SEARCH · Search USGS

Results for “Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources

USGS2026

Terrain-based map of mélange and intact rock at the junction of Coastal and Central Belt rocks of the Franciscan Complex between Gualala and Ukiah, northern California Coast Ranges

A terrain-based map of a large area of Franciscan Complex between the San Andreas and Maacama faults east of Point Arena, California, provides much new detail compared to prior mapping. The new map reveals an unusual, structurally disrupted area that is defined by northwest-trending patches of erosionally resistant topography interspersed in subdued topography. These two terrain types, here termed Hard and Soft, are distinguished using differences in the detailed shapes of individual topographic elements that in these rocks are indicative of relatively intact rock and severely sheared mélange. The disrupted area lies at the junction between rocks of two different parts of the Franciscan Complex: sandstone and argillite of the Coastal belt to the northwest and mélange and variously metamorphosed sandstone and other rocks of the Central belt to the southeast. The rocks in the disrupted area seem to consist largely of Coastal belt sandstone interspersed in Central belt mélange. They are separated from areally continuous Coastal belt to the west by the newly defined Cedars fault and from continuous mélange of the Central belt to the east by the newly defined Boonville fault. A plausible history to account for Coastal belt rocks and Central belt mélange now interspersed at the same structural level in the disrupted area is westward thrusting of Central belt over Coastal belt on the Coastal belt thrust, located mostly above the present level of exposure, followed by extensional dip-slip faulting involving both the disrupted area and its bounding faults. Most of the study area has been mapped on the ground only in reconnaissance. The terrain map was prepared largely by interpretation of small-scale aerial photographs, with distinctions in the steepness of slopes and curvature of ridge and side-hill crests made from the photographs. These distinctions were then confirmed by differences in their areal abundance determined through quantitative mapping of slope and curvature. Most of the remainder of the map was prepared in the same fashion directly from the slope and curvature maps. Geologic identities are assigned to as much of the area as possible, but some resistant parts, mostly in the disturbed area, remain identified solely as Hard terrain. Some units, mostly along the southern edge of the map, are compiled from published sources. This report serves as a description and explanation of the associated spatial database (Wentworth, 2025), which consists of attributed line and polygon shape files and metadata describing them.

California↗

USGS2006

Database for the east half of "Preliminary Geologic Map of the Blythe 30' by 60' quadrangle, California and Arizona"

This digital map database was prepared from the published Preliminary Geologic Map of the Blythe 30' by 60' Quadrangle, California and Arizona (U.S. Geological Survey Open-File Report 90-497). This database represents the east half of the original published map. The database contains exactly the same scientific content as the original map; no data have been added to, subtracted from, or modified from the original map. Like the original paper map, this database represents the general distribution of bedrock and surficial deposits in the mapped area. It provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the original published map limits the spatial resolution (scale) of the database to 1:100,000 or smaller.

Arizona, California↗

USGS2010

Database for the geologic map of the Bend 30- x 60-minute quadrangle, central Oregon

The Bend 30- x 60-minute quadrangle has been the locus of volcanism, faulting, and sedimentation for the past 35 million years. It encompasses parts of the Cascade Range and Blue Mountain geomorphic provinces, stretching from snowclad Quaternary stratovolcanoes on the west to bare rocky hills and sparsely forested juniper plains on the east. The Deschutes River and its large tributaries, the Metolius and Crooked Rivers, drain the area. Topographic relief ranges from 3,157 m (10,358 ft) at the top of South Sister to 590 m (1,940 ft) at the floor of the Deschutes and Crooked Rivers where they exit the area at the north-central edge of the map area. The map encompasses a part of rapidly growing Deschutes County. The city of Bend, which has over 70,000 people living in its urban growth boundary, lies at the south-central edge of the map. Redmond, Sisters, and a few smaller villages lie scattered along the major transportation routes of U.S. Highways 97 and 20. This geologic map depicts the geologic setting as a basis for structural and stratigraphic analysis of the Deschutes basin, a major hydrologic discharge area on the east flank of the Cascade Range. The map also provides a framework for studying potentially active faults of the Sisters fault zone, which trends northwest across the map area from Bend to beyond Sisters. This digital release contains all of the information used to produce the geologic map published as U.S. Geological Survey Geologic Investigations Series I-2683 (Sherrod and others, 2004). The main component of this digital release is a geologic map database prepared using ArcInfo GIS. This release also contains files to view or print the geologic map and accompanying descriptive pamphlet from I-2683.

