Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geological Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS1975

Geology, geochemistry, and fluid-inclusion petrography of the Sapo Alegre porphyry copper prospect and its metavolcanic wallrocks, west-central Puerto Rico

The Sapo Alegre prospect, a small porphyry copper-molybdenum occurrence in west-central Puerto Rico, is characterized by distinct zones of alteration and mineralization of quartz diorite porphyry. A biotite-chlorite zone in the porphyry near its contact with surrounding metavolcanic rocks contains copper, molybdenum, gold, silver, selenium, and tellurium. A quartz-sericite-pyrite zone within the porphyry contains abundant sulfur and traces of selenium, but metals of the biotite-chlorite zone are nearly absent and zinc, manganese, nickel, sodium, calcium, and magnesium contents are very low. Quartz grains in the biotite-chlorite zone contain abundant fluid inclusions in which halite crystals are common, whereas in the quartz-sericite-pyrite zone inclusions are less abundant and rarely contain halite inclusions. Metavolcanic rocks northwest of the mineralized porphyry are altered to amphibolitic hornfels near the contact. Biotitic alteration is strong outward from the hornfels and grades into chlorite alteration. The hornfels has very low sulfide content, and the biotite zone has moderate amounts of copper and sulfur, decreasing outward. The chlorite zone is characterized by an abrupt increase in zinc and manganese content. Fluid-inclusion data suggest temperatures between 300° and 400°C for hydrothermal fluids in the biotite-chlorite zone of the porphyry and 250° to 300°C for fluids in the quartz-sericite-pyrite zone. Pressures equivalent to about 1.5 km of burial are indicated.

Río Víví district↗
USGS1973

Geologic implications of the Apollo 14 Fra Mauro breccias and comparison with ejecta from the Ries Crater, Germany

On the basis of petrographic and laboratory and active seismic data for the Fra Mauro breccias, and by comparison with the nature and distribution of the ejecta from the Ries crater, Germany, some tentative conclusions regarding the geologic significance of the Fra Mauro Formation on the moon can be drawn. The Fra Mauro Formation, as a whole, consists of unwcldcd, porous ejecta, slightly less porous than the regolith. It contains hand-specimen and larger size clasts of strongly annealed complex breccias, partly to slightly annealed breccias, basalts, and perhaps spherule-rich breccias. These clasts are embedded in a matrix of porous aggregate dominated by mineral and breccia fragments and probably largely free of undevitrified glass. All strongly annealed hand-specimen-size breccias are clasts in the Fra Mauro Formation. To account for the porous, unwelded state of the Fra Mauro Formation, the ejecta must have been deposited at a temperature below that required for welding and annealing. Large boulders probably compacted by the Cone crater event occur near the rim of the crater. They probably consist of a similar suite of fragments, but are probably less porous than the formation. The geochronologic clocks of fragments in the Fra Mauro Formation, with textures ranging from unannealed to strongly annealed, were not reset or strongly modified by the Imbrian event. Strongly annealed breccia clasts and basalt clasts are pre-Imbrian, and probably existed as ejecta mixed with basalt flows in the Imbrium Basin prior to the Imbrian event. The Imbrian event probably occurred between 3.90 or 3.88 and 3.65 b.y. ago.

Ries Crater↗
USGS1977

Geology of the gabbroic complex along the northern border of the Josephine Peridotite, Vulcan Peak area, southwestern Oregon

The terrane bordering the alpine-type Josephine Peridotite on the north in the Vulcan Peak area, southwestern Oregon, is composed of intrusive hornblende gabbro (Middle Jurassic) and scattered remnants of clinopyroxene-bearing ultramafic rocks and amphibolite. The amphibolite, which preliminary analyses suggest is of andesitic composition, has undergone regional metamorphism to the amphibolite facies and three episodes of plastic folding. The ultramafic rocks overlie the amphibolite with a possible magmatic sedimentary contact, although the contact is not entirely clear and a fault cannot be ruled out. The ultramafic rocks are partially recrystallized owing to the gabbro intrusion and later partially serpentinized; they have undergone two episodes of plastic folding, the second of which correlates with the third in the amphibolite. The intrusion of the gabbro began as early as the second folding episode in the amphibolite and probably continued at least intermittently throughout the third episode of folding and possibly later. After the high-temperature deformation, the Josephine Peridotite was thrust northward over the gabbroic complex along an east-striking south-dipping thrust fault, after which both of these terranes were thrust westward over the Upper Jurassic Dothan Formation along a major north-striking east-dipping thrust fault. The nature of the ultramaflc rocks, their association with an extensive gabbro terrane, and the proximity of a large alpine-type peridotite suggest that the gabbroic and ultramafic complexes are part of an ophiolite sequence. However, if the ultramaflc rocks are cumulates and were deposited on the amphibolite terrane, then the gabbroic complex is somewhat different from the ideal ophiolite model.

