Search USGS⌕ Search

SEARCH · Search USGS

Results for “Ground-water Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources

Summary of ground-water hydrological data in Michigan in 1970

The purpose of this report is to make available the records of groundwater levels in principal aquifers of the State through 1970 and to compile other related data, such as records of ground-water pumpage, data on municipal, public and industrial water-supply facilities, and the effects of precipitation on ground-water levels. Records of water levels in areas of heavy pumpage, and in areas where changes are principally from natural influences, are illustrated or tabulated to allow comparison between these types of water- level fluctuations. The water levels and related data provide a day-to-day record for the evaluation of available ground-water supplies. The long-term records serve as a framework to which short-term records may be related. This report is written for those persons, municipalities, industries, institutions, consultants, drillers, and hydrologists interested in the ground-water resources of the State.

Michigan↗

Analytical results from ground-water sampling using a direct-push technique at the Dover National Test Site, Dover Air Force Base, Delaware, June-July 2001

A joint study by the Dover National Test Site and the U.S. Geological Survey was conducted from June 27 through July 18, 2001 to determine the spatial distribution of the gasoline oxygenate additive methyl tert-butyl ether and selected water-quality constituents in the surficial aquifer underlying the Dover National Test Site at Dover Air Force Base, Delaware. The study was conducted to support a planned enhanced bio-remediation demonstration and to assist the Dover National Test Site in identifying possible locations for future methyl tert-butyl ether remediation demonstrations. This report presents the analytical results from ground-water samples collected during the direct-push ground-water sampling study. A direct-push drill rig was used to quickly collect 115 ground-water samples over a large area at varying depths. The ground-water samples and associated quality-control samples were analyzed for volatile organic compounds and methyl tert-butyl ether by the Dover National Test Site analytical laboratory. Volatile organic compounds were above the method reporting limits in 59 of the 115 ground-water samples. The concentrations ranged from below detection limits to maximum values of 12.4 micrograms per liter of cis-1,2-dichloroethene, 1.14 micrograms per liter of trichloroethene, 2.65 micrograms per liter of tetrachloroethene, 1,070 micrograms per liter of methyl tert-butyl ether, 4.36 micrograms per liter of benzene, and 1.8 micrograms per liter of toluene. Vinyl chloride, ethylbenzene, p,m-xylene, and o-xylene were not detected in any of the samples collected during this investigation. Methyl tert-butyl ether was detected in 47 of the 115 ground-water samples. The highest methyl tert-butyl ether concentrations were found in the surficial aquifer from -4.6 to 6.4 feet mean sea level, however, methyl tert-butyl ether was detected as deep as -9.5 feet mean sea level. Increased methane concentrations and decreased dissolved oxygen concentrations were found in samples that contained methyl tert-butyl ether.

Open-File Report↗

U.S. Geological Survey Georgia Water Science Center and Albany Water, Gas, and Light Commission Cooperative Water Program— Summary of activities, July 2005 through June 2006

The U.S. Geological Survey (USGS) has been working with the Albany Water, Gas, and Light Commission to monitor ground-water quality and availability since 1977. This report presents the findings for July 2005 through June 2006 and summarizes the ground-water and surface-water conditions for 2005. Water levels in 14 wells were continuously monitored in Dougherty County, Georgia. Water levels in 12 of those wells were above normal, one was normal, and one was below normal. Ground-water samples collected from the Upper Floridan aquifer indicate that nitrate levels have increased in 13 wells and decreased in two wells from a year earlier. A sample also was collected from the Flint River. A trilinear diagram showing the percent composition of selected major cations and anions indicates that the ground-water quality of the Upper Floridan aquifer at the Albany wellfield is distinctly different from the water quality of the Flint River. To improve the understanding of the ground-water flow system and nitrate movement in the Upper Floridan aquifer, the USGS is developing a ground-water flow model in the southwest Albany area, Georgia.

