SEARCH · Search USGS

Results for “Stacks Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

USGS1975

Tectonics of the western Valley and Ridge foldbelt, Pendleton County, West Virginia - a summary report

A belt of high anticlines, the Nittany anticlinorium, occupies the western Valley and Ridge foldbelt in the central Appalachians. It extends southwestward from the Nittany arch of central Pennsylvania into the Virginias. An investigation of the tectonics of this anticlinorium in Pendleton County, W. Va., rules out active basement involvement in the deformation of the area. Cross-sectional models consistent with the accumulated data show that Middle Cambrian through Middle Ordovician carbonate rocks are technically stacked, shingle-fashion, from southeast to northwest below predominantly folded younger strata that have undergone less lateral shortening. Differential shortening in this area is of the proper order to balance cover deformation in the Allegheny synclinorium to the west. Field relations suggest a long period of abnormally high fluid pressures in Lower Devonian and older strata during deformation. At this time, the area was under sufficient northwest, near-horizontal compressive stress for abundant quartz deformation lamellae to form. Gravity sliding is ruled out as the deforming mechanism for this part of the Appalachian foldbelt. No significant tectonism appears to have occurred prior to Pennsylvanian time in this area.

West Virginia↗

USGS1985

Inversion of seismic refraction data in planar dipping structure

A new method is presented for the direct inversion of seismic refraction data in dipping planar structure. Three recording geometries, each consisting of two common-shot profiles, are considered: reversed, split, and roll-along profiles. Inversion is achieved via slant stacking the common-shot wavefield to obtain a delay time—slowness (tau— p ) wavefield. The tau— p curves from two shotpoints describing the critical raypath of refracted and post-critically reflected arrivals are automatically picked using coherency measurements and the two curves are jointly used to calculate velocity and dip of isovelocity lines iteratively, thereby obtaining the final two-dimensional velocity model. This procedure has been successfully applied to synthetic seismograms calculated for a dipping structure and to field data from central California. The results indicate that direct inversion of closely-spaced refraction/wide-aperture reflection data can practically be achieved in laterally inhomogeneous structures.

Geophysical Journal International↗

USGS1995

Wind shear stress measurements in a coastal marsh during Hurricane Andrew

Hurricane Andrew produced changes to the Louisiana wetlands not normally observed after lesser, more common storms. For example, the <25 m/s wind speeds generated by cold fronts and winter storms, and any accompanying storm surge, do not cause substantial, wide-spread alteration of marsh vegetation. During Hurricane Andrew, however, the wind, the wind-driven storm surge, or both produced severe, wide-spread wetland alteration, especially in areas that primarily consisted of densely vegetated floating mats. In a few hours, vegetated brackish marsh was severely torn and large areas were converted to open water, a process that takes decades when driven by geologic subsidence, human intervention, and lesser storms. During the passage of Hurricane Andrew, wind measurements were taken inside an impoundment within a brackish part of Louisiana's coastal wetlands system. At its closest point, the site lay 50 km to the right of the north-trending storm track, placing it in or near the zone of maximum wind (the eye wall). As the hurricane approached, the wind blew from the north; after it passed, the wind direction swung around to the southeast. Several hours after the eye passed, the southeasterly wind drove a 1.5-m storm surge through the area, causing the collapse of the meteorology tower. Wind shear stress calculations, based on data from two vertically stacked sensors, showed a direct correlation between wind shear stress and wind speed. The greatest increase in wind shear stress occurred when wind speed exceeded 20 m/s. Overall, wind shear stress increased more than three orders of magnitude — from approximately 0.01 N/m² at a wind speed of 6 m/s through 1 N/m² at 20 m/s to 18 N/m² at the maximum sustained speed of 43 m/s. Drag-coefficient calculations show that the open-ocean CD formulations, such as the popular WAMDI model, cannot be employed for wetland use because it overestimates CD for velocities less than approximately 20 m/s and underestimates it for higher velocities.

