Search USGS⌕ Search

SEARCH · Search USGS

Results for “Annual Operations Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources

Hydrogeologic framework and hydrologic budget components of the Columbia Plateau Regional Aquifer System, Washington, Oregon, and Idaho

The Columbia Plateau Regional Aquifer System (CPRAS) covers an area of about 44,000 square miles in a structural and topographic basin within the drainage of the Columbia River in Washington, Oregon, and Idaho. The primary aquifers are basalts of the Columbia River Basalt Group (CRBG) and overlying sediment. Eighty percent of the groundwater use in the study area is for irrigation, in support of a $6 billion per year agricultural economy. Water-resources issues in the Columbia Plateau include competing agricultural, domestic, and environmental demands. Groundwater levels were measured in 470 wells in 1984 and 2009; water levels declined in 83 percent of the wells, and declines greater than 25 feet were measured in 29 percent of the wells. Conceptually, the system is a series of productive basalt aquifers consisting of permeable interflow zones separated by less permeable flow interiors; in places, sedimentary aquifers overly the basalts. The aquifer system of the CPRAS includes seven hydrogeologic units-the overburden aquifer, three aquifer units in the permeable basalt rock, two confining units, and a basement confining unit. The overburden aquifer includes alluvial and colluvial valley-fill deposits; the three basalt units are the Saddle Mountains, Wanapum, and Grande Ronde Basalts and their intercalated sediments. The confining units are equivalent to the Saddle Mountains-Wanapum and Wanapum-Grande Ronde interbeds, referred to in this study as the Mabton and Vantage Interbeds, respectively. The basement confining unit, referred to as Older Bedrock, consists of pre-CRBG rocks that generally have much lower permeabilities than the basalts and are considered the base of the regional flow system. Based on specific-capacity data, median horizontal hydraulic conductivity (Kh) values for the overburden, basalt units, and bedrock are 161, 70, and 6 feet per day, respectively. Analysis of oxygen isotopes in water and carbon isotopes in dissolved inorganic carbon from groundwater samples indicates that groundwater in the CPRAS ranges in age from modern (<50 years) to Pleistocene (>10,000 years). The oldest groundwater resides in deep, downgradient locations indicating that groundwater movement and replenishment in parts of this regional aquifer system have operated on long timescales under past natural conditions, which is consistent with the length and depth of long flow paths in the system. The mean annual recharge from infiltration of precipitation for the 23-year period 1985-2007 was estimated to be 4.6 inches per year (14,980 cubic feet per second) using a polynomial regression equation based on annual precipitation and the results of recharge modeling done in the 1980s. A regional-scale hydrologic budget was developed using a monthly SOil WATer (SOWAT) Balance model to estimate irrigation-water demand, groundwater flux (recharge or discharge), direct runoff, and soil moisture within irrigated areas. Mean monthly irrigation throughout the study area peaks in July at 1.6 million acre-feet (MAF), of which 0.45 and 1.15 MAF are from groundwater and surface-water sources, respectively. Annual irrigation water use in the study area averaged 5.3 MAF during the period 1985-2007, with 1.4 MAF (or 26 percent) supplied from groundwater and 3.9 MAF supplied from surface water. Mean annual recharge from irrigation return flow in the study area was 4.2 MAF (1985-2007) with 2.1 MAF (50 percent) occurring within the predominately surface-water irrigated regions of the study area. Annual groundwater-use estimates were made for public supply, self-supplied domestic, industrial, and other uses for the period 1984 through 2009. Public supply groundwater use within the study area increased from 200,600 acre-feet per year (acre-ft/yr) in 1984 to 269,100 acre-ft/yr in 2009. Domestic self-supplied groundwater use increased from 54,580 acre-ft/yr in 1984 to 71,160 acre-ft/yr in 2009. Industrial groundwater use decreased from 53,390 acre-ft/yr in 1984 t

Scientific Investigations Report↗

Potentiometric surface of the Mississippi River Valley alluvial aquifer, spring 2016

A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer using selected available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time after installation, but some wells were measured more than one time or continually; streamgages are typically operated continuously. Personnel from the Arkansas Natural Resources Commission, Arkansas Department of Health, Arkansas Geological Survey, Illinois Department of Agriculture, Illinois State Water Survey, Louisiana Department of Natural Resources, Louisiana Department of Transportation and Development, Mississippi Department of Environmental Quality, Yazoo Mississippi Delta Joint Water Management District, U.S. Department of Agriculture–Natural Resources Conservation Service, and the U.S. Geological Survey (USGS) routinely collect groundwater data from wells screened in the MRVA aquifer. The USGS and the U.S. Army Corps of Engineers routinely collect data on river stage and discharge for the rivers overlying the MRVA aquifer. The potentiometric surface map for 2016 was created using existing data as part of the USGS Water Availability and Use Science Program to support investigations that characterize the MRVA aquifer. Sufficient groundwater-altitude data were available to create a potentiometric-surface map for spring 2016 for about 81 percent of the aquifer area. The potentiometric contours ranged from 10 to 340 feet. The regional direction of groundwater flow in the MRVA aquifer was generally towards the south-southwest, except in areas of groundwater-altitude depressions, where groundwater flows into the depressions, and near rivers, where groundwater flow generally parallels the flow in the rivers. There are large depressions in the potentiometric surface of the MRVA aquifer in the lower half of the Cache region and in most of the Grand Prairie and Delta regions.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗

