Search USGS⌕ Search

SEARCH · Search USGS

Results for “Stages”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

Flood-inundation maps for the Saddle River from Upper Saddle River Borough to Saddle River Borough, New Jersey, 2013

Digital flood-inundation maps for a 4.1-mile reach of the Saddle River from 0.6 miles downstream from the New Jersey-New York State boundary in Upper Saddle River Borough to 0.2 miles downstream from the East Allendale Road bridge in Saddle River Borough, New Jersey, were created by the U.S. Geological Survey (USGS) in cooperation with the New Jersey Department of Environmental Protection (NJDEP). The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to select water levels (stages) at the USGS streamgage 01390450, Saddle River at Upper Saddle River, New Jersey. Current conditions for estimating near real-time areas of inundation using USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/nwis/uv?site_no=01390450. The National Weather Service (NWS) forecasts flood hydrographs at many places that are often collocated with USGS streamgages. NWS-forecasted peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the most current stage-discharge relations (in effect March 2013) at USGS streamgage 01390450, Saddle River at Upper Saddle River, New Jersey, and documented high-water marks from recent floods. The hydraulic model was then used to determine eight water-surface profiles for flood stages at 0.5-foot (ft) intervals referenced to the streamgage datum, North American Vertical Datum of 1988 (NAVD 88), and ranging from bankfull, 0.5 ft below NWS Action Stage, to the upper extent of the stage-discharge rating which is approximately 1 ft higher than the highest recorded water level at the streamgage. Action Stage is the stage which when reached by a rising stream the NWS or a partner needs to take some type of mitigation action in preparation for possible significant hydrologic activity. The simulated water-surface profiles were then combined with a geographic information system 3-meter (9.84 ft) digital elevation model (derived from Light Detection and Ranging (LiDAR) data) in order to delineate the area flooded at each water level. The availability of these maps along with real-time streamflow data and information regarding current stage from USGS streamgages and forecasted stream stages from the NWS provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, as well as for post-flood recovery efforts.

New Jersey↗

Flood inundation maps for the Wabash and Eel Rivers at Logansport, Indiana

Digital flood-inundation maps for an 8.3-mile reach of the Wabash River and a 7.6-mile reach of the Eel River at Logansport, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage Wabash River at Logansport, Ind. (sta. no. 03329000) and USGS streamgage Eel River near Logansport, Ind. (sta. no. 03328500). Current conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/ . In addition, information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system http:/water.weather.gov/ahps/ ). The NWS forecasts flood hydrographs at many places that are often colocated with USGS streamgages. NWS-forecasted peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. For this study, flood profiles were computed for the stream reaches by means of a one-dimensional step-backwater model developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the most current stage-discharge relations at USGS streamgages 03329000, Wabash River at Logansport, Ind., and 03328500, Eel River near Logansport, Ind. The calibrated hydraulic model was then used to determine five water-surface profiles for flood stage at 1-foot intervals referenced to the Wabash River streamgage datum, and four water-surface profiles for flood stages at 1-foot intervals referenced to the Eel River streamgage datum. The stages range from bankfull to approximately the highest stages that have occurred since 1967 when three flood control dams were built upstream of Logansport, Ind. The simulated water-surface profiles were then combined with a geographic information system (GIS) digital elevation model (DEM, derived from Light Detection and Ranging [lidar] data having a 0.37-foot vertical accuracy and 3.9-foot horizontal resolution) in order to delineate the area flooded at each stage. The availability of these maps, along with information available on the Internet regarding current stages from the USGS streamgages at Logansport, Ind., and forecasted stream stages from the NWS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post flood recovery efforts.

Indiana↗

Movement of the saltwater interface in the surficial aquifer system in response to hydrologic stresses and water-management practices, Broward County, Florida

A study was conducted to evaluate the relation between water-level fluctuations and saltwater intrusion in Broward County, Florida. The objective was achieved through data collection at selected wells in Broward County and through the development of a variable-density ground-water flow model. The numerical model is representative of many locations in Broward County that contain a well field, control structure, canal, the Intracoastal Waterway, and the Atlantic Ocean. The model was used to simulate short-term movement (from tidal fluctuations to monthly changes) and long-term movement (greater than 10 years) of the saltwater interface resulting from changes in rainfall, well-field withdrawals, sea-level rise, and upstream canal stage. The SEAWAT code, which is a combined version of the computer codes, MODFLOW and MT3D, was used to simulate the complex variable-density flow patterns. Model results indicated that the canal, control structure, and sea level have major effects on ground-water flow. For periods greater than 10 years, the upstream canal stage controls the movement and location of the saltwater interface. If upstream canal stage is decreased by 1 foot (0.3048 meter), the saltwater interface takes 50 years to move inland and stabilize. If the upstream canal stage is then increased by 1 foot (0.3048 meter), the saltwater interface takes 90 years to move seaward and stabilize. If sea level rises about 48 centimeters over the next 100 year as predicted, then inland movement of the saltwater interface may cause well-field contamination. For periods less than 10 years, simulation results indicated that a 3-year drought with increased well-field withdrawals probably will not have long-term effects on the position of the saltwater interface in the Biscayne aquifer. The saltwater interface returns to its original position in less than 10 years. Model results, however, indicated that the interface location in the lower part of the surficial aquifer system takes longer than 10 years to recover from a drought. Additionally, rainfall seems to have the greatest effect on saltwater interface movement in areas some distance from canals, but the upstream canal stage has the greatest effect on the movement of the saltwater interface near canals. Field data indicated that saltwater interface movement includes short-term fluctuations caused by tidal fluctuations and long-term seasonal fluctuations. Statistical analyses of daily-averaged data indicated that the saltwater interface moves in response to pumpage, rainfall, and upstream canal stage. In areas near the canal, the saltwater interface is most affected by canal stage because water-management structures control the stage in the upstream part of the canal and allow movement of the saltwater interface. In areas away from the canal, the saltwater interface is most affected by pumpage and rainfall, depending on the location of well fields. Data analyses also revealed that rainfall changes the vertical flow direction in the Biscayne aquifer. Results from the study indicated that upstream canal stage substantially affects the long-term position of the saltwater interface in the surficial aquifer system. The saltwater interface moves faster inland than seaward because of changes in upstream canal stage. For short-term problems, such as drought, the threat of saltwater intrusion in the Biscayne aquifer does not appear to be severe if the well-field withdrawal is increased; however, this conclusion is based on the assumption that well-field withdrawals will decrease once the drought is over. Sea-level rise may be a potential threat to the water supply in Broward County as the saltwater interface moves inland toward well fields.

