Search USGS⌕ Search

SEARCH · Search USGS

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32Linked to original sources
USGS1987

Ice erosion of a sea-floor knickpoint at the inner edge of the stamukhi zone, Beaufort Sea, Alaska

In 1981 and 1982, detailed bathymetric and side-scan sonar surveys were made of an area of the sea floor north of Prudhoe Bay, Alaska, to study the changing characteristics of the seabed at the inner boundary of the stamukhi zone, the coast-parallel zone of grounded ice ridges that occurs in water depths between 15 and 50 m in the arctic. The fathograms and sonographs resolved 10-cm features and electronic navigation gave relocations accurate to about 10 m. Year after year an ice boundary develops at the inner edge of the stamukhi zone where major shear and pressure deformation occur in about the same location. Associated with this ice boundary, the bathymetry shows a pronounced break in slope — the knickpoint — on the shelf profile at about 20 m depth. The 2–3 m-high knickpoint is cut in a consolidated gravelly mud of pre-Holocene age. A well-defined gravel and cobble shoal a few meters high usually occurs at the inshore edge of the knickpoint. The sonograph mosaic shows that seaward of the knickpoint, ice gouges saturate the sea floor and are well defined; inshore the gouges are fewer in number and are poorly defined on the records. Few gouges can be traced from the seaward side of the knickpoint across the shoals to the inshore side of the knickpoint. Studies of ice gouging rates in two seabed corridors that cross the stamukhi zone reveal the highest rates of gouging seaward of the knickpoint. We believe that the knickpoint results from ice erosion at the inner boundary of the stamukhi zone. Intensified currents associated with this boundary winnow away fine sediments. Ice bulldozing and currents shape the shoals, which perch atop the knickpoint. The knickpoint helps to limit ice forces on the seabed inshore of the stamukhi zone.

Marine Geology↗
USGS1988

Fossil diatoms and neogene paleolimnology

Diatoms have played an important role in the development of Neogene continental biostratigraphy and paleolimnology since the mid-19th Century. The history of progress in Quaternary diatom biostratigraphy has developed as a result of improved coring techniques that enable sampling sediments beneath existing lakes coupled with improved chronological control (including radiometric dating and varve enumeration), improved statistical treatment of fossil diatom assemblages (from qualitative description to influx calculations of diatom numbers or volumes), and improved ecological information about analogous living diatom associations. The last factor, diatom ecology, is the most critical in many ways, but progresses slowly. Fortunately, statistical comparison of modern diatom assemblages and insightful studies of the nutrient requirements of some common freshwater species are enabling diatom paleolimnologists to make more detailed interpretations of the Quaternary record than had been possible earlier, and progress in the field of diatom biology and ecology will continue to refine paleolimnological studies. The greater age and geologic setting of Tertiary diatomaceous deposits has prompted their study in the contexts of geologic history, biochronology and evolution. The distribution of diatoms of marine affinities in continental deposits has given geologists insights about tectonism and sea-level change, and the distribution of distinctive (extinct?) diatoms has found utilization both in making stratigraphic correlations between outcrops of diatomaceous deposits and in various types of biochronological studies that involve dating deposits in different areas. A continental diatom biochronologic scheme will rely upon evolution, such as the appearance of new genera within a family, in combination with regional environmental changes that are responsible for the wide distribution of distinctive diatom species. The increased use of the scanning electron microscope for the detailed descriptions of fossil diatoms will provide the basis for making more accurate correlations and identifications, and the micromorphological detail for speculations about evolutionary relationships.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1992

Geochronology and subsurface stratigraphy of Pukapuka and Rakahanga atolls, Cook Islands: Late Quaternary reef growth and sea level history