Dam removal cost databases and drivers

The United States (U.S.) has over 90,000 dams listed in the National Inventory of Dams that provide vital infrastructure to support water management for municipal and industrial uses including irrigation, hydropower, flood control, navigation, recreation, and habitat, among other uses (NID 2023). The Bureau of Reclamation (Reclamation) and U.S. Army Corps of Engineers (USACE) operate and maintain approximately 489 and 740 dams, respectively, as well as associated structures which provide flood risk management, navigation, water supply, hydropower, environmental stewardship, fish and wildlife conservation, and recreation benefits. As dams age, structural and operational maintenance investments increase until a time when decisions on whether to rehabilitate, replace, or decommission the dam need to be made. While most dams continue to provide important value even with maintenance requirements, at least 2,000 dams have been removed in the U.S. during the past 110 years, with an upward trend in the last few decades (American Rivers 2023). Decommissioning a dam may be considered when the purpose of the dam is no longer needed or other factors such as dam safety, fish passage, recreation safety, or river restoration goals take higher priority and are more economically feasible for the dam owner long-term. Dam safety programs, river restoration programs, and asset class management programs need cost estimating methods to consider dam decommissioning when appropriate. Traditional cost estimating approaches in planning stages focus mainly on dam removal construction and may leave out or have uncertainty on important complexities that can have substantial effects on total costs and be critical for project success. As the numbers of dam removal case studies increase, a growing set of cost data has become available (Duda et al. 2023a; Tullos and Bountry 2023; American Rivers 2022). However, total costs vary over five orders of magnitude for similar size dams, and it was unclear why. We evaluated three sets of cost data that had varying level of details regarding elements contributing to dam removal costs reported by project managers working on the dam removal studies and construction means and methods. We created planning-level cost estimating tools to assist with projects needing to consider the dam removal alternative: (1) new databases of case studies (Duda et al. 2023a; Tullos and Bountry 2023); (2) scoping questions to help determine if complexity cost drivers will be present; (3) machine learning based regression trees to estimate a potential cost range; and (4) a Computation Guide for Cost Estimating that can be used to inform discussions on potential dam removal cost items, quantities, and unit costs (appendix A). The collected data showed that dam height is important but is not a reliable predictor of the removal cost without considering other elements. However, knowing some basic characteristics about the average annual flow and geographic location of the dam site, in addition to dam size, can improve the ability to use past case studies for planning-level cost estimating. By additionally incorporating scoping questions related to sediment removal, mitigation, or other infrastructure, the likelihood of complexity cost drivers and the initial uncertainty of a cost estimate can be further reduced especially for small dams. Applying the Computation Guide for Cost Estimating requires more robust information but helps users reduce cost uncertainty. This step further refines the dam removal objective, removal approach (partial or full; phased or instantaneous), engineering design, construction means and methods, quantities, and unit costs, and results in a quantitative cost estimate.

Final Report↗

Critical minerals in subduction-related magmatic-hydrothermal systems of the United States

During the World War and Cold War eras (1910s–1990s), domestic consumption of numerous mineral commodities relied increasingly on imported supplies. Consumption reliance has since expanded to include 50 “critical minerals” (elements and mineral commodities) that are mostly to entirely imported and subject to curtailment by suppliers or supply chain disruption. New domestic supplies of critical minerals are being pursued by mining companies and by several federal departments and agencies. Information on domestic deposits and resources of critical minerals is being compiled by the U.S. Geological Survey Mineral Resources Program, which has organized investigations by mineral system, deposit type, and commodity. Production, reserves, resources, and inventories of 21 critical minerals in domestic magmatic-hydrothermal deposits related to subduction-generated magmatism, and in tailings, slag, slimes, and electrolyte from copper concentrators, smelters, and refineries that processed some deposits, are largely restricted to Western States and Alaska. The critical mineral commodities Al, Sb, As, Bi, Co, fluorite, Ga, Ge, In, Mn, Ni, Nb, Pd, Pt, potash, Re, Ta, Te, Sn, W, and V are variably concentrated in porphyry/skarn copper-(molybdenum), skarn-replacement-vein (S-R-V) tungsten, polymetallic sulfide S-R-V intermediate sulfidation (IS), high-sulfidation gold-silver, low-sulfidation gold-silver, and lithocap alunite deposit types. These deposit types occur in porphyry copper-molybdenum-gold, alkalic porphyry, porphyry tin (granite related), and reduced intrusion-related mineral systems. Production, reserves, and resources of Co, Ni, Nb, Pd, Pt, Ta, Sn, and V in subduction-related deposits in Western States are insignificant to small, mostly equivalent to months to a few years of recent annual domestic consumption (2016–2020). Significant inventories, equivalent to 2 or more years of consumption of aluminum, antimony, potash, and tungsten in unmined S-R-V tungsten, polymetallic sulfide S-R-V-IS, and lithocap alunite deposits vary from approximately 2 to 8 years. Several decades of consumption of arsenic, bismuth, fluorite, gallium, germanium, and indium exist in some polymetallic sulfide S-R-V-IS and lithocap alunite deposit types. Based on concentrations of critical minerals in reserves, resources, drill holes, and deposit domains (ore types), and in captive refinery records, the largest domestic inventories of Sb, As, Bi, Re, and Te, and possibly Ga, Ge, In, Sn, and W, are in porphyry copper-molybdenum (Cu-Mo) deposits in Alaska, Idaho, Utah, and Arizona, and in interim products of processing porphyry Cu-Mo deposit ores for recovery of copper and molybdenum. Concentrations of critical minerals in archival specimens and sample collections, although somewhat biased by collection and conservation decisions and categorization, are broadly proportionate to those in reserves, resources, and drill holes. These concentrations imply significant inventories of some critical minerals in deposits for which production, resources, and refinery records are unavailable or incomplete. Because of the large masses of ores mined and processed annually (hundreds of millions of metric tons) and in reserves and resources (hundreds of millions of metric tons to billions of metric tons), calculated inventories of critical minerals in porphyry Cu-Mo deposits are equivalent to decades and centuries of recent consumption. However, these inventories should not be considered consumable supplies without reserve definition and development of economically viable mining plans and recovery techniques. An expeditious strategy for elimination or reduction of import reliance is recovery, and improved recovery efficiency, of Sb, As, Bi, Re, and Te, and possibly Ga, Ge, In, Ni, Sn, Ti, and W; during concentration and refining of copper and molybdenum minerals in ores of operating porphyry Cu-Mo mines; and in unmined porphyry Cu-Mo resources. These chalcophile, siderophile, and lithophile critical minerals, often undetectable in ore, are concentrated (hundreds of parts per million to percents) in slimes and electrolyte during copper electrorefining or could be recovered, in part, during sulfide concentration and smelting. Other than rhenium (recovered during molybdenum refining) and tellurium, all have been routinely discarded. Subsidization (for example, commodity price guarantees, tax credits, recovery technology development), political initiative, and (or) sustained market favorability could support new production of critical mineral commodities from subduction-related magmatic-hydrothermal deposits in Western States. In addition, insufficient domestic refining capacity could relegate the large inventories of critical minerals in porphyry Cu-Mo reserves and resources (for example, Pebble, Alaska; Resolution and Copper World [Rosemont], Arizona) to exportation in concentrates and importation insecurity, fortifying their present status.

