Search USGS⌕ Search

SEARCH · Search USGS

Results for “Studies in Maine Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources
USGS1998

Analysis of simulated advanced spaceborne thermal emission and reflection (ASTER) radiometer data of the Iron Hill, Colorado, study area for mapping lithologies

The advanced spaceborne thermal emission and reflection (ASTER) radiometer was designed to record reflected energy in nine channels with 15 or 30 m resolution, including stereoscopic images, and emitted energy in five channels with 90 m resolution from the NASA Earth Observing System AMI platform. A simulated ASTER data set was produced for the Iron Hill, Colorado, study area by resampling calibrated, registered airborne visible/infrared imaging spectrometer (AVIRIS) data, and thermal infrared multispectral scanner (TIMS) data to the appropriate spatial and spectral parameters. A digital elevation model was obtained to simulate ASTER-derived topographic data. The main lithologic units in the area are granitic rocks and felsite into which a carbonatite stock and associated alkalic igneous rocks were intruded; these rocks are locally covered by Jurassic sandstone, Tertiary rhyolitic tuff, and colluvial deposits. Several methods were evaluated for mapping the main lithologic units, including the unsupervised classification and spectral curve-matching techniques. In the five thermalinfrared (TIR) channels, comparison of the results of linear spectral unmixing and unsupervised classification with published geologic maps showed that the main lithologic units were mapped, but large areas with moderate to dense tree cover were not mapped in the TIR data. Compared to TIMS data, simulated ASTER data permitted slightly less discrimination in the mafic alkalic rock series, and carbonatite was not mapped in the TIMS nor in the simulated ASTER TIR data. In the nine visible and near-infrared channels, unsupervised classification did not yield useful results, but both the spectral linear unmixing and the matched filter techniques produced useful results, including mapping calcitic and dolomitic carbonatite exposures, travertine in hot spring deposits, kaolinite in argillized sandstone and tuff, and muscovite in sericitized granite and felsite, as well as commonly occurring illite/muscovite. However, the distinction made in AVIRIS data between calcite and dolomite was not consistently feasible in the simulated ASTER data. Comparison of the lithologie information produced by spectral analysis of the simulated ASTER data to a photogeologic interpretation of a simulated ASTER color image illustrates the high potential of spectral analysis of ASTER data to geologic interpretation.

Journal of Geophysical Research D: Atmospheres↗
USGS2015

Standard operating procedures for collection of soil and sediment samples for the Sediment-bound Contaminant Resiliency and Response (SCoRR) strategy pilot study

An understanding of the effects on human and ecological health brought by major coastal storms or flooding events is typically limited because of a lack of regionally consistent baseline and trends data in locations proximal to potential contaminant sources and mitigation activities, sensitive ecosystems, and recreational facilities where exposures are probable. In an attempt to close this gap, the U.S. Geological Survey (USGS) has implemented the Sediment-bound Contaminant Resiliency and Response (SCoRR) strategy pilot study to collect regional sediment-quality data prior to and in response to future coastal storms. The standard operating procedure (SOP) detailed in this document serves as the sample-collection protocol for the SCoRR strategy by providing step-by-step instructions for site preparation, sample collection and processing, and shipping of soil and surficial sediment (for example, bed sediment, marsh sediment, or beach material). The objectives of the SCoRR strategy pilot study are (1) to create a baseline of soil-, sand-, marsh sediment-, and bed-sediment-quality data from sites located in the coastal counties from Maine to Virginia based on their potential risk of being contaminated in the event of a major coastal storm or flooding (defined as Resiliency mode); and (2) respond to major coastal storms and flooding by reoccupying select baseline sites and sampling within days of the event (defined as Response mode). For both modes, samples are collected in a consistent manner to minimize bias and maximize quality control by ensuring that all sampling personnel across the region collect, document, and process soil and sediment samples following the procedures outlined in this SOP. Samples are analyzed using four USGS-developed screening methods—inorganic geochemistry, organic geochemistry, pathogens, and biological assays—which are also outlined in this SOP. Because the SCoRR strategy employs a multi-metric approach for sample analyses, this protocol expands upon and reconciles differences in the sample collection protocols outlined in the USGS “National Field Manual for the Collection of Water-Quality Data,” which should be used in conjunction with this SOP. A new data entry and sample tracking system also is presented to ensure all relevant data and metadata are gathered at the sample locations and in the laboratories.

Open-File Report↗
USGS1980

Lateral trends and vertical sequences in estuarine sediments, Willapa Bay, Washington

Willapa Bay is a sizable estuary on the southern coast of Washington- Relatively unmodified in a geologic sense by human activity the bay provides an excellent example of modern depositional facies in an estuarine setting. Studies of these deposits indicate that consistent lateral trends exist in sediment texture and sedimentary structures. The texture changes from sandy at the mouth of the bay to muddy in its upper parts. In any part of the bay , sediment is coarsest in the channel bottoms, where lag deposits accumulate. The sediment tends to fine in an upslope direction and is finest in supratidal flat deposits of silt and clay. The nature of sedimentary structures depends on the combination of physical and biological processes and sediment textures. Bedforms exist wherever the bed is sandy. In the main tidal channels sandwaves and dunes up to 4 meters high occur. In tributary channels and at the margins of the main channel, at shallower depths and under less intense currents , the structures are generally less than a meter high. Current ripples occur in t he sandy bed of all of the tidal channels and in runoff channels cross the tidal flat. Symmetric long-crested ripples are produced by wave action over the sandy intertidal flat. Internal structures in the bay's sediment depend not only on the nature of the bedform but also on the rate of bioturbation relative to physical processes. Under fields of large sandwaves or dunes, medium- to large-scale tabular and trough crossbedding predominates. This crossbedding generally is unidirectional, reflecting the locally dominant current (ebb or flood). Ripple bedding predominates elsewhere in sandy sediment within the channels. Where sand transport is diminished, as on the floor of the upper tributary channels, bioturbation exceeds the rate of production of physical structures and bedding is destroyed. The depositional banks in such areas tend to be sites of rapid sediment accumulation and bedding in the form of interlayered sand (commonly ripple bedded) and mud persists. On intertidal flats the sediment accumulates slowly and bioturbation erases nearly all physical structures. Bedding is preserved only where deposition is locally rapid , as in topographic depressions or on the depositional banks of runoff channels, or where faunal activity is inhibited, as beneath mounds of blue-green algae. The rate of sedimentation is slower still on the supratidal flats, but the general paucity of faunal activity allows the preservation of thin alternations of fine sand , silt or clay. The lateral migration of the tidal channels produces vertical sequences in which topographically higher facies are superposed on one another. Near the mouth of the estuary the upward sequence: lag deposit — crossbedded sand — ripple or planar-bedded sand is typical. The crossbedding shows a general upward decrease in thickness and a progression from trough to tabular units. In the main tidal channel - in the central estuary and in sandy tributary channels, the typical vertical sequence resembles that near the mouth , with the exception that the sequence is capped by bioturbated sandy or muddy tide flat deposits. In the upper estuary , where muddy sediment predominates, a typical sequence shows the progression-. bioturbated lag deposit — gently dipping interlaminated sand and mud layers of the accretionary bank — bioturbated mud flat deposits — thinly laminated fine supratidal deposits.