Eustatic sea-level cycles superposed on thermal subsidence of an atoll produce layers of high sea-level reefs separated by erosional unconformities. Coral samples from these reefs from cores drilled to 50 m beneath the lagoons of Pukapuka and Rakahanga atolls, northern Cook Islands give electron spin resonance (ESR) and U-series ages ranging from the Holocene to 600,000 yr B.P. Subgroups of these ages and the stratigraphic position of their bounding unconformities define at least 5 periods of reef growth and high sea-level (0–9000 yr B.P., 125,000–180,000 yr B.P., 180,000–230,000 yr B.P., 300,000–460,000 yr B.P., 460,000–650,000 yr B.P.). Only two ages fall within error of the last interglacial high sea-level stand (∼125,000–135,000 yr B.P.). This paucity of ages may result from extensive erosion of the last intergracial reef. In addition, post-depositional isotope exchange may have altered the time ages of three coral samples to apparent ages that fall within glacial stage 6. For the record to be preserved, vertical accretion during rising sea-level must compensate for surface lowering from erosion during sea-level lowstands and subsidence of the atoll; erosion rates (6–63 cm/1000 yr) can therefore be calculated from reef accretion rates (100–400 cm/1000 yr), subsidence rates (2–6 cm/1000 yr), and the duration of island submergence (8–15% of the last 600,000 yr). The stratigraphy of coral ages indicates island subsidence rates of 4.5 ± 2.8 cm/1000 yr for both islands. A model of reef growth and erosion based on the stratigraphy of the Cook Islands atolls suggests average subsidence and erosion rates of between 3–6 and 15–20 cm/1000 yr, respectively.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1994

Euramerican tonsteins: Overview, magmatic origin, and depositional-tectonic implications

Carboniferous tonsteins (kaolinized volcanic-ash beds) of wide geographic distribution are known in both Europe and North America. Relict volcanic minerals common in these Euramerican tonsteins are volcanic quartz (including beta-quartz paramorphs), zircon and ilmenite; less common are magnetite, fayalite, rutile, monazite, xenotime, apatite and sanidine. Data for two relatively thick (3-13 cm) and widespread (>400 km) European tonsteins (Erda and Sub-Worsley Four-foot) indicate an increase in detrital quartz near the top of the beds which indicates mixing with normal clastic sediments, including the introduction of heavy detrital minerals (e.g., tourmaline and garnet). These thick tonsteins show multiple horizontal bedding, normal graded bedding, disturbed bedding, and centimeter-scale scour surfaces. The Fire Clay tonstein in North America represents from one to five separate volcanic air-fall ash deposits as determined by normal graded bedding and mineralogical analysis. These features indicate several episodes of volcanic-ash deposition and very localized subsequent erosion and bioturbation. Electron microprobe data from glass inclusions in volcanic quartz in Euramerican tonsteins indicate a rhyolitic origin for these tonsteins and reveal chemical "fingerprints" valuable for intra- and inter-basinal correlations. However, the tectonic framework for European and North American tonsteins was quite different. In Europe, volcanic-ash beds were associated with Variscan collisional tectonics, whereas in North America, volcanic ash was associated with Ouachita tectonic activity, explosive volcanism from the Yucatan block, collision between the South American and North American plates, and the formation of Pangea.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1968

Paleomagnetism and the compositions of highly-oxidised iron-titanium oxides in basalts

As a preliminary step towards determination of the source of the natural remanence in highly-oxidised basalt lava flows, electron probe microanalysis has been carried out on the two main phases in each of two types of highly-oxidised iron-titanium oxide. The discovery of the source of NRM in these basalts is important because the correlations obtained recently by several workers between high oxidation and reversed polarity in basalts appear to support the possibility of self-reversal, even though some of the rocks studied give independent indications that the reversed magnetizations are due to field reversal. In one type of grain analysed the probe data are consistent with a titanohematite phase and a pseudobrookite phase. This agrees with previous petrographic data. In the other type of grain the probe data are consistent with one phase of titanohematite but contradict petrographic data by showing that the other phase cannot be titanomagnetite. It is concluded that significant contributions to the NRM could possibly arise from the titanohematite (whose magnetic properties in basalts are little known) or the unindentified phase (unless subsequent work rules this phase out), but not in the pseudobrookite phase. However, the NRM may not lie in the analysed grains at all; and other workers are at present investigating this possibility.

Physics of the Earth and Planetary Interiors↗
USGS1989

Comparison of geoelectrical/tectonic models for suture zones in the western U.S.A. and eastern Europe: are black shales a possible source of high conductivities?

Large-scale geoelectrical anomalies have been mapped with geomagnetic depth sounding (GDS) and magnetotelluric (MT) surveys in the Carpathian Mountains region. These anomalies are associated with the zone of closure between stable Europe and a complex of microplates in front of the converging African plate. The zone of closure, or suture zone, is largely occupied by an extensive deformed flysch belt. The models derived to fit the observed geoelectrical data are useful in the study of other suture zones, and Carpathian structures have been compared with areas currently being studied in the western Cordillera of the U.S.A. Models derived for a smaller-scale suture zone mapped in western Washington State have features that are similar to the Carpathian models. The geoelectrical models for both the Carpathian and Washington anomalies require dipping conductive slabs of 1-5 ?? m material that extends to depths > 20 km. In both instances there is evidence that these materials may merge with lower crustal-mantle conductors along the down-dip margins of the slab. The main conductive units are interpreted to be sedimentary rocks that have been partially subducted due to collisional processes. Heat flow is low in both regions and it is difficult to explain fully the deep conduction mechanisms; however, evidence suggests that the conduction at depth may include electronic conduction in sulfide mineral or carbon films as well as ionic conduction in fluids or partial melt. ?? 1989.

