Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources
USGS2008

High resolution shallow geologic characterization of a late Pleistocene eolian environment using ground penetrating radar and optically stimulated luminescence techniques: North Carolina, USA

Geophysical surveys, sedimentology, and optically-stimulated luminescence age analyses were used to assess the geologic development of a coastal system near Swansboro, NC. This area is a significant Woodland Period Native American habitation and is designated the "Broad Reach" archaeological site. 2-d and 3-d subsurface geophysical surveys were performed using a ground penetrating radar system to define the stratigraphic framework and depositional facies. Sediment samples were collected and analyzed for grain-size to determine depositional environments. Samples were acquired and analyzed using optically stimulated luminescence techniques to derive the depositional age of the various features. The data support a low eolian to shallow subtidal coastal depositional setting for this area. Li-DAR data reveal ridge and swale topography, most likely related to beach ridges, and eolian features including low-relief, low-angle transverse and parabolic dunes, blowouts, and a low-relief eolian sand sheet. Geophysical data reveal dominantly seaward dipping units, and low-angle mounded features. Sedimentological data reveal mostly moderately-well to well-sorted fine-grained symmetrical to coarse skewed sands, suggesting initial aqueous transport and deposition, followed by eolian reworking and bioturbation. OSL data indicate initial coastal deposition prior to ca. 45,000 yBP, followed by eolian reworking and low dune stabilization at ca. 13,000 to 11,500 yBP, and again at ca. 10,000 yBP (during, and slightly after the Younger Dryas chronozone).

Southeastern Geology↗
USGS1997

Deep structure of Medicine Lake volcano, California

Medicine Lake volcano (MLV) in northeastern California is the largest-volume volcano in the Cascade Range. The upper-crustal structure of this Quaternary shield volcano is well known from previous geological and geophysical investigations. In 1981, the U.S. Geological Survey conducted a teleseismic tomography experiment on MLV to explore its deeper structure. The images we present, calculated using a modern form of the ACH-inversion method, reveal that there is presently no hint of a large (> 100 km 3 ), hot magma reservoir in the crust. The compressional-wave velocity perturbations show that directly beneath MLV's caldera there is a zone of increased seismic velocity. The perturbation amplitude is +10% in the upper crust, +5% in the lower crust, and +3% in the lithospheric mantle. This positive seismic velocity anomaly presumably is caused by mostly subsolidus gabbroic intrusive rocks in the crust. Heat and melt removal are suggested as the cause in the upper mantle beneath MLV, inferred from petro-physical modeling. The increased seismic velocity appears to be nearly continuous to 120 km depth and is a hint that the original melts come at least partly from the lower lithospheric mantle. Our second major finding is that the upper mantle southeast of MLV is characterized by relatively slow seismic velocities (−1%) compared to the northwest side. This anomaly is interpreted to result from the elevated temperatures under the northwest Basin and Range Province.

California↗
USGS1983

Mineral resource potential map of the Blanco Mountain and Black Canyon Roadless Areas, Inyo and Mono Counties, California

On the basis of geologic, geochemical, and geophysical investigations and a survey of mines and prospects, the mineral resource potential for gold, silver, lead, zinc, tungsten, and barite of the Blanco Mountain and Black Canyon Roadless Areas is judged to be low to moderate, except for one local area that has high potential for gold and tungsten resources. A geochemical survey detected moderately anomalous amounts of lead, copper, and zinc and less anomalous concentrations of tungsten, gold, and silver. Elements in anomalous samples were grouped as suites known to form in various ore deposits. Four element suites that may be indicative of mineralization are recognized in the White Mountains: (1) lead, zinc, and silver in carbonate rocks; (2) copper, barite, and lead in veins and replacement bodies; (3) tungsten, molybdenum, and bismuth in skarns; and (4) gold and arsenic in mineralized quartz veins. The assessment of the areas of resource potential was made in part by the application of ore deposit models to the geochemical results. A mineral deposit survey by the U.S. Bureau of Mines indicates that there are no properties with identified mineral resources in the Blanco Mountain Roadless Area. There is one active placer claim. In the Black Canyon Roadless Area, two properties have 40,000 tons of indicated and inferred low-grade gold, silver, or lead-bearing rock. Five properties near this roadless area have 150,000 tons of indicated and inferred low-grade gold, silver, lead, zinc, or tungsten-bearing rock. About 90 percent of this tonnage is estimated to occur at the Mirage-Mariposa and the Hope mines. The roadless areas have no known resource potential for geothermal energy, coal, oil, or gas.