Oregon, Washington↗
USGS2005

Candidate-penetrative-fracture mapping of the Grand Canyon area, Arizona, from spatial correlation of deep geophysical features and surficial lineaments

Some aquifers of the southwestern Colorado Plateaus Province are deeply buried and overlain by several impermeable shale layers, and so recharge to the aquifer probably is mainly by seepage down penetrative-fracture systems. The purpose of this 2-year study, sponsored by the U.S. National Park Service, was to map candidate deep penetrative fractures over a 120,000-km2 area, using gravity and aeromagnetic-anomaly data together with surficial-fracture data. The study area was on the Colorado Plateau south of the Grand Canyon and west of Black Mesa; mapping was carried out at a scale of 1:250,000. The resulting database constitutes a spatially registered estimate of deep-fracture locations. Candidate penetrative fractures were located by spatial correlation of horizontal- gradient and analytic-signal maximums of gravity and magnetic anomalies with major surficial lineaments obtained from geologic, topographic, side-looking-airborne-radar, and satellite imagery. The maps define a subset of candidate penetrative fractures because of limitations in the data coverage and the analytical technique. In particular, the data and analytical technique used cannot predict whether the fractures are open or closed. Correlations were carried out by using image-processing software, such that every pixel on the resulting images was coded to uniquely identify which datasets are correlated. The technique correctly identified known and many new deep fracture systems. The resulting penetrative-fracture-distribution maps constitute an objectively obtained, repeatable dataset and a benchmark from which additional studies can begin. The maps also define in detail the tectonic fabrics of the southwestern Colorado Plateaus Province. Overlaying the correlated lineaments on the normalized-density-of-vegetation-index image reveals that many of these lineaments correlate with the boundaries of vegetation zones in drainages and canyons and so may be controlling near-surface water availability in some places. Many derivative products can be produced from the database, such as fracture-density-estimate maps, and maps with the number of correlations color-coded to estimate the possible quality of correlation. The database contained in this report is designed to be used in a geographic information system and image-processing systems, and most data layers are in georeferenced tagged image format (Geotiff) or ARC grids. The report includes 163 map plates and various metadata, supporting, and statistical diagram files.

Data Series↗
USGS2004

Simulation of ground-water flow in the Cedar River alluvial aquifer flow system, Cedar Rapids, Iowa

The Cedar River alluvial aquifer is the primary source of municipal water in the Cedar Rapids, Iowa, area. Since 1992, the U.S. Geological Survey, in cooperation with the City of Cedar Rapids, has investigated the hydrogeology and water quality of the Cedar River alluvial aquifer. This report describes a detailed analysis of the ground-water flow system in the alluvial aquifer, particularly near well field areas. The ground-water flow system in the Cedar Rapids area consists of two main components, the unconsolidated Quaternary deposits and the underlying carbonate bedrock that has a variable fracture density. Quaternary deposits consist of eolian sand, loess, alluvium, and glacial till. Devonian and Silurian bedrock aquifers overlie the Maquoketa Shale (Formation) of Ordovician age, a regional confining unit. Ground-water and surface-water data were collected during the study to better define the hydrogeology of the Cedar River alluvial aquifer and Devonian and Silurian aquifers. Stream stage and discharge, ground-water levels, and estimates of aquifer hydraulic properties were used to develop a conceptual ground-water flow model and to construct and calibrate a model of the flow system. This model was used to quantify the movement of water between the various components of the aluvial aquifer flow system and provide an improved understanding of the hydrology of the alluvial aquifer. Ground-water flow was simulated for the Cedar River alluvial aquifer and the Devonian and Silurian aquifers using the three-dimensional finite-difference ground-water flow model MODFLOW. The model was discretized into 223 rows and 354 columns of cells. Areal cell sizes range from about 50 feet on a side near the Cedar River and the Cedar Rapids municipal wells to 1,500 feet on a side near the model boundaries and farthest away from the Cedar Rapids municipal well fields. The model is separated into five layers to account for the various hydrogeologic units in the model area. Model results indicate that the primary sources of inflow to the modeled area are infiltration from the Cedar River (53.0 percent) and regional flow in the glacial and bedrock materials (34.1 percent). The primary sources of outflow from the modeled area are discharge to the Cedar River (45.4 percent) and pumpage (44.8 percent). Current steady-state pumping rates have increased the flow of water from the Cedar River to the alluvial aquifer by 43.8 cubic feet per second. Steady-state and transient hypothetical pumpage scenarios were used to show the relation between changes in pumpage and changes in infiltration of water from the Cedar River. Results indicate that more than 99 percent of the water discharging from municipal wells infiltrates from the Cedar River, that the time required for induced river recharge to equilibrate with municipal pumpage may be 150 days or more, and that ground-water availability in the Cedar Rapids area will not be significantly affected by doubling current pumpage as long as there is sufficient flow in the Cedar River to provide recharge.