Scientific Investigations Report↗

Effects of land use and retention practices on sediment yields in the Stony Brook basin, New Jersey

The average annual rate of suspended-sediment discharge of the Stony Brook at Princeton, N.J. (44.5 square miles) is about 8,800 tons, or 200 tons per square mile. Annual yields within the basin, which is in the Piedmont Lowlands section of the Piedmont physiographic province in west-central New Jersey, range from 25 to 400 tons per square mile. Storm runoff that transports suspended materials in excess of a ton carries 90 percent of the total suspended-sediment discharge from the basin. Observations of particlesize distributions indicate that the suspended material carried during storms is 55 percent silt, 40 percent clay, and 5 percent sand. A trend analysis of sediment records collected at Princeton between 1956 and 1970 indicated an increase in suspended-sediment discharge per unit of water discharge during 1956-61. From early 1962 to late 1967, sediment trends were difficult to interpret owing to complicating factors, such as reservoir construction, urbanization, and extreme drought. After 1967, yields decreased. Variations in sediment yields during the study are attributed to the integrated influence of several factors. A 2.9 percent decrease in croplands and an increase of 5.1 percent in idle and urban land use probably produced a net increase in sediment yields. Construction of seven sediment-retention reservoirs under Public Law 566 resulted in temporary increases in sediment yields. However, based on a trap-efficiency investigation at 1 site, the combined effect of operation of these 7 reservoirs is estimated to result in a 20 percent reduction in sediment discharge from the basin. Other factors that influence the noted decrease include reduction in yields during 5 years of drought, 1962-66, and reduced construction and development during the latter part of the study period resulting from a general economic slowdown.

Water Supply Paper↗

Surface-Water Quality and Nutrient Loads in the Nepaug Reservoir Watershed, Northwestern Connecticut, 1999-2001

Water quality was characterized at three tributary watersheds to the Nepaug Reservoir-Nepaug River, Phelps Brook, and Clear Brook-from October 1998 through September 2001 to document existing water-quality conditions and evaluate potential future effects of the removal of sand and gravel from areas of the watershed. Some removal operations may include removal of vegetation and top soil and steepening of slopes. Routine water samples collected monthly in all three watersheds were analyzed for nutrients, organic carbon, major ions, and fecal indicator bacteria. Results of the analyses indicate that, in general, the water quality in all three tributary watersheds is good and meets standards established for drinking-water supplies for nitrate, but does not always meet contact-recreation standards for bacteria. Median concentrations of total nitrogen, total phosphorus, and total organic carbon were highest in the routine monthly samples from Phelps Brook and lowest from Clear Brook. Samples also were collected during selected storms to examine changes in concentrations of nutrients during periods of high streamflow. The maximum values measured for total nitrogen, total phosphorus, and total organic carbon were in storm samples from Clear Brook. The Nepaug River watershed delivered the largest loads of total nitrogen, total phosphorus, and total organic carbon to the reservoir. Yields of nutrients and organic carbon differed significantly from year to year and among the three watersheds. Yields of total nitrogen and total organic carbon were largest from Phelps Brook and smallest from Clear Brook. The yields of total phosphorus were largest from Nepaug River and smallest from Phelps Brook. In comparison to other watersheds in Connecticut, annual loads and yields from the three streams were lower than those of developed urban areas and comparable to those of other rural and forested basins. Delivery of nutrients and organic carbon to the reservoir took place mostly during the spring with the exception of those constituents delivered during Tropical Storm Floyd, a large fall storm.

Scientific Investigations Report↗

Computation and analysis of the instantaneous-discharge record for the Colorado River at Lees Ferry, Arizona — May 8, 1921, through September 30, 2000

A gaging station has been operated by the U.S. Geological Survey at Lees Ferry, Arizona, since May 8, 1921. In March 1963, Glen Canyon Dam was closed 15.5 miles upstream, cutting off the upstream sediment supply and regulating the discharge of the Colorado River at Lees Ferry for the first time in history. To evaluate the pre-dam variability in the hydrology of the Colorado River, and to determine the effect of the operation of Glen Canyon Dam on the downstream hydrology of the river, a continuous record of the instantaneous discharge of the river at Lees Ferry was constructed and analyzed for the entire period of record between May 8, 1921, and September 30, 2000. This effort involved retrieval from the Federal Records Centers and then synthesis of all the raw historical data collected by the U.S. Geological Survey at Lees Ferry. As part of this process, the peak discharges of the two largest historical floods at Lees Ferry, the 1884 and 1921 floods, were reanalyzed and recomputed. This reanalysis indicates that the peak discharge of the 1884 flood was 210,000±30,000 cubic feet per second (ft 3 /s), and the peak discharge of the 1921 flood was 170,000±20,000 ft 3 /s. These values are indistinguishable from the peak discharges of these floods originally estimated or published by the U.S. Geological Survey, but are substantially less than the currently accepted peak discharges of these floods. The entire continuous record of instantaneous discharge of the Colorado River at Lees Ferry can now be requested from the U.S. Geological Survey Grand Canyon Monitoring and Research Center, Flagstaff, Arizona, and is also available electronically at http://www.gcmrc.gov. This record is perhaps the longest (almost 80 years) high-resolution (mostly 15- to 30-minute precision) times series of river discharge available. Analyses of these data, therefore, provide an unparalleled characterization of both the natural variability in the discharge of a river and the effects of dam operations on a river. Following the construction and quality-control checks of the continuous record of instantaneous discharge, analyses of flow duration, sub-daily flow variability, and flood frequency were conducted on the pre- and post-dam parts of the record. These analyses indicate that although the discharge of the Colorado River varied substantially prior to the closure of Glen Canyon Dam in 1963, operation of the dam has caused changes in discharge that are more extreme than the pre-dam natural variability. Operation of the dam has eliminated flood flows and base flows, and thereby has effectively "flattened" the annual hydrograph. Prior to closure of the dam, the discharge of the Colorado River at Lees Ferry was lower than 7,980 ft 3 /s half of the time. Discharges lower than about 9,000 ft 3 /s were important for the seasonal accumulation and storage of sand in the pre-dam river downstream from Lees Ferry. The current operating plan for Glen Canyon Dam no longer allows sustained discharges lower than 8,000 ft 3 /s to be released. Thus, closure of the dam has not only cut off the upstream supply of sediment, but operation of the dam has also largely eliminated discharges during which sand could be demonstrated to accumulate in the river. In addition to radically changing the hydrology of the river, operation of the dam for hydroelectric-power generation has introduced large daily fluctuations in discharge. During the pre-dam era, the median daily range in discharge was only 542 ft 3 /s, although daily ranges in discharge exceeding 20,000 ft 3 /s were observed during the summer thunderstorm season. Relative to the pre-dam period of record, dam operations have increased the daily range in discharge during all but 0.1 percent of all days. The post-dam median daily range in discharge, 8,580 ft 3 /s, exceeds the pre-dam median discharge of 7,980 ft 3 /s. Operation of the dam has also radically changed the frequency of floods on the Colorado River at Lees Ferry. The frequency of floods with peak discharges larger than about 29,000 ft 3 /s has greatly decreased, while the frequency of smaller floods, with peak discharges between 18,500 and 29,000 ft 3 /s, has increased substantially. Operation of the dam has greatly extended the duration of smaller floods; for example, each of the four longest periods of sustained flows in excess of 18,500 ft 3 /s occurred after closure of the dam.

