Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Information Series Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
USGS2016

Characterization of sediment and measurement of groundwater levels and temperatures, Camas National Wildlife Refuge, eastern Idaho

The Camas National Wildlife Refuge (Refuge) in eastern Idaho, established in 1937, contains wetlands, ponds, and wet meadows that are essential resting and feeding habitat for migratory birds and nesting habitat for waterfowl. Initially, natural sources of water supported these habitats. However, during the past few decades, climate change and changes in surrounding land use have altered and reduced natural groundwater and surface water inflows such that the wetlands, ponds, and wet meadows are now maintained through water management and groundwater pumping. These water management activities have proven to be inefficient and costly, prompting the Refuge to develop alternative water management options that are more efficient and less expensive. The U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service, is studying the hydrogeology at the Refuge to provide information for developing alternative water management options. The hydrogeologic studies at the Refuge included characterizing the type, distribution, and hydraulic conductivity of surficial sediments and measuring water levels and temperatures in monitoring wells. Four monitoring wells and seven soil probe coreholes were drilled at the Refuge. Seven water level and temperature data loggers were installed in the wells and water levels and temperatures were continuously recorded from November 2014 to June 2016. Sediment cores were collected from the coreholes and sediment type and distribution were characterized from drillers’ notes, geophysical logs, corehole samples, and particle grain-size analysis. The hydraulic conductivities of sediments were estimated using the measured average grain size and the assumed textural maturity of the sediment, and ranged from about 20 to 290 feet per day.

Idaho↗
USGS2012

Ecosystem services valuation to support decisionmaking on public lands—A case study of the San Pedro River watershed, Arizona

This report details the findings of the Bureau of Land Management–U.S. Geological Survey Ecosystem Services Valuation Pilot Study. This project evaluated alternative methods and tools that quantify and value ecosystem services, and it assessed the tools’ readiness for use in the Bureau of Land Management decisionmaking process. We tested these tools on the San Pedro River watershed in northern Sonora, Mexico, and southeast Arizona. The study area includes the San Pedro Riparian National Conservation Area (managed by the Bureau of Land Management), which has been a focal point for conservation activities and scientific research in recent decades. We applied past site-specific primary valuation studies, value transfer, the Wildlife Habitat Benefits Estimation Toolkit, and the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) and Artificial Intelligence for Ecosystem Services (ARIES) models to value locally important ecosystem services for the San Pedro River watershed—water, carbon, biodiversity, and cultural values. We tested these approaches on a series of scenarios to evaluate ecosystem service changes and the ability of the tools to accommodate scenarios. A suite of additional tools were either at too early a stage of development to run, were proprietary, or were place-specific tools inappropriate for application to the San Pedro River watershed. We described the strengths and weaknesses of these additional ecosystem service tools against a series of evaluative criteria related to their usefulness for Bureau of Land Management decisionmaking. Using these tools, we quantified gains or losses of ecosystem services under three categories of scenarios: urban growth, mesquite management, and water augmentation. These results quantify tradeoffs and could be useful for decisionmaking within Bureau of Land Management district or field offices. Results are accompanied by a relatively high level of uncertainty associated with model outputs, valuation methods, and discount rates applied. Further guidance on representing uncertainty and applying uncertain results in decisionmaking would benefit both tool developers and those offices in using ecosystem services to compare management tradeoffs. Decisionmakers and Bureau of Land Management managers at the State-, district-, and field-office level would also benefit from continuing model improvements, training, and guidance on tool use that can be provided by the U.S. Geological Survey, the Bureau of Land Management, and the Department of the Interior. Tradeoffs were identified in the level of effort needed to parameterize and run tools and the amount and quality of information they provide to the decision process. We found the Wildlife Habitat Benefits Estimation Toolkit, Ecosystem Services Review, and United Nations Environment Programme–World Conservation Monitoring Centre Ecosystem Services Toolkit to be immediately feasible for application by the Bureau of Land Management, given proper guidance on their use. It is also feasible for the Bureau of Land Management to use the InVEST model, but in early 2012 the process of parameterizing the model required resources and expertise that are unlikely to be available in most Bureau of Land Management district or field offices. Application of past primary valuation is feasible, but developing new primary-valuation studies is too time consuming for regular application. Value transfer approaches (aside from the Wildlife Habitat Benefits Estimation Toolkit) are best applied carefully on the basis of guidelines described in this report, to reduce transfer error. The ARIES model can provide useful information in regions modeled in the past (Arizona, California, Colorado, and Washington), but it lacks some features that will improve its usability, such as a generalized model that could be applied anywhere in the United States. Eleven other tools described in this report could become useful as the tools more fully develop, in high-profile cases for which additional resources are available for tool application or in case-study regions where place-specific models have already been developed. To improve the value of these tools in decisionmaking, we suggest scientific needs that agencies such as U.S. Geological Survey can help meet—for instance, development and support of data archives. Such archives could greatly reduce resource needs and improve the reliability and consistency of results. Given the rapid state of evolution in the field, periodic follow-up studies on ecosystem services tools would help to ensure that the Bureau of Land Management and other public land management agencies are kept up to date on new tools and features that bring ecosystem services closer to readiness for use in regular decisionmaking.

