SEARCH · Search USGS

Results for “Petrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources

USGS1983

Isotopic evidence from the eastern Canadian shield for geochemical discontinuity in the proterozoic mantle

Most workers agree that Proterozoic anorthosite massifs represent the crystallization products of mantle-derived magmas1,2, although the composition of the parental melts is a major unsolved petrological problem 3. As mantle-derived rocks, the massifs can be used as geochemical probes of their late Precambrian upper mantle sources. We report here Nd and Sr isotopic compositions of anorthosites and related rocks from the Grenville and Nain Provinces of the eastern Canadian shield. Here 75% of the Earth's known anorthosite is found in a 1,600-km belt from the Adirondack Mountains of northern New York State to the eastern coast of Labrador4 (Fig. 1). The results indicate that the massifs were derived from at least two distinct mantle source regions which were established before 1,650 Myr ago, and were episodically involved in magmatism over ???500 Myr. One reservoir, below the Grenville Province, and probably below much of the eastern Superior Province, was isotopically similar to the depleted, modern-day mid-ocean ridge basalt (MORB) source. The other reservoir was chondritic to moderately enriched, and is most easily identified in the Nain Province, but may have occurred scattered throughout the Superior Province. ?? 1983 Nature Publishing Group.

Nature↗

USGS1989

Geochemical evidence for invasion of Kilauea's plumbing system by Mauna Loa magma

From the beginning of the study of Hawaiian volcanism there has been controversy over possible relationships between the neighbouring active volcanoes Mauna Loa and Kilauea 1–5 . Seismic activity, thought to reflect upward migration of magma, reveals that the magmatic plumbing systems apparently converge at depth to form a broad funnel within the mantle 6 . Although on rare occasions they have erupted concurrently, the brief historical eruptive record appears to show that when Kilauea is most active, Mauna Loa is in repose and vice versa, suggesting that they may be competing for the same magma supply 5,7 . Petrological, geochemical and isotope data, however, require a diametrically opposite conclusion. Distinct differences in major-element, trace-element and isotope compositions of lavas are regarded as compelling evidence that the two volcanoes have separate magmatic plumbing systems, supplied by parental magmas from physically and geochemically distinct mantle sources 8–13 . Here we present preliminary geochemical data which show that in the past 2,000 years Kilauea has erupted a spectrum of lava compositions resembling historical Kilauea lavas at one end and Mauna Loa lavas at the other. We discuss the cause of this diversity, and speculate that magma from Mauna Loa may have invaded Kilauea's 'high-level' magmatic plumbing system.

Hawaii↗

USGS2020

Cryptic evolved melts beneath monotonous basaltic shield volcanoes in the Galápagos Archipelago

Many volcanoes erupt compositionally homogeneous magmas over timescales ranging from decades to millennia. This monotonous activity is thought to reflect a high degree of chemical homogeneity in their magmatic systems, leading to predictable eruptive behaviour. We combine petrological analyses of erupted crystals with new thermodynamic models to characterise the diversity of melts in magmatic systems beneath monotonous shield volcanoes in the Galápagos Archipelago (Wolf and Fernandina). In contrast with the uniform basaltic magmas erupted at the surface over long timescales, we find that the sub-volcanic systems contain extreme heterogeneity, with melts extending to rhyolitic compositions. Evolved melts are in low abundance and large volumes of basalt flushing through the crust from depth overprint their chemical signatures. This process will only maintain monotonous activity while the volume of melt entering the crust is high, raising the possibility of transitions to more silicic activity given a decrease in the crustal melt flux.

Nature Communications↗

USGS2016

ChemCam activities and discoveries during the nominal mission of the Mars Science Laboratory in Gale crater, Mars