Arizona↗

Wind River subbasin restoration annual report of USGS activities January 2017 through December 2017

We used Passive Integrated Transponder (PIT)-tagging and a series of instream PIT-tag interrogation systems (PTISs) to investigate life-histories, populations, and efficacy of habitat restoration actions for wild Steelhead Oncorhynchus mykiss in the Wind River subbasin, WA. No hatchery Steelhead have been planted in the Wind River subbasin since 1997, and hatchery adults are estimated to be less than one percent of adults in most years (pers comm. Thomas Buehrens, Washington Department of Fish and Wildlife). Numerous restoration actions have been implemented in the subbasin, including Hemlock Dam removal on Trout Creek in 2009. Data from our study, and companion work by Washington Department of Fish and Wildlife (WDFW), are contributing to Bonneville Power Administration’s (BPA) Research Monitoring and Evaluation (RM&E) Program Strategy of Fish Population Status Monitoring (www.cbfish.org/ProgramStrategy.mvc/ViewProgramStrategySummary/1), specifically the substrategies of: 1) Assessing the Status and Trends of Diversity of Natural Origin Fish Populations and to Uncertainties Research regarding differing life histories of a wild Steelhead population, 2) Assessing the Status and Trend of Adult Natural Origin Fish Populations, and 3) Monitoring and Evaluating the Effectiveness of Tributary Habitat Actions Relative to Environmental, Physical, or Biological Performance Objectives. Our headwaters parr PIT tagging, WDFW parr, smolt, and adult tagging and our instream PTISs are providing data movements and life histories of parr, smolt, and adult Steelhead. During summer 2017, we PIT-tagged age-0 and age-1 Steelhead parr in headwater areas of the Wind River subbasin to characterize population traits and investigate life-history diversity, including growth and pre-smolt downstream movement. Repeat sampling and smolt traps provide opportunities for recapture, and instream PTISs and Columbia River infrastructure provide opportunity for detection of PIT-tagged fish. Throughout the year, we maintained a series of instream PTISs to monitor movement of tagged Steelhead parr, smolts, and adults. This included adding the second array to our upper Wind River PITS, increasing solar capacity and adding improved power cables to some sites. Detections at the instream PTISs have demonstrated trends of age-0 and age-1 parr emigration from natal areas during summer and fall, in addition to the expected movement of parr and smolts in spring. These data are increasing our understanding of varied life histories of juvenile Steelhead; paired with other Steelhead population work in the subbasin we hope to begin to understand factors which may influence parr movements. Long-term monitoring of PIT-tagged fish over multiple years is providing information on contribution of various life-history strategies to smolt production and adult returns. Movements of PIT-tagged adult Steelhead were also recorded at instream PTISs. These data have allowed us to assess adult returns to tributary watersheds within the Wind River subbasin. Determination of adult use of tributary watersheds is providing data to contribute to evaluation of the efficacy of the removal of Hemlock Dam on Trout Creek. Hemlock Dam, located at rkm 2.0 of Trout Creek was removed in summer 2009. The dam had had contributed to hydrologic impairment of Trout Creek and had potential negative effects on Steelhead. The improved upper Wind River PTIS (better site characteristics and grid power) will allow estimates of subbasin adult escapement upstream of that site. Evaluating and planning restoration efforts are of interest to many managers and agencies to ensure efficient use of resources. The evaluation of various life-histories of Lower Columbia River Steelhead within the Wind River subbasin will provide information to better track populations, and to direct habitat restoration and water allocation planning. Increasingly detailed Viable Salmonid Population information, such as that provided by PIT-tagging and instream PTISs networks like those we operate in the Wind River subbasin, will provide data to inform policy and management, as life-history strategies and production bottlenecks are identified and understood.

Washington↗

Trends in major-ion constituents and properties for selected sampling sites in the Tongue and Powder River watersheds, Montana and Wyoming, based on data collected during water years 1980-2010

The primary purpose of this report is to present information relating to flow-adjusted temporal trends in major-ion constituents and properties for 16 sampling sites in the Tongue and Powder River watersheds based on data collected during 1980–2010. In association with this primary purpose, the report presents background information on major-ion characteristics (including specific conductance, calcium, magnesium, potassium, sodium adsorption ratio, sodium, alkalinity, chloride, fluoride, dissolved sulfate, and dissolved solids) of the sampling sites and coal-bed methane (CBM) produced water (groundwater pumped from coal seams) in the site watersheds, trend analysis methods, streamflow conditions, and factors that affect trend results. The Tongue and Powder River watersheds overlie the Powder River structural basin (PRB) in northeastern Wyoming and southeastern Montana. Limited extraction of coal-bed methane (CBM) from the PRB began in the early 1990’s, and increased dramatically during the late 1990’s and early 2000’s. CBM-extraction activities produce discharges of water with high concentrations of dissolved solids (particularly sodium and bicarbonate ions) relative to most stream water in the Tongue and Powder River watersheds. Water-quality of CBM produced water is of concern because of potential effects of sodium on agricultural soils and potential effects of bicarbonate on aquatic biota. Two parametric trend-analysis methods were used in this study: the time-series model (TSM) and ordinary least squares regression (OLS) on time, streamflow, and season. The TSM was used to analyze trends for 11 of the 16 study sites. For five sites, data requirements of the TSM were not met and OLS was used to analyze trends. Two primary 10-year trend-analysis periods were selected. Trend-analysis period 1 (water years 1986–95; hereinafter referred to as period 1) was selected to represent variability in major-ion concentrations in the Tongue and Powder River watersheds before potential effects of CBM-extraction activities. Trend analysis period 2 (water years 2001–10; hereinafter referred to as period 2) was selected because it encompassed substantial CBM-extraction activities and therefore might indicate potential effects of CBM-extraction activities on water quality of receiving streams in the Tongue and Powder River watersheds. For sites that did not satisfy data requirements for the TSM, OLS was used to analyze trends for period 2 (if complete data were available) or a 6-year period (2005–10). Flow-rate characteristics of CBM-produced water were estimated to allow general comparisons with streamflow characteristics of the sampling sites. The information on flow-rate characteristics of CBM-produced water in relation to streamflow does not account for effects of disposal, treatment, or other remediation activities on the potential quantitative effects of CBM-produced water on receiving streams. In many places, CBM-produced water is discharged into impoundments or channels in upper reaches of tributary watersheds where water infiltrates and does not directly contribute to streamflow. For Tongue River at State line (site 4) mean annual pumping rate of CBM-produced water during water years 2001–10 (hereinafter referred to as mean CBM pumping rate) was 6 percent of the mean of annual median streamflows during water years 2001–10 (hereinafter referred to as 2001–10 median streamflow). For main-stem Tongue River sites 5, 7, and 10, mean CBM pumping rate was 8–12 percent of 2001–10 median streamflow. For main-stem Powder River sites (sites 12, 13, and 16), mean CBM pumping rates were 26, 28, and 34 percent of 2001–10 median streamflows, respectively. For main-stem Tongue River sites analyzed by using the TSM and downstream from substantial CBM-extraction activities [Tongue River at State line (site 4), Tongue River at Tongue River Dam (site 5), Tongue River at Birney Day School (site 7), and Tongue River at Miles City (site 10)], generally small significant or nonsignificant decreases in most constituents are indicated for period 1. For period 2 for these sites, the TSM trend results do not allow confident conclusions concerning detection of effects of CBM-extraction activities on stream water quality. Detection of significant trends in major-ion constituents and properties for period 2 generally was infrequent, and direction, magnitudes, and significance of fitted trends were not strongly consistent with relative differences in water quality between stream water and CBM-produced water. The TSM indicated significant or generally large magnitude increases in median values of sodium adsorption ratio (SAR), sodium, and alkalinity for period 2 for sites 5 and 7, which might indicate potential effects of CBM-extraction activities on stream water. However, other factors, including operations of Tongue River Reservoir, irrigation activities, contributions of saline groundwater, and operations of the Decker coal mine, confound confident determination of causes of detected significant trends for sites 5 and 7. For all mainstem Tongue River sites, trends for period 2 generally are within ranges of those for period 1 before substantial CBM-extraction activities. For main-stem Powder River sites analyzed by using the TSM [Powder River at Sussex (site 11), Powder River at Arvada (site 12), Powder River at Moorhead (site 13), and Powder River near Locate (site 16)], significant or generally large magnitude decreases in median values of SAR, sodium, estimated alkalinity, chloride, fluoride, specific conductance, and dissolved solids are indicated for period 1. Patterns in trend results for period 1 for main-stem Powder River sites are consistent with effects of Salt Creek oil-brine reinjection that started in 1990. Trend results for all main-stem Powder River sites downstream from substantial CBM-extraction activities (sites 12, 13, and 16) indicate evidence of potential effects of CBM-extraction activities on stream water quality, although evidence is stronger for sites 12 and 13 than for site 16. Evidence in support of potential CBM effects includes significant increases in median values of SAR, sodium, and estimated alkalinity for period 2 for sites 12, 13, and 16 that are consistent with relative differences between stream water and CBM-produced water. Significant increases in median values of these constituents for period 2 are not indicated for Powder River at Sussex (site 11) upstream from substantial CBM-extraction activities. In interpreting the trend results, it is notable that the fitted trends evaluate changes in median concentrations and also notable that changes in median concentrations that might be attributed to CBM-extraction activities probably are more strongly evident during low to median streamflow conditions than during mean to high streamflow conditions. This observation is relevant in assessing trend results in relation to specific water-quality concerns, including effects of water-quality changes on irrigators and effects on stream biota and ecology.

