SEARCH · Search USGS

Results for “Colorado Plateau”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources

USGS2011

Ecological influence and pathways of land use in sagebrush

Land use in sagebrush (Artemisia spp.) landscapes influences all sage-grouse (Centrocer-cus spp.) populations in western North America. Croplands and the network of irrigation canals cover 230,000 km2 and indirectly influence up to 77% of the Sage-Grouse Conservation Area and 73% of sagebrush land cover by subsidizing synanthropic predators on sage-grouse. Urbanization and the demands of human population growth have created an extensive network of con-necting infrastructure that is expanding its influence on sagebrush landscapes. Over 2,500 km 2 are now covered by interstate highways and paved roads; when secondary roads are included, 15% of the Sage-Grouse Conservation Area and 5% of existing sagebrush habitats are 2.5 km from roads. Density of secondary roads often exceeds 5 km/km 2 , resulting in widespread motorized access for recreation, creating extensive travel corridors for management actions and resource development, subsidizing predators adapted to human presence, and facilitating spread of exotic or invasive plants. Sagebrush lands also are being used for their wilderness and recreation values, including off highway vehicle use. Approximately 12,000,000 animal use months (AUM amount of forage to support one livestock unit per month) are permitted for grazing livestock on public lands in the western states. Direct effects of grazing on sage-grouse populations or sagebrush landscapes are not possible to assess from current data. However, management of lands grazed by livestock has influenced sagebrush ecosystems by vegetation treatments to increase forage and reduce sagebrush and other plant species unpalatable to livestock. Fences (2 km/km 2 in some regions), roads, and water developments to manage livestock movements further modify the landscape. Oil and gas development influences 8% of the sagebrush habitats with the highest intensities occurring in the eastern range of sage-grouse; 20% of the sagebrush distribution is indirectly influenced in the Great Plains, Wyoming Basin, and Colorado Plateau SMZs. Energy development physically removes habitat to construct well pads, roads, power lines, and pipelines; indirect effects include habitat fragmentation, soil disturbance, and facilitation of exotic plant and animal spread. More recent development of alternative energy, such as wind and geothermal, creates infrastructure in new regions of the sage-grouse distribution. Land use will continue to be a dominant stressor on sage-brush systems; its individual and cumulative effects will challenge long-term conservation of sage-grouse populations.

Book chapter↗

USGS1981

Plate-tectonic mechanism of Laramide deformation.

The Laramide compressive deformation of the craton was caused by a clockwise rotation of about 2-4o of the Colorado Plateau region relative to the continental interior, during late Late Cretaceous and early Tertiary time. Late Paleozoic and Neogene deformation of the craton also were produced by motion of a southwestern subplate relative to the continental interior. -from Author

