Search USGS⌕ Search

SEARCH · Search USGS

Results for “Chemistry Select”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30Linked to original sources

Environmental drivers of differences in microbial community structure in crude oil reservoirs across a methanogenic gradient

Stimulating in situ microbial communities in oil reservoirs to produce natural gas is a potentially viable strategy for recovering additional fossil fuel resources following traditional recovery operations. Little is known about what geochemical parameters drive microbial population dynamics in biodegraded, methanogenic oil reservoirs. We investigated if microbial community structure was significantly impacted by the extent of crude oil biodegradation, extent of biogenic methane production, and formation water chemistry. Twenty-two oil production wells from north central Louisiana, USA, were sampled for analysis of microbial community structure and fluid geochemistry. Archaea were the dominant microbial community in the majority of the wells sampled. Methanogens, including hydrogenotrophic and methylotrophic organisms, were numerically dominant in every well, accounting for, on average, over 98% of the total Archaea present. The dominant Bacteria groups were Pseudomonas, Acinetobacter , Enterobacteriaceae, and Clostridiales, which have also been identified in other microbially-altered oil reservoirs. Comparing microbial community structure to fluid (gas, water, and oil) geochemistry revealed that the relative extent of biodegradation, salinity, and spatial location were the major drivers of microbial diversity. Archaeal relative abundance was independent of the extent of methanogenesis, but closely correlated to the extent of crude oil biodegradation; therefore, microbial community structure is likely not a good sole predictor of methanogenic activity, but may predict the extent of crude oil biodegradation. However, when the shallow, highly biodegraded, low salinity wells were excluded from the statistical analysis, no environmental parameters could explain the differences in microbial community structure. This suggests that the microbial community structure of the 5 shallow, up-dip wells was different than the 17 deeper, down-dip wells. Also, the 17 down-dip wells had statistically similar microbial communities despite significant changes in environmental parameters between oil fields. Together, this implies that no single microbial population is a reliable indicator of a reservoir's ability to degrade crude oil to methane, and that geochemistry may be a more important indicator for selecting a reservoir suitable for microbial enhancement of natural gas generation.

Louisiana↗

Uranium distribution in the coastal waters and pore waters of Tampa Bay, Florida

The geochemical reactivity of uranium (238U) and dissolved organic carbon (DOC), Fe, Mn, Ba, and V was investigated in the water column, pore waters, and across a river/estuarine mixing zone in Tampa Bay, Florida. This large estuary is impacted both by diverse anthropogenic activity and by extensive U-rich phosphatic deposits. Thus, the estuarine behavior of uranium may be examined relative to such known U enrichments and anthropogenic perturbations. Dissolved (< 0.45??m) uranium exhibited both removal and enrichment processes across the Alafia River/estuarine mixing zone relative to conservative mixing. Such non-conservative U behavior may be attributed to: i) physical mixing processes within the river; ii) U carrier phase reactivity; and/or iii) fluid exchange processes across sediment/water interface. In the bay proper, U concentrations were ?????2 to 3 times greater than those reported for other estuarine systems and are likely a result of erosional inputs from the extensive, underlying U-rich phosphatic deposits. Whereas dissolved U concentrations generally did not approach seawater values (13.6??nM) along the Alafia River salinity transect, water column U concentrations exceeded 16??nM in select regions of the bay. Within the hydrogeological framework of the bay, such enriched U may also be derived from advective fluid transport processes across the sediment/water interface, such as submarine groundwater discharge (SGD) or hyporheic exchange within coastal rivers. Pore water profiles of U in Tampa Bay show both a flux into and out of bottom sediments, and average, diffusive U pore water fluxes (Jdiff) ranged from - 82.0 to 116.6??mol d- 1. It is likely that negative U fluxes imply seawater entrainment or infiltration (i.e., submarine groundwater recharge), which may contribute to the removal of water column uranium. For comparison, a bay-wide, Ra-derived submarine groundwater discharge estimate for Tampa Bay (8??L m- 2 d- 1) yielded an average, advective (JSGD) U flux of 112.9??mol d- 1. In Tampa Bay, the estuarine distribution of U indicates a strong natural, geologic control that may also be influenced by enhanced fluid transport processes across the sediment/water interface. ?? 2006 Elsevier B.V. All rights reserved.