Florida↗

Flood-inundation maps for the White River at Indianapolis, Indiana, 2014

Digital flood-inundation maps for a 6.4-mile reach of the White River in Indianapolis, Indiana, from 0.3 miles upstream of Michigan Street to the Harding Street Generating Station dam (at the confluence with Lick Creek), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the White River at Indianapolis, Ind. (station number 03353000). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at http://water.weather.gov/ahps/ , which also forecasts flood hydrographs at this site. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the current stage-discharge relations at three USGS streamgages: the White River at Indianapolis (station number 03353000), the White River at Michigan Street at Indianapolis (station number 03352953), and the White River at Stout Generating Station at Indianapolis (station number 03353611). The hydraulic model was then used to compute 11 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the White River at Indianapolis streamgage datum and ranging from 10 ft, or the NWS “action stage,” to 20 ft, which is the highest stage in the stage-discharge relation for the streamgage and the NWS “moderate flood stage.” The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from light detection and ranging [lidar] data having a vertical 0.183-ft root mean squared error and 5.0-ft horizontal resolution) to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Indiana↗

Flood-inundation maps for the Green River in Colrain, Leyden, and Greenfield, Massachusetts, from U.S. Geological Survey streamgage 01170100 Green River near Colrain to the confluence with the Deerfield River

The U.S. Geological Survey developed flood elevations in cooperation with the Federal Emergency Management Agency for a 14.3-mile reach of the Green River in Colrain, Leyden, and Greenfield, Massachusetts, to assist landowners and emergency management workers to prepare for and recover from floods. The river reach extends from the U.S. Geological Survey Green River near Colrain, MA (01170100) streamgage downstream to the confluence with the Deerfield River. A series of seven digital flood inundation maps were developed for the upper 4.4 miles of the river reach downstream from the stream. Flood discharges corresponding to the 50-, 10-, 1-, and 0.2-percent annual exceedance probabilities were computed for the reach from updated flood-frequency analyses. These peak flows and the flood flows associated with the stages of 10.2, 12.4, and 14.4 feet (ft) at the Green River streamgage were routed through a one-dimensional step-backwater hydraulic model to obtain the corresponding peak water-surface elevations and to place the Tropical Storm Irene flood of August 28, 2011 (stage 13.97 ft), into historical context. The hydraulic model was calibrated by using the current (2015) stage-discharge relation at the U.S. Geological Survey Green River near Colrain, MA (01170100) streamgage and from documented high-water marks from the Tropical Storm Irene flood, which had a flow higher than a 0.2-percent annual exceedance probability flood discharge. The hydraulic model was used to compute water-surface profiles for flood stages referenced to the streamgage and ranging from the 50-percent annual exceedance probability (bankfull flow) at 7.6 ft (439.8 ft above the North American Vertical Datum of 1988 [NAVD 88]) to 14.4 ft (446.7 ft NAVD 88), which exceeds the maximum recorded water level of 13.97 ft (Tropical Storm Irene) at the streamgage. The mapped stages of 7.6 to 14.4 ft were selected to match the stages for bankfull; the 50-, 10-, 1-, and 0.2-percent annual exceedance probabilities; incremental stages of 10.2 and 12.4 ft; and the maximum stage of the stage-discharge rating curve. The simulated water-surface profiles were combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data having a 0.5-ft vertical accuracy to create a set of flood-inundation maps. The availability of the flood-inundation maps, combined with information regarding near real-time stage from U.S. Geological Survey Green River near Colrain, MA (01170100) streamgage, can provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, and postflood recovery efforts. The flood-inundation maps are nonregulatory but provide Federal, State, and local agencies and the public with estimates of the potential extent of flooding during selected peak-flow events.

