Search USGS⌕ Search

SEARCH · Search USGS

Results for “Detailed procedure”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

Operator's manual on the visual-accumulation tube method for sedimentation analysis of sands

The visual-tube method for sedimentation analysis of sands was developed as a part of the general investigation titled "A Study of Methods Used in Measurement and Analysis of Sediment Loads in Streams." The method is one answer to the need for a simple, rapid, and inexpensive means of determining the sedimentation-size frequency analysis of sand samples containing particles less than one millimeter in size. For analysis of coarser sands see the Appendix, Section 13, Report No. 11 "The Development and Calibration of the Visual-Accumulation-Tube" is available for those who have further interest in this analysis. The personnel who will be operating these units may have little or no previous knowledge of either the principles involved or the details of opera.ting procedure. This manual is intended as an aid to them in setting up the apparatus, learning the analytical procedure, interpreting the results, and understanding the primary principles encountered.

Report↗

Water quality monitoring protocol for wadeable streams and rivers in the Northern Great Plains Network

Preserving the national parks unimpaired for the enjoyment of future generations is a fundamental purpose of the National Park Service (NPS). To address growing concerns regarding the overall physical, chemical, and biological elements and processes of park ecosystems, the NPS implemented science-based management through “Vital Signs” monitoring in 270 national parks (NPS 2007). The Northern Great Plains Network (NGPN) is among the 32 National Park Service Networks participating in this monitoring effort. The NGPN will develop protocols over the next several years to determine the overall health or condition of resources within 13 parks located in Nebraska, North Dakota, South Dakota, and Wyoming. The NGPN identified water resources as a Vital Sign to monitor because water quality and quantity are important aspects of ecological processes that operate across multiple temporal and spatial scales. In the semi-arid region of the Northern Great Plains, surface-water resources within the NGPN are ecologically important. The 13 parks within the NGPN are diverse and vary greatly in size, visitation, and water resources. For example, the measured surface area of the Badlands National Park is about 243,000 acres, which represents nearly one-half of the combined acreage of all 13 NGPN park units; however, water resources within the park are scarce and the majority of streams are intermittent. The Badlands National Park annually hosts nearly 860,000 visitors. Mount Rushmore National Memorial also has limited water resources but hosts nearly 3 million visitors per year within its 1,278 acres. The Missouri National Recreational River contains the greatest portion of waterbodies within the NGPN, consisting of 139 rivers and streams within an areal extent of about 69,000 acres. Although water resources and acreage of the NGPN parks are varied, unifying factors among the parks include the relatively low population density within the Great Plains area and the strong emphasis on agrarian land use throughout the region. To address the diverse water quality concerns, NGPN received input from park staff and conducted pilot studies in 2009 and 2010. These factors, in combination with the NGPN budget allocations, resulted in development of the NGPN’s water quality monitoring protocol. This protocol will provide a context to aid park resource managers in their day-to-day decisions and allow the assessment of the status (current conditions) and trends (directional changes across time) of streams/rivers within selected NGPN parks. Data collected from integrating water resource monitoring, in combination with the inventory of additional Vital Signs, can be used to assess resources and to aid in sound managerial decisions by the NGPN parks. As recommended by Oakley et al. (2003), this protocol provides a narrative and the rationale for selection of streams and rivers within the NGPN that will be measured for water quality, including dissolved oxygen, pH, specific conductivity, and temperature. Standard operating procedures (SOPs) that detail the steps to collect, manage, and disseminate the NGPN water quality data are in an accompanying document. The sampling design documented in this protocol may be updated as monitoring information is collected and interpreted, and as refinement of methodologies develop through time. In addition, evaluation of data and refinement of the program may necessitate potential changes of program objectives. Changes to the NGPN water quality protocols and SOPs will be carefully documented in a revision history log.

Colorado, Montana, Nebraska, North Dakota, South D↗

Geospatial standard operating procedures of the Chesapeake Bay Program

Introduction The Chesapeake Bay Program (CBP) has operated a geographic information system (GIS) program since the early 1990s to address the established and growing need for and use of geospatial data, maps, and analysis within the CBP Partnership. This report is intended to detail the standard operating procedures of the CBP GIS program and address the quality assurance, quality control, and other technical activities that CBP will implement to ensure the commitment of the CBP GIS Team to performance standards (U.S. Environmental Protection Agency, 2003). The report is intended as an update to the 2011 Quality Assurance Project Plan (QAPP). For specialized tasks or analytical projects beyond the scope of this QAPP, a separate specialized QAPP with details on quality control, assurance procedures, and the geospatial methods associated with all aspects of the project may be required.