Marine Chemistry↗

Evaluation of the sensitivity of a federally endangered freshwater mussel (Venustaconcha trabalis) to selected chemicals

Protection of critically endangered species requires identification of factors limiting their survival and growth. Previous studies have demonstrated that unionid mussels are sensitive to some chemicals and the sensitivity was similar among different taxonomic families and tribes of mussels. However, common species of mussels were generally used in these previous studies; little is known about the sensitivity of endangered and threatened mussels relative to common species. The objective of this study was to evaluate the sensitivity of a critically endangered mussel (Tennessee bean, Venustaconcha trabalis ) to seven chemicals with different modes of toxic action (ammonia, chloride, nitrite, potassium, cobalt, manganese, nickel) in acute 96-h exposures and to three chemicals (nitrite, cobalt, iron) in chronic 28-d exposures conducted following standard methods. A commonly tested mussel (fatmucket, Lampsilis siliquoidea ) was also tested side-by-side with Tennessee bean in chronic exposures. Test chemicals were selected based on (1) chemicals of potential concern found in a review of existing data for the river where a population of Tennessee bean occurs or was historically present, (2) chemicals to which other mussels are sensitive, or (3) chemicals that had not been previously tested with mussels. Acute 50% effect concentrations (EC50s) for the seven chemicals from the Tennessee bean tests were within or close to the range of EC50s for other mussel species tested in previous studies, and chronic 20% effect concentrations for the three chemicals were similar between Tennessee bean and fatmucket, indicating the endangered species has sensitivity similar to other tested mussel species. Inclusion of the new mussel data in existing toxicity databases for freshwater organisms would rank one or more mussel species among the four most sensitive species to ammonia, chloride, potassium, and nickel in acute exposures and to nitrite, cobalt, and iron in chronic exposures.

Environmental Toxicology and Chemistry↗

Study and interpretation of the chemical characteristics of natural water

The chemical composition of natural water is derived from many different sources of solutes, including gases and aerosols from the atmosphere, weathering and erosion of rocks and soil, solution or precipitation reactions occurring below the land surface, and cultural effects resulting from activities of man. Some of the processes of solution or precipitation of minerals can be closely evaluated by means of principles of chemical equilibrium including the law of mass action and the Nernst equation. Other processes are irreversible and require consideration of reaction mechanisms and rates. The chemical composition of the crustal rocks of the earth and the composition of the ocean and the atmosphere are significant in evaluating sources of solutes in natural fresh water. The ways in which solutes are taken up or precipitated and the amounts present in solution are influenced by many environmental factors, especially climate, structure and position: of rock strata, and biochemical effects associated with life cycles of plants and animals, both microscopic and macroscopic. Taken all together and in application with the further influence of the general circulation of all water in the hydrologic cycle, the chemical principles and environmental factors form a basis for the developing science of natural-water chemistry. Fundamental data used in the determination of water quality are obtained by the chemical analysis of water samples in the laboratory or onsite sensing of chemical properties in the field. Sampling is complicated by changes in composition of moving water and the effects of particulate suspended material. Most of the constituents determined are reported in gravimetric units, usually milligrams per liter or milliequivalents per liter. More than 60 constituents and properties are included in water analyses frequently enough to provide a basis for consideration of the sources from which each is generally derived, most probable forms of elements and ions in solution, solubility controls, expected concentration ranges and other chemical factors. Concentrations of elements that are commonly present in amounts less than a few tens of micrograms per liter cannot always be easily explained, but present information suggests many are controlled by solubility of hydroxide or carbonate or by sorption on solid particles. Chemical analyses may be grouped and statistically evaluated by averages, frequency distributions, or ion correlations to summarize large volumes of data. Graphing of analyses or of groups of analyses aids in showing chemical relationships among waters, probable sources of solutes, areal water-quality regimen, and water-resources evaluation. Graphs may show water type based on chemical composition, relationships among ions, or groups of ions in individual waters or many waters considered simultaneously. The relationships of water quality to hydrologic parameters, such as stream discharge rate or ground-water flow patterns, can be shown by mathematical equations, graphs, and maps. About 75 water analyses selected from the literature are tabulated to illustrate the relationships described, and some of these, along with many others that are not tabulated, are also utilized in demonstrating graphing and mapping techniques. Relationships of water composition to source rock type are illustrated by graphs of some of the tabulated analyses. Activities of man may modify water composition extensively through direct effects of pollution and indirect results of water development, such as intrusion of sea water in ground-water aquifiers. Water-quality standards for domestic, agricultural, and industrial use have been published by various agencies. Irrigation project requirements for water quality are particularly intricate. Fundamental knowledge of processes that control natural water composition is required for rational management of water quality.

