Search USGS⌕ Search

SEARCH · Search USGS

Results for “Ground Water Modeling Investigation Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

Surface-geophysical investigation of a formerly used defense site, Machiasport, Maine, February 2003

Surface-geophysical surveys were conducted in February 2003 at a formerly used defense site in Maine, where residual chlorinated solvents are affecting off-site domestic water-supply wells. The U.S. Geological Survey and Argonne National Laboratory used surface-geophysical methods, including ground-penetrating radar and seismic-refraction tomography, to characterize the lithology and structure of the bedrock at the site and to identify highly fractured areas that may provide pathways for ground-water flow and contaminant transport. Multifrequency electromagnetic and inductive terrain-conductivity methods also were evaluated, but these techniques were adversely affected by a nearby naval computer and telecommunications station. Interpretation of the data from ground-penetrating radar indicates that depth to the weathered bedrock surface is approximately 0.5 to 3 meters. Reflections from within the bedrock are visible throughout all ground-penetrating radar profiles, and zones of scattered electromagnetic energy may correlate to zones of highly fractured bedrock. Interpretation of the data from seismic-refraction tomography inversion indicates that zones of relatively low seismic velocity and topographic lows may correlate with fractured and water-producing intervals within the bedrock. Integrated interpretation of the results from ground-penetrating radar and seismic-refraction tomography was used to locate boreholes along the surface-geophysical profiles. An integrated analysis of information obtained from the surface- and borehole-geophysical surveys and test drilling will be used by the U.S. Army Corps of Engineers to develop a conceptual model of ground-water flow and solute transport at the site.

Maine↗

Simulation of the interaction of karstic lakes Magnolia and Brooklyn with the upper Floridan Aquifer, southwestern Clay County, Florida

The stage of Lake Brooklyn, in southwestern Clay County, Florida, has varied over a range of 27 feet since measurements by the U.S. Geological Survey began in July 1957. The large stage changes have been attributed to the relation between highly transient surface-water inflow to the lake and subsurface conduits of karstic origin that permit a high rate of leakage from the lake to the Upper Floridan aquifer. After the most recent and severe stage decline (1990-1994), the U.S. Geological Survey began a study that entailed the use of numerical ground-water flow models to simulate the interaction of the lake with the Upper Floridan aquifer and the large fluctuations of stage that were a part of that process. A package (set of computer programs) designed to represent lake/aquifer interaction in the U.S. Geological Survey Modular Finite-Difference Ground-Water Flow Model (MODFLOW-96) and the Three-Dimensional Method-of-Characteristics Solute-Transport Model (MOC3D) simulators was prepared as part of this study, and a demonstration of its capability was a primary objective of the study. (Although the official names are Brooklyn Lake and Magnolia Lake (Florida Geographic Names), in this report the local names, Lake Brooklyn and Lake Magnolia, are used.) In the simulator of lake/aquifer interaction used in this investigation, the stage of each lake in a simulation is updated in successive time steps by a budget process that takes into account ground-water seepage, precipitation upon and evaporation from the lake surface, stream inflows and outflows, overland runoff inflows, and augmentation or depletion by artificial means. The simulator was given the capability to simulate both the division of a lake into separate pools as lake stage falls and the coalescence of several pools into a single lake as the stage rises. This representational capability was required to simulate Lake Brooklyn, which can divide into as many as 10 separate pools at sufficiently low stage. In the first of two calibrated models, recharge to the water table, specified as a monthly rate, was set equal to 40 percent of the monthly rainfall rate. The specified rate of inflow to the uppermost stream segment was set equal to outflows from Lake Lowry estimated from lake stage and the 1994-97 rating table. Leakage to the intermediate and Upper Floridan aquifers was assumed to occur from the surficial aquifer system through the confining layers directly beneath deeper parts of the lake bottom. A leakance coefficient value of 0.001 feet per day per foot of thickness was used beneath Lake Magnolia, and a value of 0.005 feet per day per foot of thickness was used beneath most of Lake Brooklyn. With these values, the conductance through the confining layers beneath Lake Brooklyn was about 19 times that beneath Lake Magnolia. The simulated stages of Lake Brooklyn matched the measured stages reasonably well in the early (1957-72) and later (1990-98) parts of the simulation time period, but the match was unsatisfactory in an intermediate time period (1973-89). To resolve this discrepancy, the hypothesis was proposed that undocumented losses of water from Alligator Creek upstream from Lake Brooklyn or from the lake itself occurred between 1973 and 1989 when there was sufficient streamflow. The resulting simulation of lake stages matched the measured lake stages accurately during the entire simulation time period. The model was then revised to incorporate the assumption that only 20 percent of precipitation recharged the water table (the second calibrated model). Recalibration of the model required that leakance values for the confining units under deeper parts of the lakes also be reduced by nearly 50 percent. The stages simulated with the new parameter assumptions, but retaining the assumption of surface-water losses, were an excellent match of the measured values. The stage of Lake Magnolia was also simulated accurately. The results of sensitivity analyses show that simulated streamflow between Lakes Magnolia and Brooklyn tends to be water-budget controlled, and is not appreciably affected by the specified outflow altitude or channel characteristics of the receiving stream. To match heads measured in observation wells of the surficial aquifer network, the assigned hydraulic conductivity values were zoned, and ranged from a minimum of 4 feet per day to a maximum of 400 feet per day in the first calibrated model. These values were reduced by about 50 percent in the second calibrated model. Differences between observation wells were noted in the abruptness of changes of measured head values, and in the relation of the timing of peak measured heads and simulated peak heads. These differences seemed to be correlated with the depth of the water table below land surface. Spatially uniform values of transmissivity were specified for the intermediate (10,000 feet squared per day) and Upper Floridan (100,000 feet squared per day) aquifers. Simulated heads in the Upper Floridan aquifer layer follow the trend of the heads measured in a long-term observation well with data beginning in 1960. This result suggests that the observed head decline could be explained entirely in terms of the stage decline in Lake Brooklyn and may not indicate a regional trend.

