Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Structural Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS1973

A photogeologic method for determining the direction of horizontal dilation from patterns of en echelon fracturing

The direction of horizontal dilation in areas characterized by tensional tectonics can be determined from a statistical study of en echelon patterns of fracturing observed on aerial photographs. Relative, to a north-south dilation, nearly all directions of zones of dextral (right-lateral) en echelon fractures lie in the northeast quadrant, while those of sinistral (left-lateral) en echelon fractures concentrate in the northwest quadrant. Statistically, directions of the two types of zones define unimodal frequency curves that intersect at about 90 degrees to, and thus define the direction of, applied dilation. The method has been field tested twice and is believed to be suitable for any area characterized by (1) generally unidirectional horizontal strain and (2) an adequate population of geologically contemporaneous fissures, including roughly equal development of sinistral and dextral en echelon arrays. Where exposures and aerial photograph coverage are adequate, the direction can be determined quickly to within about 10 degrees accuracy without fieldwork. The method should be useful for preliminary structural studies, especially in inaccessible areas.

Journal of Research of the U.S. Geological Survey↗
USGS1978

Morphology of chasma walls, Mars

The landforms developed on the walls of the Valles Marineris system of chasmas are of three major types, which are locally transitional. The most common type is composed of steep spurs and gullies. The dominant process in the formation or modification of this type appears to be the downslope movement of. material under the influence of gravity, resulting in the accumulation of extensive talus deposits. The type is morphologically similar to high, steep terrestrial scarps in desert or alpine environments. The second morphologic type consists of walls dissected by tributary canyons with characteristic V-shaped cross profiles and blunt canyon heads that locally contain lobate deposits. The tributary canyons may be relict features of the time, when the existence of running water was possible on the surface of Mars. The third morphologic type consists of landslide scars forming broad curved or straight recessed sections of chasma wall. This type is accompanied by landslide deposits that form hummocky floors at the base of the recessed sections. The landslides developed at the expense of other wall morphologies. Chains of rimless depressions and craters that parallel the main structural trends of the chasmas are best interpreted as collapse holes. The origin of the chasmas on Mars is conjectural and may have been structural (grabens), but, on the basis of morphologic studies of their walls, it is suggested that most of the present wall configuration is the result of erosional scarp retreat, where erosion follows preestablished structural planes of weakness.

Journal of Research of the U.S. Geological Survey↗
USGS1998

Stratigraphy and structure of coalbed methane reservoirs in the United States: an overview

Stratigraphy and geologic structure determine the shape, continuity and permeability of coal and are therefore critical considerations for designing exploration and production strategies for coalbed methane. Coal in the United states is dominantly of Pennsylvanian, Cretaceous and Tertiary age, and to date, more than 90% of the coalbed methane produced is from Pennsylvanian and cretaceous strata of the Black Warrior and San Juan Basins. Investigations of these basins establish that sequence stratigraphy is a promising approach for regional characterization of coalbed methane reservoirs. Local stratigraphic variation within these strata is the product of sedimentologic and tectonic processes and is a consideration for selecting completion zones. Coalbed methane production in the United States is mainly from foreland and intermontane basins containing diverse compression and extensional structures. Balanced structural models can be used to construct and validate cross sections as well as to quantify layer-parallel strain and predict the distribution of fractures. Folds and faults influence gas and water production in diverse ways. However, interwell heterogeneity related to fractures and shear structures makes the performance of individual wells difficult to predict.Stratigraphy and geologic structure determine the shape, continuity and permeability of coal and are therefore critical considerations for designing exploration and production strategies for coalbed methane. Coal in the United States is dominantly of Pennsylvanian, Cretaceous and Tertiary age, and to date, more than 90% of the coalbed methane produced is from Pennsylvanian and Cretaceous strata of the Black Warrior and San Juan Basins. Investigations of these basins establish that sequence stratigraphy is a promising approach for regional characterization of coalbed methane reservoirs. Local stratigraphic variation within these strata is the product of sedimentologic and tectonic processes and is a consideration for selecting completion zones. Coalbed methane production in the United States is mainly from foreland and intermontane basins containing diverse compressional and extensional structures. Balanced structural models can be used to construct and validate cross sections as well as to quantify layer-parallel strain and predict the distribution of fractures. Folds and faults influence gas and water production in diverse ways. However, interwell heterogeneity related to fractures and shear structures makes the performance of individual wells difficult to predict.