Massachusetts↗

Development of a hydraulic model and flood-inundation maps for the Wabash River near the Interstate 64 Bridge near Grayville, Illinois

A two-dimensional hydraulic model and digital flood‑inundation maps were developed for a 30-mile reach of the Wabash River near the Interstate 64 Bridge near Grayville, Illinois. The flood-inundation maps, which can be accessed through the U.S. Geological Survey (USGS) Flood Inundation Mapping Science web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Wabash River at Mount Carmel, Ill (USGS station number 03377500). Near-real-time stages at this streamgage may be obtained on the internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) at http://water.weather.gov/ahps/ , which also forecasts flood hydrographs at this site (NWS AHPS site MCRI2). The NWS AHPS forecasts peak stage information that may be used with the maps developed in this study to show predicted areas of flood inundation. Flood elevations were computed for the Wabash River reach by means of a two-dimensional, finite-volume numerical modeling application for river hydraulics. The hydraulic model was calibrated by using global positioning system measurements of water-surface elevation and the current stage-discharge relation at both USGS streamgage 03377500, Wabash River at Mount Carmel, Ill., and USGS streamgage 03378500, Wabash River at New Harmony, Indiana. The calibrated hydraulic model was then used to compute 27 water-surface elevations for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from less than the action stage (9 ft) to the highest stage (35 ft) of the current stage-discharge rating curve. The simulated water‑surface elevations were then combined with a geographic information system digital elevation model, derived from light detection and ranging data, to delineate the area flooded at each water level. The availability of these maps, along with information on the internet regarding current stage from the USGS streamgage at Mount Carmel, Ill., and forecasted stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Illinois↗

Flood-inundation maps for Lake Champlain in Vermont and New York

In 2016, digital flood-inundation maps along the shoreline of Lake Champlain in Addison, Chittenden, Franklin, and Grand Isle Counties in Vermont and northern Clinton County in New York were created by the U.S. Geological Survey (USGS) in cooperation with the International Joint Commission (IJC). This report discusses the creation of updated static digital flood-inundation mapping, in 2018, to include the entire shoreline of Lake Champlain in the United States. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent of flooding corresponding to selected water-surface elevations (stages) at the USGS lake gages on Lake Champlain. As a result of the record setting floods of May 2011 in Lake Champlain and the Richelieu River, the U.S. and Canadian governments requested that the IJC issue a reference for a study to identify how flood forecasting, preparedness, and mitigation could be improved in the Lake Champlain–Richelieu River Basin. The IJC submitted the Lake Champlain–Richelieu River Plan of Study to the governments of Canada and the United States in 2013. The flood-inundation maps in this study are one aspect of the task work outlined in the IJC 2013 Plan of Study. Wind and seiche effects (standing oscillating wave with a long wavelength) that can influence flooding along the Lake Champlain shoreline were not represented. The flood-inundation maps reflect 11 stages for Lake Champlain that are static for the entire area of the lake. Near-real-time stages at the USGS gages on Lake Champlain may be obtained from the USGS National Water Information System website at http://waterdata.usgs.gov/ ( https://doi.org/10.5066/F7P55KJN ) or from the National Weather Service Advanced Hydrologic Prediction Service at http://water.weather.gov/ahps/ . Updated static flood-inundation boundary extents were created for Lake Champlain in Franklin, Chittenden, Addison, Rutland, and Grand Isle Counties in Vermont and Clinton, Essex, and Washington Counties in New York by using recently acquired (2009, 2012, 2014, and 2015) light detection and ranging (lidar) data. The corresponding flood-inundation maps may be referenced to any of the four active USGS lake gages on Lake Champlain. Of these four active lake gages, USGS lake gage 04295000, Richelieu River (Lake Champlain) at Rouses Point, N.Y.; USGS lake gage 04294500, Lake Champlain at Burlington, Vt.; USGS lake gage 04279085 Lake Champlain north of Whitehall, N.Y.; and USGS lake gage 04294413, Lake Champlain at Port Henry, N.Y., only the Richelieu River (Lake Champlain) at Rouses Point, N.Y., gage also serves as a National Weather Service prediction location. Lake Champlain static flood-inundation map boundary extents corresponding to the May 2011 peak flood stage (103.20 feet [ft], National Geodetic Vertical Datum of 1929 [NGVD 29], as recorded at the USGS Rouses Point lake gage, were compared to the flood-inundation area extents determined from satellite imagery for the May 2011 flood (which incorporated documented high-water marks from the flood of May 2011) and were found to be in good agreement. The May 2011 flood is the highest recorded lake water level (stage) at the Rouses Point, N.Y., and Burlington, Vt., lake gages. Flood stages greater than 101.5 ft (NGVD 29) exceed the “major flood stage” as defined by the National Weather Service for USGS lake gage 04295000. Updated digital elevation models (DEMs) were created from the recent lidar data for Lake Champlain in Vermont and New York. These DEMs were used in determining the flood-inundation boundary and associated depth grids for 11 flood stages at 0.5-ft or 1-ft intervals from 100.0 to 106.0 ft (NGVD 29) as referenced to the USGS lake gages. In addition, the May 2011 flood-inundation area for elevation 103.20 ft (NGVD 29) (102.77 ft, North American Vertical Datum of 1988) was determined from these updated DEMs. The availability of these maps, along with online information regarding current stages at the USGS lake gages and forecasted high-flow stages from the National Weather Service at USGS lake gage 04295000, Richelieu River (Lake Champlain) at Rouses Point, N.Y., will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

New York, Vermont↗

Flood-Inundation Maps of the Current and Jacks Fork Rivers including the Ozark National Scenic Riverways, Southeast Missouri, 2023