Iowa↗
USGS2025

The influence of pre-existing structures on geothermal springs: Inferences from potential field mapping in Surprise Valley, CA and other sites In the northwestern Great Basin

Surprise Valley, located in the northwestern Great Basin, is an asymmetric extensional basin that marks a major tectonic transition between the relatively un-extended volcanic Modoc Plateau to the west, and the Basin and Range to the east that has undergone 10-15% extension. In addition, it sits just north of the Walker Lane which accommodates up to 20% of dextral slip associated with Pacific-North American plate interactions. Thermal springs issue from eight areas within Surprise Valley. Most of these occur within the basin and are not situated on the main basin forming range-front faults. As a result, efforts to resolve the structural setting of the valley’s hydrothermal system have relied on geophysics to characterize basin structure and geology. Extensive efforts to map the basin with ground and airborne magnetics have revealed a >35 km-long linear, intra-basin magnetic high, interpreted as a buried dike swarm. Geothermal springs on the eastern side of the valley, including Seifert hot springs, Leonards hot springs, and Surprise Valley hot springs (SVHS), are all situated along the magnetic high and occur at local breaks and bends in the anomaly, suggesting that fracture permeability is enhanced along the feature and particularly at these discontinuities. Recent studies, including drilling over the anomaly near SVHS that likely intersected dike material, as well as subsequent mapping and sampling of dikes outcropping along the anomaly on the playa surface south of SVHS, confirm (as previously inferred) that mafic intrusives are the principal source of the anomaly. Similar interpretations made in two other valleys (in southern Oregon and northwestern Nevada), where inferred intra-basin dikes appear to be spatially correlated with hot springs or prospective geothermal resource areas, suggest that the impact of pre-existing basement structure on hydrothermal activity may pertain more generally to other hydrothermal settings throughout the Great Basin. If so, efforts to map basement may enhance understanding structural controls on some geothermal systems. Furthermore, similarities across these disparate sites suggest that magmatism may play a much larger role in accommodating extension and influencing basin evolution across the western Great Basin than previously recognized.

Conference Paper↗
USGS2024

Groundwater hydrology, groundwater and surface-water interactions, aquifer testing, and groundwater-flow simulations for the Fountain Creek alluvial aquifer, near Colorado Springs, Colorado, 2018–20

From 2018 through 2020, the U.S. Geological Survey, in cooperation with the Air Force Civil Engineering Center, conducted an integrated study of the Fountain Creek alluvial aquifer located near Colorado Springs, Colorado. The objective of the study was to characterize hydrologic conditions for the alluvial aquifer pertinent to the potential for transport of solutes. Specific goals of this report were to characterize the groundwater hydrology of the area, to quantify groundwater and surface-water interactions, to estimate hydraulic properties of the aquifer using aquifer testing, and to complete numerical simulations of groundwater flow. Synoptic groundwater-level elevation measurements completed throughout this study, and as part of other U.S. Geological Survey programs between 1994 and 2020, indicate groundwater-level elevations fluctuate on annual and interannual timeframes. Groundwater-level fluctuations likely were caused by temporally variable groundwater recharge and discharge components in the area, with many wells showing maximum groundwater-level elevations during the winter months (November through March). From an interannual perspective, groundwater-level fluctuations appear to have reached maximum values during 2000 to 2003, decreased during 2003 to 2006, and remained relatively constant since that time, with the exception of several wells which have displayed rising groundwater-level elevations since 2018. Spatial evaluation of groundwater-level elevations indicates groundwater flow is generally from northeast to southwest within the vicinity of several alluvial paleochannels occurring along the northeastern margin of the aquifer. Within the center of the aquifer along Fountain Creek, groundwater flow is generally from north to south, approximately paralleling surface-water flow. To quantitatively understand the potential effect of groundwater recharge and groundwater pumping on fluctuations in groundwater-level elevation, a statistical transfer-function-noise model was applied. Results of the statistical model indicate throughout most of the aquifer, fluctuations were primarily the result of recharge seasonality. In the main stem of the aquifer where groundwater pumping wells were more concentrated, however, groundwater-level elevation fluctuations were also attributable to groundwater pumping through time. Three-dimensional evaluation of the aquifer geometry near Fountain Creek was combined with synoptic streamflow measurement and accounting of stream gains and losses to evaluate groundwater and surface-water interactions in the study area. Streamflow gain or loss calculations indicate Fountain Creek both gains from and loses flow to the alluvial aquifer, and gaining or losing reaches of the stream may be partially controlled by the depth to bedrock near the stream. Reaches with streamflow gains tend to coincide with areas where the estimated depth to bedrock is decreasing, meaning the alluvial aquifer is likely thinning in these areas and groundwater-flow paths may be converging and discharging groundwater to the stream. Losing reaches tended to coincide with locally greater depth to bedrock where the alluvial aquifer is likely thicker and has greater storage potential for surface water lost from Fountain Creek. Results of aquifer testing indicate hydraulic conductivity, estimated from slug tests and single-well pumping tests, ranged from 0.32 to 1,410 feet per day (ft/d) and 4.13 to 664 ft/d, respectively. These results are similar to the range of values from previous aquifer tests in the study area. Hydraulic conductivities from aquifer testing for this study were generally greater than the estimates of previous slug tests and had a mean value less than the estimates from previous pumping tests. Spatial evaluation of aquifer testing results indicates hydraulic conductivity tends to be greater in the main stem of the alluvial aquifer and lower in paleochannels upgradient from the main stem of the aquifer. The spatial variation in hydraulic conductivity may be attributed to the geomorphologic processes that formed the alluvial aquifer. Compacted sediment in the paleochannels has not been potentially transported sufficient distance to cause grain-size sorting, resulting in a poorly sorted deposit and lower hydraulic conductivities. In the central portion of the alluvial aquifer, near Fountain Creek, the sediments have been transported farther from their source areas and are likely better sorted, removing finer grained sediments that would cause lower hydraulic conductivity. A numerical groundwater-flow model was calibrated for the Fountain Creek alluvial aquifer for 2000–19 to simulate water-budget components, groundwater-flow directions, and groundwater-flow paths. The model simulated precipitation recharge, groundwater and surface-water interactions, evapotranspiration, high-volume groundwater pumping by pumping wells, and external inflows and outflows occurring along the boundaries of the alluvial aquifer. Model calibration was completed using manual and automated approaches, the latter of which assisted in quantifying model results sensitivity to input parameters. The calibrated model corresponds well with groundwater-level elevation observations, with a mean residual (observed minus simulated groundwater-level elevation) equal to −0.60 feet. Simulated groundwater base flow to streams was typically within 10 percent of base flow estimated by independent methods. Groundwater and surface-water interactions represented the largest water-budget components of the aquifer, with the second largest groundwater discharge component coming from pumping wells. Groundwater and surface-water interactions represent both the largest gain and loss terms in the water budget, because these interactions differ spatially, meaning in some areas of the model domain groundwater is being recharged by streams, whereas in other areas, groundwater is discharged to streams. Estimates of advective groundwater-flow paths indicate pumping wells may capture groundwater recharged from losing streams and groundwater that flows into the main stem of the alluvial aquifer from paleochannels.