Oregon↗

USGS2002

Surficial geologic maps along the riparian zone of the Animas River and its headwater tributaries, Silverton to Durango, Colorado, with upper Animas River watershed gradient profiles

This product consists of Adobe Acrobat .PDF format documents for 10 surficial geologic strip maps along the Animas River watershed from its major headwater tributaries, south to Durango, Colorado. The Animas River originates in the San Juan Mountains north of the historic mining town of Silverton, Colorado. The surficial geologic maps identify surficial deposits, such as flood-plain and terrace gravels, alluvial fans, glacial till, talus, colluvium, landslides, and bogs. Sixteen primary units were mapped that included human-related deposits and structures, eight alluvial, four colluvial, one glacial, travertine deposits, and undifferentiated bedrock. Each of the surficial geologic strip maps has .PDF links to surficial geology photographs, which enable the user to take a virtual tour of these deposits. Geochemical data collected from mapped surficial deposits that pre- and postdate mining activity have aided in determining the geochemical baseline in the watershed. Several photographs with their corresponding geochemical baseline profiles are accessible through .PDF links from several of the maps. A single coverage for all surficial deposits mapped is included as an ArcInfo shape file as an Arc Export format .e00 file. A gradient map for major headwater tributary streams to the Animas River is also included. The gradient map has stream segments that are color-coded based on relative variations in slope and .PDF format links to each stream gradient profile. Stream gradients were derived from U.S. Geological Survey 10-m digital elevation model data. This project was accomplished in support of the U.S. Geological Survey's Abandoned Mine Lands Initiative in the San Juan Mountains, Colorado.

Colorado↗

USGS2016

Database compilation for the geologic map of the San Francisco volcanic field, north-central Arizona

The main component of this publication is a geologic map database prepared using geographic information system (GIS) applications. The geodatabase of geologic points, lines, and polygons was produced as a compilation from five adjoining map sections originally published as printed maps in 1987 (see references in metadata). Four of the sections (U.S. Geological Survey Miscellaneous Field Studies Maps MF–1957, MF–1958, MF–1959, MF–1960) were created by scanning and geo-referencing stable base map material consisting of mylar positives. The final section (MF–1956) was compiled by hand tracing an enlargement of the available printed paper base map onto mylar using a #00 rapidograph pen, the mylar positive was then digitally scanned and geo-referenced. This method was chosen because the original basemap materials (mylar positives) for the MF–1956 section were unavailable at the time of this publication. Due to the condition of the available MF–1956 map section used as the base (which had previously been folded) the accuracy within the boundary of the MF–1956 section is presumed to be degraded in certain areas. The locations of the degraded areas and the degree of degradation within these areas is unclear. Final compilation of the database was completed using the ArcScan toolset, and the Editor toolset in ESRI ArcMap 10.1. Polygon topology was created from the lines and labels were added to the resultant geological polygons, lines, and points. Joseph A. Bard and David W. Ramsey updated and corrected the geodatabase, created the metadata and web presence, and provided the GIS-expertise to bring the geodatabase and metadata to completion. Included are links to files to view or print the original map sheets and the accompanying pamphlets. The orignial geologic maps were prepared under the Geothermal Research Program of the U.S. Geological Survey as a basis for interpreting the history of magmatic activity in the volcanic field. The San Francisco field, which is largely Pleistocene in age, is in northern Arizona, just north of the broad transition zone between the Colorado Plateau and the Basin and Range province. It is one of several dominantly basaltic volcanic fields of the late Cenozoic age situated near the margin of the Colorado Plateau. The volcanic field contains rocks ranging in composition from basalt to rhyolite—the products of eruption through Precambrian basement rocks and approximately a kilometer of overlying, nearly horizontal, Paleozoic and Mesozoic sedimentary rocks. About 500 km 3 of erupted rocks cover about 5,000 km 2 of predominantly Permian and locally preserved Triassic sedimentary rocks that form the erosionally stripped surface of the Colorado Plateau in Northern Arizona.