Contributions to Geology - University of Wyoming, ↗

USGS1997

Geologic hazards in the region of the Hurricane fault

Complex geology and variable topography along the 250-kilometer-long Hurricane fault in northwestern Arizona and southwestern Utah combine to create natural conditions that can present a potential danger to life and property. Geologic hazards are of particular concern in southwestern Utah, where the St. George Basin and Interstate-15 corridor north to Cedar City are one of Utah's fastest growing areas. Lying directly west of the Hurricane fault and within the Basin and Range - Colorado Plateau transition zone, this region exhibits geologic characteristics of both physiographic provinces. Long, potentially active, normal-slip faults displace a generally continuous stratigraphic section of mostly east-dipping late Paleozoic to Cretaceous sedimentary rocks unconformably overlain by Tertiary to Holocene sedimentary and igneous rocks and unconsolidated basin-fill deposits. Geologic hazards (exclusive of earthquake hazards) of principal concern in the region include problem soil and rock, landslides, shallow ground water, and flooding. Geologic materials susceptible to volumetric change, collapse, and subsidence in southwestern Utah include; expansive soil and rock, collapse-prone soil, gypsum and gypsiferous soil, soluble carbonate rocks, and soil and rock subject to piping and other ground collapse. Expansive soil and rock are widespread throughout the region. The Petrified Forest Member of the Chinle Formation is especially prone to large volume changes with variations in moisture content. Collapse-prone soils are common in areas of Cedar City underlain by alluvial-fan material derived from the Moenkopi and Chinle Formations in the nearby Hurricane Cliffs. Gypsiferous soil and rock are subject to dissolution which can damage foundations and create sinkholes. The principal formations in the region affected by dissolution of carbonate are the Kaibab and Toroweap Formations; both formations have developed sinkholes where crossed by perennial streams. Soil piping is common in southwestern Utah where it has damaged roads, canal embankments, and water-retention structures. Several unexplained sinkholes near the town of Hurricane possibly are the result of collapse of subsurface volcanic features. Geologic formations associated with slope failures along or near the Hurricane fault include rocks of both Mesozoic and Tertiary age. Numerous landslides are present in these materials along the Hurricane Cliffs, and the Petrified Forest Member of the Chinle Formation is commonly associated with slope failures where it crops out in the St. George Basin. Steep slopes and numerous areas of exposed bedrock make rock fall a hazard in the St. George Basin. Debris flows and debris floods in narrow canyons and on alluvial fans often accompany intense summer cloudburst thunderstorms. Flooded basements and foundation problems associated with shallow ground water are common on benches north of the Santa Clara River in the city of Santa Clara. Stream flooding is the most frequently occurring and destructive geologic hazard in southwestern Utah. Since the 1850s, there have been three major riverine (regional) floods and more than 300 damaging flash floods. Although a variety of flood control measures have been implemented, continued rapid growth in the region is again increasing vulnerability to flood hazards. Site-specific studies to evaluate geologic hazards and identify hazard-reduction measures are recommended prior to construction to reduce the need for costly repair, maintenance, or replacement of improperly placed or protected facilities.

Brigham Young University Geology Studies↗

USGS2002

Salt deposits in Arizona promise gas-storage opportunities

Massive salt formations and their proximity to pipeline systems and power plants make Arizona attractive for natural gas storage. Caverns dissolved in subsurface salt are used to store LPG at Ferrellgas Partners LP facility near Holbrook and the AmeriGas Partners LP facility near Glendale. Three other companies are investigating the feasibility of storing natural gas in Arizona salt: Copper Eagle Gas Storage LLC, Desert Crossing Gas Storage and Transportation System LLC, and Aquila Inc. The most extensive salt deposits are in the Colorado Plateau Province. Marine and nonmarine salt deposits are present in Arizona.

Arizona↗

USGS2005

The Modular Modeling System (MMS): A toolbox for water- and environmental-resources management

The increasing complexity of water- and environmental-resource problems require modeling approaches that incorporate knowledge from a broad range of scientific and software disciplines. To address this need, the U.S. Geological Survey (USGS) has developed the Modular Modeling System (MMS). MMS is an integrated system of computer software for model development, integration, and application. Its modular design allows a high level of flexibility and adaptability to enable modelers to incorporate their own software into a rich array of built-in models and modeling tools. These include individual process models, tightly coupled models, loosely coupled models, and fully- integrated decision support systems. A geographic information system (GIS) interface, the USGS GIS Weasel, has been integrated with MMS to enable spatial delineation and characterization of basin and ecosystem features, and to provide objective parameter-estimation methods for models using available digital data. MMS provides optimization and sensitivity-analysis tools to analyze model parameters and evaluate the extent to which uncertainty in model parameters affects uncertainty in simulation results. MMS has been coupled with the Bureau of Reclamation object-oriented reservoir and river-system modeling framework, RiverWare, to develop models to evaluate and apply optimal resource-allocation and management strategies to complex, operational decisions on multipurpose reservoir systems and watersheds. This decision support system approach has been developed, tested, and implemented in the Gunnison, Yakima, San Joaquin, Rio Grande, and Truckee River basins of the western United States. MMS is currently being coupled with the U.S. Forest Service model SIMulating Patterns and Processes at Landscape Scales (SIMPPLLE) to assess the effects of alternative vegetation-management strategies on a variety of hydrological and ecological responses. Initial development and testing of the MMS-SIMPPLLE integration is being conducted on the Colorado Plateau region of the western United Sates.