Oregon↗
USGS1976

Geology of central Costa Rica and its implications in the geologic history of the region

The oldest rocks in Costa Rica, the Nicoya Complex, crop out in an arcuate belt along the Pacific coast and outside the mapped area. The complex is an ophiolite assemblage and indicates that a Late Cretaceous arc-trench system, probably a southerly extension of the Middle America Trench, lay along and west of the present Pacific coast. Polarity of the system is indicated by the presence of a volcanic olivine basalt arc east of the ophiolite belt and by a younger magmatic arc farther east. Relative lack of metamorphism of the ophiolite assemblage suggests that the rocks were obducted rather than subducted. Fossil evidence indicates that the complex was emplaced no later than the late Campanian. By the late Eocene both the ophiolite assemblage and the olivine basalt arc had been established as major sediment sources for basins that lay to the east, and they continued as such through the Oligocene and possibly into the middle Miocene. Widespread deposition of trachyandesite lava and volcaniclastic sediments, local marine planation, uplift, and renewed volcanism mark what is presumed to be the end of the Miocene. Extreme south-to-north coarsening of the unconformably superposed Doan Formation and the presence of corals in the shaly facies of the Doan in the southern part of the mapped areas suggest that marine sedimentation there was undisturbed by orogeny and that intrusion of the Talamancan magmatic rocks must have followed deposition of the Doan. Volcaniclastic block breccia, characteristic of northern exposures of the Doan, indicates that volcanism in the proto- Cordillera Central had begun by at least Doan time. Volcanism has been a dominant process in central Costa Rica since that time.

Journal of Research of the U.S. Geological Survey↗
USGS1976

Geology of the Brysch uranium mine, Karnes County, Texas

Approximately 13,700 tons (12,400 tonnes) of oxidized uranium ore, averaging about 0.1 percent U 2 O 8 , was mined during 1966 and 1967 from the lower unit of the Deweesville Sandstone Member of the upper Eocene Whitsett Formation, from depths of 75 to 90 feet (23-27 m). The mine is in the Karnes County uranium area, 3 miles (5 km) east of Falls City, Tex. Meta-autunite, Ca(UO 2 ) 2 (PO 4 ) 2 2-6H 2 O, and meta-tyuyamunite, Ca(UO 2 ) 2 (PO 4 ) 2 3-5H 2 O, were identified in samples of the ore. The host rock is light-colored, medium-grained, well-sorted feldspathic sandstone that contains fossil wood and Ophiomorpha . It also contains clinoptilolite, cristobalite, and montmorillonite that probably formed as alteration products of volcanic grains in the original sediment. The host rock was deposited in a beach environment near or on a delta formed at the mouth of a stream channel oriented roughly normal to the beach. The Deweesville can be traced for many miles on the surface and represents in general the point of maximum transgression in a transgressive-regressive cycle. The upper unit of the Deweesville, which overlies the host rock, is now exposed in the mine and contains, in ascending order, storm-beach, shoreface, beach, and tidal-flat facies. The shape of the ore body suggests that it originated as an unoxidized ore roll. The ore-bearing fluids may have entered through porous fluvial rock extending updip. Plant material, abundant in the original host sediment, probably supplied reductant necessary for the roll formation.