Water Supply Paper↗

Study and interpretation of the chemical characteristics of natural water

The chemical composition of natural water is derived from many different sources of solutes, including gases and aerosols from the atmosphere, weathering and erosion of rocks and soil, solution or precipitation reactions occurring below the land surface, and cultural effects resulting from activities of man. Some of the processes of solution or precipitation of minerals can be closely evaluated by means of principles of chemical equilibrium including the law of mass action and the Nernst equation. Other processes are irreversible and require consideration of reaction mechanisms and rates. The chemical composition of the crustal rocks of the earth and the composition of the ocean and the atmosphere are significant in evaluating sources of solutes in natural fresh water. The ways in which solutes are taken up or precipitated and the amounts present in solution are influenced by many environmental factors, especially climate, structure and position: of rock strata, and biochemical effects associated with life cycles of plants and animals, both microscopic and macroscopic. Taken all together and in application with the further influence of the general circulation of all water in the hydrologic cycle, the chemical principles and environmental factors form a basis for the developing science of natural-water chemistry. Fundamental data used in the determination of water quality are obtained by the chemical analysis of water samples in the laboratory or onsite sensing of chemical properties in the field. Sampling is complicated by changes in composition of moving water and the effects of particulate suspended material. Most of the constituents determined are reported in gravimetric units, usually milligrams per liter or milliequivalents per liter. More than 60 constituents and properties are included in water analyses frequently enough to provide a basis for consideration of the sources from which each is generally derived, most probable forms of elements and ions in solution, solubility controls, expected concentration ranges and other chemical factors. Concentrations of elements that are commonly present in amounts less than a few tens of micrograms per liter cannot always be easily explained, but present information suggests many are controlled by solubility of hydroxide or carbonate or by sorption on solid particles. Chemical analyses may be grouped and statistically evaluated by averages, frequency distributions, or ion correlations to summarize large volumes of data. Graphing of analyses or of groups of analyses aids in showing chemical relationships among waters, probable sources of solutes, areal water-quality regimen, and water-resources evaluation. Graphs may show water type based on chemical composition, relationships among ions, or groups of ions in individual waters or many waters considered simultaneously. The relationships of water quality to hydrologic parameters, such as stream discharge rate or ground-water flow patterns, can be shown by mathematical equations, graphs, and maps. About 75 water analyses selected from the literature are tabulated to illustrate the relationships described, and some of these, along with many others that are not tabulated, are also utilized in demonstrating graphing and mapping techniques. Relationships of water composition to source rock type are illustrated by graphs of some of the tabulated analyses. Activities of man may modify water composition extensively through direct effects of pollution and indirect results of water development, such as intrusion of sea water in ground-water aquifiers. Water-quality standards for domestic, agricultural, and industrial use have been published by various agencies. Irrigation project requirements for water quality are particularly intricate. Fundamental knowledge of processes that control natural water composition is required for rational management of water quality.

Water Supply Paper↗

Effects of sorbate speciation on sorption of selected sulfonamides in three loamy soils

Sorption of sulfamethazine (SMN) and sulfathiazole (STZ) was investigated in three soils, a North Carolina loamy sand, an Iowa sandy loam, and a Missouri loam, under various pH conditions. A significant increase in the sorption coefficient ( K D ) was observed in all three soils, as the sulfonamides converted from an anionic form at higher pH to a neutral/cationic form at lower pH. Above pH 7.5, sulfonamides exist primarily in anionic form and have higher aqueous solubility and no cationic character, thereby consequently leading to lower sorption to soils. The effect of speciation on sorption is not the same for all sulfonamides; it is a function of the pH of the soil and the p K a of the sulfonamides. The results indicate that, for the soils under investigation, SMN has comparatively lower K D values than STZ. The pH-dependent sorption of sulfonamides was observed to be consistent in all three soils investigated. The K D values for each speciated form cationic, neutral, and anionic were calculated using an empirical model in which the species-specific sorption coefficients ( K D0 , K D1 , and K D2 ) were weighted with their respective fractions present at any given pH.

