Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Surveying Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2004

The U.S. Geological Survey Library

Established in 1879, to build and organize a collection of scientific materials in the earth sciences, the U.S. Geological Survey (USGS) Library is the largest earth sciences collection in the world. The USGS Library System is managed by the Geographic Information Office (GIO), Information Policy and Services Office, and includes four libraries in Reston, Va., Denver, Colo., Menlo Park, Calif., and Flagstaff, Ariz. The library holds over one million books and journals, 700,000 maps, 370,000 microforms, 270,000 pamphlets, and 250,000 photographs. In addition to the four libraries managed by the GIO, the USGS has smaller libraries in other locations with collections closely related to the specialized research of their local USGS scientists. The USGS Library System supports the research of USGS scientists by providing access to worldwide information resources. While continuing to build and maintain the large collections of maps, books, and periodicals, the USGS Library system is evolving from a traditional library to a more "virtual library." USGS employees, wherever they are located, have desktop access to an increasing wealth of electronic resources 24 hours a day, 7 days a week.

Fact Sheet↗
USGS2012

Comparison of soil thickness in a zero-order basin in the Oregon Coast Range using a soil probe and electrical resistivity tomography

Accurate estimation of the soil thickness distribution in steepland drainage basins is essential for understanding ecosystem and subsurface response to infiltration. One important aspect of this characterization is assessing the heavy and antecedent rainfall conditions that lead to shallow landsliding. In this paper, we investigate the direct current (DC) resistivity method as a tool for quickly estimating soil thickness over a steep (33–40°) zero-order basin in the Oregon Coast Range, a landslide prone region. Point measurements throughout the basin showed bedrock depths between 0.55 and 3.2 m. Resistivity of soil and bedrock samples collected from the site was measured for degrees of saturation between 40 and 92%. Resistivity of the soil was typically higher than that of the bedrock for degrees of saturation lower than 70%. Results from the laboratory measurements and point-depth measurements were used in a numerical model to evaluate the resistivity contrast at the soil-bedrock interface. A decreasing-with-depth resistivity contrast was apparent at the interface in the modeling results. At the field site, three transects were surveyed where coincident ground truth measurements of bedrock depth were available, to test the accuracy of the method. The same decreasing-with-depth resistivity trend that was apparent in the model was also present in the survey data. The resistivity contour of between 1,000 and 2,000 Ωm that marked the top of the contrast was our interpreted bedrock depth in the survey data. Kriged depth-to-bedrock maps were created from both the field-measured ground truth obtained with a soil probe and interpreted depths from the resistivity tomography, and these were compared for accuracy graphically. Depths were interpolated as far as 16.5 m laterally from the resistivity survey lines with root mean squared error (RMSE) = 27 cm between the measured and interpreted depth at those locations. Using several transects and analysis of the subsurface material properties, the direct current (DC) resistivity method is shown to be able to delineate bedrock depth trends within the drainage basin.

Oregon↗
USGS2016

Seasonal electrical resistivity surveys of a coastal bluff, Barter Island, North Slope Alaska

Select coastal regions of the North Slope of Alaska are experiencing high erosion rates that can be attributed in part to recent warming trends and associated increased storm intensity and frequency. The upper sediment column of the coastal North Slope of Alaska can be described as continuous permafrost underlying a thin (typically less than 1–2 m) active layer that responds variably to seasonal thaw cycles. Assessing the temporal and spatial variability of the active layer and underlying permafrost is essential to better constrain how heightened erosion may impact material fluxes to the atmosphere and the coastal ocean, and how enhanced thaw cycles may impact the stability of the coastal bluffs. In this study, multi-channel electrical resistivity tomography (ERT) was used to image shallow subsurface features of a coastal bluff west of Kaktovik, on Barter Island, northeast Alaska. A comparison of a suite of paired resistivity surveys conducted in early and late summer 2014 provided detailed information on how the active layer and permafrost are impacted during the short Arctic summer. Such results are useful in the development of coastal resilience models that tie together fluvial, terrestrial, climatic, geologic, and oceanographic forcings on shoreline stability.