California↗
USGS2000

Seismic-reflection investigations of the Texas Springs Syncline for ground water development, Death Valley National Park

The U.S. Geological Survey has completed an integrated geologic and geophysical study of the Texas Springs syncline for the National Park Service with the intention of locating a new production water well near existing water-collection and distribution facilities. Subsurface information was required to determine which, if any, sites within the syncline would be favorable for a well. About 4.2 km (2.6 mi.) of high-resolution seismic-reflection data were collected across and along the Texas Springs syncline. Two of our three lines, designated DV-1 and DV-3, cross the syncline, whereas the third line (DV-2) runs parallel to the north-northwest-trending syncline axis.

Open-File Report↗
USGS1996

Hydrogeologic assessment of shallow clastic and carbonate rock aquifers in Hendry and Collier counties, southwestern Florida

Direct-current electrical resistivity data were collected from 109 vertical electrical sounding sites in Hendry and Collier Counties, southwestern Florida. Selected direct-current electrical resistivity surveys, together with available borehole geologic and geophysical data, were used to determine the approximate areal extent of the shallow clastic aquifers composed of thick sands and carbonate lithologies. Results indicated that a complex pattern of shallow sands, clays, and carbonate lithologies occur throughout the area. Buried channel sands were found as deep as 50 meters below land surface in some places. The channels contain unconsolidated fine- to medium-grained quartz sand interbedded with sandy limestone, shell fragments, and gray-green sandy clay. Both surface and borehole geophysical techniques with lithologic data were necessary to approximately locate and define layers that might behave as confining layers and to locate and define the extent of any buried sand aquifers. The borehole geophysical data were used to analyze the zones of higher resistivity. Direct-current electrical resistivity data indicated the approximate location of certain layer boundaries. The conjunctive use of natural gamma and short- and long-normal resistivity logs was helpful in determining lithologic effects. Geohydrologic sections were prepared to identify potential locations of buried channels and carbonates containing freshwater. Buried channel sands and carbonate rock sections were identified in the subsurface that potentially may contain freshwater supplies.

Florida↗
USGS1988

Geophysical instrumentation near Parkfield

The geophysical instrumentation operated by the U.S Geological Survey and others near Parkfield is designed to monitor ongoing tectonic processes that generate earthquakes and to record the strong shaking that results from larger shocks and its effects. this discussion focuses on the former objectives; the latter is discussed in the next section "Ground Shaking and Engineering Studies on the Parkfield Section of the San Andreas Fault Zone." Because scientists expect the anticipated earthquake to resemble the historic Parkfield earthquakes, and in particular that in 1966, the data from the 1966 shock were used to site instruments for optimun benefit before, during, and after the next shock. the primary feature used for siting was the "1966 rupture zone," which is shown as the orange fault traces on the maps in this section. This zone defines the extent of surface tectonic cracks in 1966 and includes the source areas for fore shocks to the 1934 and 1966 earthquakes (north end of the zone) as well as for apparent precursory fault creep in 1966 (near center of the zone). Scientists believe that if precursors to the next shock are observed, they most likely will be near the 1966 rupture zone.

California↗
USGS1981

Preliminary report on geophysics ground follow-up of the 1977 airborne survey in the Wadi Bidah District, Kingdom of Saudi Arabia

