Search USGSSearch

SEARCH · Search USGS

Results for “Environmental Data Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources

Comparison of Surface Flow Features from Lidar-Derived Digital Elevation Models with Historical Elevation and Hydrography Data for Minnehaha County, South Dakota

The U.S. Geological Survey (USGS) has taken the lead in the creation of a valuable remote sensing product by incorporating digital elevation models (DEMs) derived from Light Detection and Ranging (lidar) into the National Elevation Dataset (NED), the elevation layer of 'The National Map'. High-resolution lidar-derived DEMs provide the accuracy needed to systematically quantify and fully integrate surface flow including flow direction, flow accumulation, sinks, slope, and a dense drainage network. In 2008, 1-meter resolution lidar data were acquired in Minnehaha County, South Dakota. The acquisition was a collaborative effort between Minnehaha County, the city of Sioux Falls, and the USGS Earth Resources Observation and Science (EROS) Center. With the newly acquired lidar data, USGS scientists generated high-resolution DEMs and surface flow features. This report compares lidar-derived surface flow features in Minnehaha County to 30- and 10-meter elevation data previously incorporated in the NED and ancillary hydrography datasets. Surface flow features generated from lidar-derived DEMs are consistently integrated with elevation and are important in understanding surface-water movement to better detect surface-water runoff, flood inundation, and erosion. Many topographic and hydrologic applications will benefit from the increased availability of accurate, high-quality, and high-resolution surface-water data. The remotely sensed data provide topographic information and data integration capabilities needed for meeting current and future human and environmental needs.

Scientific Investigations Report

A global satellite assisted precipitation climatology

Accurate representations of mean climate conditions, especially in areas of complex terrain, are an important part of environmental monitoring systems. As high-resolution satellite monitoring information accumulates with the passage of time, it can be increasingly useful in efforts to better characterize the earth's mean climatology. Current state-of-the-science products rely on complex and sometimes unreliable relationships between elevation and station-based precipitation records, which can result in poor performance in food and water insecure regions with sparse observation networks. These vulnerable areas (like Ethiopia, Afghanistan, or Haiti) are often the critical regions for humanitarian drought monitoring. Here, we show that long period of record geo-synchronous and polar-orbiting satellite observations provide a unique new resource for producing high resolution (0.05°) global precipitation climatologies that perform reasonably well in data sparse regions. Traditionally, global climatologies have been produced by combining station observations and physiographic predictors like latitude, longitude, elevation, and slope. While such approaches can work well, especially in areas with reasonably dense observation networks, the fundamental relationship between physiographic variables and the target climate variables can often be indirect and spatially complex. Infrared and microwave satellite observations, on the other hand, directly monitor the earth's energy emissions. These emissions often correspond physically with the location and intensity of precipitation. We show that these relationships provide a good basis for building global climatologies. We also introduce a new geospatial modeling approach based on moving window regressions and inverse distance weighting interpolation. This approach combines satellite fields, gridded physiographic indicators, and in situ climate normals. The resulting global 0.05° monthly precipitation climatology, the Climate Hazards Group's Precipitation Climatology version 1 (CHPclim v.1.0, http://dx.doi.org/10.15780/G2159X ), is shown to compare favorably with similar global climatology products, especially in areas with complex terrain and low station densities.

Earth System Science Data

Using public litigation records to identify priority science needs for managing public lands

Relevant science is essential for effective natural resource decision making, including on public lands managed by the United States Department of the Interior (DOI) Bureau of Land Management (BLM), that cover 1/10th of the United States. Most of the BLM’s management decisions require analyses under the National Environmental Policy Act, and the use of science in these decisions is often challenged. Using coproduction, we assembled an interagency team of scientists and resource managers to develop a method for using public litigation to identify priority science needs for the BLM. We searched publicly available case documents finalized from 2015–2019 in Wyoming, Colorado, Utah, and New Mexico within federal courts and the DOI Office of Hearings and Appeals, and identified 108 case documents that involved challenges to the BLM’s use of science. We retained 48 case documents that contained at least one challenge about the BLM’s use of science for a specific resource. We categorized all challenges in each case document according to the proposed action, affected resource, type of science challenged (data about resources, science relevant to potential impacts, methods for analyzing potential impacts, and mitigation actions), and specific nature of the challenge (e.g., challenging direct effects analysis). We identified priority science needs based on the frequency of challenges, the number of states where similar challenges occurred, whether the BLM lost the challenge, and whether the case was remanded. Top needs related to oil and gas development actions and included science about effects on air quality and climate, water, and socioeconomics; data for air quality and climate; and methods for analyzing potential impacts to cultural resources and air quality and climate. The BLM can use this information to prioritize actions (e.g., funding new research or science syntheses) to strengthen its science foundation for decision-making.