Physics of the Earth and Planetary Interiors↗
USGS1985

A method for the determination of vanadium and iron oxidation states in naturally occurring oxides and silicates

A valence-specific analytical method for determining V 3+ in ore minerals has been developed that involves two steps: dissolution of a mineral sample without disturbing the V 3+ /V tot ratio, followed by determination of V 3+ in the presence of V 4+ . The samples are dissolved in a mixture of hydrofluoric and sulphuric acids at 100° in Teflon-lined reaction vessels. Tervalent vanadium is then determined colorimetrically by formation of a V 3+ -thiocyanate complex in aqueous-acetone medium. Fe 3+ is measured semi-quantitatively in the same solution. The method has been tested with two naturally occurring samples containing vanadium and iron. The results obtained were supported by those obtained by other methods, including electron spin resonance spectroscopy, thermogravimetric analysis, and Mössbauer spectroscopy.

Talanta↗
USGS1982

Zooplankton production and manipulation in striped bass rearing ponds

Zooplankton production and survival of striped bass fry ( Morone saxatilis ) were examined in ponds treated either with organic fertilizer (in 1980) or with a combination of organic and liquid inorganic fertilizers and inoculated with Daphnia pulex (in 1981). In 1980, there were significant differences in water quality variables and chlorophyll α levels among treatments in three series of three ponds fertilized only with different amounts of ground hay. Production of crustacean zooplankton was low, and rotifer populations increased as the number of crustaceans was reduced by predation. Electron transport system (ETS) activity was low in all treatments. Survival of striped bass differed greatly within and between treatments, ranging from 1 to 64% and averaging 17%. In 1981, water quality variation was less among treatments in four series of three ponds inoculated with Daphnia and fertilized either with chicken litter-chicken manure in combination with liquid ammonium nitrate and phosphoric acid, or with ground hay. Rotifer species were less abundant and numbers of crustacean zooplankton, total protein, and ETS activity were higher than in 1980. Survival of striped bass in 1981 ranged from 1 to 96% and averaged 45% in the ponds fertilized and inoculated with Daphnia . Numbers of striped bass fingerlings produced per hectare and percent survival were significantly greater in 1981 (manure-fertilized ponds) than in 1980 (hay-fertilized ponds). Combinations of organic and liquid inorganic fertilizers and zooplankton inoculation are suggested to develop and maintain the zooplankton forage base in striped bass rearing ponds. Management effort (including the amounts and timing of organic and liquid inorganic fertilizers) should be shifted to maximize crustacean zooplankton foods during the period 2 weeks before and 2 weeks after the fish are stocked.

Aquaculture↗
USGS1994

Effect of subatmospheric pressure on the performance of an automated packed-column nitrogen desorption system

A portable vacuum degasser was developed to satisfy seasonal hatchery pretreatment needs. Dissolved-gas pressures in water exiting a packed column were regulated automatically with a unique feedback control loop incorporating a gasometer, pressure transducer, electronic (PID) controller and an electrically actuated pump discharge valve. The flow capacity of the system was 160 l/min with a total power requirement of 0·81 kW. Following controller tuning, field tests demonstrated the ability of the feedback loop to set appropriate column vacuum levels quickly in response to varying inlet dissolved-gas pressures or changes in selected controller set points. The degasser's ability to reduce dissolved nitrogen (DN) and increase dissolved oxygen (DO) concentrations was also assessed at four or five pure-oxygen feed rates under each of four column vacuum levels (−4·5, −9·0, −14·6 and −20·0 cm Hg). Performance was then compared with that predicted with a multicomponent gas transfer model. Relative error of model projections averaged just 7·7% for DO and 2·3% for DN (n = 19). Effluent DN ranged between 60·6 and 96·4% of saturation concentrations at 8·8°C with the influent DN at 135% of saturation. The high DN desorption rates achieved allow side-stream pretreatment with blending.