At Gale crater, Mars, ChemCam acquired its first laser-induced breakdown spectroscopy (LIBS) target on Sol 13 of the landed portion of the mission (a Sol is a Mars day). Up to Sol 800, more than 188 000 LIBS spectra were acquired on more than 5800 points distributed over about 650 individual targets. We present a comprehensive review of ChemCam scientific accomplishments during that period, together with a focus on the lessons learned from the first use of LIBS in space. For data processing, we describe new tools that had to be developed to account for the uniqueness of Mars data. With regard to chemistry, we present a summary of the composition range measured on Mars for major-element oxides (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O) based on various multivariate models, with associated precisions. ChemCam also observed H, and the non-metallic elements C, O, P, and S, which are usually difficult to quantify with LIBS. F and Cl are observed through their molecular lines. We discuss the most relevant LIBS lines for detection of minor and trace elements (Li, Rb, Sr, Ba, Cr, Mn, Ni, and Zn). These results were obtained thanks to comprehensive ground reference datasets, which are set to mimic the expected mineralogy and chemistry on Mars. With regard to the first use of LIBS in space, we analyze and quantify, often for the first time, each of the advantages of using stand-off LIBS in space: no sample preparation, analysis within its petrological context, dust removal, sub-millimeter scale investigation, multi-point analysis, the ability to carry out statistical surveys and whole-rock analyses, and rapid data acquisition. We conclude with a discussion of ChemCam performance to survey the geochemistry of Mars, and its valuable support of decisions about selecting where and whether to make observations with more time and resource-intensive tools in the rover's instrument suite. In the end, we present a bird's-eye view of the many scientific results: discovery of felsic Noachian crust, first observation of hydrated soil, discovery of manganese-rich coatings and fracture fills indicating strong oxidation potential in Mars' early atmosphere, characterization of soils by grain size, and wide scale mapping of sedimentary strata, conglomerates, and diagenetic materials.

Journal of Analytical Atomic Spectrometry↗

USGS2008

One-dimensional thermal modelling of Acadian metamorphism in southern Vermont, USA

One-dimensional thermal (1DT) modelling of an Acadian (Devonian) tectonothermal regime in southern Vermont, USA, used measured metamorphic pressures and temperatures and estimated metamorphic cooling ages based on published thermobarometric and geochronological studies to constrain thermal and tectonic input parameters. The area modelled lies within the Vermont Sequence of the Acadian orogen and includes: (i) a western domain containing garnet-grade pre-Silurian metasedimentary and metavolcanic rocks from the eastern flank of an Acadian composite dome structure (Rayponda-Sadawga Dome); and (ii) an eastern domain containing similar, but staurolite- or kyanite-grade, rocks from the western flank of a second dome structure (Athens Dome), approximately 10 km farther east. Using reasonable input parameters based on regional geological, petrological and geochronological constraints, the thermal modelling produced plausible P-T paths, and temperature-time (T-t) and pressure-time (P-t) curves. Information extracted from P-T-t modelling includes values of maximum temperature and pressure on the P-T paths, pressure at maximum temperature, predicted Ar closure ages for hornblende, muscovite and K-feldspar, and integrated exhumation and cooling rates for segments of the cooling history. The results from thermal modelling are consistent with independently obtained pressure, temperature and Ar cooling age data on regional metamorphism in southern Vermont. Modelling results provide some important bounding limits on the physical conditions during regional metamorphism, and indicate that the pressure contemporaneous with the attainment of peak temperature was probably as much as 2.5 kbar lower than the actual maximum pressure experienced by rocks along various particle paths. In addition, differences in peak metamorphic grade (garnet-grade versus staurolite-grade or kyanite-grade) and peak temperature for rocks initially loaded to similar crustal depths, differences in calculated exhumation rates, and differences in 40Ar/39Ar closure ages are likely to have been consequences of variations in the duration of isobaric heating (or 'crustal residence periods') and tectonic unroofing rates. Modelling results are consistent with a regional structural model that suggests west to east younging of specific Acadian deformational events, and therefore diachroneity of attainment of peak metamorphic conditions and subsequent 40Ar/39Ar closure during cooling. Modelling is consistent with the proposition that regional variations in timing and peak conditions of metamorphism are the result of the variable depths to which rocks were loaded by an eastward-thickening thrust-nappe pile rooted to the east (New Hampshire Sequence), as well as by diachronous structural processes within the lower plate rocks of the Vermont Sequence.

Journal of Metamorphic Geology↗

USGS2009

The Mono Arch, eastern Sierra region, California: Dynamic topography associated with upper-mantle upwelling?