Colorado, New Mexico, Utah, Wyoming

Assessing the Kansas water-level monitoring program: An example of the application of classical statistics to a geological problem

Geologists may feel that geological data are not amenable to statistical analysis, or at best require specialized approaches such as nonparametric statistics and geostatistics. However, there are many circumstances, particularly in systematic studies conducted for environmental or regulatory purposes, where traditional parametric statistical procedures can be beneficial. An example is the application of analysis of variance to data collected in an annual program of measuring groundwater levels in Kansas. Influences such as well conditions, operator effects, and use of the water can be assessed and wells that yield less reliable measurements can be identified. Such statistical studies have resulted in yearly improvements in the quality and reliability of the collected hydrologic data. Similar benefits may be achieved in other geological studies by the appropriate use of classical statistical tools.

The Compass: Earth Science Journal of Sigma Gamma

Modeling rare plant habitat together with public land managers using an iterative, coproduced process to inform decision-making on multiple-use public lands

Public lands across the United States are managed for multiple uses, resources, and values ranging from energy development to rare plant conservation. Intensified energy development and other land use changes across the Southwestern United States have increased the need for proactive management to mitigate impacts to rare plants. Habitat suitability models can inform decision-making and lead to more effective conservation of rare plants and their habitats, but high-quality models that are suited for use at local scales are lacking for many species. Our team of scientists and managers developed ensembles of habitat suitability models for five rare plant species in New Mexico using a coproduced, iterative framework complemented by comprehensive ground truthing and tailoring of products for use in public land decisions. Our process resulted in substantial differences from initial models through changes to environmental predictors, species occurrence and background data, and development of new species-specific predictors. Involving species experts and end users in model development can strengthen the process and resulting model and build understanding and trust in final products. Both factors can promote use of models to inform public land permitting and planning decisions that may affect rare plants, including by guiding development away from highly suitable habitats.

Colorado, New Mexico

What goes up must come down: Integrating air and water quality monitoring for nutrients

Excess nitrogen and phosphorus (“nutrients”) loadings continue to affect ecosystem function and human health across the U.S. Our ability to connect atmospheric inputs of nutrients to aquatic end points remains limited due to uncoupled air and water quality monitoring. Where connections exist, the information provides insights about source apportionment, trends, risk to sensitive ecosystems, and efficacy of pollution reduction efforts. We examine several issues driving the need for better integrated monitoring, including: coastal eutrophication, urban hotspots of deposition, a shift from oxidized to reduced nitrogen deposition, and the disappearance of pristine lakes. Successful coordination requires consistent data reporting; collocating deposition and water quality monitoring; improving phosphorus deposition measurements; and filling coverage gaps in urban corridors, agricultural areas, undeveloped watersheds, and coastal zones.

Environmental Science and Technology

Landsat yesterday and today: An American vision and an old challenge

Since the late 1960s, the United States government has invested more than $1 billion in designing, launching, and operating the Landsat (land satellite) series of Earth-observing satellites. Global change researchers, geologists, and environmental scientists have used images gathered by the satellites for purposes ranging from human health research, energy exploration, and pollution detection to agricultural assessments, urban growth monitoring, and earthquake lineament studies. The earliest data were captured on a digital medium called wide-band video tape (WBVT). However, two decades of unsound media storage conditions and a poorly maintained processing system have left the physically deteriorating WBVTs with no mechanism for interpretation. A national treasure was in jeopardy. With seed money from the National Aeronautics and Space Administration (NASA), the U.S. Geological Survey (USGS) began a project to rescue the data. More than 21,000 tapes from the 1970s have been transcribed to stable, archival media, preserving the data for future studies in Earth System Science.