Arizona↗

USGS2002

Coastal-Change and Glaciological Maps of the Antarctic Peninsula

In 2000, the Glacier Studies Project (GSP) of the U.S. Geological Survey (USGS) and the Mapping and Geographic Information Centre (MAGIC) of the British Antarctic Survey (BAS) began a formal cooperative 3-year endeavor to prepare three maps of the Antarctic Peninsula region. The maps will be based on a large variety of cartographic, aerial photograph, satellite image, and ancillary historical datasets archived at each institution. The maps will document dynamic changes on the peninsula during the past 50 years. The three maps are part of a planned 24-map series (I-2600) being published by the USGS in both paper and digital format (see USGS Fact Sheet FS-050-98 at http://pubs.usgs.gov/factsheet/fs50-98/); the maps are of the Trinity Peninsula area (I-2600-A), the Larsen Ice Shelf area (I-2600-B), and the Palmer Land area (I-2600-C). The 1:1,000,000-scale maps will encompass an area 1,800 kilometers (km) long and with an average width of 400 km (range of 200 to 600 km wide); the area is between lats 60? and 76? S. and longs 52? and 80? W. Each of the three maps will include an interpretive booklet that analyzes documented historical changes in the fronts of the ice shelves and termini of the outlet glaciers.

Fact Sheet↗

USGS2000

Revision of Primary Series Maps

In 1992, the U.S. Geological Survey (USGS) completed a 50-year effort to provide primary series map coverage of the United States. Many of these maps now need to be updated to reflect the construction of new roads and highways and other changes that have taken place over time. The USGS has formulated a graphic revision plan to help keep the primary series maps current. Primary series maps include 1:20,000-scale quadrangles of Puerto Rico, 1:24,000- or 1:25,000-scale quadrangles of the conterminous United States, Hawaii, and U.S. Territories, and 1:63,360-scale quadrangles of Alaska. The revision of primary series maps from new collection sources is accomplished using a variety of processes. The raster revision process combines the scanned content of paper maps with raster updating technologies. The vector revision process involves the automated plotting of updated vector files. Traditional processes use analog stereoplotters and manual scribing instruments on specially coated map separates. The ability to select from or combine these processes increases the efficiency of the National Mapping Division map revision program.

Fact Sheet↗

USGS2008

WaterWatch — Maps, graphs, and tables of current, recent, and past streamflow conditions

WaterWatch (http://water.usgs.gov/waterwatch/) is a U.S. Geological Survey (USGS) World Wide Web site that displays maps, graphs, and tables describing real-time, recent, and past streamflow conditions for the United States. The real-time information generally is updated on an hourly basis. WaterWatch provides streamgage-based maps that show the location of more than 3,000 long-term (30 years or more) USGS streamgages; use colors to represent streamflow conditions compared to historical streamflow; feature a point-and-click interface allowing users to retrieve graphs of stream stage (water elevation) and flow; and highlight locations where extreme hydrologic events, such as floods and droughts, are occurring. The streamgage-based maps show streamflow conditions for real-time, average daily, and 7-day average streamflow. The real-time streamflow maps highlight flood and high flow conditions. The 7-day average streamflow maps highlight below-normal and drought conditions. WaterWatch also provides hydrologic unit code (HUC) maps. HUC-based maps are derived from the streamgage-based maps and illustrate streamflow conditions in hydrologic regions. These maps show average streamflow conditions for 1-, 7-, 14-, and 28-day periods, and for monthly average streamflow; highlight regions of low flow or hydrologic drought; and provide historical runoff and streamflow conditions beginning in 1901. WaterWatch summarizes streamflow conditions in a region (state or hydrologic unit) in terms of the long-term typical condition at streamgages in the region. Summary tables are provided along with time-series plots that depict variations through time. WaterWatch also includes tables of current streamflow information and locations of flooding.