Digital flood-inundation maps for a 131.8-mile reach of the Current River and a 44.6-mile reach of the Jacks Fork River, in southeast Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with the Ozark Foothills Regional Planning Commission and the South Central Ozark Council of Governments. The maps also encompass the 134 miles of the Current and Jacks Fork Rivers within the Ozark National Scenic Riverways, which is the first national park area to protect a river system. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (hereafter referred to as “stages”) at eight reference USGS streamgages—five on the Current River (USGS station numbers 07064440, 07064533, 07066510, 07067000, and 07068000) and three on the Jacks Fork River (USGS station numbers 07065200, 07065495, and 07066000). Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or the National Weather Service National Water Prediction Service at http://water.noaa.gov/ , which also forecasts flood hydrographs at four of these sites (USGS station numbers 07067000, 07068000, 07065495, and 07066000). Flood profiles were computed for seven of the eight map reaches by means of two-dimensional hydraulic models and the remaining reach by a one-dimensional hydraulic model. The models were calibrated by using stage-streamflow relations or streamflow measurements at the USGS streamgages and from high-flow stage measurements from water-level loggers distributed throughout the reaches. The hydraulic models were used to compute water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datums. The profile stages ranged from the National Weather Service “action stage” or near bankfull, to a stage exceeding the highest recorded water level at each streamgage. The simulated water-surface profiles were then combined with a digital elevation model (derived from light detection and ranging data having a nonvegetated vertical accuracy of a maximum 10-centimeter root mean square error) to delineate the area flooded at each water level and the associated water depths. The availability of these maps, along with information regarding current stage from the USGS streamgage and forecasted high-flow stages from the National Weather Service, will provide emergency management personnel, resource managers, and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Missouri↗

Computing discharge using the index velocity method

Application of the index velocity method for computing continuous records of discharge has become increasingly common, especially since the introduction of low-cost acoustic Doppler velocity meters (ADVMs) in 1997. Presently (2011), the index velocity method is being used to compute discharge records for approximately 470 gaging stations operated and maintained by the U.S. Geological Survey. The purpose of this report is to document and describe techniques for computing discharge records using the index velocity method. Computing discharge using the index velocity method differs from the traditional stage-discharge method by separating velocity and area into two ratings—the index velocity rating and the stage-area rating. The outputs from each of these ratings, mean channel velocity (V) and cross-sectional area (A), are then multiplied together to compute a discharge. For the index velocity method, V is a function of such parameters as streamwise velocity, stage, cross-stream velocity, and velocity head, and A is a function of stage and cross-section shape. The index velocity method can be used at locations where stage-discharge methods are used, but it is especially appropriate when more than one specific discharge can be measured for a specific stage. After the ADVM is selected, installed, and configured, the stage-area rating and the index velocity rating must be developed. A standard cross section is identified and surveyed in order to develop the stage-area rating. The standard cross section should be surveyed every year for the first 3 years of operation and thereafter at a lesser frequency, depending on the susceptibility of the cross section to change. Periodic measurements of discharge are used to calibrate and validate the index rating for the range of conditions experienced at the gaging station. Data from discharge measurements, ADVMs, and stage sensors are compiled for index-rating analysis. Index ratings are developed by means of regression techniques in which the mean cross-sectional velocity for the standard section is related to the measured index velocity. Most ratings are simple-linear regressions, but more complex ratings may be necessary in some cases. Once the rating is established, validation measurements should be made periodically. Over time, validation measurements may provide additional definition to the rating or result in the creation of a new rating. The computation of discharge is the last step in the index velocity method, and in some ways it is the most straight-forward step. This step differs little from the steps used to compute discharge records for stage-discharge gaging stations. The ratings are entered into database software used for records computation, and continuous records of discharge are computed.

Techniques and Methods↗

Hydrologic effects of proposed changes in management practices, Winnebago Pool, Wisconsin

Various changes in the management practices for the Winnebago pool have been proposed. The objectives of the proposed changes are protecting wetlands adjacent to the lakes in the pool and assuring adequate flow in the Fox River downstream from Lake Winnebago. Three proposed operation plans for the Winnebago pool were studied to determine the effects on lake stage and discharge. A digital reservoir model simulated daily lake stage and discharge from the Winnebago pool. Inflow for this simulation was computed from daily discharge, recorded at Rapide Croche Dam, and daily stage, recorded at Oshkosh. This computed inflow is net inflow, combining the effects of streamflow, precipitation, evaporation, and net ground-water inflow. The model was adapted to simulate operation of the Winnebago pool according to each of the proposed plans. Because the important features of each operation plan were expressed in terms of stages to be attained at certain dates, simulated discharge was adjusted daily to keep simulated lake stage close to that specified in the plan. The simulated lake stage for each of the proposed plans exceeded the allowable maximum in some years. However, the simulated stage exceeded the allowable maximum less frequently and for shorter periods than did the observed stage. For the 61 years simulated (water years 1918-78), the simulated 7-day, 10- year low flow ((57,10) at Rapide Croche Dam was 1,000 ft^/s compared with 900 ft^/s for the observed record. The 7-day, 2-year low flow (Qy 2) was 1,500 ft^/s (simulated) versus 1,600 ft3/s (observed). The model predicted that executing the proposed operation plan would result in monthly Q7 JQ for August and September of 1,100 ft-Vs. This is no change for August and a 12-percent increase for September. In addition, the study illustrated that the discharge from the Winnebago pool could be managed to guarantee that the discharge in the Fox River downstream would not fall below a specified discharge up to 1,500 ft^/s. In most years this would have no effect on the stage of the pool. In a few years there would be a conflict between releasing water from the pool to maintain the desired discharge and maintaining water levels above the required minimum stage. The frequency of this possible conflict varies with the level of discharge desired in the Fox River from 1 year in 60 for a discharge of 1,100 ft^/s to about 1 year in 15 for a discharge of 1,500 ft^/s.

