Search USGS⌕ Search

SEARCH · Search USGS

Results for “earthquake hazards”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

Geological Survey research, 1975

'Geological Survey Research 1975 ' is the 16th annual synopsis of the results of U.S. Geological Survey investigations. These studies are largely directed toward the development of knowledge that will assist the Nation to use and conserve the land and its physical resources wisely. They are wide ranging in scope and deal with almost every facet of solid-earth science and fact finding. Many of the studies are continuations of investigations that have been in progress for several years. But others reflect the increased attention being given to problems that have assumed greater importance in recent years--problems relating to mineral fuels and mineral resources, water quality, environmental impact of mineral resources, land-use analysis, earthquake hazards reduction, subsidence, and the applications of LANDSAT data, to cite a few examples.

Professional Paper↗

Geology, tephrochronology, radiometric ages, and cross sections of the Mark West Springs 7.5' quadrangle, Sonoma and Napa counties, California

The purpose of this geologic map is to provide a context within which to interpret the Neogene evolution of the active strike-slip fault system traversing the Mark West Springs 7.5' quadrangle and adjacent areas. Based on this geologic framework, the timing and total amounts of displacement and the Neogene rates of slip for faults of the right-stepover area between the Healdsburg and Maacama Faults are addressed. The Mark West Springs quadrangle is located in the northern California Coast Ranges north of San Francisco Bay. It is underlain by Mesozoic rocks of the Franciscan Complex, the Coast Range ophiolite, and the Great Valley sequence, considered here to be the pre-Tertiary basement of the northern Coast Ranges. These rocks are overlain by a complexly interstratified and mildly to moderately deformed sequence of Pleistocene to late Miocene marine and nonmarine sedimentary and largely subaerial volcanic rocks. These rocks and unconformably overlying, less-deformed Holocene and Pleistocene strata are cut by the active right-lateral Healdsburg and Maacama Fault Zones. Mapping of the Mark West Springs quadrangle began in 1996 and was completed in October 2002. Most of the mapping presented here is original, although a few other sources of existing geologic mapping were also utilized. Funding for the project was provided by the National Cooperative Geologic Mapping and Earthquake Hazards Reduction programs of the U.S. Geological Survey, in cooperation with geologic hazards mapping investigations of the California Geological Survey.

Scientific Investigations Map↗

Geologic Map of the Santa Barbara Coastal Plain Area, Santa Barbara County, California

This report presents a newly revised and expanded digital geologic map of the Santa Barbara coastal plain area at a compilation scale of 1:24,000 (one inch on the map to 2,000 feet on the ground)1 and with a horizontal positional accuracy of at least 20 m. The map depicts the distribution of bedrock units and surficial deposits and associated deformation underlying and adjacent to the coastal plain within the contiguous Dos Pueblos Canyon, Goleta, Santa Barbara, and Carpinteria 7.5' quadrangles. The new map supersedes an earlier preliminary geologic map of the central part of the coastal plain (Minor and others, 2002; revised 2006) that provided coastal coverage only within the Goleta and Santa Barbara quadrangles. In addition to new mapping to the west and east, geologic mapping in parts of the central map area has been significantly revised from the preliminary map compilation - especially north of downtown Santa Barbara in the Mission Ridge area - based on new structural interpretations supplemented by new biostratigraphic data. All surficial and bedrock map units, including several new units recognized in the areas of expanded mapping, are described in detail in the accompanying pamphlet. Abundant new biostratigraphic and biochronologic data based on microfossil identifications are presented in expanded unit descriptions of the marine Neogene Monterey and Sisquoc Formations. Site-specific fault kinematic observations embedded in the digital map database are more complete owing to the addition of slip-sense determinations. Finally, the pamphlet accompanying the present report includes an expanded and refined summary of stratigraphic and structural observations and interpretations that are based on the composite geologic data contained in the new map compilation. The Santa Barbara coastal plain is located in the western Transverse Ranges physiographic province along an east-west-trending segment of the southern California coastline about 100 km (62 mi) northwest of Los Angeles. The coastal plain surface includes several mesas and hills that are geomorphic expressions of potentially active folds and partly buried oblique and reverse faults of the Santa Barbara fold and fault belt (SBFFB) that transects the coastal plain. Strong earthquakes have occurred offshore within 10 km of the Santa Barbara coastal plain in 1925 (6.3 magnitude), 1941 (5.5 magnitude), and 1978 (5.1 magnitude). These and numerous smaller seismic events located beneath and offshore of the coastal plain, likely occurred on reverse-oblique-slip faults that are similar to, or continuous with, Quaternary reverse faults crossing the coastal plain. Thus, faults of the SBFFB pose a significant earthquake hazard to the approximately 200,000 people living within the major coastal population centers of Santa Barbara, Goleta, and Carpinteria. In addition, numerous Quaternary landslide deposits along the steep southern flank of the Santa Ynez Mountains indicate the potential for continued slope failures and mass movements in developed areas. Folded, faulted, and fractured sedimentary rocks in the subsurface of the coastal plain and adjacent Santa Barbara Channel are sources and form reservoirs for economic deposits of oil and gas, some of which are currently being extracted offshore. Shallow, localized sedimentary aquifers underlying the coastal plain provide limited amounts of water for the urban areas, but the quality of some of this groundwater is compromised by coastal salt-water contamination. The present map compilation provides a set of uniform geologic digital coverages that can be used for analysis and interpretation of these and other geologic hazards and resources in the coastal plain region.