International Journal of Coal Geology↗
USGS1990

Organic geochemical studies of the transformation of gymnospermous xylem during peatification and coalification to subbituminous coal

Organic geochemical investigations of peatified and coalified xylem from gymnosperms have provided useful information on the organic transformational processes collectively known as coalification. The combined use of solid-state 13 C nuclear magnetic resonance (NMR) and pyrolysis/gas chromatography/mass spectrometry (py/gc/ms) has allowed us to examine the organic composition of peatified and coalified xylem on both a bulk (average) compositional basis and on a detailed molecular basis. We conclude from our studies that coalification of gymnospermous xylem involves the following processes1. (1) early selective removal of cellulosic materials so that lignin, a primary constituent of xylem, is transformed to macromolecular aromatic components in coal;2. (2) modification of gymnospermous lignin by demethylation to form catechol-like structures, and by condensation reactions to induce a high level of cross-linking at an early stage of coalification; and (3) dehydroxylation during increasing coalification to subbituminous coal, the resultant xylem becomes more phenolic in character as the catechol-like structures decrease.

International Journal of Coal Geology↗
USGS1974

Time of travel and dye dosage for an irrigation canal system near Duchesne, Utah

Fracturing and subsidence of the land surface in the Milford area oil Utah have resulted from the decline of water levels due to pumping in unconsolidated deposits of Quaternary age. To the writers’ knowledge, these are the first such effects of ground-water withdrawal reported in Utah. The fracturing is in an area about 1 mile (1.6 km) wide and 11 miles (18 km) long near Milford, in an unsaturated clay-silt zone (locally peaty at top) in the upper part of the principal ground-water reservoir. The fractures range in length from several feet to more than 100 feet (30 m), and their maximum measured depth in 1972 was 4 feet (1.2 m). Land subsidence in the Milford area is demonstrated by three lines of evidence: (1) collapse structures, (2) well casings that protrude higher above the land surface than when first placed in the borehole, and (3) lower elevations at National Ocean Survey (formerly U.S. Coast and Geodetic Survey) bench marks in 1970 than in 1908. This evidence shows that land subsidence in the Milford area is of two types, each having a different origin. One type has a near-surface origin in the clay-silt zone in the upper part of the principal groundwater reservoir, and the other is in the lower artesian aquifers of the principal ground-water reservoir. The amount of observed subsidence ranges from 0.05 foot (0.015 m) at the bench mark at Read to about 6 feet (1.8 m) at collapse structures in the Hay Springs area.

Utah↗
USGS2005

Geology of five small Australian impact craters

Here we present detailed geological maps and cross-sections of Liverpool, Wolfe Creek, Boxhole, Veevers and Dalgaranga craters. Liverpool crater and Wolfe Creek Meteorite Crater are classic bowlshaped, Barringer-type craters, Liverpool was likely formed during the Neoproterozoic and was filled and covered with sediments soon thereafter. In the Cenozoic, this cover was exhumed exposing the crater's brecciated wall rocks. Wolfe Creek Meteorite Crater displays many striking features, including well-bedded ejecta units, crater-floor faults and sinkholes, a ringed aeromagnetic anomaly, rim-skirting dunes, and numerous iron-rich shale balls. Boxhole Meteorite Crater, Veevers Meteorite Crater and Dalgaranga crater are smaller, Odessa-type craters without fully developed, steep, overturned rims. Boxhole and Dalgaranga craters are developed in highly follated Precambrian basement rocks with a veneer of Holocene colluvium. The pre-existing structure at these two sites complicates structural analyses of the craters, and may have influenced target deformation during impact. Veevers Meteorite Crater is formed in Cenozoic laterites, and is one of the best-preserved impact craters on Earth. The craters discussed herein were formed in different target materials, ranging from crystalline rocks to loosely consolidated sediments, containing evidence that the impactors struck at an array of angles and velocities. This facilitates a comparative study of the influence of these factors on the structural and topographic form of small impact craters. ?? Geological Society of Australia.

