Search USGS⌕ Search

SEARCH · Search USGS

Results for “Environmental Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2011

Interlaboratory comparison of real-time pcr protocols for quantification of general fecal indicator bacteria

The application of quantitative real-time PCR (qPCR) technologies for the rapid identification of fecal bacteria in environmental waters is being considered for use as a national water quality metric in the United States. The transition from research tool to a standardized protocol requires information on the reproducibility and sources of variation associated with qPCR methodology across laboratories. This study examines interlaboratory variability in the measurement of enterococci and Bacteroidales concentrations from standardized, spiked, and environmental sources of DNA using the Entero1a and GenBac3 qPCR methods, respectively. Comparisons are based on data generated from eight different research facilities. Special attention was placed on the influence of the DNA isolation step and effect of simplex and multiplex amplification approaches on interlaboratory variability. Results suggest that a crude lysate is sufficient for DNA isolation unless environmental samples contain substances that can inhibit qPCR amplification. No appreciable difference was observed between simplex and multiplex amplification approaches. Overall, interlaboratory variability levels remained low (<10% coefficient of variation) regardless of qPCR protocol.

Environmental Science & Technology↗
USGS2020

Use of environmental DNA to detect grass carp spawning events

The timing and location of spawning events are important data for managers seeking to control invasive grass carp populations. Ichthyoplankton tows for grass carp eggs and larvae can be used to detect spawning events; however, these samples can be highly debris-laden, and are expensive and laborious to process. An alternative method, environmental DNA (eDNA) technology, has proven effective in determining the presence of aquatic species. The objectives of this project were to assess the use of eDNA collections and quantitative eDNA analysis to assess the potential spawning of grass carp in five reservoir tributaries, and to compare those results to the more traditional method of ichthyoplankton tows. Grass carp eDNA was detected in 56% of sampling occasions and was detected in all five rivers. Concentrations of grass carp eDNA were orders of magnitude higher in June, corresponding to elevated discharge and egg presence. Grass carp environmental DNA flux (copies/h) was lower when no eggs were present and was higher when velocities and discharge increased and eggs were present. There was a positive relationship between grass carp eDNA flux and egg flux. Our results support the further development of eDNA analysis as a method to detect the spawning events of grass carp or other rheophilic spawners.

Fishes↗
USGS2002

Ubiquitous tar balls with a California-source signature on the shorelines of Prince William Sound, Alaska

Although the shorelines of Prince William Sound still bear traces of the 1989 Exxon Valdez oil spill, most of the flattened tar balls that can be found today on these shorelines are not residues of Exxon Valdez oil. Instead, the carbon-isotopic and hydrocarbonbiomarker signatures of 61 tar ball samples, collected from shorelines throughout the northern and western parts of the sound, are all remarkably similar and have characteristics consistent with those of oil products that originated from the Monterey Formation source rocks of California. The carbonisotopic compositions of the tar balls are all closely grouped (<513Cpdb = -23.7 ± 0.2%o), within the range found in crude oils from those rocks, but are distinct from isotopic compositions of 28 samples of residues from the Exxon ValdezoW spill (<513Cpdb = -29.4 ± 0.1%o). Likewise, values for selected biomarker ratios in the tar balls are all similar but distinct from values of residues from the 1989 oil spill. Carbon-isotopic and biomarker signatures generally relate the tar balls to oil products used in Alaska before ~1970 for construction and pavements. How these tar balls with such similar geochemical characteristics became so widely dispersed throughout the northern and western parts of the sound is not known with certainty, but the great 1964 Alaska earthquake was undoubtedly an important trigger, causing spills from ruptured storage facilities of California-sourced asphalt and fuel oil into Prince William Sound.

