Search USGS⌕ Search

SEARCH · Search USGS

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources
USGS2008

Characteristics, extent and origin of hydrothermal alteration at Mount Rainier Volcano, Cascades Arc, USA: Implications for debris-flow hazards and mineral deposits

Hydrothermal alteration at Mount Rainier waxed and waned over the 500,000-year episodic growth of the edifice. Hydrothermal minerals and their stable-isotope compositions in samples collected from outcrop and as clasts from Holocene debris-flow deposits identify three distinct hypogene argillic/advanced argillic hydrothermal environments: magmatic-hydrothermal, steam-heated, and magmatic steam (fumarolic), with minor superimposed supergene alteration. The 3.8 km 3 Osceola Mudflow (5600 y BP) and coeval phreatomagmatic F tephra contain the highest temperature and most deeply formed hydrothermal minerals. Relatively deeply formed magmatic-hydrothermal alteration minerals and associations in clasts include quartz (residual silica), quartz–alunite, quartz–topaz, quartz–pyrophyllite, quartz–dickite/kaolinite, and quartz–illite (all with pyrite). Clasts of smectite–pyrite and steam-heated opal–alunite–kaolinite are also common in the Osceola Mudflow. In contrast, the Paradise lahar, formed by collapse of the summit or near-summit of the edifice at about the same time, contains only smectite–pyrite and near-surface steam-heated and fumarolic alteration minerals. Younger debris-flow deposits on the west side of the volcano (Round Pass and distal Electron Mudflows) contain only low-temperature smectite–pyrite assemblages, whereas the proximal Electron Mudflow and a < 100 y BP rock avalanche on Tahoma Glacier also contain magmatic-hydrothermal alteration minerals that are exposed in the avalanche headwall of Sunset Amphitheater, reflecting progressive incision into deeper near-conduit alteration products that formed at higher temperatures. The pre-Osceola Mudflow alteration geometry is inferred to have consisted of a narrow feeder zone of intense magmatic-hydrothermal alteration limited to near the conduit of the volcano, which graded outward to more widely distributed, but weak, smectite–pyrite alteration within 1 km of the edifice axis, developed chiefly in porous breccias. The edifice was capped by a steam-heated alteration zone, most of which resulted from condensation of fumarolic vapor and oxidation of H 2 S in the unsaturated zone above the water table. Weakly developed smectite–pyrite alteration extended into the west and east flanks of the edifice, spatially associated with dikes that are localized in those sectors; other edifice flanks lack dikes and associated alteration. The Osceola collapse removed most of the altered core and upper east flank of the volcano, but intensely altered rocks remain on the uppermost west flank. Major conclusions of this study are that: (1) Hydrothermal–mineral assemblages and distributions at Mount Rainier can be understood in the framework of hydrothermal processes and environments developed from studies of ore deposits formed in analogous settings. (2) Frequent eruptions supplied sufficient hot magmatic fluid to alter the upper interior of the volcano hydrothermally, despite the consistently deep (≥ 8 km) magma reservoir which may have precluded formation of economic mineral deposits within or at shallow depths beneath Mount Rainier. The absence of indicator equilibrium alteration-mineral assemblages in the debris flows that effectively expose the volcano to a depth of 1–1.5 km also suggests a low potential for significant high-sulfidation epithermal or porphyry-type mineral deposits at depth. (3) Despite the long and complex history of the volcano, intensely altered collapse-prone rocks were spatially restricted to near the volcano's conduit system and summit, and short distances onto the upper east and west flanks, due to the necessary supply of reactive components carried by ascending magmatic fluids. (4) Intensely altered rocks were removed from the summit, east flank, and edifice interior by the Osceola collapse, but remain on the upper west flank in the Sunset Amphitheater area and present a continuing collapse hazard. (5) Visually conspicuous rocks on the lower east and mid-to-lower west flanks are not intensely altered and probably have not significantly weakened the rock, and thus do not present significant collapse hazards. (6) Alteration developed most intensely within breccia units, because of their high permeability and porosity. Volcanoes with abundant near-conduit upper-edifice breccias are prone to alteration increasing the possibility of collapse, whereas those that are breccia-poor (e.g., massive domes) are less prone to alteration.

