Search USGS⌕ Search

SEARCH · Search USGS

Results for “Oregon Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources
USGS1986

Geochemical map of the North Fork John Day River Roadless Area, Grant County, Oregon

The Wilderness Act (Public Law 88-577, September 3, 1964) and related acts require the U.S. Geological Survey and the U.S. Bureau of Mines to survey certain areas on Federal lands to determine their mineral resource potential. Results must be made available to the public and submitted to the President and the Congress. This report presents the analytical results of a geochemical survey of the North Fork John Day River Roadless Area (B6253) in the Umatilla and Wallowa-Whitman National Forests, Grant County, Oregon. The North Fork John Day River Roadless Area was classified as a further planning area during the Second Roadless Area Review and Evaluation (RARE II) by the U.S. Forest Service, January 1979. The North Fork John Day River Roadless Area comprised 21,210 acres in the Umatilla and Wallowa-Whitman National Forests, Grant County, Oregon, about 30 miles northwest of Baker, Oregon. The irregularly shaped area extends for about 1 mile on both sides of a 25-mile segment of the North Fork John Day River from Big Creek on the west to North Fork John Day Campground on the east. Most of the roadless area is in the northern half of the Desolation Butte 15-minute quadrangle. The eastern end of the area is in parts of the Granite and Trout Meadows 7½-minute quadrangles.

Oregon↗
USGS2012

Groundwater status and trends for the Columbia Plateau Regional Aquifer System, Washington, Oregon, and Idaho

Well information and groundwater-level measurements for the Columbia Plateau Regional Aquifer System in Washington, Oregon, and Idaho, were compiled from data provided by the U.S. Geological Survey and seven other organizations. From the full set of about 60,000 wells and 450,000 water-level measurements a subset of 761 wells within the aquifers of the Columbia River Basalt Group (CRBG) then was used to develop a simple linear groundwater-level trend map for 1968–2009. The mean of the trends was a decline of 1.9 feet per year (ft/yr), with 72 percent of the water levels in wells declining. Rates of declines greater than 1.0 ft/yr were measured in 50 percent of wells, declines greater than 2.0 ft/yr in 38 percent of wells, declines greater than 4.0 ft/yr in 29 percent of wells, and declines greater than 8.0 ft/yr in 4 percent of wells. Water-level data were used to identify groups of wells with similar hydraulic heads and temporal trends to delineate areas of overall similar groundwater conditions. Discontinuities in hydraulic head between well groups were used to help infer the presence of barriers to groundwater flow such as changes in lithology or the occurrence of folds and faults. In areas without flow barriers, dissimilarities in response of well groups over time resulted from the formation of groundwater mounds caused by recharge from irrigation or regions of decline caused by pumping. The areas of focus for this analysis included the Umatilla area, Oregon, and the Palouse Slope/eastern Yakima Fold Belt in the Columbia Basin Ground Water Management Area (GWMA) consisting of Adams, Franklin, Grant, and Lincoln Counties, Washington. In the Umatilla area, water levels from 286 wells were used to identify multiple areas of high hydraulic gradient that indicate vertical and horizontal barriers to groundwater flow. These barriers divide the groundwater-flow system into several compartments with varying degrees of interconnection. Horizontal flow barriers commonly correspond to mapped geologic structure and result in horizontal hydraulic gradients that progressively become steeper from north to south corresponding to an increase in structural complexity that may be impeding recharge from the uplands into the heavily developed areas. Most CRBG aquifers in the Umatilla area are declining and since 1970, cumulative declines range from about 100 to 300 feet. Significant vertical hydraulic gradients are documented for relatively small areas near Umatilla, and since the 1970s, downward vertical gradients in these areas have been increasing as hydraulic heads in the deeper units have declined. The absence of vertical gradients over much of the area may be a consequence of flow through commingling wells that results in the equilibration of the heads between aquifers. On the Palouse Slope in the central GWMA, large groundwater declines occurred during 1968–2009 along a north-south swath in the middle of the region. An analysis of 1,195 wells along major flow paths and through the area of persistent groundwater-level declines indicates that barriers to flow are not as evident in this area as in Umatilla. This is consistent with the geologic interpretation of the Palouse Slope as being a gently folded structure created by voluminous sheet flows of CRBG lavas. Groundwater discharge into the sediment-filled coulees, where the upper aquifers are intersected at land surface by incised canyons, is proposed as an alternative to explain local steepening of the hydraulic gradient along the Palouse Slope previously attributed to the presence of a groundwater dam. Comparison of generalized potentiometric surface maps developed for pre-development conditions and post-2000 conditions indicate that pre-development groundwater flow was from the uplands toward the Columbia and Snake River and that post-2000 flow patterns in the area are controlled by irrigation practices that have resulted in broad regions of elevated or depressed hydraulic head. In some cases, irrigation-related changes in head have reversed groundwater flow directions. Evidence of significant vertical hydraulic gradients exists, although much of the aquifer thickness is affected by commingling of wells. The effect of commingling and its relative contribution to problems related to groundwater-level declines remains unclear.

