Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2008

Traces and burrowing behaviors of the Cicada nymph Cicadetta calliope: Neoichnology and paleoecological significance of extant soil-dwelling insects

This study documents the traces and burrowing behaviors of nymphs of the prairie cicada Cicadetta calliope (Hemiptera: Cicadidae), as observed in neoichnological experiments. Cicada nymphs were collected from the C horizons of sandy Fluvents along the Kansas River east of Lawrence, Kansas. The nymphs appeared to be fifth instars, 13-17 mm long and 6-7 mm wide. Nymphs were placed in plastic enclosures containing layers of colored, moist, very fine-grained sand. They burrowed immediately, excavating air-filled, sediment-enclosed cells between 20 mm and 40 mm long and averaging 9 mm wide. Burrowing was completed in three stages: (1) sediment in the forward portion of the cell was excavated and rolled into a ball with the forelimbs; (2) the nymph turned 180?? using a forward roll, and moved to the back of the cell; and (3) the sediment ball was pushed up against the back wall of the cell and kneaded with the forelimbs into a thin layer. Resulting burrow traces are sinuous and distinctly meniscate and demonstrate that insect larvae construct meniscate, backfilled burrows in well-drained terrestrial settings. Cicadetta calliope nymphs and their traces are excellent analogs for meniscate trace fossils commonly found in late Paleozoic-Cenozoic alluvial deposits and paleosols. Such meniscate trace fossils are useful for interpreting the paleoenvironment and paleohydrogeology of the units in which they are found. In addition, such backfilled burrows can be used to supplement the fossil record of cicada-like hemipterans, currently known only from the latest Permian to the Early Triassic. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).

Palaios↗
USGS2008

Relationship of floodplain ichnocoenoses to paleopedology, paleohydrology, and paleoclimate in the Willwood Formation, Wyoming, during the Paleocene-Eocene Thermal Maximum

Vertical changes in distribution, abundance, and ichnodiversity of ichnocoenoses in alluvial deposits of the Willwood Formation suggest significantly drier moisture regimes in the Bighorn Basin, Wyoming, during the Paleocene-Eocene Thermal Maximum (PETM), a transient period of global warming. The Willwood Formation at Polecat Bench contains an abundant assemblage of ichnofossils, including various types of rhizoliths and invertebrate trace fossils, such as Naktodemasis bowni, Camborygma litonomos, Edaphichnium lumbricatum, cf. Cylindricum isp., cf. Planolites isp., cf. Steinichnus, and cocoon traces. These comprise six distinct ichnocoenoses, which are categorized as dominantly terraphilic, hygrophilic, or hydrophilic based on the inferred moisture regimes of their most abundant ichnofossil morphotypes and associated pedogenic features, including other trace fossils and rhizoliths. The interpreted moisture regimes correlate well with the paleoenvironments of their host lithofacies, as inferred from sedimentology and paleopedology. Outside the PETM interval at Polecat Bench, abundant avulsion deposits and thin, compound paleosols containing hygrophilic and hydrophilic ichnocoenoses suggest frequent depositional events and predominantly poor to imperfect soil-drainage conditions. Within the PETM interval, thick, cumulative paleosol profiles with abundant terraphilic to hygrophilic ichnocoenoses suggest significantly improved drainage conditions. Lithofacies and ichnocoenoses above the PETM interval are not significantly different from those below the interval, indicating a return to pre-PETM moisture regimes. These conclusions support previous studies that suggest the Bighorn Basin experienced transient drying during this interval. This study demonstrates that ichnocoenoses and their ichnopedologic associations can be used to refine paleohydrologic and paleoclimatic generalizations inferred from paleoclimate models. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).

Palaios↗
USGS2009

Catastrophically buried middle Pennsylvanian sigillaria and calamitean sphenopsids from Indiana, USA: What kind of vegetation was this?

A catastrophically buried stand of calamitean sphenopsids and sigillarian lycopsids is reported from the Middle Pennsylvanian of southwestern Indiana, in the Illinois Basin. The plants were exposed in the highwall of a small surface mine and were rooted in a thin bed of coal (peat), thus representing a flooded and buried swamp surface. Coarse, floodborne silts and sands buried the forest to a depth of <3 m or more, before further incursions of water and sediment truncated the deposit. The rocks are part of the Staunton Formation. Taking up >250 linear meters of exposed highwall surface, the vegetation appears to have been a patchwork of calamitean thickets, with stems perhaps as tall as 3-5 m, within which scattered, but much larger, emergent Sigillaria trees grew, possibly reaching heights of 10-15 m. No ground cover was observed, nor were foliage or reproductive organs attributable to the dominant plants found. The growth of this vegetation in a peat-forming swamp indicates conditions of high water availability, likely in a humid, high-rainfall climate. This kind of plant assemblage, however, cannot be characterized as a rain forest, given that it consisted of medium-height thickets of horsetails with scattered, emergent, and polelike, giant lycopsids, thus lacking a closed upper canopy and possibly only partially shading the ground. Copyright ?? 2009, SEPM (Society for Sedimentary Geology).