Colorado↗
USGS1942

General geology and ground-water resources of the island of Maui, Hawaii

Maui, the second largest island in the Hawaiian group, is 48 miles long, 26 miles wide, and covers 728 square miles. The principal town is Wailuku. Sugar cane and pineapples are the principal crops. Water is used chiefly for irrigating cane. The purpose of the investigation was to study the geology and the ground-water resources of the island. Maui was built by two volcanoes. East Maui or Haleakala Volcano is 10,025 feet high and famous for its so-called crater, which is a section of Hawaii National Park. Evidence is given to show that it is the head of two amphitheater-headed valleys in which numerous secondary eruptions have occurred and that it is not a crater, caldera, or eroded caldera. West Maui is a deeply dissected volcano 5,788 feet high. The flat Isthmus connecting the two volcanoes was made by lavas from East Maui banking against the West Maui Mountains. Plate 1 shows the geology, wells, springs, and water-development tunnels. Plate 2 is a map and description of points of geologic interest along the main highways. Volcanic terms used in the report are briefly defined. A synopsis of the climate is included and a record of the annual rainfall at all stations is given also. Puu Kukui, on West Maui, has an average annual rainfall of 389 inches and it lies just six miles from Olowalu where only 2 inches of rain fell in 1928, the lowest ever recorded in the Hawaiian Islands. The second rainiest place in the Territory is Kuhiwa Gulch on East Maui where 523 inches fell during 1937. Rainfall averages 2,360 million gallons daily on East Maui and 580 on West Maui. Ground water at the point of use in months of low rainfall is worth about $120 per million gallons, which makes most undeveloped supplies valuable. The oldest rocks on East Maui are the very permeable primitive Honomanu basalts, which were extruded probably in Pliocene and early Pleistocene time from three rift zones. These rocks form a dome about 8,000 feet high and extend an unknown distance below sea level. Covering this dome are the Kula volcanics, extruded probably in early and middle Pleistocene time, and characterized by andesites, andesitic basalts, and picritic basalts. They are 2.000 feet thick on the summit and 50 to 200 feet thick at the periphery. They contain a sufficient number of interbedded soils, thin vitric tuff beds, and lava-filled valleys in their upper part to give rise to valuable perched springs in wet areas. The Kula lavas accumulated during a waning volcanic phase which was followed by a quiescence long enough for the erosion of deep amphitheater-headed valleys in the east or wet half of the mountain. Volcanic activity was renewed in middle (?) to late Pleistocene time and continued until Recent time, during which the Hana volcanic series was laid down. The last lava flow was erupted about 1750. The Hana lavas comprise andesitic, picritic, and olivine basalts. They veneered large areas of the east and south slopes, partly filled the deep amphitheater-headed valleys, and deeply buried the smaller valleys in the eastern half of the mountain. The Hana rocks are exceedingly permeable and much rain sinks into them. The oldest rocks on West Maui are the very permeable primitive Wailuku basalts, which were extruded probably in Pliocene and early Pleistocene time from two rifts and from many radial fissures. The basalts form a dome about 5,600 feet high and extend an unknown distance below sea level. Iao Valley is the eroded caldera of this dome. Forming an incomplete veneer over the dome are the Honolua soda trachytes and oligoclase andesites. They were extruded in late Pliocene (?) or early Pleistocene time, chiefly from bulbous domes. The clinker beds carry some water but the rocks are generally too dense to be good aquifers. During early (?) Pleistocene the West Maui volcano was cut by deep amphitheater-headed valleys and then all of Maui was deeply submerged. Four scattered eruptions occurred on West Maui in middle (?) and late Pleistocene time. The cones and lavas cover only small areas and are called the Lahaina volcanic series. The sedimentary rocks of both East and West Maui are chiefly late Quaternary and comprise fans, landslide debris, delta deposits, and valley fills, mostly of poorly permeable and poorly assorted bouldery alluvium. They are overlain on the Isthmus by extensive calcareous dunes of three ages. A mud flow more than 300 feet thick is exposed in Kaupo Valley. During the fluctuations of the ocean in the Pleistocene, the island was emerged and submerged several times. Calcareous fossiliferous marine conglomerates deposited during this period are found up to an altitude of 250 feet on West Maui. The Homomanu, Wailuku, and Kula lavas are the chief aquifers. They supply 28 irrigation wells which yield an average of 170 million gallons a day of basal water. These wells are mine-like shafts with infiltration tunnels and are called Maui-type wells. Well 16 yields 40,000,000 gallons daily with a 22-foot drawdown, which is the largest amount yielded by any well in the Hawaiian Islands. The largest spring (no. 26) on the island is artesian. It yields 10,400,000 gallons daily and issues from Kula lavas near Nahiku. West Maui has numerous perennial streams supplied by springs from a dike complex. Twenty-three tunnels in West Maui recover 20.5 million gallons a day of high-level water, mostly from this dike complex. East Maui has few perennial streams in proportion to its size, and they are chiefly small due to the water sheds being underlain with permeable lavas. Forty tunnels recover 6 million gallons a day of high-level water in East Maui and all from structures other than dikes. It is estimated that about 100 million gallons a day of basal water wastes into the sea from West Maui and about 700 million gallons a day from East Maui. A number of sites are described where wells could be sunk to recover this water. Sites are also described where tunnels could be driven to recover high-level supplies. The hydrology of East and West Maui is conspicuously different in many respects, mainly because of the difference in the stage of dissection, the extensive veneer of very permeable Hann lavas on East Maui, and the comparatively small area of the Lahaina lavas of similar age on West Maui. The only thermal water known in the Hawaiian Islands, except on the active volcano of Kilauea, is in a well in West Maui. The Nahiku area has been mapped and studied in detail. The upper part of the Honomanu volcanic series, exposed in the sea cliffs, in petrographic character is transitional into the overlying Kula lavas, Kula and Hana time were characterized by a long succession of valley-cutting episodes, each valley being filled by lava erupted from the east rift zone. The lavas include olivine basalts, picritic basalts, and basaltic andesites, In the Nahiku area basal ground water occurs largely in the Honomanu basalts. Perched water occurs in many of the later lavas, generally following the axes of buried valleys. The members which perch the water are mostly ashy soil beds, although an unusually extensive, thick layer of much decomposed clinker also appears to be a supporting member. Most of the water travels through the basal clinker members of aa lavas. Artesian water is encountered in the upper, transitional part of the Honomanu volcanic series. The aquifer is permeable porphyritic pahoehoe; the confining members are relatively impermeable nonporphyritic aa. The lavas of East Maui are described according to stratigraphic groups. The oldest or Honomanu lavas are olivine basalts like the primitive lavas in other Hawaiian volcanoes. The later or Kula and Hana lavas include basalts, basaltic andesites, andesites, and picritic basalts. The normative nepheline of analyzed East Maui lavas has not been identified in the mode. The degree of differentiation is inversely proportional to the frequency of eruptions. The lavas of West Maui volcano are divided into the Wailuku volcanic series, consisting largely of olivine basalts with less abundant olivine-poor basalts, hypersthene basalts, and picritic basalts; the Honolua volcanic series, consisting of oligoclase andesites and soda trachytes; and the Lahaina volcanic series, consisting of nepheline basanite and picritic basalts. Coarse-grained gabbros intrude the Wailuku lavas. Differentiation was undoubtedly partly by crystal settling, but the alkali curves of the variation diagram suggest that volatile transfer was of some importance.