Scientific Investigations Map↗

Field observations and logs from the Rose Hip trench exposure across a north-facing scarp within the Seattle Fault Zone, southern Bainbridge Island, Washington

The Seattle Fault Zone is an approximately 70-km-long, east-west-trending zone of south-dipping blind reverse faults within the Puget lowland region in Washington. Because of the proximity, the Seattle Fault Zone poses a significant earthquake hazard to the Puget sound and Seattle metropolitan regions. We present preliminary mapping and trench-site information from a paleoseismic investigation across a newly identified active fault scarp located within the hanging wall of the Seattle Fault Zone on southern Bainbridge Island, Washington. The trench exposed monoclinally folded Miocene bedrock, fractured and faulted glacial-related deposits, and laminated lacustrine deposits capped by slope-derived colluvium. The observations from this investigation record late Pleistocene to Holocene north-vergent folding and faulting along this new fault scarp.

Washington↗

Late Quaternary deposition in the inner basins of the California continental borderland — Part A. Santa Monica Basin

Radiocarbon dating of sediment core samples from Santa Monica Basin document Holocene (younger than approximately 11 ka) landslides and fault offsets along the basin margin. The new dates include 17 from six piston cores on the continental slope and 11 from Ocean Drilling Program Site 1015 on the basin floor. The dates, which are based on data from pelagic and benthic foraminifera in addition to several dates from mollusk shells, are used to provide chronostratigraphic control for a previously determined basin-wide seismic stratigraphy. The geologic setting at the core sites and a sediment log for each core are shown. In addition, each sediment log is accompanied by a color core photograph as well as P-wave velocity and gamma-ray density profiles. The primary purpose of the report is to make the radiocarbon dates available for other studies in the Santa Monica Basin. A comparison of sediment accumulation rates between the late Pleistocene and Holocene provides insight to the effects of sea-level change on sediment input to the basin. In addition, the results can be used to evaluate the effectiveness of wire-line piston coring in providing age control for earthquake hazard and sedimentologic studies.

California↗

Summary of some current and possible future environmental problems related to geology and hydrology at Memphis, Tennessee

Memphis, Tennessee, like many other cities in the Nation, has some problems related to local geology and hydrology. The city is in the Coastal Plain physiographic province and is underlain at shallow depths by sand, clay, silt, gravel, and lignite. These post-Midway strata (Wilcox and younger) make up geologic units belonging to the uppermost Paleocene, Eocene, and Pliocene (?) Series of the Tertiary System and to the Pleistocene and Holocene Series of the Quaternary System. Environmental problems of immediate or future concern are associated with six general topics: (1) aggregate resources, (2) foundation materials, (3) earthquake hazards, (4) flood hazards, (5) water resources, and (6) solid waste disposal. Consideration of these topics in one report should provide an overall insight into the close interrelation of the problems and the need for coordinated studies of the geology and hydrology at Memphis.

Tennessee↗

STRONG-MOTION INSTRUMENTATION OF STRUCTURES IN CHARLESTON, SOUTH CAROLINA AND ELSEWHERE.

Instrumentation of structures is part of earthquake hazard mitigation program of many institutions, including the United States Geological Survey (USGS). The USGS Strong-Motion Instrumentation of Structures Program is designed to complement other programs and to implement its own, within budget and other constraints. This paper reviews the overall national effort, cites examples of structures implemented and describes progress made to date. A recent example of instrumentation of an eight-story building in Charleston, South Carolina is documented.