Louisiana↗

USGS2008

Kaguyak dome field and its Holocene caldera, Alaska Peninsula

Kaguyak Caldera lies in a remote corner of Katmai National Park, 375 km SW of Anchorage, Alaska. The 2.5-by-3-km caldera collapsed ~ 5.8 ± 0.2 ka ( 14 C age) during emplacement of a radial apron of poorly pumiceous crystal-rich dacitic pyroclastic flows (61–67% SiO 2 ). Proximal pumice-fall deposits are thin and sparsely preserved, but an oxidized coignimbrite ash is found as far as the Valley of Ten Thousand Smokes, 80 km southwest. Postcaldera events include filling the 150-m-deep caldera lake, emplacement of two intracaldera domes (61.5–64.5% SiO 2 ), and phreatic ejection of lakefloor sediments onto the caldera rim. CO 2 and H 2 S bubble up through the lake, weakly but widely. Geochemical analyses ( n = 148), including pre-and post-caldera lavas (53–74% SiO 2 ), define one of the lowest-K arc suites in Alaska. The precaldera edifice was not a stratocone but was, instead, nine contiguous but discrete clusters of lava domes, themselves stacks of rhyolite to basalt exogenous lobes and flows. Four extra caldera clusters are mid-to-late Pleistocene, but the other five are younger than 60 ka, were truncated by the collapse, and now make up the steep inner walls. The climactic ignimbrite was preceded by ~ 200 years by radial emplacement of a 100-m-thick sheet of block-rich glassy lava breccia (62–65.5% SiO 2 ). Filling the notches between the truncated dome clusters, the breccia now makes up three segments of the steep caldera wall, which beheads gullies incised into the breccia deposit prior to caldera formation. They were probably shed by a large lava dome extruding where the lake is today.

Alaska↗

USGS2004

Object-based inversion of crosswell radar tomography data to monitor vegetable oil injection experiments

Crosswell radar methods can be used to dynamically image ground-water flow and mass transport associated with tracer tests, hydraulic tests, and natural physical processes, for improved characterization of preferential flow paths and complex aquifer heterogeneity. Unfortunately, because the raypath coverage of the interwell region is limited by the borehole geometry, the tomographic inverse problem is typically underdetermined, and tomograms may contain artifacts such as spurious blurring or streaking that confuse interpretation. We implement object-based inversion (using a constrained, non-linear, least-squares algorithm) to improve results from pixel-based inversion approaches that utilize regularization criteria, such as damping or smoothness. Our approach requires pre- and post-injection travel-time data. Parameterization of the image plane comprises a small number of objects rather than a large number of pixels, resulting in an overdetermined problem that reduces the need for prior information. The nature and geometry of the objects are based on hydrologic insight into aquifer characteristics, the nature of the experiment, and the planned use of the geophysical results. The object-based inversion is demonstrated using synthetic and crosswell radar field data acquired during vegetable-oil injection experiments at a site in Fridley, Minnesota. The region where oil has displaced ground water is discretized as a stack of rectangles of variable horizontal extents. The inversion provides the geometry of the affected region and an estimate of the radar slowness change for each rectangle. Applying petrophysical models to these results and porosity from neutron logs, we estimate the vegetable-oil emulsion saturation in various layers. Using synthetic- and field-data examples, object-based inversion is shown to be an effective strategy for inverting crosswell radar tomography data acquired to monitor the emplacement of vegetable-oil emulsions. A principal advantage of object-based inversion is that it yields images that hydrologists and engineers can easily interpret and use for model calibration.

Journal of Environmental & Engineering Geophysics↗

USGS2019

Depth determination of the 2010 El Mayor‐Cucapah earthquake sequence (M ≥ 4.0)

The 2010 M W 7.2 El Mayor‐Cucapah earthquake ruptured a zone of ~120 km in length in northern Baja California. The geographic distribution of this earthquake sequence was well constrained by waveform relocation. The depth distribution, however, was poorly determined as it is near the edge of, or outside, the Southern California Seismic Network. Here we use two complementary methods to constrain the focal depths of moderate‐sized events ( M ≥ 4.0) in this sequence. We first determine the absolute earthquake depth by modeling the regional depth phases at high frequencies (~1 Hz). We mainly focus on Pn and its depth phases pPn and sPn , which arrive early at regional distance and are less contaminated by crustal multiples. To facilitate depth phase identification and to improve signal‐to‐noise ratio, we take advantage of the dense Southern California Seismic Network and use array analysis to align and stack Pn waveforms. For events without clear depth phases, we further determine their relative depths with respect to those with known depths using differential travel times of the Pn , direct P , and direct S phases recorded for event pairs. Focal depths of 93 out of 122 M ≥ 4.0 events are tightly constrained with absolute uncertainty of about 1 km. Aftershocks are clustered in the depth range of 3–10 km, suggesting a relatively shallow seismogenic zone, consistent with high surface heat flow in this region. Most aftershocks are located outside or near the lower terminus of coseismic high‐slip patches of the main shock, which may be governed by residual strains, local stress concentration, or postseismic slip.