Reconnaissance geologic and geochemical sampling was made during the 1978 field season at most of the 50 or so electromagnetic anomalies detected in the 1977 airborne electromagnetic (AEM) survey of the Wadi Bidah district. These Phase 1 studies also included reconnaissance geophysical traverses of nine of the AEM conductors. In addition the AEM anomalies were classified on the basis of this reconnaissance work into a list of priority targets for use in economic studies, and six AEM anomalies were selected for further studies. During Phase 2 conducted in the 1979 field season, ground geophysical work consisting of electromagnetic (EM), self-potential (SP), and selected magnetic surveys were carried out in the six targets selected in the Phase 1 studies. These target areas in aggregate cover about 30 km 2, and are approximately half of the Wadi Bidah Class 1 and Class 2 priority targets found during the 1977 airborne electromagnetic (AEM) survey of parts of the Arabian Shield. The results indicate possible extension of known reserves at the Rabathan area (AEM anomaly B-29), with possible potential for mineralization in the area extending 15-20 km north (anomaly B-13), where the geologic and geophysical environment is similar. An important observation is that mineralization in the B-29 (Rabathan) zone is coincident with narrow SP anomalies superimposed on the larger, broader, and more formational-type SP anomalies encountered in both areas B-29 and B-13. AEM anomaly B-25-26 areahas geophysical characteristics that show in the groundwork and that make it an attractive drill target. EM and SP anomalies are associated, in part, with magnetic anomalies and with exposures of significant limonitic gossan. Wadi al Khadra prospect, not included in the 1977 AEM survey, and the AEM anomaly B-25-26 area were also high-mineralization-potential products of the Phase 2 studies. Target area B-35 remains an unknown quantity, and AEM anomaly B-24 is almost certainly due to a carbonaceous schist. Geochemical results, along with detailed geologic mapping and the geophysical data, indicate several potential mineralized targets. Further detailed geophysics (EM and SP) will assist in understanding the geophysical data thus far collected. Further ground follow-up studies are recommended.

Open-File Report↗
USGS2018

Characterizing the subsurface geology in and around the U.S. Army Camp Stanley Storage Activity, south-central Texas

Several U.S. Geological Survey projects, supported by the National Cooperative Geologic Mapping Program, have used multi-disciplinary approaches over a 14-year period to reveal the surface and subsurface geologic frameworks of the Edwards and Trinity aquifers of central Texas and the Arbuckle-Simpson aquifer of south-central Oklahoma. Some of the project achievements include advancements in hydrostratigraphic mapping, three-dimensional subsurface framework modeling, and airborne geophysical surveys as well as new methodologies that link geologic and groundwater flow models. One area where some of these milestones were achieved was in and around the U.S. Army Camp Stanley Storage Activity, located in north­western Bexar County, Texas, about 19 miles north­west of downtown San Antonio.

Texas↗
USGS2016

Regional geophysics of western Utah and eastern Nevada, with emphasis on the Confusion Range

As part of a long term geologic and hydrologic study of several regional groundwater flow systems in western Utah and eastern Nevada, the U.S. Geological Survey was contracted by the Southern Nevada Water Authority to provide geophysical data. The primary object of these data was to enable construction of the geological framework of the flow systems. The main new geophysical data gathered during the study were gravity observations, and existing aeromagnetic data were also compiled. These data resulted in regional maps of the isostatic gravity and aeromagnetic fields of the area. The isostatic gravity map shows a north-south grain to most of the area, which was imparted by post-20 Ma basin-range tectonism; whereas the aeromagnetic map shows an east-west grain to the area, imparted by Eocene to lower Miocene calc-alkaline calderas and source intrusions. To de-emphasize surface and near-surface features and to gain greater insight into contributions from deeper sources, the isostatic gravity anomalies were upward continued by 3 km and the aeromagnetic data were transformed to their magnetic potential ("pseudogravity"). Identification of maxima of the horizontal gradients in the gravity and magnetic-potential data helped define deep-seated crustal blocks that are characterized by major changes in density and magnetization. Maps showing these maxima were useful in defining large faults, especially range-bounding faults, and margins of igneous bodies and calderas. A gravity inversion method was used to separate the isostatic residual anomaly into pre-Cenozoic basement and young basin fill. Inasmuch as the primary aquifer in the area is sedimentary basin fill, this method is especially valuable for hydrogeologic analyses because it estimates the thickness of the fill. As befits its name, the geology of the Confusion Range of Utah has been a point of contention for many years, so we looked at it in greater detail in the course of our regional study. The northern part of the range is underlain by a large gravity high, which continues south through the Conger Range, Burbank Hills, and northern Mountain Home Range. This is the "structural trough" reported in the literature that was mapped as the axial part of a Sevier synclinorium and contains the maximum thickness (7 km) of high-density carbonates in the area, thus the largest high gravity anomaly.