Georgia↗

Ground-water quality data for the Atlantic Coastal Plain: New Jersey, Delaware, Maryland, Virginia, and North Carolina

This report is a compilation of chemical analyses of ground-water samples in the Atlantic Coastal Plain from North Carolina through New Jersey. It contains records of 3,616 chemical analyses of ground water selected from more than 15,000 analyses in WATSTORE. These analyses serve as the data base for interpreting the geochemistry of the northern Atlantic Coastal Plain aquifer system. Reported chemical data include common anions and cations, selected trace metals, and selected physical characteristics.

Delaware, Maryland, North Carolina, New Jersey, Vi↗

Summary of ground-water conditions in Michigan in 1964

The purpose of this report is to make available records of groundwater level changes in the principal aquifers of the State during 1964 and compile other related data, such as ground-water pumpage, data on municipal, public and industrial water supply facilities, and the effects of precipitation on ground-water levels. Records of water level changes in areas of heavy pumpage and in areas where changes are principally from natural influences are illustrated or tabulated (table 2) to allow comparison between these two types of water-level fluctuations. The water-level and related data prOvide a day-to-day evaluation of available ground-water supplies. These long-term records serve as a framework to which many short-term records collected during an intensive investigation may be related. This report is written for those persons, municipalities, industries, institutions, consultants, drillers and hydrologists interested in the_groundwater resources of the State.

Michigan↗

SutraGUI, a graphical-user interface for SUTRA, a model for ground-water flow with solute or energy transport

This report describes SutraGUI, a flexible graphical user-interface (GUI) that supports two-dimensional (2D) and three-dimensional (3D) simulation with the U.S. Geological Survey (USGS) SUTRA ground-water-flow and transport model (Voss and Provost, 2002). SutraGUI allows the user to create SUTRA ground-water models graphically. SutraGUI provides all of the graphical functionality required for setting up and running SUTRA simulations that range from basic to sophisticated, but it is also possible for advanced users to apply programmable features within Argus ONE to meet the unique demands of particular ground-water modeling projects. SutraGUI is a public-domain computer program designed to run with the proprietary Argus ONE? package, which provides 2D Geographic Information System (GIS) and meshing support. For 3D simulation, GIS and meshing support is provided by programming contained within SutraGUI. When preparing a 3D SUTRA model, the model and all of its features are viewed within Argus 1 in 2D projection. For 2D models, SutraGUI is only slightly changed in functionality from the previous 2D-only version (Voss and others, 1997) and it provides visualization of simulation results. In 3D, only model preparation is supported by SutraGUI, and 3D simulation results may be viewed in SutraPlot (Souza, 1999) or Model Viewer (Hsieh and Winston, 2002). A comprehensive online Help system is included in SutraGUI. For 3D SUTRA models, the 3D model domain is conceptualized as bounded on the top and bottom by 2D surfaces. The 3D domain may also contain internal surfaces extending across the model that divide the domain into tabular units, which can represent hydrogeologic strata or other features intended by the user. These surfaces can be non-planar and non-horizontal. The 3D mesh is defined by one or more 2D meshes at different elevations that coincide with these surfaces. If the nodes in the 3D mesh are vertically aligned, only a single 2D mesh is needed. For nonaligned meshes, two or more 2D meshes of similar connectivity are used. Between each set of 2D meshes (and model surfaces), the vertical space in the 3D mesh is evenly divided into a user-specified number of layers of finite elements. Boundary conditions may be specified for 3D models in SutraGUI using a variety of geometric shapes that may be located freely within the 3D model domain. These shapes include points, lines, sheets, and solids. These are represented by 2D contours (within the vertically-projected Argus ONE view) with user-defined elevations. In addition, boundary conditions may be specified for 3D models as points, lines, and areas that are located exactly within the surfaces that define the model top and the bottoms of the tabular units. Aquifer properties may be specified separately for each tabular unit. If the aquifer properties vary vertically within a unit, SutraGUI provides the Sutra_Z function that can be used to specify such variation.