Palaios↗
USGS2010

Using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) to explore geochemical taphonomy of vertebrate fossils in the upper cretaceous two medicine and Judith River formations of Montana

Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) was used to determine rare earth element (REE) content of 76 fossil bones collected from the Upper Cretaceous (Campanian) Two Medicine (TMF) and Judith River (JRF) Formations of Montana. REE content is distinctive at the formation scale, with TMF samples exhibiting generally higher overall REE content and greater variability in REE enrichment than JRF samples. Moreover, JRF bones exhibit relative enrichment in heavy REE, whereas TMF bones span heavy and light enrichment fields in roughly equal proportions. TMF bones are also characterized by more negative Ce anomalies and greater U enrichment than JRF bones, which is consistent with more oxidizing diagenetic conditions in the TMF. Bonebeds in both formations show general consistency in REE content, with no indication of spatial or temporal mixing within sites. Previous studies, however, suggest that the bonebeds in question are attritional assemblages that accumulated over considerable time spans. The absence of geochemical evidence for mixing is consistent with diagenesis transpiring in settings that remained chemically and hydrologically stable during recrystallization. Lithology-related patterns in REE content were also compared, and TMF bones recovered from fluvial sandstones show relative enrichment in heavy REE when compared with bones recovered from fine-grained floodplain deposits. In contrast, JRF bones, regardless of lithologic context (sandstone versus mudstone), exhibit similar patterns of REE uptake. This result is consistent with previous reconstructions that suggest that channel-hosted microfossil bonebeds of the JRF developed via the reworking of preexisting concentrations embedded in the interfluve. Geochemical data further indicate that reworked elements were potentially delivered to channels in a recrystallized condition, which is consistent with rapid adsorption of REE postmortem. Copyright ?? 2010, SEPM (Society for Sedimentary Geology).

Palaios↗
USGS2011

An improved understanding of the Alaska coastal current: The application of a bivalve growth-temperature model to reconstruct freshwater-influenced paleoenvironments

Shells of intertidal bivalve mollusks contain sub-seasonally to interannually resolved records of temperature and salinity variations in coastal settings. Such data are essential to understand changing land-sea interactions through time, specifically atmospheric (precipitation rate, glacial meltwater, river discharge) and oceanographic circulation patterns; however, independent temperature and salinity proxies are currently not available. We established a model for reconstructing daily water temperatures with an average standard error of ???1.3 ??C based on variations in the width of lunar daily growth increments of Saxidomus gigantea from southwestern Alaska, United States. Temperature explains 70% of the variability in shell growth. When used in conjunction with stable oxygen isotope data, this approach can also be used to identify changes in past seawater salinity. This study provides a better understanding of the hydrological changes related to the Alaska Coastal Current (ACC). In combination with ??18Oshell values, increment-derived temperatures were used to estimate salinity changes with an average error of 1.4 ?? 1.1 PSU. Our model was calibrated and tested with modern shells and then applied to archaeological specimens. As derived from the model, the time interval of 988-1447 cal yr BP was characterized by ???1-2 ??C colder and much drier (2-5 PSU) summers. During that time, the ACC was likely flowing much more slowly than at present. In contrast, between 599-1014 cal yr BP, the Aleutian low may have been stronger, which resulted in a 3 ??C temperature decrease during summers and 1-2 PSU fresher conditions than today; the ACC was probably flowing more quickly at that time. The shell growth-temperature model can be used to estimate seasonal to interannual salinity and temperature changes in freshwater-influenced environments through time. ?? 2011 SEPM (Society for Sedimentary Geology).

Palaios↗
USGS2001

High resolution study of petroleum source rock variation, Lower Cretaceous (Hauterivian and Barremian) of Mikkelsen Bay, North Slope, Alaska