Conference Paper↗

USGS2002

An overview of aggregate resources in the United States

In 2000 the USA produced about 2.7 billion tonnes of aggregate worth about $13.7 billion. Both crushed stone and sand and gravel are produced in virtually every State, although limited quantities are available in the Gulf Coastal Plain, the Colorado Plateau , the Wyoming Basin and the Great Plains. Prices vary depending on the product and location. Most aggregates are transported by road, and minor amounts by railroad, barge on navigable inland channels, and through the Great Lake ports. Imports and exports of aggregates are very minor. A major amount f crushed stone aggregates is consumed by concrete aggregate. Recycled aggregates account for about 8% of total demand, although the amount recycled is thought to be increasing. Current issues facing the inductry unclude the differences in quality specifications between States, adjusting to the increasing concern for the impact of aggregate mining on the environmentm, health issues from particulate matter and crystalline silica, and the complexity of obtaining permits for extraction. Redcustion in the number od companies extracting aggregrates is likely to occur through acquisitions.

Book chapter↗

USGS2010

Vegetation classification and distribution mapping report: Canyon de Chelly National Monument

Executive Summary: The classification and distribution mapping of the vegetation of Canyon de Chelly National Monument (CACH) and surrounding environment was accomplished through a multi-agency effort between 2003 and 2007. The National Park Service’s Southern Colorado Plateau Network facilitated the team that conducted the work, which comprised the U.S. Geological Survey’s Southwest Biological Science Center and Fort Collins Science Center, Navajo Natural Heritage Program, Northern Arizona University, and NatureServe. The project team described 48 plant communities for CACH—35 of which were described from quantitative classification based on field-relevé data collected in 2004. Five additional plant communities were based on field relevés collected in a previous study. The team derived four additional plant communities from field observations during the photointerpretation phase of the project, and field documented them during accuracy assessment. The National Vegetation Classification Standard served as a conceptual framework for assigning these plant communities to the alliance and association level. Ten of the 48 plant communities were designated “park specials”, that is, plant communities with insufficient data to describe them as new alliances or associations. The project team also developed a spatial vegetation map database representing CACH, with three different map-class schemas: base, group, and management map classes. The base map classes represented the finest level of spatial detail. Photointerpreters delineated initial polygons through manual interpretation of 2003/2004 1:12,000-scale true color aerial photography supplemented by occasional computer screen digitizing on a mosaic of digitized aerial photos. These polygons were labeled with base map classes during photointerpretation. Field visits verified interpretation concepts. The vegetation map database includes • ? 53 base map classes, which consist of associations and park specials classified with the quantitative analysis • ? additional associations noted during photointerpretation • ? non-vegetated land cover, such as infrastructure, land use, and geological land cover. The base map classes consist of 4,718 polygons in the project area. A field-based accuracy assessment of the base map classes showed the overall accuracy to be 50.8% The group map classes represent aggregations of the base map classes, approximating the group level of the National Vegetation Classification Standard, Version 2 (Federal Geographic Data Committee 2008). Terrestrial ecological systems, as described by NatureServe (Comer et al. 2003), were used as a first approximation of the group level. The project team identified 16 group map classes in this project. The overall accuracy of the group map classes was determined using the same accuracy assessment data as for the base map classes. The overall accuracy of the group representation of vegetation was 79.9%. In consultation with park staff, the team developed management map classes that consisted of park-defined groupings of base map classes and were intended to represent a balance between maintaining required accuracy and providing a focus on vegetation of particular interest or import to park managers. The 28 management map classes have an overall accuracy of 77.1%. While the main products of this project are the vegetation classification and the vegetation map database, a number of ancillary geographic information system and digital database products were also produced that can be used independently, or to augment the main products. These products include shapefiles of the location of field-collected data and relational databases of field-collected data.