Texas↗
USGS1978

Uranium in waters and aquifer rocks at the Nevada Test Site, Nye County, Nevada

Previous chemical, geological, and hydrological information describing the physical and chemical environment of the Nevada Test Site (a Federal reserve for the testing of nuclear explosive devices) has been combined with new radiochemical and isotope data for water and rock samples in order to explain the behavior of uranium during alteration of thick sequences of rhyolitic volcanic rocks and associated volcaniclastic sediments. A model is proposed in which uranium mobility is controlled by two competing processes. Uranium is liberated from the volcanic rocks through dissolution of the glassy constituents and is carried in solution as a uranyl carbonate complex. Uranium is subsequently removed from solution by adsorption on secondary oxides of iron, titanium, and manganese, as observed in fission-track maps of aquifer rocks. The model explains the poor correlation of dissolved uranium with depth within tuffaceous sequences in which percolation of ground water is predominantly downward. Good positive correlation of dissolved uranium with dissolved Na, total dissolved solids, and total carbonate supports the glass dissolution model, while inverse correlation of dissolved uranium with U 234 /U 238 ratios of waters implies uranium is being absorbed by a relatively insoluble, surficial phase. Alpha radioactivity of Test Site water is primarily caused by high U 234 contents, and beta activity is highly correlated with dissolved K (K 40 ). Small amounts of dissolved radium, Pb 210 , and Po 210 are present but no evidence was found for alpha activity sources related to nuclear testing (Pu, U 235 ). A filtered but unacidified carbonate solution of uranium was found to be stable (± 10 percent of original U concentration) for years when stored in acid-washed polyethylene bottles.

Nevada↗
USGS1963

Applications of geohydrologic concepts in geology

Subsurface water, an active agent in many geologic proceses, must be considered in interpreting geologic phenomena. Principles of the occurrence, distribution, and movement of subsurface waters are well established and readily applicable. In many interpretations in geologic literature, geohydrologic principles have been employed realistically, but in many others these principles have been either ignored or violated. Explanations of genesis of underclays and associated deposits afford some examples wherein principles of movement and activity of vadose and ground water have been ignored and others in which they have been used advantageously. Postulates stating that waters percolate downward from swamp areas do not allow for the usual movement of subsurface water in such environments. The idea that sediments were leached by vadose water after uplift satisfies the geohydrologic requirements. Weathering and solution form porous and permeable zones subjacent to unconformities in dense rocks such as carbonates and granites; this illustrates the geohydrologic and economic significance of unconformities. Examples are Mohawkian carbonate aquifers of northern Illinois and oil-bearing limestones of Mississippian age of eastern Montana. The flushing effects of meteoric water and other hydrodynamic factors active during erosion periods are important elements in the genesis and concentration of brines. Explanation of the origin and occurrence of brines must include consideration of the geohydrologic environments throughout their geologic history.

Journal of Hydrology↗
USGS1973

Stress changes ahead of an advancing tunnel

Instrumentation placed ahead of three model tunnels in the laboratory and ahead of a crosscut driven in a metamorphic rock mass detected stress changes several tunnel diameters ahead of the tunnel face. Stress changes were detected 4 diameters ahead of a model tunnel drilled into nearly elastic acrylic, 2·50 diameters ahead of a model tunnel drilled into concrete, and 2 diameters ahead of a model tunnel drilled into Silver Plume Granite. Stress changes were detected 7·50 diameters ahead of a crosscut driven in jointed, closely foliated gneisses and gneissic granites in an experimental mine at Idaho Springs, Colorado. These results contrast markedly with a theoretical elastic estimate of the onset of detectable stress changes at 1 tunnel diameter ahead of the tunnel face. A small compressive stress concentration was detected 2 diameters ahead of the model tunnel in acrylic, 1.25 diameters ahead of the model tunnel in concrete, and 1 diameter ahead of the model tunnel in granite. A similar stress peak was detected about 6 diameters ahead of the crosscut. No such stress peak is predicted from elastic theory. The 3-dimensional in situ stress determined in the field demonstrate that geologic structure controls stress orientations in the metamorphic rock mass. Two of the computed principal stresses are parallel to the foliation and the other principal stress is normal to it. The principal stress orientations vary approximately as the foliation attitude varies. The average horizontal stress components and the average vertical stress component are three times and twice as large, respectively, as those predicted from the overburden load. An understanding of the measured stress field appears to require the application of either tectonic or residual stress components, or both. Laboratory studies indicate the presence of proportionately large residual stresses. Mining may have triggered the release of strain energy, which is controlled by geologic structure.