Montana;Wyoming↗

Hydrogeology and simulation of groundwater flow in fractured-rock aquifers of the Piedmont and Blue Ridge Physiographic Provinces, Bedford County, Virginia

An annual groundwater budget was computed as part of a hydrogeologic characterization and monitoring effort of fractured-rock aquifers in Bedford County, Virginia, a growing 764-square-mile (mi 2 ) rural area between the cities of Roanoke and Lynchburg, Virginia. Data collection in Bedford County began in the 1930s when continuous stream gages were installed on Goose Creek and Big Otter River, the two major tributaries of the Roanoke River within the county. Between 2006 and 2014, an additional 2 stream gages, 3 groundwater monitoring wells, and 12 partial-record stream gages were operated. Hydrograph separation methods were used to compute base-flow recharge rates from the continuous data collected from the continuous stream gages. Mean annual base-flow recharge ranged from 8.3 inches per year (in/yr) for the period 1931&ndash;2012 at Goose Creek near Huddleston (drainage area 188 mi 2 ) to 9.3 in/yr for the period 1938&ndash;2012 at Big Otter River near Evington (drainage area 315 mi 2 ). Mean annual base-flow recharge was estimated to be 6.5 in/yr for the period 2007&ndash;2012 at Goose Creek at Route 747 near Bunker Hill (drainage area 125 mi 2 ) and 8.9 in/yr for the period 2007&ndash;2012 at Big Otter River at Route 221 near Bedford (drainage area 114 mi 2 ). Base-flow recharge computed from the partial-record data ranged from 5.0 in/yr in the headwaters of Goose Creek to 10.5 in/yr in the headwaters of Big Otter River. A steady-state groundwater-flow simulation for Bedford County was developed to test the conceptual understanding of flow in the fractured-rock aquifers and to compute a groundwater budget for the four major drainages: James River, Smith Mountain and Leesville Lakes, Goose Creek, and Big Otter River. Model results indicate that groundwater levels mimic topography and that minimal differences in aquifer properties exist between the Proterozoic basement crystalline rocks and Late Proterozoic-Cambrian cover crystalline rocks. The Big Otter River receives 40.8 percent of the total daily groundwater outflow from fractured-rock aquifers in Bedford County; Goose Creek receives 25.8 percent, the James River receives 18.2 percent, and Smith Mountain and Leesville Lakes receive 15.2 percent. The remaining percentage of outflow is attributed to pumping from the aquifer (consumptive use).

Virginia↗

Comparison of methods for estimating ground-water recharge and base flow at a small watershed underlain by fractured bedrock in the Eastern United States

This study by the U.S. Geological Survey (USGS), in cooperation with the Agricultural Research Service (ARS), U.S. Department of Agriculture, compared multiple methods for estimating ground-water recharge and base flow (as a proxy for recharge) at sites in east-central Pennsylvania underlain by fractured bedrock and representative of a humid-continental climate. This study was one of several within the USGS Ground-Water Resources Program designed to provide an improved understanding of methods for estimating recharge in the eastern United States. Recharge was estimated on a monthly and annual basis using four methods?(1) unsaturated-zone drainage collected in gravity lysimeters, (2) daily water balance, (3) water-table fluctuations in wells, and (4) equations of Rorabaugh. Base flow was estimated by streamflow-hydrograph separation using the computer programs PART and HYSEP. Estimates of recharge and base flow were compared for an 8-year period (1994-2001) coinciding with operation of the gravity lysimeters at an experimental recharge site (Masser Recharge Site) and a longer 34-year period (1968-2001), for which climate and streamflow data were available on a 2.8-square-mile watershed (WE-38 watershed). Estimates of mean-annual recharge at the Masser Recharge Site and WE-38 watershed for 1994-2001 ranged from 9.9 to 14.0 inches (24 to 33 percent of precipitation). Recharge, in inches, from the various methods was: unsaturated-zone drainage, 12.2; daily water balance, 12.3; Rorabaugh equations with PULSE, 10.2, or RORA, 14.0; and water-table fluctuations, 9.9. Mean-annual base flow from streamflow-hydrograph separation ranged from 9.0 to 11.6 inches (21-28 percent of precipitation). Base flow, in inches, from the various methods was: PART, 10.7; HYSEP Local Minimum, 9.0; HYSEP Sliding Interval, 11.5; and HYSEP Fixed Interval, 11.6. Estimating recharge from multiple methods is useful, but the inherent differences of the methods must be considered when comparing results. For example, although unsaturated-zone drainage from the gravity lysimeters provided the most direct measure of potential recharge, it does not incorporate spatial variability that is contained in watershed-wide estimates of net recharge from the Rorabaugh equations or base flow from streamflow-hydrograph separation. This study showed that water-level fluctuations, in particular, should be used with caution to estimate recharge in low-storage fractured-rock aquifers because of the variability of water-level response among wells and sensitivity of recharge to small errors in estimating specific yield. To bracket the largest range of plausible recharge, results from this study indicate that recharge derived from RORA should be compared with base flow from the Local-Minimum version of HYSEP.