Journal of Map & Geography Libraries

Deep-sea coral research and technology program: Alaska deep-sea coral and sponge initiative final report

Deep-sea coral and sponge ecosystems are widespread throughout most of Alaska’s marine waters. In some places, such as the central and western Aleutian Islands, deep-sea coral and sponge resources can be extremely diverse and may rank among the most abundant deep-sea coral and sponge communities in the world. Many different species of fishes and invertebrates are associated with deep-sea coral and sponge communities in Alaska. Because of their biology, these benthic invertebrates are potentially impacted by climate change and ocean acidification. Deepsea coral and sponge ecosystems are also vulnerable to the effects of commercial fishing activities. Because of the size and scope of Alaska’s continental shelf and slope, the vast majority of the area has not been visually surveyed for deep-sea corals and sponges. NOAA’s Deep Sea Coral Research and Technology Program (DSCRTP) sponsored a field research program in the Alaska region between 2012–2015, referred to hereafter as the Alaska Initiative. The priorities for Alaska were derived from ongoing data needs and objectives identified by the DSCRTP, the North Pacific Fishery Management Council (NPFMC), and Essential Fish Habitat-Environmental Impact Statement (EFH-EIS) process. This report presents the results of 15 projects conducted using DSCRTP funds from 2012-2015. Three of the projects conducted as part of the Alaska deep-sea coral and sponge initiative included dedicated at-sea cruises and fieldwork spread across multiple years. These projects were the eastern Gulf of Alaska Primnoa pacifica study, the Aleutian Islands mapping study, and the Gulf of Alaska fish productivity study. In all, there were nine separate research cruises carried out with a total of 109 at-sea days conducting research. The remaining projects either used data and samples collected by the three major fieldwork projects or were piggy-backed onto existing research programs at the Alaska Fisheries Science Center (AFSC).

NOAA Technical Memorandum

Nitrogen isotopes as indicators of NOx source contributions to atmospheric nitrate deposition across the midwestern and northeastern United States

Global inputs of NO x are dominated by fossil fuel combustion from both stationary and vehicular sources and far exceed natural NO x sources. However, elucidating NO x sources to any given location remains a difficult challenge, despite the need for this information to develop sound regulatory and mitigation strategies. We present results from a regional-scale study of nitrogen isotopes (δ 15 N) in wet nitrate deposition across 33 sites in the midwestern and northeastern U.S. We demonstrate that spatial variations in δ 15 N are strongly correlated with NO x emissions from surrounding stationary sources and additionally that δ 15 N is more strongly correlated with surrounding stationary source NO x emissions than pH, SO 4 2- , or NO 3 - concentrations. Although emission inventories indicate that vehicle emissions are the dominant NO x source in the eastern U.S., our results suggest that wet NO 3 - deposition at sites in this study is strongly associated with NO x emissions from stationary sources. This suggests that large areas of the landscape potentially receive atmospheric NO y deposition inputs in excess of what one would infer from existing monitoring data alone. Moreover, we determined that spatial patterns in δ 15 N values are a robust indicator of stationary NO x contributions to wet NO 3 - deposition and hence a valuable complement to existing tools for assessing relationships between NO 3 - deposition, regional emission inventories, and for evaluating progress toward NO x reduction goals.

Connecticut, Maine, Massachusetts, New Hampshire,

Evaluation of the use of performance reference compounds in an oasis-HLB adsorbent based passive sampler for improving water concentration estimates of polar herbicides in freshwater

Passive samplers such as the Polar Organic Chemical Integrative Sampler (POCIS) are useful tools for monitoring trace levels of polar organic chemicals in aquatic environments. The use of performance reference compounds (PRC) spiked into the POCIS adsorbent for in situ calibration may improve the semiquantitative nature of water concentration estimates based on this type of sampler. In this work, deuterium labeled atrazine-desisopropyl (DIA-d5) was chosen as PRC because of its relatively high fugacity from Oasis HLB (the POCIS adsorbent used) and our earlier evidence of its isotropic exchange. In situ calibration of POCIS spiked with DIA-d5was performed, and the resulting time-weighted average concentration estimates were compared with similar values from an automatic sampler equipped with Oasis HLB cartridges. Before PRC correction, water concentration estimates based on POCIS data sampling ratesfrom a laboratory calibration exposure were systematically lower than the reference concentrations obtained with the automatic sampler. Use of the DIA-d5 PRC data to correct POCIS sampling rates narrowed differences between corresponding values derived from the two methods. Application of PRCs for in situ calibration seems promising for improving POCIS-derived concentration estimates of polar pesticides. However, careful attention must be paid to the minimization of matrix effects when the quantification is performed by HPLC-ESI-MS/MS. ?? 2010 American Chemical Society.