Open-File Report↗

Measuring and monitoring biological diversity: Standard methods for amphibians

Measuring and Monitoring Biological Diversity is the first book to provide comprehensive coverage of standard methods for biodiversity sampling of amphibians, with information on analyzing and using data that will interest biologists in general. In this manual, nearly fifty herpetologists recommend ten standard sampling procedures for measuring and monitoring amphibian and many other populations. The contributors discuss each procedure, along with the circumstances for its appropriate use. In addition, they provide a detailed protocol for each procedure's implementation, a list of necessary equipment and personnel, and suggestions for analyzing the data. The data obtained using these standard methods are comparable across sites and through time and, as a result, are extremely useful for making decisions about habitat protection, sustained use, and restoration—decisions that are particularly relevant for threatened amphibian populations.

Book↗

A Procedure for the supercritical fluid extraction of coal samples, with subsequent analysis of extracted hydrocarbons

Introduction: This report provides a detailed, step-by-step procedure for conducting extractions with supercritical carbon dioxide (CO2) using the ISCO SFX220 supercritical fluid extraction system. Protocols for the subsequent separation and analysis of extracted hydrocarbons are also included in this report. These procedures were developed under the auspices of the project 'Assessment of Geologic Reservoirs for Carbon Dioxide Sequestration' (see http://pubs.usgs.gov/fs/fs026-03/fs026-03.pdf) to investigate possible environmental ramifications associated with CO2 storage (sequestration) in geologic reservoirs, such as deep (~1 km below land surface) coal beds. Supercritical CO2 has been used previously to extract contaminants from geologic matrices. Pressure-temperature conditions within deep coal beds may render CO2 supercritical. In this context, the ability of supercritical CO2 to extract contaminants from geologic materials may serve to mobilize noxious compounds from coal, possibly complicating storage efforts. There currently exists little information on the physicochemical interactions between supercritical CO2 and coal in this setting. The procedures described herein were developed to improve the understanding of these interactions and provide insight into the fate of CO2 and contaminants during simulated CO2 injections.

Open-File Report↗

Computation of continuous records of streamflow

Records of continuous streamflow, published in the U.S. Geological Survey annual Water Data Reports for the States and territories, are computed from field data, mainly discharge measurements and recorder charts or tapes. This manual describes the computation procedures used and some details of related field operations. It was compiled mostly from unpublished Water Resource Division district manuals edited and supplemented to emphasize digital-recorder and associated computer use. Methods used primarily for graphic-recorder gaging stations and non-recording gages are also included. Reference is made to other publications for some of the more specialized or unusually complex procedures.

Techniques of Water-Resources Investigations↗

A procedure for radiometric recalibration of Landsat 5 TM reflective-band data

From the Landsat program's inception in 1972 to the present, the Earth science user community has been benefiting from a historical record of remotely sensed data. The multispectral data from the Landsat 5 (L5) Thematic Mapper (TM) sensor provide the backbone for this extensive archive. Historically, the radiometric calibration procedure for the L5 TM imagery used the detectors' response to the internal calibrator (IC) on a scene-by-scene basis to determine the gain and offset for each detector. The IC system degraded with time, causing radiometric calibration errors up to 20%. In May 2003, the L5 TM data processed and distributed by the U.S. Geological Survey (USGS) Earth Resources Observation and Science Center through the National Landsat Archive Production System (NLAPS) were updated to use a lifetime lookup-table (LUT) gain model to radiometrically calibrate TM data instead of using scene-specific IC gains. Further modification of the gain model was performed in 2007. The L5 TM data processed using IC prior to the calibration update do not benefit from the recent calibration revisions. A procedure has been developed to give users the ability to recalibrate their existing level-1 products. The best recalibration results are obtained if the work-order report that was included in the original standard data product delivery is available. However, if users do not have the original work-order report, the IC trends can be used for recalibration. The IC trends were generated using the radiometric gain trends recorded in the NLAPS database. This paper provides the details of the recalibration procedure for the following: 1) data processed using IC where users have the work-order file; 2) data processed using IC where users do not have the work-order file; 3) data processed using prelaunch calibration parameters; and 4) data processed using the previous version of the LUT (e.g., LUT03) that was released before April 2, 2007.