Boxhole crater, Dalgaranga crater, Liverpool crate↗
USGS2022

Bulk and intramolecular carbon isotopic compositions of hydrocarbon gases from laboratory pyrolysis of oil shale of the Green River Formation: Implications for isotope structures of kerogens

Evaluation of intramolecular isotope distributions within organic compounds can provide important insights into gas formation processes and structural properties of gas-generating precursors, such as kerogen, bitumen, and oil, in natural reservoirs. Until recently, little has been known about the intramolecular isotope distributions within kerogens. In this study, we conducted systematic pyrolysis experiments of gas generation from a lacustrine oil shale of the Eocene Green River Formation under hydrous and anhydrous conditions (equivalent maturity or Easy %R o : 0.76 to 3.27 at 310 to 480 °C for 3 to 50 days), measuring gas yields and compositions, as well as bulk and position-specific (PS) carbon isotope compositions. Gas generation processes were investigated in combination with kinetic Monte Carlo (kMC) simulations on a model Type I kerogen based on the chemical structures of oil shale of the Green River Formation. The comparison of our experimental results with kMC modelling indicates a series of β-scission, radical isomerization, and recombination reactions better represent the bulk isotope compositions of propane in the pyrolysis of the oil shale of the Green River Formation, but the ΔC c-t (= δ 13 C cen – δ 13 C ter ) values of propane at Easy %R o > 1.5 can be better simulated by a simple combination of propyl groups with H radicals. Combining our previous works on marine shale of the Woodford Formation and Springfield Coal Member of the Carbondale Formation, PS carbon isotopes of propane indicate that in the lacustrine shales of the Green River Formation and the marine Woodford Shale, propane is sourced from C C bond cleavage, while C O bond cracking generates propane from coal at the initial kerogen cracking stage. At high maturity, the differences of late-stage propane production among the source rocks lead to the different bulk and PS C kinetic isotope effects of propane. Our findings suggest that the δ 13 C at the terminal position of propane precursors is likely up to 3.6‰ higher than at the central position in the Green River kerogen, while they are similar in the marine shale of Woodford Formation. In addition, the δ 13 C at the central position of propyl groups attached to heteroatom compounds is relatively more positive in the Springfield Coal Member of the Carbondale Formation than in Green River kerogen. A comparison of intramolecular C isotopes of propyl groups in the kerogens with their bulk δ 13 C, based on the PS δ 13 C of early-generated propane, contributes to our understanding of heterogeneities of isotopic structures of sedimentary organic matter.

International Journal of Coal Geology↗
USGS1989

The geology, botany and chemistry of selected peat-forming environments from temperate and tropical latitudes

Peat has been studied in several geologic settings: (1) glaciated terrain in cold temperate Maine and Minnesota, U.S.A.; (2) an island in the Atlantic Ocean off the coast of Maine, where sea level is rising; (3) the warm temperate U.S. Atlantic and Gulf Coastal Plains, where sea level has changed often; and (4) the tropical coast of Sarawak, Malaysia, and the tropical delta of the Batang Hari River, Sumatra, Indonesia. Most of these deposits are domed (ombrotrophic or partly ombrotrophic) bogs in which peat accumulation continued above the surface of the surrounding soil. However, the bogs of the U.S. Atlantic and Gulf Coastal Plains are comparatively not as domed, and many have almost level surfaces. In some bogs, aquatic or semi-aquatic plant materials accumulated, replaced water in the depressions, and formed a surface on which marsh or swamp vegetation could subsequently live, die, and accumulate. In others, the plant materials accumulated initially on level silt or sand surfaces supporting marshes or swamps. As the peat dome formed, plants growing on it changed from luxuriant ones near the base of the dome, where nutrients were brought into the bog by surface and ground water, to stunted ones at the top of the dome, where the raised bogs are fed by nutrient-poor precipitation. The physical and chemical changes that take place in the sequence of environments from the pond stage of deposit development, through the grassy marsh stage, through the forested swamp stage, and finally through the heath dome stage can be measured in terms of acidity and ash, volatile matter, carbon, hydrogen, nitrogen, sulfur and oxygen contents, as well as in the kind and distribution of trace elements. The organic and inorganic contents of the deposits relate to geomorphology, and geomorphology relates to their settings. As models of coal formation, some domed peat deposits may help in solving problems of distribution and character of ancient coal beds. But clearly not all peat deposits are precursors of coal. Most Holocene peat deposits are subject to destruction by erosion, fire and decomposition through microbial and chemical oxidation before burial. The best environments for coal precursors have biomass accumulation, a continuously rising water table within the mass, and minimum influx of clay and silt until preservation by burial. The most suitable settings for future economic coal deposits are domed bogs that accumulate thick, widespread peat having low ash and low sulfur contents. The ombrotrophic peat deposits of tropical Sarawak and Sumatra are thick and extensive, contain low-ash and low-sulfur peat, and have high heating values. They are considered to be the best tropical coal analogs because of their extent and chances of preservation; the base of the peat is below adjacent river levels, and chemical and structural conditions are favorable for accumulation.