Aquacultural Engineering↗
USGS1991

Variation of organic sulfur in macerals of selected Illinois Basin coals

An electron microbeam technique was used to determine the distribution of organic sulfur in the main macerals of five Illinois Basin coals. On average, sporinites are the highest, inertinites the lowest, and vitrinites intermediate in organic sulfur for each coal. The observed differences are likely due to varying affinities of the different pre-maceral materials for sulfur and/or local variation in the production of H 2 S primarily during the peat stage. Investigation of molecular structures of individual macerals in relation to the findings of this study may delineate the relative abundance of organic sulfur in various organic compounds and thus lead to the development of efficient desulfurization processes.

Organic Geochemistry↗
USGS1993

Differentiation of volcanic ash-fall and water-borne detrital layers in the Eocene Senakin coal bed, Tanjung Formation, Indonesia

The Sangsang deposit of the Eocene Senakin coal bed, Tanjung Formation, southeastern Kalimantan, Indonesia, contains 11 layers, which are thin (<5 cm) and high in ash (> 70%). These layers are characterized by their pelitic macroscopic texture. Examination of eight of the layers by scanning-electron microscopy, energy-dispersive X-ray, and X-ray diffraction analyses show that they are composed primarily of fairly well-crystallized kaolinite, much of which is vermicular. Accessory minerals include abundant Ti oxide, rare-earth element-rich Ca and A1 phosphates, quartz that luminescences in the blue color range, and euhedral to subhedral pyroxene, hornblende, zircon, and sanidine. Although this mineral suite is suggestive of volcanic ash-fall material, only the four pelitic layers in the middle of the bed are thought to be solely derived from volcanic ash-falls on the basis of diagnostic minerals, replaced glass shards, and lithostratigraphic relationships observed in core and outcrop. The three uppermost pelitic layers contain octahedral chromites, some quartz grains that luminesce in teh orange color range, and some quartz grains that contain two-phase fluid inclusions. These layers are interpreted to be derived from a combination of volcanic ash-fall material and hydrologic transport of volcaniclastic sediment. In contrast, the lowermost pelitic layer, which contains large, rounded FeMg-rich chromites, is thought to have been dominantly deposited by water. The source of the volcanic ash-fall material may have been middle Tertiary volcanism related to plate tectonic activity between Kalimantan and Sulawesi. The volcanic ash was deposited in sufficient amounts to be preserved as layers within the coal only in the northern portions of the Senakin region: the southern coal beds in the region do not contain pelitic layers.

southeastern Kalimantan↗
USGS1993

SEM-EDX and isotope characterization of the organic sulfur in macerals and chars in Illinois Basin coals

Two samples of the Herrin (Illinois No. 6) Coal and one sample of the Colchester (Illinois No. 2) Coal from the Illinois Basin were studied to evaluate the spatial distribution of organic sulfur within macerals occurring next to pyrite grains, both in the raw coal and their chars. The chars were produced by pyrolysing the coal at 250–550°C in a nitrogen atmosphere. Representative splits of the coals and their chars were mounted in epoxy and polished for optical microscopy and scanning electron microscopy-energy dispersive x-ray spectroscopy (SEM-EDX). Determinations of organic sulfur concentrations were made at 996 locations within macerals, mostly vitrinite, around 115 grains of pyrite and at 50 locations around 5 pores in chars. The pyrite considered here is restricted to the disseminated type within macerals. On the average, the organic sulfur content increased near pyrite grains after the coals were charred at 550°C, indicating that some of the pyritic sulfur released during charring was retained within the organic matrix rather than being emitted to the atmosphere. One of the coal samples and its chars were isotopically characterized by chemically separating the pyritic and organic sulfur fractions, followed by analyzing the isotopes of the sulfur forms with a Nuclide 6–60 ratio mass spectrometer. The sulfur isotope (δ 34 S) data confirmed the movement of pyritic sulfur into the macerals after charring to 550°C. About 18% of the organic sulfur that remained in the 550°C char had originally been pyritic sulfur in the untreated coal.