Alaska↗
USGS1997

U.S. Geological Survey Studies of Energy Resources in Sub-Saharan Africa

The U.S. Government and the American public need access to information on energy resources in sub-Saharan Africa. Sub-Saharan Africa (mostly Nigeria) produces 5 percent of the world's oil, while supplying the United States with 15 percent of our imports (Energy Information Administration). In the next 10 years, sub-Saharan oil and gas will become increasingly more important to the export market. New discoveries in offshore provinces of West Africa ensure a bright future for the region. Projections indicate that increased oil production in sub-Saharan Africa will far outpace the growth of intraregional consumption, providing greater quantities of oil for export (Forman, 1996). Also, West Africa, although a marginal supplier of liquefied natural gas (LNG) today, will become an important LNG source to the international market by the year 2000 (Oil & Gas Journal, 1996). The United States needs up-to-date information about petroleum resources and the energy balance within the region to predict the future role of sub-Saharan Africa as a major oil and gas exporter. The data required to generate the needed information are often disseminated in archives of oil companies and African geologic surveys, or in obscure publications. For these reasons, the U.S. Geological Survey is collecting data on sub-Saharan energy and constructing a regional energy bibliography. The team of geoscientists will assure that this information is available quickly and from a scientifically based, objective view point.

Fact Sheet↗
USGS1999

Oil, gas field growth projections: Wishful thinking or reality?

The observed `field growth' for the period from 1992 through 1996 with the US Geological Survey's (USGS) predicted field growth for the same period are compared. Known field recovery of field size is defined as the sum of past cumulative field production and the field's proved reserves. Proved reserves are estimated quantities of hydrocarbons which geologic and engineering data demonstrate with reasonable certainty to recoverable from known fields under existing economic and operating conditions. Proved reserve estimates calculated with this definition are typically conservative. The modeling approach used by the USGS to characterize `field growth phenomena' is statistical rather that geologic in nature.

Oil & Gas Journal↗
USGS2004

Large scale clear-water local pier scour experiments

Local clear-water scour tests were performed with three different diameter circular piles (0.114, 0.305, and 0.914 m "> 0.914 m ), three different uniform cohesionless sediment diameters (0.22, 0.80, and 2.90 mm "> 2.90 mm ) and a range of water depths and flow velocities. The tests were performed in the 6.1 m "> 6.1 m wide, 6.4 m "> 6.4 m deep, and 38.4 m "> 38.4 m long flume at the United States Geological Survey Conte Research Center in Turners Falls, Mass. These tests extend local scour data obtained in controlled experiments to prototype size piles and ratios of pile diameter to sediment diameter to 4,155. Supply water for this flow through flume was supplied by a hydroelectric power plant reservoir and the concentration of suspended fine sediment (wash load) could not be controlled. Equilibrium scour depths were found to depend on the wash load concentration.

Journal of Hydraulic Engineering↗
USGS2020

Effectiveness of submerged vanes for stabilizing streamside bluffs

The effectiveness of submerged vanes for stabilizing streamside bluffs varied over a 10-year monitoring period in a tributary to Lake Superior, United States. Submerged vanes are a river training device used to divert river flows away from eroding banks along meander bends and ultimately hold constant or reverse the direction of lateral migration. At the study site, the relatively steep slope, large substrate size, and flashy flow regime pushed the upper end of the design limitations of submerged vanes. Changes in channel location and morphology due to the vanes were monitored using repeat channel cross-section surveys along a 110-m reach. The vanes experienced 15 floods over the monitoring period. The two most damaging floods happened in the summer and fall of 2005 with annual exceedance probabilities of 7% and 6% respectively. A new data analysis method for rivers, using centroids of cross sections, was useful to track channel migration rapidly and objectively and, along with calculations of changes in bankfull channel size, provide metrics to describe channel change.