Alaska↗
USGS2012

Global exploration and production capacity for platinum-group metals from 1995 through 2015

Platinum-group metals (PGMs) are required in a variety of commercial, industrial, and military applications for many existing and emerging technologies, yet the United States is highly dependent on foreign sources of PGMs. Information on global exploration for PGMs since 1995 has been used in this study as a basis for identifying locations where the industry has determined that exploration has provided data sufficient to warrant development of a new mine or expansion of an existing operation or where a significant increase in capacity for PGMs is anticipated by 2015. Discussions include an overview of the industry and the selected sites, factors affecting mineral supply, and circumstances leading to the development of mineral properties with the potential to affect mineral supply. Of the 52 sites or regional operations that were considered in this analysis, 16 sites were producing before 1995, 28 sites commenced production from 1995 through 2010, and 8 sites were expected to begin production from 2011 through 2015 if development plans came to fruition. The United States imports PGMs primarily from Canada, Russia, South Africa, and Zimbabwe to meet increasing demand for these materials in a variety of specialized and high-tech applications. Feed sources of PGMs are changing in South Africa and Russia, which together accounted for about 89 percent of platinum production and 82 percent of palladium production in 2009. A greater amount of South African PGM capacity is likely to come from deeper, higher cost Upper Group Reef seam 2 deposits and deposits in the Eastern Bushveld area. Future Russian PGM capacity is likely to come from ore zones with generally lower PGM content and different platinum-to-palladium ratios than the nickel-rich ore that dominated PGM supply in the 1990s. Because PGM supply from Canada and Russia is derived as a byproduct of copper and nickel mining, the PGM supply from these countries is influenced by economic, environmental, political, and technological factors affecting exploration for and development of copper and nickel, as well as factors affecting the PGM industry. The recovery of PGMs from mill tailings since 2004 and the recycling of PGMs from catalytic converters, electrical components, and jewelry has increased since 1995 so that recycled PGMs recovered from these products accounted for about 30 percent of the supply of platinum worldwide and 29 percent of the supply of palladium worldwide in 2010. Economic and geopolitical conditions have influenced PGM supply and demand. The global recession of 2008 and 2009 temporarily decreased demand for PGMs and constrained PGM mine exploration and development, at least through 2010. Legislation regulating the structure of the mining sector has affected mining in Russia, South Africa, and Zimbabwe. Stricter vehicle emissions standards in established markets since the 1980s have led to mandatory use of pollution control devices, such as catalytic converters, that contain PGMs and are required on vehicles in expanding markets, such as China and India. It is expected that South Africa, Russia, Canada, and Zimbabwe will continue to be the principal sources of PGM at least for the next decade. Based on this review of the PGM industry, the world’s platinum capacity, expressed in terms of recoverable platinum metal, increased from 1995 through 2010 by 77,000 kilograms (kg) in South Africa, 9,000 kg in Zimbabwe, 6,000 kg in Russia, 2,000 kg in Botswana, and 2,000 kg in Canada. For the same period, palladium capacity worldwide increased by 44,000 kg in South Africa, 22,000 kg in Russia, 8,000 kg in Canada, 8,000 kg in the United States, 7,000 kg in Zimbabwe, and 3,000 kg in Botswana. Platinum capacity worldwide is expected to further increase by 24,000 kg in South Africa, 9,000 kg in Russia, 3,000 kg in Canada, and 2,000 kg in Zimbabwe from 2011 through 2015. Palladium capacity worldwide is likewise expected to increase an additional 16,000 kg in Russia, 14,000 kg in South Africa, 4,000 kg in Zimbabwe, and 1,000 kg in Canada if new or expanded mine and associated processing capacity comes into production as planned. It is likely that the magnitude of these changes in PGM capacity has been influenced by such factors as the global economy, electrical capacity shortages and mine safety concerns in South Africa, and geopolitical conditions in the major PGM producing countries.

Scientific Investigations Report↗
USGS2011

Mercury export from the Yukon River Basin and potential response to a changing climate

We measured mercury (Hg) concentrations and calculated export and yield from the Yukon River Basin (YRB) to quantify Hg flux from a large, permafrost-dominated, high-latitude watershed. Exports of Hg averaged 4400 kg Hg yr -1 . The average annual yield for the YRB during the study period was 5.17 &mu;g m -2 yr -1 , which is 3&ndash;32 times more than Hg yields reported for 8 other major northern hemisphere river basins. The vast majority (90%) of Hg export is associated with particulates. Half of the annual export of Hg occurred during the spring with about 80% of 34 samples exceeding the U.S. EPA Hg standard for adverse chronic effects to biota. Dissolved and particulate organic carbon exports explained 81% and 50%, respectively, of the variance in Hg exports, and both were significantly ( p < 0.001) correlated with water discharge. Recent measurements indicate that permafrost contains a substantial reservoir of Hg. Consequently, climate warming will likely accelerate the mobilization of Hg from thawing permafrost increasing the export of organic carbon associated Hg and thus potentially exacerbating the production of bioavailable methylmercury from permafrost-dominated northern river basins.