Florida↗

User's guide to the Variably Saturated Flow (VSF) process to MODFLOW

A new process for simulating three-dimensional (3-D) variably saturated flow (VSF) using Richards' equation has been added to the 3-D modular finite-difference ground-water model MODFLOW. Five new packages are presented here as part of the VSF Process--the Richards' Equation Flow (REF1) Package, the Seepage Face (SPF1) Package, the Surface Ponding (PND1) Package, the Surface Evaporation (SEV1) Package, and the Root Zone Evapotranspiration (RZE1) Package. Additionally, a new Adaptive Time-Stepping (ATS1) Package is presented for use by both the Ground-Water Flow (GWF) Process and VSF. The VSF Process allows simulation of flow in unsaturated media above the ground-water zone and facilitates modeling of ground-water/surface-water interactions. Model performance is evaluated by comparison to an analytical solution for one-dimensional (1-D) constant-head infiltration (Dirichlet boundary condition), field experimental data for a 1-D constant-head infiltration, laboratory experimental data for two-dimensional (2-D) constant-flux infiltration (Neumann boundary condition), laboratory experimental data for 2-D transient drainage through a seepage face, and numerical model results (VS2DT) of a 2-D flow-path simulation using realistic surface boundary conditions. A hypothetical 3-D example case also is presented to demonstrate the new capability using periodic boundary conditions (for example, daily precipitation) and varied surface topography over a larger spatial scale (0.133 square kilometer). The new model capabilities retain the modular structure of the MODFLOW code and preserve MODFLOW's existing capabilities as well as compatibility with commercial pre-/post-processors. The overall success of the VSF Process in simulating mixed boundary conditions and variable soil types demonstrates its utility for future hydrologic investigations. This report presents a new flow package implementing the governing equations for variably saturated ground-water flow, four new boundary condition packages unique to unsaturated flow, the Adaptive Time-Stepping Package for use with both the GWF Process and the new VSF Process, detailed descriptions of the input and output files for each package, and six simulation examples verifying model performance.