Conference Paper↗

Accessibility of geotechnical earthquake Engineering data and the need for data storage and dissemination standards

Ease of data access and data standards are two issues critical to the success of GIS technology when applied to earthquake hazards research problems that require geotechnical engineering and related data. Efforts to reduce data accession costs and to streamline the data exchange process will result in short-term cost and time saving and will add long-term value to the data sets themselves. Such efforts might include centralized data centers, standardized data base designs and formats, cooperative efforts to fill data gaps, and standardized distribution methods and media.

Conference Paper↗

SH-wave refraction/reflection and site characterization

Traditionally, nonintrusive techniques used to characterize soils have been based on P-wave refraction/reflection methods. However, near-surface unconsolidated soils are oftentimes water-saturated, and when groundwater is present at a site, the velocity of the P-waves is more related to the compressibility of the pore water than to the matrix of the unconsolidated soils. Conversely, SH-waves are directly relatable to the soil matrix. This makes SH-wave refraction/reflection methods effective in site characterizations where groundwater is present. SH-wave methods have been used extensively in site characterization and subsurface imaging for earthquake hazard assessments in the central United States and western Oregon. Comparison of SH-wave investigations with geotechnical investigations shows that SH-wave refraction/reflection techniques are viable and cost-effective for engineering site characterization.

Conference Paper↗

Issues of scale, location and geologic terrain related to Salt Lake City and Baltimore-Washington metropolitan areas

Planning and development of expanding metropolitan regions require consideration of earth science issues related to issues involving scale, space (location), geologic terrain and physiographic units, and information transfer. This paper explores these matters with examples from the Salt Lake City, Utah area and Mid-Atlantic region of Baltimore-Washington that include water supply and natural hazards (earthquakes, landslides, and sinkholes.) Information transfer methods using physiographic units at national, regional, local and site scales serve to communicate relevant geologic constraint and natural resource information.

Conference Paper↗

Morphology and age of fault scarps in the Rio Grande Rift, south-central Colorado

Fault scarps in the Rio Grande rift of Colorado provide most of the evidence of paleoseismicity in the state, and are thus a major focus of assessments of earthquake hazards. Critical components of such assessments are the ages of past faulting events; age control is scarce and generally coarse for the Rio Grande rift in Colorado. Ages estimated from fault-scarp morphology are thus valuable, partly because they are directly related to the fault eVents, and partly for want of alternative methods. The processes responsible for scarp degradation are poorly understood and the many variables that affect the rates and relative importance of those processes limits the precision and accuracy of age estimates derived from scarp morphology. Both analytical and empirical methods are available for relating scarp degradation processes to scarp morphology and age. Diffusion-equation models that have been derived for scarp degradation are useful for their predictive value and for the insight they provide about the degradation processes. However, because of the limitations mentioned above and because of the multiple-event nature of the scarps in the Rio Grande rift, the simpler empirical approach involving the relation between scarp angle and the logarithm of scarp height is used here. The scarp-morphology data from the Rio Grande rift suggest that the youngest movements on all of the scarps examined occurred less than 15,000 years ago, with the exception of two scarps that are formed on lithologically dissimilar deposits. This age estimate is consistent with the observation that all of the scarps occur at least in part on deposits of Pinedale age. The scarp-morphology data suggest that some of the scarps are closer to 5,000 years than to 15,000 years in age; several of these scarps occur on deposits of early Holocene age and are associated with early Holocene radiocarbon dates. One scarp occurs on deposits with radiocarbon dates of only a few thousand years, although the morphology of this scarp is unusual for its age. Three scarps have morphologies that suggest that they may represent fault events younger than 5,000 years old. Although no corroboration is available, these scarps may represent some of the youngest fault movements in Colorado.