IEEE Transactions on Geoscience and Remote Sensing↗

Professional conduct of scientists during volcanic crises

Stress during volcanic crises is high, and any friction between scientists can distract seriously from both humanitarian and scientific effort. Friction can arise, for example, if team members do not share all of their data, if differences in scientific interpretation erupt into public controversy, or if one scientist begins work on a prime research topic while a colleague with longer-standing investment is still busy with public safety work. Some problems arise within existing scientific teams; others are brought on by visiting scientists. Friction can also arise between volcanologists and public officials. Two general measures may avert or reduce friction: (a) National volcanologic surveys and other scientific groups that advise civil authorities in times of volcanic crisis should prepare, in advance of crises, a written plan that details crisis team policies, procedures, leadership and other roles of team members, and other matters pertinent to crisis conduct. A copy of this plan should be given to all current and prospective team members. (b) Each participant in a crisis team should examine his or her own actions and contribution to the crisis effort. A personal checklist is provided to aid this examination. Questions fall generally in two categories: Are my presence and actions for the public good? Are my words and actions collegial, i.e., courteous, respectful, and fair? Numerous specific solutions to common crisis problems are also offered. Among these suggestions are: (a) choose scientific team leaders primarily for their leadership skills; (b) speak publicly with a single scientific voice, especially when forecasts, warnings, or scientific disagreements are involved; (c) if you are a would-be visitor, inquire from the primary scientific team whether your help would be welcomed, and, in general, proceed only if the reply is genuinely positive; (d) in publications, personnel evaluations, and funding, reward rather than discourage teamwork. Models are available from the fields of particle physics and human genetics, among others.

Bulletin of Volcanology↗

Population trends of North American shorebirds based on the International Shorebird Survey

Shorebirds Charadrii are prime candidates for population decline because of their dependence on wetlands that are being lost at a rapid pace. Thirty-six of the 49 species of shorebirds that breed in North America spend most of the year in Latin America. Because populations of most species breed and winter at remote sites, it may be most feasible to monitor their numbers at migration stopovers. In this study, we used statistical trend analysis methods, developed for the North America Breeding Bird Survey, to analyze data on shorebird populations during southbound migration in the United States. Survey data were collected by volunteers in the International Shorebird Survey (ISS). The analyses indicate that whimbrels Numenius phaeopus , short-billed dowitchers Limnodromus griseus , and sanderlings Calidris alba have undergone statistically significant declines. Methodological concerns over both the ISS and the trend analysis procedures are discussed in detail and biological interpretations of the results are suggested.

Biological Conservation↗

Modelling effects of chemical exposure on birds wintering in agricultural landscapes: The western burrowing owl ( Athene cunicularia hypugaea ) as a case study

We describe an ecotoxicological model that simulates the sublethal and lethal effects of chronic, low-level, chemical exposure on birds wintering in agricultural landscapes. Previous models estimating the impact on wildlife of chemicals used in agro-ecosystems typically have not included the variety of pathways, including both dermal and oral, by which individuals are exposed. The present model contains four submodels simulating (1) foraging behavior of individual birds, (2) chemical applications to crops, (3) transfers of chemicals among soil, insects, and small mammals, and (4) transfers of chemicals to birds via ingestion and dermal exposure. We demonstrate use of the model by simulating the impacts of a variety of commonly used herbicides, insecticides, growth regulators, and defoliants on western burrowing owls ( Athene cunicularia hypugaea ) that winter in agricultural landscapes in southern Texas, United States. The model generated reasonable movement patterns for each chemical through soil, water, insects, and rodents, as well as into the owl via consumption and dermal absorption. Sensitivity analysis suggested model predictions were sensitive to uncertainty associated with estimates of chemical half-lives in birds, soil, and prey, sensitive to parameters associated with estimating dermal exposure, and relatively insensitive to uncertainty associated with details of chemical application procedures (timing of application, amount of drift). Nonetheless, the general trends in chemical accumulations and the relative impacts of the various chemicals were robust to these parameter changes. Simulation results suggested that insecticides posed a greater potential risk to owls of both sublethal and lethal effects than do herbicides, defoliants, and growth regulators under crop scenarios typical of southern Texas, and that use of multiple indicators, or endpoints provided a more accurate assessment of risk due to agricultural chemical exposure. The model should prove useful in helping prioritize the chemicals and transfer pathways targeted in future studies and also, as these new data become available, in assessing the relative danger to other birds of exposure to different types of agricultural chemicals.

