Geology of the Galice quadrangle, Oregon
Explore the source record for details and available documents.
Geologic Quadrangle↗
SEARCH · Search USGS
Results for “Oregon Geology”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Groundwater resources of the Harney Basin, southeastern Oregon
In response to increasing groundwater demand and declining groundwater levels in the Harney Basin of southeastern Oregon, the U.S. Geological Survey and the Oregon Water Resources Department conducted a cooperative groundwater-availability study during 2016–22. This Fact Sheet summarizes the results of this study. Full details of the study are provided in Gingerich and others (2022a, 2022b), Garcia and others (2022), and the other supporting documents listed on the last page of this Fact Sheet.
Oregon↗
Sections showing biostratigraphy and correlation of Tertiary rocks penetrated in wells drilled on the southern Oregon continental margin
Geologic interpretation of seismic reflection profiles on the Continental Shelves of Oregon and Washington is measurably enhanced through the knowledge of Tertiary subsurface stratigraphy penetrated in 10 deep exploration wells drilled in the mid-1960's (Braislin and others, 1971; Snavely and others, 1977). These subsurface data make it possible to relate to the acoustic units differentiated on seismic-reflection profiles to time-stratigraphic units as determined from micropalentontological studies of samples collected from these wells. These biostratigraphic data also permit correlations between time-stratigraphic units in the offshore test wells and between those units and formations penetrated in onshore test wells, as well as strata that crop out in coastal Oregon and Washington.
Oregon↗
New geologic mapping of the northwestern Willamette Valley, Oregon, and its American Viticultural Areas (AVAs)—A foundation for understanding their terroir
A geologic map of the greater Portland, Oregon, metropolitan area is planned that will document the region’s complex geology (currently in review: “Geologic map of the greater Portland metropolitan area and surrounding region, Oregon and Washington,” by Wells, R.E., Haugerud, R.A., Niem, A., Niem, W., Ma, L., Evarts, R., Madin, I., and others). The map, which is planned to be published as a U.S. Geological Survey Scientific Investigations Map, will consist of 51 7.5′ quadrangles covering more than 2,500 square miles, and it will represent more than 100 person-years of geologic mapping and studies. The region was mapped at the relatively detailed scale of 1:24,000 to improve understanding of its geology and its earthquake hazards. More than 100 geologic map units will record the 50-million-year history of volcanism, sedimentation, folding, and faulting above the Cascadia Subduction Zone. The geology contributes to the varied terroir of four American Viticultural Areas (AVAs) in the northwestern Willamette Valley: the Yamhill-Carlton, Dundee Hills, Chehalem Mountains, and Ribbon Ridge AVAs. Terroir is defined as the environmental conditions, especially climate and soils, that influence the quality and character of a region’s crops—in this case, grapes for wine. On this new poster (“New geologic mapping of the northwestern Willamette Valley, Oregon, and its American Viticultural Areas (AVAs)—A foundation for understanding their terroir”), we present the geologic map at a reduced scale (about 1:175,000) to show the general distribution of geologic map units, and we highlight, discuss, and illustrate six major geologic events that helped shape the region and form its terrior. We also discuss the geologic elements that contribute to the character of each of the four AVAs in the northwestern Willamette Valley.