Wisconsin↗

Geology and ground-water hydrology of the Mokelumne area, California

The Mokelumne River basin of central California comprises portions of the California Trough and the Sierra Nevada section of the Pacific Mountain system. The California Trough is divisible into four subsections-the Delta tidal plain, the Victor alluvial plain, tlie river flood plains and channels, and the Arroyo Seco dissected pediment. These four subsections comprise the land forms produced by the Mokelumne River and other streams since the Sierra Nevada attained its present height in the Pleistocene epoch. The Victor alluvial plain rises eastward from the Delta plain and abuts on the dissected Arroyo Seco pediment; in the Mokelumne area it is 12 to 16 miles wide and slopes between 5 and 8 feet in a mile. It includes relatively extensive tracts that are intensively cultivated and irrigated with water pumped from wells. The Victor plain has been compounded of overlapping alluvial fans along the western base of the Sierra Nevada. It is prolonged eastward into the pediment by tongues of alluvium along several of the present streams; thus it seems likely that the present stream pattern in the eastern part of the area has been fixed since dissection of the pediment began. Three of the four major streams-the Mokelumne and Cosumnes Rivers and Dry Creek-traverse the Victor plain in trenches which are 15 to 40 feet deep at the heads of their respective alluvial fans but which die out toward the west. The floors of these trenches, the historic flood plains, are from 100 yards to a mile wide. The exceptional major stream, which has not entrenched itself, is the Calaveras River. The Arroyo Seco pediment, which lies east of the Victor plain, was initially at least 8 to 15 miles wide and lay along the western foot of the Sierra Nevada entirely .across the Mokelumne area. Its numerous remnants decline 15 to 35 feet in a mile toward the west. The Sierra Nevada section adjoins and lies east of the California Trough. Its major ridge crests define a volcanic plain whose westward slope is' inferred to have been initially about 90 feet in a mile but is now about 180 feet in a mile, owing to tilting of the Sierra Nevada block in Pleistocene time. In and near the Mokelumne area the Sierra Nevada and California Trough together are roughly coextensive with a single structural unit. The Sierra Nevada constitutes a block that has risen with respect to adjoini;ng valley areas 'by simple rotation or tilting toward the west; it has not been warped or faulted -extensively. It is inferred that this block extends westward beneath the thick alluvial deposits of the trough without material warping or faulting. The oldest rocks of the Mokelumne region are the Carboniferous and Jurassic -rocks that compose the crystalline core of the Sierra Nevada. These are overlain unconformably by sediments of Tertiary age--in upward succession the lone, Valley Springs, Mehrten, and J.Jaguna formations. Of these formations all except the lone are newly discriminated, and type sections are described in the full text. These Tertiary sediments form a great wedge, thinnest along the mountain front to the east, where they have been truncated by erosion. They dip about 2° W. The lone formation (Eocene) consists chiefly of sandstone, clay, and shale; its maximum thickness is 450 feet. The Valley Springs formation (middle? Miocene) overlies the lone formation unconformably. It is composed largely of greenish-gray clay, shale, and sandstone derived from rhyolitic ejectamenta. These rhyolitic deposits are confined to narrow channels in the higher part of the Sierra Nevada, but they spread fanlike over the lower western edge of the mountain block, where they attain a maximum thickness of 525 feet. The Mehrten formation (upper? Miocene and lower Pliocene?) comprises the andesitic rocks that constructed the Sierran volcanic plain. In the Mokelumne area it consists chiefly of sandstone and siltstone but includes, as a minor though conspicuous part of the formation, layers and tongues of resistant breccia or agglomerate, which are presumed to have originated as mud flows. Nonfragmental andesite is not known to occur in the Mokelumne area, although several possible vents occur farther east. In the eastern part of the area the Mehrten formation truncates in turn the Valley Springs and lone formations and the pre-Cretaceous rocks; in the western part the Mehrten formation (andesitic) interfingers with the underlying Valley Springs formation (rhyolitic). Its maximum measured thickness is 400 feet. Few of the irrigation wells are so deep that they can be said with assurance to reach the Mehrten formation. The Laguna formation (Pliocene? and possibly lower Pleistocene) comprises poorly sorted, nonandesitic fluviatile sedimentary that overlie the Mehrten formation. It is inferred to be essentially parallel to and tilted equally with the Mehrten formation and to be about 400 feet thick. The Arroyo Seco gravel (presumably middle Pleistocene) veneers the Arroyo Seco pediment. At its easternmost outcrops the formation is composed of pebbles, cobbles, and boulders in a matrix of brick-red sand and silt; farther west, down the slope of the pediment, it becomes pr9gressively finer. It is inferred that the Arroyo Seco gravel is a coarse fraction of the rock waste that was transported from the Sierra Nevada after the Sierran.block was tilted in Pleistocene time. It is inferred further that the correlative of the Arroyo Seco gravel in the California Trough is a wedge-shaped mass of sediments whose base is the tilted Laguna formation and whose top can be interpolated by projecting a hypothetical surface through the remnants of the pediment. The Victor formation comprises the fluviatile sand, silt, and gravel that built the Victor alluvial plain over the hypothetical equivalent of the Arroyo' Seco gravel along the axis of the California Trough and against the western front of the dissected pediment to the east. The formation is thought to be about 100 feet thick along the western margin of the Mokelumne area, according to an estimate based upon projecting the slope of the Arroyo Seco pediment westward beneath the Victor plain. The Mokelumne area lies on the fertile central plain along the Mokelumne River about the city of Lodi, in northern San Joaquin County, and has been intensively developed for the cultivation of grapes, deciduous fruits, and other crops. Of necessity its great productiveness is maintained by irrigation. Extensive irrigation from wells began about 1907 and has increased steadily until in 1932 about 50,000 acres (80 percent of the area) was watered in that manner. The specific question at issue is the extent to which the supply of ground water and hence the productiveness of the area are dependent upon the water flowing in the Mokelumne River and the extent to which that productiveness may be influenced by regulation of the stream--:in particular, by the substantial regulation of the river that is accomplished by the Pardee Dam of the East Bay Municipal Utility District, which began to function in March 1929. The depth of 1,447 irrigation wells in five townships in the central part of the area (T. 3 N., Rs. 6 and 7 E., and T. 4 N., Rs. 6 to 8 E.) ranges from 20 to 910 feet. About half the wells bottom within a 100-foot zone whose base is 75 feet below the projected Arroyo Seco pediment; essentially that zone constitutes the Victor formation. Only 6 percent of the wells bottom within the next lower 25- foot zone, but the percentage increases sharply for depths still greater; it is inferred that impervious strata are relatively persistent between 75 and 100 feet below the projected pediment and that these are the uppermost part of the Arroyo Seco gravel. Of 580 observation wells known to bottom in the Victor formation, essentially all appear to indicate a regional water-table stage; thus the water is essentially unconfined. On the other hand, nearly all wells so deep that they reach the Arroyo Seco gravel or some underlying formation tap