Arizona;Sonora↗
USGS2015

U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative—2014 annual report

This is the seventh report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual activities conducted by the USGS for addressing specific management needs identified by WLCI partners. In FY2014, there were 26 projects, including a new one that was completed, two others that were also completed, and several that entered new phases or directions. The 26 projects fall into several categories: (1) synthesizing and analyzing existing data to identify current conditions on the landscape and using the data to develop models for projecting past and future landscape conditions; (2) monitoring indicators of ecosystem conditions and the effectiveness of on-the-ground habitat projects; (3) conducting research to elucidate the mechanisms underlying wildlife and habitat responses to changing land uses; (4) managing and making accessible the large number of databases, maps, and other products being developed; and (5) coordinating efforts among WLCI partners, helping them use USGS-developed decision-support tools, and integrating WLCI outcomes with future habitat enhancement and research projects. The new (completed) project was the development and publication of a public outreach piece for visitors of Fossil Butte National Monument. The final product was a USGS Fact Sheet that capitalized on previously collected elk-monitoring data to interpret the ecology of the Monument’s elk population and the importance of the Monument’s habitats to this highly visible wildlife species. One of the completed projects entailed developing and evaluating a synthetic approach to high-resolution satellite imagery for use in effectiveness monitoring, which culminated in a journal article. The other completed project was a coalescing of two similar tasks under data and information management that pertain to Web application development and the development of outreach and graphic products into a single integrated project that focuses on developing and maintaining/upgrading Web applications and other tools for visualizing, mapping, and using geospatial data. Major accomplishments for FY2014 included several publications, including Part B of an energy resources map that (with Part A) depicts coal, wind, oil, gas, oil shale, uranium, and solar energy production in the WLCI region. Two published works associated with sage-grouse included a Wildlife Monograph on prioritizing species’ habitats across large landscapes, multiple seasons, and novel areas (using sage-grouse in Wyoming as an example), and a USGS Data Series report that includes both the data used in the habitat-prioritization models and the habitat prioritization models developed for sage-grouse. Our Science Team also published a framework for conducting large, collaborative projects that rely on geospatial data, and a paper that describes the efficacy of fusing satellite data collected at various resolutions for measuring and monitoring vegetation changes. These products are all invaluable tools for maximizing the efficiency and effectiveness of managing species of concern, conducting future landscape-scale assessments, and monitoring status and trends of landscape conditions. Other highlights of FY2014 included a renewed effort to gather and analyze wildlife and habitat status and trend data for the WLCI Interagency Monitoring Database (IAMD) to assess long-term trends and cumulative effects associated with land-use and climate changes. Water-monitoring efforts included drilling four new groundwater-monitoring wells in the Green and New Fork River basins near the proposed Normally Pressured Lance Formation energy development, and continued data collection at established water-monitoring sites. Three additional wells were sampled as part of the Wyoming Groundwater Monitoring Network, bringing the total to 19 Network wells sampled in the WLCI region since 2010. Combined, these water-monitoring efforts can help to identify potential changes in water quality or levels that may result from land-use changes. Major terrestrial monitoring accomplishments included processing satellite imagery from 1985−2010 to develop a historical perspective of long-term vegetation changes, which can serve as a basis for monitoring current and future trends in sagebrush steppe. Such data are crucial tools for agencies tasked with sage-grouse management and conservation. The USGS WLCI Science Team also continued monitoring and testing methods for evaluating WLCI habitat treatments designed to promote aspen regeneration and enhance sage-grouse habitat, and to assess how those treatments influence invasive species distributions and ungulate herbivory. Highlights included analyzing field data collected to elucidate the relationships between sage-grouse habitat use and the proximity of energy infrastructure, and using new instruments to measure productivity responses of aspen woodlands to various factors. Numerous FY2014 accomplishments specifically addressed agency needs to manage and conserve Wyoming’s wildlife species of concern. A pygmy rabbit habitat model and Wyoming distribution map were completed to identify factors associated with rabbit habitat occupancy. Previous work on sage-grouse population dynamics was expanded to better understand the factors that drive long-term viability of sage-grouse populations and to develop a tool that helps to identify key factors limiting sage-grouse persistence in Wyoming. Field work and data analyses continued for elucidating the relationships between sagebrush songbird abundance and productivity, the intensity of energy development, and community dynamics of nest predators. For the mule deer study, mixed mountain shrublands important to migrating and wintering mule deer were mapped and delivered to WLCI partners. Additionally, the relationships between energy development and crucial winter habitat for mule deer were evaluated, and a new phase of work was implemented to better understand relationships between plant phenology and mule deer migration movements. Finally, initial analyses of data collected to evaluate fish-community composition in relation to habitat quality indicate that water quality, as measured by concentrations of hydrocarbons, water temperature, and others parameters, has been diminished in subwatersheds with higher levels of energy development. Overall, the outcomes and products of these wildlife studies contribute significantly to the information and tools needed for addressing effects of land-use changes on Wyoming’s species of concern. Finally, capabilities of the WLCI Web site and the USGS ScienceBase infrastructure were maintained and upgraded to help ensure access to and efficient use of all the WLCI data, products, assessment tools, and outreach materials that have been developed. Of particular note is the completion of three Web applications developed for mapping (1) the 1900−2008 progression of oil and gas development;(2) the predicted distributions of Wyoming’s Species of Greatest Conservation Need; and (3) the locations of coal and wind energy production, sage-grouse distribution and core management areas, and alternative routes for transmission lines within the WLCI region. Collectively, these applications tools provide WLCI planners and managers with powerful tools for better understanding the distributions of wildlife species and potential alternatives for energy development.

Wyoming↗
USGS2008

Environmental and Biological Data of the Nutrient Enrichment Effects on Stream Ecosystems Project of the National Water Quality Assessment Program, 2003-04

In 2000, the U.S. Environmental Protection Agency began the process of developing regional nutrient criteria for streams and rivers. In response to concerns about nutrients by the U.S. Environmental Protection Agency and others, the U.S. Geological Survey National Water Quality Assessment Program began studying the effects of nutrient enrichment on agricultural stream ecosystems to aid in the understanding of how nutrients affect the biota in agricultural streams. Streams within five study areas were sampled either in 2003 or 2004. These five study areas were located within six NAWQA study units: the combined Apalachicola-Chattahoochee-Flint River Basin (ACFB) and Georgia-Florida Coastal Plain Drainages (GAFL), Central Columbia Plateau?Yakima River Basin (CCYK), Central Nebraska Basins (CNBR), Potomac River?Delmarva Peninsula (PODL), and the White-Miami River Basin (WHMI). Data collected included nutrients (nitrogen and phosphorous) and other chemical parameters, biological samples (chlorophyll, algal assemblages, invertebrate assemblages, and some fish assemblages), stream habitat, and riparian and basin information. This report describes and presents the data collected from these study areas.