Oregon↗
Complex landslide patterns explained by local intra-unit variability of stratigraphy and structure: Case study in the Tyee Formation, Oregon, USA
Lithology and geologic structure are important controls on landslide susceptibility and are incorporated into many regional landslide hazard models. Typically, metrics for mapped geologic units are used as model input variables and a single set of values for material strength are assumed, regardless of spatial heterogeneities that may exist within a map unit. Here we describe how differences in bedding thickness, grain size, inferred uniaxial compressive strength, and bedding dip control the inherent susceptibility of slopes to deep-seated failure within a single mapped geologic unit - the Tyee Formation of Oregon, USA. The Tyee, which covers over 15,000 km2 and underlies much of the Oregon Coast Range, comprises gently folded alternating beds of sandstone and siltstone deposited as turbidites, forming a 2-km thick Eocene submarine fan which has been uplifted and exhumed through the Cenozoic. Deep-seated landslides are widespread in the Tyee, but form a complex spatial pattern such that landslide density ranges from 0 to 24% of the total landscape area. These slides are often extensive and sufficiently deep to reduce local hillslope gradients, resulting in a strong negative correlation between landslide density and mean local slope. Mean annual precipitation and predicted strong ground motions from Cascadia earthquake scenarios also fail to explain the spatial distribution of deep-seated landslides. Consequently, landslide stability models, which are strongly influenced by landscape slope, pore-water pressure, and seismic acceleration, yield landslide susceptibility maps which are broadly anti-correlated with mapped deep-seated landslide density. Through a multivariable linear regression model, we show that much of the variance in deep-seated landslide density can be explained by variability of intra-unit stratigraphic and structural characteristics, which we measure at 128 sites across two study areas totaling ∼3000 km2. Our results suggest bedding dip is only weakly correlated to landslide density, but strongly influences landslide failure style. Subtle increases in bedding dip, even in the gently folded Tyee Formation, result in a substantially higher likelihood of a landslide being cataclinal, or parallel to bedding. Overall, we find a slight majority of landslides fail within these cataclinal slopes, and that these landslides tend to be larger than non-cataclinal landslides. We also show that the lithological and structural properties that influence landslide susceptibility are distinct for these two populations of landslides. Our results demonstrate how localized, intra-unit, geologic variability can exert strong control on landslide susceptibility and failure style. This suggests that in some locations, landslide hazard models could be significantly improved by incorporating detailed, spatially variable, geologic properties rather than relying solely on generalized geologic map units.
Oregon↗
Geologic Map of the Carlton Quadrangle, Yamhill County, Oregon
The Carlton, Oregon, 7.5-minute quadrangle is located in northwestern Oregon, about 35 miles (57 km) southwest of Portland. It encompasses the towns of Yamhill and Carlton in the northwestern Willamette Valley and extends into the eastern flank of the Oregon Coast Range. The Carlton quadrangle is one of several dozen quadrangles being mapped by the U.S. Geological Survey (USGS) and the Oregon Department of Geology and Mineral Industries (DOGAMI) to provide a framework for earthquake- hazard assessments in the greater Portland, Oregon, metropolitan area. The focus of USGS mapping is on the structural setting of the northern Willamette Valley and its relation to the Coast Range uplift. Mapping was done in collaboration with soil scientists from the National Resource Conservation Service, and the distribution of geologic units is refined over earlier regional mapping (Schlicker and Deacon, 1967). Geologic mapping was done on 7.5-minute topographic base maps and digitized in ArcGIS to produce ArcGIS geodatabases and PDFs of the map and text. The geologic contacts are based on numerous observations and samples collected in 2002 and 2003, National Resource Conservation Service soils maps, and interpretations of 7.5-minute topography. The map was completed before new, high-resolution laser terrain mapping was flown for parts of the northern Willamette Valley in 2008.
Open-File Report↗
1976 water-quality data in Bear Creek basin, Medford, Oregon
The U.S. Geological Survey, in cooperation with the Rogue Valley Council of Governments, is studying surface-water-quality problems and their causes in the Bear Creek basin of southwestern Oregon. Two specific areas of investigation include: measurements of the quality and quantity of water in the irrigation canals and drainage system and the diel (during a 24-hour period) variation of water-quality parameters in the main stem of Bear Creek. The irrigation and drainage study involves 25 sites in canals and natural drainageways. One hundred thirty-three samples were collected for analysis, and discharge was determined at the time of collection. The diel study includes six sites on Bear Creek. On August 23-24, four parameters were monitored at all six sites during a 24-hour period.