confined water. Near the Mokelumne River the water levels in these deep wells stand below the water table, which is semiperched. In most deep wells remote from the river the water level stands above the water table except during the pumping season. Fluctuations of ground-water levels are ascribed to moving or changing load on the land surface, earthquakes, variation of barometic pressure, ground-water draft by vegetation, infiltration of rain and certain indirect effects of rainfall, infiltration of water applied to the land for irrigation, variation in the discharge of streams, and pumping from wells. In the eastern part of the central district, between Clements and the vicinity of Lockeford, it is inferred that (1) the river and the water in the alluvium of the flood plain are not insulated from the water in the sediments that form the adjacent Victor plain; (2) locally if not generally, however, there are discontinuities in pervious strata along the outer margin of the flood plain, where the water table passes from the alluvium into the enclosing sediments, so that percolation of ground water is impeded materially at that margin; (3) rising river stages set up ground-water waves that store relatively large volumes of water in the alluvium close to the river, whereas falling stages cause much of that stored water to percolate back into the river, weeks and even months lapsing before the ground-water stage becomes steady within the flood plain; and (4) seepage loss from the river into the alluvium tends to be intermittent and to alternate with seepage gain, the rate of loss or gain lagging weeks or months behind the fluctuations of river stage and lagging more for moderate changes at low stage. However, in the succeeding reach downstream as far as Woodbridge, it is inferred that percolation of ground water is not impeded generally along the outer margin of the flood plain and that the river tends to lose almost continuously by seepage rather than intermittently, although the rate of loss fluctuates somewhat in response to changing river stage. The yearly pumpage for irrigation has been as much as 114,600 acre-feet (1928- 29), and there have been as many as 2,500 wells equipped with irrigation pumping plants (1931). Commonly the wells are pumped only in daylight and are idle over week-ends and holidays, also during and after protracted rainstorms in the early part of the season. In a small district near Victor pumping in recent years has begun in January or February, has reached its height in March, and largely has passed by April. In outlying districts general pumping has begun as late as May, reached its height in June or July, and waned by September. Since 1907 the water table appears to have declined steadily in most of the Mokelumne area except along the river. The decline was least in the Woodbridge Irrigation District, where in four typical wells. the average decline from 1907 to 1937 was 3 feet, or 0.15 foot a year. Among 18 shallow wells in the district of most intensive pumping the average recession of the water table from 1907 to 1927 was 11 feet, or 0.55 foot a year; the greatest measured recession was 15 feet, or 0.75 foot a year. From 1927 to 1933 the water table declined 5 feet or more over most of the central pumping district except within 2 miles of the Mokelumne River, and the greatest measured decline was 9 feet. The area of material recession ,extends 4 to 7 miles eastward beyond the central pumping district, whence it is inferred that pumping has drawn gradually on remote ground-water storage. It is inferred that the Mokelumne River ordinarily has been a losing stream between the Mehrten dam site, near Clements, and the Woodbridge Dam, the area that received the percolate having been triangular with its upstream and having included about 5,200 acres of the flood plain and 36,500 acres in outlying districts to the north and to the south. Mean fluctuations of the water table within the area receiving percolate from ihe river are believed to indicate that relatively little water is drawn from outside the area. Accordingly, simple storage methods are competent for a ground-water inventory. It is inferred that the rate of seepage loss from the river depends jointly upon river discharge, stage in the Woodbridge Reservoir, and groundwater pumpage. The foregoing inferences lead to the following conclusions with respect to ground-water replenishment by seepage loss from the river in the intensively cultivated district about Lodi: (1) The annual replenishment has tended to increase for at least two decades, owing to the gradual increase in head between surface water and ground water as ground-water levels have been lowered progressively by pumping; (2) annual replenishment has tended to increase, especially in recent years, owing to gradually prolonged use of the Woodbridge Reservoir, for thereby a relatively large wetted area and great differential head have been maintained for an increasing term; (3) the rate of replenishment tends to be greater under regulation than under the so-called natural regimen, to the extent that regulation has maintained a moderately large wetted area and stage in the river through the later part ·of each pumping season, whi1e the ground-water levels have been lowest. Moreover, for any particular yearly run-off below the Mehrten dam site, the replenishment by seepage would tend to be greater under the regulated regimen to the extent that fluctuations in discharge were suppressed, for the greatest yearly mean stage and mean wetted area would be afforded by constant discharge. -Thus, diverting water out of the Mokelumne River Basin at the Pardee Dam does not necessari1y-entail a diminution in ground-water replenishment by seepage loss along the lower reach of the stream, at least in the replenishment beneath the Victor plain above the gaging station at Woodbridge. Rather. the Pardee Dam affords a means for so regulating the discharge as to effect a maximum ground-water replenishment with-a given run-off in the natural channel. Bodies of ground water perched above the regional water table are common in the Laguna formation, especially in its lower part. Conspicuous bodies occur about 3 miles south of Clay, in a district between 1 mile and 5 miles south of Clements, and along Dry Creek in T. 5 N., Rs. 7 and 8 E. From the relation between the water table and the piezometric surface for water confined in deep aquifers, the area receiving percolate from the Mokelumne River may be divided roughly into (1) a central area, extending not :p1ore than half a mi1e beyond the flood plain, in which the piezometric surface is inferred to have stood below the water table throughout the term of the investigation and hence in which the difference in head has favored the percolation of water from shallow beds into deep beds in all seasons, and (2) an outlying area in which the difference in head likewise favors downward percolation into deep beds during the pumping season but favors upward percolation during the nonpumping season. This outlying area includes about 75 percent of the segment of the Victor plain that receives percolate from the river. From 1927 to 1933 the subartesian head that existed during the nonpumping season in the area remote from the river tended to increase; it is therefore inferred that the relative opportunity for seasonal recharge of the shallow water-bearing beds by underfeeding has likewise tended to increase. On the other hand, the negative differential head in wells near the river also has tended to increase; thus in this central area the opportunity for discharge of water from shallow beds by downward percolation has probably tended to increase. It is believed that ground-water storage within the area near the river is not decreased materially by" discharge westward through deep pervious beds, also that the yearly addition to ground-water storage in the outlying area by deep percolation from a remote easterly source is scant and for all practical purposes is offset by downward percolation along the river.