Journal of Agricultural and Food Chemistry↗

Analysis and detection of the herbicides dimethenamid and flufenacet and their sulfonic and oxanilic acid degradates in natural water

Dimethenamid [2-chloro-N-(2,4-dimethyl-3-thienyl)-N-(2-methoxy-1-methylethyl)acetamide] and flufenacet [N-(4-fluorophenyl)-N-(1-methylethyl)-2-(5-(trifluoromethyl)-1,3,4- thiadiazol-2-yl)oxy] were isolated by C-18 solid-phase extraction and separated from their ethanesulfonic acid (ESA) and oxanilic acid (OXA) degradates during their elution using ethyl acetate for the parent compound, followed by methanol for the polar degradates. The parent compounds were detected using gas chromatography-mass spectrometry in selected-ion mode. The ESA and OXA degradates were detected using high-performance liquid chromatography-electrospray mass spectrometry (HPLC-ESPMS) in negative-ion mode. The method detection limits for a 123-mL sample ranged from 0.01 to 0.07 μg/L. These methods are compatible with existing methods and thus allow for analysis of 17 commonly used herbicides and 18 of their degradation compounds with one extraction. In a study of herbicide transport near the mouth of the Mississippi River during 1999 and 2000, dimethenamid and its ESA and OXA degradates were detected in surface water samples during the annual spring flushes. For flufenacet, the only detections at the study site were for the ESA degradates in samples collected at the peak of the herbicide spring flush in 2000. The low frequency of detections in surface water likely is due to dimethenamid and flufenacet being relatively new herbicides. In addition, detectable amounts of the stable degradates have not been detected in ground water.

Journal of Agricultural and Food Chemistry↗

Input, flux, and persistence of six select pesticides in San Francisco Bay

Temporal patterns of pesticide inputs to San Francisco Bay were identified and correlated with timing of application and transport mechanism. Fluxes were calculated from measured concentrations and estimated flow. Persistence of the pesticides under typical riverine or estuarine conditions were estimated from laboratory experiments. Simazine was detected most frequently and had the highest flux into the Bay, which could be explained by its continuous use and long half-life. In comparison, diazinon was detected at lower concentrations and had a lower flux which corresponded to its lower use and shorter half-life. The order-of-magnitude lower fluxes of carbofuran and methidathion corresponded to their lower use and expected hydrolysis. Molinate was detected at the highest concentration but its flux was lower than expected, considering its very high use and persistence in the laboratory experiments. Additional loss of molinate is likely to occur from volatilization and photodegradation on the rice fields. Although thiobencarb had the second highest use, it had the lowest flux of the six pesticides, which can be attributed to its loss via hydrolysis, photodegradation, volatilization, and sorption to sediments. Fluxes into San Francisco Bay were equal to or greater than those reported for other estuaries, except for the Gulf of Mexico.

California↗

Water-quality assessment of the Ozark Plateaus study unit, Arkansas, Kansas, Missouri, and Oklahoma- fish communities in streams of the Ozark Plateaus and their relations to selected environmental factors

Fish communities from 22 reaches at 18 stations in the Ozark Plateaus were sampled in 1993, 1994, and 1995. The 18 stations were chosen to represent selected combinations of major environmental factors (geology/physiographic area, land use, and basin size). Additional physical, chemical, and biological factors also were measured for each of the 22 reaches and the influence of these factors upon the fish communities was investigated. Fish community samples collected at the 22 reaches identified differences in these communities that can be attributed to differences in land use and related water-quality and habitat characteristics. Communities from agriculture reaches tended to have more species, increased relative abundance of stonerollers and members of the sucker family, and decreased relative abundance of members of the sunfish and darter families. Several groups of environmental factors (concentrations of nutrients, organic carbon, suspended sediment, and dissolved oxygen; measures related to ionic strength; measures related to riparian vegetation; measures related to substrate; and measures related to stream size) appear to be related to land-use differences and fish community differences. Three multivariate analysis techniques (two ordination techniques and a classification technique) yielded similar results when applied to the fish community data. Fish communities from reaches with more similar land use in their basins and with similar drainage areas generally were grouped closer together in the analysis. Water quality, substrate, stream morphology, and riparian measures appear to be affecting fish communities at these reaches. The relations between land use, stream size, and fish communities have implications for water quality assessments of Ozark streams. Compared to other parts of the United States, many fish species live in the Ozark Plateaus. At least 19 of these species are endemic to the Ozarks area. Many of these species are intolerant of habitat or water chemistry degradation. This characteristic makes fish a useful tool for assessing water-chemistry and other habitat conditions of streams. Several environmental factors can contribute to differences in fish communities. Elevated nutrient concentrations and greater canopy angles can increase periphyton production. Greater canopy angles can raise water temperatures and, if they reflect less woody vegetation along the banks of streams, can be associated with greater streambank erosion. Elevated suspended sediment concentrations and finer and more embedded substrates can reduce benthic macroinvertebrate populations, decrease spawning success of many fish species, and decrease protection of benthic fish from water velocities and predators.