Washington, Oregon, Idaho↗
USGS2016

Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Scientific Investigations Report 2016–5089 and accompanying data releases are the products of the U.S. Geological Survey (USGS) Sagebrush Mineral-Resource Assessment (SaMiRA). The assessment was done at the request of the Bureau of Land Management (BLM) to evaluate the mineral-resource potential of some 10 million acres of Federal and adjacent lands in Idaho, Montana, Nevada, Oregon, Utah, and Wyoming. The need for this assessment arose from the decision by the Secretary of the Interior to pursue the protection of large tracts of contiguous habitat for the greater sage-grouse ( Centrocercus urophasianus ) in the Western United States. One component of the Department of the Interior plan to protect the habitat areas includes withdrawing selected lands from future exploration and development of mineral and energy resources, including copper, gold, silver, rare earth elements, and other commodities used in the U.S. economy. The assessment evaluates the potential for locatable minerals such as gold, copper, and lithium and describes the nature and occurrence of leaseable and salable minerals for seven Sagebrush Focal Areas and additional lands in Nevada (“Nevada additions”) delineated by BLM. Supporting data are available in a series of USGS data releases describing mineral occurrences (the USGS Mineral Deposit Database or “USMIN”), oil and gas production and well status, previous mineral-resource assessments that covered parts of the areas studied, and a compilation of mineral-use cases based on data provided by BLM, as well as results of the locatable mineral-resource assessment in a geographic information system. The present assessment of mineral-resource potential will contribute to a better understanding of the economic and environmental trade-offs that would result from closing approximately 1 0 million acres of Federal lands to mineral entry.

Idaho, Montana, Nevada, Oregon, Utah, Wyoming↗
USGS1988

Selected ground-water information for the Columbia Plateau Regional Aquifer System, Washington and Oregon, 1982-1985; Volume I. Geohydrology

This data report presents groundwater information collected and analyzed as part of the U.S. Geological Survey 's Columbia Plateau Regional Aquifer System Analysis study. The information was gathered from July 1982 through September 1985 in the part of the aquifer system in central and eastern Washington, and north-central and eastern Oregon. The report consists of three volumes: volume I, geohydrology; volume II, water levels; and volume III, groundwater quality. (See also W89-02573) (USGS)