Data Series↗
USGS2025

Calibration of the Stream Salmonid Simulator (S3) model to estimate annual survival, movement, and food consumption by juvenile Chinook salmon (Oncorhynchus tshawytscha) in the restoration reach of the Trinity River, California, 2006–18

Executive Summary The Trinity River is managed in two sections: (1) from the upper 64-kilometer “restoration reach” downstream from Lewiston Dam to the confluence with the North Fork Trinity River, and (2) the 120-kilometer lower Trinity River downstream from the restoration reach. The Stream Salmonid Simulator (S3) has been previously applied to these reaches and the Klamath River. To estimate fish growth, past S3 calibration efforts in the Trinity and Klamath Rivers used maximum likelihood methods that considered only the abundance of juvenile Chinook salmon ( Oncorhynchus tshawytscha ) passing a fish trap to estimate survival and movement parameters, but not fish consumption. Previous calibrations did not estimate the average proportion of maximum consumption ( C y ) when estimating survival ( S y ) and movement ( M 0 y ) parameters across years ( y ) of data, but because no other information was available in the literature a fixed value of C y =0.66 was assumed. Therefore, the goal of this report is to present an alternative approach that calibrates the S3 model to multivariate data (that is, abundance and size), enabling the estimation of the average proportion of maximum consumption, in conjunction with survival and movement parameters for a particular migration year. We fit the S3 model to individual years of weekly trap abundance estimates and mean fish sizes (fork length) at the Pear Tree Gulch (hereafter referred to as Pear Tree) fish trap representing the restoration reach. We used the Earth Mover’s Distance (EMD) as the objective value to be minimized in parameter optimization. This approach estimated survival, movement, and consumption parameters for each migration year. Because we had information on the abundance of natural and hatchery produced juvenile salmon at the fish traps, we estimated survival and movement for natural and hatchery fish. S3 is a deterministic life-stage-structured population model that tracks daily growth, movement, and survival of juvenile Chinook Salmon. A key theme of the model is that river discharge affects habitat availability and capacity, which in turn drives density-dependent population dynamics. To explicitly link population dynamics to habitat quality and quantity, the river environment is constructed as a one-dimensional series of linked habitat units, each of which has an associated daily timeseries of discharge, water temperature, and useable habitat area or carrying capacity. In turn, the physical characteristics of each habitat unit and the number of fish occupying each unit drive survival and growth within each habitat unit and movement of fish among habitat units. The physical template of the restoration reach of the Trinity River was classified into 356 meso-habitat units comprised of runs, riffles, and pools. For each habitat unit, we developed a timeseries of daily discharge, water temperature, amount of available spawning habitat, and fry and parr carrying capacity. Capacity time series were constructed using state-of-the-art models of spatially explicit hydrodynamics and quantitative fish habitat relationships developed for the Trinity River. These variables were then used to drive population dynamics such as egg maturation and survival, and in turn, juvenile movement, growth, and survival. We estimated movement, survival, and consumption parameters by calibrating the model to 12 years of weekly juvenile abundance estimates and fish sizes at the Pear Tree fish trap near the downstream end of the restoration reach. We estimated parameters for 12 years that included a wide range of female spawner abundances (1,414–11,494) and water year types (critically dry–extremely wet). We contrast the estimated parameters to the corresponding number of female spawners and the total annual volume of water discharged for the Trinity River (Trinity River Restoration Program; https://www.trrp.net/restoration/flows/summary/ ). The calibration consisted of replicating historical conditions as closely as possible (for example, discharge; temperature; spawner abundance, spawning location and timing, and hatchery releases), and then running the model to predict weekly abundance passing the trap location from each brood year of adults and subsequent migration year of their juvenile progeny. Because density-dependent movement was favored in past evaluations, we estimated S3 parameters based on density-independent survival and density-dependent movement. Likewise, each year’s estimated survival parameter for natural ( S N y ) and hatchery ( S H y ) fish may be interpreted as the mean daily survival probability from emergence or hatchery release to the Pear Tree fish trap. Under density dependence, the estimated movement parameter for natural ( M 0N y ) and hatchery ( M 0H y ) fish represents the intercept of the Beverton-Holt model; the probability of remaining in a habitat at near-zero abundance. We estimated C y by using EMD and incorporating abundance and fish size into model calibration. Average daily proportions of maximum consumption, , across the years were generally high (=0.640; standard deviation (SD) SD=0.176), suggesting that fish were feeding at about two-thirds of expected maximum consumption rates. This average proportion of maximum consumption,is very similar to what has been assumed (=0.66) in previous Trinity and Klamath River S3 calibration and simulation efforts. In 2017, we estimated the lowest C y , suggesting lower average consumption for juvenile salmon in high-discharge water years. When this high discharge year was excluded, there was no apparent trend in C y with annual water volume. Estimates of survival showed little trend over the range in spawner abundances, but a trend towards higher natural and hatchery fish survival with higher annual volumes of water was apparent. Over the 12 years, the average survival of hatchery fish was =0.888 (SD=0.079) and the average survival natural fish was=0.969 (SD=0.01). With respect to fish movement, we estimated higher M 0N y and M 0H y with higher annual volumes of water in the Trinity River. Higher M N0 y or M H0 y suggest greater probability of remaining in a habitat at low fish densities, with potential for density-dependent processes in movement to occur. The highest M 0N y = 0.676 was estimated during brood year 2012, and the overall average for natural fish was =0.276 (SD=0.188) and for hatchery fish was=0.467 (SD=0.235). Under the Beverton-Holt model, as M 0N y or M 0H y approach zero, there is less capacity for change in fish movement as fish density increases. The S3 model was initialized with only the spatiotemporal distribution of spawners, so it performed well at capturing the essential outmigration features that are ultimately governed by rates of growth, movement, and mortality. We used a new optimization method that could accommodate multivariate data on abundance and fish size collected at the Pear Tree fish trap, enabling the calibration of S3 to estimate five parameters for 12 separate years of data. Incorporating weekly fish size data for each year in our parameter optimization process made the estimation of C y possible and represents a step forward in the fitting of the S3 model to fish trap data for the purposes of parameter calibration and the estimation of growth parameters with respect to annual conditions. We identified lack of fit and adding important effects into the S3 model may improve the S3 estimation and simulation of water scenarios. The Trinity River Restoration Program (TRRP) Science Advisory Board recommended that the TRRP focus on developing core elements of a decision support system (DSS; Buffington and others, 2014). Toward that end, the habitat and S3 models described in this report are both core elements of the DSS. The structure of S3 makes it a particularly useful fish production model for the DSS because population dynamics are sensitive to (1) water temperature, (2) daily discharge management, and (3) habitat quality and quantity. Each of these variables are key management parameters under consideration in the TRRP. As such, the S3 model may provide valuable insights into the potentially variable effects of different management decisions on the Trinity River.