Arkansas, Kansas, Missouri, Oklahoma↗

Design and methods of the California stream quality assessment (CSQA), 2017

During 2017, as part of the National Water-Quality Assessment Project, the U.S. Geological Survey conducted the California Stream Quality Assessment to investigate the quality of streams in the Central California Foothills and Coastal Mountains ecoregion, United States. The goal of the California Stream Quality Assessment study was to assess the health of wadeable streams in the region by characterizing multiple water-quality factors that are stressors to aquatic biota and by evaluating the relation between these stressors and biological indicators of stream health. Urbanization, agriculture, and modifications to streamflow are anthropogenic changes that affect water quality in the region; consequently, the study design primarily targeted sites and specific stressors associated with these activities. For the study, 85 stream sites were selected to represent the types and intensity of land use in the watershed; categories of site types were undeveloped, urban (low, medium, high), agriculture (low, high), and mixed (urban and agriculture). Most sites (about 70 percent) represent a gradient of urbanization from undeveloped to 99-percent urbanized. At most of the sites, streamgages or pressure transducers were used to monitor stream discharge and stage, as well as temperature. Water-quality samples were collected routinely at all sites and were analyzed for major ions, organic contaminants, nutrients, and suspended sediment. Sampling frequency varied on the basis of site type and location. Discrete water samples were collected weekly and generally 6 times per site, except for 11 undeveloped sites that were sampled only 4 times (during the last 4 weeks). Water sampling began at sites in the southern part of the study on March 13, 2017, and at sites in the northern part of the study on April 3, 2017. Passive samplers were deployed at most sites for measurement of polar organic contaminants (pesticides and pharmaceuticals). In May 2017, coincident with completion of water-quality sampling, an ecological survey was conducted at each site to assess benthic algal and macroinvertebrate communities and instream habitat. During the ecological surveys, a single composite streambed-sediment sample was collected for chemical analysis and toxicity testing. In addition, a few focused studies were done at subsets of sites, namely, measuring pesticides using small-volume automated samplers, measuring pesticides in biofilms, and sampling suspended sediments using passive samplers. This report describes the various study components and methods of the California Stream Quality Assessment, including measurements of water quality, sediment chemistry, habitat assessments, and ecological surveys, as well as procedures for sample analysis, quality assurance and quality control, and data management.

California↗

Relatively rapid loss of lampricide residues from fillet tissue of fish after routine treatment

The selective sea lamprey ( Petromyzon marinus ) larvicide 3-trifluoromethyl-4-nitrophenol (TFM) is currently used to control parasitic sea lampreys in tributaries to the Great Lakes basin. The concentration and persistence of TFM and its major metabolite, TFM glucuronide (TFM-glu), was determined in fillet tissue of fish after a typical stream application. Rainbow trout ( Oncorhynchus mykiss ) and channel catfish ( Ictalurus punctatus ) were exposed to a nominal concentration of 12.6 nmol/mL TFM for about 12 h during a sea lamprey control treatment of the Ford River in Michigan. Concentrations of TFM and TFM-glu were greatest in the fillet tissues during the exposure period, with greater residues in channel catfish (wet wt; mean, 6.95 nmol/g TFM; mean, 2.40 nmol/g TFM-glu) than in rainbow trout (wet wt; mean, 1.45 nmol/g TFM; mean, 0.93 nmol/g TFM-glu). After the exposure period, residues in both species decreased by 90−99% within 6−12 h and were less than the quantitation limit (<0.03 nmol/g) within 36 h.

Michigan↗

Laboratory-derived bioaccumulation kinetic parameters for four per- and polyfluoroalkyl substances in freshwater mussels

Although freshwater mussels are imperiled and identified as key conservation priorities, limited bioaccumulation information is available on these organisms for contaminants of emerging concern. In the present study we investigated the bioaccumulation of per- and polyfluoroalkyl substances (PFAS) in the model freshwater pond mussel Sagittunio subrostratus because mussels provide important ecosystem services and are important components of aquatic systems where PFAS occur. In the present study we selected four representative perfluorinated carboxylic acids and sulfonic acids, then determined the bioaccumulation kinetics of freshwater mussels in a controlled laboratory study. Because uptake ( k u ) and elimination ( k e ) rate constants and time to steady state are important parameters for food web bioaccumulation models, we derived bioaccumulation kinetic parameters following exposure to perfluorohexane sulfonic acid (PFHxS), perfluorooctane sulfonic acid (PFOS), and perfluorodecanoic acid (PFDA) at 10 µg/L and perfluoroundecanoic acid (PFUnDA) at 1 µg/L during a 14-day uptake period followed by a 7-day elimination period. Kinetic and ratio-based bioaccumulation factors (BAFs) were subsequently calculated, for example ratio-based BAFs for mussel at day 7 were determined for PFHxS (0.24 ± 0.08 L/kg), PFOS (7.73 ± 1.23 L/kg), PFDA (4.80 ± 1.21 L/kg), and PFUnDA (84.0 ± 14.4 L/kg). We generally observed that, for these four model PFAS, freshwater mussels have relatively low BAF values compared with other aquatic invertebrates and fish.