Colorado↗

Biostratigraphy and paleoecology of lower Paleozoic, upper Cretaceous, and lower Tertiary rocks in U.S. Geological Survey New Madrid test wells, Southeastern Missouri

The paleontology and biostratigraphy of Tertiary, Cretaceous, and Paleozoic rocks in the upper Mississippi embayment are incompletely known because marine fossils are only locally present in these rocks. This study concerns material from two U.S. Geological Survey test wells drilled in New Madrid County, southeastern Missouri, as part of earthquake hazard studies in the northern Mississippi Embayment. Test well1 sampled lower Tertiary strata to a depth of 146ft; these strata were found to be late Eocene in age on the basis of sporomorphs. Test well1-X, 29ft northwest of well1, provided cuttings and cores from lower Tertiary, Upper Cretaceous, and lower Paleozoic rocks to a total depth of 2,316 ft below the Kelly bushing (at an altitude of 288 ft). Lithologic evidence suggests that the base of the Jackson Formation may be at 270 ft, but sporomorphs indicate that the base of the Jacksonian Stage (upper Eocene) is possibly at a depth of about 350ft in test well1-X. Lithologic units of the Claibornian Stage (middle Eocene) here consist of the Cockfield(?) and Cook Mountain(?) Formations and Memphis Sand, in descending order. The Claibornian could not be subdivided using sporomorphs from cuttings, but sporomorphs show that the top of the Sabinian Stage (top of the lower Eocene) is at about 1,055 ft; lithologically, the top of the Wilcox Group (top of the Flour Island Formation) is at 1,048 ft. Sporomorphs suggest that the top of the lower Sabinian (top of the Paleocene) is within the Flour Island Formation at about 1,105 ft. The next major lithologic break, the top of the Fort Pillow Sand at 1,186 ft, does not coincide with any detectable biostratigraphic boundary. Lithologically, the interval from 1,339 to 1,377 ft may belong to the Old Breastworks Formation; dinoflagellates from cuttings indicate that this interval is likely to be late Midwayan in age and, therefore, correlative with the Naheola Formation of the eastern Gulf Coast. The Porters Creek Clay extends from a probable top at 1,377 ft to 1,691 ft, and the base of the underlying Clayton Formation (Tertiary-Cretaceous contact) is at 1, 703 ft. Calcareous nannofossils, dinoflagellates, foraminifers, mollusks, ostracodes, and sporomorphs from continuous cores of the Porters Creek Clay and Clayton Formation indicate that the upper half of the Porters Creek correlates with the upper part of the same formation or perhaps partly with slightly younger rocks in the eastern Gulf Coast, the lowermost Porters Creek appears to correlate with the upper part of the Clayton Formation of the eastern Gulf Coast and with the Kincaid Formation of Texas, and the thin Clayton of the test well probably correlates with only the lower part of the thicker Clayton of the eastern Gulf Coast. Sporomorphs from McNairy Sand (Upper Cretaceous) cores indicate Maestrichtian and perhaps latest Campanian Age. Lower Paleozoic dolostone from 2,023 ft to total depth at 2,316 ft is barren of identifiable fossils except for a probable fragment of the fish Anatolepis; the dolostone is probably Late Cambrian in age. The McNairy Sand of New Madrid well 1-X seems to have been deposited in nonmarine to nearshore marine environments; the Clayton Formation and lower part of the Porters Creek Clay were deposited under marine conditions during an early Paleocene marine transgression. A major regression followed that continued through the end of Porters Creek time and perhaps into Naheola (late Midwayan) time; the Sabinian, Claibornian, and Jacksonian strata in southeastern Missouri were deposited primarily or entirely in nonmarine environments.

Missouri↗

Geothermal potential of the Umatilla Indian Reservation, Oregon: Evidence from detailed geophysical investigations

Recent geologic and geophysical investigations were undertaken in northeastern Oregon to better assess earthquake hazards in the region and determine relative favorability for geothermal energy development on lands of the Confederated Tribes of the Umatilla Indian Reservation (CTUIR). This work was funded in part by a Bureau of Indian Affairs grant awarded to the CTUIR to identify areas most suitable for further exploration of geothermal resources. Results from this work were utilized as inputs to a geothermal favorability modeling process that led to the identification of target sites for further geothermal investigation. Beyond the geothermal aspect of this project, the region is of great tectonic significance as it marks the intersection of two major physiographic and geophysical features, the Klamath-Blue Mountain lineament (KBL) and Olympic-Wallowa lineament (OWL), inferred to represent major basement boundaries. The Thorn Hollow and Hite faults, which appear to be major linkages between the KBL and OWL, run through the study area. New aeromagnetic, gravity and magnetotelluric (MT) surveying, along with fault analyses, were conducted as part of this effort. Detailed geophysical exploration resulted in the collection of 1,380 new gravity stations, 34,524-line kilometers of aeromagnetic data (covering 12,524 km2) and measurements from 36 MT stations. Two-dimensional (2D) forward-modeling was executed along several profiles using gravity and aeromagnetic data, combined with existing geologic mapping and rock property constraints measured from hand samples and outcrops. These models are used to define lithologic contacts in the subsurface in the absence of well logs or borehole data to determine possible geothermal fluid reservoirs, as well as identify major structures that may act as conduits for the upward migration of geothermal fluids.