California↗
USGS2008

Multibeam Sonar Mapping and Modeling of a Submerged Bryophyte Mat in Crater Lake, Oregon

Traditionally, multibeam data have been used to map sea floor or lake floor morphology as well as the distribution of surficial facies in order to characterize the geologic component of benthic habitats. In addition to using multibeam data for geologic studies, we want to determine if these data can also be used directly to map the distribution of biota. Multibeam bathymetry and acoustic backscatter data collected in Crater Lake, Oregon, in 2000 are used to map the distribution of a deep-water bryophyte mat, which will be extremely useful for understanding the overall ecology of the lake. To map the bryophyte's distribution, depth range, acoustic backscatter intensity, and derived bathymetric index grids are used as inputs into a hierarchical decision-tree classification model. Observations of the bryophyte mat from over 23 line kilometers of lake-floor video collected in the summer of 2006 are used as controls for the model. The resulting map matches well with ground-truth information and shows that the bryophyte mat covers most of the platform surrounding Wizard Island as well as on outcrops around the caldera wall.

Data Series↗
USGS1993

1993 Annual Report: San Francisco estuary regional monitoring program for trace substances

This first annual report of the San Francisco Estuary Regional Monitoring Program contains the results of monitoring measurements made in 1993. Measurements of conventional water quality parameters and trace contaminant concentrations were made at 16 stations throughout the Estuary three times during the year: the wet period (March), during declining Delta outflow (May), and during the dry period (September). Water toxicity tests were conducted at 8 of those stations. Measurements of sediment quality and contaminant concentrations were made at the same 16 stations during the wet and dry sampling periods. Sediment toxicity was measured at 8 of those stations. Transplanted, bagged bivalve bioaccumulation and condition was measured at 11 stations during the wet and dry sampling periods. Water Monitoring. Total or near-total (dissolved + particulate, see text) arsenic, cadmium, selenium, and dissolved (0.45 µm filtered) arsenic, cadmium, copper, nickel, silver, and zinc in water were highest in the South Bay. In general, dissolved metals in water were usually lowest in the Central Bay due to ocean influences. Near-total nickel and total mercury in water were highest in the northern estuary (San Pablo and Suisun Bays). Dissolved chromium and lead were highest at the Sacramento and San Joaquin River confluence stations. Six of the ten dissolved trace metals were highest in March during high runoff. Dissolved and total arsenic, selenium, and near-total cadmium were highest in September. Concentrations of trace organic contaminants are reported for the March sampling period. Total PAHs and PCBs were highest in the South Bay, but PCBs were also high in the Napa River. Dissolved PAHs were highest in the Central Bay, and dissolved PCBs were highest in the Napa River. Total and dissolved pesticides were highest in the Sacramento River and in the Extreme South Bay. Concentrations of trace elements in water (except selenium) were usually closely related with other environmental parameters. Total or near-total metals concentrations in water were most often associated with the amount of particulate material (TSS) in the water. Dissolved concentrations were usually associated with salinity or dissolved organic carbon (DOC) content. Dissolved PAHs were well correlated with TSS, but dissolved and total trace organic contaminants were poorly correlated with other water parameters. Based on deviations from conservative mixing of fresh and salt water, three different patterns of possible sources of metals were identified in 1993. For dissolved chromium and lead, rivers and local runoff appeared to be important sources. For dissolved arsenic, cadmium, copper, and nickel year-round inputs from the South Bay appeared to be important sources. Dissolved mercury, selenium, and zinc were associated with local runoff in the South Bay during the wet period. Dissolved silver did not fit any of these patterns. Although most contaminant concentrations were below water quality objectives, several trace contaminants were above the objectives at some stations. Comparisons to water quality objectives are used as a guide for evaluation of contaminant concentrations, but there are some differences in the way the RMP data are measured and that prescribed for regulatory purposes (see text). Concentrations of 5 metals in water were above EPA or Regional Basin Plan water quality objectives at six stations (see Table 30). Most of these elevated levels occurred at the northern estuary stations. Total PCB concentrations were above EPA human health objectives at all RMP stations. The pesticides chlordane, dieldrin, and DDTs were above the EPA objectives at several RMP stations, particularly at the northern-most, and river confluence stations. Although some of the contaminant concentrations were above water quality objectives, water toxicity tests (96 hour algal growth and 48 hour bivalve larval development tests) did not indicate toxicity (sometimes inconclusive) associated with the water samples collected at any of the RMP stations in 1993. Exposure to Bay San Francisco Estuary Regional Monitoring Program Regional Monitoring Program 1993 Report ii water actually enhanced algal growth at most stations. In addition to the Estuary-wide sampling, the Sacramento and San Joaquin Rivers were sampled upstream from their confluence. Stations in each river were sampled six times over a 6 week period of high flows. In the Sacramento River, seven of the ten dissolved metals measured had concentrations lower than those measured at the river confluence stations. Some metals concentrations in the San Joaquin River were higher, and some were lower than concentrations from the river confluence station. Metals concentrations in the Sacramento River were poorly related to river flow because the station at Rio Vista is under considerable tidal influence. In the San Joaquin River, flows were inversely related to 7 of 10 total metals concentrations. Sediment Monitoring. Concentrations of silver, mercury, and lead in sediment were highest in the South Bay. However, concentrations