Alaska↗
USGS2020

Using environmental DNA (eDNA) to detect the endangered Spectaclecase Mussel ( Margaritifera monodonta )

Margaritifera monodonta , or the Spectaclecase Mussel, is a federally endangered freshwater mussel species that has experienced a 55% reduction in range and is currently concentrated in 3 rivers in the Midwest region of the United States (Gasconade and Meramec rivers, Missouri, and St Croix River, Wisconsin). The detection of new populations by traditional survey methods has been limited because these mussels tend to occur under large rocks and boulders. Environmental DNA (eDNA) technology has been used to detect invasive and rare species, but its use for detection of rare, benthic-dwelling species in large flowing systems has been limited. Here, we propose using eDNA to assess known populations of M. monodonta . We designed a M. monodonta -specific quantitative polymerase chain reaction (qPCR) assay and tested it using water samples from multiple M. monodonta housing tanks, water samples from 2 known mussel beds on the St Croix River, and water samples from 3 known mussel beds on the Mississippi River. We observed higher overall eDNA detection rates on the St Croix River (30.2%) compared to the upper Mississippi River (0.60%). We also observed higher eDNA detection rates (73.3–93.1%) in 2018 for samples collected during the larval release period in May compared to samples collected in August after the reproductive period had ended (55.6–70.8%) on the St Croix River. We tested samples collected at 3 distances downstream from the 2 mussel beds found in the St Croix River, but we did not observe a substantial effect of distance on our detection rates. However, we did observe greater detection rates for samples collected near the bottom compared to at the surface. Our results indicate that this novel qPCR assay can successfully detect M. monodonta eDNA and could be used to rapidly screen locations to guide intensive physical searches for populations in riverine systems.

Wisconsin, Missouri↗
USGS2007

Coastal Prairie Restoration Information System: Version 1 (Louisiana)

The Coastal Prairie Restoration Information System (CPR) is a Microsoft Access database that allows users to query and view data about Louisiana coastal prairie species. Less than 0.1% of Louisiana's coastal prairie vegetation remains in a relatively undisturbed condition. Encompassing as much as 1 million hectares of land, coastal prairie is a hybrid of coastal wetlands and tall grass prairie. Over 550 plant species have been identified in Louisiana's coastal prairies to date. Efforts to conserve and restore this endangered ecosystem are limited by the ability of workers to identify and access knowledge about this diverse group of plants. In this database, a variety of data are provided for each of 650 coastal prairie species in Louisiana. The database was developed at the U.S. Geological Survey National Wetlands Research Center by Larry Allain, with software development by Myra Silva. Additional funding was provided by the biology department of the University of Louisiana at Lafayette (ULL), the ULL Center for Environmental and Ecological Technology, and the National Science Foundation.

Data Series↗
USGS2011

Wind energy in the United States and materials required for the land-based wind turbine industry from 2010 through 2030

The generation of electricity in the United States from wind-powered turbines is increasing. An understanding of the sources and abundance of raw materials required by the wind turbine industry and the many uses for these materials is necessary to assess the effect of this industry's growth on future demand for selected raw materials relative to the historical demand for these materials. The U.S. Geological Survey developed estimates of future requirements for raw (and some recycled) materials based on the assumption that wind energy will supply 20 percent of the electricity consumed in the United States by 2030. Economic, environmental, political, and technological considerations and trends reported for 2009 were used as a baseline. Estimates for the quantity of materials in typical "current generation" and "next generation" wind turbines were developed. In addition, estimates for the annual and total material requirements were developed based on the growth necessary for wind energy when converted in a wind powerplant to generate 20 percent of the U.S. supply of electricity by 2030. The results of the study suggest that achieving the market goal of 20 percent by 2030 would require an average annual consumption of about 6.8 million metric tons of concrete, 1.5 million metric tons of steel, 310,000 metric tons of cast iron, 40,000 metric tons of copper, and 380 metric tons of the rare-earth element neodymium. With the exception of neodymium, these material requirements represent less than 3 percent of the U.S. apparent consumption for 2008. Recycled material could supply about 3 percent of the total steel required for wind turbine production from 2010 through 2030, 4 percent of the aluminum required, and 3 percent of the copper required. The data suggest that, with the possible exception of rare-earth elements, there should not be a shortage of the principal materials required for electricity generation from wind energy. There may, however, be selective manufacturing shortages if the total demand for raw materials from all markets is greater than the available supply of these materials or the capacity of industry to manufacture components. Changing economic conditions could also affect the development schedule of anticipated capacity.