Scientific Investigations Report↗

Geohydrologic site characterization of the municipal solid waste landfill facility, U.S. Army Air Defense Artillery Center and Fort Bliss, El Paso County, Texas

Geohydrologic conditions of the Municipal Solid Waste Landfill Facility (MSWLF) on the U.S. Army Air Defense Artillery Center and Fort Bliss, El Paso County, Texas, were evaluated by the U.S. Geological Survey in cooperation with the U.S. Army. The 106.03-acre MSWLF has been in operation since January 1974. The landfill contains household refuse, Post solid wastes, bulky items, grass and tree trimmings from family housing, refuse from litter cans, construction debris, classified waste (dry), dead animals, asbestos, and empty oil cans. The MSWLF, located about 1,200 feet east of the nearest occupied structure, is estimated to receive an average of approximately 56 tons of municipal solid waste per day and, at a fill rate of 1-4 acres per year, is expected to reach its capacity by the year 2004. The MSWLF is located in the Hueco Bolson, 4 miles east of the Franklin Mountains. Elevations at the MSWLF range from 3,907 to 3,937 feet above sea level. The climate at the MSWLF and vicinity is arid continental, characterized by an abundance of sunny days, high summer temperatures, relatively cool winters typical of arid areas, scanty rainfall, and very low humidity throughout the year. Average annual temperature near the MSWLF and vicinity is 63.3 degrees Fahrenheit and annual precipitation is 7.8 inches. Potential evaporation in the El Paso area was estimated to be 65 inches per year. Soils at and adjacent to the MSWLF are nearly level to gently sloping, have a fine sandy loam subsoil, and are moderately deep over caliche. The MSWLF is underlain by Hueco Bolson deposits of Tertiary age and typically are composed of unconsolidated to slightly consolidated interbedded sands, clay, silt, gravel, and caliche. Individual beds are not well defined and range in thickness from a fraction of an inch to about 100 feet. The primary source of ground water in the MSWLF area is in the deposits of the Hueco Bolson. A relatively thick vadose zone of approximately 300 feet overlies the aquifer of the Hueco Bolson deposits in the vicinity of the MSWLF. A deep water table prevails for all of the study area. Whether any perched water zones exist below the MSWLF is unknown. Under current conditions, extensive ground-water development by the City of El Paso encompasses the MSWLF. Hydraulic characteristics of the Hueco Bolson vary significantly as a result of the nonuniform nature of the individual beds. Wells in the vicinity of the MSWLF range in depth from about 600 feet to greater than 1,200 feet. Recharge resulting from direct infiltration of precipitation is minor due to the high evaporation and low precipitation rates. The hydraulic gradient in the vicinity of the MSWLF is generally to the south but may vary due to pumpage of a well located on the northeast corner of the perimeter boundary. Ground-water monitoring data for the MSWLF vicinity show a water-level decline of 55.65 feet from November 1958 to December 1987. Depth to water at the northeast corner of the MSWLF as of July 26, 1994, was 325.8 feet below land surface. The city-operated Shearman Well Field, located north of the MSWLF, is a primary source of ground water for the City of El Paso. The test-pumping rate of well JL-49-05-914 (the well nearest to the MSWLF having test-pumping data) was 1,972 gallons per minute on July 20, 1992; the static water level prior to pumping was 317.54 feet below land surface. El Paso Water Utilities reports that the pumping level after 8 hours of pumping was 367.80 feet below land surface, resulting in a drawdown of 50.26 feet, transmissivity of 22,200 feet squared per day (166,000 gallons per day per foot), and specific capacity of 39.2 gallons per minute per foot of drawdown. After the well was shut off, the well recovered to a static water level of 317.46 feet below land surface on July 21, 1992. Ground water in the El Paso area is chemically suitable for most uses. El Paso Water Utilities reports that concentrations of dissolved solids in the vicinity of the MSWLF generally range from 297 to 625 milligrams per liter (wells JL-49-05-904 and JL-49-05-915, respectively).

Texas↗

Demographic responses of least terns and piping plovers to the 2011 Missouri River flood—A large-scale case study

A catastrophic flood event on the Missouri River system in 2011 led to substantial changes in abundance and distribution of unvegetated sand habitat. This river system is a major component of the breeding range for interior Least terns ( Sternula antillarum ; “terns”) and piping plovers ( Charadrius melodus ; “plovers”), both of which are Federally listed ground-nesting birds that prefer open, unvegetated sand and gravel nesting substrates on sandbars and shorelines. The 2011 flood inundated essentially all tern and plover nesting habitat during 2011, but it had potential to generate post-flood habitat conditions that favored use by terns and plovers in subsequent years. We compared several tern and plover demographic parameters during the pre-flood and post-flood periods on the Garrison Reach and Lake Sakakawea, North Dakota, to determine how this event influenced these species (both species on the Garrison Reach, and plovers only on Lake Sakakawea). The principal parameters we measured (nest survival, chick survival, and breeding population) showed spatial and temporal variation typical of opportunistic species occupying highly variable habitats. There was little evidence that nest survival of least terns differed between pre- and post-flood. During 2012 when habitat was most abundant on the Garrison Reach and Lake Sakakawea, piping plover nest survival was higher than in any other year in the study, but returned to rates comparable to pre-flood years in 2013. Chick survival for terns on the Garrison Reach and plovers on Lake Sakakawea showed a similar pattern to plover nest survival, with the 2012 rate exceeding all other years of the study, and the remaining pre-flood and post-flood years being generally similar but slightly higher in post-flood years. However, plover chick survival on the Garrison Reach in 2012 was similar to pre-flood years, and increased annually thereafter to its highest rate in 2014. Although wide confidence intervals precluded firm conclusions about flood effects on breeding populations, the general pattern suggested lower populations of plovers but higher populations of least terns immediately after the flood. Despite near total absence of breeding habitat on either study area during the flood of 2011, populations of both species persisted after the flood due to their propensity to disperse and/or forgo breeding for at least a year. Tern and plover populations have similarly persisted and recovered after the flood, but their mechanisms for persistence likely differ. Data on tern dispersal is generally lacking, but they are thought to show little fidelity to their natal grounds, have a propensity to disperse potentially long distances, and routinely forgo breeding until their second year, thus a lost opportunity to breed in a given area may be easily overcome. Plovers exhibit stronger demographic ties to the general area in which they previously nested, yet they occupy much broader nesting habitat features than terns and exploit three major landforms in the Dakotas (free-flowing rivers, reservoir shorelines, and wetland shorelines). Consequently, dispersal to and from non-Missouri River habitats and potential to exploit non-traditional habitats likely sustained the Northern Great Plains population through the flood event. Terns and plovers normally occupy similar habitats on the Missouri River and both species experienced similar loss of a breeding season due to the flood. Persistence of these populations after the flood underscores the importance of understanding their unique demographic characteristics and the context within which the Missouri River operates.