Fact Sheet↗

USGS2017

Historical Topographic Map Collection bookmark

The U.S. Geological Survey (USGS) National Geospatial Program is scanning published USGS 1:250,000-scale and larger topographic maps printed between 1884, the inception of the topographic mapping program, and 2006. The goal of this project, which began publishing the historical scanned maps in 2011, is to provide a digital repository of USGS topographic maps, available to the public at no cost. For more than 125 years, USGS topographic maps have accurately portrayed the complex geography of the Nation. The USGS is the Nation’s largest producer of printed topographic maps, and prior to 2006, USGS topographic maps were created using traditional cartographic methods and printed using a lithographic printing process. As the USGS continues the release of a new generation of topographic maps (US Topo) in electronic form, the topographic map remains an indispensable tool for government, science, industry, land management planning, and leisure.

General Information Product↗

USGS1993

Geologic map of the Palo Alto and part of the Redwood Point 7-1/2' quadrangles, San Mateo and Santa Clara Counties, California

The Palo Alto and southern part of the Redwood Point 7-1/2' quadrangles cover an area on the San Francisco peninsula between San Francisco Bay and the Santa Cruz Mountains. San Francisquito and Los Trancos Creeks, in the southeastern part of the map area, form the boundary between San Mateo and Santa Clara Counties. The area covered by the geologic map extends from tidal and marsh lands at the edge of the bay southward across a gently sloping alluvial plain to the foothills of the northern Santa Cruz Mountains. The foothills are separated from the main mass of the mountains by two northwest-striking faults, the San Andreas and Pilarcitos, that cross the southwest corner of the map area (fig. 1). The map and adjoining areas are here divided into three structural blocks juxtaposed along these faults, adopting the scheme of Nilsen and Brabb (1979): (1) the San Francisco Bay block lying east of the San Andreas Fault Zone; (2) the Pilarcitos block lying between the San Andreas and Pilarcitos Faults; and (3) the La Honda block that includes the main mass of the Santa Cruz Mountains lying west of the Pilarcitos Fault. The west boundary of the La Honda block is the Seal Cove-San Gregorio Fault. Pre-late Pleistocene Cenozoic rocks of the foothills have been compressed into northwest-striking folds, which have been overridden by Mesozoic rocks along southwest-dipping low-angle faults. Coarse- to fine-grained upper Pleistocene and Holocene alluvial and estuarine deposits, eroded from the foothills and composing the alluvial plain, are essentially undeformed. Most of the alluvial plain, including some parts of the marsh land that borders the bay, has been covered by residential and commercial developments, and virtually all of the remaining marsh land has been diked off and used as salt evaporating ponds. The map area includes parts of the municipalities of San Carlos, Redwood City, Atherton, Woodside, Portola Valley, Menlo Park, and East Palo Alto in San Mateo County; and Palo Alto, Stanford University, Los Altos, and Los Altos Hills in Santa Clara County (fig. 2). Much of the university land remains as undeveloped open space surrounded by densely urbanized lands. Geologic maps of all or part of the present map area have been prepared previously by Branner and others (1909), Thomas (1949), Dobbs and Forbes (1960), Dibblee (1966), Page and Tabor (1967), Pampeyan (1970a, 1970b), Beaulieu (1970), Helley and others (1979), and by numerous Stanford University students working on topical earth science problems. In addition, numerous engineering geologic studies have been conducted for site investigations relating to residential and commercial developments and, in particular, for construction of the Stanford Linear Accelerator Center (SLAC). The reports pertaining to SLAC are summarized in Skjei and others (1965) and more recently in a report by Earth Sciences Associates (1983). The interested reader is referred to Brabb and Pampeyan (1983), Brabb and others (1982), Wentworth and others (1985), Wieczorek and others (1985), Thomson and Evernden (1986), Brabb and Olson (1986), Youd and Perkins (1987), Perkins (1987), and Mark and Newman (1988) for information pertaining to geology, history, slope stability, seismic shaking, liquifaction potential, and faulting and seismicity in San Mateo County, some of which can be applied directly to northern Santa Clara County. Field work for the present geologic map was done in 1962-1964 and 1966 when SLAC and Interstate 280 were in early stages of construction. Only minor additions and revisions have been made since this mapping was first released (Pampeyan, 1970a; 1970b) as it was impractical to keep pace with accelerating urban development of the area. Geologic units of the flatlands area are largely adapted from Helley and Lajoie (1979).