Open File Report 01-480 was designed as a large format poster for the Annual Meeting of the American Association of Petroleum Geologists and the Society for Sedimentary Geology in Denver Colorado in June 2001. It is reproduced here in digital format to make widely available some unique images of mudstones. The images include description, interpretation, and Rock-Eval data that resulted from a high-resolution study of petroleum source rock variation of the Lower Cretaceous succession of the Mobil-Phillips Mikkelsen Bay State #1 well on the North Slope of Alaska. Our mudstone samples with Rock-Eval data plus color images are significant because they come from one of the few continuously cored and complete intervals of the Lower Cretaceous succession on the North Slope. This succession, which is rarely preserved in outcrop and very rarely cored in the subsurface, is considered to include important petroleum source rocks that have not previously been described nor explained Another reason these images are unique is that the lithofacies variability within mudstone dominated successions is relatively poorly known in comparison with that observed in coarser clastic and carbonate successions. They are also among the first published scans of thin sections of mudstone, and are of excellent quality because the sections are well made, cut perpendicular to bedding, and unusually thin, 20 microns. For each of 15 samples, we show a thin section scan (cm scale) and an optical photomicrograph (mm scale) that illustrates the variability present. Several backscattered SEM images are also shown. Rock-Eval data for the samples can be compared with the textures and mineralogy present by correlating sample numbers and core depth.

Open-File Report↗
USGS2012

West-east lithostratigraphic cross section of Cretaceous rocks from central Utah to western Kansas

A west-east lithostratigraphic cross section of the Cretaceous rocks from central Utah to western Kansas was prepared as part of the former Western Interior Cretaceous (WIK) project, which was part of the Global Sedimentary Geology Program started in 1989. This transect is similar to that published by Dyman and others (1994) as a summary paper of the WIK project but extends further east and is more detailed. Stratigraphic control was provided by 32 geophysical logs and measured sections tied to ammonite and Inoceramus faunal zones. A variable datum was used, including the base of the Castlegate Sandstone for the western part of the section, and the fossil ammonite zone Baculites obtusus for the middle and eastern section. Lower Cretaceous units and the Frontier Formation and Mowry Shale are shown as undifferentiated units. Cretaceous strata along the transect range in thickness from more than 7,000 ft in the structural foredeep of the western overthrust belt in central Utah, to about 11,000 ft near the Colorado-Utah border as a result of considerable thickening of the Mesaverde Group, to less than 3,500 ft in the eastern Denver Basin, Kansas resulting in a condensed section. The basal Mancos Shale rises stepwise across the transect becoming progressively younger to the west as the Western Interior Seaway transgressed westward. The section illustrates large scale stratigraphic relations for most of the area covered by the seaway, from central Utah, Colorado, to west-central Kansas. These strata are predominantly continental and shoreline deposits near the Sevier thrust belt in Utah, prograding and regressive shorelines to the east with associated flooding surfaces, downlapping mudstones, and transgressive parasequences (shoreface) that correlate to condensed zones across the seaway in central Colorado and eastern Denver Basin.

Colorado;Kansas;Utah↗
USGS2015

Chronostratigraphic cross section of Cretaceous formations in western Montana, western Wyoming, eastern Utah, northeastern Arizona, and northwestern New Mexico, U.S.A.

The chronostratigraphic cross section presented herein is a contribution to the Western Interior Cretaceous (WIK) project of the Global Sedimentary Geology Program. It portrays the Cretaceous formations at 13 localities in a south-trending transect from northwestern Montana through western Wyoming, eastern Utah, and northeastern Arizona, to northwestern New Mexico. The localities are in the Rocky Mountains and on the Colorado Plateau and contain strata that were deposited along the western margin of the Cretaceous Interior Seaway of North America. These strata are marine and nonmarine, mainly siliceous and calcareous, and of Aptian through Maastrichtian ages. They range in thickness from nearly 19,000 feet (ft) in southwestern Montana to about 1,500 ft thick in northeastern Arizona and northwestern New Mexico. Cretaceous formations in western Montana, western Wyoming, and eastern Utah disconformably overlie Jurassic rocks and locally include beds of either Aptian and Albian ages or Albian age. The Aptian beds consist of various lithologies of nonmarine origin. Albian beds consist of various nonmarine and marine lithologies. The Lower Cretaceous strata range in thickness from 4,300 ft in northern Utah to 180 ft in southern Utah and are absent at localities in Arizona and New Mexico. Upper Cretaceous strata at most localities in the transect include beds of Cenomanian through Maastrichtian ages, although at five of the localities in Montana, Wyoming, Utah, Arizona, and New Mexico, younger strata are missing. Beds of Cenomanian, Turonian, Coniacian, Santonian, and Campanian ages in the region are siliceous, calcareous, or bentonitic and were deposited in marine and nonmarine environments. In the following Maastrichtian, siliceous lithologies accumulated in nonmarine environments. Thicknesses of the Upper Cretaceous strata range from more than 17,000 ft in southwestern Montana to nearly 6,000 ft in northwestern New Mexico. In this transect for time-stratigraphic units of the Cretaceous, lateral changes in lithologies, regional differences in thicknesses, and the abundance of associated disconformities possibly reflect local and regional tectonic events. Examples of evidence of those events follow: (1) Disconformities and the absence of strata of lowest Cretaceous age in western Montana, western Wyoming, and northern Utah indicate significant tectonism and erosion probably during the Late Jurassic and earliest Cretaceous; ( 2) stages of Upper Cretaceous deposition in the transect display major lateral changes in thickness, which probably reflect regional and local tectonism.