Report↗

USGS2013

Invasive species in southern Nevada

Southern Nevada contains a wide range of topographies, elevations, and climactic zones emblematic of its position at the ecotone between the Mojave Desert, Great Basin, and Colorado Plateau ecoregions. These varied environmental conditions support a high degree of biological diversity (Chapter 1), but they also provide opportunities for a wide range of invasive species. In addition, the population center of the Las Vegas valley, and the agricultural area scattered throughout Clark, Lincoln, and Nye counties, all connected by a network of roads and highways, plus ephemeral and perennial watercourses, provide abundant opportunities for new invaders to be transported into and within southern Nevada (Brooks 2009; Brookes and Lair 2009). Invasive species are a concern for land managers because they can compete directly with native species (Brooks 2000; Chambers and others 2007; DeFlaco and others 2003, 2007; Mazzola and others 2010), change habitat conditions (Brooks and Esque 2002; Esque and others 2010; Miller and others 2011), and alter ecosystems properties (Brooks and Matchett 2006; Brooks and Pyke 2001; Evans and others 2001). Many invasive species have already established and spread to the point that they are now considered to pose significant problems in southern Nevada. However, there are likely many more than have wither not been transported to or colonized the region, or have established by for various reasons not spread or increased in abundance to the point where they have a significant impact. Land managers must understand both current and potential future problems posed by invasive species to appropriately prioritize management actions. This chapter addressed Sub-goal 1.2 in the SNAP Science Research Strategy (table 1.3; Turner and others 2009), which is to protect southern Nevada's ecosystems from the adverse impacts of invasive species. It provides a brief overview of the key concepts associated with the ecology and management of invasive species, and includes information relevant to all five strategic goals identified by the National Invasive Species Council: prevention, early detection and rapid response, control and management, restoration, and organization collaboration (National Invasive Species Council 2001, 2008). Restoration also is discussed in a broader context in Chapter 5 and 7. This chapter does not present a comprehensive review of all invasive species associated land management issues in southern Nevada, but rather uses key species of concern to illustrate invasion ecology concepts and management strategies. It is focused on terrestrial and aquatic plants and animals, and does not address potential invasive taxa from the other Kingdoms. The information presented herein is intended to provide a foundation upon which land management plans can be developed and project-level decisions can be made relative to the management of invasive species in southern Nevada.

Nevada↗

USGS2003

Lessons from the fires of 2000: Post-fire heterogeneity in ponderosa pine forests

We evaluate burn-severity patterns for six burns that occurred in the southern Rocky Mountains and the Colorado Plateau in 2000. We compare the results of two data sources: Burned Area Rehabilitations Teams (BAER) and a spatial burnseverity model derived from satellite imagery (the Normalized Burn Ratio; NBR). BAER maps tended to overestimate area of severe burns and underestimate area of moderate-severity burns relative to NBR maps. Low elevation and more southern ponderosa pine burns were predominantly understory burns, whereas burns at higher elevations and farther north had a greater component of high-severity burns. Thus, much, if not most, of the area covered by these burns appears to be consistent with historic burns and contributes to healthy functioning ecosystems.

Arizona, Colorado, New Mexico↗

USGS1973

Potassium, thorium, and uranium contents of upper Cenozoic basalts of the southern Rocky Mountain region, and their relation to the Rio Grande depression

Late Cenozoic basaltic volcanism in southern Colorado and northern New Mexico was most intense near the Rio Grande rift depression but extended onto stable platforms to the west (Colorado Plateau) and to the east (High Plains). Tholeiitic rocks are largely confined to the Rio Grande depression, and the basalts become increasingly alkalic with distance from the depression. The K, Th, and U contents and the Th/K and U/K ratios consistently increase away from the depression, and Th/U ratios also tend to increase slightly. Geographically distinct suites of petrographicaUy related basalts that are very similar in major-oxide compositions are readily distinguishable by K, Th, and U contents. Sialic crustal contamination did not contribute significantly to development of these compositional variations, and the lateral change from tholeiitic to alkalic basaltic volcanism may be related to different depths of or degrees of partial melting in the mantle. The compositions and compositional ranges of basalts in the southern Rocky Mountain region are similar to those of many Pacific islands, despite the contrasting geologic settings.