Techniques and Methods↗

A modular finite-element model (MODFE) for areal and axisymmetric ground-water-flow problems, Part 2: Derivation of finite-element equations and comparisons with analytical solutions

MODFE, a modular finite-element model for simulating steady- or unsteady-state, area1 or axisymmetric flow of ground water in a heterogeneous anisotropic aquifer is documented in a three-part series of reports. In this report, part 2, the finite-element equations are derived by minimizing a functional of the difference between the true and approximate hydraulic head, which produces equations that are equivalent to those obtained by either classical variational or Galerkin techniques. Spatial finite elements are triangular with linear basis functions, and temporal finite elements are one dimensional with linear basis functions. Physical processes that can be represented by the model include (1) confined flow, unconfined flow (using the Dupuit approximation), or a combination of both; (2) leakage through either rigid or elastic confining units; (3) specified recharge or discharge at points, along lines, or areally; (4) flow across specified-flow, specified-head, or head-dependent boundaries; (5) decrease of aquifer thickness to zero under extreme water-table decline and increase of aquifer thickness from zero as the water table rises; and (6) head-dependent fluxes from springs, drainage wells, leakage across riverbeds or confining units combined with aquifer dewatering, and evapotranspiration. The matrix equations produced by the finite-element method are solved by the direct symmetric-Doolittle method or the iterative modified incomplete-Cholesky conjugate-gradient method. The direct method can be efficient for small- to medium-sized problems (less than about 500 nodes), and the iterative method is generally more efficient for larger-sized problems. Comparison of finite-element solutions with analytical solutions for five example problems demonstrates that the finite-element model can yield accurate solutions to ground-water flow problems.

Techniques of Water-Resources Investigations↗

Hydrogeology and Potentiometric Surface of the Dublin and Midville Aquifer Systems in Richmond County, Georgia, January 2007

INTRODUCTION The Dublin and Midville aquifer systems are part of the Cretaceous aquifer system that underlies most of Richmond County, Georgia (Gorday, 1985; Falls and others, 1997). The Cretaceous aquifer system is the second most productive aquifer in Georgia and is a major source of water in the region. About 220 million gallons per day (Mgal/d) of water was withdrawn from the Cretaceous aquifer system during 2000 in Georgia (Fanning, 2003). The Augusta-Richmond County Water System is the largest public water supplier in the county and withdrew 13 Mgal/d of ground water during 2000; withdrawals decreased from 2001 to 2005. The towns of Hephzibah and Blythe withdrew 0.4 and 0.03 Mgal/d, respectively. Industrial ground-water withdrawals are concentrated along the Savannah River and totaled 2.89 Mgal/d. To monitor seasonal and long-term water-level fluctuations and trends in the aquifers, the U.S. Geological Survey (USGS) - in cooperation with Augusta Utilities - maintains a countywide network of about 100 water-level monitoring wells in various aquifers, including a new continuous monitoring site (well 30AA33) and two existing USGS-Georgia Environmental Protection Division network sites (wells 29AA09 and 30AA04). Data compiled during this study were used to better define the hydrogeologic units and to construct an updated potentiometric-surface map for the area, which is used to better understand ground-water movement in the Cretaceous aquifer system. In addition, the potentiometric surface and related water-level data can be used for water-resource planning and to update ground-water flow models for the region (Clarke and West, 1997; Cherry, 2006).

Georgia↗

Ground-water-withdrawal component of the Michigan water-withdrawal screening tool

A water-withdrawal assessment process and Internet-based screening tool have been developed to evaluate proposed new or increased high-capacity water withdrawals in Michigan. Michigan legislation defines high capacity withdrawals as those capable of removing an average of 100,000 gallons per day for a consecutive 30-day period. This report describes the ground-water component of the screening tool, provides background information used to develop the screening tool, and documents how this component of the screening tool is implemented. The screening tool is based on application of an analytical model to estimate streamflow depletion by a proposed pumping well. The screening tool is designed to evaluate intermittent pumping, to account for the dynamics of stream-aquifer interaction, and to apportion streamflow depletion among neighboring streams. The tool is to be used for an initial screening of a proposed new or increased high-capacity withdrawal in order to identify withdrawals that may cause adverse resource impacts. The screening tool is not intended to be a site-specific design tool. Results of an example application of the screening tool in Kalamazoo County, Mich., are compared to streamflow depletion estimated by use of a regional ground-water-flow model to demonstrate its performance.