Open-File Report↗
USGS2006

Geologic map of the Lacamas Creek quadrangle, Clark County, Washington

The Lacamas Creek 7.5 minute quadrangle is in southwestern Washington, approximately 25 km northeast of Portland, Oregon, along the eastern margin of the Portland Basin, which is part of the Puget-Willamette Lowland that separates the Cascade Range from the Oregon Coast Range. Since late Eocene time, the Cascade Range has been the locus of an episodically active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. Lava flows that erupted early in the history of the arc underlie the eastern half of the Lacamas Creek quadrangle, forming a dissected terrain, with elevations as high as 2050 ft (625 m), that slopes irregularly but steeply to the southwest. These basalt and basaltic andesite flows erupted in early Oligocene time from one or more vents located outside the map area. The flows dip gently (less than 5 degrees) west to southwest. In the western part of the map area, volcanic bedrock is unconformably overlain by middle Miocene to early Pleistocene(?) sediments that accumulated as the Portland Basin subsided. These sediments consist mostly of detritus carried into the Portland Basin by the ancestral Columbia River. Northwest-striking faults offset the Paleogene basin floor as well as the lower part of the basin fill. In middle Pleistocene time, basalt and basaltic andesite erupted from three small volcanoes in the southern half of the map area. These vents are in the northern part of the Boring volcanic field, which comprises several dozen late Pliocene and younger monogenetic volcanoes scattered throughout the greater Portland region. In latest Pleistocene time, the Missoula floods of glacial-outburst origin inundated the Portland Basin. The floods deposited poorly sorted gravels in the southwestern part of the Lacamas Creek quadrangle that grade northward into finer grained sediments. This map is a contribution to a program designed to improve geologic knowledge of the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. More detailed information on the bedrock and surficial geology of the basin and its surrounding area is necessary to refine assessments of seismic risk, ground-failure hazards and resource availability in this rapidly growing region.

Scientific Investigations Map↗
USGS1988

Selected ground-water information for the Columbia Plateau Regional Aquifer System, Washington and Oregon, 1982-1985; Volume II. Water levels

This data report presents groundwater information collected and analyzed as part of the U.S. Geological Survey 's Columbia Plateau Regional Aquifer System Analysis study. The information was gathered from July 1982 through September 1985 in the part of the aquifer system in central and eastern Washington, and north-central and eastern Oregon. The report consists of three volumes: volume I, geohydrology; volume II, water levels; and volume III, groundwater quality. (See also W89-02572) (USGS)

Open-File Report↗
USGS2021

Eroding Cascadia— Sediment and solute transport and landscape denudation in western Oregon and northwestern California

Riverine measurements of sediment and solute transport give empirical basin-scale estimates of bed-load, suspended-sediment, and silicate-solute fluxes for 100,000 km 2 of northwestern California and western Oregon. This spatially explicit sediment budget shows the multifaceted control of geology and physiography on the rates and processes of fluvial denudation. Bed-load transport is greatest for steep basins, particularly in areas underlain by the accreted Klamath terrane. Bed-load flux commonly decreases downstream as clasts convert to suspended load by breakage and attrition, particularly for softer rock types. Suspended load correlates strongly with lithology, basin slope, precipitation, and wildfire disturbance. It is highest in steep regions of soft rocks, and our estimates suggest that much of the suspended load is derived from bed-load comminution. Dissolution, measured by basin-scale silicate-solute yield, constitutes a third of regional landscape denudation. Solute yield correlates with precipitation and is proportionally greatest in low-gradient and wet basins and for high parts of the Cascade Range, where undissected Quaternary volcanic rocks soak in 2−3 m of annual precipitation. Combined, these estimates provide basin-scale erosion rates ranging from ∼50 t ∙ km −2 ∙ yr −1 (approximately equivalent to 0.02 mm ∙ yr −1 ) for low-gradient basins such as the Willamette River to ∼500 t ∙ km −2 ∙ yr −1 (∼0.2 mm ∙ yr −1 ) for steep coastal drainages. The denudation rates determined here from modern measurements are less than those estimated by longer-term geologic assessments, suggesting episodic disturbances such as fire, flood, seismic shaking, and climate change significantly add to long-term landscape denudation.