Organic Geochemistry↗
USGS1993

Factors affecting the geochemistry of a thick, subbituminous coal bed in the Powder River Basin: Volcanic, detrital, and peat-forming processes

The inorganic geochemistry and mineralogy of three cores from the Anderson-Dietz 1 coal bed, a 15.2-m-thick subbituminous coal bed in the Tongue River Member (Paleocene) of the Fort Union Formation, were examined (1) to determine if the cores could be correlated by geochemical composition alone over a total distance of 2 km and (2) to identify the major factors that influenced the geochemistry of the coal bed. Chemical data (46 elements on a coal-ash basis) for 81 coal samples and 4 carbonaceous rock samples, with most samples representing a 0.6-m-thick (2-ft) interval of core, were grouped into compositional clusters by means of cluster analysis. Seven major clusters were produced; two of these clusters can be used to correlate the coal bed throughout the study area. Data from scanning electron and optical microscope analyses indicate that several factors influenced the geochemistry of the Anderson-Dietz 1 coal bed. The majority of mineral grains in the coal bed are interpreted to be detrital (water borne); evidence includes the presence of rounded to subrounded quartz grains having two-phase, aqueous fluid inclusions characteristic of hydrothermal or low-to-moderate grade metamorphic quartz. These quartz grains are found throughout the coal bed but are most abundant in samples from the midpart of the bed, which was influenced by detrital input associated with the deposition of the clastic rocks that form the split between the Anderson and Dietz 1 coal beds 900 m to the east of the study area. In addition to the detrital minerals mentioned above, volcanic ash that was fluvially transported to the sites of peat deposition or possibly deposited as air-fall volcanic ash also affected the geochemistry of the coal bed. For example, crandallite(?), a mineral reported to form as an alteration product of volcanic ash, is found in seven samples from the coal bed. The presence of quartz grains containing silicate-melt inclusions in eight samples from the coal bed.provides further support for a volcanic ash component. Other factors that probably affected the geochemistry of the coal bed include (1) detrital input associated with the deposition of the roof rocks of the coal bed, (2) peat-forming processes and plant material, and (3) epigenetic ground-water flow.

Montana, Wyoming↗
USGS1982

Properties, origin and nomenclature of rodlets of the inertinite maceral group in coals of the central Appalachian basin, U.S.A.

Resin rodlets, sclerenchyma strands and woody splinters, which are collectively called rodlets, were studied by chemical, optical petrographic, and scanning-electron microscopic (SEM) techniques. A study was made of such rodlets from the bituminous coal beds of the central Appalachian basin (Pennsylvanian; Upper Carboniferous) of the United States. Comparisons were made with rodlets from coal beds of the Illinois basin, the Southern Anthracite Field of Pennsylvania, the St. Rose coal field of Nova Scotia, and European and other coal fields. In order to determine their physical and chemical properties, a detailed study was made of the rodlets from the Pomeroy coal bed (high volatile A bituminous coal; Monongahela Formation; Upper Pennsylvanian) of Kanawha County, West Virginia. The origin of the rodlets was determined by a comparative analysis of a medullosan (seed fern) stem from the Herrin (No. 6) coal bed (high volatile C bituminous coal; Carbondale Formation) from Washington County, Illinois. Rodlets are commonly concentrated in fusain or carbominerite layers or lenses in bituminous coal beds of the central Appalachian basin. Most of the rodlets examined in our study were probably derived from medullosan seed ferns. The three types of rodlets are distinguished on the basis of cellularity, morphology and fracture.

International Journal of Coal Geology↗
USGS1996

Origin and significance of high nickel and chromium concentrations in pliocene lignite of the Kosovo Basin, Serbia

Trace element data from 59 Pliocene lignite cores from the lignite field in the Kosovo Basin, southern Serbia, show localized enrichment of Ni and Cr (33-304 ppm and 8-176 ppm, respectively, whole-coal basis). Concentrations of both elements decrease from the western and southern boundaries of the lignite field. Low-temperature ash and polished coal pellets of selected bench and whole-coal samples were analyzed by X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray analyses. These analyses show that most of the Ni and Cr are incorporated in detrital and, to a lesser degree, in authigenic minerals. The Ni- and Cr-bearing detrital minerals include oxides, chromites, serpentine-group minerals and rare mixed-layer clays. Possible authigenic minerals include Ni-Fe sulfates and sulfides. Analyses of three lignite samples by a supercritical fluid extraction technique indicate that some (1-11%) of the Ni is organically bound. Ni- and Cr-bearing oxides, mixed-layer clays, chromites and serpentine-group minerals were also identified in weathered and fresh samples of laterite developed on serpentinized Paleozoic peridotite at the nearby Glavica and C??ikatovo Ni mines. These mines are located along the western and northwestern rim, respectively, of the Kosovo Basin, where Ni contents are highest. The detrital Ni- and Cr-bearing minerals identified in lignite samples from the western part of the Kosovo Basin may have been transported into the paleoswamp by rivers that drained the two Paleocene laterites. Some Ni may have been transported directly into the paleoswamp in solution or, alternatively, Ni may have been leached from detrital minerals by acidic peat water and adsorbed onto organic matter and included into authigenic mineral phases. No minable source of Ni and Cr is known in the southern part of the lignite field; however, the mineral and chemical data from the lignite and associated rocks suggest that such a source area may exist.