Michigan↗

Apparent chlorofluorocarbon age of ground water of the shallow aquifer system, Naval Weapons Station Yorktown, Yorktown, Virginia

Apparent ages of ground water are useful in the analysis of various components of flow systems, and results of this analysis can be incorporated into investigations of potential pathways of contaminant transport. This report presents the results of a study in 1997 by the U.S. Geological Survey (USGS), in cooperation with the Naval Weapons Station Yorktown, Base Civil Engineer, Environmental Directorate, to describe the apparent age of ground water of the shallow aquifer system at the Station. Chlorofluorocarbons (CFCs), tritium ( 3 H), dissolved gases, stable isotopes, and water-quality field properties were measured in samples from 14 wells and 16 springs on the Station in March 1997. Nitrogen-argon recharge temperatures range from 5.9°C to 17.3°C with a median temperature of 10.9°C, which indicates that ground-water recharge predominantly occurs in the cold months of the year. Concentrations of excess air vary depending upon geohydrologic setting (recharge and discharge areas). Apparent ground-water ages using a CFC-based dating technique range from 1 to 48 years with a median age of 10 years. The oldest apparent CFC ages occur in the upper parts of the Yorktown-Eastover aquifer, whereas the youngest apparent ages occur in the Columbia aquifer and the upper parts of the discharge area setting, especially springs. The vertical distribution of apparent CFC ages indicates that groundwater movement between aquifers is somewhat retarded by the leaky confining units, but the elapsed time is relatively short (generally less than 35 years), as evidenced by the presence of CFCs at depth. The identification of binary mixtures by CFC-based dating indicates that convergence of flow lines occurs not only at the actual point of discharge, but also in the subsurface. The CFC-based recharge dates are consistent with expected 3 H concentrations measured in the water samples from the Station. The concentration of 3H in ground water ranges from below the USGS laboratory minimum reporting limit of 0.3 to 15.9 tritium units (TU) with a median value of 10.8 TU. Water-quality field properties are highly variable for ground water with apparent CFC ages less than 15 years because of geochemical processes within local flow systems. Ground water with apparent CFC ages greater than 15 years represents more stable conditions in subregional flow systems. The range of apparent CFC ages is slightly greater than the ranges in time of travel of ground water calculated for shallow wells (less than 60- feet deep) from flow-path analysis. Calculated travel times to springs can be up to two orders of magnitude greater than the CFC-based apparent ages. Reasonable assumptions of values for hydraulic parameters can result in substantial overestimates for time of travel to springs. Recharge rates computed from apparent CFC ages range from 0.29 to 0.89 feet per year (ft/ yr) with an average value of 0.54 ft/yr. The analysis of apparent CFC ages in conjunction with geohydrologic data indicates that young water (less than 50 years) is present at depth (nearly 120 feet) and that both local and subregional flow systems occur in the shallow aquifer system at the Station. The addition of the dimension of time to the three-dimensional framework of Brockman and others (1997) will benefit current (2001) and future remediation activities by providing estimates of advective transport rates and how these rates vary depending upon geohydrologic setting and position within the ground-water-flow system. Estimated ground-water apparent ages and recharge rates can be used as calibration criteria in simulations of ground-water flow on the Station to refine and constrain future ground-water-flow models of the shallow aquifer system.

Virginia↗

Geology of the Tulare Formation and other continental deposits, Kettleman City area, San Joaquin Valley, California, with a section on ground-water management considerations and use of texture maps

The Tulare Formation and other continental deposits of Pliocene to Holocene age crop out over most of the area near Kettleman City in the San Joaquin Valley of California. The deposits range in thickness from 0 to more than 4,000 feet and overlie the upper Mya zone of the San Joaquin Formation of Pliocene age. Some features of their base reflect structural deformation during Quaternary time. Many freshwater fossils occur in the Tulare Formation itself, including the largest fossil assemblage of clams and snails known on the Pacific Coast. Sediments in the Tulare Formation and other continental deposits consist mainly of unconsolidated deposits of clay, silt, sand, and gravel. Texture maps of the Tulare Formation and other continental deposits show the distribution, both laterally and vertically, of the coarse- and fine-grained sediment in the area. Such maps can be used by water managers for selecting areas for recharge and discharge operations and by ground-water modelers for assigning relative values of hydraulic conductivity and storage coefficient.