Baja California↗

USGS1995

East Louisiana continental shelf sediments: a product of delta reworking

Data from 77 vibracores were integrated with 6,700 line-km of high- resolution seismic reflection profiles collected off the eastern Louisiana coast in the region of the St. Bernard Delta, the first of the Holocene highstand deltas of the Mississippi River. Seismic fades and sediment facies were integrated in order to establish the stratigraphic details within this relict delta. Results provide a regional geologic framework from which comparisons can be made with other areas. Holocene deposits in the study area overlie a heavily dissected surface interpreted to represent a lowstand erosional surface. Resting on this surface is a thin unit of relatively clean, quartz sand interpreted to have been deposited during early transgression. This unit is overlain by sediments of the St. Bernard Delta, a seaward-prograding, coarsening-upward wedge of sands and muds that contain vertically-stacked units of deltaic succession. Two or more prograding units separated by an unconformity, delineated from regional seismic profiles, may represent laterally shifting subdelta lobes. Surficial sediments consist of a thin unit of sands and muds derived from and reflecting the individual subenvirons of the underlying delta. Holocene inner-shelf development off eastern Louisiana has been controlled by relative sea-level rise and sediment supply. Sediment supply and deposition are a product of delta progradation and delta-lobe switching. The modern shelf configuration and surficial sediment distribution patterns reflect reworking of underlying deltaic deposits. The lack of modern sediment input helps to maintain the imprint of this ancient delta on the modern shelf surface.

Louisiana↗

USGS1997

Application of the LI-COR CO 2 analyzer to volcanic plumes: a case study, volcán Popocatépetl, Mexico, June 7 and 10, 1995

Volcanic CO 2 emission rate data are sparse despite their potential importance for constraining the role of magma degassing in the biogeochemical cycle of carbon and for assessing volcanic hazards. We used a LI-COR CO 2 analyzer to determine volcanic CO 2 emission rates by airborne measurements in volcanic plumes at Popocatépetl volcano on June 7 and 10, 1995. LI-COR sample paths of &sim;72 m, compared with &sim;1 km for the analyzer customarily used, together with fast Fourier transforms to remove instrument noise from raw data greatly improve resolution of volcanic CO 2 anomalies. Parametric models fit to background CO 2 provide a statistical tool for distinguishing volcanic from ambient CO 2 . Global Positioning System referenced flight traverses provide vastly improved data on the shape, coherence, and spatial distribution of volcanic CO 2 in plume cross sections and contrast markedly with previous results based on traverse stacking. The continuous escape of CO 2 and SO 2 from Popocatépetl was fundamentally noneruptive and represented quiescent magma degassing from the top of a magma chamber &sim;5 km deep. The average CO 2 emission rate for January-June 1995 is estimated to be at least 6400 t d −1 , one of the highest determined for a quiescently degassing volcano, although correction for downwind dispersion effects on volcanic CO 2 indicates a higher rate of &sim;9000 t d −1 . Analysis of random errors indicates emission rates have 95% confidence intervals of &sim;±20%, with uncertainty contributed mostly by wind speed variance, although the variance of plume cross-sectional areas during traversing is poorly constrained and possibly significant.

Journal of Geophysical Research B: Solid Earth↗

USGS1998

Time functions of deep earthquakes from broadband and short-period stacks

To constrain dynamic source properties of deep earthquakes, we have systematically constructed broadband time functions of deep earthquakes by stacking and scaling teleseismic P waves from U.S. National Seismic Network, TERRAscope, and Berkeley Digital Seismic Network broadband stations. We examined 42 earthquakes with depths from 100 to 660 km that occurred between July 1, 1992 and July 31, 1995. To directly compare time functions, or to group them by size, depth, or region, it is essential to scale them to remove the effect of moment, which varies by more than 3 orders of magnitude for these events. For each event we also computed short-period stacks of P waves recorded by west coast regional arrays. The comparison of broadband with short-period stacks yields a considerable advantage, enabling more reliable measurement of event duration. A more accurate estimate of the duration better constrains the scaling procedure to remove the effect of moment, producing scaled time functions with both correct timing and amplitude. We find only subtle differences in the broadband time-function shape with moment, indicating successful scaling and minimal effects of attenuation at the periods considered here. The average shape of the envelopes of the short-period stacks is very similar to the average broadband time function. The main variations seen with depth are (1) a mild decrease in duration with increasing depth, (2) greater asymmetry in the time functions of intermediate events compared to deep ones, and (3) unexpected complexity and late moment release for events between 350 and 550 km, with seven of the eight events in that depth interval displaying markedly more complicated time functions with more moment release late in the rupture than most events above or below. The first two results are broadly consistent with our previous studies, while the third is reported here for the first time. The greater complexity between 350 and 550 km suggests greater heterogeneity in the failure process in that depth range.