Oregon↗

New high resolution airborne geophysical surveys in Nevada And California for geothermal and mineral resource studies

The U.S. Geological Survey (USGS) and the Department of Energy (DOE) are collaborating to acquire high-resolution airborne magnetic and radiometric data to support geologic and geophysical mapping and modeling that will assist geothermal and critical mineral studies. Coordinated with these efforts are programs supporting geologic mapping and airborne LiDAR (light detection and ranging) surveys that yield detailed surface topographic models of the terrain over the same regions spanned by the geophysical surveys. The collaboration leverages resources from the USGS and DOE to acquire large regional datasets that will provide fundamental data necessary to map surface and subsurface geology and structure to benefit mineral and resource program objectives of both agencies. Such regionally uniform datasets are important for geothermal research to assist in identifying geologically favorable settings and as invaluable inputs in predictive models targeting undiscovered resources that use knowledge-driven (e.g., play fairway analysis) or data-driven approaches (e.g., machine-learning methods) to reduce risk associated with resource exploration. These data will also serve a wide range of other related activities from hazard (earthquake, volcano, landslide, environmental) and resource (water, mineral, energy) studies, to mapping and land management. Surveys were conducted in two areas that were selected because they host substantial geothermal and mineral potential in California and Nevada. The data will aid several ongoing USGS and DOE projects aimed at characterizing geothermal and mineral systems, understanding the factors controlling their occurrence, and improving future national resource assessments. The first of these surveys (referred to as GeoDAWN) was collected over northern and western Nevada and eastern California and spans areas of major resource potential associated with the Walker Lane and western Great Basin. This includes Clayton Valley, which hosts substantial lithium brine and clay resources, and the Humboldt Mafic Complex, which constitutes a potentially important resource of critical minerals (including cobalt, rare earth elements, platinum group elements, iron, chromium, nickel, and copper). The second survey area (referred to as GeoFlight) is focused over the Salton Trough in southern California that contains some of the largest and hottest known hydrothermal systems in the world, as well as a substantial lithium brine resource that could potentially meet the nation’s lithium demand for electric vehicles. Data from both surveys will be made publicly available through USGS publications and online data repositories. Future efforts under this collaboration are presently being evaluated and may involve acquisition of other data sets such as airborne gravity, electromagnetic or hyperspectral data to address research targets.

Conference Paper↗

Fundamental framework geology in the southern Appalachian crystalline core: The U.S. Geological Survey National Cooperative Geologic Mapping Program (FEDMAP Component) Piedmont-Blue Ridge pPoject

The USGS NCGMP Piedmont-Blue Ridge (PBR) Project aims to develop 4D geologic framework models across the southern Appalachian orogen. The primary objective of the Project is to construct geologic maps and accompanying GeMS geodatabases at scales of 1:24K and 1:100K across the VA-NC-TN state lines where existing geologic map coverage is not adequate (>1:250K) to solve societal and scientific challenges. Two tasks and regional field areas comprise the PBR Project: (1) Piedmont Geology Along the Southeastern Fall Zone, Virginia and North Carolina focuses on eastern Piedmont geology from Richmond, Virginia to Rocky Mount, North Carolina; and (2) Blue Ridge-Inner Piedmont geology covers from the junction of Virginia, North Carolina, and Tennessee eastward into the Piedmont. Both areas host potential critical mineral deposits, including rare earth elements (REE), lithium, tin, and others (e.g., Ti, U, Ta, Nb, Be, Mn, Ba, Zr). Radon in groundwater is a concern in northwestern North Carolina and southwestern Virginia where preliminary investigation suggests a correlation between REE concentration and radon/uranium in certain rock units and major shear zones. The Fall Zone in southeastern Virginia and northeastern North Carolina is the recharge area for the largest aquifer (Cretaceous Potomac Group) on the southeastern seaboard; this region also hosts marketable deposits of REE-bearing heavy minerals. Slope-stability and earthquake hazards are issues in both areas. Developing the 4-D geologic framework of these relatively unexplored regions and producing seamless geologic maps and geodatabases is necessary to address societal needs and resolve “state-line border faults”. Both Tasks work closely with USGS NCGMP STATEMAP and EDMAP components to further the overall goals of the Program.

