Search USGS⌕ Search

SEARCH · Search USGS

Results for “Energy and Fuels”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2018

Application of Raman spectroscopy as thermal maturity probe in shale petroleum systems: Insights from natural and artificial maturation series

Raman spectroscopy was studied as a thermal maturity probe in a series of Upper Devonian Ohio Shale samples from the Appalachian Basin spanning from immature to dry gas conditions. Raman spectroscopy also was applied to samples spanning a similar thermal range created from 72-h hydrous pyrolysis (HP) experiments of the Ohio Shale at temperatures from 300 to 360 °C and isothermal HP experiments lasting up to 100 days of similar Devonian–Mississippian New Albany Shale. Raman spectra were treated by automated evaluation software based on iterative and simultaneous modeling of signal and baseline functions to decrease subjectivity. Spectra show robust correlation to measured solid bitumen reflectance (BR o ) values and were therefore used to construct logarithmic regression relationships for calculation of BR o equivalent values. Raman spectra show considerable differences between natural samples and HP residues with similar measured BR o values, indicating as-yet undetermined differences in carbon chemistry. We speculate this result may be due to differences in the sampling interactions of Raman vs reflectance measurements, and the incomplete nature of maturation reactions in the time-limited hydrous pyrolysis residues. Samples used in this study are similar in organic assemblage (dominantly solid bitumen) to other commonly exploited North American shale petroleum systems, i.e., Bakken, Barnett, Duvernay, Fayetteville, and Woodford shales. Therefore, results presented herein may be broadly applicable to other important shale plays. However, caution is suggested and Raman spectroscopy as a thermal probe may need individual calibration in each shale play due to differences in solid bitumen carbon chemistry.

Energy & Fuels↗
USGS2019

Experimental study on the impact of thermal maturity on shale microstructures using hydrous pyrolysis

Hydrous pyrolysis was applied to four low-maturity aliquots from the Utica, Excello, Monterey, and Niobrara Shale Formations in North America to create artificial maturation sequences, which could be used to study the impact of maturation on geochemical and microstructural properties. Modified Rock-Eval pyrolysis, reflectance, organic petrology, and Fourier transform infrared spectroscopy (FTIR) were employed to analyze their geochemical properties, while gas adsorption (CO 2 and N 2 ) was used to characterize their pore structures (pores < 200 nm). Organic petrography using white and blue light (fluorescence) before and after hydrous pyrolysis showed that amorphous organic matter cracked into solid bitumen, oil, and gas during hydrous pyrolysis. A reduction of the CH 2 /CH 3 ratio in hydrous pyrolysis residues was observed from FTIR analysis. Rock-Eval pyrolysis showed that kerogens in the four samples were dissimilar, and hydrous pyrolysis residues showed smaller hydrogen index and Sh2 values than starting materials. Results from CO 2 and N 2 gas adsorption analysis showed that pore structures (micropore volume, micropore surface area, meso-macropore volume, and meso-macropore surface area) changed significantly during hydrous pyrolysis. However, changes in pore structure were dissimilar among the four samples, which was attributed to different activation energies of organic matter. A thermodynamic fractal model showed a decrease in fractal dimensions of Utica, Monterey, and Excello after hydrous pyrolysis, indicating a decrease in surface roughness. The pore size heterogeneity in the Utica sample increased as hydrous pyrolysis temperature increased, whereas the pore size heterogeneity distributions in the Monterey and Excello decreased based on the N 2 adsorption data.

Energy & Fuels↗
USGS2020

Impacts of mineralogical variation on CO2 behavior in small pores from producing intervals of the Marcellus Shale: Results from neutron scattering

