Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research B: Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources
USGS1997

Seismic reflection images beneath Puget Sound, western Washington State: The Puget Lowland thrust sheet hypothesis

Seismic reflection data show that the densely populated Puget Lowland of western Washington state is underlain by subhorizontal Paleogene and Neogene sedimentary rocks deformed by west and northwest trending faults and folds. From south to north beneath the Lowland, features seen on the seismic data include: the horizontally-stratified, 3.5 km thick Tacoma sedimentary basin; the Seattle uplift with south dipping (∼20°) strata on its south flank and steeply (50° to 90°) north dipping strata and the west-trending Seattle fault on its north flank; the 7.5 km thick, northward-thinning Seattle sedimentary basin; the antiformal Kingston arch; and the northwest trending, transpressional Southern Whidbey Island fault zone (SWIF). Interpreting the uplifts as fault-bend and fault-propagation folds leads to the hypothesis that the Puget Lowland lies on a north directed thrust sheet. The base of the thrust sheet may lie at 14 to 20 km depth within or at the base of a thick block of basaltic Crescent Formation; its edges may be right-lateral strike-slip faults along the base of the Cascade Range on the east and the Olympic Mountains on the west. Our model suggests that the Seattle fault has a long-term slip rate of about 0.25 mm/year and is large enough to generate a M 7.6 to 7.7 earthquake.

Washington↗
USGS1997

Chemical and isotopic evidence of gas-influenced flow at a transform plate boundary: Monterey Bay, California

Chemical and isotopic compositions of pore fluids document upward flow through communities of vesicomyid clams in Monterey Bay, California. Within the clam communities, the sulfate reduction zone is only 10 cm thick, and Ca and Mg concentrations decrease to values as low as 2.2 m M and 34.5 m M , respectively, at depths less than 30 cm below the sediment-water interface. Less than 5 m outside the communities, the base of the sulfate reduction zone is deeper than the greatest penetration of the cores (∼30 cm), and Ca and Mg exhibit only minor changes from seawater values. The sediment exhibits no significant variation in grain size, mineralogy, organic carbon, nitrogen, or carbonate content throughout the region. The composition of pore fluid within clam communities results from upward flow of altered fluid rather than different diagenetic reactions within and outside the communities. Isotopically light dissolved inorganic carbon (DIC), with δ 13 C values ranging from −3.2 to −54.1‰, could reflect carbon sources from either oxidized thermogenic methane and/or a mixture of oxidized microbial methane and solid organic carbon. The C 1 /(C 2 +C 3 ) ratios (ranging from 34 to 1142) and the hydrogen and carbon isotopic compositions of methane (δD values of −109 to −156‰; δ 13 C values of −30.6 to −86.6‰) suggest that methane is primarily microbial but that a minor component could be thermally generated. Any thermogenic methane would have migrated from great depths, possibly >2 km. The presence of methane is likely to contribute to fluid flow by reducing the density of the fluids. Past fluid migration and venting are reflected by widespread carbonate mineralization at the sediment-water interface. This mineralization and the geographic distribution and proportions of microbial and thermogenic methane suggest that vent sites migrate when permeability is reduced during carbonate cementation. These results demonstrate that along with convergent and divergent plate boundaries, transform plate boundaries are characterized by fluid flow and that the flow may be widespread, occurring at sites away from fault zones.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Ductile shear zones beneath strike-slip faults: Implications for the thermomechanics of the San Andreas fault zone