Journal of Volcanology and Geothermal Research↗
USGS1993

The Geysers-Clear Lake area, California: Thermal waters, mineralization, volcanism, and geothermal potential

Manifestations of a major thermal anomaly in the Geysers-Clear Lake area of northern California include the late Pliocene to Holocene Clear Lake Volcanics, The Geysers geothermal field, abundant thermal springs, and epithermal mercury and gold mineralization. The epithermal mineralization and thermal springs typically occur along high-angle faults within the broad San Andreas transform fault system that forms the western boundary of the North American plate in this area. The young volcanic rocks overlie Mesozoic marine rocks of the Great Valley sequence which have been thrust above the coeval Franciscan Complex and penecontemporaneously dropped back down along low-angle detachment faults.Many of the waters of the region are nonmeteoric as defined by their isotopic signature. One type of isotopically shifted water emerges from or near Great Valley sequence rocks and is the most chloride rich. It is interpreted to be evolved connate in origin. A second type, evolved meteoric water, has moderate chloride contents, high boron contents, and high B/Cl ratios and is found locally in Franciscan rocks, notably at the Sulphur Bank mercury mine, where it probably results from near-closed-system, repeated boiling of meteoric water in host rocks that also contribute organic components to the water. At the Sulphur Bank mine fracturing of otherwise impermeable Franciscan rocks by faulting has created a localized zone of permeability in which thermal water boils repeatedly with limited venting to the surface. Boron-rich fluids were apparently present at depth in The Geysers geothermal field when intrusion of silicic magma occurred, because the concealed intrusion of felsite is surrounded by a halo of tourmaline-bearing hornfels. The volume of this poorly dated early to middle Quaternary intrusive body probably exceeds the 100 km 3 of erupted Clear Lake Volcanics. Similar intrusions may have occurred in the eastern part of the area at Wilbur Springs and the McLaughlin mine, where gold deposition and evidence of hydrothermal phenomena suggest more magmatic activity than is indicated by the small exposed bodies of early Quaternary basaltic lava. The Clear Lake Volcanics are the present locus of volcanism in the northern Coast Ranges and progressively older volcanic centers occur to the south. Geophysical data suggest that a large silicic magma body may be centered north of The Geysers steam field, providing the heat for the geothermal field.Geothermal power production has peaked at The Geysers and pressure declines indicate significant depletion of the fluid resource. The vapor-dominated field evolved from a preexisting hydrothermal system within fractured, otherwise impermeable Franciscan metamorphic rocks. A deep water table of saline fluid has been postulated to be present under the steam field, but no chloride-rich water has been found at drillable depth. We propose that recently discovered, isotopically shifted steam in the northwest Geysers area indicates the presence not of deep connate water but xather of boiled-down, boron-rich Franciscan evolved meteoric water. This water is likely to be present in limited quantities and will not provide a significant hot water resource for geothermal power production at The Geysers field or from the main Clear Lake volcanic field.

Economic Geology↗
USGS2017

Titanium

Titanium is a mineral commodity that is essential to the smooth functioning of modern industrial economies. Most of the titanium produced is refined into titanium dioxide, which has a high refractive index and is thus able to impart a durable white color to paint, paper, plastic, rubber, and wallboard. Because of their high strength-to-weight ratio and corrosion resistance, titanium metal and titanium metal alloys are used in the aerospace industry as well as for welding rod coatings, biological implants, and consumer goods. Ilmenite and rutile are currently the principal titanium-bearing ore minerals, although other minerals, including anatase, perovskite, and titanomagnetite, could have economic importance in the future. Ilmenite is currently being mined from two large magmatic deposits hosted in rocks of Proterozoic-age anorthosite plutonic suites. Most rutile and nearly one-half of the ilmenite produced are from heavy-mineral alluvial, fluvial, and eolian deposits. Titanium-bearing minerals occur in diverse geologic settings, but many of the known deposits are currently subeconomic for titanium because of complications related to the mineralogy or because of the presence of trace contaminants that can compromise the pigment production process. Global production of titanium minerals is currently dominated by Australia, Canada, Norway, and South Africa; additional amounts are produced in Brazil, India, Madagascar, Mozambique, Sierra Leone, and Sri Lanka. The United States accounts for about 4 percent of the total world production of titanium minerals and is heavily dependent on imports of titanium mineral concentrates to meet its domestic needs. Titanium occurs only in silicate or oxide minerals and never in sulfide minerals. Environmental considerations for titanium mining are related to waste rock disposal and the impact of trace constituents on water quality. Because titanium is generally inert in the environment, human health risks from titanium and titanium mining are minimal; however, the processes required to extract titanium from titanium feedstock can produce industrial waste.

Professional Paper↗
USGS1918

Baked shale and slag formed by the burning of coal beds

The baking and reddening of large masses of strata caused by the burning of coal beds is a striking feature of the landscape in most of the great western coal-bearing areas. The general character and broader effects of the burning have been described by many writers, but the fact that in places enough heat is generated to fuse and thoroughly recrystallize the overlying shale and sandstone has received less attention. Some of the natural slags thus formed simulate somewhat abnormal igneous rocks, but others consist largely of rare and little known minerals. A wide range in the mineral composition of such slags is to be expected, depending on the composition of the original sediment and the conditions of fusion and cooling. These products of purely thermal metamorphism offer a fertile field for petrologic investigation. The writer has observed the effects produced by the burning of coal beds in several localities in Montana, particularly along upper Tongue River in the southern part of the State, in the district lying southeast of the mouth of Bighorn River, and in the Little Sheep Mountain coal field north of Miles City. A number of specimens of the rock formed have been examined under the microscope, though time has not been available for a systematic examination. The writer is greatly indebted to Mr. E. S. Larsen for assistance in the study of some of the minerals.