The Near and InterMediate Range Order Diffractometer (NIMROD) was used to examine the potential impact of shale mineralogy on CO 2 behavior within micropores. Two samples with varying mineral compositions were obtained from producing intervals in the dry gas window in the Middle Devonian Marcellus Shale. One of the samples contained relatively high amounts of quartz and clay and low carbonate, the other contained relatively equal amounts of quartz, carbonate, and clay. The samples were probed with CO 2 at subcritical pressures (20–50 bar) and temperature (22 °C) and characterized over a neutron scattering vector ( Q ) range of 0.02 < Q < 50 Å –1 . This Q range provides information from the atomistic length-scale up to pore radii of 10 nm. Mineralogy variations between the samples did not affect scattering ratios over the entire Q range accessible with the NIMROD. Q values for the minimum scattering ratios of both samples at similar pressures are remarkably similar, particularly for Q < ∼0.09 Å –1 , and maximum scattering ratios are similar in both samples suggesting that mineral pores are so uncommon in the pore sizes examined that they cannot be resolved due to the overwhelming amounts of organic pores in these samples. Overall, these findings suggest that mineralogical variations have little effect on CO 2 behavior within organic matter-hosted shale micropores at high thermal maturities and they lend support to the assertion that CO 2 cannot be stored in the vast surface areas of micropores in organic material in shale formations. In addition, CO 2 enhanced oil recovery (EOR) is unlikely to displace petroleum from some of the smaller mesopores (2.5 to ∼3.5 nm) and all of the micropores because they are effectively closed to CO 2 . amples were probed with CO2 at subcritical pressures (20 50 bar) and temperature (22 oC) and characterized over a neutron scattering vector (Q) range of 0.02 < Q < 50 -1. This Q range provides information on nominal pore size radii of around 10 0.5 nm. Mineralogy variations between the samples did not affect scattering ratios over the entire Q range accessible with the NIMROD. Q values for the minimum scattering ratios of both samples at similar pressures are statistically indistinguishable and maximum scattering ratios are similar in both samples suggesting that mineral pores are either absent or are so uncommon that they cannot be resolved due to the overwhelming amounts of organic pores in these samples. Overall, these findings suggest that mineralogical variations have little effect on CO2 behavior within organic matter-hosted shale micropores at high thermal maturities and they lend support to the assertion that CO2 cannot be stored in the vast surface areas of micropores (<2.5 nm) in shale formations. In addition, CO2 enhanced oil recovery (EOR) is unlikely to displace petroleum from some of the smaller mesopores (2.5 10 nm) and all of the micropores because they are effectively closed to CO2.

Energy & Fuels↗
USGS2002

Dipolar-dephasing 13C NMR studies of decomposed wood and coalified xylem tissue: Evidence for chemical structural changes associated with defunctionalization of lignin structural units during coalification

A series of decomposed and coalified gymnosperm woods was examined by conventional solid-state 13C nuclear magnetic resonance (NMR) and by dipolar-dephasing NMR techniques. The results of these NMR studies for a histologically related series of samples provide clues as to the nature of codification reactions that lead to the defunctionalization of lignin-derived aromatic structures. These reactions sequentially involve the following: (1) loss of methoxyl carbons from guaiacyl structural units with replacement by hydroxyls and increased condensation; (2) loss of hydroxyls or aryl ethers with replacement by hydrogen as rank increases from lignin to high-volatile bituminous coal; (3) loss of alkyl groups with continued replacement by hydrogen. The dipolar-dephasing data show that the early stages of coalification in samples examined (lignin to lignite) involve a decreasing degree of protonation on aromatic rings and suggest that condensation is significant during coalification at this early stage. An increasing degree of protonation on aromatic rings is observed as the rank of the sample increases from lignite to anthracite.

Energy & Fuels↗
USGS2002

Molecular composition and mobility of torbanite precursors: Implications for the structure of coal

Coorongite, a torbanite precursor found in South Australia, and algal residues derived from Botryococcus braunii and other algae have been examined by solid-state 13C NMR techniques. The majority of carbon in these materials is present as (CH2)n. However, variable-temperature studies show that a considerable proportion of the alkyl chains have unusual dipolar-dephasing behavior and are more mobile than in rigid solids. It is suggested that these mobile structures contribute to the so-called "guest phases" in coal. The data are also consistent with a vascular and algal model of coal. ?? 1988 American Chemical Society.

Energy & Fuels↗
USGS2002

Determination of selected elements in whole coal and in coal ash from the eight argonne premium coal samples by atomic absorption spectrometry, atomic emission spectrometry, and ion-selective electrode

Methods for the determination of 24 elements in whole coal and coal ash by inductively coupled argon plasma-atomic emission spectrometry, flame, graphite furnace, and cold vapor atomic absorption spectrometry, and by ion-selective electrode are described. Coal ashes were analyzed in triplicate to determine the precision of the methods. Results of the analyses of NBS Standard Reference Materials 1633, 1633a, 1632a, and 1635 are reported. Accuracy of the methods is determined by comparison of the analysis of standard reference materials to their certified values as well as other values in the literature.