California↗

Hydrogeology and results of tracer tests at the old Tampa well field in Hillsborough County, with implications for wellhead-protection strategies in west-central Florida

Wellhead-protection strategies were evaluated for the Upper Floridan aquifer of west-central Florida using the old Tampa well field in northeastern Hillsborough County, Florida, as a test site. The upper 400 feet of the Upper Floridan aquifer responded to pumping as an equivalent, porous medium for a range of discharge rates from 450 to 1,000 gallons per minute. Transmissivity and storage coefficient values determined for the Upper Floridan aquifer were 23,000 feet squared per day and 0.0001, respectively. Rock cores from the Upper Floridan aquifer have effective porosity values from 21 to 46 percent. Tracer tests were conducted using a fluorescent dye. A bimodal distribution of tracer arrival times indicates ground-water flow through a dual porosity system. Analysis of tracer test results an effective porosity of 25 percent and a longitudinal dispersivity of 1.3 feet for the aquifer matrix. A numerical aquifer-simulation equivalent porous media model of the Upper Floridan aquifer was calibrated using results of aquifer tests. A particle-tracking program was used to simulate the matrix flow groundwater travel time measured with the fluorescent dye tracer test. An evaluation of wellhead-protection strategies was conducted using the particle-tracking program to simulate areas of contribution from the aquifer matrix. The results of this study demonstrate the heterogeneity of the Upper Floridan aquifer. Because of this heterogeneity, the use of uniform porosity models to delineate time-related areas of wellhead protection in the karst Upper Floridan aquifer is inappropriate; however, ground-water movement in the aquifer matrix can be simulated with uniform porosity models.

Water-Resources Investigations Report↗

Application of a Geographic Information System for regridding a ground-water flow model of the Columbia Plateau Regional Aquifer System, Walla Walla River basin, Oregon-Washington

Computerized Geographic Information Systems (GIS) have become viable and valuable tools for managing,analyzing, creating, and displaying data for three-dimensional finite-difference ground-water flow models. Three GIS applications demonstrated in this study are: (1) regridding of data arrays from an existing large-area, low resolution ground-water model to a smaller, high resolution grid; (2) use of GIS techniques for assembly of data-input arrays for a ground-water model; and (3) use of GIS for rapid display of data for verification, for checking of ground-water model output, and for the cre.ation of customized maps for use in reports. The Walla Walla River Basin was selected as the location for the demonstration because (1) data from a low resolution ground-water model (Columbia Plateau Regional Aquifer System Analysis [RASA]) were available and (2) concern for long-term use of water resources for irrigation in the basin. The principal advantage of regridding is that it may provide the ability to more precisely calibrate a model, assuming chat a more detailed coverage of data is available, and to evaluate the numerical errors associated with a particular grid design.Regridding gave about an 8-fold increase in grid-node density.Several FORTRAN programs were developed to load the regridded ground-water data into a finite-difference modular model as model-compatible input files for use in a steady-state model run.To facilitate the checking and validating of the GIS regridding process, maps and tabular reports were produced for each of eight ground-water parameters by model layer. Also, an automated subroutine that was developed to view the model-calculated water levels in cross-section will aid in the synthesis and interpretation of model results.

Water-Resources Investigations Report↗

Effects of Irrigation, Drought, and Ground-Water Withdrawals on Ground-Water Levels in the Southern Lihue Basin, Kauai, Hawaii