Montana↗
USGS2003

Density and magnetic susceptibility values for rocks in the Talkeetna Mountains and adjacent region, south-central Alaska

This report presents a compilation and statistical analysis of 306 density and 706 magnetic susceptibility measurements of rocks from south-central Alaska that were collected by U.S. Geological Survey (USGS) and Alaska Division of Geological and Geophysical Surveys (ADGGS) scientists between the summers of 1999 and 2002. This work is a product of the USGS Talkeetna Mountains Transect Project and was supported by USGS projects in the Talkeetna Mountains and Iron Creek region, and by Bureau of Land Management (BLM) projects in the Delta River Mining District that aim to characterize the subsurface structures of the region. These data were collected to constrain potential field models (i.e., gravity and magnetic) that are combined with other geophysical methods to identify and model major faults, terrane boundaries, and potential mineral resources of the study area. Because gravity and magnetic field anomalies reflect variations in the density and magnetic susceptibility of the underlying lithology, these rock properties are essential components of potential field modeling. In general, the average grain density of rocks in the study region increases from sedimentary, felsic, and intermediate igneous rocks, to mafic igneous and metamorphic rocks. Magnetic susceptibility measurements performed on rock outcrops and hand samples from the study area also reveal lower magnetic susceptibilities for sedimentary and felsic intrusive rocks, moderate susceptibility values for metamorphic, felsic extrusive, and intermediate igneous rocks, and higher susceptibility values for mafic igneous rocks. The density and magnetic properties of rocks in the study area are generally consistent with general trends expected for certain rock types.

Alaska↗
USGS1994

Analysis of nitrogen saturation potential in Rocky Mountain tundra and forest: implications for aquatic systems

We employed grass and forest versions of the CENTURY model under a range of N deposition values (0.02–1.60 g N m −2 y −1 ) to explore the possibility that high observed lake and stream N was due to terrestrial N saturation of alpine tundra and subalpine forest in Loch Vale Watershed, Rocky Mountain National Park, Colorado. Model results suggest that N is limiting to subalpine forest productivity, but that excess leachate from alpine tundra is sufficient to account for the current observed stream N. Tundra leachate, combined with N leached from exposed rock surfaces, produce high N loads in aquatic ecosystems above treeline in the Colorado Front Range. A combination of terrestrial leaching, large N inputs from snowmelt, high watershed gradients, rapid hydrologic flushing and lake turnover times, and possibly other nutrient limitations of aquatic organisms constrain high elevation lakes and streams from assimilating even small increases in atmospheric N. CENTURY model simulations further suggest that, while increased N deposition will worsen the situation, nitrogen saturation is an ongoing phenomenon.

Biogeochemistry↗
USGS2009

Continental-scale patterns in soil geochemistry and mineralogy: results from two transects across the United States and Canada

In 2004, the US Geological Survey (USGS) and the Geological Survey of Canada (GSC) initiated a pilot study that involved collection of more than 1500 soil samples from 221 sites along two continental transects across Canada and the United States. The pilot study was designed to test and refine protocols for a soil geochemical survey of North America. The two transects crossed a wide array of soil parent materials, soil ages, climatic conditions, landforms, land covers and land uses. Sample sites were selected randomly at approximately 40-km intervals from a population defined as all soils of the continent. At each site, soils representing 0 to 5 cm depth, and the O, A, and C horizons, if present, were collected and analyzed for their near-total content of over 40 major and trace elements. Soils from 0–5 cm depth were also collected for analysis of organic compounds. Results from the transects confirm that soil samples collected at a 40-km spacing reveal coherent, continental- to subcontinental-scale geochemical and mineralogical patterns that can be correlated to aspects of underlying soil parent material, soil age and climate influence. The geochemical data also demonstrate that at the continental-scale the dominance of any of these major factors that control soil geochemistry can change across the landscape. Along both transects, soil mineralogy and geochemistry change abruptly with changes in soil parent materials. However, the chemical influence of a soil’s parent material can be obscured by changing climatic conditions. For the transects, increasing precipitation from west to east and increasing temperature from north to south affect both soil mineralogy and geochemistry because of climate effects on soil weathering and leaching, and plant productivity. Regional anomalous metal concentrations can be linked to natural variations in soil parent materials, such as high Ni and Cr in soils developed on ultramafic rocks in California or high P in soils formed on weathered Ordovician limestones in central Kentucky. On local scales, anomalous metal concentrations recognized in soil profiles, such as high P in soils from animal confinement sites, are consistent with local anthropogenic disturbances. At a larger scale, the distribution of Hg across the west to east transect demonstrates that it can be difficult to distinguish between natural or anthropogenic contributions and that many factors can contribute to an element’s spatial distribution. Only three samples in a subset of seventy-three 0–5 cm depth soil samples from the north to south transect had organochlorine pesticides values above the method detection limit, apparently related to historic usage of the pesticides DDT and dieldrin.