Arizona, Montana, New Mexico, Utah, Wyoming↗
USGS2018

Rio Grande transboundary integrated hydrologic model and water-availability analysis, New Mexico and Texas, United States, and Northern Chihuahua, Mexico

Errata **September 28, 2018: The purpose of a USGS Open-file report (OFR) is dissemination of information that must be released immediately to fill a public need or information that is not sufficiently refined to warrant publication in one of the other USGS series. As part of that refinement process, an error was discovered in one of the input data sets of the Rio Grande Transboundary Integrated Hydrologic Model (RGTIHM) that this OFR was based upon. The error involved the assignment of storage properties to “phantom cells.” Phantom cells are required for most variants of MODFLOW that use a structured finite-difference grid when individual stratigraphic layers are represented as separate layers. Using phantom cells is a common practice that allows separate model layers to be maintained without having to combine stratigraphic layers into equivalent model layers or to use an unstructured grid. Typically, phantom cell horizontal hydraulic conductivities and storage properties are set to a small number and vertical hydraulic conductivities are set to a number large enough to allow vertical flow between the vertically adjacent layers. In the RGTIHM, the specific storage properties of the phantom cells for the upper (RGTIHM layers 3 and 4), middle (RGTIHM layers 5 and 6), and lower (RGTIHM layers 7 and 8) members of the Santa Fe Group were inadvertently assigned a value of 1 feet -1 . The revision of these specific storage values to a small number (1.0 x 10 -09 feet -1 ) required additional trial-and-error model calibration and a new sensitivity analysis. After calibration, the overall model fit remained similar to the fit described in the OFR, but the fit for many individual features such as project water available for diversions at the American Canal and Acequia Madre improved due to the reduction in flow coming from lower layers. Overall, there is still an average net depletion of groundwater flow, and the conclusions of the report are not changed. The revised average annual groundwater flow depletion simulated for the period 1953-2014 is -1,480 acre-feet/year for the entire model region, and -3,660 acre-feet/year for the portion of the model in the United States. The final version of the model will be the basis of the USGS Scientific Investigations Report that will supersede this OFR. An updated Model Archive of RGTIHM is available upon request to the USGS California Water Science Center. The corrected version of the model WAS the basis for the USGS Scientific Investigations Report that SUPERSEDED this Open-File Report.** Abstract Changes in population, agricultural development and practices (including shifts to more water-intensive crops), and climate variability are increasing demands on available water resources, particularly groundwater, in one of the most productive agricultural regions in the Southwest—the Rincon and Mesilla Valley parts of Rio Grande Valley, Doña Ana and Sierra Counties, New Mexico, and El Paso County, Texas. The goal of this study was to produce an integrated hydrological simulation model to help evaluate water-management strategies, including conjunctive use of surface water and groundwater for historical conditions, and to support long-term planning for the Rio Grande Project. This report describes model construction and applications by the U.S. Geological Survey, working in cooperation and collaboration with the Bureau of Reclamation. This model, the Rio Grande Transboundary Integrated Hydrologic Model, simulates the most important natural and human components of the hydrologic system, including selected components related to variations in climate, thereby providing a reliable assessment of surface-water and groundwater conditions and processes that can inform water users and help improve planning for future conditions and sustained operations of the Rio Grande Project (RGP) by the Bureau of Reclamation. Model development included a revision of the conceptual model of the flow system, construction of a Transboundary Rio Grande Watershed Model (TRGWM) water-balance model using the Basin Characterization Model (BCM), and construction of an integrated hydrologic flow model with MODFLOW-One-Water Hydrologic Flow Model (referred to as One Water). The hydrologic models were developed for and calibrated to historical conditions of water and land use, and parameters were adjusted so that simulated values closely matched available measurements (calibration). The calibrated model was then used to assess the use and movement of water in the Rincon Valley, Mesilla Basin, and northern part of the Conejos-Médanos Basin, with the entire region referred to as the “Transboundary Rio Grande” or TRG. These tools provide a means to understand hydrologic system response to the evolution of water use in the region, its availability, and potential operational constraints of the RGP. The conceptual model identified surface-water and groundwater inflows and outflows that included the movement and use of water both in natural and in anthropogenic systems. The groundwater-flow system is characterized by a layered geologic sedimentary sequence combined with the effects of groundwater pumping, operation of the RGP, natural runoff and recharge, and the application of irrigation water at the land surface that is captured and reused in an extensive network of canals and drains as part of the conjunctive use of water in the region. Historical groundwater-level fluctuations followed a cyclic pattern that were aligned with climate cycles, which collectively resulted in alternating periods of wet or dry years. Periods of drought that persisted for one or more years are associated with low surface-water availability that resulted in higher rates of groundwater-level decline. Rates of groundwater-level decline also increased during periods of agricultural intensification, which necessitated increasing use of groundwater as a source of irrigation water. Agriculture in the area was initially dominated by alfalfa and cotton, but since 1970 more water-intensive pecan orchards and vegetable production have become more common. Groundwater levels substantially declined in subregions where drier climate combined with increased demand, resulting in periods of reduced streamflows. Most of the groundwater was recharged in the Rio Grande Valley floor, and most of the pumpage and aquifer storage depletion was in Mesilla Basin agricultural subregions. A cyclic imbalance between inflows and outflows resulted in the modeled cyclic depletion (groundwater withdrawals in excess of natural recharge) of the groundwater basin during the 75-year simulation period of 1940–2014. Changes in groundwater storage can vary considerably from year to year, depending on land use, pumpage, and climate conditions. Climatic drivers of wet and dry years can greatly affect all inflows, outflows, and water use. Although streamflow and, to a minor extent, precipitation during inter-decadal wet-year periods replenished the groundwater historically, contemporary water use and storage depletion could have reduced the effects of these major recharge events. The average net groundwater flow-rate deficit for 1953–2014 was estimated to be about 8,990 acre-feet per year.