Texas↗

Rewetting approximation for a simulator of flow in a surficial aquifer overlain by seasonally inundated wetlands

An approximation is presented to rectify situations occurring as part of the three-dimensional simulation of surficial aquifer flows in which surface grid cells become dry (zero saturated thickness) and then cannot readily receive flows that would again partially saturate them. The approximation permits the cells to be rewetted by adjusting dry cell pressures by the same amount as the pressure change computed for the uppermost nondry cells in the vertical column. This is continued in successive timesteps until the dry cells once again become partially or fully saturated. The rewetting procedure was tested in a recent transient simulation of flows in the surficial Biscayne aquifer of Dade County, Florida, which is partly covered by seasonally inundated wetlands. The uppermost layer of the model (layer 1) was used to represent overland sheetflow and grid cells of high equivalent hydraulic conductivity in this layer became dry and were rewetted seasonally, requiring a relatively robust representation of rewetting. The rewetting procedure made possible a simulation of overland sheetflow stages and aquifer water-table altitudes between 1945 and 1989 that was generally correct to within about 1 foot in inundated and noninundated regions. In a 6-year time period (1962–67) in which the behavior of the rewetting procedure was studied in detail, there were 4,723 simulated cell rewettings, of which 3,172 were in the overland sheetflow layer and 1,551 were in the uppermost aquifer layer (layer 2). The average head adjustment in a cell rewetting was 0.10 foot in layer 1 and 0.15 foot in layer 2. This study demonstrates an empirical approach to the problem of cell rewetting that might prove useful in other models of flow in surficial aquifers.

Groundwater↗

VS2DI: Model use, calibration, and validation

VS2DI is a software package for simulating water, solute, and heat transport through soils or other porous media under conditions of variable saturation. The package contains a graphical preprocessor for constructing simulations, a postprocessor for displaying simulation results, and numerical models that solve for flow and solute transport (VS2DT) and flow and heat transport (VS2DH). Flow is described by the Richards equation, and solute and heat transport are described by advection-dispersion equations; the finite-difference method is used to solve these equations. Problems can be simulated in one, two, or three (assuming radial symmetry) dimensions. This article provides an overview of calibration techniques that have been used with VS2DI; included is a detailed description of calibration procedures used in simulating the interaction between groundwater and a stream fed by drainage from agricultural fields in central Indiana. Brief descriptions of VS2DI and the various types of problems that have been addressed with the software package are also presented.

Transactions of the ASABE↗

A seamless, high-resolution digital elevation model (DEM) of the north-central California coast

A seamless, 2-meter resolution digital elevation model (DEM) of the north-central California coast has been created from the most recent high-resolution bathymetric and topographic datasets available. The DEM extends approximately 150 kilometers along the California coastline, from Half Moon Bay north to Bodega Head. Coverage extends inland to an elevation of +20 meters and offshore to at least the 3 nautical mile limit of state waters. This report describes the procedures of DEM construction, details the input data sources, and provides the DEM for download in both ESRI Arc ASCII and GeoTIFF file formats with accompanying metadata.

California↗

EL68D Wasteway Watershed Land-Cover Generation

Classification of land cover from Landsat Enhanced Thematic Mapper Plus (ETM+) for the EL68D Wasteway Watershed in the State of Washington is documented. The procedures for classification include use of two ETM+ scenes in a simultaneous unsupervised classification process supported by extensive field data collection using Global Positioning System receivers and digital photos. The procedure resulted in a detailed classification at the individual crop species level.