California↗

USGS2003

Geologic map of MTM -45252 and-45257 quadrangles, Reull Vallis region of Mars

Mars Transverse Mercator (MTM) quadrangles -45252 and -45257 (latitude 42.5° S. to 47.5°S., longitude 250° W. to 260° W.) cover a portion of the highlands of Promethei Terra east of Hellas basin. The map area consists of heavily cratered ancient highland materials having moderate to high relief, isolated knobs and massifs of rugged mountainous material, and extensive tracts of smooth and channeled plains. Part of the ~1,500-km-long Reull Vallis outflow system is within the map area. The area also contains surficial deposits, such as the prominent large debris aprons that commonly surround highland massifs. Regional slopes are to the west, toward the Hellas basin, as indicated by topographic maps of Mars. Approximately 60 percent of the surface of Mars is covered by rugged, heavily cratered terrains believed to represent the effects of heavy bombardment in the inner solar system about 4.0 billion years ago. Much of this terrain, including that within the map area, records a long history of modification by tectonism, fluvial processes, mass wasting, and eolian activity. The presence of fluvial features to the east of Hellas basin, including Reull Vallis and other smaller channels, has significant implications for past environmental conditions. The degraded terrains surrounding Hellas basin provide constraints on the role and timing of volatile-driven activity in the evolution of the highlands. Current photogeologic mapping at 1:500,000 scale (see also Mest and Crown, 2002) from analysis of Viking Orbiter images complements previous geomorphic studies of Reull Vallis and other highland outflow systems, drainage networks, and highland debris aprons, as well as regional geologic mapping studies and geologic mapping of Hellas basin as a whole at 1:5,000,000 scale. Viking Orbiter image coverage of the map area generally ranges from 160 to 220 m/pixel; the central part of the map area is covered by higher resolution images of about 47 m/pixel. Crater size-frequency distributions have been compiled to constrain the relative ages of geologic units and determine the timing and duration of inferred geologic processes.

IMAP↗

USGS1978

Geologic map of the Boulder-Fort Collins-Greeley area, Colorado

This digital map shows the geographic extent of rock stratigraphic units (formations) as compiled by Colton in 1976 under the Front Range Urban Corridor Geology Program. Colton used his own geologic mapping and previously published geologic maps to compile one map having a single classification of geologic units. The resulting published color paper map (USGS Map I-855-G, Colton, 1978) was intended for land-use planning and to depict the regional geology. In 1997-1999, another USGS project designed to address urban growth issues was undertaken. This project, the USGS Front Range Infrastructure Resources Project, undertook to digitize Colton's map at 1:100,000 scale, making it useable in Geographical Information Systems (GIS). That product is described here. In general, the digitized map depicts in its western part Precambrian igneous and metamorphic rocks, Pennsylvanian and younger sedimentary rock units, major faults, and brecciated zones along an eastern strip (5-20 km wide) of the Front Range. The central and eastern parts of the map (Colorado Piedmont) show a mantle of Quaternary unconsolidated deposits and interspersed outcrops of sedimentary rock of Cretaceous or Tertiary age. A surficial mantle of unconsolidated deposits of Quaternary age is differentiated and depicted as eolium (wind-blown sand and silt), alluvium (river gravel, sand, and silt of variable composition), colluvium, and a few landslide deposits. At the mountain front, north-trending, Paleozoic and Mesozoic formations of sandstone, shale, and minor limestone dip mostly eastward and form folds, fault blocks, hogbacks and intervening valleys. Local dikes and sills of Tertiary rhyodacite and basalt intrude rocks near the range front, mostly in the Boulder area.