California↗

Aplicación de un modelo basado en procesos de patrones de sismicidad pre – eruptiva al volcán Ubinas, episodio eruptivo 2019

Using a volcanic monitoring data set from Ubinas volcano, we applied a process-based model of pre-eruptive seismic patterns to the 2019 eruptive episode with the goal of identifying possible seismic precursors in order to help forecast future eruptions. This conceptual model, based on geologic processes, is divided into four seismicity stages: Stage 1. Characterized by the occurrence of deep seismicity associated with deep intrusion(s); Stage 2. Occurrence of distal volcano – tectonic seismicity in response to magma intrusion(s) into the upper crustal reservoir; Stage 3. Dominated by seismicity associated with vent – clearing; and Stage 4. Corresponding to the occurrence of repetitive seismicity related with final magma ascent. In the 2019 eruptive episode, we identified the last three stages: seismicity associated with the intrusion of new magma (Stage 2), seismicity associated with an opened and vent – clearing inside of the volcanic system (Stage 3) and repetitive seismicity that suggested the magma ascent towards shallower depths (Stage 4), however, no surficial lava was observed. Because Ubinas is an active system with frequent eruptions, Stage 2 was very brief; however, we were still able to identify the transition from phreatomagmatic to magmatic activity. The model allows us to provide a process-based interpretation to the volcanic monitoring observations from Ubinas volcano. Additionally, this model will aid in future assessment of unrest and contribute to eruption forecasting.

Ubinas Volcano↗

Stable isotope studies of metasomatic Ca-Fe-Al-Si skarns and associated metamorphic and igneous rocks, Osgood Mountains, Nevada

Garnet-pyroxene skarns were formed 90 m.y. B.P. in the Osgood Mountains at or near contacts of grandiorite with calcareous rocks of the Cambrian Preble Formation. The metasomatic replacement followed contact metamorphic recrystallization of the Preble. The sources, temperature, and variation in H2O/CO2 ratios of the metasomatic fluid are interpreted from 269 analyses of oxygen, carbon, hydrogen, and sulfur isotopes in whole rocks, minerals and inclusion fluids. Skarns formed in three mineralogical stages. Oxygen isotope data indicate that temperatures during the crystallization of garnet, pyroxene and wollastonite (Stage I) were least 550 ?? C, and that the metasomatic fluid had an {Mathematical expression} ??? 0.035 in the massive skarns, and ??? 0.12 in vein skarns up to 3 cm thick. Pore fluids in isotopic equilibrium with garnet in calc-silicate metamorphic rocks, on the other hand, had {Mathematical expression} ??? 0.15. The metasomatic fluids of Stage I were derived primarily from the crystallizing magma. The isotopic composition of magmatic water was ??18O =+9.0, ??D= -30 to -45. Oxygen isotope temperatures of greater than 620 ?? C were determined for the granodiorite. Isotopic and chemical equilibria between mineral surfaces and the metasomatic fluid were approached simultaneously in parts of the skarn several meters or more apart, while isotopic and chemical disequilibria (i.e. zoning) have been preserved between 20 to 40 ??m-thick zones in grandite garnet. More Fe-, or andradite-rich garnet crystallized in more H2O-rich C-O-H fluids ( {Mathematical expression} ??? 0.01) than present with grossularite-rich garnet ( {Mathematical expression}??? 0.035). Stage II was marked by the replacement of garnet and pyroxene by quartz, amphibole, plagioclase, epidote, magnetite, and calcite. Many of the replacement reactions took place over a relatively narrow range in temperature (480-550 ?? C), as indicated by 18O fractionations between quartz and amphibole. Meteoric water comprised 20 to 50% of the metasomatic fluid during Stage II. Calcite was formed along with pyrite, minor pyrrhotite, and chalcopyrite during Stage III, although the crystallization of pyrite and calcite had begun earlier, during Stages I and II, respectively. Carbon and sulfur isotope compositions of calcite and pyrite indicate a magmatic source for most of the C and S in the metasomatic fluids of Stage III. By the end of Stage III, meteoric water constituted as much as 100% of the metasomatic fluid. Minerals from grandiorite and skarn do not show large depletions in 18O because the oxygen isotope composition of the metasomatic fluid was buffered by the calcareous wall rocks and the grandiorite. Meteoric water in the vicinity of the Osgood Mountains during the Late Crectaceous (??18Ocale. ??? -14.0, ??D = - 107) was slightly enriched in 18O and D relative to present-day meteoric water (??18O = 15.9, ??D = - 117) ?? 1977 Springer-Verlag.