Journal of Hydraulic Engineering↗
USGS2017

Daily reservoir sedimentation model: Case study from the Fena Valley Reservoir, Guam

A model to compute reservoir sedimentation rates at daily timescales is presented. The model uses streamflow and sediment load data from nearby stream gauges to obtain an initial estimate of sediment yield for the reservoir’s watershed; it is then calibrated to the total deposition calculated from repeat bathymetric surveys. Long-term changes to reservoir trapping efficiency are also taken into account. The model was applied to the Fena Valley Reservoir, a water supply reservoir on the island of Guam. This reservoir became operational in 1951 and was recently surveyed in 2014. The model results show that the highest rate of deposition occurred during two typhoons (Typhoon Alice in 1953 and Typhoon Tingting in 2004); each storm decreased reservoir capacity by approximately 2–3% in only a few days. The presented model can be used to evaluate the impact of an extreme event, or it can be coupled with a watershed runoff model to evaluate potential impacts to storage capacity as a result of climate change or other hydrologic modifications.

Journal of Hydraulic Engineering↗
USGS1997

Predicting travel time and dispersion in rivers and streams

The possibility of a contaminant being accidentally or intentionally spilled in a river is a constant concern to those using the water. Methods are developed to estimate: (1) the velocity of a contaminant in a river; (2) the rate of attenuation of the peak concentration of a conservative contaminant; and (3) the time required for a contaminant plume to pass a point. The methods are based on data collected by the U.S. Geological Survey in almost a hundred different rivers representing a wide range of sizes, slopes, and geomorphic types. Although the accuracy of the predictions can be greatly increased by performing time-of-travel studies, the emphasis of this paper is on providing methods for making estimates where few data are available. It is shown that the unit-peak concentration is well correlated with travel time and that the travel time of the leading edge averages 89% of the travel time of the peak concentration.

Journal of Hydraulic Engineering↗
USGS2005

Long-term behavior of water content and density in an earthen liner

An extensively instrumented compacted earthen liner was constructed at the Illinois State Geological Survey facility in Champaign, III. in 1987. A pond of water 0.31 m deep was maintained on top of the 7.3 m ?? 14.6 m ?? 0.9 m thick liner for 14 years. One of the goals of the project was to evaluate the long-term performance of a compacted earthen liner by monitoring the long-term changes in water content and density. The water content of the earthen liner showed no trend with depth or time. The liner density remained essentially constant from construction through excavation in 2002. The liner did not become fully saturated. Upon excavation of the liner, the degree of saturation was 80.0??6.3% after 14 years of ponding under a hydraulic head of 0.31 m. The results imply that properly designed and constructed earthen liners may reduce the possibility of pollutants leaching from municipal solid waste containment facilities by remaining partially saturated for years and maintaining the placement density. Journal of Geotechnical and Geoenvironmental Engineering ?? ASCE.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS1976

Use of thermal-infrared imagery in ground-water investigations, northwestern Montana

Thermal-infrared imagery was used to locate ground-water inflow along a 50-mile (80-kilometre) reach of the Kootenai River and Lake Koocanusa and a 55-mi (88-km) reach of the Clark Fork of the Columbia River in northwestern Montana and northeastern Idaho. The imagery confirmed that measured streamflow gains below Noxon Rapids Dam, ranging from 1,000 to 2,500 cubic feet per second (28 to 71 cubic metres per second), resulted from inflow of ground water, which was about 2.5° Celsius warmer than surface water. The thermal scanner (8.5-11 micrometres) used in May 1972 and March 1973 was mounted in a twin-engined aircraft. On the March 1973 flight, the data were recorded in an analog format on magnetic tape in flight, later were converted to digital format, and then were computer processed using an assignment of patterns to indicate differences in water temperature. Thus, subtle temperature differences are much easier to identify than they are oh conventional film-negative displays. The output data from the image-processing program can be converted to temperature maps having an isotherm spacing of 0.5°C.