Utah↗
USGS1984

Aeromagnetic, Bouguer gravity, and interpretation maps of the Sheep Hole-Cadiz Wilderness Study Area (CDCA-305), San Bernardino County, California

The Federal Land Policy and Management Act (Public Law 94-579, October 21, 1976) requires the U.S. Geological Survey and the U.S. Bureau of Mines to conduct mineral surveys on certain areas to determine their mineral resource potential. Results must be made available to the public and be submitted to the President and the Congress. These maps presents the results of a mineral survey of the Sheep Hole-Cadiz Wilderness Study Area (CDCA-305), California Desert Conservation Area, San Bernardino County, California. The U.S. Bureau of Mines conducted a mineral survey of the Sheep Hole-Cadiz Wilderness Study Area, which encompasses approximately 200,000 acres including enclosed private lands, in south-central San Bernardino County, California. The U.S. Bureau of Mines studied the mineral resources of mines, prospects, and mineralized areas; geologic, geochemical, and geophysical investigations were conducted by the U.S. Geological Survey. The study area is located in the Mojave Desert 13 miles east of Amboy, California, 20 miles east of Twentynine Palms, California, and 90 miles east of San Bernardino, and encompasses parts of the Dale Lake, Bristol Lake, Cadiz Valley and Cadiz Lake 15-minute quadrangles. Its borders are defined by the Amboy Road and a gas pipeline service road on the northwest, the unimproved Cadiz Valley access road on the east, State Route 62 along the south, and the Iron Age mine road and an unimproved powerline service road on the west. Major access from the east and west is provided by State Route 62 and access from the north is provided by the Amboy Road. Companion reports to this one describe the mineral resource potential (March and others, 1982), the geology (Howard and John, 1984), and hydrothermal alteration studies (Raines, 1983).

California↗
USGS2007

Geosoft eXecutables (GX's) Developed by the U.S. Geological Survey, Version 2.0, with Notes on GX Development from Fortran Code

Introduction Geosoft executables (GX's) are custom software modules for use with the Geosoft Oasis montaj geophysical data processing system, which currently runs under the Microsoft Windows 2000 or XP operating systems. The U.S. Geological Survey (USGS) uses Oasis montaj primarily for the processing and display of airborne geophysical data. The ability to add custom software modules to the Oasis montaj system is a feature employed by the USGS in order to take advantage of the large number of geophysical algorithms developed by the USGS during the past half century. This main part of this report, along with Appendix 1, describes Version 2.0 GX's developed by the USGS or specifically for the USGS by contractors. These GX's perform both basic and advanced operations. Version 1.0 GX's developed by the USGS were described by Phillips and others (2003), and are included in Version 2.0. Appendix 1 contains the help files for the individual GX's. Appendix 2 describes the new method that was used to create the compiled GX files, starting from legacy Fortran source code. Although the new method shares many steps with the approach presented in the Geosoft GX Developer manual, it differs from that approach in that it uses free, open-source Fortran and C compilers and avoids all Fortran-to-C conversion.

Open-File Report↗
USGS1980

Instrument specifications and geophysical records for airborne electromagnetic survey of parts of Iron, Baraga, and Dickson Counties, Michigan

The data presented herein is from an airborne electromagnetic INPUT* survey conducted by Geoterrex Limited of Canada for the U.S. Geological Survey. The survey area is located in the central part of the Upper Peninsula of Michigan, within parts of Iron, Baraga, and Dickinson Counties. The general area covered is between 46°00' and 46°30' latitude and 88°00' and 88°30' longitude (fig. 1). The INPUT survey was flown as part of a U.S. Geological Survey CUSMAP (Conterminous United States Mineral Appraisal Program) project focusing on the Iron River 2° quadrangle. The survey was flown in order to provide geophysical information which will aid in an integrated geological assessment of mineral potentials of this part of the Iron River 2° quadrangle. The flight line spacing was chosen to maximize the areal coverage without a loss of resolution of major lithologic and structural features. East-west flight lines were flown 400 feet above ground at 1/2 mile intervals. Aerial photos were used for navigation, and the flight path was recorded on continuous-strip film. A continuously recording total field ground magnetic station was used to monitor variations in the Earth's magnetic field. One north-south line was flown to provide a tie for the magnetic data, which was recorded simultaneously with the electromagnetic data by a sensor mounted in the tail of the aircraft. This report is one of two open-file reports. The map in the other report Heran and Smith (1980) shows locations of the fiducial points, the flight lines, preliminary locations of anomalies and conductive zones; all plotted on an air photomosaic. The latitude and longitude ticks marked on this map are only approximate due to distortion in air photos used to recover the flight line position. This map is preliminary and is not to be considered a final interpretation. The present report contains a description of the instrument specifications, a copy of the ground station magnetic data, and a record of the electromagnetic and magnetic data, with reference to the digital data of the flight records. The purpose of two reports is to make the analog and magnetic records available separate from the anomaly map. The following sections on the general description of the INPUT system are abridged from a typical interpretation report prepared by Geoterrex Limited of Ottawa, Canada for the U.S. Geological Survey.