A broad, topographic flexure localized east of and over the central and southern Sierra Nevada, herein named the Mono Arch, apparently represents crustal response to lithospheric and/or upper-mantle processes, probably dominated by mantle upwelling within the continental interior associated Pacific-North American plate-boundary deformation. This zone of flexure is identified through comparison between the topographic characteristics of the active Cascade volcanic arc and backarc regions with the analogous former arc and backarc in the Sierra Nevada and eastern Sierra Nevada. Serial topographic profiles measured normal to the modern Cascade backarc reveal an accordance of topographic lows defined by valley floors with an average minimum elevation of ???1400-1500m for over 175km to the southeast. Although the accordance drops in elevation slightly to the south, the modern Cascade backarc region is remarkably level, and is characterized by relief up to ???750m above this baseline elevation. By contrast, serial topographic profiles over the former arc and backarc transitions of the eastern Sierra region exhibit a regional anticlinal warping defined by accordant valley floors and by a late Miocene-early Pliocene erosion surface and associated deposits. The amplitude of this flexure above regionally flat baseline elevations to the east varies spatially along the length of the former Sierran arc, with a maximum of ???1000m centred over the Bridgeport Basin. The total zone of flexure is approximately 350km long N-S and 100km wide E-W, and extends from Indian Wells Valley in the south to the Sonora Pass region in the north. Previous geophysical, petrologic, and geodetic studies suggest that the Mono Arch overlies a zone of active mantle upwelling. This region also represents a zone crustal weakness formerly exploited by the middle-to-late Miocene arc and is presently the locus of seismic and volcanic activities. This seismic zone, which lies east of the Sierra Nevada block, includes the northern and central Walker Lane in Nevada and the eastern California shear zone to the south in California. Vertical patterns of surface deformation over this region are characterized by west tilting of the Sierra Nevada block and by block faulting of a late Miocene erosion surface east of the Sierra Nevada.

International Geology Review↗

USGS2014

Mantle peridotite in newly discovered far-inland subduction complex, southwest Arizona: Initial report

The latest Cretaceous to early Palaeogene Orocopia Schist and related units are generally considered a low-angle subduction complex that underlies much of southern California and Arizona. A recently discovered exposure of Orocopia Schist at Cemetery Ridge west of Phoenix, Arizona, lies exceptionally far inland from the continental margin. Unexpectedly, this body of Orocopia Schist contains numerous blocks, as large as ~300 m, of variably serpentinized mantle peridotite. These are unique; elsewhere in the Orocopia and related schists, peridotite is rare and completely serpentinized. Peridotite and metaperidotite at Cemetery Ridge are of three principal types: (1) serpentinite and tremolite serpentinite, derived from dunite; (2) partially serpentinized harzburgite and olivine orthopyroxenite (collectively, harzburgite); and (3) granoblastic or schistose metasomatic rocks, derived from serpentinite, made largely of actinolite, calcic plagioclase, hercynite, and chlorite. In the serpentinite, paucity of relict olivine, relatively abundant magnetite (5%), and elevated Fe 3 + /Fe indicate advanced serpentinization. Harzburgite contains abundant orthopyroxene, only slightly serpentinized, and minor to moderate (1–15%) relict olivine. Mantle tectonite fabric is locally preserved. Several petrographic and geochemical characteristics of the peridotite at Cemetery Ridge are ambiguously similar to either abyssal or mantle-wedge (suprasubduction) peridotites and serpentinites. Least ambiguous are orthopyroxene compositions. Orthopyroxene is distinctively depleted in Al 2 O 3 , Cr 2 O 3 , and CaO, indicating mantle-wedge affinities. Initial interpretation of field and petrologic data suggests that the peridotite blocks in the Orocopia Schist subduction complex at Cemetery Ridge may be derived from the leading corner or edge of a mantle wedge, presumably in (pre-San Andreas fault) southwest California. However, derivation from a subducting plate is not precluded.

Arizona↗

USGS2016

Metaultramafic schists and dismembered ophiolites of the Ashe Metamorphic Suite of northwestern North Carolina, USA