North Carolina, Virginia↗

Impact of down-dip rupture limit and high stress drop subevents on coseismic land-level change during Cascadia megathrust earthquakes

Seismic hazard associated with Cascadia megathrust earthquakes is strongly dependent on the landward rupture extent and heterogeneous fault properties. We use 3-D numerical simulations and a seismic velocity model for Cascadia to estimate coseismic deformation due to ~M9 earthquake scenarios. Our earthquake source model is based on observations of the 2010 M8.8 Maule and 2011 M9.0 Tohoku earthquakes, which exhibited distinct strong-motion-generating subevents in the deeper portions of the fault. We compare our estimates for land-level change to paleoseismic estimates for coseismic coastal subsidence during the A.D. 1700 Cascadia earthquake. Results show that megathrust rupture extending to the 1 cm/yr locking contour provides a good match to geologic data, and along-strike variations in coastal subsidence can be produced by including strong-motion-generating subevents in the down-dip regions of the megathrust. This work demonstrates the potential to improve seismic hazard estimates for Cascadia earthquakes by comparing physics-based earthquake simulations with geologic observations.

Cascadian Fault↗

Induced earthquake and liquefaction hazards in Oklahoma, USA: Constraints from InSAR

Oklahoma experienced three earthquakes of M w 5.0 or greater in 2016: the 13-Feb. Fairview earthquake (M w 5.1), the 03-Sep. Pawnee earthquake (M w 5.8), and the 07-Nov. Cushing earthquake (M w 5.0). These events are the first earthquakes in the state exceeding M w 5.0 since the 2011 M w 5.7 Prague earthquake and likely result from wide-scale deep fluid-injection. We use interferometric synthetic aperture radar (InSAR) observations to quantify the magnitude and location of surface deformation associated with these three events, determine the depth ranges of fault slip, and assess the spatial relationship between fault slip and well-calibrated mainshock and aftershock locations. We also include newly reported, calibrated event locations for the Cushing earthquake. We find that the Pawnee earthquake ruptured within the crystalline basement with the shallowest slip occurring at depths of 3.1–4.3 km. We find a similar, though shallower, crystalline basement source for the Cushing earthquake with a minimum depth to slip of 1.6–2.3 km. Despite the smaller magnitude of the Cushing earthquake, it generated anomalously high ground motions and damage compared to the larger Pawnee and Fairview earthquakes. We postulate that the shallow source of the Cushing earthquakes provides one explanation for the higher than expected ground motions. The Fairview earthquake generated no detectable co-seismic displacements, which is consistent with a relatively deep earthquake source (~8.5 km). We do, however, identify a 16 km stretch of floodplain where widespread liquefaction occurred in response to the Fairview earthquake, and where 30 gas production wells were exposed to surface displacements exceeding 5 cm. Consequently, the depth to crystalline basement, which limits the depth of injection-induced earthquakes in Oklahoma, and the potential for liquefaction are important factors in assessing shaking risk in the central United States.

Oklahoma↗

Comparison of earthquake early warning systems and the national volcano early warning system at the U.S. Geological Survey

Introduction Every year in the United States, natural hazards threaten lives and livelihoods, resulting in thousands of casualties and billions of dollars in damage. The U.S. Geological Survey (USGS) Natural Hazards Mission Area works with many partners to monitor, assess, and research a wide range of natural hazards, including earthquakes and volcanic eruptions. These efforts aim to enhance community preparedness, response, and resilience. The USGS Earthquake Hazards Program (EHP) provides earthquake monitoring and notifications, assesses seismic hazards, and conducts targeted research to reduce the risk of earthquake hazards nationwide. The USGS Volcano Hazards Program (VHP) delivers forecasts, warnings, and information about volcanic hazards based on proactive monitoring of the nation’s active volcanoes and scientific understanding of volcanic processes. The VHP also conducts targeted research on volcanic processes and creates hazards assessments that inform the level of monitoring required at each of the nation’s active volcanoes. Earthquake and volcano early warning systems are essential to disaster risk reduction: they can save lives and reduce property damage by quickly distributing messages and warnings to communities in harm’s way.

Fact Sheet↗