Open-File Report↗

SutraPlot, a graphical post-processor for SUTRA, a model for ground-water flow with solute or energy transport

This report documents a graphical display post-processor (SutraPlot) for the U.S. Geological Survey Saturated-Unsaturated flow and solute or energy TRAnsport simulation model SUTRA, Version 2D3D.1. This version of SutraPlot is an upgrade to SutraPlot for the 2D-only SUTRA model (Souza, 1987). It has been modified to add 3D functionality, a graphical user interface (GUI), and enhanced graphic output options. Graphical options for 2D SUTRA (2-dimension) simulations include: drawing the 2D finite-element mesh, mesh boundary, and velocity vectors; plots of contours for pressure, saturation, concentration, and temperature within the model region; 2D finite-element based gridding and interpolation; and 2D gridded data export files. Graphical options for 3D SUTRA (3-dimension) simulations include: drawing the 3D finite-element mesh; plots of contours for pressure, saturation, concentration, and temperature in 2D sections of the 3D model region; 3D finite-element based gridding and interpolation; drawing selected regions of velocity vectors (projected on principal coordinate planes); and 3D gridded data export files. Installation instructions and a description of all graphic options are presented. A sample SUTRA problem is described and three step-by-step SutraPlot applications are provided. In addition, the methodology and numerical algorithms for the 2D and 3D finite-element based gridding and interpolation, developed for SutraPlot, are described. 1

Open-File Report↗

Geology and ground-water resources of the Lufkin area, Texas

This report covers Angelina County, Texas, of which Lufkin is the county seat, and parts of Nacogdoches and other adjacent counties. The area is underlain by a series of sands, clays, and shales of Eocene age that dip, in general, southward at an angle a little greater than that of the land surface, which also slopes southward, thus creating favorable artesian conditions. The formations cropping out in the area from north to south are the Wilcox group undifferentiated, the Carrizo sand, the Mont Selman formation, consisting of the Reklaw member, the Queen City sand member, and the Weches greensand member, the Sparta sand, the Cook Mountain and Yegua formations, and the Jackson group undifferentiated. Small supplies of potable water may be obtained from shallow wells in the outcrop areas of most of these formations. Only three of the formations appear to be likely to yield large supplies of water to wells, and in these the water is under sufficient artesian pressure in most places to cause wells to flow. The Yegua formation yields large amounts of water to some wells in the vicinity of Lufkin. However, the water is moderately mineralized and is not acceptable for municipal use except after dilution with surface water and treatment to reduce mineralization. Moreover, most of the wells in this formation yield only small quantities of water, which is highly mineralized. The Sparta sand appears to be likely to yield large supplies of water to wells throughout the northern part of Angelina County. The water, however, is moderately to highly mineralized and cannot be used for purposes that require water of good quality. The Carrizo sand promises to yield large quantities of water low in mineralization in northern Angelina County and southern Nacogdoches County. Computations indicate that the present southward flow through the formation is about 2,750,000 gallons a day, but pumping from wells and thus increasing the hydraulic gradient would greatly increase the flow. Considerable amounts of water will also be released from storage in the formation after pumping begins.