Environmental Science & Technology

Anaerobic benzene oxidation in the Fe(III) reduction zone of petroleum-contaminated aquifers

The potential for anaerobic benzene oxidation in the Fe(III)-reduction zone of petroleum-contaminated aquifers was evaluated. Sediments were incubated under strict anaerobic conditions without any amendments in order to simulate in situ conditions. [ 14 C]Benzene was not oxidized to 14 CO 2 at most sites examined, which is consistent with previous studies that have found that benzene tends to persist in unamended, anaerobic aquifer materials and/or long periods of time are required in order to adapt the microbial population for benzene degradation. However, at one site located in Bemidji, MN, [ 14 C]benzene was oxidized to 14 CO 2 in unamended sediments without an apparent lag, suggesting that benzene was anaerobically degraded in situ. Benzene was not significantly oxidized in sediments from nearby Fe(III)-reducing sites nor in sediments collected from an uncontaminated background site in the same aquifer. Culturing and 16S rRNA-based molecular studies of the Bemidji aquifer demonstrated that while all sites contained similar numbers of Fe(III)-reducing microorganisms closely related to Geothrix fermentens , the site at which anaerobic benzene degradation was observed was greatly enriched with microorganisms in the family Geobacteraceae . This study provides the first data consistent with in situ anaerobic oxidation of benzene to carbon dioxide in the Fe(III)-reducing zone of a petroleum-contaminated aquifer and suggests that comparative studies on the size of the Geobacteraceae community in petroleum-contaminated aquifers might aid in the location of zones in which benzene degradation coupled to Fe(III) reduction is taking place.

Environmental Science & Technology

Spatially resolved source apportionment of per- and polyfluoroalkyl substances (PFAS) within a post-industrial river catchment

Source apportionment of per- and polyfluoroalkyl substances (PFAS) in rivers is typically based on water concentrations, which cannot quantify PFAS loads or define geographical source areas. This study applied a river catchment-scale approach to identify PFAS source zones and assess the relative importance of industrial PFAS sources in the River Mersey, UK – a post-industrial, densely populated catchment with diverse PFAS sources. Synoptic sampling and PFAS river load analysis identified key sub-catchments and river stretches contributing the majority of PFAS. Notably, the highest PFAS concentrations did not always correspond to the greatest loads. Most PFOS (64 %), PFOA (49 %), 6:2FTS (46 %) and PFHxS (56 %) were exported from the Upper Mersey sub-catchment, despite higher concentrations in northern sub-catchments, emphasising the importance of load-based monitoring. Mass balance analysis of loads highlighted substantial inputs from specific river stretches, notably the Lower Irwell (Bolton to Manchester City Centre), River Tame (Marple Bridge to Stockport), and Upper Mersey (Stockport to Urmston). While PFAS loads generally scaled with catchment area, yield (load per unit area) analysis identified disproportionately high exports from small headwater catchments, notably the upper River Roch (PFOA, PFHpA and PFHxA) and Glaze Brook (PFBS). Industrial sources in these sub-catchments (a waste management facility and landfills, respectively) were confirmed using gadolinium anomaly analysis and consented discharge records. More widely, gadolinium data suggested industrial discharges may contribute to PFAS occurrence at 62 % of our sample sites throughout the catchment. These findings demonstrate that spatial analysis of PFAS loads, rather than concentrations alone, is critical for identifying PFAS source areas. We present a scalable monitoring framework for PFAS source apportionment applied at the river catchment-scale that can be used by environmental managers to target and prioritise PFAS source areas for detailed monitoring and remediation.

River Mersey

Geographic information systems, remote sensing, and spatial analysis activities in Texas, 2008-09

Geographic information system (GIS) technology has become an important tool for scientific investigation, resource management, and environmental planning. A GIS is a computer-aided system capable of collecting, storing, analyzing, and displaying spatially referenced digital data. GIS technology is useful for analyzing a wide variety of spatial data. Remote sensing involves collecting remotely sensed data, such as satellite imagery, aerial photography, or radar images, and analyzing the data to gather information or investigate trends about the environment or the Earth's surface. Spatial analysis combines remotely sensed, thematic, statistical, quantitative, and geographical data through overlay, modeling, and other analytical techniques to investigate specific research questions. It is the combination of data formats and analysis techniques that has made GIS an essential tool in scientific investigations. This fact sheet presents information about the technical capabilities and project activities of the U.S. Geological Survey (USGS) Texas Water Science Center (TWSC) GIS Workgroup during 2008 and 2009. After a summary of GIS Workgroup capabilities, brief descriptions of activities by project at the local and national levels are presented. Projects are grouped by the fiscal year (October-September 2008 or 2009) the project ends and include overviews, project images, and Internet links to additional project information and related publications or articles.

