Search USGS⌕ Search

SEARCH · Search USGS

Results for “Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources
USGS2021

Comparing geometric differences between Landsat Collection 1 to Collection 2 level-1 products

In late 2020 the U.S. Geological Survey (USGS) began the distribution of Landsat products associated with their collection 2 reprocessing of the archive. Several changes were implemented within the Landsat Product Generation System (LPGS) and the calibration parameters applied to the Landsat imagery for the collection 2 processing. When comparing between collection 1 and collection 2 products, radiometric and geometric differences will be present. One of the most substantial changes between the two collections was an adjustment to the ground control which made the control more accurate from an absolute and relative perspective. Some of the other changes associated with collection 2 processing were to the Digital Elevation Model (DEM) used in terrain correction, the Thermal Infrared Sensor (TIRS) relative gains, TIRS absolute calibration, Operational Land Imagery (OLI) absolute gain model, OLI relative gain, and OLI bias calculation to name a few. Although these changes also have an effect on the differences between the product associated with these two collections, the change in the ground control, although typically less than one 30-meter multispectral pixel in magnitude, will have the largest effect on the differences between the products. This change in ground control is also a spatially dynamic change that although is low in spatial frequency, is nonlinear and is not a change that can be modeled on a global or even on a local Worldwide Reference System-2 (WRS-2) path and row scale. The effects of these ground control changes will be discussed and demonstrated within this paper along with examples showing their effect on specific datasets. This paper demonstrates some of these geometric differences associated with the ground control through both the registration statistics created during product generation and through an example comparison of a set of collection 1 and collection 2 products.

Conference Paper↗
USGS2004

Visual enhancement of unmixed multispectral imagery using adaptive smoothing

Adaptive smoothing (AS) has been previously proposed as a method to smooth uniform regions of an image, retain contrast edges, and enhance edge boundaries. The method is an implementation of the anisotropic diffusion process which results in a gray scale image. This paper discusses modifications to the AS method for application to multi-band data which results in a color segmented image. The process was used to visually enhance the three most distinct abundance fraction images produced by the Lagrange constraint neural network learning-based unmixing of Landsat 7 Enhanced Thematic Mapper Plus multispectral sensor data. A mutual information-based method was applied to select the three most distinct fraction images for subsequent visualization as a red, green, and blue composite. A reported image restoration technique (partial restoration) was applied to the multispectral data to reduce unmixing error, although evaluation of the performance of this technique was beyond the scope of this paper. The modified smoothing process resulted in a color segmented image with homogeneous regions separated by sharpened, coregistered multiband edges. There was improved class separation with the segmented image, which has importance to subsequent operations involving data classification.

Conference Paper↗
USGS2007

Consistency of L4 TM absolute calibration with respect to the L5 TM sensor based on near-simultaneous image acquisition

The Landsat archive provides more than 35 years of uninterrupted multispectral remotely sensed data of Earth observations. Since 1972, Landsat missions have carried different types of sensors, from the Return Beam Vidicon (RBV) camera to the Enhanced Thematic Mapper Plus (ETM+). However, the Thematic Mapper (TM) sensors on Landsat 4 (L4) and Landsat 5 (L5), launched in 1982 and 1984 respectively, are the backbone of an extensive archive. Effective April 2, 2007, the radiometric calibration of L5 TM data processed and distributed by the U.S. Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) was updated to use an improved lifetime gain model, based on the instrument's detector response to pseudo-invariant desert site data and cross-calibration with the L7 ETM+. However, no modifications were ever made to the radiometric calibration procedure of the Landsat 4 (L4) TM data. The L4 TM radiometric calibration procedure has continued to use the Internal Calibrator (IC) based calibration algorithms and the post calibration dynamic ranges, as previously defined. To evaluate the "current" absolute accuracy of these two sensors, image pairs from the L5 TM and L4 TM sensors were compared. The number of coincident image pairs in the USGS EROS archive is limited, so the scene selection for the cross-calibration studies proved to be a challenge. Additionally, because of the lack of near-simultaneous images available over well-characterized and traditionally used calibration sites, alternate sites that have high reflectance, large dynamic range, high spatial uniformity, high sun elevation, and minimal cloud cover were investigated. The alternate sites were identified in Yuma, Iraq, Egypt, Libya, and Algeria. The cross-calibration approach involved comparing image statistics derived from large common areas observed eight days apart by the two sensors. This paper summarizes the average percent differences in reflectance estimates obtained between the two sensors. The work presented in this paper is a first step in understanding the current performance of L4 TM absolute calibration and potentially serves as a platform to revise and improve the radiometric calibration procedures implemented for the processing of L4 TM data.