Energy & Fuels↗
USGS2002

Determination of twenty-nine elements in eight argonne premium coal samples by instrumental neutron activation analysis

Twenty-nine elements have been determined in triplicate splits of the eight Argonne National Laboratory Premium Coal Samples by instrumental neutron activtaion analysis. Data for control samples NBS 1633 (fly ash) and NBS 1632b are also reported. The factors that could lead to errors in analysis for these samples, such as spectral overlaps, low sensitivity, and interfering nuclear reactions, are discussed.

Energy & Fuels↗
USGS2002

Analysis of eight argonne premium coal samples by X-ray fluorescence spectrometry

X-ray fluorescence spectrometric methods were used in the analysis of eight Argonne Premium Coal Samples. Trace elements (Cr, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, La, and Ce) in coal ash were determined by energy-dispersive X-ray fluorescence spectrometry; major elements (Na, Mg, Al, Si, P, S, K, Ca, Ti, Mn, and Fe) in coal ash and trace elements (Cl and P) in whole coal were determined by wavelength-dispersive X-ray fluorescence spectrometry. The results of this study will be used in a geochemical database compiled for these materials from various analytical techniques. The experimental XRF methods and procedures used to determine these major and trace elements are described.

Energy & Fuels↗
USGS2002

Controls on porphyrin concentrations of Pennsylvanian organic-rich shales, Western U.S.A.

Organic-rich black shales of Middle Pennsylvanian (Desmoinesian) age occur over much of the central U.S. and as far west as the northern Denver and southeastern Powder River basins. Total organic carbon contents (Corg) are commonly greater than 10 wt %. Porphyrin concentrations (vanadyl + nickel) are as high as 40000 ppm relative to extractable bitumen. In bulk, the organic matter contained in the shales is mostly type II and III (Rock-Eval hydrogen indexes 200-400 mg of hydrocarbons/g of Corg). The finding of high porphyrin concentrations in type III organic matter is unusual but can be explained by a depositional model wherein high preservation of primary organic production (water column photosynthesis) is combined with substantial input of allochthonous organic matter. The allochthonous organic matter (low porphyrin concentration) may come from erosion during advance of the sea across the area or from fluvial transport from shore.

Energy & Fuels↗
USGS2002

Combustion and leaching behavior of elements in the argonne premium coal samples

Eight Argonne Premium Coal samples and two other coal samples were used to observe the effects of combustion and leaching on 30 elements. The results were used to infer the modes of occurrence of these elements. Instrumental neutron activation analysis indicates that the effects of combustion and leaching on many elements varied markedly among the samples. As much as 90% of the selenium and bromine is volatilized from the bituminous coal samples, but substantially less is volatilized from the low-rank coals. We interpret the combustion and leaching behavior of these elements to indicate that they are associated with the organic fraction. Sodium, although nonvolatile, is ion-exchangeable in most samples, particularly in the low-rank coal samples where it is likely to be associated with the organic constituents. Potassium is primarily in an ion-exchangeable form in the Wypdak coal but is in HF-soluble phases (probably silicates) in most other samples. Cesium is in an unidentified HNO3-soluble phase in most samples. Virtually all the strontium and barium in the low-rank coal samples is removed by NH4OAc followed by HCl, indicating that these elements probably occur in both organic and inorganic phases. Most tungsten and tantalum are in insoluble phases, perhaps as oxides or in organic association. Hafnium is generally insoluble, but as much as 65% is HF soluble, perhaps due to the presence of very fine grained or metamict zircon. We interpret the leaching behavior of uranium to indicate its occurrence in chelates and its association with silicates and with zircon. Most of the rare-earth elements (REE) and thorium appear to be associated with phosphates. Differences in textural relationships may account for some of the differences in leaching behavior of the REE among samples. Zinc occurs predominantly in sphalerite. Either the remaining elements occur in several different modes of occurrence (scandium, iron), or the leaching data are equivocal (arsenic, antimony, chromium, cobalt, and nickel). The results of these combustion and leaching experiments indicate that some previously held assumptions concerning modes of occurrence of elements in coal should be reconsidered.