of most trace metals in sediments were highest in the northern estuary at stations with the finest (silt, clay) sediments. The northern estuary stations with the coarsest (sand, shell) sediments generally had the lowest metals concentrations. There were differences in concentrations of cadmium, lead, and selenium in sediments between the sampling periods, but no consistent trend as to which sampling period had higher values. In September, PAHs and PCBs in sediments were highest in the Central Bay, but pesticides in sediments were highest in the northern estuary and Extreme South Bay. NOAA’s Median Effects Ranges (ERM) for sediments were used as a guide for evaluation of sediment contaminant concentrations. Nickel was the only trace contaminant in sediment above the ERM guidelines, and it was high at all RMP stations. These high levels are probably due to natural, geologic sources. Although sediment contaminant concentrations were below ERMs, sediment toxicity tests (10 day amphipod mortality, and 48 hour bivalve larval development in elutriates) indicated toxicity at all stations tested. Sediment factors that could have caused the toxicity were not investigated. Bivalve Bioaccumulation. Mussels, oysters, and freshwater clams were transplanted to the RMP stations to evaluate bioaccumulation of trace substances. Trace metals were bioaccumulated at nearly all RMP stations. However, arsenic, lead, and mercury did not appear to bioaccumulate. There was generally more bioaccumulation during the dry season than during the wet season. In September, PAHs, PCBs, and pesticides accumulated in all samples. Bioaccumulation of PAHs and pesticides was generally highest at the river confluence stations, and the Napa River. PCBs accumulated most at Redwood Creek. There were substantial differences in the degree of bioaccumulation among the species. Oysters appeared to accumulate higher concentrations of trace metals than the other species, especially copper, which may be a natural phenomenon. There are no established tissue contaminant standards for trace metal and organic contaminants. Therefore, comparisons to Median International Standards (MIS) for human consumption, or U.S. Food and Drug Administration (USFDA) action levels for trace organics are used to evaluate the bioaccumulation results. Concentrations of selenium were higher than MIS guidelines at all stations during the wet season. Other trace metal concentrations were higher than MIS guidelines at various stations during one or the other sampling period. However, none of the bivalves contained concentrations above the USFDA or National Academy of Sciences (NAS) guidelines for trace organic contaminants. The transplanted bivalves survived well at all stations except in the Napa River where less than 35% survived during both sampling seasons. Measures of bivalve condition (dry weight, shell volume) indicated that bivalves deployed in the Central Bay grew significantly, but those at most other stations actually lost weight. Whether these differences were due to natural causes such as salinity or food supply, or to contamination, was not determined. Pilot Studies. Two pilot monitoring studies were conducted in 1993. A pilot study of Estuary hydrography and phytoplankton was conducted by scientists from the U.S. Summary Geological Survey in Menlo Park and U.C. Davis. Water column profiles at up to 37 stations were monitored along a transect of the Estuary run monthly between the South Bay and the Delta. The primary objective of this study was to define physical (salinity, temperature, suspended particulate matter, and light penetration), chemical (dissolved oxygen) and biological (chlorophyll a) characteristics of Estuary water that may influence other chemical and biological reactions. A second objective was to investigate planktonic indicators of ecosystem structure and function. The data collected in 1993 showed the extent and duration of the spring phytoplankton bloom in the South Bay, other localized blooms in the northern estuary, the stratification and mixing associated with the entrapment zone in the northern estuary, and mixing in the Estuary resulting from the high rainfall in 1993. Knowledge of the duration and extent of these natural features of the Estuary provide context for interpretation of the RMP contaminant data collected only 3 times per year. Another pilot study of suspended sediment transport processes was conducted by the USGS in Sacramento. This study used continuous recording sensors at Point San Pablo and the Bay Bridge to measure the amount of suspended sediment in the water at mid-depth and near the bottom, as well as tide height. The objectives of this study were to estimate which factors determine suspended solids concentrations in the Central Bay and to collect time series of suspended solids that are appropriate for continuous monitoring of suspended solids and for calibration and validation of numerical models. The investigators determined that spring tides accounted for most of the variation in suspended solids concentrations at the stations monitored, not runoff from the Sacramento or San Joaquin Rivers, or semidiurnal and diurnal tides. Comparisons were also made between measurements made by the continuous recordings and the RMP samples collected during the regular monitoring cruises. The different ways of measuring TSS were generally comparable, however only 3 measurements per year as made by the RMP could not provide the information of TSS variation actually occurring in the Estuary. This information is important because as shown by the RMP data, total contaminant concentrations in Estuary water is largely dependent on the TSS in the water. This implies that the RMP measurements alone cannot determine accurately the range of contaminant concentrations without better characterizing the dynamics of TSS. The RMP Pilot Studies are important to the developing RMP because they will help put RMP measurements into the perspective of Estuary processes and mechanisms at other time scales. The studies can relate those processes to the RMP measurements and will facilitate revision of sampling design and interpretation. Summaries of other monitoring activities pertinent to regional monitoring are also included in the Report: a description of the Regional Board’s Bay Protection Studies, the Sacramento Coordinated Monitoring Program, and a wetlands monitoring plan are included.