Conference Paper↗
USGS2008

Development of landsat-5 thematic mapper internal calibrator gain and offset table

The National Landsat Archive Production System (NLAPS) has been the primary processing system for Landsat data since U.S. Geological Survey (USGS) Earth Resources Observation and Science Center (EROS) started archiving Landsat data. NLAPS converts raw satellite data into radiometrically and geometrically calibrated products. NLAPS has historically used the Internal Calibrator (IC) to calibrate the reflective bands of the Landsat-5 Thematic Mapper (TM), even though the lamps in the IC were less stable than the TM detectors, as evidenced by vicarious calibration results. In 2003, a major effort was made to model the actual TM gain change and to update NLAPS to use this model rather than the unstable IC data for radiometric calibration. The model coefficients were revised in 2007 to reflect greater understanding of the changes in the TM responsivity. While the calibration updates are important to users with recently processed data, the processing system no longer calculates the original IC gain or offset. For specific applications, it is useful to have a record of the gain and offset actually applied to the older data. Thus, the NLAPS calibration database was used to generate estimated daily values for the radiometric gain and offset that might have been applied to TM data. This paper discusses the need for and generation of the NLAPSIC gain and offset tables. A companion paper covers the application of and errors associated with using these tables.

Conference Paper↗
USGS2008

L5 TM radiometric recalibration procedure using the internal calibration trends from the NLAPS trending database

From the Landsat program's inception in 1972 to the present, the earth science user community has benefited from a historical record of remotely sensed data. The multispectral data from the Landsat 5 (L5) Thematic Mapper (TM) sensor provide the backbone for this extensive archive. Historically, the radiometric calibration procedure for this imagery used the instrument's response to the Internal Calibrator (IC) on a scene-by-scene basis to determine the gain and offset for each detector. The IC system degraded with time causing radiometric calibration errors up to 20 percent. In May 2003 the National Landsat Archive Production System (NLAPS) was updated to use a gain model rather than the scene acquisition specific IC gains to calibrate TM data processed in the United States. Further modification of the gain model was performed in 2007. L5 TM data that were processed using IC prior to the calibration update do not benefit from the recent calibration revisions. A procedure has been developed to give users the ability to recalibrate their existing Level-1 products. The best recalibration results are obtained if the work order report that was originally included in the standard data product delivery is available. However, many users may not have the original work order report. In such cases, the IC gain look-up table that was generated using the radiometric gain trends recorded in the NLAPS database can be used for recalibration. This paper discusses the procedure to recalibrate L5 TM data when the work order report originally used in processing is not available. A companion paper discusses the generation of the NLAPS IC gain and bias look-up tables required to perform the recalibration.

Conference Paper↗
USGS2005

Coal systems analysis: A new approach to the understanding of coal formation, coal quality and environmental considerations, and coal as a source rock for hydrocarbons

Coal is an important and required energy source for today's world. Current rates of world coal consumption are projected to continue at approximately the same (or greater) levels well into the twenty-first century. This paper will provide an introduction to the concept of coal systems analysis and the accompanying volume of papers will provide examples of how coal systems analysis can be used to understand, characterize, and evaluate coal and coal gas resources. Coal systems analysis incorporates the various disciplines of coal geology to provide a complete characterization of the resource. The coal system is divided into four stages: (1) accumulation, (2) preservation-burial, (3) diagenesis-coalification, and (4) coal and hydrocarbon resources. These stages are briefly discussed and key references and examples of the application of coal systems analysis are provided.