Fact Sheet

Potential toxicity of dissolved metal mixtures (Cd, Cu, Pb, Zn) to early life stage white sturgeon (Acipenser transmontanus) in the Upper Columbia River, Washington, United States

The Upper Columbia River (UCR) received historical releases of smelter waste resulting in elevated metal concentrations in downstream sediments. Newly hatched white sturgeon hide within the rocky substrate at the sediment–water interface in the UCR for a few weeks before swim-up. Hiding behavior could expose them to metal contaminants, and metal toxicity could contribute to population declines in white sturgeon over the past 50 years. This study evaluates whether there is a link between the toxicity of dissolved metals across the sediment-water interface in the UCR and the survival of early life stage (ELS) white sturgeon. Toxicity of dissolved metal mixtures is evaluated using a combination of previously collected laboratory and field data and recently developed metal mixture toxicity models. The laboratory data consist of individual metal (Cd, Cu, Pb, and Zn) toxicity studies with ELS white sturgeon. The field data include the chemical composition of surface and pore water samples that were collected across the sediment–water interface in the UCR. These data are used in three metal accumulation and two response models. All models predict low toxicity in surface water, whereas effects concentrations greater than 20% are predicted for 60–72% of shallow pore water samples. The flux of dissolved metals, particularly Cu, from shallow pore water to surface water likely exposes prime ELS sturgeon habitat to toxic conditions.

Washington

Occurrence of the gasoline oxygenate MTBE and BTEX compounds in urban stormwater in the United States, 1991-95

Methyl tert -butyl ether (MTBE) is a gasoline oxygenate. Oxygenates such as MTBE, when added to gasoline, increase the gasoline's oxygen level and decrease vehicular carbon monoxide emissions and ozone levels in the atmosphere. MTBE disperses rapidly in water, was the second most frequently detected volatile organic compound (VOC) in a study of shallow urban ground water, and is less biodegradable than common gasoline compounds, such as benzene, toluene, ethylbenzene, and total xylene (BTEX). Urban Stormwater is a possible source of MTBE found in shallow ground water. The U.S. Geological Survey (USGS) sampled stormwater in 16 cities and metropolitan areas that are required to obtain permits to discharge Stormwater from their municipal storm-sewer system into surface water. Concentrations of 62 VOCs, including MTBE and BTEX compounds, were measured in 592 Stormwater samples collected in these cities and metropolitan areas from 1991 through 1995. Concentration data for MTBE and BTEX compounds in stormwater were compiled and analyzed, and the findings are summarized in this report. This effort was part of an interagency assessment of the scientific basis and effectiveness of the Nation's oxygenated fuel program and was coordinated by the Office of Science and Technology Policy, Executive Office of the President. MTBE was the seventh most frequently detected VOC in urban Stormwater, following toluene, total xylene, chloroform, total trimethylbenzene, tetrachloroethene, and naphthalene. MTBE was detected in 6.9 percent (41 of 592) of Stormwater samples collected. When detected, concentrations of MTBE ranged from 0.2 to 8.7 micrograms per liter (µg/L), with a median of 1.5 µg/L. All detections of MTBE were less than the lower limit of the U.S. Environmental Protection Agency (EPA) draft lifetime health advisory (20 µg/L) for drinking water. Eighty-three percent of all detections of MTBE in Stormwater were in samples collected during the October through March season of each year (1991-95), which corresponds with the expected seasonal use of oxygenated gasoline in areas where carbon monoxide exceeds established air-quality standards. The median concentration of MTBE and benzene for all samples was statistically different and higher in samples collected during the October through March season than samples collected during the April through September season. Sixty-six percent of all MTBE detections occurred with BTEX compounds, and a proportionate increase in concentrations was found when these compounds occurred together. The proportionate increase could indicate a common source of MTBE and BTEX for those samples. Toluene and total xylene were the most frequently detected BTEX compounds and the most frequently detected VOCs in these investigations. Detected concentrations of toluene and total xylene ranged from 0.2 to 6.6 µg/L and 0.2 to 15 µg/L with median concentrations of 0.3 and 0.4 iig/L, respectively