Environmental Toxicology and Chemistry↗

Profiles of polychlorinated biphenyl congeners, organochlorine pesticides and butlyns in southern sea otters and their prey

Concentrations of organochlorine pesticides, polychlorinated biphenyl (PCB)congeners, and butyltins were measured in sea otters and selected prey species (invertebrates) collected from the California (USA) coast. Polychlorinated biphenyls, DDTs (sum of p,p ′-dichlorodiphenyldichloroethylene [ p,p -DDE], p,p ′-dichlorodiphenyldichloroethane [ p,p -DDD], and p,p ′-DDT), and butyltins were the major contaminants found in sea otters and their prey. Lipid-normalized concentrations of PCBs and DDT in sea otter livers were 60- and 240-fold greater than those found in the prey. Great biomagnification of PCBs and DDT in sea otters is suggested to result from their high per-capita intake of diet compared with those of other marine mammals. Profiles of PCB congeners in sea otters and prey species suggest a great capacity of sea otters to biotransform lower-chlorinated congeners. Sea otters seem to possess a greater ability than cetaceans to metabolize PCBs. The 2,3,7,8-tetrachlorodibenzo- p -dioxin equivalents of non- and mono- ortho PCBs in sea otters and certain prey species were at or above the theoretical threshold for toxic effects.

California↗

Mg isotope constraints on soil pore-fluid chemistry: Evidence from Santa Cruz, California

Mg isotope ratios ( 26 Mg/ 24 Mg) are reported in soil pore-fluids, rain and seawater, grass and smectite from a 90 kyr old soil, developed on an uplifted marine terrace from Santa Cruz, California. Rain water has an invariant 26 Mg/ 24 Mg ratio (expressed as δ26 Mg> δ26 Mg ) at −0.79 ± 0.05‰, identical to seawater δ26 Mg> δ26 Mg . Detrital smectite (from the base of the soil profile, and therefore unweathered) has a δ26Mg"> δ26Mg value of 0.11‰, potentially enriched in 26 Mg by up to 0.3‰ compared to the bulk silicate Earth Mg isotope composition (although within the range of all terrestrial silicates). The soil pore-waters show a continuous profile with depth for δ26 Mg> δ26 Mg , ranging from −0.99‰ near the surface to −0.43‰ at the base of the profile. Shallow pore-waters (<1 m) have δ26 Mg> δ26 Mg values that are similar to, or slightly lower than the rain waters. This implies that the degree of biological cycling of Mg in the pore-waters is relatively small and is quantified as <32%, calculated using the average Mg isotope enrichment factor between grass and rain ( δ26 Mggrass- δ26 Mgrain> δ26 Mggrass- δ26 Mgrain ) of 0.21‰. The deep pore-waters (1–15 m deep) have δ26 Mg> δ26 Mg values that are intermediate between the smectite and rain, ranging from −0.76‰ to −0.43‰, and show a similar trend with depth compared to Sr isotope ratios. The similarity between Sr and Mg isotope ratios confirms that the Mg in the pore-waters can be explained by a mixture between rain and smectite derived Mg, despite the fact that Mg and Sr concentrations may be buffered by the exchangeable reservoir. However, whilst Sr isotope ratios in the pore-waters span almost the complete range between mineral and rain inputs, Mg isotopes compositions are much closer to the rain inputs. If Mg and Sr isotope ratios are controlled uniquely by a mixture, the data can be used to estimate the mineral weathering inputs to the pore-waters, by correcting for the rain inputs. This isotopic correction is compared to the commonly used chloride correction for precipitation inputs. A consistent interpretation is only possible if Mg isotope ratios are fractionated either by the precipitation of a secondary Mg bearing phase, not detected by conventional methods, or selective leaching of 24 Mg from smectite. There is therefore dual control on the Mg isotopic composition of the pore-waters, mixing of two inputs with distinct isotopic compositions, modified by fractionation. The data provide (1) further evidence for Mg isotope fractionation at the surface of the Earth and (2) the first field evidence of Mg isotope fractionation during uptake by natural plants. The coherent behaviour of Mg isotope ratios in soil environments is encouraging for the development of Mg isotope ratios as a quantitative tracer of both weathering inputs of Mg to waters, and the physicochemical processes that cycle Mg, a major cation linked to the carbon cycle, during continental weathering.