Hawaii↗
USGS2012

Flow-adjusted trends in dissolved selenium load and concentration in the Gunnison and Colorado Rivers near Grand Junction, Colorado, water years 1986--2008

As a result of elevated selenium concentrations, many western Colorado rivers and streams are on the U.S. Environmental Protection Agency 2010 Colorado 303(d) list, including the main stem of the Colorado River from the Gunnison River confluence to the Utah border. Selenium is a trace metal that bioaccumulates in aquatic food chains and can cause reproductive failure, deformities, and other adverse impacts in birds and fish, including several threatened and endangered fish species. Salinity in the upper Colorado River has been the focus of source-control efforts for many years. Although salinity loads and concentrations have been previously characterized at the U.S. Geological Survey (USGS) streamflow-gaging stations at the Gunnison River near Grand Junction, Colo., and at the Colorado River near the Colorado-Utah State line, trends in selenium load and concentration at these two stations have not been studied. The USGS, in cooperation with the Bureau of Reclamation and the Colorado River Water Conservation District, evaluated dissolved selenium (herein referred to as "selenium") load and concentration trends at these two sites to inform decision makers on the status and trends of selenium. This report presents results of the evaluation of trends in selenium load and concentration for two USGS streamflow-gaging stations: the Gunnison River near Grand Junction, Colo. ("Gunnison River site"), USGS site 09152500, and the Colorado River near Colorado-Utah State line ("Colorado River site"), USGS site 09163500. Flow-adjusted selenium loads were estimated for the beginning water year (WY) of the study, 1986, and the ending WY of the study, 2008. The difference between flow-adjusted selenium loads for WY 1986 and WY 2008 was selected as the method of analysis because flow adjustment removes the natural variations in load caused by changes in mean-daily streamflow, emphasizing human-caused changes in selenium load and concentration. Overall changes in human-caused effects in selenium loads and concentrations during the period of study are of primary interest to the cooperators. Selenium loads for each of the 2 water years were calculated by using normalized mean-daily streamflow, measured selenium concentration, standard linear regression techniques, and data previously collected at the two study sites. Mean-daily streamflow was normalized for each site by averaging the daily streamflow for each day of the year over the 23-year period of record. Thus, for the beginning and ending water years, estimations could be made of loads that would have occurred without the effect of year-to-year streamflow variation. The loads thus calculated are illustrative of the change in loads between water years 1986 and 2008, and are not the actual loads that occurred in those 2 water years. The estimated 50th and 85th percentile selenium concentrations associated with the selenium loads were also calculated for WY 1986 and WY 2008 at each site. Time-trends in selenium concentration at the two sites were charted by using regression techniques for partial residuals for the entire study period (WY 1986 through WY 2008). Annual selenium load for the Gunnison River site was estimated to be 23,196 pounds for WY 1986 and 16,560 pounds for WY 2008, a 28.6 percent decrease. Lower and upper 95-percent confidence levels for WY 1986 annual load were 22,360 and 24,032 pounds. Lower and upper 95-percent confidence levels for WY 2008 annual load were 15,724 and 17,396 pounds. Estimated 50th percentile daily selenium concentrations decreased from 6.41 to 4.57 micrograms/liter from WY 1986 to WY 2008, whereas estimated 85th percentile daily selenium concentrations decreased from 7.21 to 5.13 micrograms/liter from WY 1986 to WY 2008. Annual selenium load for the Colorado River site was estimated to be 56,587 pounds for WY 1986 and 34,344 pounds for WY 2008, a 39.3 percent decrease. Lower and upper 95-percent confidence levels for WY 1986 annual load were 53,785 and 59,390 pounds. Lower and upper 95-percent confidence levels for WY 2008 annual load were 31,542 and 37,147 pounds. Estimated 50th percentile daily selenium concentrations decreased from 6.44 to 3.86 micrograms/liter from WY 1986 to WY 2008, whereas estimated 85th percentile daily selenium concentrations decreased from 7.94 to 4.72 micrograms/liter from WY 1986 to WY 2008.