Applied Geochemistry↗
USGS2026

The petrogenesis of Þingmúli volcano, East Fjords, Iceland

In this work we revisit Þingmúli volcano (Þ = Th), a classic locality known as an example of a complete tholeiitic differentiation. Þingmúli is a ~ 9.5 Ma extinct central volcano located in the East Fjords of Iceland, in which the whole compositional spectrum from basalt to rhyolites have erupted. These volcanic products have been previously considered as petrogenetically related by an ideal fractionation trend, regardless any temporal relationship or volumetric considerations. Here we report new whole-rock geochemistry, mineral chemistry, isotope analyses, estimation of residence times of the different eruptive deposits, and an update of the original petrogenetic model. Our results highlight that an enriched source, likely spinel lherzolites, generated transitional-alkaline basaltic melts after 15–20% of partial melting at depths of 40–45 km. Many of these basaltic melts erupted at various stages of the volcano's history, while others remained longer in the volcanic plumbing system. These evolved by fractional crystallisation into basaltic andesite magmas with a residence time of ~5 years based on the crystal size distribution of the plagioclase population. Isotopic differences between the basalts/basaltic andesites ( 87 Sr/ 86 Sr ~ 0.7034; 143 Nd/ 144 Nd ~ 0.51315) and the erupted rhyolites ( 87 Sr/ 86 Sr ~ 0.7037; 143 Nd/ 144 Nd ~ 0.51304) indicate that the latter are not petrogenetically related to the former. Therefore, instead of a fractional crystallisation mechanism to generate the rhyolites, we propose the partial melting of ignimbrite layers located beneath the volcano. The broad range of trace element concentrations in andesites and dacites and their different isotopic values compared to the basalts strongly suggest that these magmas have been generated by magma mixing between basaltic and rhyolitic melts, similar to modern day Icelandic volcanoes such as Hekla. These results highlight the need to revisit previously studied Icelandic classic localities and reassess their traditionally proposed petrogenetic models.

Þingmúli volcano, East Fjords↗
USGS2019

Overview of spirit microscopic imager results

This paper provides an overview of Mars Exploration Rover Spirit Microscopic Imager (MI) operations and the calibration, processing, and analysis of MI data. The focus of this overview is on the last five Earth years (2005–2010) of Spirit 's mission in Gusev crater, supplementing the previous overview of the first 450 sols of the Spirit MI investigation. Updates to radiometric calibration using in‐flight data and improvements in high‐level processing are summarized. Released data products are described, and a table of MI observations, including target/feature names and associated data sets, is appended. The MI observed natural and disturbed exposures of rocks and soils as well as magnets and other rover hardware. These hand‐lens‐scale observations have provided key constraints on interpretations of the formation and geologic history of features, rocks, and soils examined by Spirit . MI images complement observations by other Spirit instruments, and together show that impact and volcanic processes have dominated the origin and evolution of the rocks in Gusev crater, with aqueous activity indicated by the presence of silica‐rich rocks and sulfate‐rich soils. The textures of some of the silica‐rich rocks are similar to terrestrial hot spring deposits, and observations of subsurface cemented layers indicate recent aqueous mobilization of sulfates in places. Wind action has recently modified soils and abraded many of the rocks imaged by the MI, as observed at other Mars landing sites.

Journal of Geophysical Research E: Planets↗
USGS2021

Molecular and isotopic gas composition of the Devonian Berea Sandstone and implications for gas evolution, eastern Kentucky

Since 2011, the Devonian Berea Sandstone in northeastern Kentucky has produced oil where thermal maturity studies indicate that likely source rocks, namely, the Devonian Ohio Shale and Mississippian Sunbury Shale, are thermally immature. Downdip, where source rocks are mature for oil, the Berea Sandstone and Ohio Shale primarily produce gas. To investigate this thermal maturity discordancy, the molecular and isotopic composition of gases from the Berea Sandstone (oil associated) and Ohio Shale (nonassociated) were analyzed to understand the gas generation and migration history. Collected along a northwest-southeast transect in eastern Kentucky, samples range from 1079 to 4602 ft, respectively. All are wet gases with a thermogenic origin (δ 13 C-CH 4 &equals; −53.5‰ to −46.1‰). This is mostly consistent with a reevaluation of thermal maturity in a companion study that expands the area mature for oil. Gas migration is required, however, in updip parts of the Berea play where vitrinite reflectance ( VR o ) values are less than 0.6%. Southeast regional dip exerts a first-order influence on thermal maturity as gases become drier and isotopically heavier downdip. Correlation of δ 13 C values for heavier hydrocarbon gases in a natural gas plot with VR o contour spacing demonstrates the influence of nearby source rock thermal maturity on gas composition. Downdip, migration of oil and the attendant increase in permeability relative to gas may account for the dominance of gas production in the Ohio Shale. Migration along with basin uplift after the Alleghany orogeny may have contributed to development of a gas phase that exsolved from oil.