California, Oregon, Washington↗
USGS2006

Regional surficial geochemistry of the northern Great Basin

The regional distribution of arsenic and 20 other elements in stream-sediment samples in northern Nevada and southeastern Oregon was studied in order to gain new insights about the geologic framework and patterns of hydrothermal mineralization in the area. Data were used from 10,261 samples that were originally collected during the National Uranium Resource Evaluation (NURE) Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) program in the 1970s. The data are available as U.S. Geological Survey Open-File Report 02-0227. The data were analyzed using traditional dot maps and interpolation between data points to construct high-resolution raster images, which were correlated with geographic and geologic information using a geographic information system (GIS). Wavelength filters were also used to deconvolute the geochemical images into various textural components, in order to study features with dimensions of a few kilometers to dimensions of hundreds of kilometers. The distribution of arsenic, antimony, gold, and silver is different from distributions of the other elements in that they show a distinctive high background in the southeast part of the area, generally in areas underlain by the pre-Mesozoic craton. Arsenic is an extremely mobile element and can be used to delineate structures that served as conduits for the circulation of metal-bearing fluids. It was used to delineate large crustal structures and is particularly good for delineation of the Battle Mountain-Eureka mineral trend and the Steens lineament, which corresponds to a post-Miocene fault zone. Arsenic distribution patterns also delineated the Black Rock structural boundary, northwest of which the basement apparently consists entirely of Miocene and younger crust. Arsenic is also useful to locate district-sized hydrothermal systems an d clusters of systems. Most important types of hydrothermal mineral deposit in the northern Great Basin appear to be strongly associated with arsenic; this is less so for low-sulfidation epithermal deposits. In addition to individual elements, the distribution of factor scores that resulted from principal component studies of the data was used. The strongest factor is characterized by Fe, Ti, V, Cu, Ni, and Zn and is used to map the distribution of distinctive basalts that are high in Cu, Ni, and Zn and that appear to be related to the Steens Basalt. The other important factor is related to hydrothermal precious metal mineralization and is characterized by Sb, Ag, As, Pb, Au, and Zn. The map of the distribution of this factor is similar in appearance to the one for arsenic, and we used wavelength filters to remove regional variations in the background for this factor score. The resulting residual map shows a very strong association with the most significant precious metal deposits and districts in the region. This residual map also shows a number of areas that are not associated with known mineral deposits, illustrating the utility of the method as a regional exploration tool. A number of these prospective areas are distant from known significant mineral deposits. The deconvolution of the spatial wavelength structure of geochemical maps, combined with the use of large regional geochemical data sets and GIS, permits new possibilities for the use of stream-sediment geochemistry in the study of large-scale crustal features as well as the isolation of mineral-district scale anomalies. ?? 2006 Society of Economic Geologists, Inc.

Economic Geology↗
USGS2021

National-scale reservoir thermal energy storage pre-assessment for the United States

The U.S. Geological Survey is performing a pre-assessment of the cooling potential for reservoir thermal energy storage (RTES) in five generalized geologic regions (Basin and Range, Coastal Plains, Illinois Basin, Michigan Basin, Pacific Northwest) across the United States. Reservoir models are developed for the metropolitan areas of eight cities (Albuquerque, New Mexico; Charleston, South Carolina; Chicago and Decatur, Illinois; Lansing, Michigan; Memphis, Tennessee; Phoenix, Arizona; and Portland, Oregon) so that computed metrics can be compared to evaluate RTES potential across diverse climates, geologic settings, and physiography. Permeable, semi-confined/confined units that underlie more-utilized aquifers and contain low-quality groundwater are selected for each city. Energy storage metrics are computed for the anticipated total thickness of stratigraphy for which RTES might be feasible, including estimated required well spacing, thermal storage capacity, and thermal recovery efficiency over time. Falta et al. (2016) showed that for a modern 25,000 square-foot (2,323 square-meter), two-story office building, cooling needs exceed heating demand for almost every region of the country. We therefore use Falta et al.’s cooling demand for each city as the representative RTES stress condition for metric computation, allowing comparisons across regions. Results indicate that favorable RTES conditions exist in each region, particularly in the Illinois Basin, Coastal Plains, and Basin and Range. Thermal recovery efficiencies are very high in all regions and increase over time. The thermal storage capacity metric is most informative in the pre-assessment and underscores the importance of mapping reservoir thicknesses and porosities to permit detailed mapping of thermal storage capacity per unit area as a key RTES resource classification standard. This assessment provides a basic understanding of the RTES potential in several metropolitan areas and geologic regions throughout the United States and will aid further evaluation of national RTES efficacy.