Colorado↗
USGS2001

Ground-water levels and flow directions in glacial sediments and carbonate bedrock near Tremont City, Ohio, October-November 2000

Introduction During summer 2000, the U.S. Environmental Protection Agency (USEPA) began an investigation of the Tremont City Landfill Site near Tremont City, Ohio. The site is about 1 mile west of Tremont City, just south of the Clark-Champaign County line. The closed site consists of three main areas: an 8.5-acre barrel fill, a 14-acre waste-transfer area, and a 58-acre landfill. The local hydrogeology is complex, and multiple ground-water-flow directions at the site have been described; however, offsite ground-water levels and flow directions were poorly defined, because they were based on static water levels reported over many years by well drillers. In October 2000, the U.S. Geological Survey (USGS), in cooperation with the USEPA, measured water levels in residential and onsite monitoring wells to prepare a map of the potentiometric surface so that directions of regional ground-water flow could be better delineated in the vicinity of the site. The topography of the study area (extent of map) is characterized by a nearly level till plain with minor relief along incised streams draining east-southeast to the Mad River. The Tremont City Landfill Site is in an upland area between two east-southeast-trending streams. Storms Creek is about 1 mile north of the site. The southern extent of the landfill is within about 500 feet of Chapman creek. The surficial geology of the study area consists of unconsolidated glacial sediments that overlie Silurian-age Lockport Dolomite. These glacial sediments consist of fine-grained till interbedded with layers of silt, sands, and gravels. Sand and gravel layers are commonly found just above the bedrock surface. Onsite monitoring wells have been installed into several thin, permeable zones in the glacial sediments. Most residential wells in the area produce sufficient water for residential use (as much as 100 gallons per minute), from either sand and gravel layers in the glacial sediments or from the carbonate bedrock. The most productive aquifer in the area is the highly permeable glacial outwash in the buried bedrock valley beneath the Mad River. These outwash sands and gravels can yield more than 1,000 gallons per minute. If weathered, the Lockport Dolomite can be a productive source of water near the top of the unit.

Ohio↗
USGS1967

Geology and ground water of the Savannah River Plant and vicinity, South Carolina

The area described in this report covers approximately 2,600 square miles in west-central South Carolina and includes the site of the Savannah River Plant, a major production facility of the U.S. Atomic Energy Commission. The climate, surface drainage, and land forms of the study area are typical of the southern part of the Atlantic Coastal Plain. Precipitation is normally abundant and fairly evenly distributed throughout the year, and the mean annual temperature is moderately warm (64?F). The major streams that drain the area (the Savannah, Salkehatchie, and Edisto Rivers) have low gradients and flow in a southeasterly direction toward the Atlantic Ocean. Surface features of the area include narrow, flat-bottomed, steep-sided valleys and broad gently rolling interfluvial areas. Those parts of the Coastal Plain included within the report area can be subdivided into the Aiken Plateau, the Congaree Sandhills, and the Coastal Terraces. The area is underlain by a sequence of unconsolidated and partly consolidated sediments of Late Cretaceous, Tertiary, and Quaternary age. The unconsolidated sediments were deposited unconformably on a basement of igneous and metamorphic rocks of Precambrian and Paleozoic age and sedimentary rocks of Triassic age. The basement rocks are similar to the granite-diorite complex of the Charlotte Belt, the metamorphosed rocks of the Carolina Slate Belt, and the consolidated sediments of the Newark Group. The unconsolidated sediments strike about N. 60 ? E. and dip 6-20 feet per mile to the southeast. They form a wedge-shaped mass that increases in thickness toward the southeast to slightly more than 1,200 feet in the vicinity of Allendale, S.C., on the southeast or downdip side of the study area. The oldest or lowermost unconsolidated sedimentary unit, the Tuscaloosa Formation of Late Cretaceous age, is overlain in the subsurface by beds that are also probably Late Cretaceous in age and that herein are named the Ellenton Formation. The Upper Cretaceous deposits are, in turn, overlain by the, McBean Formation and the Congaree(?) Formation of middle Eocene age, the Barnwell Formation of late Eocene age, the Hawthorn Formation of early and middle Miocene age, and by fluvial and marine(?) terrace deposits of Pliocene(?), Pleistocene, and Recent age. In the mapped area, the Congaree(?) Formation includes undifferentiated rocks (mostly Congaree and Barnwell Formations and some Mcbean outliers). (See map explanation.) Structurally, the Upper Cretaceous sediments are overlapped to the northwest by Tertiary deposits. A preliminary geologic map of the general area is included in the report. The principal aquifer in the area is composed of the beds of medium to coarse sand and gravel contained in the Tuscaloosa and Ellenton Formations. Subordinate aquifers include deposits of sand and limestone of Tertiary and Quaternary age. The ground water in the principal aquifer occurs under water-table conditions in the outcrop area of the Tuscaloosa Formation in the northern and western parts of the study area, but it is under artesian pressure downdip in the southern and eastern parts of the study area. Contours drawn on the piezometric surface of the water in the principal aquifer indicate that water is recharged to the aquifer mainly by leakage through the overlying Tertiary formations. Likewise, the piezometric contours show that the outcrop area of the Tuscaloosa Formation functions chiefly as an area of discharge. Doubtless, water is also discharged from the aquifer by moving downdip to areas near the coast where the prevailing hydraulic gradient may favor the upward leakage of water through the upper confining beds. The hydraulic properties of the principal aquifer were determined by a series of pumping tests. The results indicate that the aquifer is highly productive and could supply 15 million gallons per day in the vicinity of the Savannah River Plant without exceeding the available drawdown.

South Carolina↗
USGS1978

Trend analysis of vegetation in Louisiana's Atchafalaya river basin

The purpose of the study was to determine vegetation succession trends; produce a current vegetation map of the basin; and to develop a mathematical model capable of predicting vegetation changes based on hydrologic factors. A statistical relationship of forests and hydrological variables with forest succession constraints predicted forest acreage totals for 16 forest categories within 70% or better of actual values in two-thirds of the cases. Using time-lapsed photography covering 42 years, 23 categories were described. The succession trend of vegetation since 1930, by sedimentation, had been toward mixed hardwoods, except for isolated areas. Satellite MSS Band 7 imagery was used to map the current vegetation into three main categories and for assessment of acreage. Additionally, a geological anomaly was recognized on satellite imagery indication an effect on drainage and sedimentation.

Louisiana↗
USGS2005

Using hydrogeomorphic criteria to classify wetlands on Mt. Desert Island, Maine – Approach, classification system, and examples

A wetland classification system was designed for Mt. Desert Island, Maine, to help categorize the large number of wetlands (over 1,200 mapped units) as an aid to understanding their hydrologic functions. The classification system, developed by the U.S. Geological Survey (USGS), in cooperation with the National Park Service, uses a modified hydrogeomorphic (HGM) approach, and assigns categories based on position in the landscape, soils and surficial geologic setting, and source of water. A dichotomous key was developed to determine a preliminary HGM classification of wetlands on the island. This key is designed for use with USGS topographic maps and 1:24,000 geographic information system (GIS) coverages as an aid to the classification, but may also be used with field data. Hydrologic data collected from a wetland monitoring study were used to determine whether the preliminary classification of individual wetlands using the HGM approach yielded classes that were consistent with actual hydroperiod data. Preliminary HGM classifications of the 20 wetlands in the monitoring study were consistent with the field hydroperiod data. The modified HGM classification approach appears robust, although the method apparently works somewhat better with undisturbed wetlands than with disturbed wetlands. This wetland classification system could be applied to other hydrogeologically similar areas of northern New England.