Kentucky↗
USGS2007

Petroleum systems and assessment of undiscovered oil and gas in the Raton Basin – Sierra Grande Uplift Province, Colorado and New Mexico — USGS Province 41

Introduction The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geologically based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States. The USGS recently completed an assessment of undiscovered oil and gas resources of the Raton Basin-Sierra Grande Uplift Province of southeastern Colorado and northeastern New Mexico (USGS Province 41). The Cretaceous Vermejo Formation and Cretaceous-Tertiary Raton Formation have production and undiscovered resources of coalbed methane. Other formations in the province exhibit potential for gas resources and limited production. This assessment is based on geologic principles and uses the total petroleum system concept. The geologic elements of a total petroleum system include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (sequence stratigraphy and petrophysical properties), and hydrocarbon traps (trap formation and timing). The USGS used this geologic framework to define two total petroleum systems and five assessment units. All five assessment units were quantitatively assessed for undiscovered gas resources. Oil resources were not assessed because of the limited potential due to levels of thermal maturity of petroleum source rocks.

Colorado, New Mexico↗
USGS2016

Revisions to the original extent of the Devonian Shale-Middle and Upper Paleozoic Total Petroleum System

Technically recoverable undiscovered hydrocarbon resources in continuous accumulations are present in Upper Devonian and Lower Mississippian strata in the Appalachian Basin Petroleum Province. The province includes parts of New York, Pennsylvania, Ohio, Maryland, West Virginia, Virginia, Kentucky, Tennessee, Georgia, and Alabama. The Upper Devonian and Lower Mississippian strata are part of the previously defined Devonian Shale-Middle and Upper Paleozoic Total Petroleum System (TPS) that extends from New York to Tennessee. This publication presents a revision to the extent of the Devonian Shale-Middle and Upper Paleozoic TPS. The most significant modification to the maximum extent of the Devonian Shale-Middle and Upper Paleozoic TPS is to the south and southwest, adding areas in Tennessee, Georgia, Alabama, and Mississippi where Devonian strata, including potential petroleum source rocks, are present in the subsurface up to the outcrop. The Middle to Upper Devonian Chattanooga Shale extends from southeastern Kentucky to Alabama and eastern Mississippi. Production from Devonian shale has been established in the Appalachian fold and thrust belt of northeastern Alabama. Exploratory drilling has encountered Middle to Upper Devonian strata containing organic-rich shale in west-central Alabama. The areas added to the TPS are located in the Valley and Ridge, Interior Low Plateaus, and Appalachian Plateaus physiographic provinces, including the portion of the Appalachian fold and thrust belt buried beneath Cretaceous and younger sediments that were deposited on the U.S. Gulf Coastal Plain.

Open-File Report↗
USGS1979

Ground-water availability in carbonate rocks of the Dandridge area, Jefferson County, Tennessee

Groundwater in Jefferson County, Tenn., occurs in solution openings that follow bedding planes and strike joints in the dense limestone and dolomite. Recharge beginning at topographic highs in the northwest moves across strike to lows in the southeast; it is intercepted and collected by high permeability beds in the middle of the Knox Group and is routed along strike to discharge at large springs. Exploratory wells were drilled at two sites to test this concept of the flow system. Three wells at Moore Spring site in the recharge area penetrated only mud and solid rock. Four wells at Riley Spring site in the discharge area each penetrated at least five water-bearing openings that gave these wells an average production of 93 gallons per minute and a maximum of 180 gallons per minute. (USGS)