Conference Paper↗
USGS2017

Geologic map of the Beacon Rock quadrangle, Skamania County, Washington

The Beacon Rock 7.5′ quadrangle is located approximately 50 km east of Portland, Oregon, on the north side of the Columbia River Gorge, a scenic canyon carved through the axis of the Cascade Range by the Columbia River. Although approximately 75,000 people live within the gorge, much of the region remains little developed and is encompassed by the 292,500-acre Columbia River Gorge National Scenic Area, managed by a consortium of government agencies “to pro­tect and provide for the enhancement of the scenic, cultural, recreational and natural resources of the Gorge and to protect and support the economy of the Columbia River Gorge area.” As the only low-elevation corridor through the Cascade Range, the gorge is a critical regional transportation and utilities corridor (Wang and Chaker, 2004). Major state and national highways and rail lines run along both shores of the Columbia River, which also provides important water access to ports in the agricultural interior of the Pacific Northwest. Transmission lines carry power from hydroelectric facilities in the gorge and farther east to the growing urban areas of western Oregon and Washington, and natural-gas pipelines transect the corridor (Wang and Chaker, 2004). These lifelines are highly vulnerable to disruption by earthquakes, landslides, and floods. A major purpose of the work described here is to identify and map geologic hazards, such as faults and landslide-prone areas, to provide more accurate assessments of the risks associated with these features. The steep canyon walls of the map area reveal exten­sive outcrops of Miocene flood-basalt flows of the Columbia River Basalt Group capped by fluvial deposits of the ances­tral Columbia River, Pliocene lavas erupted from the axis of the Cascade arc to the east, and volcanic rocks erupted from numerous local vents. The Columbia River Basalt Group unconformably rests on a sequence of late Oligocene and early Miocene rocks of the ancestral Cascade volcanic arc, which underlies most of the map area. The resistant flood-basalt flows form some of the famous landforms in the map area, such as Hamilton Mountain. Extensive landslide complexes have devel­oped where the basalt flows were emplaced on weak volcani­clastic rocks.

Washington↗
USGS2014

Evaluation of alternative groundwater-management strategies for the Bureau of Reclamation Klamath Project, Oregon and California

The water resources of the upper Klamath Basin, in southern Oregon and northern California, are managed to achieve various complex and interconnected purposes. Since 2001, irrigators in the Bureau of Reclamation Klamath Irrigation Project (Project) have been required to limit surface-water diversions to protect habitat for endangered freshwater and anadromous fishes. The reductions in irrigation diversions have led to an increased demand for groundwater by Project irrigators, particularly in drought years. The potential effects of sustained pumping on groundwater and surface-water resources have caused concern among Federal and state agencies, Indian tribes, wildlife groups, and groundwater users. To aid in the development of a viable groundwater-management strategy for the Project, the U.S. Geological Survey, in collaboration with the Klamath Water and Power Agency and the Oregon Water Resources Department, developed a groundwater-management model that links groundwater simulation with techniques of constrained optimization. The overall goal of the groundwater-management model is to determine the patterns of groundwater pumping that, to the extent possible, meet the supplemental groundwater demands of the Project. To ensure that groundwater development does not adversely affect groundwater and surface-water resources, the groundwater-management model includes constraints to (1) limit the effects of groundwater withdrawal on groundwater discharge to streams and lakes that support critical habitat for fish listed under the Endangered Species Act, (2) ensure that drawdowns do not exceed limits allowed by Oregon water law, and (3) ensure that groundwater withdrawal does not adversely affect agricultural drain flows that supply a substantial portion of water for irrigators and wildlife refuges in downslope areas of the Project. Groundwater-management alternatives were tested and designed within the framework of the Klamath Basin Restoration Agreement (currently [2013] awaiting authorizing Federal legislation), which would establish a permanent limit on the amount of surface water that can be diverted annually to the Project. Groundwater-management scenarios were evaluated for the period 1970•2004; supplemental groundwater demand by the Project was estimated as the part of irrigation demand that would not have been satisfied by the surface-water diversion allowed under the Klamath Basin Restoration Agreement. Over the 35-year management period, 22 years have supplemental groundwater demand, which ranges from a few thousand acre-feet (acre-ft) to about 100,000 acre-ft in the driest years. The results of the groundwater-management model indicate that supplemental groundwater pumping by the Project can be managed to avoid adverse effects to groundwater discharge that supports critical aquatic habitat. The existing configuration of wells in the Project would be able to meet groundwater-pumping goals in 14 of the 22 years with supplemental groundwater demand; however, substantial irrigation shortages can be expected during drought periods when the demand for supplemental groundwater is highest. The maximum irrigation-season withdrawal calculated by the groundwater-management model is about 60,000 acre-ft, the average withdrawal in drought years is about 54,000 acre-ft, and the amount of unmet groundwater demand reaches a maximum of about 45,000 acre-ft. A comparison of optimized groundwater withdrawals by geographic region shows that the highest annual withdrawals are associated with wells in the Tule Lake and Klamath Valley regions of the Project. The patterns of groundwater withdrawal also show that a substantial amount of the available pumping capacity is unused due to the restrictions imposed by drawdown constraints. Subsequent model applications were used to evaluate the sensitivity of optimization results to various factors. A sensitivity analysis quantified the changes in optimized groundwater withdrawals that result from changes in drawdown-constraint limits. The analysis showed the potential for substantial increases in withdrawals of groundwater with less restrictive drawdown limits at drawdown-control sites in the California part of the model. Systematic variation of the drains-constraint limit yielded a trade-off curve between optimized groundwater withdrawals and the allowable reduction in groundwater discharge to the Project drain system. Additional model applications were used to assess the value of increasing the pumping capacity of the network of wells serving the Project, and the relation between reduced off-Project groundwater pumping and increased pumping by Project irrigators.