We have carried out two-dimensional (2-D) numerical experiments on the bulk flow of a layer of fluid that is driven in a strike-slip sense by constant velocities applied at its boundaries. The fluid has the (linearized) conventional rheology assumed to apply to lower crust/upper mantle rocks. The temperature dependence of the effective viscosity of the fluid and the shear heating that accompanies deformation have been incorporated into the calculations, as has thermal conduction in an overlying crustal layer. Two end-member boundary conditions have been considered, corresponding to a strong upper crust driving a weaker ductile substrate and a strong ductile layer driving a passive, weak crust. In many cases of practical interest, shear heating is concentrated close to the axial plane of the shear zone for either boundary condition. For these cases, the resulting steady state temperature field is well approximated by a cylindrical heat source embedded in a conductive half-space at a depth corresponding to the top of the fluid layer. This approximation, along with the application of a theoretical result for one-dimensional shear zones, permits us to obtain simple analytical approximations to the thermal effects of 2-D ductile shear zones for a range of assumed rheologies and crustal geotherms, making complex numerical calculations unnecessary. Results are compared with observable effects on heat flux near the San Andreas fault using constraints on the slip distribution across the entire fault system. Ductile shearing in the lower crust or upper mantle can explain the observed increase in surface heat flux southeast of the Mendocino triple junction and match the amplitude of the regional heat flux anomaly in the California Coast Ranges. Because ductile dissipation depends only weakly on slip rate, faults moving only a few millimeters per year can be important heat sources, and the superposition of effects of localized ductile shearing on both currently active and now inactive strands of the San Andreas system can explain the breadth of the heat flux anomaly across central California.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Stratigraphic contrasts and tectonic relationships between Carboniferous successions in the Trans-Alaska Crustal Transect corridor and adjacent areas, northern Alaska

The Carboniferous succession along the Trans-Alaska Crustal Transect (TACT) corridor in the Atigun Gorge area of the central Brooks Range consists of the Kayak Shale (Kinderhookian) and the Lisburne Group (Kinderhookian through Chesterian). The Kayak Shale is at least 210 m thick; it is chiefly black, noncalcareous shale with several limestone beds of pelmatozoan-bryozoan packstone and formed in an open-marine setting. The Lisburne Group is a carbonate rock succession about 650 m thick and consists mainly of skeletal packstone, wackestone, and milestone which contain locally abundant calcispheres, ostracodes, algae, and sponge spicules; it accumulated largely in a shallow water platform environment with restricted circulation. This restriction was probably produced by a coeval belt of skeletal sand shoals recognized 70 km to the west in the Shainin Lake area. Significant and apparently abrupt shifts in the age and lithofacies of Carboniferous strata occur across the central and eastern Brooks Range. These shifts are most marked in a zone roughly coincident with what is interpreted by many workers to be the leading edge of the Endicott Mountains allochthon. Notable lithologie contrasts are also observed, however, between sections in the northern and southern parts of the Endicott Mountains allochthon. This suggests that considerable tectonic shortening has taken place within the allochthon, as well as between it and parautochthonous rocks to the northeast. The Carboniferous section near Mount Doonerak is more similar in age and lithofacies to coeval sections in the central Brooks Range that are considered allochthonous than to parautochthonous sections to the northeast.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Effects of slip, slip rate, and shear heating on the friction of granite

The stability of fault slip is sensitive to the way in which frictional strength responds to changes in slip rate and in particular to the effective velocity dependence of steady state friction Δμ ss /Δ ln V . This quantity can vary substantially with displacement, temperature and slip rate. To investigate the physical basis for this behavior and the possible influence of shear heating, we slid initially bare granite surfaces in unconfined rotary shear to displacements of hundreds of millimeters at normal stresses, σ n of 10 and 25 MPa and at room temperature. We imposed step changes in slip rate within the range 10 −2 to 10 3.5 μm/s and also monitored frictional heating with thermistors embedded in the granite. The transient response of μ to slip rate steps was fit to a rate- and state-dependent friction law using two state variables to estimate the values of several parameters in the constitutive law. The first 20 mm of slip shows rising friction and falling Δμ ss /Δ ln V ; further slip shows roughly constant friction, Δμ ss /Δ ln V and parameter values, suggesting that a steady state condition is reached on the fault surface. At V ≤ 10 μm/s, Δμ ss /Δ ln V = −0.004 ± 0.001. At higher rates the response is sensitive to normal stress: At σ n = 25 MPa granite shows a transition to effective velocity strengthening (Δμ ss /Δ ln V = 0.008 ± 0.004) at the highest slip rates tested. At 10 MPa granite shows a less dramatic change to Δμ ss /Δ ln V ≈ 0 at the highest rates. The maximum temperature measured in the granite is ∼60°C at 25 MPa and 10 3.5 μm/s. Temperatures are in general agreement with a numerical model of heat conduction which assumes spatially homogeneous frictional heating over the sliding surface. The simplest interpretation of our measurements of Δμ ss /Δ ln V is that the granite is inherently velocity weakening (∂μ ss /∂ ln V < 0) and temperature strengthening (∂μ ss /∂ T −1 < 0) at all velocities. At high slip rates the response of μ to changes in temperature from shear heating may outweigh the response to changing velocity, such that the net effect Δμ ss /Δ ln V > 0 mimics velocity strengthening. These results have implications for the frictional behavior of faults during earthquakes. High slip rates may cause a switch to effective velocity strengthening which could limit peak coseismic slip rate and stress drop. For fluid-saturated faults, strengthening by this mechanism may be partly or fully offset by weakening due to thermal pressurization of a poorly drained pore fluid.