A numerical ground-water-flow model was used to investigate the effects of irrigation on ground-water levels in the southern Lihue Basin, Kauai, Hawaii, and the relation between declining ground-water levels observed in the basin in the 1990s and early 2000s and concurrent drought, irrigation reduction, and changes in ground-water withdrawal. Results of steady-state model simulations indicate that changing from pre-development to 1981 irrigation and ground-water-withdrawal conditions could, given enough time for steady state to be achieved, raise ground-water levels in some areas of the southern Lihue Basin by as much as 200 feet, and that changing from 1981 to 1998 irrigation and ground-water-withdrawal conditions could lower ground-water levels in some areas by as much as 100 feet. Transient simulations combining drought, irrigation reduction, and changes in ground-water withdrawal show trends that correspond with those observed in measured water levels. Results of this study indicate that irrigation reduction was the primary cause of the observed decline in ground-water-levels. In contrast, ground-water withdrawal had a long-duration but small-magnitude effect, and drought had a widespread, high-magnitude but short-duration effect. Inasmuch as irrigation in the future is unlikely to return to the same levels as during the period of peak sugarcane agriculture, the decline in ground-water levels resulting from the reduction and ultimate end of sugarcane irrigation can be considered permanent. Assuming that irrigation does not return to the southern Lihue Basin and that, on average, normal rainfall persists and ground-water withdrawal remains at 1998 rates, model projections indicate that average ground-water levels in the Kilohana-Puhi area will continue to recover from the drought of 1998-2002 and eventually rise to within about 4 feet of the pre-drought conditions. Long-term climate trends, increases in ground-water withdrawal, or other factors not simulated in the model could also affect ground-water levels in the southern Lihue Basin in the future.

Scientific Investigations Report↗

Ground-water models as a management tool in Florida

Highly sophisticated computer models provide powerful tools for analyzing historic data and for simulating future water levels, water movement, and water chemistry under stressed conditions throughout the ground-water system in Florida. Models that simulate the movement of heat and subsidence of land in response to aquifer pumping also have potential for application to hydrologic problems in the State. Florida, with 20 ground-water modeling studies reported since 1972, has applied computer modeling techniques to a variety of water-resources problems. Models in Florida generally have been used to provide insight to problems of water supply, contamination, and impact on the environment. The model applications range from site-specific studies, such as estimating contamination by wastewater injection at St. Petersburg, to a regional model of the entire State that may be used to assess broad-scale environmental impact of water-resources development. Recently, groundwater models have been used as management tools by the State regulatory authority to permit or deny development of water resources. As modeling precision, knowledge, and confidence increase, the use of ground-water models will shift more and more toward regulation of development and enforcement of environmental laws. (USGS)

Water-Resources Investigations Report↗

Vertical profiles of streambed hydraulic conductivity determined using slug tests in central and western Nebraska

Many issues of water-resources management rely on modeling of ground-water/surfacewater interactions, and streambed hydraulic conductivity is a key parameter controlling the water fluxes across the stream/aquifer interface. However, in central and western Nebraska, this parameter is generally undefined. The U.S. Geological Survey, in cooperation with the Nebraska Platte River Cooperative Hydrology Study Group, performed slug tests at 15 stream sites in the Platte, Republican, and Little Blue River watersheds to determine the hydraulic conductivity of streambeds in central and western Nebraska. Slug tests were completed at several discrete depth intervals using pneumatic or mechanical methods, and the water-level response was monitored on site using a pressure transducer and laptop computer. Responses were analyzed using either the Bouwer and Rice or Springer and Gelhar methods. Vertical profiles of hydraulic conductivity with depth were developed and were compared to available information on lithology. The profiles and corresponding lithology showed that different types of streambeds were tested and suggested that some streambeds display a large variability in hydraulic conductivity with depth. In some cases, hydraulic conductivity values associated with nonstreambed materials could be identified from nearby lithologic descriptions. Seven of 15 sites had streambed values that ranged over more than 3 orders of magnitude, and that variability increased significantly when the measurements considered to be from nonstreambed materials were included. Streambed profiles from the Platte and South Platte River sites generally were more homogeneous and of larger hydraulic conductivity than the other sites. No restrictive layers were detected at any of the streambed sites on the main stems or the flood plains of the main stems of their respective watersheds. Alternatively, the profiles characterized by a restrictive streambed layer at some depth below the streambed surface were all from tributary sites out of the main-stem flood plain. These profiles can be used to represent the streambed hydraulic conductivity in central and western Nebraska in various applications, including modeling ground-water/surfacewater interactions.

Nebraska↗