California;Oregon↗
USGS2006

Geologic map of the Yacolt quadrangle, Clark County, Washington

The Yacolt 7.5' quadrangle is situated in the foothills of the western Cascade Range of southwestern Washington approximately 35 km northeast of Portland, Oregon. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. Volcanic and shallow-level intrusive rocks emplaced early in the history of the arc underlie most of the Yacolt quadrangle, forming a dissected and partly glaciated terrain with elevations between 250 and 2180 ft (75 and 665 m). The bedrock surface slopes irregularly but steeply to the southwest, forming the eastern margin of the Portland Basin, and weakly consolidated Miocene and younger basin-fill sediments lap up against the bedrock terrain in the southern part of the map area. A deep canyon, carved by the East Fork Lewis River that flows westward out of the Cascade Range, separates Yacolt and Bells Mountains, the two highest points in the quadrangle. Just west of the quadrangle, the river departs from its narrow bedrock channel and enters a wide alluvial floodplain. Bedrock of the Yacolt quadrangle consists of near-horizontal strata of Oligocene volcanic and volcaniclastic rocks that comprise early products of the Cascade volcanic arc. Basalt and basaltic andesite flows predominate. Most were emplaced on the flanks of a large mafic shield volcano and are interfingered with crudely bedded sections of volcanic breccia of probable lahar origin and a variety of well bedded epiclastic sedimentary rocks. At Yacolt Mountain, the volcanogenic rocks are intruded by a body of Miocene quartz diorite that is compositionally distinct from any volcanic rocks in the map area. The town of Yacolt sits in a north-northwest-trending valley apparently formed within a major fault zone. Several times during the Pleistocene, mountain glaciers moved down the Lewis River valley and spread southward into the map area. The largest glacier(s) covered the entire map area north of the East Fork Lewis River except for the summit of Yacolt Mountain. As the ice receded, it left behind a sculpted bedrock topography thickly mantled by drift, and deposited outwash in the fault-bounded valley at Yacolt and along the East Fork Lewis River valley. This map is a contribution to a program designed to improve geologic knowledge of the Portland Basin region of the Pacific Northwest urban corridor, the densely populated Cascadia forearc region of western Washington and Oregon. More detailed information on the bedrock and surficial geology of the basin and its surrounding area is necessary to refine assessments of seismic risk, ground-failure hazards and resource availability in this rapidly growing region.