New Mexico, Northern Chihuahua, Texas↗
USGS2014

Hydrologic models and analysis of water availability in Cuyama Valley, California

Changes in population, agricultural development practices (including shifts to more water-intensive crops), and climate variability are placing increasingly larger demands on available water resources, particularly groundwater, in the Cuyama Valley, one of the most productive agricultural regions in Santa Barbara County. The goal of this study was to produce a model capable of being accurate at scales relevant to water management decisions that could be considered in the evaluation of the sustainable water supply. The Cuyama Valley Hydrologic Model (CUVHM) was designed to simulate the most important natural and human components of the hydrologic system, including components dependent on variations in climate, thereby providing a reliable assessment of groundwater conditions and processes that can inform water users and help to improve planning for future conditions. Model development included a revision of the conceptual model of the flow system, construction of a precipitation-runoff model using the Basin Characterization Model (BCM), and construction of an integrated hydrologic flow model with MODFLOW-One-Water Hydrologic Flow Model (MF-OWHM). The hydrologic models were calibrated to historical conditions of water and land use and, then, used to assess the use and movement of water throughout the Valley. These tools provide a means to understand the evolution of water use in the Valley, its availability, and the limits of sustainability. The conceptual model identified inflows and outflows that include the movement and use of water in both natural and anthropogenic systems. The groundwater flow system is characterized by a layered geologic sedimentary sequence that—in combination with the effects of groundwater pumping, natural recharge, and the application of irrigation water at the land surface—displays vertical hydraulic-head gradients. Overall, most of the agricultural demand for water in the Cuyama Valley in the initial part of the growing season is supplied by groundwater, which is augmented by precipitation during wet winter and spring seasons. In addition, the amount of groundwater used for irrigation varies from year to year in response to climate variation and can increase dramatically in dry years. Model simulation results, however, also indicated that irrigation may have been less efficient during wet years. Agricultural pumpage is a major component to simulated outflow that is often poorly recorded. Therefore, an integrated, coupled farm-process model is used to estimate historical pumpage for water-balance subregions that evolved with the development of groundwater in the Valley from 1949 through 2010. The integrated hydrologic model includes these water-balance subregions and delineates natural, municipal, and agricultural land use; streamflow networks; and groundwater flow systems. The redefinition of the geohydrologic framework (including the internal architecture of the sedimentary units) and incorporation of these units into the simulation of the regional groundwater flow system indicated that faults have compartmentalized the alluvial deposits into subregions, which have responded differently to regional groundwater flow, locations of recharge, and the effects of development. The Cuyama Valley comprises nine subregions grouped into three regional zones, the Main, Ventucopa Uplands, and Sierra Madre Foothills, which are fault bounded, represent different proportions of the three alluvial aquifers, and have different water quality. The CUVHM uses MF-OWHM to simulate and assess the use and movement of water, including the evolution of land use and related water-balance regions. The model is capable of being accurate at annual to interannual time frames and at subregional to valley-wide spatial scales, which allows for analysis of the groundwater hydrologic budget for the water years 1950–2010, as well as potential assessment of the sustainable use of groundwater. Simulated changes in storage over time showed that significant withdrawals from storage generally occurred not only during drought years (1976–77 and 1988–92) but also during the early stages of industrial agriculture, which was initially dominated by alfalfa production. Since the 1990s, agriculture has shifted to more water-intensive crops. Measured and simulated groundwater levels indicated substantial declines in selected subregions, mining of groundwater that is thousands to tens of thousands of years old, increased groundwater storage depletion, and land subsidence. Most of the recharge occurs in the upland regions of Ventucopa and Sierra Madre Foothills, and the largest fractions of pumpage and storage depletion occur in the Main subregion. The long-term imbalance between inflows and outflows resulted in simulated overdraft (groundwater withdrawals in excess of natural recharge) of the groundwater basin over the 61-year period of 1949–2010. Changes in storage varied considerably from year to year, depending on land use, pumpage, and climate conditions. Climatically driven factors can greatly affect inflows, outflows, and water use by more than a factor of two between wet and dry years. Although precipitation during inter-decadal wet years previously replenished the basin, the water use and storage depletion have lessened the effects of these major recharge events. Simulated and measured water-level altitudes indicated the presence of large areas where depressed water levels have resulted in large desaturated zones in the younger and Older Alluvium layers in the Main-zone subregions. The results of modeled projection of the base-case scenario 61 years into the future indicated that current supply-and-demand are unsustainable and will result in additional groundwater-level declines and related storage depletion and land subsidence. The reduced-supply and reduced-demand projections reduced groundwater storage depletion but may not allow for sustainable agriculture under current demands, agricultural practices, and land use.