Montana↗
USGS2005

Streamflow properties from time series of surface velocity and stage

Time series of surface velocity and stage have been collected simultaneously. Surface velocity was measured using an array of newly developed continuous-wave microwave sensors. Stage was obtained from the standard U.S. Geological Survey (USGS) measurements. The depth of the river was measured several times during our experiments using sounding weights. The data clearly showed that the point of zero flow was not the bottom at the measurement site, indicating that a downstream control exists. Fathometer measurements confirmed this finding. A model of the surface velocity expected at a site having a downstream control was developed. The model showed that the standard form for the friction velocity does not apply to sites where a downstream control exists. This model fit our measured surface velocity versus stage plots very well with reasonable values of the parameters. Discharges computed using the surface velocities and measured depths matched the USGS rating curve for the site. Values of depth-weighted mean velocities derived from our data did not agree with those expected from Manning's equation due to the downstream control. These results suggest that if real-time surface velocities were available at a gauging station, unstable stream beds could be monitored. Journal of Hydraulic Engineering ?? ASCE.

Journal of Hydraulic Engineering↗
USGS2007

Evaluation of an experimental LiDAR for surveying a shallow, braided, sand-bedded river

Reaches of a shallow (<1.0m), braided, sand-bedded river were surveyed in 2002 and 2005 with the National Aeronautics and Space Administration's Experimental Advanced Airborne Research LiDAR (EAARL) and concurrently with conventional survey-grade, real-time kinematic, global positioning system technology. The laser pulses transmitted by the EAARL instrument and the return backscatter waveforms from exposed sand and submerged sand targets in the river were completely digitized and stored for postflight processing. The vertical mapping accuracy of the EAARL was evaluated by comparing the ellipsoidal heights computed from ranging measurements made using an EAARL terrestrial algorithm to nearby (<0.5m apart) ground-truth ellipsoidal heights. After correcting for apparent systematic bias in the surveys, the root mean square error of these heights with the terrestrial algorithm in the 2002 survey was 0.11m for the 26 measurements taken on exposed sand and 0.18m for the 59 measurements taken on submerged sand. In the 2005 survey, the root mean square error was 0.18m for 92 measurements taken on exposed sand and 0.24m for 434 measurements on submerged sand. In submerged areas the waveforms were complicated by reflections from the surface, water column entrained turbidity, and potentially the riverbed. When applied to these waveforms, especially in depths greater than 0.4m, the terrestrial algorithm calculated the range above the riverbed. A bathymetric algorithm has been developed to approximate the position of the riverbed in these convolved waveforms and preliminary results are encouraging. ?? 2007 ASCE.

Journal of Hydraulic Engineering↗
USGS2021

Performance of bedload sediment transport formulas applied to the Lower Minnesota River

Despite limitations in reproducing complex bedload sediment transport processes in rivers, formulas have been preferred over collection and analysis of field data due to the high cost and time-consuming nature of bedload discharge measurements. However, the performance of such formulas depends on the hydraulic and sedimentological conditions they attempt to describe. The availability of field measurements provides a unique opportunity to test bedload transport formulas to better guide formula selection. Hydraulic parameters and bedload discharge data from the Lower Minnesota River and two of its tributaries were used to evaluate nine bedload transport formulas using three different indices. The bedload data for the different sites were collected by the United States Geological Survey (USGS) from 2011 through 2014, with bed material varying from very coarse to medium sand. The formulas calculated higher bedload rates than were measured due to a combination of site-specific physical characteristics, including the presence of bed forms (dunes), and sampling uncertainties. Because of the lack of reproducibility of the tested formulas, five power functions, based on the relation between the specific unit power (independent hydraulic variable) and the USGS measured data (dependent variable), were derived as provisional equations to estimate the bedload discharge on the Lower Minnesota River and tributaries.