California↗
USGS2018

Model structure of the stream salmonid simulator (S3)—A dynamic model for simulating growth, movement, and survival of juvenile salmonids

Fisheries and water managers often use population models to aid in understanding the effect of alternative water management or restoration actions on anadromous fish populations. We developed the Stream Salmonid Simulator (S3) to help resource managers evaluate the effect of management alternatives on juvenile salmonid populations. S3 is a deterministic stage-structured population model that tracks daily growth, movement, and survival of juvenile salmon. A key theme of the model is that river flow affects habitat availability and capacity, which in turn drives density dependent population dynamics. To explicitly link population dynamics to habitat quality and quantity, the river environment is constructed as a one-dimensional series of linked habitat units, each of which has an associated daily time series of discharge, water temperature, and usable habitat area or carrying capacity. The physical characteristics of each habitat unit and the number of fish occupying each unit, in turn, drive survival and growth within each habitat unit and movement of fish among habitat units. The purpose of this report is to outline the underlying general structure of the S3 model that is common among different applications of the model. We have developed applications of the S3 model for juvenile fall Chinook salmon ( Oncorhynchus tshawytscha ) in the lower Klamath River. Thus, this report is a companion to current application of the S3 model to the Trinity River (in review). The general S3 model structure provides a biological and physical framework for the salmonid freshwater life cycle. This framework captures important demographics of juvenile salmonids aimed at translating management alternatives into simulated population responses. Although the S3 model is built on this common framework, the model has been constructed to allow much flexibility in application of the model to specific river systems. The ability for practitioners to include system-specific information for the physical stream structure, survival, growth, and movement processes ensures that simulations provide results that are relevant to the questions asked about the population under study.

Open-File Report↗
USGS2015

Sea-floor texture and physiographic zones of the inner continental shelf from Salisbury to Nahant, Massachusetts, including the Merrimack Embayment and Western Massachusetts Bay

A series of maps that describe the distribution and texture of sea-floor sediments and physiographic zones of Massachusetts State waters from Nahant to Salisbury, Massachusetts, including western Massachusetts Bay, have been produced by using high-resolution geophysical data (interferometric and multibeam swath bathymetry, lidar bathymetry, backscatter intensity, and seismic reflection profiles), sediment samples, and bottom photographs. These interpretations are intended to aid statewide efforts to inventory and manage coastal and marine resources, link with existing data interpretations, and provide information for research focused on coastal evolution and environmental change. Marine geologic mapping of the inner continental shelf of Massachusetts is a statewide cooperative effort of the U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management.

Massachusetts↗
USGS1974

Crest-stage gaging stations in Oregon: a compilation of peak data collected from October 1952 to September 1974

A crest-stage gaging station provides an excellent means for determining peak water-surface elevations at a selected location on a stream channel. When related to streamflow, these data provide hydrologists with a knowledge of the flood experience of a drainage basin. If an adequate flood history is known, it is possible to estimate the probable magnitude and frequency of floods likely to occur in that basin, and this information is a valuable asset to anyone who must estimate design floods at proposed drainage structures. However, most design problems involve estimating peak flows on ungaged streams. This is difficult because the rate of storm runoff is not the same in all basins due to the influence of various basin characteristics which can either assist or retard the runoff. The crest-stage gaging program in Oregon is designed to provide a representative sampliing of peak flows at basins having a wide range in characteristics. Then, after sufficient data are collected, a statistical analysis can be made which will provide a means for estimating design floods at ungaged sites on the basis of known basin characteristics. This report is one of a series presenting a compilation of peak data collected at 232 crest-stage gaging stations in Oregon. The collection and publication of these data are made possible through mutual funding by State and Federal agencies. The Geological Survey, the Oregon State Highway Commission, the Federal Highway Administration, and the Bureau of Land Management are currently supporting 160 active crest-stage stations in Oregon.

Oregon↗
USGS2014

Wind River subbasin restoration: U.S. Geological Survey annual report November 2012 through December 2013

Executive Summary The Wind River subbasin in southwest Washington State provides habitat for a population of wild Lower Columbia River steelhead Oncorhynchus mykiss . There have been no hatchery steelhead planted in the Wind River subbasin since 1994, and hatchery adults are estimated to be less than one percent of adults in any year (pers comm. Thomas Buehrens, Washington Department of Fish and Wilflife). We used Passive Integrated Transponder (PIT)-tagging and a series of instream PIT-tag interrogation systems (PTIS) to investigate life-histories, populations, and efficacy of habitat restoration actions for these steelhead. Data from our study, and companion work by Washington Department of Fish and Wildlife (WDFW), will contribute to Bonneville Power Administration’s (BPA) Research Monitoring and Evaluation (RM&E) Program Strategy of Fish Population Status Monitoring ( www.cbfish.org/ProgramStrategy.mvc/ViewProgramStrategySummary/1 ), specifically the sub-strategies of: 1) Assessing the Status and Trends of Diversity of Natural Origin Fish Populations and to uncertainties research regarding differing life histories of a wild steelhead population, 2) Assessing the Status and Trend of Adult Natural Origin Fish Populations, and 3) Monitoring and Evaluating the Effectiveness of Tributary Habitat Actions Relative to Environmental, Physical, or Biological Performance Objectives. During summer 2013, we PIT-tagged parr steelhead in headwater areas of the Wind River subbasin to investigate variable life-histories, specifically to compare fate of those juvenile steelhead that move downstream prior to smolting with those that remain in their natal areas until smolting. A series of instream PTISs monitored movement of these fish. Detections at the instream PTISs showed trends of parr emigration during summer and fall, in addition to the expected movement of parr and smolts in spring. Long-term monitoring of PIT-tagged fish over multiple years will provide information on contribution of various life-history strategies to smolt production and adult returns, as well as helping to identify factors influencing parr movement. Movements of PIT-tagged adult steelhead were tracked with our instream PTISs. These data have provided information on timing of adult movements to various parts of the watershed, which is allowing us to assess adult returns to tributary watersheds within the Wind River subbasin. Determination of adult use of tributary watersheds has provided data that will contribute to evaluating the efficacy of the removal of Hemlock Dam from Trout Creek. Hemlock Dam, located at rkm 2.0 of Trout Creek was removed in summer 2009 and had contributed to hydrologic impairment of Trout Creek. Evaluating restoration efforts is of interest to many managers and agencies so that funding and time are allocated for best results. The evaluation of various life-histories of Lower Columbia River steelhead within the Wind River subbasin will provide information to better track populations, and to direct habitat restoration and water allocation planning. Increasingly detailed Viable Salmonid Population information, such as that provided by PIT-tagging and instream PTISs networks like those we are building and operating in the Wind River subbasin, will provide data to inform policy and management, as life-history strategies and production bottlenecks are identified and understood.