Special Papers of the Geological Society of Americ↗
USGS2010

Geologic map of Lake Mead and surrounding regions, southern Nevada, southwestern Utah, and northwestern Arizona

Regional stratigraphic units and structural features of the Lake Mead region are presented as a 1:250,000 scale map, and as a Geographic Information System database. The map, which was compiled from existing geologic maps of various scales, depicts geologic units, bedding and foliation attitudes, faults and folds. Units and structural features were generalized to highlight the regional stratigraphic and tectonic aspects of the geology of the Lake Mead region. This map was prepared in support of the papers presented in this volume, Special Paper 463, as well as to facilitate future investigations in the region. Stratigraphic units exposed within the area record 1800 million years of geologic history and include Proterozoic crystalline rocks, Paleozoic and Mesozoic sedimentary rocks, Mesozoic plutonic rocks, Cenozoic volcanic and intrusive rocks, sedimentary rocks and surficial deposits. Following passive margin sedimentation in the Paleozoic and Mesozoic, late Mesozoic (Sevier) thrusting and Late Cretaceous and early Tertiary compression produced major folding, reverse faulting, and thrust faulting in the Basin and Range, and resulted in regional uplift and monoclinal folding in the Colorado Plateau. Cenozoic extensional deformation, accompanied by sedimentation and volcanism, resulted in large-magnitude high- and low-angle normal faulting and strike-slip faulting in the Basin and Range; on the Colorado Plateau, extension produced north-trending high-angle normal faults. The latest history includes integration of the Colorado River system, dissection, development of alluvial fans, extensive pediment surfaces, and young faulting. Stratigraphic units exposed within the area record 1800 million years of geologic history and include Proterozoic crystalline rocks, Paleozoic and Mesozoic sedimentary rocks, Mesozoic plutonic rocks, Cenozoic volcanic and intrusive rocks, sedimentary rocks and surfi cial deposits. Following passive margin sedimentation in the Paleozoic and Mesozoic, late Mesozoic (Sevier) thrusting and Late Cretaceous and early Tertiary compression produced major folding, reverse faulting, and thrust faulting in the Basin and Range, and resulted in regional uplift and monoclinal folding in the Colorado Plateau. Cenozoic extensional deformation, accompanied by sedimentation and volcanism, resulted in large-magnitude high- and low-angle normal faulting and strike-slip faulting in the Basin and Range; on the Colorado Plateau, extension produced north-trending high-angle normal faults. The latest history includes integration of the Colorado River system, dissection, development of alluvial fans, extensive pediment surfaces, and young faulting.

Arizona, Nevada, Utah↗
USGS2022

Modeling reservoir release using pseudo-prospective learning and physical simulations to predict water temperature

This paper proposes a new data-driven method for predicting water temperature in stream networks with reservoirs. The water flows released from reservoirs greatly affect the water temperature of downstream river segments. However, the information of released water flow is often not available for many reservoirs, which makes it difficult for data-driven models to capture the impact to downstream river segments. In this paper, we first build a state-aware graph model to represent the interactions amongst streams and reservoirs, and then propose a parallel learning structure to extract the reservoir release information and use it to improve the prediction. In particular, for reservoirs with no available release information, we mimic the water managers' release decision process through a pseudo-prospective learning method, which infers the release information from anticipated water temperature dynamics. For reservoirs with the release information, we leverage a physics-based model to simulate the water release temperature and transfer such information to guide the learning process for other reservoirs. The evaluation for the Delaware River Basin shows that the proposed method brings over 10% accuracy improvement over existing data-driven models for stream temperature prediction when the release data is not available for any reservoirs. The performance is further improved after we incorporate the release data and physical simulations for a subset of reservoirs.