Water Supply Paper↗

Ground-water resources of the Houston district, Texas

This report covers the current phase of an investigation of the supply of ground water available for the Houston district and adjacent region, Texas,- that has been in progress during the past 10 years. The field operations included routine inventories of pumpage, measurements of water levels in observation wells and collection of other hydrologic data, pumping tests on 21 city-owned wells to determine coefficients of permeability and storage, and the drilling of 13 deep test wells in unexplored parts of the district. Considerable attention has been given to studies of the location of areas or beds of sand that contain salt water. The ground water occurs in beds of sand, sandstone, and gravel of Miocene, Pliocene, and Pleistocene age. These formations crop out in belts that dip southeastward from their outcrop areas and are encountered by wells at progressively greater depths toward the southeast. The beds throughout the section are lithologically similar, and there is little agreement among geologists as to their correlation. -In this investigation, however, the sediments, penetrated by the wells are separated into six zones, chiefly on the basis of electrical logs. Most of the water occurs in zone 3, which ranges in thickness from 800 to 1,200 feet. Large quantities of ground water are pumped in three areas in the Houston district, as follows: The Houston tromping area, which includes Houston and the areas immediately adjacent; the Pasadena pumping area, which includes the industrial section extending along the ship channel from the Houston city limits eastward to Deer Park; and the Katy pumping area, an irregular-shaped area of several hundred square miles, which is roughly centered around the town of Katy, 30 miles west of Houston. In 1930 the total combined withdrawal of ground water in the Houston and Pasadena pumping areas averaged about 50 million gallons a day. It declined somewhat during 1932 and 1933 and then gradually increased, until in 1935 the total pumpage was about the same as it was in 1930. About March 1, 1937, the pumpage was increased by about 40 percent, when new wells near Pasadena were put into operation. During 1940 it is estimated that the total pumpage in the Houston and Pasadena areas averaged about 79 million gallons a day, an increase of about 65 percent over the pumpage in 1935. About 25 million gallons of this increase has occurred in the Pasadena area. In the Katy rice-growing area the pumpage in 1935 was about 14 million gallons a day; in 1937 it was about 30 million gallons a day; in 1939 about 40 million gallons a day; and in 1940 about 45 million gallons a day. In 1940 the estimated total pumpage from the Houston, Pasadena, and Katy pumping areas was about 124 million gallons a day, or twice as much as it was in 1935. The increase in pumping at Pasadena in the spring-of 1937 caused the water leveling wells in the Houston and Pasadena areas, which had not varied materially for about 7 years, to decline at a rapid rate. Further increases in the pumping both at Houston and Pasadena in 1939 and 1940 has caused further substantial decline. The water levels in wells in the Katy rice-growing area also declined materially. The evidence points to the probability that in all parts of the Houston district, except the Katy rice-growing area, the rainfall is recharging the aquifers at a rate greater than that at which the water is transmitted down the dip. In the Katy area the recharge is insufficient to balance the joint discharge by transmission down the dip and withdrawal from rice-irrigating wells. The average coefficient of transmissibility was. calculated as 160,000 gallons a day. On the basis of these estimates the inflow in February 1940 across the artesian contour 10 feet below sea level (see pl. 10) was computed as 72 million gallons a day. The amount of water taken out of artesian storage in the 300-square mile area within the -10 contour during the period February 1939 to February

Water Supply Paper↗

Ground-water problems in highway construction and maintenance

This report discusses the occurrence of ground water in relation to certain problems in highway construction and maintenance. These problems are: the subdrainage of roads; quicksand; the arrest of soil creep in road cuts; the construction of lower and larger culverts necessitated by the farm-drainage program; the prevention of failure of bridge abutments and retaining walls; and the water-cement ratio of sub-water-table concrete. Although the highway problems and suggested solutions are of general interest, they are considered with special reference to the State of Delaware, in relation to the geology of that State. The new technique of soil stabilization by electroosmosis is reviewed in the hope that it might find application here in road work and pile setting, field application by the Germans and Russians is reviewed.

Delaware↗

Ground-water resources of Tinian, Commonwealth of the Northern Mariana Islands

Tinian, which lies in the western Pacific Ocean at latitude 15°N and longitude 145°W (fig. 1), is the second largest island (39.2 mi 2 ) in the Commonwealth of the Northern Mariana Islands (CNMI). Fresh ground water is obtained from shallow wells that tap the surface of a freshwater lends found in an aquifer composed mainly of coralline limestone. The main water-supply well withdraws water with a chloride concentration ranging from 160 to 220 mg/L. Current (1999) pumping rates adequately supply the island residents but future demand are expected to be higher.. To better understand the ground-water resources of the island and to learn more about the hydrology of oceanic islands, the U.S. Geological Survey (USGS) entered into a cooperative study with the Municipality of Tinian. The objective of the study, conducted between 1990 and 1997, was to assess the ground-water resources of the is;land. This report presents some of the results of the study including a description of the island's geology and geography, the current land use, the water-production system, the thickness and arcal extent of the freshwater lens, the water-table configuration and directions of ground-water flow. The report also discusses the relation of the changes in water-table elevation to daily and seasonal changes in ocean level.