North Dakota↗

Trends in nutrient concentration and load for streams in the Mississippi River Basin, 1974-94

Trends in nutrient concentration and load are computed for 40 stations on 24 streams in the Mississippi River Basin. The drainage area of the Mississippi Basin covers about 42 percent of the conterminous United States, and the Mississippi River discharges about 420 billion gallons per day of freshwater to the Gulf of Mexico. The period for which trends are analyzed varies for each station but generally comprises water years 1974&ndash;94. Stations included in this analysis are part of the National Stream Quality Accounting Network operated by the U.S. Geological Survey. LOWESS (LOcally WEighted Scatterplot Smoothing) smooth lines superimposed on graphs of flow-adjusted residuals of concentration versus time and load versus time indicate short-term trends for each station. Kendall-Theil robust lines superimposed on the same graphs indicate long-term trends. Long-term trends were evaluated using the slope of the Kendall-Theil robust line and Kendall&rsquo;s tau. Annual loads are estimated with regression analysis and corrected for log-transformation bias with the MVUE (Minimum Variance Unbiased Estimator). Trends in annual streamflow are presented to aid in the interpretation of nutrient trends. Statistically significant long-term increases in flow-adjusted residual concentrations of total nitrogen were detected at 14 stations, decreases were detected at 6 stations, and no significant trends were detected at 20 stations. Statistically significant long-term increases in total nitrogen load were detected at 5 stations, decreases were detected at 4 stations, and no significant trends were detected at 31 stations. Statistically significant long-term increases in flow-adjusted residual concentrations of total phosphorus were detected at 2 stations, decreases were detected at 25 stations, and no significant trends were detected at 13 stations. Statistically significant long-term increases in total phosphorus load were detected at 1 station, decreases were detected at 13 stations, and no significant trends were detected at 26 stations. The mean annual yields were computed from the estimated mean annual loads. Mean annual nitrogen yields are largest for three watersheds in the upper Mississippi Basin; estimated yield of each is greater than 5.0 tons per square mile. Nine stations in the Ohio River Basin have estimated mean annual nitrogen yields greater than 2.0 tons per square mile. Estimated mean annual phosphorus yield is greater than 0.250 ton per square mile at 7 stations, 5 in the Ohio Basin and 2 in the upper Mississippi Basin. Statistically significant trends in annual streamflow were detected at seven stations. Annual streamflow influences trends in load, even when the streamflow trends are not statistically significant.

Mississippi River Basin↗

The Effect of mining and related activities on the sediment-trace element geochemistry of Lake Coeur d'Alene, Idaho, U.S.A.; Part II, Subsurface sediments

During the summer of 1990, 12 gravity cores were collected in Lake Coeur d'Alene, Idaho, at various depths and in a variety of depositional environments. All core subsamples were analyzed to determine bulk chemistry and selected subsamples were analyzed for trace-element partitioning and (137)Cs activity. The purpose of these analyses was to determine the trace-element concentrations and distributions in the sediment column and to try to establish a trace-element geochemical history of the lake in relation to mining and mining-related discharge operations in the area. Substantial portions of the near-surface sediments in Lake Coeur d'Alene are markedly enriched in Ag, As, Cd, Hg, Pb, Sb, and Zn, and somewhat enriched in Cu, Fe, and Mn. Variations in the thickness of the trace element- rich sediments suggest that the source of much of this material is the Coeur d'Alene River. Calculated estimates indicate that there are some 75 million metric tons of trace element-rich sediments currently on/in the lakebed. Estimated trace-element masses in excess of those caused by non-mining-related sources, range from a high of 468,000 metric tons of Pb to a low of 260 metric tons of Hg. The similarity between the trace element-rich surface and subsurface sediments as regards their: (1) location; (2) bulk chemistry; (3) interelement relationships; and (4) trace-element partitioning indicate that the sources and/or concentrating mechanisms causing the trace-element enrichment in the lake probably have been the same throughout their depositional history. Based on Mt. St. Helens' ash layer from the 1980 eruption, ages estimated from (137)Cs activity, and the presence of 80 discernible and presumably annual layers in a core collected near the Coeur d'Alene River delta, it appears that deposition rates for the trace element-rich sediments varied from 2.1 to 1.3 cm/yr. These data also indicate that the deposition of trace element-rich sediments began, at least in the Coeur d'Alene River delta, sometime between 1895 and 1910, dates consistent with the onset of mining and ore-processing activities in the area which began in the 1880's.