Metaultramafic rocks (MUR) in the Ashe Metamorphic Suite (AMS) of northwestern North Carolina include quartz ± feldspar-bearing QF-amphibolites and quartz-deficient, locally talc-, chlorite-, and/or Mg-amphibole-bearing TC-amphibolites. Some workers divide TC-amphibolites into Todd and Edmonds types, based on mineral and geochemical differences, and we provisionally add a third type – olivine ± pyroxene-rich, Rich Mountain-type rocks. Regionally, MUR bodies range from equant, Rich Mountain- to highly elongate, Todd-TC-amphibolite-type bodies. The MURs exhibit three to five mineral associations containing assemblages with olivine, anthophyllitic amphibole, Mg-hornblende, Mg-actinolite, cummingtonite, and serpentine representing decreasing eclogite to greenschist facies grades of metamorphism over time. MUR protoliths are difficult to determine. Southwestern MUR bodies have remnant olivine ± pyroxene-rich assemblages representing ultrabasic-basic, dunite-peridotite-pyroxenite protoliths. Northeastern TC-amphibolite MURs contain hornblende and actinolitic amphiboles plus chlorites – aluminous and calcic assemblages suggesting to some that metasomatism of basic, QF-amphibolites yields all TC-amphibolites. Yet MgO-CaO-Al 2 O 3 and trace element chemistries of many TC-amphibolites resemble compositions of plagioclase peridotites. We show that a few AMS TC-amphibolites had basaltic/gabbroic protoliths, while presenting arguments opposing application of the metasomatic hypothesis to all TC-amphibolites. We establish that MUR bodies are petrologically heterolithic and that TC-amphibolites are in contact with many rock types; that those with high Cr, Ni, and Mg have olivine- or pyroxene-dominated protoliths; that most exhibit three or more metamorphic mineral associations; and that contacts thought to be metasomatic are structural. Clearly, different MUR bodies have different chemistries representing various protoliths, and have different mineral assemblages, reflecting both chemical composition and metamorphic history. Spot sampling of heterolithic MUR bodies does not reveal MUR body character or history or allow ‘type’ designations. We recommend that the subdivision of MUR bodies into ‘types’ be abandoned and that the metasomatic hypothesis be carefully applied. AMS MURs and associated metamafic rocks likely represent fragments of dismembered ophiolites from various ophiolite types.

North Carolina↗

USGS2010

Tertiary volcanic rocks from the southern Pannonian Basin, Croatia

The Tertiary volcanic rocks of the southern part of the Pannonian Basin are related to a sequence of tectonic events that occurred along the northern margin of the Dinarides when subduction ceased and after uplift of the region in middle Eocene time. The oldest rocks are andesites and dacites erupted during an Egerian to Eggenburgian marine transpression phase. In early Miocene time (about 17 Ma), rifting started, probably caused by the rise of the mantle, resulting in E-W extension and strike-slip faulting leading to formation of the Pannonian Basin. The initial rifting was accompanied by trachyandesitic volcanism of Karpathian age, followed by Badenian-age (15 to 13 Ma) volcanic activity producing basalts, andesites, and dacites. During these volcanic phases the Pannonian Basin, or the Paratethys, probably was periodically connected with the Mediterranean Sea. The final period of volcanism (about 9 to 7 Ma) produced alkalic basalts and basalts and occurred in fresh-water environments. These volcanic rocks have had a complex petrological evolution, related to an active continental margin. Egerian-Eggenburgian andesites and dacites can be explained by upper crustal assimilation with fractional crystallization (ACF) of primary basalt magma. The three younger associations originated by partial melting of rocks from both the upper mantle and the lower crust. Their evolution was accompanied by crustal contamination.

Carpathian Basin, Pannonian Basin↗

USGS2010

El Salvador, Chile porphyry copper deposit revisited: Geologic and geochronologic framework