Colorado↗

USGS2002

Geologic map and digital database of the Pinto Mountain 7.5 minute quadrangle, Riverside County, California

The geologic map and digital database of the Pinto Mountain quadrangle are products of a regional geologic mapping effort undertaken in the eastern Transverse Ranges in and around Joshua Tree National Park. This investigation, part of the Southern California Areal Mapping Project (SCAMP), is conducted in cooperation with the California Geologic Survey and the National Park Service. In line with the goals of the National Cooperative Geologic Mapping Program (NCGMP), mapping of the Pinto Mountain and other quadrangles has been directed toward generating a multipurpose digital geologic map database that is applicable to land-related investigations in the earth and biological sciences. This mapping is conducted to further understanding of bedrock geology and surficial processes in the region and to document evidence for seismotectonic activity in the eastern Transverse Ranges. It is also intended to serve as a base layer suitable for ecosystem and mineral resource assessment and for building a hydrogeologic framework for Pinto Basin. Initial investigations span Pinto Basin from the Hexie and Eagle Mountains northward into the Pinto Mountains. Quadrangles mapped include the Conejo Well 7.5-minute quadrangle (Powell, 2001a), the Porcupine Wash 7.5-minute quadrangle (Powell, 2001b), the Pinto Mountain 7.5-minute quadrangle, and the San Bernardino Wash 7.5-minute quadrangle (Powell, 2002). Parts of the Pinto Mountain quadrangle had been mapped previously at a variety of scales (Weir, and Bader, 1963; Hope, 1966, 1969; Jennings, 1967; Powell, 1981, 1993).

California↗

USGS2002

Geologic map and digital database of the San Bernardino Wash 7.5 minute quadrangle, Riverside County, California

The geologic map and digital database of the San Bernardino Wash quadrangle are products of a regional geologic mapping effort undertaken in the eastern Transverse Ranges in and around Joshua Tree National Park. This investigation, part of the Southern California Areal Mapping Project (SCAMP), is conducted in cooperation with the California Geologic Survey and the National Park Service. In line with the goals of the National Cooperative Geologic Mapping Program (NCGMP), mapping of the San Bernardino Wash and other quadrangles has been directed toward generating a multipurpose digital geologic map database that is applicable to land-related investigations in the earth and biological sciences. This mapping is conducted to further understanding of bedrock geology and surficial processes in the region and to document evidence for seismotectonic activity in the eastern Transverse Ranges. It is also intended to serve as a base layer suitable for ecosystem and mineral resource assessment and for building a hydrogeologic framework for Pinto Basin. Initial investigations span Pinto Basin from the Hexie and Eagle Mountains northward into the Pinto Mountains (see fig. 1). Quadrangles mapped include the Conejo Well 7.5-minute quadrangle (Powell, 2001a), the Porcupine Wash 7.5-minute quadrangle (Powell, 2001b), the Pinto Mountain 7.5-minute quadrangle (Powell, 2002), and the San Bernardino Wash 7.5-minute quadrangle. Parts of the San Bernardino Wash quadrangle had been mapped previously at a variety of scales (Weir, and Bader, 1963; Hope, 1966, 1969; Jennings, 1967; Powell, 1981, 1993).

California↗

USGS2000

Digital mapping techniques '00, workshop proceedings - May 17-20, 2000, Lexington, Kentucky