Conference Paper↗
USGS2006

Biodiversity management of fens and fen meadows by grazing, cutting and burning

Question: Can the biodiversity of fens in Europe and North America be maintained through the use of grazing (especially cattle grazing), fire, and/or cutting? Location: European and North American fens. Methods: This paper is a review of the literature on the effects of grazing, fire and cutting on fens, to explore the relationship between management and biodiversity in fens. Results: A reduction of cattle grazing, mowing and burning in fens has led to a reduction in biodiversity in fens. The vegetation of abandoned fens shifts to trees and shrubs after 10-15 years, which shade the smaller and rarer species of these wetlands. While careful use of fire is used to manage fens in North America, it is not widely used in European fens, perhaps because the peat of drained fens may catch fire. Cattle grazing cannot be considered a natural disturbance in North America, since cattle did not evolve on that continent. In Europe, cattle do not generally graze in unaltered fens, but they do use slightly drained fen meadows. Conclusions: Three approaches have been used to control the dominance of tall woody and herbaceous species in abandoned fens, including the re-introduction of cattle, mowing, and burning. Overgrazing results in a permanent reduction in biodiversity, therefore cattle re-introduction must be approached cautiously. In Europe, but not in North America, mowing has been an important management tool, and mowing has been successful in maintaining species richness, particularly in fens that have been mowed annually for centuries. Fire has been the most common and successful management tool in North America although it is not effective in removing shrubs that have become large. Because the problems and solutions are similar, the literature of both European and North American fen management can be analyzed to better assess the management of fens on both continents. Many management questions require further study and these are listed in the paper. ?? IAVS; Opulus Press.

Conference Paper↗
USGS1969

Flow of a disperse emulsion of crude oil in water in porous media

It has been suggested that oil migrates through reservoir sands in the form of a fine, disperse emulsion of oil in water, and that oil accumulations occur where the stream enters finer-grained rock such as silt or shale. In order to investigate the possible mechanisms, stable emulsions of oil in water were prepared without the use of wetting agents. They consisted of droplets 1/2 to 1-1/2 microns in diameter, in a concentration of 20 to 40 parts of oil per million of water. These emulsions passed freely through filter paper and ordinary passed freely through filter paper and ordinary sand. A plastic tube containing glass beads of 200-microns diameter included a bed 1/2-cm thick of crushed beads 37 to 88 microns in diameter. When the emulsion was passed through this tube, up to 80 percent of the oil was screened out at the coarse-fine interface. The amount removed depended on the contrast in grain size, the nature and the preferential wettability of the media. Similar results occurred when quartz sand was used as the coarse, and crushed sand as the fine medium. This screening did not occur as a result of capillary effects., because the pores were many times the diameter of the droplets. The oil collected as a result of flocculation of the droplets into strings and clusters., and the oil saturation in the pores consisted of masses of droplets with very little coalescence. Possibly electrostatic forces are more important Possibly electrostatic forces are more important than capillary in the behavior of fine, disperse, oil-in-water emulsions. our current ideas on multiphase flow in porous media may not apply to disperse emulsions.

Conference Paper↗
USGS1977

Proceedings of the first annual William Pecora Memorial Symposium, October 1975, Sioux Falls, South Dakota

The U.S. Geological Survey agreed to publish the proceeding of the first annual William T. Pecora Memorial Symposium in its Professional Paper series because the subject material is related to the mission of the Survey. The usual standards for this series have been modified to accommodate the variety of styles used by the participants in this symposium. All color illustrations are placed at the front of the book for economy in printing. They are identified by the names of the authors of the papers from which they are extracted.

Professional Paper↗
USGS1917

The Helderberg limestone of central Pennsylvania

This paper presents the results of a study made during 1913, 1914, and 1915, while the writer was a student at Johns Hopkins University. The formations discussed have been studies in Maryland, New Jersey, and New York, and described with more or less detail, but concerning their occurrence in the intervening area in Pennsylvania little exact information has been available. The conflict in opinion as to the proper position and correlation of the Keyser limestone and as to the interpretation of some of the standard New York sections has made further data very desirable, and the present paper is an attempt to meet a part of the deficiency.

Pennsylvania↗
USGS1903

Drainage modifications in southeastern Ohio and adjacent parts of West Virginia and Kentucky

