for cement, including portland cement. Saprolite clay is widely used in making common red brick and tile, still a dominant construction material in all but the most modern multistory buildings. Aggregate materials are varied and abundant. Kaolin of good quality near La Union is important as a ceramic raw mineral filler. Tertiary subbituminous coal beds are an important energy resource in western subzone IIA, and have a good potential for greater development. Deposits of sodic feldspar, talc, decorative stone, and silica a

Open-File Report↗
USGS1954

Carnotite-bearing sandstone in Cedar Canyon, Slim Buttes, Harding County, South Dakota

Carnotite-bearing sandstone and clay have been found in the Chadron formation of the White River group of Oligocene age in the southern part of the Slim Buttes area, Harding County, S. Dak. Locally the mineralized sandstone contains as much as 0.23 percent uranium. The uranium and vanadium ions are believed to have been derived from the overlying mildly radioactive tuffaceous rocks of the Arikaree formation of Miocene age. Analyses of water from 26 springs issuing from the Chadron and Arikaree formations along the margins of Slim Buttes show uranium contents of as much as 200 parts per billion. Meteoric water percolating through tuffaceous rocks is thought to have brought uranium and other ions into environments in the Chadron formation that were physically and chemically favorable for the deposition of carnotite.

South Dakota↗