Introduction: The Digital Mapping Techniques '00 (DMT'00) workshop was attended by 99 technical experts from 42 agencies, universities, and private companies, including representatives from 28 state geological surveys (see Appendix A). This workshop was similar in nature to the first three meetings, held in June, 1997, in Lawrence, Kansas (Soller, 1997), in May, 1998, in Champaign, Illinois (Soller, 1998a), and in May, 1999, in Madison, Wisconsin (Soller, 1999). This year's meeting was hosted by the Kentucky Geological Survey, from May 17 to 20, 2000, on the University of Kentucky campus in Lexington. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. When, based on discussions at the workshop, an attendee adopts or modifies a newly learned technique, the workshop clearly has met that objective. Evidence of learning and cooperation among participating agencies continued to be a highlight of the DMT workshops (see example in Soller, 1998b, and various papers in this volume). The meeting's general goal was to help move the state geological surveys and the USGS toward development of more cost-effective, flexible, and useful systems for digital mapping and geographic information systems (GIS) analysis. Through oral and poster presentations and special discussion sessions, emphasis was given to: 1) methods for creating and publishing map products (here, 'publishing' includes Web-based release); 2) continued development of the National Geologic Map Database; 3) progress toward building a standard geologic map data model; 4) field data-collection systems; and 5) map citation and authorship guidelines. Four representatives of the GIS hardware and software vendor community were invited to participate. The four annual DMT workshops were coordinated by the AASG/USGS Data Capture Working Group, which was formed in August, 1996, to support the Association of American State Geologists and the USGS in their effort to build a National Geologic Map Database (see Soller and Berg, this volume, and http://ncgmp.usgs.gov/ngmdbproject/standards/datacapt/). The Working Group was formed because increased production efficiencies, standardization, and quality of digital map products were needed to help the Database, and the State and Federal geological surveys, provide more high-quality digital maps to the public.

Open-File Report↗

USGS2002

Preliminary geologic map of the Santa Barbara coastal plain area, Santa Barbara County, California

This report presents a new geologic digital map of the Santa Barbara coastal plain area at a compilation scale of 1:24,000 (one inch on the map = 2,000 feet on the ground) and with a horizontal positional accuracy of at least 20 m. This preliminary map depicts the distribution of bedrock units and surficial deposits and associated deformation underlying and adjacent to the coastal plain within the contiguous Santa Barbara and Goleta 7.5' quadrangles. A planned second version will extend the mapping westward into the adjoining Dos Pueblos Canyon quadrangle and eastward into the Carpinteria quadrangle. The mapping presented here results from the collaborative efforts of geologists with the U.S. Geological Survey Southern California Areal Mapping Project (SCAMP) (Minor, Kellogg, Stanley, Stone, and Powell) and the tectonic geomorphology research group at the University of California at Santa Barbara (Gurrola and Selting). C.L. Powell, II, performed all new fossil identifications and interpretations reported herein. T.R. Brandt designed and edited the GIS database,performed GIS database integration and created the digital cartography for the map layout. The Santa Barbara coastal plain is located in the western Transverse Ranges physiographic province along a west-trending segment of the southern California coastline about 100 km (62 mi) northwest of Los Angeles. The coastal plain region, which extends from the Santa Ynez Mountains on the north to the Santa Barbara Channel on the south, is underlain by numerous active and potentially active folds and partly buried thrust faults of the Santa Barbara fold and fault belt. Strong earthquakes that occurred in the region in 1925 (6.8 magnitude) and 1978 (5.1 magnitude) are evidence that such structures pose a significant earthquake hazard to the approximately 200,000 people living within the major coastal population centers of Santa Barbara and Goleta. Also, young landslide deposits along the steep lower flank of the Santa Ynez Mountains indicate the potential for continued slope failures and mass movements that may threaten urbanized parts of the coastal plain. Deformed sedimentary rocks in the subsurface of the coastal plain and the adjacent Santa Barbara Channel contain deposits of oil and gas, some of which are currently being extracted. Shallow, localized sedimentary aquifers underlying the coastal plain provide limited amounts of water for the urban areas, but the quality of some of this groundwater is compromised by coastal salt-water contamination. The present map compilation provides a set of uniform geologic digital coverages that can be used for analysis and prediction of these and other geologic hazards and resources in the coastal plain region. In the map area the oldest stratigraphic units consist of resistant Eocene to Oligocene marine and terrestrial sedimentary rocks that form a mostly southward-dipping and laterally continuous sequence along the south flank of the Santa Ynez Mountains. Less resistant, but more variably deformed, Miocene, Pliocene, and Pleistocene marine sedimentary rocks and deposits are exposed in the lower Santa Ynez foothills and in the coastal hills and sea cliffs farther south. Pleistocene and Holocene surficial alluvial, colluvial, estuarine, and marine-terrace deposits directly underlie much of the low-lying coastal plain area, and similar-aged alluvial and landslide deposits locally mantle the lower flanks of the Santa Ynez Mountains. Structurally, the Santa Barbara coastal plain area is dominated by the Santa Barbara fold and fault belt, an east-west-trending zone of Quaternary, partly active folds and blind and exposed reverse and thrust faults. The dominant trend of individual structures within the belt is west-northwest -- slightly oblique to the overall trend of the fold and fault belt. A conspicuous exception, however, is the More Ranch fault system, which strikes east-northeast across the fold and f