Open-File Report↗

Database creation, data quality assessment, and geochemical maps (phase V, deliverable 59)—Final report on compilation and validation of geochemical data

Under the World Bank-funded Second Projet de Renforcement Institutionnel du Secteur Minier de la Republique Islamique de Mauritanie (PRISM-II), this Phase V geochemistry report follows earlier Phase I and Phase II summary reports on geochemical data (U.S. Geological Survey, 2007 and Eppinger, 2007; respectively). All the reports are based on evaluations of geochemical data collected in 1999-2004 under an earlier World Bank program (PRISM-I) by the British Geological Survey (BGS) and the Bureau de Recherches Géologiques et Minières (BRGM) for the Government of Mauritania. There are no associated Phase III or IV reports. The geochemical sample media collected by the BGS and BRGM under the PRISM-I contract included rock, sediment, regolith, and soil samples. Details on sample collection procedures are in unpublished reports available from PRISM. These samples were analyzed under PRISM-I contract by ALS Chemex Laboratories using various combinations of modern methods including fire-assay inductively coupled plasma-atomic emission spectrometry (ICPAES) and ICP-mass spectrometry (ICP-MS) for Au; multi-acid digestion, atomic absorption spectroscopy (AAS) for Ag and As; 47-element, four-acid digestion, ICP-MS; 27-element, fouracid digestion, ICP-AES; special four-acid ICP-MS techniques for Pt and B; fire assay followed by ICP-AES for platinum-group elements; whole-rock analyses by wavelength dispersive X-ray fluorescence (XRF); special techniques for loss-on-ignition, inorganic C, and total S; and special ore-grade AAS techniques for Ag, Au, Cu, Ni, Pb, and Zn. Around 30,000 samples were analyzed by at least one technique. However, it is stressed here that: (1) there was no common sample medium collected at all sites, likely due to the vast geological and geomorphologic differences across the country, (2) the sample site distribution is very irregular, likely due in part to access constraints and sand dune cover, and (3) there was no common across-the-board trace element analytical package used for all samples. These three aspects fundamentally affect the ability to produce country-wide geochemical maps of Mauritania. Gold (Au), silver (Ag), and arsenic (As) were the three elements that were most commonly analyzed.

Open-File Report↗

System characterization report on Planet’s Dove Classic

Executive Summary This report addresses system characterization of Planet’s Dove Classic satellites and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 4-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Dove Classic has an interior geometric performance in the range of −0.218 (−0.073 pixel) to −0.037 m (−0.012 pixel) in easting and −0.167 (−0.056 pixel) to −0.111 m (−0.037 pixel) in northing in band-to-band registration, an exterior geometric error of −6.841 (−2.280 pixels) in easting and −6.235 m (−2.078 pixels) in northing offset in comparison to Landsat 8 Operational Land Imager, a radiometric performance in the range of −0.057 to −0.010 in offset and 0.963 to 1.298 in slope, and a spatial performance in the range of 2.77 to 3.35 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.003 to 0.010.

Open-File Report↗

System characterization report on Planet’s Dove-R

Executive Summary This report addresses system characterization of Planet’s Dove-R and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 4-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Dove-R has an interior geometric performance in the range of −0.306 (−0.102 pixel) to 0.286 m (0.095 pixel) in easting and 0.090 (0.030 pixel) to 1.084 m (0.361 pixel) in northing in band-to-band registration, an exterior geometric performance of −5.10 m (−0.51 pixel) in easting and 3.30 m (0.33 pixel) in northing offset in comparison to Sentinel-2, a radiometric performance in the range of −0.023 to −0.008 in offset and 0.948 to 1.077 in slope, and a spatial performance in the range of 2.96 to 3.15 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.001 to 0.003.

Open-File Report↗

System characterization report on Planet SkySat

This report addresses system characterization of Planet’s SkySat and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. SkySat is a constellation of submeter resolution Earth observation satellites providing analytics services, high-definition video, and imagery. The goal for the constellation is to capture multiple daily repeats of high-resolution imagery over any spot on the Earth. As of September 2020, 21 SkySat satellites have been launched, and the first launch occurred in November 2013. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that SkySat has an interior geometric performance in the range of a 0.38- (0.47 pixel) to 0.75-meter (m; 0.93 pixel) root mean square error in easting and a 0.27- (0.33 pixel) to 0.55-m (0.68 pixel) root mean square error in northing, in band-to-band registration; an exterior geometric performance in the range of 0.26 (0.32 pixel) to 1.04 m (1.28 pixels) offset in comparison to ground control points; a radiometric performance in the range of 0.033 to 0.797 (linear regression); and a spatial performance in the range of 3.7 to 4.3 pixels at full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.004 to 0.009.

Open-File Report↗