Journal of Geophysical Research B: Solid Earth↗

USGS1998

Early proterozoic evolution of the saskatchewan craton and its allochthonous coyer, trans-hudson Orogen

The composition, chronology, and structural relations of the Saskatchewan Craton and enveloping mylonitic rocks exposed in basement windows of the Glennie Domain, Trans‐Hudson Orogen, have been determined by geochemical, geochronologic, and structural studies accompanying detailed field mapping. Basement windows lie along the hinge zone of a regional crustal culmination and consist mostly of 2.4–2.5 Ga felsic plutonic rocks enveloped by the Nistowiak Thrust. The Nistowiak Thrust is a folded, 1–2 km thick, upper amphibolite facies mylonite zone formed during emplacement of the Flin Flon–Glennie Complex across the Saskatchewan Craton. It is likely correlative to the Pelican Thrust, which envelops basement windows in the Hanson Lake Block ∼100 km to the east. An internal high strain zone within the overlying nappe pile, the Guncoat Thrust, is composed primarily of mylonitized porphyroclastic pelitic and psammitic migmatites. U‐Pb geochronological results suggest calc‐alkaline plutonism from 1889–1837 Ma, thrust stacking, peak metamorphism and associated anatexis between 1837 and 1809 Ma, isotopic closure of titanite at 1790–1772 Ma, and intrusion of late granitic rocks at 1770–1762 Ma. This is in agreement with ages from the Hanson Lake Block, and La Ronge, Kisseynew, and Flin‐Flon domains in Saskatchewan and Manitoba, and from the Ungava‐Baffin portion of Trans‐Hudson Orogen, suggesting broadly synchronous thermotectonic processes along a strike length of 2000 km. We speculate that the Saskatchewan Craton, rather than representing an exotic continental fragment, rifted from the Superior and/or Hearne Provinces at ca. 2.1 Ga and that the Trans‐Hudson Orogen is an internal orogen. In this scenario the Maniwekan Ocean, developed between the Rae‐Hearne and Superior cratons, opened and closed about similar pole(s) of plate motion.

Journal of Geology↗

USGS2015

Chemical variations in Yellowknife Bay formation sedimentary rocks analyzed by ChemCam on board the Curiosity rover on Mars

The Yellowknife Bay formation represents a ~5 m thick stratigraphic section of lithified fluvial and lacustrine sediments analyzed by the Curiosity rover in Gale crater, Mars. Previous works have mainly focused on the mudstones that were drilled by the rover at two locations. The present study focuses on the sedimentary rocks stratigraphically above the mudstones by studying their chemical variations in parallel with rock textures. Results show that differences in composition correlate with textures and both manifest subtle but significant variations through the stratigraphic column. Though the chemistry of the sediments does not vary much in the lower part of the stratigraphy, the variations in alkali elements indicate variations in the source material and/or physical sorting, as shown by the identification of alkali feldspars. The sandstones contain similar relative proportions of hydrogen to the mudstones below, suggesting the presence of hydrous minerals that may have contributed to their cementation. Slight variations in magnesium correlate with changes in textures suggesting that diagenesis through cementation and dissolution modified the initial rock composition and texture simultaneously. The upper part of the stratigraphy (~1 m thick) displays rocks with different compositions suggesting a strong change in the depositional system. The presence of float rocks with similar compositions found along the rover traverse suggests that some of these outcrops extend further away in the nearby hummocky plains.

Journal of Geophysical Research E: Planets↗

USGS2016

Topobathymetric elevation model development using a new methodology: Coastal National Elevation Database