Energy & Fuels↗
USGS2002

An unusual occurrence of arsenic-bearing pyrite in the Upper Freeport coal bed, West-Central Pennsylvania

Scanning electron microscopy and electron microprobe analysis were used to identify a rare type of As-bearing pyrite in selected specific gravity separates from the Pennsylvanian age Upper Freeport coal bed, west-central Pennsylvania. Arsenic was detected mainly in cell-wall replacement pyrite where concentrations ranged from nondetectable to 1.9 wt %. Although the majority of arsenic-bearing pyrite in the Upper Freeport coal bed is concentrated in massive and late diagenetic pyrite morphologies, the rarer As-bearing cell-replacement pyrite was observed in both light and heavy gravity separates from the three coal facies examined. Arsenic was occasionally detected in cell-filling replacement pyrite, but this As appears to be an artifact produced by signals from underlying and/or adjacent As-bearing cell-wall replacement pyrite. It is postulated that some plants of the Upper Freeport paleoswamp may have biomethylated As, which later could have been converted to dimethylarsine or other volatile organoarsenic compounds by either biologically or chemically driven processes. Once liberated, the arsenic may have been incorporated into pyrite during pyritization of the cell walls. The As incorporation occurred early, before significant compaction of the peat, because the pyritized cell walls are not compacted.

Pennsylvania↗
USGS2012

Molecular characterization and comparison of shale oils generated by different pyrolysis methods

Shale oils generated using different laboratory pyrolysis methods have been studied using standard oil characterization methods as well as Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) with electrospray ionization (ESI) and atmospheric photoionization (APPI) to assess differences in molecular composition. The pyrolysis oils were generated from samples of the Mahogany zone oil shale of the Eocene Green River Formation collected from outcrops in the Piceance Basin, Colorado, using three pyrolysis systems under conditions relevant to surface and in situ retorting approaches. Significant variations were observed in the shale oils, particularly the degree of conjugation of the constituent molecules and the distribution of nitrogen-containing compound classes. Comparison of FT-ICR MS results to other oil characteristics, such as specific gravity; saturate, aromatic, resin, asphaltene (SARA) distribution; and carbon number distribution determined by gas chromatography, indicated correspondence between higher average double bond equivalence (DBE) values and increasing asphaltene content. The results show that, based on the shale oil DBE distributions, highly conjugated species are enriched in samples produced under low pressure, high temperature conditions, and under high pressure, moderate temperature conditions in the presence of water. We also report, for the first time in any petroleum-like substance, the presence of N 4 class compounds based on FT-ICR MS data. Using double bond equivalence and carbon number distributions, structures for the N 4 class and other nitrogen-containing compounds are proposed.

Energy & Fuels↗
USGS2012

Comparing Laser Desorption Ionization and Atmospheric Pressure Photoionization Coupled to Fourier Transform Ion Cyclotron Resonance Mass Spectrometry To Characterize Shale Oils at the Molecular Level

Laser desorption ionization (LDI) coupled to Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used to analyze shale oils. Previous work showed that LDI is a sensitive ionization technique for assessing aromatic nitrogen compounds, and oils generated from Green River Formation oil shales are well-documented as being rich in nitrogen. The data presented here demonstrate that LDI is effective in ionizing high-double-bond-equivalent (DBE) compounds and, therefore, is a suitable method for characterizing compounds with condensed structures. Additionally, LDI generates radical cations and protonated ions concurrently, the distribution of which depends upon the molecular structures and elemental compositions, and the basicity of compounds is closely related to the generation of protonated ions. This study demonstrates that LDI FT-ICR MS is an effective ionization technique for use in the study of shale oils at the molecular level. To the best of our knowledge, this is the first time that LDI FT-ICR MS has been applied to shale oils.

Energy & Fuels↗
USGS2013

A USANS/SANS study of the accessibility of pores in the Barnett Shale to methane and water

Shale is an increasingly important source of natural gas in the United States. The gas is held in fine pores that need to be accessed by horizontal drilling and hydrofracturing techniques. Understanding the nature of the pores may provide clues to making gas extraction more efficient. We have investigated two Mississippian Barnett Shale samples, combining small-angle neutron scattering (SANS) and ultrasmall-angle neutron scattering (USANS) to determine the pore size distribution of the shale over the size range 10 nm to 10 μm. By adding deuterated methane (CD 4 ) and, separately, deuterated water (D 2 O) to the shale, we have identified the fraction of pores that are accessible to these compounds over this size range. The total pore size distribution is essentially identical for the two samples. At pore sizes >250 nm, >85% of the pores in both samples are accessible to both CD 4 and D 2 O. However, differences in accessibility to CD 4 are observed in the smaller pore sizes (~25 nm). In one sample, CD 4 penetrated the smallest pores as effectively as it did the larger ones. In the other sample, less than 70% of the smallest pores (<25 nm) were accessible to CD 4 , but they were still largely penetrable by water, suggesting that small-scale heterogeneities in methane accessibility occur in the shale samples even though the total porosity does not differ. An additional study investigating the dependence of scattered intensity with pressure of CD 4 allows for an accurate estimation of the pressure at which the scattered intensity is at a minimum. This study provides information about the composition of the material immediately surrounding the pores. Most of the accessible (open) pores in the 25 nm size range can be associated with either mineral matter or high reflectance organic material. However, a complementary scanning electron microscopy investigation shows that most of the pores in these shale samples are contained in the organic components. The neutron scattering results indicate that the pores are not equally proportioned in the different constituents within the shale. There is some indication from the SANS results that the composition of the pore-containing material varies with pore size; the pore size distribution associated with mineral matter is different from that associated with organic phases.