International Journal of Coal Geology↗
USGS1978

Wood River mining district, Idaho - intrusion-related lead-silver deposits derived from country rock source

Lead-silver deposits in the Wood River mining district occur in shear zones in hornfelsed argillite of the Devonian Milligen Formation near granitic plutons and under the Wood River thrust fault. The principal ore minerals are argentiferous galena and sphalerite; siderite is the principal gangue. The δ 34 S values of the sulfide minerals range from +2.2 to +15.0 permil, indicating that the sulfur had a shallow crustal source. Δ 34 S values between sphalerite and galena range from +2.3 to +3.4 permil, corresponding to sulfur isotope temperatures between 280° and 182 °C. Hydrothermal barite has a δ 34 S of +13.2 permil. Lead isotope ratios are radiogenic, also pointing to a shallow crustal source. Quartz gangue has δ 18 O of +16.4 permil and a calculated δ 18 O H20 at 270°C of +8.4 permil. This value is reasonable for a hydrothermal fluid that had reached equilibrium with the argillite country rock. The siderite gangue has δ 18 O and δ 13 C values of +14.0 and -5.5 permil, respectively. Fluid inclusions have homogenization temperatures of 244°-307°C and average 270°C. Freezing-stage measurements ranged from -1.85 to -2.8°C, suggesting salinities of 3.2 to 4.8 weight percent. The δD values of inclusion fluid in ore and gangue minerals are -110 to -120 permil. The geology, isotope, and fluid-inclusion data are consistent with a model of hydrothermal systems of meteoric water in faulted and shattered Paleozoic rocks near plutonic masses. This environment permitted deep circulation of the hydrothermal fluids, which dissolved the metals and sulfur from the Paleozoic host rocks and deposited ore in favorable beds or structures under the regional Wood River thrust fault.

Idaho↗
USGS2022

Annotated bibliography of scientific research on pygmy rabbits published from 1990 to 2020

Integrating recent scientific knowledge into management decisions supports effective natural resource management and can lead to better resource outcomes. However, finding and accessing scientific knowledge can be time consuming and costly. To assist in this process, the U.S. Geological Survey (USGS) is creating a series of annotated bibliographies on topics of management concern for western lands. Previously published reports introduced a methodology for preparing annotated bibliographies to facilitate the integration of recent, peer-reviewed science into resource management decisions. Therefore, relevant text from those efforts is reproduced here to frame the presentation. Sagebrush ecosystems throughout North America face management challenges including habitat loss and fragmentation. Brachylagus idahoensis (pygmy rabbits) are a sagebrush-obligate species that has experienced population declines and range contraction in recent decades. A disjunct population of pygmy rabbits in the Columbia Basin in Washington was listed as federally endangered in 2003. Due to their specialized habitat requirements and low dispersal ability, pygmy rabbits are a high priority for managers throughout their range. We compiled and summarized peer-reviewed journal articles, data products, and formal technical reports (such as U.S. Forest Service General Technical Reports and U.S. Geological Survey Open-File Reports) on pygmy rabbits published between January 1, 1990 and December 31, 2020. We first conducted a structured search of three reference databases and three government databases using the phrase “pygmy rabbit” or “ Brachylagus idahoensis .” We refined the initial list of products by removing (1) duplicates, (2) products not written in English, (3) publications that were not focused on North America, (4) publications that were not published as research, data products, or scientific review articles in peer-reviewed journals or as formal technical reports, and (5) products for which pygmy rabbits were not a research focus or for which the study did not present new data or findings about pygmy rabbits. We summarized each product using a consistent structure (background, objectives, methods, location, findings, and implications) and identified the management topics (for example, captive breeding, habitat characteristics, and population estimates) addressed by each product. We also noted which publications included new publicly available geospatial data. The review process for this annotated bibliography included an initial internal colleague review of each summary, requesting input on each summary from an author of the original publication, and a formal peer review. Our initial searches resulted in 2,285 total products, of which 105 met our criteria for inclusion. Sensitive/rare wildlife, behavior or demographics, site-scale habitat characteristics, habitat selection, and effects distances or spatial scale were the management topics most commonly addressed. The online version of this bibliography, Science for Resource Managers, will be searchable by topic, location, and year; it will include links to each original publication, where available. The studies compiled and summarized here may inform planning and management actions that seek to maintain and restore sagebrush landscapes and associated native species across the western United States.