Oregon↗
Field-trip guide to the geologic highlights of Newberry Volcano, Oregon
Newberry Volcano and its surrounding lavas cover about 3,000 square kilometers (km 2 ) in central Oregon. This massive, shield-shaped, composite volcano is located in the rear of the Cascades Volcanic Arc, ~60 km east of the Cascade Range crest. The volcano overlaps the northwestern corner of the Basin and Range tectonic province, known locally as the High Lava Plains, and is strongly influenced by the east-west extensional environment. Lava compositions range from basalt to rhyolite. Eruptions began about half a million years ago and built a broad composite edifice that has generated more than one caldera collapse event. At the center of the volcano is the 6- by 8-km caldera, created ~75,000 years ago when a major explosive eruption of compositionally zoned tephra led to caldera collapse, leaving the massive shield shape visible today. The volcano hosts Newberry National Volcanic Monument, which encompasses the caldera and much of the northwest rift zone where mafic eruptions occurred about 7,000 years ago. These young lava flows erupted after the volcano was mantled by the informally named Mazama ash, a blanket of volcanic ash generated by the eruption that created Crater Lake about 7,700 years ago. This field trip guide takes the visitor to a variety of easily accessible geologic sites in Newberry National Volcanic Monument, including the youngest and most spectacular lava flows. The selected sites offer an overview of the geologic story of Newberry Volcano and feature a broad range of lava compositions. Newberry ’ s most recent eruption took place about 1,300 years ago in the center of the caldera and produced tephra and lava of rhyolitic composition. A significant mafic eruptive event occurred about 7,000 years ago along the northwest rift zone. This event produced lavas ranging in composition from basalt to andesite, which erupted over a distance of 35 km from south of the caldera to Lava Butte where erupted lava flowed west to temporarily block the Deschutes River. Because of Newberry Volcano ’ s proximity to populated areas, the presence of hot springs within the caldera, and the long and recent history of eruptive activity (including explosive activity), the U.S. Geological Survey installed monitoring equipment on the volcano. A recent geophysical study indicates the presence of magma at 3 to 5 km beneath the caldera. The writing of this guide was prompted by a field trip to Crater Lake and Newberry Volcano organized in conjunction with the August 2017 IAVCEI quadrennial meeting in Portland, Oregon. Both field trip guides are available online. These two volcanoes were grouped in a single field trip because they are two of the few Cascades volcanoes that have generated calderas and significant related tephra deposits.
Oregon↗
Temporal and spatial monitoring of cyanobacterial blooms at Willow Creek Reservoir, North-Central Oregon
The U.S. Geological Survey (USGS) and U.S. Army Corps of Engineers (USACE) investigated the spatial and temporal dynamics of cyanobacterial (blue-green algal) blooms in Willow Creek Reservoir in north-central Oregon in 2015–16. A combination of cameras and water-quality monitoring equipment was used to assess the frequency and duration of blooms and their effects on water quality. A surveillance camera captured color images every 15 minutes during daylight hours of the northwestern corner of Willow Creek Reservoir, where surface blooms tend to accumulate due to the prevailing summer winds. In 2015, a water-quality instrument was deployed in the northwestern corner of the reservoir to continuously measure water temperature, pH, dissolved oxygen, specific conductance, turbidity, total chlorophyll, and the blue-green algae pigment phycocyanin. In 2016, a water-quality instrument was used to collect measurements along transects throughout the reservoir to create spatial maps of water quality. The spatially integrated mapping process was repeated on three different days under varying algal conditions. Also in 2016, a telemetry connection was established allowing resource managers to view the reservoir images in near-real time. Results from 2015 indicate that surface accumulations of cyanobacteria can form and dissipate within minutes in the reservoir, and that blooms can cause substantial changes to water quality. A persistent cyanobacterial bloom in August and September 2015 resulted in pH values of 9.5 standard units, 220 percent oxygen saturation, and pronounced increases in turbidity and total chlorophyll. The stationary water-quality instrument collected data during periods with and without blooms, increasing our understanding of the effects of blooms on water quality and revealing potential restoration benchmarks for the freshwater reservoir. The spatially integrated mapping data showed the variation in water quality across the reservoir that occurs during blooms and baseline conditions and indicated regions of the reservoir to focus restoration efforts. Additional spatial data collection can be timed to collect daily extremes. The camera deployment in 2016 demonstrated that telemetering images from remote sites is possible and provides valuable and timely information. Monitoring with a surveillance camera is inexpensive and supplies data regarding surface-bloom presence or absence. The use of a camera can help target site visits to periods when blooms are observed, which may increase the accuracy of beginning and ending dates for water body closures. Monitoring cyanobacterial blooms in Willow Creek Reservoir with multiple devices provided a more comprehensive dataset than any one monitoring method. The camera images showed when a surface bloom initiated and dissipated while the water-quality instrument revealed the magnitude, or potential severity, of the effects on water quality.