California↗
USGS2020

Rio Grande transboundary integrated hydrologic model and water-availability analysis, New Mexico and Texas, United States, and northern Chihuahua, Mexico

Changes in population, agricultural development and practices (including shifts to more water-intensive crops), and climate variability are increasing demands on available water resources, particularly groundwater, in one of the most productive agricultural regions in the Southwest—the Rincon and Mesilla Valley parts of Rio Grande Valley, Doña Ana and Sierra Counties, New Mexico, and El Paso County, Texas. The goal of this study was to produce an integrated hydrological simulation model to help evaluate water-management strategies, including conjunctive use of surface water and groundwater for historical conditions, and to support long-term planning for the Rio Grande Project. This report describes model construction and applications by the U.S. Geological Survey, working in cooperation and collaboration with the Bureau of Reclamation. This model, the Rio Grande Transboundary Integrated Hydrologic Model, simulates the most important natural and human components of the hydrologic system, including selected components related to variations in climate, thereby providing a reliable assessment of surface-water and groundwater conditions and processes that can inform water users and help improve planning for future conditions and sustained operations of the Rio Grande Project (RGP) by the Bureau of Reclamation. Model development included a revision of the conceptual model of the flow system, construction of a Transboundary Rio Grande Watershed Model (TRGWM) water-balance model using the Basin Characterization Model, and construction of an integrated hydrologic flow model with MODFLOW-One-Water Hydrologic Flow Model version 2 (referred to as MF-OWHM2). The hydrologic models were developed for and calibrated to historical conditions of water and land use, and parameters were adjusted so that simulated values closely matched available measurements (calibration). The calibrated model was then used to assess the use and movement of water in the Rincon Valley, Mesilla Basin, and northern part of the Conejos-Médanos Basin, with the entire region referred to as the “Transboundary Rio Grande” or TRG. These tools provide a means to understand hydrologic system response to the evolution of water use in the region, its availability, and potential operational constraints of the RGP. The conceptual model identified surface-water and groundwater inflows and outflows that included the movement and use of water both in natural and in anthropogenic systems. The groundwater-flow system is characterized by a layered geologic sedimentary sequence combined with the effects of groundwater pumping, operation of the RGP, natural runoff and recharge, and the application of irrigation water at the land surface that is captured and reused in an extensive network of canals and drains as part of the conjunctive use of water in the region. Historical groundwater-level fluctuations followed a cyclic pattern that were aligned with climate cycles, which collectively resulted in alternating periods of wet or dry years. Periods of drought that persisted for one or more years are associated with low surface-water availability that resulted in higher rates of groundwater-level decline. Rates of groundwater-level decline also increased during periods of agricultural intensification, which necessitated increasing use of groundwater as a source of irrigation water. Agriculture in the area was initially dominated by alfalfa and cotton, but since 1970 more water-intensive pecan orchards and vegetable production have become more common. Groundwater levels substantially declined in subregions where drier climate combined with increased demand, resulting in periods of reduced streamflows. Most of the groundwater was recharged in the Rio Grande Valley floor, and most of the pumpage and aquifer storage depletion was in Mesilla Basin agricultural subregions. A cyclic imbalance between inflows and outflows resulted in the modeled cyclic depletion (groundwater withdrawals in excess of natural recharge) of the groundwater basin during the 75-year simulation period of 1940–2014. Changes in groundwater storage can vary considerably from year to year, depending on land use, pumpage, and climate conditions. Climatic drivers of wet and dry years can greatly affect all inflows, outflows, and water use. Although streamflow and, to a minor extent, precipitation during inter-decadal wet-year periods replenished the groundwater historically, contemporary water use and storage depletion could have reduced the effects of these major recharge events. The average net groundwater flow-rate deficit for 1953–2014 was estimated to be about 1,090 acre-feet per year.