Maine↗
USGS2023

Hydrogeology and simulated groundwater availability in reaches 3 and 4 of the Washita River aquifer, southern Oklahoma, 1980–2017

The 1973 Oklahoma Groundwater Law (Oklahoma Statutes §82–1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s aquifers to determine the maximum annual yield for each groundwater basin. Because more than 20 years have elapsed since the final order was issued, the U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, conducted an updated hydrologic investigation and evaluated the effects of potential groundwater withdrawals on groundwater flow and availability in reaches 3 and 4 of the Washita River aquifer in southern Oklahoma for a study period spanning 1980–2017. A hydrogeologic framework and conceptual model were developed to guide the construction and calibration of a numerical model of the Washita River aquifer. The numerical model was calibrated to water-table-altitude observations at selected wells, base-flow observations at selected U.S. Geological Survey streamgages, and the conceptual-model recharge. Three types of groundwater-availability scenarios were run using the calibrated numerical model. These scenarios were used to (1) estimate equal-proportionate-share pumping rates, (2) quantify the potential effects of projected well withdrawals on groundwater storage over a 50-year period, and (3) simulate the potential effects of a hypothetical 10-year drought. With Washita River main-stem inflows, the 20-, 40-, and 50-year equal-proportionate-share pumping rates under normal recharge conditions were about 3.08 acre-feet per acre per year for reach 3 and about 3.80 acre-feet per acre per year for reach 4. Projected 50-year pumping scenarios were used to simulate the effects of modified well withdrawal rates. Because well withdrawals were less than 1 percent of the calibrated numerical-model water budget, changes to the well pumping rates had little effect on Washita River base flows and groundwater storage in the Washita River aquifer. A hypothetical 10-year drought scenario was used to simulate the potential effects of a prolonged period of reduced recharge on groundwater storage. Groundwater storage at the end of the drought period was 4.6 percent less than the groundwater storage of the calibrated numerical model at the end of the drought period.

Oklahoma↗
USGS2005

Sediment-hosted lead-zinc deposits: A global perspective

Sediment-hosted Pb-Zn deposits contain the world’s greatest lead and zinc resources and dominate worldproduction of these metals. They are a diverse group of ore deposits hosted by a wide variety of carbonate andsiliciclastic rocks that have no obvious genetic association with igneous activity. A range of ore-forming processes in a variety of geologic and tectonic environments created these deposits over at least two billion years of Earth history. The metals were precipitated by basinal brines in synsedimentary and early diagenetic to low-grade metamorphic environments. The deposits display a broad range of relationships to enclosing host rocks that includes stratiform, strata-bound, and discordant ores. These ores are divided into two broad subtypes: Mississippi Valley-type (MVT) and sedimentary exhalative (SEDEX). Despite the “exhalative” component inherent in the term “SEDEX,” in this manuscript, direct evidence of an exhalite in the ore or alteration component is not essential for a deposit to be classified as SEDEX. The presence of laminated sulfides parallel to bedding is assumed to be permissive evidence for exhalative ores. The distinction between some SEDEX and MVT deposits can be quite subjective because some SEDEX ores replaced carbonate, whereas some MVT deposits formed in an early diagenetic environment and display laminated ore textures. Geologic and resource information are presented for 248 deposits that provide a framework to describe and compare these deposits. Nine of the 10 largest sediment-hosted Pb-Zn deposits are SEDEX. Of the deposits that contain at least 2.5 million metric tons (Mt), there are 35 SEDEX (excluding Broken Hill-type) deposits and 15 MVT (excluding Irish-type) deposits. Despite the skewed distribution of the deposit size, the two deposits types have an excellent correlation between total tonnage and tonnage of contained metal (Pb + Zn), with a fairly consistent ratio of about 10/1, regardless of the size of the deposit or district. Zinc grades are approximately the same for both, whereas Pb and Ag grades are about 25 percent greater for SEDEX deposits. The largest difference between SEDEX and MVT deposits is their Cu content. Three times as many SEDEX deposits have reported Cu contents, and the median Cu value of SEDEX deposits is nearly double that of MVT deposits. Furthermore, grade-tonnage values for MVT deposits compared to a subset of SEDEX deposits hosted in carbonate rocks are virtually indistinguishable. The distribution of MVT deposits through geologic time shows that they are mainly a Phanerozoic phenomenon. The ages of SEDEX deposits are grouped into two major groups, one in the Proterozoic and another in the Phanerozoic. MVT deposits dominantly formed in platform carbonate sequences typically located within extensional zones inboard of orogenic belts, whereas SEDEX deposits formed in intracontinental or failed rifts, and rifted continental margins. The ages of MVT ores are generally tens of millions of years younger than their host rocks; however, a few are close (<~5 m.y.) to the age of their host rocks. In the absence of direct dates for SEDEX deposits, their age of formation is generally constrained by relationships to sedimentary or diagenetic features in the rocks. These studies suggest that deposition of SEDEX ores was coeval with sedimentation or early diagenesis, whereas some deposits formed at least 20 m.y. after sedimentation. Fluid inclusion, isotopic studies, and deposit modeling suggest that MVT and SEDEX deposits formed from basin brines with similar temperatures of mainly 90° to 200°C and 10 to 30 wt percent NaCl equiv. Lead isotope compositions for MVT and SEDEX deposits show that Pb was mainly derived from a variety of crustal sources. Lead isotope compositions do not provide criteria that distinguish MVT from SEDEX subtypes. However, sulfur isotope compositions for sphalerite and galena show an apparent difference. SEDEX and MVT sulfur isotope compositions extend over a large range; however, most data for SEDEX ores have mainly positive isotopic compositions from 0 to 20 per mil. Isotopic values for MVT ores extend over a wider range and include more data with negative isotopic values. Given that there are relatively small differences between the metal character of MVT and SEDEX deposits and the fluids that deposited them, perhaps the most significant difference between these deposits is their de-positional environment, which is determined by their respective tectonic settings. The contrasting tectonic setting also dictates the fundamental deposit attributes that generally set them apart, such as host-rock lithology, deposit morphology, and ore textures. Brief discussions are also presented on two controversial sets of deposits: Broken Hill-type deposits and a subset of deposits in the MVT group located in the Irish Midlands, considered by some authors to be a distinct ore type (Irish type). There are no significant differences in grade tonnage values between MVT deposits and the subset that is described as Irish type. Most features of the Irish deposits are not distinct from the family of MVT deposits; however, the age of mineralization that is the same as or close to the age of the host rocks and the anomalously high fluid inclusion temperatures (up to 250°C) stand out as distinctly different from typical MVT ores. The dominance of bacteriogenic sulfur in the Irish ores commonly ascribed as uniquely Irish type is in fact no different from several MVT deposits or districts. A comparison of SEDEX and Broken Hill-type deposits shows that the latter deposits contain significantly higher contents of Ag and Pb relative to SEDEX deposits. In terms of median values, Broken Hill-type deposits are almost three times more enriched in Ag and one and a half times more enriched in Pb compared to other SEDEX deposits. Metamorphism is a characteristic feature but not a prerequisite for inclusion in the Broken Hill-type category, and known Broken Hill-type examples appear to occur in Paleo- to Mesoprotero-zoic terranes. Broken Hill-type deposits remain an enigmatic grouping; however, there is sufficient evidence to support their inclusion as a separate category of SEDEX deposits.