Scientific Investigations Report↗
USGS2011

Cobalt mineral exploration and supply from 1995 through 2013

The global mining industry has invested a large amount of capital in mineral exploration and development over the past 15 years in an effort to ensure that sufficient resources are available to meet future increases in demand for minerals. Exploration data have been used to identify specific sites where this investment has led to a significant contribution in global mineral supply of cobalt or where a significant increase in cobalt production capacity is anticipated in the next 5 years. This report provides an overview of the cobalt industry, factors affecting mineral supply, and circumstances surrounding the development, or lack thereof, of key mineral properties with the potential to affect mineral supply. Of the 48 sites with an effective production capacity of at least 1,000 metric tons per year of cobalt considered for this study, 3 producing sites underwent significant expansion during the study period, 10 exploration sites commenced production from 1995 through 2008, and 16 sites were expected to begin production by 2013 if planned development schedules are met. Cobalt supply is influenced by economic, environmental, political, and technological factors affecting exploration for and production of copper, nickel, and other metals as well as factors affecting the cobalt industry. Cobalt-rich nickel laterite deposits were discovered and developed in Australia and the South Pacific and improvements in laterite processing technology took place during the 1990s and early in the first decade of the 21st century when mining of copper-cobalt deposits in Congo (Kinshasa) was restricted because of regional conflict and lack of investment in that country's mining sector. There was also increased exploration for and greater importance placed on cobalt as a byproduct of nickel mining in Australia and Canada. The emergence of China as a major refined cobalt producer and consumer since 2007 has changed the pattern of demand for cobalt, particularly from Africa and Australasia. Chinese companies are increasingly becoming involved in copper and cobalt exploration and mining in Congo (Kinshasa) and Zambia as well as nickel, copper, and other mining in Australia and the South Pacific. Between 2009 and 2013, mines with a cumulative capacity of more than 100,000 metric tons per year of cobalt were proposed to come into production if all sites came into production as scheduled. This additional capacity corresponds to 175 percent of the 2008 global refinery production level. About 45 percent of this cobalt would be from primary nickel deposits, about 32 percent from primary copper deposits, and about 21 percent from primary cobalt deposits. By 2013, about 40 percent of new capacity was expected to come from the African Copperbelt; 38 percent, from Australia and the South Pacific countries of Philippines, Indonesia, New Caledonia, and Papua New Guinea; 11 percent, from other African countries; 5 percent, from North America; and 6 percent, from other areas.

Scientific Investigations Report↗
USGS2020

Environmental DNA: An emerging tool for understanding aquatic biodiversity

Field surveys for aquatic organisms provide critical information that is important for robust resource management. However, such surveys are expensive and labor intensive, particularly in large, remote landscapes like those that characterize much of Alaska. Traditionally, characterizing aquatic biodiversity necessitated the physical capture and identification of individual organisms, which required that field crews have some level of expertise in identifying the species likely to be present. Many other limitations of surveys that rely on direct observation of aquatic organisms have been noted (Evans and Lamberti 2018). However, what if it were possible to identify all of the species present at a site without having to capture or even see them? While we are not there yet, the recent revolution in environmental DNA (eDNA) technology is bringing us closer to that goal (Thomsen and Willerslev 2014).