California↗

Environmental setting and natural factors and human influences affecting water quality in the White River Basin, Indiana

The White River Basin drains 11,349 square miles of central and southern Indiana and is one of 59 Study Units selected for water-quality assessment as part of the U.S. Geological Survey's National WaterQuality Assessment Program. Defining the environmental setting of the basin and identifying the natural factors and human influences that affect water quality are important parts of the assessment. Interrelated natural factors help determine the quality of surface and ground water in a river basin. The White River Basin has a humid continental climate, characterized by well-defined winter and summer seasons. Geologic features in the basin include glaciated and nonglaciated areas; a region of karst geomorphology that is characterized by caves and sinkholes; and a thick, sedimentary bedrock sequence underlying the entire basin. Unconsolidated glacial deposits of clay, silt, sand and gravel cover more than 60 percent of the basin. Soils developed in unconsolidated glacial deposits are typically fertile, naturally or artificially well drained, and farmed. Soils in the unglaciated south-central part of the basin are thin, have low fertility, and are best suited for forest or pasture. Agriculture is the principal land use in the White River Basin. Approximately 70 percent of the basin is used for agriculture, and about 50 percent of the basin is cropland. Corn and soybeans are the major crops. Other significant land uses are forest (22 percent) and urban and residential (7 percent). The population of the basin was 2.1 million in 1990. Water use in the White River Basin totaled 1,284 million gallons per day in 1995, of which 84.5 percent was surface water and 15.5 percent was ground water. Despite the predominant use of surface water, ground water was the primary source of drinking water for approximately 56 percent of the population. The general water chemistry in the White River Basin is determined by natural factors such as soils and geologic materials that water contacts as it moves through the hydrologic system. In the southern part of the basin, bedrock upland areas are dominated by non-carbonate bedrock, thin soils, and high runoff-rainfall ratios. These areas have small chemical concentrations in streamwater. Conversely, in the northern part of the basin where glacial deposits are thick and in the southwestern part of the basin where loess deposits are thick, water has longer periods of time to react with soils and aquifers and to acquire substantial quantities of dissolved constituents. As a result, streams in the till plain and glacial lowland have higher concentrations of most constituents than streams in the unglaciated parts of the basin. Water quality is significantly modified by human influences. Water quality is affected locally by point sources of contamination that include combined-sewer overflows, power-generation-plant cooling stations, and wastewater-treatment-plant effluents that are generally associated with densely populated areas. Water quality is additionally affected by non-point sources of contamination related to agriculture, urban runoff, and mining. Six hydrogeomorphic regions of the White River Basin are delineated on the basis of distinct and relatively homogeneous natural characteristics. These six regions are used in the White River Basin study as a framework for examining the effects of natural factors on water quality in the basin. Bedrock is exposed or near the surface in three hydrogeomorphic regions the bedrock uplands, bedrock lowland and plain, and karst plain; streams and shallow aquifers in these regions are susceptible to contamination, especially in the karst plain, and show rapid response to rainfall. The other three hydrogeomorphic regions the fluvial deposits, till plain, and glacial lowland are in the glaciated part of the basin. Where thick fine-grained unconsolidated sediments are present, primarily in the till plain, ground-water supplies are protected from contamination, and extreme high and low streamflows are moderated.

Indiana↗

Selected resin acids in effluent and receiving waters derived from a bleached and unbleached kraft pulp and paper mill

Water samples were collected on three dates at 24 sites influenced by effluent from Georgia-Pacific's Palatka Pulp and Paper Mill Operation, a bleached and unbleached kraft mill near Palatka, Florida, USA. The sampling sites were located within the mill retention ponds, Rice Creek, and the St. John's River. Samples were analyzed by gas chromatography-mass spectrometry for abietic, dehydroabietic, and isopimaric acids, all of which are potentially toxic by-products of pulp production. Isopimaric acid concentrations greater than 12 mg/L were measured at the mill's effluent outfall but were less than 20 μg/L at the end of Rice Creek. This result indicates that the waters of Rice Creek provide dilution or conditions conducive for degradation or sorption of these compounds. Large differences in resin acid concentrations were observed between sampling events. In two sampling events, the maximum observed concentrations were less than 2 mg/L for each analyte. In a third sampling event, all of the compounds were detected at concentrations greater than 10 mg/L. Data from the three sample dates showed that resin acid concentrations were below 20 μg/L before the confluence of Rice Creek and the St. John's River in all cases.