Book chapter↗
USGS2022

Extensive species diversification and marked geographic phylogenetic structure in the Mesoamerican genus Stenopelmatus (Orthoptera: Stenopelmatidae: Stenopelmatinae) revealed by mitochondrial and nuclear 3RAD data

The Jerusalem cricket subfamily Stenopelmatinae is distributed from south-western Canada through the western half of the United States to as far south as Ecuador. Recently, the generic classification of this subfamily was updated to contain two genera, the western North American Ammopelmatus , and the Mexican, and central and northern South American Stenopelmatus . The taxonomy of the latter genus was also revised, with 5, 13 and 14 species being respectively validated, declared as nomen dubium and described as new. Despite this effort, the systematics of Stenopelmatus is still far from complete. Here, we generated sequences of the mitochondrial DNA barcoding locus and performed two distinct DNA sequence-based approaches to assess the species’ limits among several populations of Stenopelmatus , with emphasis on populations from central and south-east Mexico. We reconstructed the phylogenetic relationships among representative species of the main clades within the genus using nuclear 3RAD data and carried out a molecular clock analysis to investigate its biogeographic history. The two DNA sequence-based approaches consistently recovered 34 putative species, several of which are apparently undescribed. Our estimates of phylogeny confirmed the recent generic update of Stenopelmatinae and revealed a marked phylogeographic structure within Stenopelmatus . Based on our results, we propose the existence of four species-groups within the genus (the faulkneri , talpa , Central America and piceiventris species-groups). The geographic distribution of these species-groups and our molecular clock estimates are congruent with the geological processes that took place in mountain ranges along central and southern Mexico, particularly since the Neogene. Our study emphasises the necessity to continue performing more taxonomic and phylogenetic studies on Stenopelmatus to clarify its actual species richness and evolutionary history in Mesoamerica.

Invertebrate Systematics↗
USGS2007

Caribbean mangroves adjust to rising sea level through biotic controls on change in soil elevation

Aim The long-term stability of coastal ecosystems such as mangroves and salt marshes depends upon the maintenance of soil elevations within the intertidal habitat as sea level changes. We examined the rates and processes of peat formation by mangroves of the Caribbean Region to better understand biological controls on habitat stability. Location Mangrove-dominated islands on the Caribbean coasts of Belize, Honduras and Panama were selected as study sites. Methods Biological processes controlling mangrove peat formation were manipulated (in Belize) by the addition of nutrients (nitrogen or phosphorus) to Rhizophora mangle (red mangrove), and the effects on the dynamics of soil elevation were determined over a 3-year period using rod surface elevation tables (RSET) and marker horizons. Peat composition and geological accretion rates were determined at all sites using radiocarbon-dated cores. Results The addition of nutrients to mangroves caused significant changes in rates of mangrove root accumulation, which influenced both the rate and direction of change in elevation. Areas with low root input lost elevation and those with high rates gained elevation. These findings were consistent with peat analyses at multiple Caribbean sites showing that deposits (up to 10 m in depth) were composed primarily of mangrove root matter. Comparison of radiocarbon-dated cores at the study sites with a sea-level curve for the western Atlantic indicated a tight coupling between peat building in Caribbean mangroves and sea-level rise over the Holocene. Main conclusions Mangroves common to the Caribbean region have adjusted to changing sea level mainly through subsurface accumulation of refractory mangrove roots. Without root and other organic inputs, submergence of these tidal forests is inevitable due to peat decomposition, physical compaction and eustatic sea-level rise. These findings have relevance for predicting the effects of sea-level rise and biophysical processes on tropical mangrove ecosystems.

Caribbean Sea↗
USGS2011

Organic compounds assessed in Chattahoochee River water used for public supply near Atlanta, Georgia, 2004-05

An investigation by the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program characterized the occurrence of 266 organic compounds in source water and finished water from the Chattahoochee River, which is the main water-supply source for the Atlanta metropolitan area. Source water is stream water collected at a surface-water intake prior to water treatment, and finished water is water that has passed through treatment processes prior to distribution. Samples were collected approximately monthly during 2004-05 and included 15 paired source-water and finished-water samples. Samples were collected during winter-spring high flow and summer-fall low flow, but storm events were not targeted during this Source Water-Quality Assessment (SWQA) study. Samples were analyzed for pesticides and degradates, gasoline hydrocarbons, solvents, disinfection by-products, personal care and domestic-use products, and other organic compounds. Community water systems are required to monitor regulated organic compounds under the Safe Drinking Water Act of 1996 (U.S. Environmental Protection Agency, 1998); however, most compounds included in this study are not regulated by Federal drinking-water standards (U.S. Environmental Protection Agency, 2007a). The Chattahoochee River study is part of an ongoing NAWQA investigation of community water systems across the United States. Additional details about the national study are given in Carter and others (2007).

Georgia↗