Michigan↗
USGS1984

Low-level radioactive-waste burial at the Palos Forest Preserve, Illinois: Geology and hydrology of the glacial drift, as related to the migration of tritium

A low-level radioactive-waste burial site is located in Palos Forest Preserve, about 22 kilometers southwest of Chicago, Illinois. Between 1943 and 1949 the site, named Plot M, was filled with radioactive waste from the first Argonne National Laboratory and from the University of Chicago Metallurgical Laboratory. Since 1973, tritium concentration levels up to 14 nanocuries per liter have been measured in water samples collected from a well 360 meters from the burial site. The U.S. Geological Survey is studying the geologic, hydrologic, and geochemical properties of the glacial drift and underlying bedrock at the Plot M site to determine the factors that control the movement of radionuclides. Test wells were drilled into the drift to collect water and core samples for laboratory analysis, to gather geologic and hydrologic data, and to conduct geophysical surveys. Plot M is located in drift that ranges in thickness from 25 to 45 meters. The drift is a stratified sequence of clay- and silt-rich sediments that contain thin, interstratified sand layers. The silt content of the drift increases with depth. The permeability of the drift, as indicated by field and laboratory hydraulic conductivity tests, ranges from 1.0 x 10 -6 to 1.0 ? 10 -8 centimeters per second. A tritium plume, the contaminated zone in the drift in which tritium concentration levels exceed 10 nanocuries per liter of water, extends horizontally northward from Plot M at least 50 meters and vertically downward to bedrock. The center of the plume, where tritium concentration levels are as high as 50,000 nanocuries per liter, is approximately 15 meters beneath the burial site. The size, shape, and 'bull's-eye' concentration pattern indicate that the plume is a single slug and that the site no longer releases tritium into the drift. The leading edge, or front, of the plume (the 10 nanocuries per liter boundary) left the burial site in either the late 1940's or the early 1950's and intersected the underlying bedrock surface before 1973. The calculated movement rate of the front is 6.3 x 10 -6 centimeters per second. Several key factors that control both the concentration level and the extent of migration of tritium in the drift at Plot M are 1. The limited amount of tritiated waste buried at Plot M. 2. The long period of time that has elapsed since the waste was buried (30-35 years) relative to the radioactive half-life of tritium (12.3 years). 3. The great thickness and low permeability of the glacial drift at the site.

Illinios↗
USGS1977

Reconnaissance drilling in the Yampa coal field, Hayden-Williams Fork Mountains area (Yampa No. 3), Moffat and Routt counties, Colorado, during 1976

Under Contract No. 14-08-0001-15727, awarded by the U.S. Geological Survey, Jim Feighny, of Loveland, Colo., drilled 42 test holes in the Williams Fork Mountains near Hayden, Colo., in September 1976. The area is referred to in the Contract as Yampa No. 3, which includes the Bureau of Land Management's (ELM) tracts WF-10, WF-12, WF-16, and WF-17. The purpose of the drilling was to obtain information on the quality and extent of the coal in the area. All holes were logged using either Gamma-Gamma (density), Natural Gamma, Caliper, Resistivity, or spontaneous-potential (SP) geophysical logs. The logging was done by the U.S. Geological Survey, the Birdwell Division of Seismograph Service Corp., Century Geophysical, and Geodynamics, Inc. The water level is indicated in table 1 for each drill hole at the time the hole was logged. All holes were drilled on private surface, and surface ownership is shown in table 1.

Colorado↗