Washington↗
USGS2011

Spatially pooled depth-dependent reservoir storage, elevation, and water-quality data for selected reservoirs in Texas, January 1965-January 2010

The U.S. Geological Survey (USGS), in cooperation with Texas Tech University, constructed a dataset of selected reservoir storage (daily and instantaneous values), reservoir elevation (daily and instantaneous values), and water-quality data from 59 reservoirs throughout Texas. The period of record for the data is as large as January 1965-January 2010. Data were acquired from existing databases, spreadsheets, delimited text files, and hard-copy reports. The goal was to obtain as much data as possible; therefore, no data acquisition restrictions specifying a particular time window were used. Primary data sources include the USGS National Water Information System, the Texas Commission on Environmental Quality Surface Water-Quality Management Information System, and the Texas Water Development Board monthly Texas Water Condition Reports. Additional water-quality data for six reservoirs were obtained from USGS Texas Annual Water Data Reports. Data were combined from the multiple sources to create as complete a set of properties and constituents as the disparate databases allowed. By devising a unique per-reservoir short name to represent all sites on a reservoir regardless of their source, all sampling sites at a reservoir were spatially pooled by reservoir and temporally combined by date. Reservoir selection was based on various criteria including the availability of water-quality properties and constituents that might affect the trophic status of the reservoir and could also be important for understanding possible effects of climate change in the future. Other considerations in the selection of reservoirs included the general reservoir-specific period of record, the availability of concurrent reservoir storage or elevation data to match with water-quality data, and the availability of sample depth measurements. Additional separate selection criteria included historic information pertaining to blooms of golden algae. Physical properties and constituents were water temperature, reservoir storage, reservoir elevation, specific conductance, dissolved oxygen, pH, unfiltered salinity, unfiltered total nitrogen, filtered total nitrogen, unfiltered nitrate plus nitrite, unfiltered phosphorus, filtered phosphorus, unfiltered carbon, carbon in suspended sediment, total hardness, unfiltered noncarbonate hardness, filtered noncarbonate hardness, unfiltered calcium, filtered calcium, unfiltered magnesium, filtered magnesium, unfiltered sodium, filtered sodium, unfiltered potassium, filtered potassium, filtered chloride, filtered sulfate, unfiltered fluoride, and filtered fluoride. When possible, USGS and Texas Commission on Environmental Quality water-quality properties and constituents were matched using the database parameter codes for individual physical properties and constituents, descriptions of each physical property or constituent, and their reporting units. This report presents a collection of delimited text files of source-aggregated, spatially pooled, depth-dependent, instantaneous water-quality data as well as instantaneous, daily, and monthly storage and elevation reservoir data.

Texas↗
USGS2002

Digital Bathymetric Model of Mono Lake, California

In 1986 and 1987, Pelagos Corporation of San Diego (now Racal Pelagos) undertook a bathymetric survey of Mono Lake in eastern California for the Los Angeles Department of Water and Power (DWP). The result of that survey was a series of maps at various scales and contour intervals. From these maps, the DWP hoped to predict consequences of the drop in lake level that resulted from their diversion of streams in the Mono Basin. No digital models, including shaded-relief and perspective-view renderings, were made from the data collected during the survey. With the permission of Pelagos Corporation and DWP, these data are used to produce a digital model of the floor of Mono Lake. The model was created using a geographic information system (GIS) to incorporate these data with new observations and measurements made in the field. This model should prove to be a valuable tool for enhanced visualization and analyses of the floor of Mono Lake.

Miscellaneous Field Studies Map↗
USGS1995

Historical Landsat data comparisons: illustrations of the Earth's changing surface

The U.S. Geological Survey's (USGS) EROS Data Center (EDC) has managed the Landsat data archive for more than two decades. This archive provides a rich collection of information about the Earth's land surface. Major changes to the surface of the planet can be detected, measured, and analyzed using Landsat data. The effects of desertification, deforestation, pollution, cataclysmic volcanic activity, and other natural and anthropogenic events can be examined using data acquired from the Landsat series of Earth-observing satellites. The information obtainable from the historical and current Landsat data play a key role in studying surface changes through time. This document provides an overview of the Landsat program and illustrates the application of the data to monitor changes occurring on the surface of the Earth. To reveal changes that have taken place within the past 20 years, pairs and triplicates of images were constructed from the Landsat multispectral scanner (MSS) and thematic mapper (TM) sensors. Landsat MSS data provide a historical record of the Earth's land surface from the early 1970's to the early 1990's. Landsat TM data provide land surface information from the early 1980's to the present.