The Eocene (42 to 41 Ma) El Salvador porphyry copper deposit in the Indio Muerto district, northern Chile (26° 15′ S Lat.), formerly thought to have formed at the culmination of a 9-m.y. period of episodic magmatism, is shown by new mapping, U-Pb and K-Ar geochronology, and petrologic data to have formed during the younger of two distinct but superposed magmatic events-a Paleocene (∼63 to 58 Ma) and an Eocene (44 to 41 Ma) event. In the district, high-K Paleocene volcano-plutonic activity was characterized by a variety of eruptive styles and magmatic compositions, including a collapse caldera associated with explosive rhyolitic magmatism (El Salvador trapdoor caldera), a post-collapse rhyolite dome field (Cerro Indio Muerto), and andesitic-trachyandesitic stratovolcanos (Kilometro Catorce-Los Amarillos sequence). Pre-caldera basement faults were reactivated during Paleocene volcanism as part of the collapse margin of the caldera. Beneath Cerro Indio Muerto, where the porphyry Cu deposit subsequently formed, the intersection of two major basement faults and the NNE-striking rotational axis of tilted ignimbrites of the Paleocene El Salvador caldera localized emplacement of post-collapse rhyolite domes and peripheral dikes and sills. Subsequent Eocene rhyolitic and granodioritic-dacitic porphyries intruded ~14 m.y. after cessation of Paleocene magmatism along the same NNE-striking structural belt through Cerro Indio Muerto as did the post-collapse Paleocene rhyolite domes. Eocene plutonism over a 3-m.y. period was contemporaneous with NW-SE-directed shortening associated with regional sinistral transpression along the Sierra Castillo fault, lying ∼10 km to the east. Older Eocene rhyolitic porphyries in the Indio Muerto district were emplaced between 44 and 43 Ma, and have a small uneconomic Cu center associated with a porphyry at Old Camp. The oldest granodioritic-dacitic porphyries also were emplaced at ∼44 to 43 Ma, but their petrogenetic relation to the rhyolitic porphyries and younger granodioritic-dacitic porphyries in the district is unclear. The main porphyry Cu-Mo-related granodioritic-dacitic stocks in Quebrada Turquesa on Cerro Indio Muerto intruded, cooled, and were mineralized within ∼1 m.y. between 42 and 41 Ma. Volumetrically minor late- to post-mineral porphyries are slightly more mafic than earlier granodioritic-dacitic porphyries, a compositional trend possibly repeated on several scales and more than once over the 3-million-year Eocene magmatic history of the Indio Muerto district. This compositional trend requires either addition of basaltic material into an open-system silicic magma chamber or tapping of progressively deeper levels of a vertically zoned magma chamber. Eocene porphyry magmas were more hydrous and their residual source mineralogy richer in garnet than the relatively anhydrous Paleocene rocks, whose source was rich in pyroxene. The presence of inherited zircons in Paleocene and Eocene rocks requires interaction with crustal rocks of Paleozoic and/or Proterozoic age.

International Geology Review↗

USGS1971

Remanent magnetization and susceptibility of late Cenozoic rocks from New Zealand

Measurements of magnetic remanence and susceptibility were made on 176 samples of volcanic rocks from 22 late Cenozoic formations from the North Island. Intensities of remanence, susceptibilities, and Q ratios are highly variable in both the ignimbrites and andesites and their ranges overlap, indicating that the magnetic anomalies produced by ignimbrite bodies would be difficult to distinguish from those produced by andesite flows. An analysis of the directions of magnetization of the ignimbrites indicates that groups of petrologically distinct ignimbrites probably formed during the same volcanic episode.

North Island↗

USGS2024

Detrital zircons and the magmatic history of Viti Levu, Fiji

We integrate the existing detrital zircon data from multiple modern river sediment samples on Viti Levu, Fiji, with the most current available geological and topographic mapping of the respective river drainage basins to compare detrital populations with potential bedrock sources. The temporal and spatial variations in zircon geochemistry supplement what is known from igneous rocks and confirm the petrological differences between plutonic and volcanic rocks from the Eocene to early Oligocene (Yavuna age, >30 Ma), middle Oligocene to middle Miocene (Wainimala age, 30–12.5 Ma), late Miocene (Colo age, 12.5–6.5 Ma) and latest Miocene (Namosi age, 6.5–5 Ma). The >30 Ma Yavuna-age zircons are restricted to areas that drain the previously mapped Yavuna Group. The 30–12.5 Ma zircons are found across central Viti Levu from west to east, and the 30–15 Ma zircons have distinctively low U/Yb and high Dy/Yb ratios. They are the best radiometric evidence of widespread early to middle Miocene arc magmatism in Fiji that was relatively U-poor. Peak deconvolution of the Colo age zircons from individual basins suggests the following ages for undated or poorly dated plutons from central Viti Levu. The large Mavuvu pluton is probably composed of multiple intrusions in the 12–10 Ma range, the Waiqa pluton is probably ca 10 Ma, and the Noikoro pluton is probably ca 9 Ma. There are zircons from unknown plutonic or volcanic sources between 8 and 7 Ma in western Viti Levu that have distinct Eu/Eu* ratios. We attribute the highest U/Yb ratios in some Colo age zircons to crustal anatexis. Namosi-age zircons are abundant in the Medrausucu Group and can be found scattered across Viti Levu.