Chihuahua, New Mexico, Texas↗
USGS2010

Geological Impacts and Sedimentary Record of the February 27, 2010, Chile Tsunami-La Trinchera to Concepcion

The February 27, 2010, Chilean tsunami substantially altered the coastal landscape and left a permanent depositional record that may be preserved at many locales along the central coast of Chile. From April 24 to May 2, 2010, a team of U.S. Geological Survey (USGS) and Chilean scientists examined the geological impacts of the tsunami at five sites along a 200-km segment of coast centered on the earthquake epicenter. Significant observations include: (1) substantial tsunami-induced erosion and deposition (+/- 1 m) on the coastal plain; (2) erosion from return flow, inundation scour around the bases of trees, and widespread planation of the land surface; (3) tsunami sand deposits at all sites that extended to near the limit of inundation except at one site; (4) evidence of multiple strong onshore waves that arrived at different times and from different directions; (5) vegetation height and density controlled the thickness of tsunami deposits at one site, (6) the abundance of layers of plane-parallel stratification in some deposits and the presence of large bedforms at one site indicated at least some of the sediment was transported as bed load and not as suspended load; (7) shoreward transport of mud boulders and rock cobbles where they were available; and (8) the maximum tsunami inundation distance (2.35 km) was up an alluvial valley. Most of the tsunami deposits were less than 25 cm thick, which is consistent with tsunami-deposit thicknesses found elsewhere (for example, Papua New Guinea, Peru, Sumatra, Sri Lanka). Exceptions were the thick tsunami deposits near the mouths of Rio Huenchullami (La Trinchera) and Rio Maule (Constitucion), where the sediment supply was abundant. The substantial vertical erosion of the coastal plain at Constitucion

Open-File Report↗
USGS2005

1-D/3-D geologic model of the Western Canada Sedimentary Basin

The 3-D geologic model of the Western Canada Sedimentary Basin comprises 18 stacked intervals from the base of the Devonian Woodbend Group and age equivalent formations to ground surface; it includes an estimated thickness of eroded sediments based on 1-D burial history reconstructions for 33 wells across the study area. Each interval for the construction of the 3-D model was chosen on the basis of whether it is primarily composed of petroleum system elements of reservoir, hydrocarbon source, seal, overburden, or underburden strata, as well as the quality and areal distribution of well and other data. Preliminary results of the modeling support the following interpretations. Long-distance migration of hydrocarbons east of the Rocky Mountains is indicated by oil and gas accumulations in areas within which source rocks are thermally immature for oil and (or) gas. Petroleum systems in the basin are segmented by the northeast-trending Sweetgrass Arch; hydrocarbons west of the arch were from source rocks lying near or beneath the Rocky Mountains, whereas oil and gas east of the arch were sourced from the Williston Basin. Hydrocarbon generation and migration are primarily due to increased burial associated with the Laramide Orogeny. Hydrocarbon sources and migration were also influenced by the Lower Cretaceous sub-Mannville unconformity. In the Peace River Arch area of northern Alberta, Jurassic and older formations exhibit high-angle truncations against the unconformity. Potential Paleozoic though Mesozoic hydrocarbon source rocks are in contact with overlying Mannville Group reservoir facies. In contrast, in Saskatchewan and southern Alberta the contacts are parallel to sub-parallel, with the result that hydrocarbon source rocks are separated from the Mannville Group by seal-forming strata within the Jurassic. Vertical and lateral movement of hydrocarbons along the faults in the Rocky Mountains deformed belt probably also resulted in mixing of oil and gas from numerous source rocks in Alberta.