Colorado↗
USGS2012

Morphometric variability within the axial zone of the southern Juan de Fuca Ridge: Interpretation from Sea MARC II, Sea MARC I, and deep-sea photography

The morphometric characteristics of the axial regions of oceanic spreading centers are determined by (1) the type of volcanic flows, (2) the relation between primary volcanic relief (on a scale of a few meters to tens of meters) and degree of sediment cover, and (3) the extent of surficial expression and timing of tectonic disruption of the young oceanic crust. Even within a single, continuous, linear spreading-ridge segment with relatively uniform axial valley dimensions over a distance of 50 or more kilometers, such as along the southern Juan de Fuca Ridge, the changes in morphometric characteristics along axis within the youngest crust indicate distinct variation in tectonic and volcanic activity over short distances within short time periods. An integrated analysis of Sea MARC I, Sea MARC II, and photographic data for the southernmost continuous segment of the Juan de Fuca Ridge shows that generalizations about tectonic and volcanic processes at spreading ridges must consider both the temporal scale of processes as well as the physical scales of observations if predictive models are to be successful. Comparison of the morphometric expression within the major hydrothermal vent area and the rest of the southernmost ridge segment suggests that the mapped distribution of hydrothermal vents may reflect the extent of survey effort rather than uniqueness of geologic setting.

Journal of Geophysical Research B: Solid Earth↗
USGS2000

Post-early cretaceous landform evolution along the western margin of the Bancannia trough, western NSW

Previously undated post-Devonian sediments outcropping north of Fowlers Gap station near the western margin of the Bancannia Trough are shown by plant macro- and microfossil determinations to be of Early Cretaceous (most likely Neocomian and/or Aptian) age, and thus part of the Eromanga Basin. They are assigned to the previously defined Teleplione Creek Formation. Study of the structural configuration of this unit and the unconformably underlying Devonian rocks suggests that the gross landscape architecture of the area results from post-Early Cretaceous monoclinal folding along blind faults at the western margin of the trough, combined with the effects of differential erosion. This study shows that. while landscape evolution in the area has been dynamic, the major changes that have occurred are on a geological rather than human timescale.

New South Wales↗
USGS2008

Anatomy and dynamics of a floodplain, Powder River, Montana, U.S.A.

Centimeter-scale measurements on several Powder River floodplains provide insights into the nature of overbank depositional processes that created the floodplains; during a 20-year period after a major flood in 1978. Rising stages initially entered across a sill at the downriver end of the floodplains. Later, as stages continued to rise, water entered the floodplains through distinct low saddles along natural levees. The annual maximum depth of water over the levee crest averaged 0.19 in from 1983 through 1996, and the estimated flow velocities were approximately 0.15 m s-1. Water ponded in the floodplain trough, a topographic low between the natural levee and the pre-flood riverbank, and mud settled as thin layers of nearly constant thickness. Mud layers alternated with sand layers, which were relatively thick near the channel. Together, these beds created a distinctive natural levee. In some locations, individual flood deposits began as a thin mud layer that gradually coarsened upwards to medium-grained sand. Coarsening-upwards sequences form initially as mud because only the uppermost layers of water in the channel supply the first overbank flows, which are rich in mud but starved of sand. At successively higher stages, fine sands and then medium sands increase in concentration in the floodwater and are deposited as fine- and medium-sand layers overlying the initial mud layer. Theoretical predictions from mathematical models of sediment transport by advection and diffusion indicate that these processes acting alone are unlikely to create the observed sand layers of nearly uniform thickness that extend across much of the floodplain. We infer that other transport processes, notably bedload transport, must be important along Powder River. Even with the centimeter-scale measurements of floodplain deposits, daily hydraulic data, and precise annual surface topographic surveys, we were unable to determine any clear correspondence between the gauged flow record of overbank floods and the depositional layers mapped in the floodplain. These results provide a detailed example of floodplain deposits and depositional processes that should prove useful for interpreting natural levee deposits in a variety of geologic settings. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗
USGS1975

Lithium in sediments and brines--how, why and where to search

The possibility of using lithium in batteries to power electric vehicles and as fuel for thermonuclear power has focused attention on the limited resources of lithium other than in pegmatite minerals. The Clayton Valley, Nev., subsurface lithium brine has been the major source of lithium carbonate since about 1967, but the life of this brine field is probably limited to several more decades at the present rate of production. Lithium is so highly soluble during weathering and in sedimentary environments that no lithium-rich sedimentary minerals other than clays have been identified to date. The known deposits of lithium, such as the clay mineral hectorite and the lithium-rich brines, occur in closed desert basins of the Southwest in association with nonmarine evaporites. However, the ultimate source for the lithium in these deposits may be from hydrothermal solutions. The search for previously unreported deposits of nonpegmatitic lithium should consider its probable association, not only with nonmarine evaporite minerals, but also with recent volcanic and tectonic activity, as well as with deposits of boron, beryllium, fluorine, manganese, and possibly phosphate.