Oregon↗
Geologic Map of the Cascade Head Area, Northwestern Oregon Coast Range (Neskiwin, Nestucca Bay, Hebo, and Dolph 7.5 minute Quadrangles)
The geology of the Cascade Head area bridges the geology in the Tillamook Highlands to the north (Wells and others, 1994; 1995) with that of the Newport Embayment on the south (Snavely and others, 1976 a,b,c). The four 7.5-minute quadrangles (Neskowin, Nestucca Bay, Hebo, and Dolph) which comprise the Cascade Head area include significant stratigraphic, structural, and igneous data that are essential in unraveling the geology of the northern and central part of the Oregon Coast Range and of the adjacent continental shelf Earlier studies (Snavely and Vokes, 1949) were of a broad reconnaissance nature because of limited access in this rugged, densely forested part of the Siuslaw National Forest. Also, numerous thick sills of late middle Eocene diabase and middle Miocene basalt mask the Eocene stratigraphic relationships. Previous mapping was hampered by a lack of precise biostratigraphic data. However, recent advances in biostratigraphy and radiometric age dating and geochemistry have provided the necessary tools to decipher stratigraphic and structural relationships in the Eocene sedimentary and volcanic rock sequences (W.W. Rau, personal communication, 1978 to 1988; Bukry and Snavely, 1988). Many important stratigraphic and igneous relationships are displayed within the Casacde Head area: (1) turbidite sandstone of the middle Eocene Tyee Formation, which is widespread in the central and southern part of the Oregon Coast Range (Snavely and others, 1964), was not deposited in the western part of the Cascade Head, and is of limited extent north of the map area (Wells and others, 1994); (2) the late middle Eocene Yamhill Formation, which crops out along the west and east flank of the Oregon Coast Range, overlaps older strata and overlies an erosional unconformity on the lower Eocene Siletz River Volcanics (Snavely and others, 1990; 1991); (3) thick sills of late middle Eocene diabase (43 Ma) are widespread in the Cascade Head area and also form much of the eastern flank of the Tillamook Highlands (Wells and others, 1994), but are rare south of the map area; (4) Cascade Head is the northernmost eruptive center of late Eocene alkalic basalts--85 km north of the eruptive center of correlative alkalic flows of the Yachats Basalt in the Newport Embayment (Snavely and Vokes, 1949; Snavely and others, 1990; Barnes and Barnes, 1992; Davis and others, 1995); (5) early Oligocene (33 Ma) sills and dikes of nepheline syenite and camptonite present in the Newport Embayment (Snavely and Wagner, 1961) are not found in the Cascade Head area; (6) extensive middle Oligocene (30 Ma) granophyric gabbro sills that are widespread in the central part of the Oregon Coast Range (Snavely and Wagner, 1961; MacLeod, 1969) are not present in the Cascade Head area. The Cascade Head area is the last segment of the Oregon Coast to receive detailed geologic mapping. Increased logging operations in the 1970's and 1980's created numerous new roadcut exposures and access to exposures in stream beds. More importantly, microfossil biostratigraphic control, available since 1970, based upon foraminifer determinations by W.W. Rau and nannofossil determinations by David Bukry provided critical information on stratigraphic succession as well as on depositional environments of the deep water (bathyal) siltstone units present in much of the Cascade Head area. These paleontologic data also permitted correlations with other sedimentary sequences mapped in the Newport Embayment and in the Tillamook Highlands as well as in western Washington. New 7.5-minute topographic maps and aerial photographs which became available in the late 1980's provided detailed topography which can be related to the distribution of thick sills and broad landslide areas, as well as a precise geographic relationship of geologic observations in this densely forested and brush-covered terrain. New geographic information systems (GIS) technology has produced a digitized color map of the Cascade Head area that combines the four 7.5-minute quadrangles that previously were open-filed as separate black and white 7.5-minute quadrangles (Snavely and others, 1990; 1990a; 1991; 1993). The tectonic framework and stratigraphic architecture presented on the map of the Cascade Head area was obtained by classic geologic field methods. This information could have been obtained only through detailed observation and sampling along stream beds, road cuts, and outcrops. Remote sensing techniques were of minor help in unraveling the geology in this poorly exposed and complex terrain, a terrain that characterizes much of the Oregon and Washington Coast Ranges.
Oregon↗
Noble gas isotopes in mineral springs within the Cascadia Forearc, Washington and Oregon
This U.S. Geological Survey report presents laboratory analyses along with field notes for a pilot study to document the relative abundance of noble gases in mineral springs within the Cascadia forearc of Washington and Oregon. Estimates of the depth to the underlying Juan de Fuca oceanic plate beneath the sample sites are derived from the McCrory and others (2012) slab model. Some of these springs have been previously sampled for chemical analyses (Mariner and others, 2006), but none currently have publicly available noble gas data. Helium isotope values as well as the noble gas values and ratios presented below will be used to determine the sources and mixing history of these mineral waters.