Mountain Geologist↗
USGS2026

Method development and validation for microscopic measurement of the fluorescence spectrum of sedimentary organic matter in geologic samples

The goal of this study was to develop and validate a standard operating procedure for measuring the fluorescence emission of sedimentary organic matter (SOM), a proxy used to assess thermal maturity conditions in petroliferous basins. We tested the performance of a spectrometer integrated with an epi-fluorescence imaging microscope, and evaluated instrument calibration, dark-current correction, time duration for instrument stabilization, light delivery optimization, and the number of measurements necessary to optimize precision. These tests were used to guide instrument operation, ensure measurement accuracy, and characterize performance limitations of the system as SOM transitions to higher thermal maturity with accompanying signal deterioration. Adhering to these newly established guidelines enhances the reproducibility of fluorescence spectroscopy measurements. More importantly, this work endeavors to reach the overall objective of demonstrating the utility of fluorescence spectroscopy for evaluating the thermal maturity of SOM. Method for fluorescence spectroscopy of sedimentary organic matter. Internal calibration via diffuse halogen light reflected from polytetrafluoroethylene (PTFE). Evaluates emission response via λ max and red-green and blue-green quotients.

MethodsX↗
USGS1993

Surface-water-quality assessment of the Yakima River basin in Washington: Analysis of major and minor elements in fine-grained streambed sediment, 1987

Fine-grained streambed sediment from the Yakima River Basin was sampled from 448 locations and analyzed for 45 elements. Anomalous major- and minor-element concentrations were based on baseline values established from element concentrations in streambed sediment in the basin. The largest number of anomalies occurred for antimony, arsenic, cerium, copper, and zinc; at least 10 percent of these element concentrations exceeded the threshold values of 0.7 mg/g (micrograms per gram), 8.5 mg/g, 57 mg/g, 40 mg/g, and 120 mg/g, respectively. Concentrations of arsenic as large as 31 and 61 mg/g occurred in streambed sediment formed from the pre-Tertiary metamorphic and intrusive rocks geologic unit and from the nonmarine sedimentary rocks geologic unit, respectively. These geologic units were probable sources of arsenic to smaller headwater streams; however, arsenic concentrations from these geologic sources rapidly attenuated downstream in the Yakima River. Geologic sources of arsenic were generally small in agricultural land-use areas; however, concentrations as large as 140 mg/g were found in samples of soils that were historically treated with the lead-arsenate pesticide. In addition, concentrations of lead, as large as 890 mg/g, occurred in these pesticide- treated soils. Streambed sediment formed from the pre-Tertiary metamorphic and intrusive rocks geologic unit also contained concentrations as large as 1,700 mg/g for chromium, 140 mg/g for cobalt, and 1,900 mg/g for nickel. Like arsenic, concentrations of chromium (in addition to mercury and nickel) were attenuated in the Yakima River. The application of zinc sulphate to orchards was probably responsible for concentrations of zinc as large as 150 mg/g in soils of and 180 mg/g in streambed sediment from the agricultural land-use area.

Washington↗
USGS2013

Differential preservation in the geologic record of intraoceanic arc sedimentary and tectonic processes

Records of ancient intraoceanic arc activity, now preserved in continental suture zones, are commonly used to reconstruct paleogeography and plate motion, and to understand how continental crust is formed, recycled, and maintained through time. However, interpreting tectonic and sedimentary records from ancient terranes after arc–continent collision is complicated by preferential preservation of evidence for some arc processes and loss of evidence for others. In this synthesis we examine what is lost, and what is preserved, in the translation from modern processes to the ancient record of intraoceanic arcs. Composition of accreted arc terranes differs as a function of arc–continent collision geometry. ‘Forward-facing’ collision can accrete an oceanic arc on to either a passive or an active continental margin, with the arc facing the continent and colliding trench- and forearc-side first. In a ‘backward-facing’ collision, involving two subduction zones with similar polarity, the arc collides backarc-first with an active continental margin. The preservation of evidence for contemporary sedimentary and tectonic arc processes in the geologic record depends greatly on how well the various parts of the arc survive collision and orogeny in each case. Preservation of arc terranes likely is biased towards those that were in a state of tectonic accretion for tens of millions of years before collision, rather than tectonic erosion. The prevalence of tectonic erosion in modern intraoceanic arcs implies that valuable records of arc processes are commonly destroyed even before the arc collides with a continent. Arc systems are most likely to undergo tectonic accretion shortly before forward-facing collision with a continent, and thus most forearc and accretionary-prism material in ancient arc terranes likely is temporally biased toward the final stages of arc activity, when sediment flux to the trench was greatest and tectonic accretion prevailed. Collision geometry and tectonic erosion vs. accretion are important controls on the ultimate survival of material from the trench, forearc, arc massif, intra-arc basins, and backarc basins, and thus on how well an ancient arc terrane preserves evidence for tectonic processes such as subduction of aseismic ridges and seamounts, oblique plate convergence, and arc rifting. Forward-facing collision involves substantial recycling, melting, and fractionation of continent-derived material during and after collision, and so produces melts rich in silica and incompatible trace elements. As a result, forward-facing collision can drive the composition of accreted arc crust toward that of average continental crust.

Earth-Science Reviews↗