During the coming decades, coastlines will respond to widely predicted sea-level rise, storm surge, and coastalinundation flooding from disastrous events. Because physical processes in coastal environments are controlled by the geomorphology of over-the-land topography and underwater bathymetry, many applications of geospatial data in coastal environments require detailed knowledge of the near-shore topography and bathymetry. In this paper, an updated methodology used by the U.S. Geological Survey Coastal National Elevation Database (CoNED) Applications Project is presented for developing coastal topobathymetric elevation models (TBDEMs) from multiple topographic data sources with adjacent intertidal topobathymetric and offshore bathymetric sources to generate seamlessly integrated TBDEMs. This repeatable, updatable, and logically consistent methodology assimilates topographic data (land elevation) and bathymetry (water depth) into a seamless coastal elevation model. Within the overarching framework, vertical datum transformations are standardized in a workflow that interweaves spatially consistent interpolation (gridding) techniques with a land/water boundary mask delineation approach. Output gridded raster TBDEMs are stacked into a file storage system of mosaic datasets within an Esri ArcGIS geodatabase for efficient updating while maintaining current and updated spatially referenced metadata. Topobathymetric data provide a required seamless elevation product for several science application studies, such as shoreline delineation, coastal inundation mapping, sediment-transport, sea-level rise, storm surge models, and tsunami impact assessment. These detailed coastal elevation data are critical to depict regions prone to climate change impacts and are essential to planners and managers responsible for mitigating the associated risks and costs to both human communities and ecosystems. The CoNED methodology approach has been used to construct integrated TBDEM models in Mobile Bay, the northern Gulf of Mexico, San Francisco Bay, the Hurricane Sandy region, and southern California.

Journal of Coastal Research↗

USGS2018

Multiple stacked plays to drive continued Permian development

The exploitation of unconventional (continuous) resource plays with horizontal drilling and fracturing techniques continues to spur renewed development in mature producing basins in the US. The Permian basin of west Texas has emerged as a particularly strong prospect due to the potential for multiple stacked resource plays in formations such as the Wolfcamp shale and Spraberry and Bone Spring formations. Production began in the Permian basin in the early 1920s, and more than 116,000 wells have been drilled in Midland basin alone. 1 2 In 2017, total Permian basin oil production climbed to nearly 1.7 million b/d. 3 The US Geological Survey (USGS) conducts geologic-based assessments of undiscovered, technically recoverable domestic hydrocarbon resources. The USGS recently assessed the Wolfcamp shale in the Midland basin portion of the Permian basin for continuous (unconventional) oil and gas resources, and completed a reassessment of the Spraberry formation for both continuous and conventional oil and gas. 4 5 Combined, the assessments of the Spraberry formation and underlying Wolfcamp shale in Midland basin comprise the largest domestic continuous oil assessment in the contiguous US (Fig. 1).

Texas↗

USGS1992

Hydrological, geomorphological, and chemical effects of Hurricane Andrew on coastal marshes of Louisiana

Hydrological conditions are reported for the hurricane-induced storm surge at marsh sites in Terrebonne and Barataria Basins. There was a 6 hour or greater delay in the arrival of the storm surge at interior marsh sites compared to coastal locations. A water surge of about 1.5 m with a salinity of 10–15‰ was recorded at an intermediate salinity marsh site in Terrebonne Basin where significant geomorphological changes occurred with lateral movement and stacking of marsh vegetation and sediment, erosion, and the conversion of wetlands to open water. A residual salt wedge attributed to the storm surge was detected in sediments at this intermediate marsh site about 55 days after the hurricane. In the pore water, at 30 cm in depth, there were increases in alkalinity, ammonia, phosphate, and manganese, but not iron or sulfide, although there was a significant depletion of sulfur with respect to chloride. The increases in concentration of these species in the pore water suggests that there was an increase in organic matter decomposition. Although increases in sulfide phytotoxicity were not obvious, the residual salinity of pore water may influence wetland loss through longer-term impacts on macrophyte production. Storm-induced sediment deposition, which will help ameliorate wetland loss, was observed at a salt marsh site in Terrebonne Basin.

Louisiana↗

USGS2016

3-D P- and S-wave velocity structure and low-frequency earthquake locations in the Parkfield, California region

To refine the 3-D seismic velocity model in the greater Parkfield, California region, a new data set including regular earthquakes, shots, quarry blasts and low-frequency earthquakes (LFEs) was assembled. Hundreds of traces of each LFE family at two temporary arrays were stacked with time–frequency domain phase weighted stacking method to improve signal-to-noise ratio. We extend our model resolution to lower crustal depth with LFE data. Our result images not only previously identified features but also low velocity zones (LVZs) in the area around the LFEs and the lower crust beneath the southern Rinconada Fault. The former LVZ is consistent with high fluid pressure that can account for several aspects of LFE behaviour. The latter LVZ is consistent with a high conductivity zone in magnetotelluric studies. A new Vs model was developed with S picks that were obtained with a new autopicker. At shallow depth, the low Vs areas underlie the strongest shaking areas in the 2004 Parkfield earthquake. We relocate LFE families and analyse the location uncertainties with the NonLinLoc and tomoDD codes. The two methods yield similar results.