International Journal of Coal Geology↗
USGS1993

Rare earth element concentrations in geological and synthetic samples using synchrotron X-ray fluorescence analysis

The concentrations of rare earth elements (REEs) in specific mineral grains from the Bayan Obo ore deposit and synthetic high-silica glass samples have been measured by synchrotron X-ray fluorescence (SXRF) analysis using excitation of the REE K lines between 33 and 63 keV. Because SXRF, a nondestructive analytical technique, has much lower minimum detection limits (MDLs) for REEs, it is an important device that extends the in situ analytical capability of electron probe microanalysis (EPMA). The distribution of trace amounts of REEs in common rock-forming minerals, as well as in REE minerals and minerals having minor quantities of REEs, can be analyzed with SXRF. Synchrotron radiation from a bending magnet and a wiggler source at the National Synchrotron Light Source, Brookhaven National Laboratory, was used to excite the REEs. MDLs of 6 ppm (La) to 26 ppm (Lu) for 3600 s in 60-??m-thick standard samples were obtained with a 25-??m diameter wiggler beam. The MDLs for the light REEs were a factor of 10-20 lower than the MDLs obtained with a bending magnet beam. The SXRF REE concentrations in mineral grains greater than 25 ??m compared favorably with measurements using EPMA. Because EPMA offered REE MDLs as low as several hundred ppm, the comparison was limited to the abundant light REEs (La, Ce, Pr, Nd). For trace values of medium and heavy REEs, the SXRF concentrations were in good agreement with measurements using instrumental neutron activation analysis (INAA), a bulk analysis technique. ?? 1993.

Nuclear Instruments and Methods in Physics Researc↗
USGS1990

Chemistry and palynology of carbon seams and associated rocks from the Witwatersrand goldfields, South Africa

Carbon seams in the Witwatersrand System of South Africa host some of the richest gold concentrations in the world. A study of the microscopic characteristics in thin sections and acid residues, and of the chemical and physical nature of the carbon-bearing phases, was undertaken to gain some understanding of the biological precursors and thermal changes that have occurred since the seams were buried. The HCl HF acid-resistant organic tissues in this Early Proterozoic coal are filamentous and spherical, which are typical morphologies for microorganisms. The tissues are carbonized black as would be expected for metamorphic rocks, so usual palynological techniques were of limited use. Therefore, the chemical and physical nature of the organic remains was studied by H C "> HC ratios, X-ray diffraction (XRD), 13 C nuclear magnetic resonance (NMR), reductive chemistry, crosspolarization/magic angle spinning NMR (CP/MAS), and electron spin resonance (ESR). The H C "> HC ratios of the samples examined are similar to those of semi-anthracite and petroleum cokes from delayed cokers. XRD shows graphite is not present and that the gold is in elemental form, not chemically bound or intercalated between carbon planes. NMR shows that both aromatic and paraffinic carbons are present. Integration of the carbon NMR spectra suggests that 80% of the carbon is sp 2 -hybridized and 20% is sp 3 -hybridized. Reductive chemistry shows that the benzenoid entities are larger than common polynuclear aromatic hydrocarbons such as perylene and decacyclene. Dipolar dephasing CP/MAS NMR suggests the presence of two types of paraffinic carbons, a rigid methylene group and a rotating methyl group. The narrowing of the ESR linewidth between room temperature and 300°C shows that the materials examined have not previously been subjected to temperatures as high as 300°C.

Witwatersrand goldfields↗
USGS1985

Apatitic connecting rings in moulds of Baculites sp. from the middle part of the Smoky Hill Member, Niobrara Chalk (Santonian), of western Kansas

Moulds of Baculites sp. are common in the Smoky Hill Member but only five known specimens contain connecting rings that have been preserved because of mineralisation by carbonate apatite. Analysis of four of these specimens suggests that the connecting rings were originally composed of organic material and were mineralised during early diagenesis. Thin sections and scanning electron microscopy demonstrate that the connecting rings had a two-layered structure consisting of a thick siphuncular wall and a thin pellicle.

Kansas↗