Colorado, New Mexico↗

USGS2011

Introduction

The National Coal Resource Assessment (NCRA) team of the U.S. Geological Survey (USGS) has assessed the quantity and quality of coal beds and zones that could be mined during the next 20 years or more. Geologic, geochemical, and resource information was collected and compiled for the five major coal-producing regions of the United States: the Appalachian Basin, Illinois Basin, Northern Rocky Mountains and Great Plains, Colorado Plateau, and the Gulf of Mexico Coastal Plain, (Gulf Coast) (Figure 1). In particular, the NCRA assessed coal-quality information and characterized environmentally significant trace elements, such as arsenic and mercury, that are defined in and administered by 1990 Clean Air Act Amendments (U.S. Environmental Protection Agency, 1990). The results of various USGS coal assessment efforts may be found at: http://energy.cr.usgs.gov/coal/coal_assessments/index.html, and a summary of the results from all assessment areas can be found in Ruppert et al. (2002) and Dennen (2009).

Louisiana, Texas↗

USGS2011

Executive summary - Geologic assessment of coal in the Gulf of Mexico coastal plain, U.S.A.

The National Coal Resource Assessment (NCRA) project of the U.S. Geological Survey (USGS) has assessed the quantity and quality of the nation's coal deposits that potentially could be mined during the next few decades. For eight years, geologic, geochemical, and resource information was collected and compiled for the five major coal-producing regions of the United States: the Appalachian Basin, Illinois Basin, Northern Rocky Mountains and Great Plains, Colorado Plateau, and the western part of the Gulf of Mexico Coastal Plain (Gulf Coast) region (Figure 1). In particular, the NCRA assessed resource estimates, compiled coal-quality information, and characterized environmentally sensitive trace elements, such as arsenic and mercury, that are mentioned in the 1990 Clean Air Act Amendments (U.S. Environmental Protection Agency, 1990). The results of the USGS coal assessment efforts may be found at: http://energy.cr.usgs.gov/coal/coal-assessments/index.html and a summary of the results from all assessment areas can be found in Ruppert et al. (2002) and Dennen (2009). Detailed assessments of the major coal-producing areas for the Gulf Coast region along with reviews of the stratigraphy, coal quality, resources, and coalbed methane potential of the Cretaceous, Paleocene, and Eocene coal deposits are presented in this report (Chapters 5-10).

Gulf of Mexico coastal plain↗

USGS2011

Front matter: Preface, acknowledgements, table of contents

This volume is the fifth in a series of reports by the U.S. Geological Survey (USGS) on the assessment of the quantity and quality of the nation’s coal deposits that potentially could be mined during the next few decades. For eight years (1995-2003), geologic, geochemical, and resource information was collected and compiled for the five major coal-producing regions of the United States: the Appalachian Basin, Illinois Basin, Northern Rocky Mountains and Great Plains, Colorado Plateau, and the western part of the Gulf of Mexico Coastal Plain (Gulf Coast) region. The results of these other USGS coal assessments may be found at: http://energy.cr.usgs.gov/coal/coal_assessments/ index.html and a summary of the results from all assessment areas can be found in Ruppert et al. (2002) and Dennen (2009). This volume contains the assessment results for the Gulf Coast region. The contents of this volume were compiled mainly during the eight-year period mentioned above. However, every effort has been made to update the references and text to incorporate new work that has been completed since the original compilation period.

AAPG Studies in Geology↗

USGS2009

Vegetation classification and distribution mapping report: Mesa Verde National Park