Journal of Geophysical Research B: Solid Earth↗
USGS1997

Uplift of the Transantarctic Mountains and the bedrock beneath the East Antarctic ice sheet

In recent years the Transantarctic Mountains (TAM), the largest noncontractional mountain belt in the world, have become the focus of modelers who explained their uplift by a variety of isostatic and thermal mechanisms. A problem with these models is a lack of available data to compare with model predictions. We report here the results of a 312-km-long geophysical traverse conducted in 1993/1994 in the hinterland of the TAM. Using detailed subglacial topography and gravity measurements, we confirm the origin of the TAM as a flexural uplift of the edge of East Antarctica. Using an elastic model with a free edge, we can jointly fit the topography and the gravity with a plate having an elastic thickness of 85±15 km and a preuplift elevation of 700±50 m for East Antarctica. Using a variety of evidence, we argue that the uplift is coincident with a relatively minor tectonic event of transtensional motion between East and West Antarctica during the Eocene rather than the Late Cretaceous rifting event that created the Ross Embayment. We suggest that this transtensional motion caused the continuous plate to break, which created an escarpment that significantly increased the rates of erosion and exhumation. Results from the geophysical traverse also extend our knowledge of the bedrock geology from the exposures within the TAM to the ice covered interior. Our interpretation suggests that the Ferrar flood basalts extend at least 100 km westward under the ice. The Beacon Supergroup of Paleozoic and Mesozoic sediments thins gradually under the ice and its reconstructed thickness is reminiscent of profiles of foreland basins. Finally, there is no indication in the gravity field for an incomplete rebound due to significant melting of the East Antarctic ice sheet since the last glacial period.

Journal of Geophysical Research B: Solid Earth↗
USGS1997

Stressing of the New Madrid seismic zone by a lower crust detachment fault

A new mechanical model for the cause of the New Madrid seismic zone in the central United States is analyzed. The model contains a subhorizontal detachment fault which is assumed to be near the domed top surface of locally thickened anomalous lower crust (“rift pillow”). Regional horizontal compression induces slip on the fault, and the slip creates a stress concentration in the upper crust above the rift pillow dome. In the coseismic stage of the model earthquake cycle, where the three largest magnitude 7–8 earthquakes in 1811–1812 are represented by a single model mainshock on a vertical northeast trending fault, the model mainshock has a moment equivalent to a magnitude 8 event. During the interseismic stage, corresponding to the present time, slip on the detachment fault exerts a right-lateral shear stress on the locked vertical fault whose failure produces the model mainshock. The sense of shear is generally consistent with the overall sense of slip of 1811–1812 and later earthquakes. Predicted rates of horizontal strain at the ground surface are about 10 −7 year −1 and are comparable to some observed rates. The model implies that rift pillow geometry is a significant influence on the maximum possible earthquake magnitude.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Paleomagnetism, paleogeographic origins, and uplift history of the Coast Range ophiolite at Mount Diablo, California

Divergent paleogeographic origins have been proposed for the Coast Range ophiolite of western California which are testable using paleomagnetic methods. Paleomagnetic data for Middle Jurassic pillow lavas and diabase sills of the Coast Range ophiolite at Mount Diablo, northern California, indicate that they contain two components of remanent magnetization. The characteristic directions have normal and reversed polarities and apparently are carried by Ti-poor magnetite. This magnetization is inferred to have been acquired during emplacement and seafloor alteration at an ancient spreading ridge. The paleolatitude calculated from its structurally corrected mean direction is 20°N ± 9° and agrees with the expected direction for stable North America; this result is also consistent with the concordant paleolatitude (32°N ± 8°) recently determined for Upper Jurassic Coast Range ophiolite at Stanley Mountain in southern California. In addition, clockwise vertical axis rotation of Mount Diablo (143° ± 11°) is indicated by the characteristic magnetization direction. An overprint component is inferred to have been acquired during uplift of Mount Diablo since the Miocene.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