Open-File Report↗
USGS2017

Tin

Tin (Sn) is one of the first metals to be used by humans. Almost without exception, tin is used as an alloy. Because of its hardening effect on copper, tin was used in bronze implements as early as 3500 B.C. The major uses of tin today are for cans and containers, construction materials, transportation materials, and solder. The predominant ore mineral of tin, by far, is cassiterite (SnO 2 ). In 2015, the world’s total estimated mine production of tin was 289,000 metric tons of contained tin. Total world reserves at the end of 2016 were estimated to be 4,700,000 metric tons. China held about 24 percent of the world’s tin reserves and accounted for 38 percent of the world’s 2015 production of tin. The proportion of scrap used in tin production is between 10 and 25 percent. Unlike many metals, tin recycling is relatively efficient, and the fraction of tin in discarded products that get recycled is greater than 50 percent. Only about 20 percent of the world’s identified tin resources occur as primary hydrothermal hard-rock veins, or lodes. These lodes contain predominantly high-temperature minerals and almost invariably occur in close association with silicic, peraluminous granites. About 80 percent of the world’s identified tin resources occur as unconsolidated secondary or placer deposits in riverbeds and valleys or on the sea floor. The largest concentration of both onshore and offshore placers is in the extensive tin belt of Southeast Asia, which stretches from China in the north, through Thailand, Burma (also referred to as Myanmar), and Malaysia, to the islands of Indonesia in the south. Furthermore, tin placers are almost always found closely allied to the granites from which they originate. Other countries with significant tin resources are Australia, Bolivia, and Brazil. Most hydrothermal tin deposits belong to what can be thought of as a superclass of porphyry-greisen deposits. The hydrothermal tin deposits are all characterized by a close spatial, temporal, and genetic association with highly differentiated, peraluminous porphyritic granite intrusions. The intrusions form pegmatites; disseminated ore; parallel or subparallel, greisen-bordered sheeted veins that either cross-cut the intrusion or are peripheral to it; skarns; and (or) limestone replacements that contain different amounts of cassiterite, molybdenite, and wolframite. The tectonic settings of tin-bearing granites are relatively well understood and of limited variety. Tin and tungsten deposits and their associated igneous rocks are found mainly in continental settings. Historically, prospecting for tin has been carried out by the time-honored methods of panning, drilling, trenching, and assaying. Geophysical and geochemical surveys have been employed to cover large areas more rapidly, isolating areas of possible tin deposits so that drilling can be more effective and less costly. Elemental concentrations and relationships of the lithophile elements, especially barium, lithium, niobium, potassium, rubidium, and zirconium, are the most reliable chemical indicators of ore-forming processes and tin-bearing potential. The average human diet includes an intake of about 10 milligrams per day of tin. Ingestion of tin in significantly greater amounts than 10 milligrams per day may lead to a stomach ache, anemia, and liver and kidney problems. Exposure to some organo-tin compounds can interfere with brain and nervous system function and, in severe cases, can cause death. Extended inhalation of tin oxide—an issue mainly for those people who work in the tin industry—results in a higher potential to develop stannosis, which is a mild disease of the lungs caused by the inhalation of tin-bearing dust. Inorganic tin is poorly absorbed by the body, and no evidence exists for the carcinogenicity of metallic tin and tin compounds in humans. Most placer tin deposits are mined by open pit and (or) dredging methods. Mining of alluvial placers in modern streambeds and riverbeds is likely to increase the amount of sediment delivered downstream. This, combined with potential diversion of rivers and streams, may negatively affect downstream ecosystems. Many of the placer deposits located in Burma, Indonesia, Malaysia, and Thailand are located offshore. Most offshore placer tin deposits are mined by dredging methods, which have the potential to negatively affect benthic, midwater, and pelagic ecosystems. In a congressionally mandated U.S. Department of Defense study of strategic minerals published in 2013, tin has the greatest shortfall amount (insufficient supply to meet demand) at \$416 million; this amount is more than twice that of antimony ($182 million), which is the strategic mineral with the next largest shortfall amount (U.S. Department of Defense, 2013). The United States imported 75 percent of its tin supply in 2015. During the period 2012–15, these imports were from, in descending order of amount imported, Peru, Indonesia, Malaysia, and Bolivia. A promising advancement concerning research into the origin of tin deposits is the recent development of a reliable method of analyzing tin isotopes in cassiterite. Although the mechanism of transport and deposition of tin is fairly well understood, the means by which tin is incorporated into the parent magma at the points of magma generation and ascent needs further investigation. Tin metallogenic provinces worldwide are well known. Consequently, any undiscovered tin deposits will likely be spatially close to known deposits or extensions of the same.

Professional Paper↗
USGS2005

Stratabound copper-silver deposits of the Mesoproterozoic Revett Formation, Montana and Idaho, with a section on databases and spatial-data files for the geology and mineral deposits of the Revett Formation