Viti Levu↗

USGS2014

Science applications of a multispectral microscopic imager for the astrobiological exploration of Mars

Future astrobiological missions to Mars are likely to emphasize the use of rovers with in situ petrologic capabilities for selecting the best samples at a site for in situ analysis with onboard lab instruments or for caching for potential return to Earth. Such observations are central to an understanding of the potential for past habitable conditions at a site and for identifying samples most likely to harbor fossil biosignatures. The Multispectral Microscopic Imager (MMI) provides multispectral reflectance images of geological samples at the microscale, where each image pixel is composed of a visible/shortwave infrared spectrum ranging from 0.46 to 1.73 μ m. This spectral range enables the discrimination of a wide variety of rock-forming minerals, especially Fe-bearing phases, and the detection of hydrated minerals. The MMI advances beyond the capabilities of current microimagers on Mars by extending the spectral range into the infrared and increasing the number of spectral bands. The design employs multispectral light-emitting diodes and an uncooled indium gallium arsenide focal plane array to achieve a very low mass and high reliability. To better understand and demonstrate the capabilities of the MMI for future surface missions to Mars, we analyzed samples from Mars-relevant analog environments with the MMI. Results indicate that the MMI images faithfully resolve the fine-scale microtextural features of samples and provide important information to help constrain mineral composition. The use of spectral endmember mapping reveals the distribution of Fe-bearing minerals (including silicates and oxides) with high fidelity, along with the presence of hydrated minerals. MMI-based petrogenetic interpretations compare favorably with laboratory-based analyses, revealing the value of the MMI for future in situ rover-mediated astrobiological exploration of Mars.

Astrobiology↗

USGS2020

Mariana serpentinite mud volcanism exhumes subducted seamount materials: Implications for the origin of life

The subduction of seamounts and ridge features at convergent plate boundaries plays an important role in the deformation of the overriding plate and influences geochemical cycling and associated biological processes. Active serpentinization of forearc mantle and serpentinite mud volcanism on the Mariana forearc (between the trench and active volcanic arc) provides windows on subduction processes. Here, we present (1) the first observation of an extensive exposure of an undeformed Cretaceous seamount currently being subducted at the Mariana Trench inner slope; (2) vertical deformation of the forearc region related to subduction of Pacific Plate seamounts and thickened crust; (3) recovered Ocean Drilling Program and International Ocean Discovery Program cores of serpentinite mudflows that confirm exhumation of various Pacific Plate lithologies, including subducted reef limestone; (4) petrologic, geochemical and paleontological data from the cores that show that Pacific Plate seamount exhumation covers greater spatial and temporal extents; (5) the inference that microbial communities associated with serpentinite mud volcanism may also be exhumed from the subducted plate seafloor and/or seamounts; and (6) the implications for effects of these processes with regard to evolution of life.

Philosophical Transactions of the Royal Society A:↗

USGS2007

A three-dimensional geophysical model of the crust in the Barents Sea region: Model construction and basement characterization

BARENTS50, a new 3-D geophysical model of the crust in the Barents Sea Region has been developed by the University of Oslo, NORSAR and the U.S. Geological Survey. The target region comprises northern Norway and Finland, parts of the Kola Peninsula and the East European lowlands. Novaya Zemlya, the Kara Sea and Franz-Josef Land terminate the region to the east, while the Norwegian-Greenland Sea marks the western boundary. In total, 680 1-D seismic velocity profiles were compiled, mostly by sampling 2-D seismic velocity transects, from seismic refraction profiles. Seismic reflection data in the western Barents Sea were further used for density modelling and subsequent density-to-velocity conversion. Velocities from these profiles were binned into two sedimentary and three crystalline crustal layers. The first step of the compilation comprised the layer-wise interpolation of the velocities and thicknesses. Within the different geological provinces of the study region, linear relationships between the thickness of the sedimentary rocks and the thickness of the remaining crystalline crust are observed. We therefore, used the separately compiled (area-wide) sediment thickness data to adjust the total crystalline crustal thickness according to the total sedimentary thickness where no constraints from 1-D velocity profiles existed. The BARENTS50 model is based on an equidistant hexagonal grid with a node spacing of 50 km. The P -wave velocity model was used for gravity modelling to obtain 3-D density structure. A better fit to the observed gravity was achieved using a grid search algorithm which focussed on the density contrast of the sediment-basement interface. An improvement compared to older geophysical models is the high resolution of 50 km. Velocity transects through the 3-D model illustrate geological features of the European Arctic. The possible petrology of the crystalline basement in western and eastern Barents Sea is discussed on the basis of the observed seismic velocity structure. The BARENTS50 model is available at http://www.norsar.no/seismology/barents3d/ .