Oregon;Washington↗
Geologic assessment of undiscovered hydrocarbon resources of the Western Oregon and Washington Province
The purpose of the U.S. Geological Survey (USGS) National Oil and Gas Assessment is to develop geology-based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States, focusing on the distribution, quantity, and availability of oil and natural gas resources. The USGS has completed an assessment of the undiscovered, technically recoverable oil and gas resources in western Oregon and Washington (USGS Western Oregon and Washington Province 5004). The province includes all of Oregon and Washington north of the Klamath Mountains and west of the crest of the Cascade Range, and extends offshore to the 3-mi limit of State waters on the west and to the International Boundary in the Straits of Juan de Fuca and Canada on the north. It measures about 450 mi north-south and 50 to 160 mi east-west, encompassing more than 51,000 mi2. The assessment of the Western Oregon and Washington Province is geology based and used the total petroleum system (TPS) concept. The geologic elements of a TPS include hydrocarbon source rocks (source rock maturation and hydrocarbon generation and migration), reservoir rocks (quality and distribution), and traps for hydrocarbon accumulation. Using these geologic criteria, two conventional and one unconventional (continuous) total petroleum systems were defined, with one assessment unit (AU) in each TPS: (1) the Cretaceous-Tertiary Composite TPS and the Western Oregon and Washington Conventional Gas AU, (2) the Tertiary Marine TPS and the Tertiary-Marine Gas AU, and (3) the Tertiary Coalbed Gas TPS and the Eocene Coalbed Gas AU, in which a cell-based methodology was used to estimate coalbed-gas resources.
Data Series↗
Preliminary geologic map of the Mount Hood 30- by 60-minute Quadrangle, Northern Cascade Range, Oregon
This map shows the geology of the central and eastern parts of the Cascade Range in northern Oregon. The Quaternary andesitic stratovolcano of Mount Hood dominates the northwest quarter of the quadrangle, but nearly the entire area is underlain by arc-related volcanic and volcaniclastic rocks of the Cascade Range. Most stratigraphic units were emplaced since middle Miocene time, and all are Oligocene or younger. Despite the proximity of the map area to the Portland metropolitan area, large parts remained virtually unstudied or known only from limited reconnaissance until the late 1970s. A notable exception is the area surrounding Mount Hood, where mapping and chemical analyses by Wise (1969) provided a framework for geologic interpretation. Mapping since 1975 was conducted first to understand the stratigraphy and structure of the Columbia River Basalt Group (Anderson, 1978; Vogt, 1981; J.L. Anderson, in Swanson and others, 1981; Vandiver-Powell, 1978; Burck, 1986) and later to examine the geothermal potential of Mount Hood (Priest and others, 1982). Additional mapping was completed in 1985 for a geologic map of the Cascade Range in Oregon (Sherrod and Smith, 1989). From 1987 to 1990, detailed mapping was conducted in three 15-minute quadrangles on a limited basis (D.R. Sherrod, unpublished mapping) (see fig. 1 for index to mapping). An ongoing volcanic hazards study of Mount Hood by the U.S. Geological Survey (Scott and others, 1994) has provided the catalyst for completing the geologic map of the Mount Hood 30-minute by 60-minute quadrangle. As of June 1994, only two broad areas still remain largely unmapped. One of these areas, labeled 'unmapped' on the geologic map, lies in the Salmon River valley south of Zigzag along the west margin of the quadrangle. Although strata of the Columbia River Basalt Group in the Salmon River valley were mapped in detail by Burck (1986), the overlying middle and upper(?) Miocene lava flows, volcaniclastic strata, and intrusions have never been studied. The other poorly known area, the Mutton Mountains in the southeastern part of the map area, consists of Oligocene and lower Miocene volcanic and volcaniclastic rocks. Overlying lava flows of the Columbia River Basalt Group were mapped in some detail by Anderson (in Swanson and others, 1981).
Open-File Report↗
Preliminary geologic and tectonic maps of Oregon east of the 121st meridian
Explore the source record for details and available documents.
Miscellaneous Field Studies Map↗
Appraisal of waterpower and reservoir sites, Nestucca River basin, Oregon, with a section on geology of selected sites
Explore the source record for details and available documents.
Open-File Report↗
Data report for the 1983 U.S. Geological Survey east-central Oregon seismic refraction experiment
Explore the source record for details and available documents.
Open-File Report↗