Alaska↗
USGS2016

Endocrine-disrupting chemicals and oil and natural gas operations: Potential environmental contamination and recommendations to assess complex environmental mixtures

Background : Hydraulic fracturing technologies, developed over the last 65 years, have only recently been combined with horizontal drilling to unlock oil and gas reserves previously deemed inaccessible. While these technologies have dramatically increased domestic oil and natural gas production, they have also raised concerns for the potential contamination of local water supplies with the approximately 1,000 chemicals used throughout the process, including many known or suspected endocrine-disrupting chemicals. Objectives : We discuss the need for an endocrine component to health assessments for drilling-dense regions in the context of hormonal and anti-hormonal activities for chemicals used. Methods : We discuss the literature on 1) surface and ground water contamination by oil and gas extraction operations, and 2) potential human exposure, particularly in context of the total hormonal and anti-hormonal activities present in surface and ground water from natural and anthropogenic sources, with initial analytical results and critical knowledge gaps discussed. Discussion : In light of the potential for environmental release of oil and gas chemicals that can disrupt hormone receptor systems, we recommend methods for assessing complex hormonally active environmental mixtures. Conclusions : We describe a need for an endocrine-centric component for overall health assessments and provide supporting information that using this may help explain reported adverse health trends as well as help develop recommendations for environmental impact assessments and monitoring programs.

Environmental Health Perspectives↗
USGS2025

How accurately does eDNA reflect the spatial distribution of cold-water fish? Field validation from a temperate lake

Applications of environmental DNA (eDNA) based detection technology to evaluate the distribution of aquatic organisms are increasing; yet field validations of eDNA are important to measure accuracy in study systems. To successfully apply this technology to species conservation, it is critical to understand how both species biology and environmental conditions affect the accuracy of inference from eDNA detection data. We implemented a field assessment of the accuracy and spatial resolution of eDNA-based species distributions for a native cold-water, schooling fish, cisco Coregonus artedi , that has been reintroduced to a deep temperate lake. We leveraged a combination of acoustic telemetry, providing known spatial locations of tagged fish, and lake-wide eDNA sampling to infer their distribution in Keuka Lake, New York, USA. Sub-surface (12 m and 18 m depths) eDNA samples were collected to accommodate the diel vertical migration behaviour of this fish species. The results of this study validated the accuracy of positive eDNA detections with the distribution of tagged fish to coarse spatial scales. Yet, several fine-scale locations revealed a mismatch between eDNA and acoustic telemetry detections; consistent with rapid transport of genetic material via lake currents. Empirical measurements of lake currents using drifters found cisco eDNA detections could deviate from specimens' source locations by as much as 3.3 km at 12 m depth or 1.5 km at 18 m depth over a 24 h transport period. Our study indicates that accurate species distributions estimated from eDNA sampling in lakes may require further understanding of transport mechanisms and persistence of environmental genetic material to relate point detections to source animal locations. Integrating eDNA sampling with additional data collection of species biology and environmental conditions will increase the spatial resolution of fish distribution assessments.

New York↗
USGS2003

Spatial variability of sedimentary interbed properties near the Idaho Nuclear Technology and Engineering Center at the Idaho National Engineering and Environmental Laboratory, Idaho