A generalized law for brittle deformation of Westerly granite

A semiempirical constitutive law is presented for the brittle deformation of intact Westerly granite. The law can be extended to larger displacements, dominated by localized deformation, by including a displacement-weakening break-down region terminating in a frictional sliding regime often described by a rate- and state-dependent constitutive law. The intact deformation law, based on an Arrhenius type rate equation, relates inelastic strain rate to confining pressure P c , differential stress σ Δ , inelastic strain ε i and temperature T . The basic form of the law for deformation prior to fault nucleation is where σ o and ε o are normalization constants (dependent on confining pressure), a is rate sensitivity of stress, and α is a shape parameter. At room temperature, eight experimentally determined coefficients are needed to fully describe the stress-strain-strain rate response for Westerly granite from initial loading to failure. Temperature dependence requires apparent activation energy ( E * ∼ 90 kJ/mol) and one additional experimentally determined coefficient. The similarity between the prefailure constitutive law for intact rock and the rate- and state-dependent friction laws for frictional sliding on fracture surfaces suggests a close connection between these brittle phenomena.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Detrital zircon U-Pb geochronology of Cambrian to Triassic miogeoclinal and eugeoclinal strata of Sonora, Mexico

One hundred and eighty two individual detrital zircon grains from Cambrian through Permian miogeoclinal strata, Ordovician eugeoclinal rocks, and Triassic post-orogenic sediments in northwestern Sonora have been analyzed. During Cambrian, Devonian, Permian, and Triassic time, most zircons accumulating along this part of the Cordilleran margin were shed from 1.40–1.45 and 1.62–1.78 Ga igneous rocks that are widespread in the southwestern United States and northwestern Mexico. Zircons with ages of approximately 1.11 Ga are common in Cambrian strata and were apparently shed from granite bodies near the sample site. The sources of 225–280 Ma zircons in our Triassic sample are more problematic, as few igneous rocks of these ages are recognized in northwestern Mexico. Such sources may be present but unrecognized, or the grains could have been derived from igneous rocks of the appropriate ages to the northwest in the Mojave Desert region, to the east in Chihuahua and Coahuila, or to the south in accreted(?) arc-type terranes. Because the zircon grains in our Cambrian and Devonian to Triassic samples could have accumulated in proximity to basement rocks near their present position or in the Death Valley region of southern California, our data do not support or refute the existence of the Mojave-Sonora megashear. Ordovician strata of both miogeoclinal and eugeoclinal affinity are dominated by >1.77 Ga detrital zircons, which are considerably older than most basement rocks in the region. Zircon grains in the miogeoclinal sample were apparently derived from the Peace River arch area of northwestern Canada and transported southward by longshore currents. The eugeoclinal grains may also have come from the Peace River arch region, with southward transport by either sedimentary or tectonic processes, or they may have been shed from off-shelf slivers of continents (perhaps Antarctica?) removed from the Cordilleran margin during Neoproterozoic rifting. It is also possible that the Ordovician eugeoclinal strata are far traveled and exotic to North America.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Observations on basaltic lava streams in tubes from Kilauea Volcano, island of Hawai'i

From 1986 to 1997, the Pu'u 'O'o-Kupaianaha eruption of Kilauea produced a vast pahoehoe flow field fed by lava tubes that extended 10–12 km from vents on the volcano's east rift zone to the ocean. Within a kilometer of the vent, tubes were as much as 20 m high and 10–25 m wide. On steep slopes (4–10°) a little farther away from the vent, some tubes formed by roofing over of lava channels. Lava streams were typically 1–2 m deep flowing within a tube that here was typically 5 m high and 3 m wide. On the coastal plain (<1°), tubes within inflated sheet flows were completely filled, typically 1–2 m high, and several tens of meters wide. Tubes develop as a flow's crust grows on the top, bottom, and sides of the tubes, restricting the size of the fluid core. The tubes start out with nearly elliptical cross-sectional shapes, many times wider than high. Broad, flat sheet flows evolve into elongate tumuli with an axial crack as the flanks of the original flow were progressively buried by breakouts. Temperature measurements and the presence of stalactites in active tubes confirmed that the tube walls were above the solidus and subject to melting. Sometimes, the tubes began downcutting. Progressive downcutting was frequently observed through skylights; a rate of 10 cm/d was measured at one skylight for nearly 2 months.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Viscoelastic coupling model of the San Andreas fault along the Big Bend, southern California