Florida↗

Biogeochemical transport in the Loxahatchee River estuary, Florida: The role of submarine groundwater discharge

The distributions of dissolved organic carbon (DOC), Ba, U, and a suite of naturally occurring radionuclides in the U/Th decay series (222Rn, 223,224,226,228Ra) were studied during high- and low-discharge conditions in the Loxahatchee River estuary, Florida to examine the role of submarine groundwater discharge in estuarine transport. The fresh water endmember of this still relatively pristine estuary may reflect not only river-borne constituents, but also those advected during active groundwater/surface water (hyporheic) exchange. During both discharge conditions, Ba concentrations indicated slight non-conservative mixing. Such Ba excesses could be attributed either to submarine groundwater discharge or particle desorption processes. Estuarine dissolved organic carbon concentrations were highest at salinities closest to zero. Uranium distributions were lowest in the fresh water sites and mixed mostly conservatively with an increase in salinity. Suspended particulate matter (SPM) concentrations were generally lowest (< 5??mg L- 1) close to zero salinity and increased several-fold (??? 18??mg L- 1; low discharge) toward the seaward endmember, which may be attributed to dynamic resuspension of bottom sediments within Jupiter Inlet. Surface water-column 222Rn activities were most elevated (> 28??dpm L- 1) at the freshwater endmember of the estuary and appear to identify regions of the river most influenced by the discharge of fresh groundwater. Activities of four naturally occurring isotopes of Ra (223,224,226,228Ra) in this estuary and select adjacent shallow groundwater wells yield mean estuarine water-mass transit times of less than 1 day; these values are in close agreement to those calculated by tidal prism and tidal frequency. Submarine groundwater discharge rates to the Loxahatchee River estuary were calculated using a tidal prism approach, an excess 226Ra mass balance, and an electromagnetic seepage meter. Average SGD rates ranged from 1.0 to 3.8 ?? 105??m3 d- 1 (20-74??L m- 2 d- 1), depending on river-discharge stage. Such calculated SGD estimates, which must include both a recirculated as well as fresh water component, are in close agreement with results obtained from a first-order watershed mass balance. Average submarine groundwater discharge rates yield NH4+ and PO4- 3 flux estimates to the Loxahatchee River estuary that range from 62.7 to 1063.1 and 69.2 to 378.5????mol m- 2 d- 1, respectively, depending on river stage. SGD-derived nutrient flux rates are compared to yearly computed riverine total N and total P load estimates. ?? 2006 Elsevier B.V. All rights reserved.

Marine Chemistry↗

The Japanese Quail as an avian model for testing endocrine disrupting chemicals: endocrine and behavioral end points

Birds have extremely varied reproductive strategies. As such, the impact of endocrine disrupting chemicals (EDCs) can greatly differ across avian species. Precocial species, such as Japanese quail appear to be most sensitive to EDC effects during embryonic development, particularly sexual differentiation. A great deal is known about the ontogeny of Japanese quail (Coturnix japonica) relative to endocrine, neuro-endocrine, and behavioral components of reproduction. Therefore, this species provides an excellent model for understanding effects of EDCs on reproductive biology with exposure at specific stages of the life cycle. The purpose of these experiments was to conduct a 1- or 2- generation experiment with positive or negative control chemicals and to determine changes in selected end points. Japanese quail embryos were exposed to estradiol benzoate (EB; positive control) in a 2-generation design or to fadrozole (FAD; negative control) in a 1-generation design. Embryonic EB treatment resulted in significant reductions (p< 0.5) in hen day production (90.2 vs 54.1; control vs EB, resp.) and fertility (85.3 vs 33.4%, control vs EB, resp.). Males showed sharply reduced courtship and mating behaviors as well as increased lag time (26 vs 148 sec; control vs EB) in behavioral tests. Fadrozole exposure resulted in reduced hatchability of fertile eggs, particularly at higher doses. There were no significant effects on courtship and mating behavior of males although males showed an increased lag time in their responses, nally, a behavioral test for studying motor and fear responses in young chicks was used; chicks exposed to an estrogenic pesticide (methoxychlor) showed some deficits. In summary, the use of appropriate and reliable end points that are responsive to endocrine disruption are critical for assessment of EDCs. Supported in part by EPA grant R826134.

Society of Environmental Toxicology and Chemistry,↗