Open-File Report↗

USGS2003

Spatial digital database for the geologic map of Oregon

Introduction This report describes and makes available a geologic digital spatial database (orgeo) representing the geologic map of Oregon (Walker and MacLeod, 1991). The original paper publication was printed as a single map sheet at a scale of 1:500,000, accompanied by a second sheet containing map unit descriptions and ancillary data. A digital version of the Walker and MacLeod (1991) map was included in Raines and others (1996). The dataset provided by this open-file report supersedes the earlier published digital version (Raines and others, 1996). This digital spatial database is one of many being created by the U.S. Geological Survey as an ongoing effort to provide geologic information for use in spatial analysis in a geographic information system (GIS). This database can be queried in many ways to produce a variety of geologic maps. This database is not meant to be used or displayed at any scale larger than 1:500,000 (for example, 1:100,000). This report describes the methods used to convert the geologic map data into a digital format, describes the ArcInfo GIS file structures and relationships, and explains how to download the digital files from the U.S. Geological Survey public access World Wide Web site on the Internet. Scanned images of the printed map (Walker and MacLeod, 1991), their correlation of map units, and their explanation of map symbols are also available for download.

Oregon↗

USGS2004

Bedrock geologic map of the Port Wing, Solon Springs, and parts of the Duluth and Sandstone 30' X 60' quadrangles, Wisconsin

This Open-File Report provides digital data (shapefiles and .e00 files) for the bedrock geology in the Port Wing, Solon Springs, and parts of the Duluth and Sandstone quadrangles in Wisconsin. A Miscellaneous Investigations Series map (I map) is currently in review with analogous data in paper format. This map portrays the geology of part of the Midcontinent rift system (MRS) along the southern extension of the Lake Superior syncline in northern Wisconsin. The map area contains the St. Croix horst, a rift graben filled with Mesoproterozoic rocks of the Keweenawan Supergroup that was subsequently inverted. The horst exposes about 15 - 20 km of strata that record the opening of the Midcontinent rift, its subsequent transition to a thermal subsidence basin, and eventual inversion. About 3 km of underlying Mesoproterozoic strata, including the Gogebic iron range, and about 10 km of Neoarchean rocks, exposed in the southernmost part of the map area lie to the southeast of the horst. The nearly flat-lying continental red beds of the Oronto and Bayfield Groups, the youngest strata of the Keweenawan Supergroup, overlie the volcanic rocks. A wealth of geologic data exists for the area as a result of many individual studies over the last hundred years, but much has remained unpublished in theses, dissertations, and other reports of limited availability. This map has incorporated most of that data (see list of data sources) and includes results of our investigations conducted from 1992 to 2000. Our studies were designed to fill gaps in existing data and reconcile conflicting interpretations on some aspects of the geology of the region. The purpose of this map is to complete digital coverage of quadrangles with significant exposure of rocks of the Midcontinent rift in Wisconsin and Michigan at a scale of 1:100,000. Other maps in this series include the bedrock geologic maps of the Ontonagon-Wakefield, the Ashland-Ironwood, and the Keweenaw Peninsula areas (USGS Open-File Reports 01-088 , 99-546 , and 99-149 , respectively).

Open-File Report↗