The big bend segment of the San Andreas fault is the 300-km-long segment in southern California that strikes about N65°W, roughly 25° counterclockwise from the local tangent to the small circle about the Pacific-North America pole of rotation. The broad distribution of deformation of trilateration networks along this segment implies a locking depth of at least 25 km as interpreted by the conventional model of strain accumulation (continuous slip on the fault below the locking depth at the rate of relative plate motion), whereas the observed seismicity and laboratory data on fault strength suggest that the locking depth should be no greater than 10 to 15 km. The discrepancy is explained by the viscoelastic coupling model which accounts for the viscoelastic response of the lower crust. Thus the broad distribution of deformation observed across the big bend segment can be largely associated with the San Andreas fault itself, not subsidiary faults distributed throughout the region. The Working Group on California Earthquake Probabilities [1995] in using geodetic data to estimate the seismic risk in southern California has assumed that strain accumulated off the San Andreas fault is released by earthquakes located off the San Andreas fault. Thus they count the San Andreas contribution to total seismic moment accumulation more than once, leading to an overestimate of the seismicity for magnitude 6 and greater earthquakes in their Type C zones.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Quantitative measure of the variation in fault rheology due to fluid-rock interactions

We analyze friction data from two published suites of laboratory tests on granite in order to explore and quantify the effects of temperature ( T ) and pore water pressure ( P p ) on the sliding behavior of faults. Rate-stepping sliding tests were performed on laboratory faults in granite containing “gouge” (granite powder), both dry at 23° to 845°C [ Lockner et al. , 1986], and wet ( P p = 100 MPa) at 23° to 600°C [ Blanpied et al ., 1991, 1995]. Imposed slip velocities ( V ) ranged from 0.01 to 5.5 μm/s, and effective normal stresses were near 400 MPa. For dried granite at all temperatures, and wet granite below ∼300°C, the coefficient of friction (μ) shows low sensitivity to V , T , and P p . For wet granite above ∼350°, μ drops rapidly with increasing T and shows a strong, positive rate dependence and protracted strength transients following steps in V , presumably reflecting the activity of a water-aided deformation process. By inverting strength data from velocity stepping tests we determined values for parameters in three formulations of a rate- and state-dependent constitutive law. One or two state variables were used to represent slip history effects. Each velocity step yielded an independent set of values for the nominal friction level, five constitutive parameters (transient parameters a , b 1 , and b 2 and characteristic displacements D c1 and D c2 ), and the velocity dependence of steady state friction ∂μ ss /∂ ln V = a - b 1 − b 2 . Below 250°, data from dry and most wet tests are adequately modeled by using the “slip law” [ Ruina , 1983] and one state variable ( a = 0.003 to 0.018, b = 0.001 to +0.018, D c ≈ 1 to 20 μm). Dried tests above 250° can also be fitted with one state variable. In contrast, wet tests above 350° require higher direct rate dependence ( a = 0.03 to 0.12), plus a second state variable with large, negative amplitude ( b 2 = −0.03 to −0.14) and large characteristic displacement ( D c2 = 300 to >4000 μm). Thus the parameters a , b 1 , and b 2 for wet granite show a pronounced change in their temperature dependence in the range 270° to 350°C, which may reflect a change in underlying deformation mechanism. We quantify the trends in parameter values from 25° to 600°C by piecewise linear regressions, which provide a straightforward means to incorporate the full constitutive response of granite into numerical models of fault slip. The modeling results suggest that the succeptibility for unstable (stick-slip) sliding is maximized between 90° and 360°C, in agreement with laboratory observations and consistent with the depth range of earthquakes on mature faults in the continental crust.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