Minnesota↗
USGS2007

Use of the Delphi method in resolving complex water resources issues

The tri-state river basins, shared by Georgia, Alabama, and Florida, are being modeled by the U.S. Fish and Wildlife Service and the U.S. Army Corps of Engineers to help facilitate agreement in an acrimonious water dispute among these different state governments. Modeling of such basin reservoir operations requires parallel understanding of several river system components: hydropower production, flood control, municipal and industrial water use, navigation, and reservoir fisheries requirements. The Delphi method, using repetitive surveying of experts, was applied to determine fisheries' water and lake-level requirements on 25 reservoirs in these interstate basins. The Delphi technique allowed the needs and requirements of fish populations to be brought into the modeling effort on equal footing with other water supply and demand components. When the subject matter is concisely defined and limited, this technique can rapidly assess expert opinion on any natural resource issue, and even move expert opinion toward greater agreement.

Journal of the American Water Resources Associatio↗
USGS2014

Methane hydrates in nature - Current knowledge and challenges

Recognizing the importance of methane hydrate research and the need for a coordinated effort, the United States Congress enacted the Methane Hydrate Research and Development Act of 2000. At the same time, the Ministry of International Trade and Industry in Japan launched a research program to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. India, China, the Republic of Korea, and other nations also have established large methane hydrate research and development programs. Government-funded scientific research drilling expeditions and production test studies have provided a wealth of information on the occurrence of methane hydrates in nature. Numerous studies have shown that the amount of gas stored as methane hydrates in the world may exceed the volume of known organic carbon sources. However, methane hydrates represent both a scientific and technical challenge, and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of methane hydrates in nature, (2) assessing the volume of natural gas stored within various methane hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural methane hydrates, (5) analyzing the methane hydrate role as a geohazard, (6) establishing the means to detect and characterize methane hydrate accumulations using geologic and geophysical data, and (7) establishing the thermodynamic phase equilibrium properties of methane hydrates as a function of temperature, pressure, and gas composition. The U.S. Department of Energy (DOE) and the Consortium for Ocean Leadership (COL) combined their efforts in 2012 to assess the contributions that scientific drilling has made and could continue to make to advance our understanding of methane hydrates in nature. COL assembled a Methane Hydrate Project Science Team with members from academia, industry, and government. This Science Team worked with COL and DOE to develop and host the Methane Hydrate Community Workshop, which surveyed a substantial cross section of the methane hydrate research community for input on the most important research developments in our understanding of methane hydrates in nature and their potential role as an energy resource, a geohazard, and/or as an agent of global climate change. Our understanding of how methane hydrates occur in nature is still growing and evolving, and it is known with certainty that field, laboratory, and modeling studies have contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information needed to advance our understanding of methane hydrates.

Journal of Chemical and Engineering Data↗
USGS1997

Measurement of flow under ice covers in North America

A substantial proportion of natural streams in the United States and Canada are affected by ice cover during the winter. To substantiate the currently used procedures for measuring streamflow during the winter, the U.S. Geological Survey (USGS) and Water Survey of Canada (WSC) began independent, coordinated programs for research and development related to the measurement of streamflow under an ice cover. Detailed measurements of vertical velocity profiles under ice covers in field settings were collected by each agency in accordance with standardized guidelines. The data were then compiled into a joint database. This paper presents a description of the two measurement programs, describes the structure and format of the joint database, and provides preliminary summaries of the data. Ongoing research efforts by the USGS and WSC are described briefly to give examples of the use of the joint database.

Journal of Hydraulic Engineering↗
USGS1982

Refining Landsat classification results using digital terrain data

Scientists at the U.S. Geological Survey's Earth Resources Observation systems (EROS) Data Center have recently completed two land-cover mapping projects in which digital terrain data were used to refine Landsat classification results. Digital ter rain data were incorporated into the Landsat classification process using two different procedures that required developing decision criteria either subjectively or quantitatively. The subjective procedure was used in a vegetation mapping project in Arizona, and the quantitative procedure was used in a forest-fuels mapping project in Montana. By incorporating digital terrain data into the Landsat classification process, more spatially accurate landcover maps were produced for both projects.

Journal of Applied Photographic Engineering↗