Open-File Report↗
USGS1985

Spatial analysis of extension fracture systems: A process modeling approach

Little consensus exists on how best to analyze natural fracture spacings and their sequences. Field measurements and analyses published in geotechnical literature imply fracture processes radically different from those assumed by theoretical structural geologists. The approach adopted in this paper recognizes that disruption of rock layers by layer-parallel extension results in two spacing distributions, one representing layer-fragment lengths and another separation distances between fragments. These two distributions and their sequences reflect mechanics and history of fracture and separation. Such distributions and sequences, represented by a 2 ?? n matrix of lengthsL, can be analyzed using a method that is history sensitive and which yields also a scalar estimate of bulk extension, e (L). The method is illustrated by a series of Monte Carlo experiments representing a variety of fracture-and-separation processes, each with distinct implications for extension history. Resulting distributions of e (L)are process-specific, suggesting that the inverse problem of deducing fracture-and-separation history from final structure may be tractable. ?? 1985 Plenum Publishing Corporation.

Journal of the International Association for Mathe↗
USGS1976

Fracturing and subsidence of the land surface caused by the withdrawal of ground water in the Milford area, Utah

Fracturing and subsidence of the land surface in the Milford area of Utah have resulted from the decline of water levels due to pumping in unconsolidated deposits of Quaternary age. To the writers' knowledge, these are the first such effects of ground-water withdrawal reported in Utah. The fracturing is in an area about 1 mile (1.6 km) wide and 11 miles (18 km) long near Milford, in an unsaturated clay-silt zone (locally peaty at top) in the upper part of the principal ground-water reservoir. The fractures range in length from several feet to more than 100 feet (30 m), and their maximum measured depth in 1972 was 4 feet (1.2 m). Land subsidence in the Milford area is demonstrated by three lines of evidence: (1) collapse structures, (2) well casings that protrude higher above the land surface than when first placed in the borehole, and (3) lower elevations at National Ocean Survey (formerly U.S. Coast and Geodetic Survey) bench marks in 1970 than in 1908. This evidence shows that land subsidence in the Milford area is of two types, each having a different origin. One type has a near-surface origin in the clay-silt zone in the upper part of the principal groundwater reservoir, and the other is in the lower artesian aquifers of the principal ground-water reservoir. The amount of observed subsidence ranges from 0.05 foot (0.015 m) at the bench mark at Read to about 6 feet (1.8 m) at collapse structures in the Hay Springs area.

Utah↗
USGS1978

Trenches across the 1906 trace of the San Andreas Fault in northern San Mateo County, California

Two trenches were excavated across the 1906 trace of the San Andreas fault near fences that were displaced by the 1906 faulting. About 18 displacements equal to the 1906 displacement would account for the offset of a stream adjacent to one of the trenches. Review of divergent reports on the amount of fault displacement in 1906 at 7 localities indicates that right slip ranged from about 2 in (meters) to about 3 m at the main trace and was about 0.6 m on a subsidiary trace near one of the trench sites. Materials exposed in the trenches included Franciscan bedrock, Merced (?) sandstone, alluvial deposits, and modern soils. Visibility of the evidence for faulting covered a wide range. Faulting was expressed in the trenches as conspicuous color differences, abrupt termination of geologic units, fractures, gouge, granulation of rock, streaked contacts, rounding of rock fragments, and slickensides. Irregularly shaped masses of gouge and other materials found in both trenches may also be a manifestation of faulting. Neither caving of the walls nor the inflow of ground water were reliable indicators of the locations of faults in these trenches. The features exposed in the trenches clearly indicated the presence of an important zone of faults with geologically young displacements, but they were inadequate to identify with certainty the 1906 break or the probable 1838 break. For example, evidence of the 1906 rupture could not be seen in a unit 200 mm (millimeters) thick that is believed to predate 1906. The approximate location in the trenches of the 1906 zone of ruptures could, however, be inferred from surface morphology, historic records, and evidence in the trenches. A moderately sharp and steep contact between two surface soils, in itself suggestive of very young faulting, did not have a fault below it. Brass monuments were installed at the trench sites so that future surface ruptures can be related to the faults and other structures mapped in the trenches.