Water-Resources Investigations Report

Seven recommendations to make your invasive alien species data more useful

Science-based strategies to tackle biological invasions depend on recent, accurate, well-documented, standardized and openly accessible information on alien species. Currently and historically, biodiversity data are scattered in numerous disconnected data silos that lack interoperability. The situation is no different for alien species data, and this obstructs efficient retrieval, combination, and use of these kinds of information for research and policy-making. Standardization and interoperability are particularly important as many alien species related research and policy activities require pooling data. We describe seven ways that data on alien species can be made more accessible and useful, based on the results of a European Cooperation in Science and Technology (COST) workshop: (1) Create data management plans; (2) Increase interoperability of information sources; (3) Document data through metadata; (4) Format data using existing standards; (5) Adopt controlled vocabularies; (6) Increase data availability; and (7) Ensure long-term data preservation. We identify four properties specific and integral to alien species data (species status, introduction pathway, degree of establishment, and impact mechanism) that are either missing from existing data standards or lack a recommended controlled vocabulary. Improved access to accurate, real-time and historical data will repay the long-term investment in data management infrastructure, by providing more accurate, timely and realistic assessments and analyses. If we improve core biodiversity data standards by developing their relevance to alien species, it will allow the automation of common activities regarding data processing in support of environmental policy. Furthermore, we call for considerable effort to maintain, update, standardize, archive, and aggregate datasets, to ensure proper valorization of alien species data and information before they become obsolete or lost.

Frontiers in Applied Mathematics and Statistics

Limitations in the use of commercial humic acids in water and soil research

Seven samples of commercial "humic acids", purchased from five different suppliers, were studied, and their characteristics were compared with humic and fulvic acids isolated from streams, soils, peat, leonardite, and a dopplerite sample. Cross-polarization and magic-angle spinning 13C NMR spectroscopy clearly shows pronounced differences between the commercial materials and all other samples. Elemental and infrared spectroscopic data do not show such clear-cut differences but can be used as supportive evidence, with the 13C NMR data, to substantiate the above distinctions. As a result of these differences and due to the general lack of information relating to the source, method of isolation, or other pretreatment of the commercial materials, these commercial products are not considered to be appropriate for use as analogues of true soil and water humic substances, in experiments designed to evaluate the nature and reactivity of humic substances in natural waters and soils.

Environmental Science & Technology

Estimates of global surface water dynamics harnessing near real-time land cover observations and open science geospatial capabilities

Spatio-temporal changes to our world’s surface water resources are escalating. Translating how these changes impact communities and ecosystems requires time-varying data of Global Surface Water Extents (GSWE). Traditionally, GSWE mapping has been limited to static estimates, with recent efforts focusing on annual averages, frequency and occurrence of long-term variations. Building upon these foundational capabilities, we harnessed remotely sensed Sentinel-2 based near real-time Dynamic World (DW) land cover products to produce the first-of-its-kind 10 m resolution GSWE dataset representing 2015–2023. Our dataset estimated 2.5 million km 2 of permanent waters and 8 million km 2 of seasonal waters worldwide. Comparing our Sentinel-2 based data to contemporary Landsat-based GSWE, we observed that our data mapped less water within the >50% probability of occurrence range, suggesting a lower presence of open permanent water especially in high latitudes, deviating from what we previously learnt from Landsat data. Statistical analysis compared to well-established observational products and widely used GSWE datasets across some of the world’s most ecologically significant regions, including Pantanal in South America and Haor in South Asia, supports the overall physical realism of our data in predicting global open surface water dynamics. Our key contribution is a prototype Open Science operational framework that extracts routinely available DW products, runs geospatial analytics, and creates actionable water information for educators, researchers, and stakeholders at any scale of practical interest. We present examples of this operational capability through instant mapping of flood in Spain and drought in Lake Urmia, Central Asia, frequent monitoring of river extent changes at the Ganges–Brahmaputra confluence, and above all, interoperability with other existing GSWE applications.

Environmental Research Letters