Journal of Research of the U.S. Geological Survey↗
USGS1974

Analyses and economic potential of monazite in Liberia

Eleven monazite samples from Liberia, including seven from beach sands, were analyzed by the X-ray fluorescence method. The monazite samples, containing only one-half percent impurities, were obtained by use of a hot Clerici-solution procedure for purification which was devised by the author. The percentage of the rare-earth elements in Liberian monazite concentrates does not differ greatly from that of monazite sands elsewhere in the world. The average of the 11 samples shows less praseodymium and neodymium than Russian and American monazites, but more cerium. Liberian coastal sands apparently contain sufficient reserves of monazite (and other heavy minerals of commerce) to encourage mining. A feasibility study of production and marketing of monazite from Liberian beach sands is recommended.

Journal of Research of the U.S. Geological Survey↗
USGS1976

Textural distribution of sea-floor sediments, south Texas Outer Continental Shelf

The general texture of sea-floor sediments along the south Texas Outer Continental Shelf was evaluated in terms of gravel, sand, silt, and clay components. The gravel component is quantitatively minor and is concentrated mainly in the southern sector; it consists, for the most part, of relict biogenic detritus dominated by molluscan shells. The sand component consists of terrigenous and biogenic detritus. Modern sand is localized along the shoreface sector, whereas palimpsest and relict sands characterize the northern and southern sectors, which are the respective locations of the ancestral Brazos-Colorado 'and Rio Grande deltas. The central sector contains an extensive modern mud blanket that appears to be migrating southward over relict deposits of the ancestral Rio Grande delta. The silt fraction is the highly dominant component of the mud blanket; silt appears to be hydraulically trapped within the shelf environment and constitutes the most abundant detrital component within the Outer Continental Shelf region. The subordinate clay component of the mud blanket is concentrated toward the shelf break and may be largely escaping into deeper water environments.

Texas↗
USGS1975

A model for earthquakes near Palisades Reservoir, southeast Idaho

The Palisades Reservoir seems to be triggering earthquakes: epicenters are concentrated near the reservoir, and quakes are concentrated in spring, when the reservoir level is highest or is rising most rapidly, and in fall, when the level is lowest. Both spring and fall quakes appear to be triggered by minor local stresses superposed on regional tectonic stresses; faulting is postulated to occur when the effective normal stress across a fault is decreased by a local increase in pore-fluid pressure. The spring quakes tend to occur when the reservoir level suddenly rises: increased pore pressure pushes apart the walls of the graben flooded by the reservoir, thus decreasing the effective normal stress across faults in the graben. The fall quakes tend to occur when the reservoir level is lowest: water that gradually infiltrated poorly permeable (fault-gouge?) zones during high reservoir stands is then under anomalously high pressure, which decreases the effective normal stress across faults in the poorly permeable zones.

Idaho↗
USGS1976

A portable helium sniffer

A portable helium sniffer has been developed for field use. The instrument is mounted in a four-wheel-drive pickup truck and can detect 50 parts per billion of helium in soil gas. The usefulness of helium sniffing in soil is being investigated as a prospecting tool in gas, oil, uranium, and geothermal prospecting as well as in earthquake prediction.

Journal of Research of the U.S. Geological Survey↗
USGS1976

Rise of a variable-viscosity fluid in a steadily spreading wedge-shaped conduit with accreting walls

Relatively rigid plates making up the outer 50 to 100 km of the Earth are steadily separating from one another along narrow globe-circling zones of submarine volcanism, the oceanic spreading centers. Continuity requires that the viscous underlying material rise beneath spreading centers and accrete onto the steadily diverging plates. It is likely that during the rise the viscosity changes systematically and that the viscous tractions exerted on the plates contribute to the unique pattern of submarine mountains and earthquake faults observed at spreading centers. The process is modeled by viscous creep in a wedge-shaped conduit (with apex at the sea floor) in which the viscosity varies as r m where r is distance from the apex and m is a parameter. For these conditions, the governing differential equations take a simple form. The solution for the velocity is independent of r and of the sign of m . As viscous stresses vary as r m-1 , the pattern of stress on the conduit wall is sensitive to viscosity variation. For negative m , the viscous pressure along the base of the conduit is quite uniform; for positive m , it falls toward zero in the axial region as the conduit base widens. For small opening angles, viscous forces push the plates apart, and for large ones, they oppose plate separation. Though highly idealized, the solution provides a tool for investigating tectonic processes at spreading centers.

Journal of Research of the U.S. Geological Survey↗