The western Montana copper belt in western Montana and northern Idaho contains several large stratabound copper-silver deposits in fine- to medium-grained quartzite beds of the Revett Formation of the Mesoproterozoic (1,470-1,401 Ma) Belt Supergroup. Production from the deposits at the Troy Mine and lesser production from the Snowstorm Mine has yielded 222,237 tons Cu and 1,657.4 tons Ag. Estimates of undeveloped resources, mostly from the world-class Rock Creek-Montanore deposits, as well as lesser amounts at the Troy Mine, total more than 2.9 million tons Cu and 2,600 tons Ag in 406 million tons of ore.The Rock Creek-Montanore and Troy deposits, which are currently the most significant undeveloped resources identified in the copper belt, are also among the largest stratabound copper-silver deposits in North America and contain about 15 percent of the copper in such deposits in North America. Worldwide, stratabound copper-silver deposits contain 23 percent of all copper resources and are the second-most important global source of the metal after porphyry copper deposits.The Revett Formation, which consists of subequal amounts of argillite, siltite, and quartzite, is informally divided into lower, middle, and upper members on the basis of the proportions of the dominant rock types. The unit thickness increases from north to south, from 1,700 ft near the Troy Mine, 55 mi north of Wallace, Idaho, to more than 5,300 ft at Wallace, Idaho, in the Coeur d'Alene Trough south of the Osburn Fault, a major right-lateral strike-slip fault.Mineral deposits in the Revett Formation occur mostly in the A-D beds of the lower member and in the middle quartzite of the upper member. The deposits are concentrated along a preore pyrite/hematite interface in relatively coarse grained, thick quartzite beds that acted as paleoaquifers for ore fluids. The deposits are characterized by mineral zones (alteration-mineral assemblages) that are a useful guide to the locations of mineral deposits. In particular, the gradational zone between the chalcopyrite-ankerite and pyrite-calcite zones is the site of most mineral deposits. Detailed information on the geology and mineral deposits of the Revett Formation is presented in the accompanying files that include (1) a tab-delimited text file providing details of the geologic and mineral-resource data for 57 Revett-subtype stratabound copper-silver deposits, occurrences, and prospects; (2) the stratigraphic records of 40 diamond-drill cores and 86 measured sections, totaling 150,752 ft of true thickness, which are provided in Excel spreadsheet and Adobe Portable Document Format files; and (3) spatial geologic data consisting of geologic maps of the Revett Formation, the subsurface locations of resources in Revett-subtype stratabound copper-silver deposits based on diamond-drill-core data, and the locations of diamond-drill holes and measured sections. The spatial data are contained in Arc/Info interchange files. Spatial information derived from these data includes the locations of mineral zones, a digital database showing untested exploration areas, and a digital database of permissive tracts for undiscovered mineral deposits.

Idaho, Montana↗
USGS1954

Uranium deposits in Fall River County, South Dakota

In 1951 uranium deposits contained carnotite were discovered in the southern Black Hills near Edgemont, Fall River County, S. Dak. Numerous carnotite deposits have since been found in sandstones in the Inyan Kara group of early Cretaceous age, and uranium-bearing material has been discovered in the Pennsylvania Minnelusa sandstone of Pennsylvanian age and the Deadwood formation of Cambrian age in the southern Black Hills. Ore has been produced only from the Inyan Kara group, mostly within an area of about 30 square miles along the southwest flank of the Black Hills uplift between Dewey and Hot Springs in Custer and Fall River Counties. In addition, occurrences of uranium in other parts of the Black Hills and the surrounding area are known or reported from sedimentary, igneous, and metamorphic rocks of pre-Cambrian to Tertiary age. The upper and lowermost formations of the Inyan Kara group - the Fall River and Lakota sandstones - contain the productive uranium deposits. These terrestrial formations are composed predominantly of massive sandstone lenses within units of thinly bedded sandstone and mudstone, but locally these formations contain abundant mudstone and thinly bedded sandstone. Massive sandstone lenses in the Lakota sandstone commonly overlap and truncate underlying lenses. The lenses are separated by thin units of thinly bedded sandstone and mudstone. Iron stain, carbonaceous material, thin seams of gypsum, ripple marks, concretions, and fossil roots are common in the mudstone and thinly bedded portions of these formations. Some high angle normal faults of small displacement are found in the area containing the largest number of uranium occurrences in the Inyan Kara group. Although no ore deposits seen were cut by faults, high-angle fractures parallel and at right angles to the faults contain carnotite for short distances. The productive uranium deposits are most common where the Fall River and Lakota sandstones locally contain a large proportion of mudstone and thinly bedded sandstone. Other deposits are in the massive sandstone lenses of the Lakota sandstone and in the thin units between the lenses. Although carnotite is the most conspicuous and important mineral in most deposits, corvusite is an important constituent of some deposits. Other uranium minerals in the deposits are tyuyamunite, rauvite, and autunite. Ore produced in 1952 from the Fall River and Lakota sandstones contained about 0.2 percent U 3 O 8 and 0.6 percent V 2 O 5 . In general, deposits in the Fall River and Lakota sandstones contain about the same percentage of U 3 O 8 , but the deposits in the Fall River sandstone appear to have a higher percentage of vanadium. The grade of individual deposits, however, is highly variable. Most deposits are small, but a few have yielded as much as a thousand tons of ore.

South Dakota↗
USGS2020

Conceptual framework and approach for conducting a geoenvironmental assessment of undiscovered uranium resources