California↗
USGS1997

Introduction to special section: The Trans-Alaska Crustal Transect (TACT) across Arctic Alaska

This special section of the Journal of Geophysical Research addresses the composition and structural evolution of the lithosphere in northern Alaska. Investigations reported in this section were mainly undertaken as part of the Trans‐Alaska Crustal Transect (TACT), an integrated geological and geophysical transect of the entire Alaskan lithosphere along a north‐south corridor undertaken from 1984 to 1992 (Figure 1). The onshore segment of the transect approximately follows along the route of the trans‐Alaskan pipeline; the offshore segment extends across the continental margin in the Gulf of Alaska to the Pacific plate. The TACT line is unique in that it provides a coordinated onshore/offshore geological and geophysical traverse of the North American plate in Alaska from the active convergent Pacific margin to the passive Arctic margin of the continent.

Alaska↗
USGS1998

Structural control of coalbed methane production in Alabama

Thin-skinned structures are distributed throughout the Alabama coalbed methane fields, and these structures affect the production of gas and water from coal-bearing strata. Extensional structures in Deerlick Creek and Cedar Cove fields include normal faults and hanging-wall rollovers, and area balancing indicates that these structures are detached in the Pottsville Formation. Compressional folds in Gurnee and Oak Grove fields, by comparison, are interpreted to be detachment folds formed above decollements at different stratigraphic levels. Patterns of gas and water production reflect the structural style of each field and further indicate that folding and faulting have affected the distribution of permeability and the overall success of coalbed methane operations. Area balancing can be an effective way to characterize coalbed methane reservoirs in structurally complex regions because it constrains structural geometry and can be used to determine the distribution of layer-parallel strain. Comparison of calculated requisite strain and borehole expansion data from calliper logs suggests that strain in coalbed methane reservoirs is predictable and can be expressed as fracturing and small-scale faulting. However, refined methodology is needed to analyze heterogeneous strain distributions in discrete bed segments. Understanding temporal variation of production patterns in areas where gas and water production are influenced by map-scale structure will further facilitate effective management of coalbed methane fields.Thin-skinned structures are distributed throughout the Alabama coalbed methane fields, and these structures affect the production of gas and water from coal-bearing strata. Extensional structures in Deerlick Creek and Cedar Cove fields include normal faults and hanging-wall rollovers, and area balancing indicates that these structures are detached in the Pottsville Formation. Compressional folds in Gurnee and Oak Grove fields, by comparison, are interpreted to be detachment folds formed above decollements at different stratigraphic levels. Patterns of gas and water production reflect the structural style of each field and further indicate that folding and faulting have affected the distribution of permeability and the overall success of coalbed methane operations. Area balancing can be an effective way to characterize coalbed methane reservoirs in structurally complex regions because it constrains structural geometry and can be used to determine the distribution of layer-parallel strain. Comparison of calculated requisite strain and borehole expansion data from calliper logs suggests that strain in coalbed methane reservoirs is predictable and can be expressed as fracturing and small-scale faulting. However, refined methodology is needed to analyze heterogeneous strain distributions in discrete bed segments. Understanding temporal variation of production patterns in areas where gas and water production are influenced by map-scale structure will further facilitate effective management of coalbed methane fields.

International Journal of Coal Geology↗
USGS2022

Rift flank segmentation, basin initiation and propagation: a neotectonic example from Lake Baikal

New surficial data (field, Landsat TM and topography) define morpho-tectonic domains and rift flank segmentation in the Ol'khon region of the Central Baikal rift. Deformation, drainage and depositional patterns indicate a change in the locus of active extension that may relate to a recent (<l Ma) change in the kinematics of the Siberian plate boundary. The westwards migration of the border fault location has broadened the rift with concomitant shifts in depocentres. Within the hanging wall of the new western border fault, distinct segments control the location of drainage paths and syn-rift deposits. Morphology, sediment thicknesses and fault scarp amplitude indicate that a segmented rift flank graben has propagated southwards along the rift flank and is still actively fragmenting. These surficial data are used to constrain a model for the time-dependent topographic variations during progressive subsidence along a rift flank, involving the transfer of footwall units to hanging-wall domains. Rapid changes in border fault footwall relief in this model are associated with change in the active border fault location with widespread mass-wasting. The model shows that time-dependent histories need to be integrated with flexural uplift models for active normal faults. The active, syn-rift depositional systems of the Ol'khon region provide a valuable analogue for the early evolution of continental margins and the structural controls on syn-rift hydrocarbon sources and reservoirs.

Siberia↗