The subsurface at the Idaho National Engineering and Environmental Laboratory (INEEL) is complex, comprised primarily of thick, fractured basalt flows interbedded with thinner sedimentary intervals. The unsaturated zone can be as thick as 200 m in the southwestern part of the INEEL. The Vadose Zone Research Park (VZRP), located approximately 10 km southwest of the Idaho Nuclear Technology and Engineering Center (INTEC), was established in 2001 to study the subsurface of a relatively undisturbed part of the INEEL. Waste percolation ponds for the INTEC were relocated to the VZRP due to concerns that perched water within the vadose zone under the original infiltration ponds (located immediately south of the INTEC) could contribute to migration of contaminants to the Snake River Plain aquifer. Knowledge of the spatial distribution of texture and hydraulic properties is important for developing a better understanding of subsurface flow processes within the interbeds, for example, by identifying low permeability layers that could lead to the formation of perched ground-water zones. Because particle-size distributions are easier to measure than hydraulic properties, particle size serves as an analog for determining how the unsaturated hydraulic properties vary both vertically within particular interbeds and laterally within the VZRP. As part of the characterization program for the subsurface at the VZRP, unsaturated and saturated hydraulic properties were measured on 10 core samples from six boreholes. Bulk properties, including particle size, bulk density, particle density, and specific surface area, were determined on material from the same depth intervals as the core samples, with an additional 66 particle- size distributions measured on bulk samples from the same boreholes. From lithologic logs of the 32 boreholes at the VZRP, three relatively thick interbeds (in places up to 10 m thick) were identified at depths of 35, 45, and 55 m below land surface. The 35-m interbed extends laterally over a distance of at least 900 m from the Big Lost River to the new percolation pond area of the VZRP. Most wells within the VZRP were drilled to depths less than 50 m, making it difficult to infer the lateral extent of the 45-m and 55-m interbeds. The 35-m interbed is uniform in texture both vertically and laterally; the 45-m interbed coarsens upward; and the 55-m interbed contains alternating coarse and fine layers. Seventy-one out of 90 samples were silt loams and 9 out of 90 samples were classified as either sandy loams, loamy sands, or sands. The coarsest samples were located within the 45-m and 55-m interbeds of borehole ICPP-SCI-V-215, located near the southeast corner of the new percolation pond area. At the tops of some interbeds, baked-zone intervals were identified by their oxidized color (yellowish red to red) compared to the color of the underlying non-baked material (pale yellow to brown). The average geometric mean particle diameter of baked-zone intervals was only slightly coarser, in some cases, than the underlying non-baked sediment. This is likely due to both depositional differences between the top and bottom of the interbeds and the presence of small basalt clasts in the sediment. Core sample hydraulic properties from baked zones within the different interbeds did not show effects from alteration caused during basalt deposition, but differed mainly by texture. Saturated hydraulic conductivities (Ksat) for the 10 core samples ranged from 10-7 to 10-4 cm/s. Low permeability layers, with Ksat values less than 10-7 cm/s, within the 35-m and 45-m interbeds may cause perched ground-water zones to form beneath the new percolation pond area, leading to the possible lateral movement of water away from the VZRP.

Idaho↗
USGS2018

Promoting synergy in the innovative use of environmental data—Workshop summary

From December 2 to 4, 2015, NatureServe and the U.S. Geological Survey organized and hosted a biodiversity and ecological informatics workshop at the U.S. Department of the Interior in Washington, D.C. The workshop objective was to identify user-driven future directions and areas of collaboration in advanced applications of environmental data applied to forecasting and decision making for the sustainability of biodiversity and ecosystem services. Substantial effort to recruit attendees from diverse Federal, State, and private sector organizations successfully attracted participants from 20 Federal agencies and 48 different institutions in the academic, nonprofit, State government, and commercial sectors; the total number of attendees ranged from 100 to 144 during the 3-day workshop. The first one-half of the workshop was divided into 7 plenary sessions and 3 sets of lightning talk sessions organized by sector, providing 48 oral and visual plenary presentations that shared diverse perspectives on biodiversity and ecological informatics, including original biospatial analyses from 6 graduate student map contest winners. The second one-half of the workshop focused on 10 breakout sessions with participant-driven themes from the environmental data sphere and concluded with an address by the Director of the U.S. Fish and Wildlife Service. The workshop was structured to encourage interactivity. About 80–90 percent of attendees provided direct feedback using clicker devices for specific questions related to biodiversity and ecological data uses and needs, and 10 breakout session leaders shared the highlights of their group discussions during the final workshop plenary sessions. Participants were encouraged to use the Twitter hashtag #ShareUrData. Over lunch on day 2 there were 20 simultaneous presentations of tools and apps during a special “Tools Café” session. The 10 participant-defined breakout session topics are listed below: Ecosystem services and ecological indicators Inventory and monitoring Biogeographic map of the Nation Pollinators Invasive species Remote sensing Drivers of agricultural change Citizen science Climate Hydrology and watersheds Numerous common themes that emerged from the workshop include the following: The vital importance of completing foundational environmental datasets that are nationally consistent and are essential to multiple sectors, such as the Soil Survey Geographic database high-resolution soils data, a minimum 5-meter resolution digital elevation model, national hydrographic data, high-resolution land cover data, time series high-resolution spatial climate data from historical to future time steps, and a national wetland inventory. Improved, nationally consistent environmental datasets (integrated with targeted observations) will dramatically advance forecasting capacity and support early warning systems (that is, drought, forest disease); however, multiagency coordination should focus on decision support tools that convey appropriate actions and responses to adapt to, and mitigate, potential negative consequences. Digitizing and providing access to the vast stores of underused historical data that can be leveraged for this purpose is of national importance. Modern computational techniques and the ever-increasing flow of environmental data from ground and remote observations can support improved understanding of environmental change. Success of understanding patterns of change for decision making requires establishing baselines from which change can be measured. The value of digitized historical data is greater than ever before. There is a need to recognize the multifaceted potential of citizen science to engage the public in resource stewardship, to create the next generation of science, technology, engineering, math, and environmental leaders, and to have sufficient field personnel to monitor environmental trends, including early detection of alien invasive species, phenological shifts, shifting distribution and abundance of indicator species, and species inventories. The Federal government has an essential role in creating the infrastructure to dramatically improve mobilization of citizen science (and other) data by fostering the following: creation of data standards, creation of nationally consistent framework datasets, vertical integration of observation data, visualization and dissemination of aggregated datasets, and calculation and communication of derived trends. Current and near future trends in the availability of remotely sensed data (rapid expansion of satellite fleets and drones) is revolutionizing access to near-real-time ecological data. Targeted integration with ground-based observations and instrumentation has an extremely valuable role in validating remotely sensed data, filling data gaps, improving data quality, and fully realizing the potential of the near-real-time monitoring of environmental indicator trends. Integrated management of environmental data at the landscape scale is required even as specific actions on the ground are largely local in nature. The workshop highlighted numerous success stories; however, almost every breakout group pointed out the still-too-fragmented nature of the current data landscape. Management and delivery of the necessary data, tools, and analyses to sustain our Nation’s environmental capital must be a collaborative effort between Federal, State, and local governments, academia, nonprofits, and the commercial sector, even though the responsibilities of each sector are different.