Tinian Island↗

Simulations of Ground-Water Flow, Transport, Age, and Particle Tracking near York, Nebraska, for a Study of Transport of Anthropogenic and Natural Contaminants (TANC) to Public-Supply Wells

Contamination of public-supply wells has resulted in public-health threats and negative economic effects for communities that must treat contaminated water or find alternative water supplies. To investigate factors controlling vulnerability of public-supply wells to anthropogenic and natural contaminants using consistent and systematic data collected in a variety of principal aquifer settings in the United States, a study of Transport of Anthropogenic and Natural Contaminants to public-supply wells was begun in 2001 as part of the U.S. Geological Survey National Water-Quality Assessment Program. The area simulated by the ground-water flow model described in this report was selected for a study of processes influencing contaminant distribution and transport along the direction of ground-water flow towards a public-supply well in southeastern York, Nebraska. Ground-water flow is simulated for a 60-year period from September 1, 1944, to August 31, 2004. Steady-state conditions are simulated prior to September 1, 1944, and represent conditions prior to use of ground water for irrigation. Irrigation, municipal, and industrial wells were simulated using the Multi-Node Well package of the modular three-dimensional ground-water flow model code, MODFLOW-2000, which allows simulation of flow and solutes through wells that are simulated in multiple nodes or layers. Ground-water flow, age, and transport of selected tracers were simulated using the Ground-Water Transport process of MODFLOW-2000. Simulated ground-water age was compared to interpreted ground-water age in six monitoring wells in the unconfined aquifer. The tracer chlorofluorocarbon-11 was simulated directly using Ground-Water Transport for comparison with concentrations measured in six monitoring wells and one public supply well screened in the upper confined aquifer. Three alternative model simulations indicate that simulation results are highly sensitive to the distribution of multilayer well bores where leakage can occur and that the calibrated model resulted in smaller differences than the alternative models between simulated and interpreted ages and measured tracer concentrations in most, but not all, wells. Results of the first alternative model indicate that the distribution of young water in the upper confined aquifer is substantially different when well-bore leakage at known abandoned wells and test holes is removed from the model. In the second alternative model, simulated age near the bottom of the unconfined aquifer was younger than interpreted ages and simulated chlorofluorocarbon-11 concentrations in the upper confined aquifer were zero in five out of six wells because the conventional Well Package fails to account for flow between model layers though well bores. The third alternative model produced differences between simulated and interpreted ground-water ages and measured chlorofluorocarbon-11 concentrations that were comparable to the calibrated model. However, simulated hydraulic heads deviated from measured hydraulic heads by a greater amount than for the calibrated model. Even so, because the third alternative model simulates steady-state flow, additional analysis was possible using steady-state particle tracking to assess the contributing recharge area to a public supply well selected for analysis of factors contributing to well vulnerability. Results from particle-tracking software (MODPATH) using the third alternative model indicates that the contributing recharge area of the study public-supply well is a composite of elongated, seemingly isolated areas associated with wells that are screened in multiple aquifers. The simulated age distribution of particles at the study public-supply well indicates that all water younger than 58 years travels through well bores of wells screened in multiple aquifers. The age distribution from the steady-state model using MODPATH estimates the youngest 7 percent of the water to have a flow-weighted mean age

Scientific Investigations Report↗

Shallow ground-water quality in the Coastal Plain of Columbia, South Carolina, 1996

As part of the National Water-Quality Assessment (NAWQA) Program, the U.S. Geological Survey (USGS) oversaw the installation of 30 shallow monitoring wells in the Columbia, South Carolina metropolitan area. The ground water sampled from these wells was used to study the recent effects of human activities on shallow ground water in an urban setting. Well locations were selected in residential and commercial areas constructed between 1960 and 1990 while all industrial and agricultural areas were avoided. Samples were collected and analyzed for major ions, nutrients, pesticides, and volatile organic compounds (VOCs) dunng 1996. This report describes the results of this investigation of shallow ground-water quality.