Report↗
USGS2008

Total mercury, methylmercury, methylmercury production potential, and ancillary streambed-sediment and pore-water data for selected streams in Oregon, Wisconsin, and Florida, 2003-04

Mercury contamination of aquatic ecosystems is an issue of national concern, affecting both wildlife and human health. Detailed information on mercury cycling and food-web bioaccumulation in stream settings and the factors that control these processes is currently limited. In response, the U.S. Geological Survey (USGS) National Water-Quality Assessment Program (NAWQA) conducted detailed studies from 2002 to 2006 on various media to enhance process-level understanding of mercury contamination, biogeochemical cycling, and trophic transfer. Eight streams were sampled for this study: two streams in Oregon, and three streams each in Wisconsin and Florida. Streambed-sediment and pore-water samples were collected between February 2003 and September 2004. This report summarizes the suite of geochemical and microbial constituents measured, the analytical methods used, and provides the raw data in electronic form for both bed-sediment and pore-water media associated with this study.

Oregon, Wisconsin, Florida↗
USGS2016

Identify potential lock treatment options to prevent movement of aquatic invasive species through the Chicago Area Waterways System (CAWS)

Introduction The Illinois River is a primary tributary of the Mississippi River, connecting with the Mississippi at Grafton, Illinois. The headwaters of the river are at the confluence of the Des Plaines and Kankakee Rivers in eastern Grundy County, Illinois. Approximately 273 miles long, it runs through the heart of Illinois and is the connection between the Mississippi River and Lake Michigan in the Great Lakes basin. Because of this connection, there is concern about the potential for introduced aquatic species in one basin to migrate through this connection into the other basin. A prime example of this are the Asian carps, which were introduced into commercial fishing ponds in Arkansas in the 1970s and, following escape, are now making their way up the Mississippi, Illinois, and Missouri Rivers. Options are being investigated to minimize or prevent non-native aquatic species from invading either basin through the Illinois River connection and eventually having detrimental impacts on the basin into which they migrate. The Illinois River has a series of locks and dams that are used to facilitate the navigation of commercial and recreational shipping from Chicago to Beardstown, Illinois. One option under consideration is to develop a lock treatment process that stops aquatic invasive species from entering (and moving through) the Chicago Area Waterway System (CAWS), while at the same time not unduly impeding the movement of barges and other boat traffic between Lake Michigan and the Mississippi River. The purpose this report was to evaluate the feasibility of using chemical and (or) physical treatments to determine if a sufficiently efficacious option could be used to prevent aquatic invasive species from being transported through the locks. Approximately 30 chemical and physical control options were evaluated on the basis of nine factors ranging from viability for use on a large scale, rapid lethality, human health effects, and potential damage to lock structures and vessel hulls. Compatibility of the various options was also evaluated to assess the possibility that options could be combined to enhance efficacy. Engineering requirements were not considered as part of this evaluation. The available information suggests that hot water at 43 °C and ozone are the most feasible options.

Chicago Area Waterway System↗
USGS2008

TerraLook: GIS-Ready Time-Series of Satellite Imagery for Monitoring Change

TerraLook is a joint project of the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA) Jet Propulsion Laboratory (JPL) with a goal of providing satellite images that anyone can use to see changes in the Earth's surface over time. Each TerraLook product is a user-specified collection of satellite images selected from imagery archived at the USGS Earth Resources Observation and Science (EROS) Center. Images are bundled with standards-compliant metadata, a world file, and an outline of each image's ground footprint, enabling their use in geographic information systems (GIS), image processing software, and Web mapping applications. TerraLook images are available through the USGS Global Visualization Viewer (http://glovis.usgs.gov).

Fact Sheet↗
USGS2014

Model documentation for relations between continuous real-time and discrete water-quality constituents in Indian Creek, Johnson County, Kansas, June 2004 through May 2013

Johnson County is the fastest growing county in Kansas, with a population of about 560,000 people in 2012. Urban growth and development can have substantial effects on water quality, and streams in Johnson County are affected by nonpoint-source pollutants from stormwater runoff and point-source discharges such as municipal wastewater effluent. Understanding of current (2014) water-quality conditions and the effects of urbanization is critical for the protection and remediation of aquatic resources in Johnson County, Kansas and downstream reaches located elsewhere. The Indian Creek Basin is 194 square kilometers and includes parts of Johnson County, Kansas and Jackson County, Missouri. Approximately 86 percent of the Indian Creek Basin is located in Johnson County, Kansas. The U.S. Geological Survey, in cooperation with Johnson County Wastewater, operated a series of six continuous real-time water-quality monitoring stations in the Indian Creek Basin during June 2011 through May 2013; one of these sites has been operating since February 2004. Five monitoring sites were located on Indian Creek and one site was located on Tomahawk Creek. The purpose of this report is to document regression models that establish relations between continuously measured water-quality properties and discretely collected water-quality constituents. Continuously measured water-quality properties include streamflow, specific conductance, pH, water temperature, dissolved oxygen, turbidity, and nitrate. Discrete water-quality samples were collected during June 2011 through May 2013 at five new sites and June 2004 through May 2013 at a long-term site and analyzed for sediment, nutrients, bacteria, and other water-quality constituents. Regression models were developed to establish relations between discretely sampled constituent concentrations and continuously measured physical properties to estimate concentrations of those constituents of interest that are not easily measured in real time because of limitations in sensor technology and fiscal constraints. Regression models for 28 water-quality constituents were developed and documented. The water-quality information in this report is important to Johnson County Wastewater because it allows the concentrations of many potential pollutants of interest, including nutrients and sediment, to be estimated in real time and characterized during conditions and time scales that would not be possible otherwise.

Kansas↗