Texas↗
USGS2015

Qualitative and quantitative analysis of Dibenzofuran, Alkyldibenzofurans, and Benzo[b]naphthofurans in crude oils and source rock extracts

Dibenzofuran (DBF), its alkylated homologues, and benzo[b]naphthofurans (BNFs) are common oxygen-heterocyclic aromatic compounds in crude oils and source rock extracts. A series of positional isomers of alkyldibenzofuran and benzo[b]naphthofuran were identified in mass chromatograms by comparison with internal standards and standard retention indices. The response factors of dibenzofuran in relation to internal standards were obtained by gas chromatography-mass spectrometry analyses of a set of mixed solutions with different concentration ratios. Perdeuterated dibenzofuran and dibenzothiophene are optimal internal standards for quantitative analyses of furan compounds in crude oils and source rock extracts. The average concentration of the total DBFs in oils derived from siliciclastic lacustrine rock extracts from the Beibuwan Basin, South China Sea, was 518 &mu;g/g, which is about 5 times that observed in the oils from carbonate source rocks in the Tarim Basin, Northwest China. The BNFs occur ubiquitously in source rock extracts and related oils of various origins. The results of this work suggest that the relative abundance of benzo[b]naphthofuran isomers, that is, the benzo[b]naphtho[2,1-d]furan/{benzo[b]naphtho[2,1-d]furan + benzo[b]naphtho[1,2-d]furan} ratio, may be a potential molecular geochemical parameter to indicate oil migration pathways and distances.

Energy & Fuels↗
USGS2015

Using ground and intact coal Samples to evaluate hydrocarbon fate during supercritical CO 2 injection into coal beds: effects of particle size and coal moisture

To investigate the potential for mobilizing organic compounds from coal beds during geologic carbon dioxide (CO 2 ) storage (sequestration), a series of solvent extractions using dichloromethane (DCM) and using supercritical CO 2 (40 &deg;C and 10 MPa) were conducted on a set of coal samples collected from Louisiana and Ohio. The coal samples studied range in rank from lignite A to high volatile A bituminous, and were characterized using proximate, ultimate, organic petrography, and sorption isotherm analyses. Sorption isotherm analyses of gaseous CO 2 and methane show a general increase in gas storage capacity with coal rank, consistent with findings from previous studies. In the solvent extractions, both dry, ground coal samples and moist, intact core plug samples were used to evaluate effects of variations in particle size and moisture content. Samples were spiked with perdeuterated surrogate compounds prior to extraction, and extracts were analyzed via gas chromatography&ndash;mass spectrometry. The DCM extracts generally contained the highest concentrations of organic compounds, indicating the existence of additional hydrocarbons within the coal matrix that were not mobilized during supercritical CO 2 extractions. Concentrations of aliphatic and aromatic compounds measured in supercritical CO 2 extracts of core plug samples generally are lower than concentrations in corresponding extracts of dry, ground coal samples, due to differences in particle size and moisture content. Changes in the amount of extracted compounds and in surrogate recovery measured during consecutive supercritical CO 2 extractions of core plug samples appear to reflect the transition from a water-wet to a CO 2 -wet system. Changes in coal core plug mass during supercritical CO 2 extraction range from 3.4% to 14%, indicating that a substantial portion of coal moisture is retained in the low-rank coal samples. Moisture retention within core plug samples, especially in low-rank coals, appears to inhibit accessibility of supercritical CO 2 to coal matrix porosity, limiting the extent to which hydrocarbons are mobilized. Conversely, the enhanced recovery of some surrogates from core plugs relative to dry, ground coal samples might indicate that, once mobilized, supercritical CO 2 is capable of transporting these constituents through coal beds. These results underscore the need for using intact coal samples, and for better characterization of forms of water in coal, to understand fate and transport of organic compounds during supercritical CO 2 injection into coal beds.

Energy & Fuels↗