The classification and distribution mapping of the vegetation of Mesa Verde National Park (MEVE) and surrounding environment was achieved through a multi-agency effort between 2004 and 2007. The National Park Service’s Southern Colorado Plateau Network facilitated the team that conducted the work, which comprised the U.S. Geological Survey’s Southwest Biological Science Center, Fort Collins Research Center, and Rocky Mountain Geographic Science Center; Northern Arizona University; Prescott College; and NatureServe. The project team described 47 plant communities for MEVE, 34 of which were described from quantitative classification based on f eld-relevé data collected in 1993 and 2004. The team derived 13 additional plant communities from field observations during the photointerpretation phase of the project. The National Vegetation Classification Standard served as a framework for classifying these plant communities to the alliance and association level. Eleven of the 47 plant communities were classified as “park specials;” that is, plant communities with insufficient data to describe them as new alliances or associations. The project team also developed a spatial vegetation map database representing MEVE, with three different map-class schemas: base, group, and management map classes. The base map classes represent the fi nest level of spatial detail. Initial polygons were developed using Definiens Professional (at the time of our use, this software was called eCognition), assisted by interpretation of 1:12,000 true-color digital orthophoto quarter quadrangles (DOQQs). These polygons (base map classes) were labeled using manual photo interpretation of the DOQQs and 1:12,000 true-color aerial photography. Field visits verified interpretation concepts. The vegetation map database includes 46 base map classes, which consist of associations, alliances, and park specials classified with quantitative analysis, additional associations and park specials noted during photointerpretation, and non-vegetated land cover, such as infrastructure, land use, and geological land cover. The base map classes consist of 5,007 polygons in the project area. A field-based accuracy assessment of the base map classes showed overall accuracy to be 43.5%. Seven map classes comprise 89.1% of the park vegetated land cover. The group map classes represent aggregations of the base map classes, approximating the group level of the National Vegetation Classification Standard, version 2 (Federal Geographic Data Committee 2007), and reflecting physiognomy and floristics. Terrestrial ecological systems, as described by NatureServe (Comer et al. 2003), were used as the fi rst approximation of the group level. The project team identified 14 group map classes for this project. The overall accuracy of the group map classes was determined using the same accuracy assessment data as for the base map classes. The overall accuracy of the group representation of vegetation was 80.3%. In consultation with park staff , the team developed management map classes, consisting of park-defined groupings of base map classes intended to represent a balance between maintaining required accuracy and providing a focus on vegetation of particular interest or import to park managers. The 23 management map classes had an overall accuracy of 73.3%. While the main products of this project are the vegetation classification and the vegetation map database, a number of ancillary digital geographic information system and database products were also produced that can be used independently or to augment the main products. These products include shapefiles of the locations of field-collected data and relational databases of field-collected data.

Mesa Verde National Park↗

USGS2001

Coal bed sequestration of carbon dioxide

Geologic sequestration of CO 2 generated from fossil fuel combustion may be an environmentally attractive method to reduce the amount of greenhouse gas emissions. Of the geologic options, sequestering CO 2 in coal beds has several advantages. For example, CO 2 injection can enhance methane production from coal beds; coal can trap CO 2 for long periods of time; and potential major coal basins that contain ideal beds for sequestration are near many emitting sources of CO 2 . One mission of the Energy Resources Program of the U.S. Geological Survey is to maintain assessment information of the Nation’s resources of coal, oil, and gas. The National Coal Resources Assessment Project is currently completing a periodic assessment of 5 major coal-producing regions of the US. These regions include the Powder River and Williston and other Northern Rocky Mountain basins (Fort Union Coal Assessment Team, 1999), Colorado Plateau area (Kirschbaum and others, 2000), Gulf Coast Region, Appalachian Basin, and Illinois Basin. The major objective of this assessment is to estimate available coal resources and quality for the major producing coal beds of the next 25 years and produce digital databases and maps. Although the focus of this work has been on coal beds with the greatest potential for mining, it serves as a basis for future assessments of the coal beds for other uses such as coal bed methane resources, in situ gasification, and sites for sequestration of CO 2 . Coal bed methane production combined with CO 2 injection and storage expands the use of a coal resource and can provide multiple benefits including increased methane recovery, methane drainage of a resource area, and the long-term storage of CO 2 .

Conference Paper↗

USGS2006

Contrasting cratonal provenances for upper Cretaceous Valle Group quartzite clasts, Baja California