North Carolina, South Carolina↗

Ground water investigations in Oklahoma

Prior to 1937, ground-water work in Oklahoma consisted of broad scale early-day reconnaissance and a few brief investigations of local areas. The reconnaissance is distinguished by C. N. Gould's "Geology and Water Resources of Oklahoma" (Water-Supply Paper 148, 1905), which covers about half of the present State of Oklahoma. Among the shorter reports are two by Schwennesen for areas near Enid and Oklahoma City, one by Renick for Enid, and one by Thompson on irrigation possibilities near Gage. These reports are now inadequate by modern standards. Cooperative ground-water work in Oklahoma by the United States Geological Survey began in 1937, with the Oklahoma Geological Survey as cooperating agency. With the passage of the new ground-water law by the State Legislature in 1949, the need for more information on available ground waters and the safe yield of the various aquifers became very pressing. Accordingly, the Division of Water Resources of the Oklahoma Planning and Resources Board, to which was delegated the responsibility of administering the Ground-Water Law, entered into a cooperative agreement with the U.S. Geological Survey, providing for an expansion of ground-water investigations. Both cooperators have consistently given full and enthusiastic cooperation, often beyond the requirements of the cooperative program. The first cooperative investigation was an evaluation of ground-water supplies available for irrigation in the Panhandle. In 1937 the Panhandle was still very much in the dust bowl, and it was hoped that irrigation would alleviate the drought. A bulletin on Texas County was published in 1939, and one on Cimarron County in 1943. Ground-water investigations during the World War II were restricted to the demands of Army and Navy installations, and to defense industries. Ground-water investigations since 1945 have included both country-wide and aquifer-type investigations. In Oklahoma it has been the policy for the State cooperator to publish the results of the ground-water investigation.

Oklahoma↗

Ground-water-quality assessment of the central Oklahoma aquifer, Oklahoma: Hydrologic, water-quality, and quality-assurance data 1987-90

This report presents data collected from 202 wells between June 1987 and September 1990 as part of the Central Oklahoma aquifer pilot study of the National Water-Quality Assessment Program. The report describes the sampling networks, the sampling procedures, and the results of the ground-water quality and quality-assurance sample analyses. The data tables consist of information about the wells sampled and the results of the chemical analyses of ground water and quality-assurance sampling. Chemical analyses of ground-water samples in four sampling networks are presented: A geochemical network, a low-density survey bedrock network, a low-density survey alluvium and terrace deposits network, and a targeted urban network. The analyses generally included physical properties, major ions, nutrients, trace substances, radionuclides, and organic constituents. The chemical analyses of the ground-water samples are presented in five tables: (1) Physical properties and concentrations of major ions, nutrients, and trace substances; (2) concentrations of radionuclides and radioactivities; (3) carbon isotope ratios and delta values (d-values) of selected isotopes; (4) concentrations of organic constituents; and (5) organic constituents not reported in ground-water samples. The quality of the ground water sampled varied substantially. The sum of constituents (dissolved solids) concentrations ranged from 71 to 5,610 milligrams per liter, with 38 percent of the wells sampled exceeding the Secondary Maximum Contaminant Level of 500 milligrams per liter established under the Safe Drinking Water Act. Values of pH ranged from 5.7 to 9.2 units with 20 percent of the wells outside the Secondary Maximum Contaminant Level of 6.5 to 8.5 units. Nitrite plus nitrate concentrations ranged from less than 0.1 to 85 milligrams per liter with 8 percent of the wells exceeding the proposed Maximum Contaminant Level of 10 milligrams per liter. Concentrations of trace substances were highly variable, ranging from below the reporting level to concentrations over the Maximum Contaminant Levels for several constituents (arsenic, barium, cadmium, chromium, lead, and selenium). Radionuclide activities also were highly variable. Gross alpha radioactivity ranged from 0.1 to 210 picocuries per liter as 230thorium. Of the wells sampled, 20 percent exceeded the proposed Maximum Contaminant Level of 15 picocuries per liter for gross alpha radioactivity. Organic constituents were detected in 39 percent of the 170 wells sampled for organic constituents; in most cases concentrations were at or near the laboratory minimum reporting levels. Ten of the wells sampled for organic constituents had one or more constituents (chlordane, dieldrin, heptachlor epoxide, trichloroethylene, 1,1-dichloroethylene, 1,1,1-trichloroethane) at concentrations equal to or greater than the Maximum Contaminant Level or acceptable concentrations as suggested in the Environmental Protection Agency's Health Advisory Summaries. Quality-assurance sampling included duplicate samples, repeated samples, blanks, spikes, and blind samples. These samples proved to be essential in evaluating the accuracy of the data, particularly in the case of volatile organic constituents.

Oklahoma↗