This report presents a novel conceptual framework and approach for conducting a geologically based environmental assessment, or geoenvironmental assessment, of undiscovered uranium resources within an area likely to contain uranium deposits. The framework is based on a source-to-receptor model that prioritizes the most likely contaminant sources, contaminant pathways, and affected environmental media for three common uranium extraction methods—open pit or underground mining with milling and in situ recovery (ISR). Data on regional geology, hydrology, and climate, as well as historical uranium mining and milling records are used to estimate the probable amounts of waste rock, tailings, wastewater, surface land disturbance, and subsurface aquifer disturbance for likely mining methods. Constituents of concern that might take the form of leachates, dust, radon, and sediments formed by chemical and physical weathering are also identified in the geoenvironmental assessment. Finally, areas where constituents of concern are likely to occur and persist in air, land, surface water, and groundwater are indicated by the potential for dispersion of dust by wind, accumulation of radon because of air stagnation, dispersion of sediments and wastewater by runoff, and infiltration of wastewater or leachates with consideration of the likely mobility of contaminants in surface water and groundwater. The geoenvironmental assessment output can be summarized in the following primary products: (1) a descriptive geoenvironmental model; (2) maps and statistics of variables that indicate the potential for constituents of concern to occur and persist in air, land, surface water, and groundwater within a tract that is geologically permissive for the occurrence of uranium; and (3) tables providing estimated or indicated quantities of waste rock, tailings, wastewater, dust, and radon emissions that could be associated with undiscovered uranium resources, if extracted, for each permissive tract. The uranium geoenvironmental assessment could help natural resource managers to prioritize and (or) identify (1) important potential contaminant pathways, (2) management practices required depending on the types of constituents that could be of concern, (3) areas for response in the event of accidental release, and (4) future directions for study. Furthermore, indicators of rock and water volumes potentially associated with an undiscovered uranium deposit may be evaluated to make quantitative comparisons of water required for uranium production or potential waste products generated during uranium extraction from areas permissive for uranium resource occurrence throughout the United States.

Scientific Investigations Report↗
USGS1956

Geology and ore deposits of the Whitepine area, Tomichi mining district, Gunnison County, Colorado

The Tomichi mining district is on the western slope of the Continental Divide near the southern end of the Sawatch Range in southeastern Gunnison County, Colorado. The most productive part of the Tomichi district was the Whitepine area. It is estimated that since the discovery of ore in 1879 the area has produced approximately $7,000,000, principally in lead and zinc, with lesser amounts of silver, copper, and gold. Geologically, the Whitepine area is a faulted syncline of Paleozoic rocks that was intruded by Tertiary igneous rocks. The oldest rock of the area is the Silver Plume granite of pre-Cambrian age. Deposited upon this successively were the Sawatch quartzite (Late Cambrian), Manitou dolomite (Early Ordovician), Harding quartzite (Middle Ordovician), Fremont dolomite (Lade Ordovician), Chaffee formation (Late Devonian), Leadville limestone (Late Mississippian), and Beldon shale (Late Pennsylvanian); a total thickness of about 1,450 feet. During the Laramide Revolution, the sedimentary rocks were folded into a broad northward-plunging syncline, faulted, and intruded by a series of igneous rocks. The igneous rocks, in order of relative age from oldest to youngest, are: a rhyolite stock, the Princeton quartz monzonite batholith, quartz monzonite or quartz latite porphyry dikes, and rhyolite or pitchstone porphyry dikes. The ore deposits of the Whitepine area may be classified into replacement deposits, vein deposits, and contact metamorphic deposits. The replacement deposits may be further subdivided into deposits along faults and bedded deposits. Of the types of deposits, the most productive have been the replacement deposits along faults. The major replacement deposits along faults are those of the Akron, Morning Star, and Victor mines. The ore deposits of these mines are in the foot wall of the Star faults in the Akron mine in the Manitou dolomite and in the Morning Star and Victor mines in the Leadville limestone. The chief bedded replacement deposits are those of the Erie, North Star, and Tenderfoot mines. In the Erie mine the ore deposits are in the Leadville limestone at, or just below, its contact with the Belden shale. In the North Star and Tenderfoot mines the ore bodies are in the Manitou dolomite along the crest of an anticline and the trough of a syncline, respectively. The vein deposits occur in the Silver Plume granite, Princeton quartz monzonite, and Paleozoic sedimentary rocks. The only vein of commercial importance was that of the Spar Copper mine, which is in the Silver Plume granite. Contact metamorphic minerals are found chiefly in the top of the Leadville limestone in the vicinity of the Erie mine, and in the limestone of the Belden shale. Magnetite is the only ore mineral and it was produced only from the Iron King mine. The replacement deposits consist, in general, of sphalerite, galena, pyrite, and chalcopyrite in a gangue of siliclfied limestone or dolomite, quartz, and calcite. The veins, for the most part, consist of pyrite and quartz with only minor amounts of galena, sphalerite, and chalcopyrite. In both types of deposits gold is believed to be associated with the pyrite and sphalerite and silver with the galena. Oxidized ore was the chief product of the early mining. This ore consists of calamine, cerussite, smithsonite, or anglesite, or a combination of these minerals, in a gangue of siliceous limestone or silicified limestone or dolomite. Oxidation did not extend, in most cases, for more than 150 feetbelow the surface. The ore deposits are believed to be genetically related to the Princeton quartz monzonite batholith. Ore-bearing solutions derived from the cooling of magma are believed to have migrated upwards along the pre-existing faults replacing favorable zones in the sedimentary rocks, or depositing quartz and ore minerals in open fissures in the igneous rocks.

Open-File Report↗