Late Cretaceous Valle Group forearcbasin deposits on the Vizcaino Peninsula of Baja California Sur are dominated by firstcycle arc-derived volcanic-plutonic detritus derived from the adjacent Peninsular Ranges batholith. Craton-derived quartzite clasts are a minor but ubiquitous component in Valle Group conglomerates. The source of these clasts has implications for tectonic reconstructions and sediment-dispersal paths along the paleo-North American margin. Three strongly contrasting types of quartzite are recognized based on petrology and detrital zircon U-Pb geochronology. The first type is ultramature quartz arenite with well-rounded, highly spherical zircon grains. Detrital zircon ages from this type are nearly all >1.8 Ga with age distributions that closely match the distinctive Middle-Late Ordovician Peace River arch detrital signature of the Cordilleran margin. This type has been previously recognized from prebatholithic rocks in northeast Baja California (San Felipe quartzite). A second quartzite type is subarkosic sandstone with strong affinity to southwestern North America; important features of the age spectra are ~1.0-1.2 Ga, 1.42 and 1.66 Ga peaks representing cratonal basement, 500-300 Ma grains interpreted as recycled Appalachian-derived grains, and 284- 232 Ma zircon potentially derived from the Early Permian-Middle Triassic east Mexico arc. This quartzite type could have been carried to the continental margin during Jurassic time as outboard equivalents of Colorado Plateau eolianites. The third quartzite type is quartz pebble conglomerate with significant ~900- 1400 Ma and ~450-650 Ma zircon components, as well as mid- and late Paleozoic grains. The source of this type of quartzite is more problematic but could match either upper Paleozoic strata in the Oaxaca terrane of southern Mexico or a southwestern North America source. The similarity of detrital 98 zircon spectra in all three Valle Group quartzite types to rocks of the adjacent Cordilleran margin support previous interpretations that Valle Group forearc basin sediments were deposited in proximity to rocks on the mainland of northwest Mexico and southwestern United States.

Book chapter↗

USGS2019

Identifying characteristics of actionable science for drought planning and adaptation: Final report to the North Central Climate Adaptation Science Center

Changing climate conditions can make water management planning and drought preparedness decisions more complicated than ever before. Resource managers can no longer rely solely on historical data and trends to base their actions, and are in need of science that is relevant to their specific needs and can directly inform important planning decisions. Questions remain, however, regarding the most effective and efficient methods for extending scientific knowledge and products into management and decision-making. This study analyzed two unique cases of water management to better understand how science can be translated into resource management actions and decision-making. In particular, this project sought to understand 1) the characteristics that make science actionable and useful for water resource management and drought preparedness, and 2) the ideal types of scientific knowledge or science products that facilitate the use of science in management and decision-making. The first case study focused on beaver mimicry, an emerging nature-based solution that increases the presence of wood and woody debris in rivers and streams to mimic the actions of beavers. This technique has been rapidly adopted by natural resource managers as a way to restore riparian areas, increase groundwater infiltration, and slow surface water flow so that more water is available later in the year during hotter and dryer months. The second case study focused on an established research program, Colorado Dust on Snow, that provides water managers with scientific information explaining how the movement of dust particles from the Colorado Plateau influences hydrology and the timing and intensity of snow melt and water runoff into critical water sources. This program has support from and is being used by several water conservation districts in the state. Understanding how scientific knowledge translates into action and decision-making in these cases is expected to strengthen our knowledge of actionable science in the context of drought and its impacts on ecosystems. The project team gathered qualitative data through stakeholder interviews and will conduct an extensive literature review. Findings from these efforts will also be incorporated into a broader Intermountain West synthesis effort to determine and assess commonalities and differences among socio-ecological aspects of drought adaptation and planning.

Colorado, Kansas, Montana, Nebraska, North Dakota,↗

USGS2022

Fault-influenced incision in western Grand Canyon, Arizona U.S.A.

Preliminary interpretation of new and updated incision rates in western Grand Canyon shows the effects of Quaternary faulting, which dampens river incision rates in the footwalls and amplifies them in the hanging walls of normal faults. In the reach between Lava Falls and Diamond Creek in western Grand Canyon, about 178 to 225 river miles downstream from Lees Ferry, the river crosses the neotectonically active Hurricane and Toroweap faults. For this reach, we offer a preliminary analysis of 23 new and updated incision rates determined from new U-Th dating of travertine associated with perched river gravel and previously published 40Ar/39Ar ages on intracanyon basalt flows that overlie river gravel. Results reveal diminished incision rates downstream of both the Hurricane and Toroweap faults, indicating the presence and geometry of hanging-wall anticlines with wavelengths of about 10 km. Upstream of the faults, increased incision rates are interpreted to represent localized footwall uplifts and/or regional block uplift, which could contribute to the overall uplift of the Colorado Plateau.

Arizona↗