The excitation and characteristic frequency of the long-period volcanic event: An approach based on an inhomogeneous autoregressive model of a linear dynamic system

We present a method to quantify the source excitation function and characteristic frequencies of long-period volcanic events. The method is based on an inhomogeneous autoregressive (AR) model of a linear dynamic system, in which the excitation is assumed to be a time-localized function applied at the beginning of the event. The tail of an exponentially decaying harmonic waveform is used to determine the characteristic complex frequencies of the event by the Sompi method. The excitation function is then derived by operating an AR filter constructed from the characteristic frequencies to the entire seismogram of the event, including the inhomogeneous part of the signal. We apply this method to three long-period events at Kusatsu-Shirane Volcano, central Japan, whose waveforms display simple decaying monochromatic oscillations except for the beginning of the events. We recover time-localized excitation functions lasting roughly 1 s at the start of each event and find that the estimated functions are very similar to each other at all the stations of the seismic network for each event. The phases of the characteristic oscillations referred to the estimated excitation function fall within a narrow range for almost all the stations. These results strongly suggest that the excitation and mode of oscillation are both dominated by volumetric change components. Each excitation function starts with a pronounced dilatation consistent with a sudden deflation of the volumetric source which may be interpreted in terms of a choked-flow transport mechanism. The frequency and Q of the characteristic oscillation both display a temporal evolution from event to event. Assuming a crack filled with bubbly water as seismic source for these events, we apply the Van Wijngaarden-Papanicolaou model to estimate the acoustic properties of the bubbly liquid and find that the observed changes in the frequencies and Q are consistently explained by a temporal change in the radii of the bubbles characterizing the bubbly water in the crack.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Sulfur in serpentinized oceanic peridotites: Serpentinization processes and microbial sulfate reduction

The mineralogy, contents, and isotopic compositions of sulfur in oceanic serpentinites reflect variations in temperatures and fluid fluxes. Serpentinization of <1 Ma peridotites at Hess Deep occurred at high temperatures (200°–400°C) and low water/rock ratios. Oxidation of ferrous iron to magnetite maintained low ƒO 2 and produced a reduced, low-sulfur assemblage including NiFe alloy. Small amounts of sulfate reduction by thermophilic microbes occurred as the system cooled, producing low-δ 34 S sulfide (1.5‰ to −23.7‰). In contrast, serpentinization of Iberian Margin peridotites occurred at low temperatures(∼20°–200°C) and high water/rock ratios. Complete serpentinization and consumption of ferrous iron allowed evolution to higher ƒO 2 . Microbial reduction of seawater sulfate resulted in addition of low-δ 34 S sulfide (∼15 to ∼43‰) and formation of higher-sulfur assemblages that include valleriite and pyrite. The high SO 4 /total S ratio of Hess Deep serpentinites (0.89) results in an increase of total sulfur and high δ 34 S of total sulfur (mean ∼8‰). In contrast, Iberian Margin serpentinites gained large amounts of 34 S-poor sulfide (mean total S = 3800 ppm), and the high sulfide/total S ratio (0.61) results in a net decrease in δ 34 S of total sulfur (mean ≈ −5‰). Thus serpentinization is a net sink for seawater sulfur, but the amount fixed and its isotopic composition vary significantly. Serpentinization may result in uptake of 0.4–14 × 10 12 g S yr −1 from the oceans, comparable to isotopic exchange in mafic rocks of seafloor hydrothermal systems and approaching global fluxes of riverine sulfate input and sedimentary sulfide output.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Alteration and mineralization of an oceanic forearc and the ophiolite-ocean crust analogy