Scientific Investigations Map↗
USGS2026

Groundwater tracing used to delineate recharge areas and map karst groundwater pathways for subterranean streams at Oregon Caves National Monument and Preserve

Oregon Caves National Monument and Preserve in southwestern Oregon is a 4,554-​acre area managed by the National Park Service that is home to several cave systems, including Oregon Caves, which is the longest cave in Oregon, with 3.03 miles of mapped passages. Because of the interconnected nature of karst hydrologic systems, it is critical to understand the areas that can influence water quality and quantity in karst environments. Toward this goal, dye tracing was conducted by the U.S. Geological Survey from 2021 to 2024 to better understand the pathways that karst groundwater follows at Oregon Caves National Monument and Preserve and to delineate recharge areas for two caves, Oregon Caves and Cave Next Door. During the project, eight dye injections were conducted, delineating a 0.51-​square-​mile recharge area for Oregon Caves and a 0.69-​square-​mile recharge area for Cave Next Door. Additionally, the study helped to identify three resurgences associated with Oregon Caves that were previously unknown and showed that the recharge areas for the two caves were distinct from one another. The dye traces also illuminated some unique recharge characteristics of the karst at Oregon Caves, including a high variance in karst groundwater velocities, retention within the karst aquifers, and a significant diffuse-​flow component.

Oregon↗
USGS2008

Multibeam Sonar Mapping and Modeling of a Submerged Bryophyte Mat in Crater Lake, Oregon

Traditionally, multibeam data have been used to map sea floor or lake floor morphology as well as the distribution of surficial facies in order to characterize the geologic component of benthic habitats. In addition to using multibeam data for geologic studies, we want to determine if these data can also be used directly to map the distribution of biota. Multibeam bathymetry and acoustic backscatter data collected in Crater Lake, Oregon, in 2000 are used to map the distribution of a deep-water bryophyte mat, which will be extremely useful for understanding the overall ecology of the lake. To map the bryophyte's distribution, depth range, acoustic backscatter intensity, and derived bathymetric index grids are used as inputs into a hierarchical decision-tree classification model. Observations of the bryophyte mat from over 23 line kilometers of lake-floor video collected in the summer of 2006 are used as controls for the model. The resulting map matches well with ground-truth information and shows that the bryophyte mat covers most of the platform surrounding Wizard Island as well as on outcrops around the caldera wall.

Data Series↗
USGS1996

Ground-water data for the Warm Springs Indian Reservation and contiguous areas, north-central Oregon

This report presents well data that were collected and compiled during 1985-86 by the U.S. Geological Survey and used to determine the amount of ground water discharging to the Deschutes River on and near the Warm Springs Indian Reservation. The report contains well-construction data from 171 wells, information from drillers' logs for 66 wells, water-level data for 29 wells, and a map showing well locations.

Oregon↗
USGS2005

The seismic project of the National Tsunami Hazard Mitigation Program

In 1997, the Federal Emergency Management Agency (FEMA), National Oceanic and Atmospheric Administration (NOAA), U.S. Geological Survey (USGS), and the five western States of Alaska, California, Hawaii, Oregon, and Washington joined in a partnership called the National Tsunami Hazard Mitigation Program (NTHMP) to enhance the quality and quantity of seismic data provided to the NOAA tsunami warning centers in Alaska and Hawaii. The NTHMP funded a seismic project that now provides the warning centers with real-time seismic data over dedicated communication links and the Internet from regional seismic networks monitoring earthquakes in the five western states, the U.S. National Seismic Network in Colorado, and from domestic and global seismic stations operated by other agencies. The goal of the project is to reduce the time needed to issue a tsunami warning by providing the warning centers with high-dynamic range, broadband waveforms in near real time. An additional goal is to reduce the likelihood of issuing false tsunami warnings by rapidly providing to the warning centers parametric information on earthquakes that could indicate their tsunamigenic potential, such as hypocenters, magnitudes, moment tensors, and shake distribution maps. New or upgraded field instrumentation was installed over a 5-year period at 53 seismic stations in the five western states. Data from these instruments has been integrated into the seismic network utilizing Earthworm software. This network has significantly reduced the time needed to respond to teleseismic and regional earthquakes. Notably, the West Coast/Alaska Tsunami Warning Center responded to the 28 February 2001 Mw 6.8 Nisqually earthquake beneath Olympia, Washington within 2 minutes compared to an average response time of over 10 minutes for the previous 18 years. ?? Springer 2005.

Natural Hazards↗