Geophysical Journal International↗

USGS2009

Constraints on the depth of generation and emplacement of a magmatic epidote-bearing quartz diorite pluton in the Coast Plutonic Complex, British Columbia

Petrology and P–T estimates indicate that a magmatic epidote-bearing quartz diorite pluton from Mt. Gamsby, Coast Plutonic Complex, British Columbia, was sourced at pressures below ∼1.4 GPa and cooled nearly isobarically at ∼0.9 GPa. The P–T path indicates that the magma was within the stability field of magmatic epidote early and remained there upon final crystallization. The pluton formed and crystallized at depths greater than ∼30 km. REE data indicate that garnet was absent in the melting region and did not fractionate during crystallization. This suggests that the crust was less than or equal to ∼55 km thick at 188 Ma during the early phases of magmatism in the Coast Plutonic Complex. Late Cretaceous contractional deformation and early Tertiary extension exhumed the rocks to upper crustal levels. Textures of magmatic epidote and other magmatic phases, combined with REE data, can be important for constraining the P–T path followed by magmas.

British Columbia↗

USGS2011

Overpressure generation by load transfer following shale framework weakening due to smectite diagenesis

Basin model studies which have addressed the importance of smectite conversion to illite as a source of overpressure in the Gulf of Mexico have principally relied on a single‐shale compaction model and treated the smectite reaction as only a fluid‐source term. Recent fluid pressure interpretation and shale petrology studies indicate that conversion of bound water to mobile water, dissolution of load‐bearing grains, and increased preferred orientation change the compaction properties of the shale. This results in substantial changes in effective stress and fluid pressure. The resulting fluid pressure can be 1500–3000 psi higher than pressures interpreted from models based on shallow compaction trends. Shale diagenesis changes the mineralogy, volume, and orientation of the load‐bearing grains in the shale as well as the volume of bound water. This process creates a weaker (more compactable) grain framework. When these changes occur without fluid export from the shale, some of the stress is transferred from the grains onto the fluid. Observed relationships between shale density and calculated effective stress in Gulf of Mexico shelf wells confirm these changes in shale properties with depth. Further, the density–effective stress changes cannot be explained by fluid‐expansion or fluid‐source processes or by prediagenesis compaction, but are consistent with a dynamic diagenetic modification of the shale mineralogy, texture, and compaction properties during burial. These findings support the incorporation of diagenetic modification of compaction properties as part of the fluid pressure interpretation process.

Geofluids↗

USGS2007

On the formation of granulites

The tectonic settings for the formation and evolution of regional granulite terranes and the lowermost continental crust can be deduced from pressure–temperature–time ( P–T –time) paths and constrained by petrological and geophysical considerations. P–T conditions deduced for regional granulites require transient, average geothermal gradients of greater than 35°C km −1 , implying minimum heat flow in excess of 100 mWm −2 . Such high heat flow is probably caused by magmatic heating. Tectonic settings wherein such conditions are found include convergent plate margins, continental rifts, hot spots and at the margins of large, deep-seated batholiths. However, particular P–T –time paths do not allow specific tectonic settings to be distinguished at this time. Under different conditions, both clockwise, CW ( P max attained before T max ), and anticlockwise, ACW ( P max attained slightly after T max ), paths are possible in the same tectonic setting. Both CW and ACW end-member paths can yield nearly isobaric cooling, IBC, paths. Such cooling paths are clearly not an artefact of thermobarometry, but can be constrained by solid–solid and devolatilization equilibria and geophysical modelling. In terms of understanding the evolution of the deep crust, a potentially significant group of regional granulite terranes are those that show evidence for ACW-IBC paths. Such paths are the likely result of: (i) episodic igneous activity resulting in intrusions within all levels of the crust, (ii) thickening of the crust by magmatic underplating, (iii) slow uplift as a result of the formation of a deep, garnet-rich crustal root and (iv) excavation resulting from a later tectonic event unrelated to that resulting in the formation of the granulites. The later event might be triggered by the delamination of the garnet-rich, lowermost crust.

Journal of Metamorphic Geology↗