Mineralogical, chemical, and isotopic (O, C, S, and Sr) analyses were performed on minerals and bulk rocks from a forearc basement section to understand alteration processes and compare with mid-ocean ridges (MOR) and ophiolites. Ocean Drilling Program Hole 786B in the Izu-Bonin forearc penetrates 103 m of sediment and 725 m into volcanic flows, breccias, and basal dikes. The rocks comprise boninites and andesites to rhyolites. Most of the section was affected by low-temperature (<100°C) seawater alteration, with temperatures increasing downward. The rocks are partly (5–25%) altered to smectite, Fe-oxyhydroxide, calcite, and phillipsite, and exhibit gains of K, Rb, and P, loss of Ca, variable changes in Si, Na, Mg, Fe, Sr, and Y, and elevated δ 18 O and 87 Sr/ 86 Sr. Higher temperatures (∼150°C) in the basal dikes below 750 m led to more intense alteration and formation of chlorite-smectite, corrensite, albite, K-feldspar, and quartz (±chlorite). A 5 m thick hydrothermally altered and pyritized zone at 815 m in the basal dikes reacted with mixtures of seawater and hydrothermal fluids to Mg-chlorite, albite, and pyrite, and gained Mg and S and lost Si and Ca. Focused flow of hydrothermal fluids produced serialization halos (Na-K sericite, quartz, pyrophyllite, K-feldspar, and pyrite) along quartz veins at temperatures of 200°–250°C. High 87 Sr/ 86 Sr ratios of chloritized (∼0.7055) and sericitized (∼0.7065) rocks indicate involvement of seawater via mixing with hydrothermal fluids. Low δ 34 S of sulfide (−2 to −5.5‰) and sulfate (12.5‰) are consistent with input of magmatic SO 2 into hydrothermal fluids and disproportionation to sulfide and sulfate. Alteration processes were generally similar to those at MORs, but the arc section is more intensively altered, in part because of the presence of abundant glassy rocks and mafic phases. The increase in alteration grade below 750 m and the mineralization in the basal dikes are analogous to changes that occur near the base of the volcanic section in MOR and the Troodos ophiolite.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Hydrothermal circulation at the Cleft-Vance overlapping spreading center: Results of a magnetometric resistivity survey

We report on a magnetometric resistivity sounding carried out in the overlapping spreading center between the Cleft and Vance segments of the Juan de Fuca Ridge. The data collected reveal a strong three dimensionality in the crustal electrical resistivity structure on wavelengths of a few kilometers. Areas of reduced crustal electrical resistivities, with values approaching that of seawater, are seen beneath the neovolcanic zones of both active spreading centers. We interpret these reduced resistivities as evidence of active hydrothermal circulation within the uppermost 1 km of hot, young oceanic crust.

Journal of Geophysical Research B: Solid Earth↗
USGS1998

Paleoseismic investigations in the Santa Cruz mountains, California: Implications for recurrence of large-magnitude earthquakes on the San Andreas fault

Trenching, microgeomorphic mapping, and tree ring analysis provide information on timing of paleoearthquakes and behavior of the San Andreas fault in the Santa Cruz mountains. At the Grizzly Flat site alluvial units dated at 1640–1659 A.D., 1679–1894 A.D., 1668–1893 A.D., and the present ground surface are displaced by a single event. This was the 1906 surface rupture. Combined trench dates and tree ring analysis suggest that the penultimate event occurred in the mid-1600 s, possibly in an interval as narrow as 1632–1659 A.D. There is no direct evidence in the trenches for the 1838 or 1865 earthquakes, which have been proposed as occurring on this part of the fault zone. In a minimum time of about 340 years only one large surface faulting event (1906) occurred at Grizzly Flat, in contrast to previous recurrence estimates of 95–110 years for the Santa Cruz mountains segment. Comparison with dates of the penultimate San Andreas earthquake at sites north of San Francisco suggests that the San Andreas fault between Point Arena and the Santa Cruz mountains may have failed either as a sequence of closely timed earthquakes on adjacent segments or as a single long rupture similar in length to the 1906 rupture around the mid-1600 s. The 1906 coseismic geodetic slip and the late Holocene geologic slip rate on the San Francisco peninsula and southward are about 50–70% and 70% of their values north of San Francisco, respectively. The slip gradient along the 1906 rupture section of the San Andreas reflects partitioning of plate boundary slip onto the San Gregorio, Sargent, and other faults south of the Golden Gate. If a mid-1600 s event ruptured the same section of the fault that failed in 1906, it supports the concept that long strike-slip faults can contain master rupture segments that repeat in both length and slip distribution. Recognition of a persistent slip rate gradient along the northern San Andreas fault and the concept of a master segment remove the requirement that lower slip sections of large events such as 1906 must fill in on a periodic basis with smaller and more frequent earthquakes.

Journal of Geophysical Research B: Solid Earth↗