Open-File Report↗

Environmental Setting of the Morgan Creek Basin, Maryland, 2002-04

The Morgan Creek Basin is a 31-square-kilometer watershed in Kent County, Maryland on the Delmarva Peninsula. The Delmarva Peninsula covers about 15,500 square kilometers and includes most of the State of Delaware and parts of Maryland and Virginia east of the Chesapeake Bay. The Morgan Creek Basin is one of five sites selected for the study of sources, transport, and fate by the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program's: Agricultural Chemicals: Sources, Transport and Fate study team (Agricultural Chemicals Team, ACT). A key component of the study is identifying the natural factors and human influences affecting water quality in the Morgan Creek Basin. The Morgan Creek Basin is in the Coastal Plain Physiographic Province, which is a nearly level seaward-sloping lowland with areas of moderate topographic relief. The study area lies within a well-drained upland region with permeable and porous soils and aquifer sediments. The soils are well suited to most field crops. Agriculture is the principal land use in the Morgan Creek Basin, as well as throughout the entire Delmarva Peninsula. Most agricultural land is used for row crops such as corn, soybeans, and small grains, and slightly less land is used for pasture and hay production involving alfalfa, clover, and various perennial grasses. There are several animal operations in the study area. Farm management practices include fertilizer and herbicide applications, different tillage practices, addition of lime, forested riparian buffers, grassed waterways, and sediment retention ponds. Irrigation in the study area is minimal. The climate of the Morgan Creek Basin is humid and subtropical, with an average annual precipitation of 1.12 meters. Overall annual precipitation is evenly distributed throughout the year, from 76 to 101 millimeters per month; however, the spring and summer (March - September) tend to be slightly wetter than the autumn and winter (October - February). Anomalously high precipitation can occur in summer/early autumn due to occasional hurricanes and tropical storms. Thunderstorms can also produce relatively high localized precipitation over the Morgan Creek Basin during the summer months. Mean daily streamflows for Morgan Creek are highly variable, and somewhat flashy due to the relatively small area of the basin. The long-term median base flow for Morgan Creek is 59 percent of total flow, indicating that total streamflow is most often dominated by a sustained ground-water contribution. Surface runoff accounts for the other 41 percent of the water in total streamflow and dominates during and just after precipitation events. The surficial aquifer in the study area consists of permeable quartz-rich sand and gravel and is underlain by less permeable marine sand, silt, and clay. The depth to water table ranges from less than 0.4 meters below land surface in the floodplain to 12 meters below land surface in upland areas. Ground water generally flows from uplands toward the Morgan Creek floodplain at a variety of depths and time scales. Because the soils and sediments are permeable and porous, some fraction of chemicals applied to the land surface tend to move downward to the water table where they are transported to discharge areas near Morgan Creek.

Open-File Report↗

Estimates of ground-water pumpage from the Yakima River Basin aquifer system, Washington, 1960-2000

Ground-water pumpage in the Yakima River Basin, Washington, was estimated for eight categories of use for 1960-2000 as part of an investigation to assess groundwater availability in the basin. Methods used, pumpage estimates, reliability of the estimates, and a comparison with appropriated quantities are described. The eight categories of pumpage were public water supply, self-supplied domestic (exempt wells), irrigation, frost protection, livestock and dairy operations, industrial and commercial, fish and wildlife propagation, and ground-water claims. Pumpage estimates were based on methods that varied by the category and primarily represent pumpage for groundwater rights. Washington State Department of Ecology’s digital database has 2,874 active ground-water rights in the basin that can withdraw an annual quantity of about 529,231 acre-feet during dry years. Irrigation rights are for irrigation of about 129,570 acres. All but 220 of the rights were associated with well drillers’ logs, allowing for a spatial representation of the pumpage. Five-hundred and sixty of the irrigation rights were estimated to be standby/reserve rights. During this study, another 30 rights were identified that were not in the digital database. These rights can withdraw an annual quantity of about 20,969 acre-feet; about 6,700 acre-feet of these rights are near but outside the basin. In 1960, total annual pumpage in the basin, excluding standby/reserve pumpage, was about 115,776 acre-feet. By 2000, total annual pumpage was estimated to be 395,096 acre-feet, and excluding the standby/reserve rights, the total was 312,284 acre-feet. Irrigation accounts for about 60 percent of the pumpage, followed by public water supply at about 12 percent. The smallest category of pumpage was for livestock use with pumpage estimated to be 6,726 acre-feet. Total annual pumpage in 2000 was about 430 cubic feet per second, which is about 11 percent of the surface-water demand. Maximum pumpage is in July and August and during 2000, was about 100 cubic feet per second each month averaged over the Yakima River Basin aquifer system. During 2000, non-standby/reserve pumpage associated with ground-water rights was estimated to total 253,454 acre-feet, or about 198,290 acre-feet less than the appropriated quantity. The unused part of the appropriated value is about equivalent to the irrigation pumpage for primary rights.

Washington↗

Application of the Systems Impact Assessment Model (SIAM) to fishery resource issues in the Klamath River, California

At the request of two offices of the U.S. Fish and Wildlife Service (FWS) located in Yreka and Arcata, Calif., we applied the Systems Impact Assessment Model (SIAM) to analyze a variety of water management concerns associated with the Federal Energy Regulatory Commission (FERC) relicensing of the Klamath hydropower projects or with ongoing management of anadromous fish stocks in the mainstem Klamath River, Oregon and California. Requested SIAM analyses include predicted effects of reservoir withdrawal elevations, use of full active storage in Copco and Iron Gate Reservoirs to augment spring flows, and predicted spawning and juvenile outmigration timing of fall Chinook salmon. In an effort to further refine the analysis of spring flow effects on predicted fall Chinook production, additional SIAM analyses were performed for predicted response to spring flow release variability from Iron Gate Dam, high and low pulse flow releases, the predicted effects of operational constraints for both Upper Klamath Lake water surface elevations, and projected flow releases specified in the Klamath Project 2006 Operations Plan (April 10, 2006). Results of SIAM simulations to determine flow and water temperature relationships indicate that up to 4 degrees C of thermal variability can be attributed to flow variations, but the effect is seasonal. Much more of thermal variability can be attributed to air temperature variations, up to 6 degrees C. Reservoirs affect the annual thermal signature by delaying spring warming by about 3 weeks and fall cooling by about 2 weeks. Multi-level release outlets on Iron Gate Dam would have limited utility; however, if releases are small (700 cfs) and a near-surface and bottom-level outlet could be blended, then water temperature may be reduced by 2-4 degrees C for a 4-week period during September. Using the full active storage in Copco and Iron Gate Reservoir, although feasible, had undesirable ramifications such as earlier spring warming, loss of hydropower production, and inability to re-fill the reservoirs without causing shortages elsewhere in the system. Altering spawning and outmigration timing may be important management objectives for the salmon fishery, but difficult to implement. SIAM predicted benefits that might occur if water temperature was cooler in fall and spring emergence was advanced; however, model simulations were based on purely arbitrary thermal reductions. Spring flow variability did indicate that juvenile fall Chinook rearing habitat was the major biological 'bottleneck' for year class success. Rearing habitat is maximal in a range between 4,500 and 5,500 cfs below Iron Gate Dam. These flow levels are not typically provided by Klamath River system operations, except in very wet years. The incremental spring flow analysis provided insight into when and how long a pulse flow should occur to provide predicted fall Chinook salmon production increases. In general, March 15th - April 30th of any year was the period for pulse flows and 4000 cfs was the target flow release that provided near-optimal juvenile rearing habitat. Again, competition for water resources in the Klamath River Basin may make implementation of pulsed flows difficult.

California, Oregon↗