Open-File Report↗
USGS2025

Impact of thermoelectric power plant operations and water use reporting methods on thermoelectric power plant water use

Thermoelectric power generation accounts for over 41% of total U.S. freshwater withdrawals, making understanding the determinants of power plants’ water withdrawals (WW) and consumption (WC) critical for reducing the sector’s reliance on increasingly scarce water resources. However, reported data inconsistencies and incomplete analysis of potential determinants of thermoelectric water use hinder such understanding. We address these challenges by introducing a novel data filtering method and a more complete assessment of water use determinants. First, we applied a power-cooling ratio as an operations-based data filter that removed operationally implausible records while retaining more original data, outperforming previous statistical filtering methods. Second, we found that different water use reporting methods (WURMs) provided statistically significantly different WW and WC values, revealing the importance of this previously unrecognized feature in reported water use records. Third, our data-driven approach showed that traditionally emphasized features─such as cooling technology and gross generation─are of primary importance but can be surpassed by other, often overlooked, features when modeling WW or WC individually. The plant configuration, cooling technology, and gross generation were the most important features of WW, whereas WURM, cooling technology, and reporting month were the most important for WC. These findings can improve thermoelectric power plant management, water use reporting accuracy, and water use modeling.

Environmental Science & Technology↗
USGS2021

Earth Resources Observation and Science Center hosting services

The Earth Resources Observation and Science (EROS) Center has a long history of leveraging technology in support of Earth science and business applications including data management, processing, and virtualization and complex solutions to visualize and distribute data. It is the aim of EROS to offer operational excellence and service as a key component to the Federal Cloud-Smart directives and Department of the Interior data center consolidation goals. The EROS Center offers space, network, security, and environmental controls and information technology service management. Included with leveraging technology, the EROS Center has industry-leading staff to assist with supporting Earth science and business applications.

Fact Sheet↗
USGS2006

Toxicogenomics in regulatory ecotoxicology

Recently, we have witnessed an explosion of different genomic approaches that, through a combination of advanced biological, instrumental, and bioinformatic techniques, can yield a previously unparalleled amount of data concerning the molecular and biochemical status of organisms. Fueled partially by large, well-publicized efforts such as the Human Genome Project, genomic research has become a rapidly growing topical area in multiple biological disciplines. Since 1999, when the term “toxicogenomics” was coined to describe the application of genomics to toxicology (1), a rapid increase in publications on the topic has occurred (Figure 1). The potential utility of toxicogenomics in toxicological research and regulatory activities has been the subject of scientific discussions and, as with any new technology, has evoked a wide range of opinion (2–6).

Environmental Science & Technology↗