The field work upon which this paper is based was carried on intermittently for several years. During the season of 1899 the work in Washington County, Ohio, was conducted under the direction of the Ohio State Academy of Science, the expenses being covered by a grant from the Emerson McMillin special research fund. The field work of the season of 1900 was done under the direction of Dr. T. C. Chamberlin, chief of the Division of Pleistocene Geology of the United States Geological Survey, and to him the author is greatly indebted for many valuable suggestions in relation to the work, and for an extended correspondence concerning the interpretations, during the preparation of this report. The study of this particular region was the natural result of earlier studies of drainage modifications in Ohio, in the region more nearly adjacent to the glaciated area. Until a few years ago but very little systematic study of the drainage features of Ohio had been made. It is not intended at present to make a complete review of the early literature, but to refer only to such portions of it as bear directly on the problem in hand. On account of the lack of good maps of Ohio it has not been possible to make the maps which accompany this paper as accurate as might be desired. They have been constructed from various published maps and from personal observations in the field; and, while they are not strictly accurate, it is hoped that they will set forth the facts with reference to the drainage modifications with sufficient clearness to enable anyone to follow the features in the field, or to serve for purposes of correlation. The map of Flatwoods and Teays valleys has been constructed from four topographic sheets of the United States Geological Survey Ironton, Kenova, Huntington, and Charleston. The author is under obligations to Mr. H. M. Wilson, geographer of the Survey, for data furnished from the unpublished map of the Kenova quadrangle. The photographs illustrating the report were all taken by the author.

Kentucky, Ohio, West Virginia↗
USGS1923

The fauna of the so-called Dakota formation of northern central Colorado and its equivalent in southeastern Wyoming

This paper describes a small fauna from beds in northern central Colorado that have long been designated the Dakota formation, often with doubt that all the beds so named were really equivalent to the typical Dakota sandstone of eastern Nebraska. The upper part of the equivalent beds in southeastern Wyoming was referred by some writers to the Benton Shale and the lower part of the Cloverly formation. This so-called Dakota formation of northern central Colorado and its equivalent in southeastern Wyoming consist of cherty conglomerate, brown quartzose sandstone, and dark shale. The conglomerate is usually at the base of the series and at many localities is overlain by a single shale unit and that in turn by a sandstone. At other localities, however, there are several alternations of sandstone and shale above the basal conglomeratic layer. The fossil described in this paper, except one specimen, were obtained from the shales of the middle part of the formation. The single specimen, an ammonite, came from the uppermost sandstone.

Colorado;Wyoming↗
USGS1926

The molluscan fauna of the Alum Bluff group of Florida, Part II, Astartacea, Carditacea, Chamacea

The first of the series of papers upon the Mollusca of the Alum Bluff group covered the orders of the Prionodesmacea and the Anomalodesmacea. The Mollusca were by the beginning of Miocene time so far advances in development that the great majority are included under the highest of the three orders, the Teleodesmacea, characterized in the adult stages by the differentiation of the hinge teeth into distinct cardinals and laterals. This paper, the second of the series, covers the most primitive of the Teleodesmacea in the Alum Bluff group. All three of the superfamilies considered - the Astartacea, the Carditaeea, and the Chamacea-are included under Dall's group of the Diogenodonta, which is characterized in the normal forms by one or two laterals and not more than three cardinals. The Carditacea are very closely related to the Astartacea in hinge armature but differ in the development of a pronounced radial sculpture. The Chamacea have until recently been considered an offshooting group from the Carditacea that have been greatly modified by their sessile habit. Some doubt has been thrown upon this relationship by the late morphologic studies of Odhner.

Florida↗
USGS1993

Applications of research from the U.S. Geological Survey program, assessment of regional earthquake hazards and risk along the Wasatch Front, Utah