California↗

USGS2020

Semiautomated estimates of directivity and related source properties of small to moderate southern California earthquakes using second seismic moments

We develop a semiautomated method for estimating with second seismic moments the directivity, rupture area, duration, and centroid velocity of earthquakes. The method is applied to 41 southern California earthquakes with magnitude in the range 3.5–5.2 and provides stable results for 28 events. Apparent source time functions (ASTFs) of P and S phases are derived using deconvolution with three stacked empirical Green's functions (seGf). The use of seGf suppresses nongeneric source effects, improves the focal mechanism correspondence to the analyzed earthquakes, and typically allows inclusion of 5 to 15 more ASTFs compared with analysis using a single eGf. Most analyzed earthquakes in the Trifurcation area of the San Jacinto Fault have directivities toward the northwest, while events around Cajon Pass and San Gabriel Mountain tend to propagate toward the southeast. These results are generally consistent with predictions for dynamic rupture on bimaterial interfaces associated with the imaged velocity contrasts in the area. The second moment inversions also provide constraints on the upper and lower bounds of rupture areas in our data set. Stress drops and uncertainties are estimated for elliptical ruptures using the derived characteristic rupture length and width. The semiautomated second moment method with seGfs can be used for routine application to moderate earthquakes in locations with good station coverage.

California↗

USGS2011

Exhumation history of the NW Indian Himalaya revealed by fission track and 40Ar/39Ar ages

New fission track and Ar/Ar geochronological data provide time constraints on the exhumation history of the Himalayan nappes in the Mandi (Beas valley) — Tso Morari transect of the NW Indian Himalaya. Results from this and previous studies suggest that the SW-directed North Himalayan nappes were emplaced by detachment from the underthrusted upper Indian crust by 55 Ma and metamorphosed by ca. 48–40 Ma. The nappe stack was subsequently exhumed to shallow upper crustal depths (<10 km) by 40–30 Ma in the Tso Morari dome (northern section of the transect) and by 30–20 Ma close to frontal thrusts in the Baralacha La region. From the Oligocene to the present, exhumation continued slowly. Metamorphism started in the High Himalayan nappe prior to the Late Oligocene. High temperatures and anatexis of the subducting upper Indian crust engendered the buoyancy-driven ductile detachment and extrusion of the High Himalayan nappe in the zone of continental collision. Late extrusion of the High Himalayan nappe started about 26 Ma ago, accompanied by ductile extensional shearing in the Zanskar shear zone in its roof between 22 and 19 Ma concomitant with thrusting along the basal Main Central Thrust to the south. The northern part of the nappe was then rapidly exhumed to shallow depth (<10 km) between 20 and 6 Ma, while its southern front reached this depth at 10–5 Ma.

Journal of Asian Earth Sciences↗

USGS2021

Geometry of the décollement below eastern Bangladesh and implications for seismic hazard

Eastern Bangladesh sits on the seismically active Chittagong-Myanmar fold and thrust belt (CMFB), a north-trending accretionary wedge on the eastern side of the India-Eurasia collision. Earthquakes on the basal décollement and associated thrusts within the CMFB present a hazard to this densely populated region. In this study, we interpret 28 seismic reflection profiles from both published and unpublished sources to constrain the depth of the basal décollement. To convert profiles from the time domain to the depth domain, we integrate sonic log and seismic stacking velocity data to generate time-velocity relationships for different parts of the CMFB. Our analysis reveals that the décollement is ∼9 km deep in northeast and southeast Bangladesh, but shallows to ∼5 km in east-central Bangladesh. The décollement has an area of 7.25 × 10 4 km 2 (∼150 × 450 km), making it capable of an Mw 8.5 earthquake. However, the warped geometry of this fault might act as a rupture barrier were a large earthquake to occur on the décollement. Our combined velocity and fault model lay the groundwork for future studies to address seismic segmentation, ground shaking, and rupture modeling in the CMFB. Finally, we use our compiled data set to analyze the evolution of fold kinematics in the CMFB. We observe that folding style and failure mode varies, from mainly ductile deformation in the foreland to mainly brittle in the hinterland. The dual-failure modes within the CMFB support the hypothesis that a region with ductile deformation may still be capable of seismic behavior.

Journal of Geophysical Research: Solid Earth↗