INTERACTIVE WORKSHOPS: ESSENTIAL ELEMENTS OF THE EARTHQUAKE HAZARDS RESEARCH AND REDUCTION PROGRAM IN THE WASATCH FRONT, UTAH: Interactive workshops provided the forum and stimulus necessary to foster collaboration among the participants in the multidisciplinary, 5-yr program of earthquake hazards reduction in the Wasatch Front, Utah. The workshop process validated well-documented social science theories on the importance of interpersonal interaction, including interaction between researchers and users of research to increase the probability that research will be relevant to the user's needs and, therefore, more readily used. REDUCING EARTHQUAKE HAZARDS IN UTAH: THE CRUCIAL CONNECTION BETWEEN RESEARCHERS AND PRACTITIONERS: Complex scientific and engineering studies must be translated for and transferred to nontechnical personnel for use in reducing earthquake hazards in Utah. The three elements needed for effective translation, likelihood of occurrence, location, and severity of potential hazards, and the three elements needed for effective transfer, delivery, assistance, and encouragement, are described and illustrated for Utah. The importance of evaluating and revising earthquake hazard reduction programs and their components is emphasized. More than 30 evaluations of various natural hazard reduction programs and techniques are introduced. This report was prepared for research managers, funding sources, and evaluators of the Utah earthquake hazard reduction program who are concerned about effectiveness. An overview of the Utah program is provided for those researchers, engineers, planners, and decisionmakers, both public and private, who are committed to reducing human casualties, property damage, and interruptions of socioeconomic systems. PUBLIC PERCEPTIONS OF THE IMPLEMENTATION OF EARTHQUAKE MITIGATION POLICIES ALONG THE WASATCH FRONT IN UTAH: The earthquake hazard potential along the Wasatch Front in Utah has been well defined by a number of scientific and engineering studies. Translated earthquake hazard maps have also been developed to identify areas that are particularly vulnerable to various causes of damage such as ground shaking, surface rupturing, and liquefaction. The implementation of earthquake hazard reduction plans are now under way in various communities in Utah. The results of a survey presented in this paper indicate that technical public officials (planners and building officials) have an understanding of the earthquake hazards and how to mitigate the risks. Although the survey shows that the general public has a slightly lower concern about the potential for economic losses, they recognize the potential problems and can support a number of earthquake mitigation measures. The study suggests that many community groups along the Wasatch Front, including volunteer groups, business groups, and elected and appointed officials, are ready for action-oriented educational programs. These programs could lead to a significant reduction in the risks associated with earthquake hazards. A DATA BASE DESIGNED FOR URBAN SEISMIC HAZARDS STUDIES: A computerized data base has been designed for use in urban seismic hazards studies conducted by the U.S. Geological Survey. The design includes file structures for 16 linked data sets, which contain geological, geophysical, and seismological data used in preparing relative ground response maps of large urban areas. The data base is organized along relational data base principles. A prototype urban hazards data base has been created for evaluation in two urban areas currently under investigation: the Wasatch Front region of Utah and the Puget Sound area of Washington. The initial implementation of the urban hazards data base was accomplished on a microcomputer using dBASE III Plus software and transferred to minicomputers and a work station. A MAPPING OF GROUND-SHAKING INTENSITIES FOR SALT LAKE COUNTY, UTAH: This paper documents the development of maps showing a

Professional Paper↗
USGS1995

Geophysical setting of the Reelfoot Rift and relations between rift structures and the New Madrid seismic zone

In the winter of 1811-12, three of the largest historic earthquakes in the United States occurred near New Madrid, Missouri. Seismicity continues to the present day throughout a tightly clustered pattern of epicenters centered on the bootheel of Missouri, including parts of northeastern Arkansas, northwestern Tennessee, western Kentucky, and southern Illinois. In 1990, the New Madrid seismic zone/Central United States became the first seismically active region east of the Rocky Mountains to be designated a priority research area within the National Earthquake Hazards Reduction Program (NEHRP). This Professional Paper is a collection of papers, some published separately, presenting results of the newly intensified research program in this area. Major components of this research program include tectonic framework studies, seismicity and deformation monitoring and modeling, improved seismic hazard and risk assessments, and cooperative hazard mitigation studies.

Professional Paper↗
USGS1994

A search for paleoliquefaction and evidence bearing on the recurrence behavior of the great 1811-12 New Madrid earthquakes

In the winter of 1811-12, three of the largest historic earthquakes in the United States occurred near New Madrid, Missouri. Seismicity continues to the present day throughout a tightly clustered pattern of epicenters centered on the bootheel of Missouri, including parts of northeastern Arkansas, northwestern Tennessee, western Kentucky, and southern Illinois. In 1990, the New Madrid seismic zone/central United States became the first seismically active region east of the Rocky Mountains to be designated a priority research area within the National Earthquake Hazards Reduction Program (NEHRP). This professional paper is a collection of papers, some published separately, presenting results of the newly intensified research program in this area. Major components of this research program include tectonic framework studies, seismicity and deformation monitoring and modeling, improved seismic hazard and risk assessments, and cooperative hazard mitigation studies.

Professional Paper↗