Contributions to Mineralogy and Petrology↗

Wildfire may increase habitat quality for spring Chinook salmon in the Wenatchee River subbasin, WA, USA

Pacific Northwest salmonids are adapted to natural disturbance regimes that create dynamic habitat patterns over space and through time. However, human land use, particularly long-term fire suppression, has altered the intensity and frequency of wildfire in forested upland and riparian areas. To examine the potential impacts of wildfire on aquatic systems, we developed stream-reach-scale models of freshwater habitat for three life stages (adult, egg/fry, and juvenile) of spring Chinook salmon ( Oncorhynchus tshawytscha ) in the Wenatchee River subbasin, Washington. We used variables representing pre- and post-fire habitat conditions and employed novel techniques to capture changes in in-stream fine sediment, wood, and water temperature. Watershed-scale comparisons of high-quality habitat for each life stage of spring Chinook salmon habitat suggested that there are smaller quantities of high-quality juvenile overwinter habitat as compared to habitat for other life stages. We found that wildfire has the potential to increase quality of adult and overwintering juvenile habitat through increased delivery of wood, while decreasing the quality of egg and fry habitat due to the introduction of fine sediments. Model results showed the largest effect of fire on habitat quality associated with the juvenile life stage, resulting in increases in high-quality habitat in all watersheds. Due to the limited availability of pre-fire high-quality juvenile habitat, and increased habitat quality for this life stage post-fire, occurrence of characteristic wildfires would likely create a positive effect on spring Chinook salmon habitat in the Wenatchee River subbasin. We also compared pre- and post-fire model results of freshwater habitat for each life stage, and for the geometric mean of habitat quality across all life stages, using current compared to the historic distribution of spring Chinook salmon. We found that spring Chinook salmon are currently distributed in stream channels in which in-stream habitat for most life stages has a consistently positive response to fire. This compares to the historic distribution of spring Chinook, in which in-stream habitat exhibited a variable response to fire, including decreases in habitat quality overall or for specific life stages. This suggests that as the distribution of spring Chinook has decreased, they now occupy those areas with the most positive potential response to fire. Our work shows the potentially positive link between wildfire and aquatic habitat that supports forest managers in setting broader goals for fire management, perhaps leading to less fire suppression in some situations.

Washington↗

Biochemical composition of three algal species proposed as food for captive freshwater mussels

To identify potential diets for rearing captive freshwater mussels, the protein, carbohydrate (CHO), and lipid contents of two green algae, Neochloris oleoabundans, Bracteacoccus grandis, and one diatom, Phaeodactylum tricornutum, were compared at different growth stages. The fatty acid and sterol composition were also identified. Protein was greatest (55-70%) for all species at late log growth stage (LL), and declined in late stationary (LS) growth. CHO was greatest at LS stage for all species (33.9-56.4% dry wt). No significant change in lipid levels occurred with growth stage, but tended to increase in N. oleoabundans. Mean lipid content differed significantly in the order: N. oleoabundans > P. tricornutum > B. grandis. Total fatty acids (TFA) were higher at LS stage compared to other stages in the two green algae, and stationary stage in the diatom. Mean unsaturated fatty acids (UFA) as %TFA was significantly higher in N. oleoabundans than the other species. The green algae contained high percentages of C-18 polyunsaturated fatty acids (PUFAs), while the diatom was abundant in C-16 saturated and mono-unsaturated fatty acids and C-20 PUFA fatty acids. Growth stage had no effect on sterol concentration of any species. B. grandis showed significantly higher sterol levels than the other species except P. tricornutum at S stage. B. grandis was characterized by predominantly ??5, C-29 sterols, while N. oleoabundans synthesized ??5,7, ??5,7,22, and ??7, C-28 sterols. P. tricornutum produced primarily a ??5,22, C-28 sterol, and a small amount of a ??7,22, C-28 sterol.

Journal of Applied Phycology↗

The communication of volcano information in New Zealand - A narrative review

Communication of volcano information is critical for effective volcanic risk management. A variety of information is communicated to inform decisions and guide actions for planning, preparedness, and response. Such information needs to be reliable, and fit-for-purpose across different stages of volcanic activity (quiescence, unrest, short or long-term eruptive stages, and the post-eruptive stage). However, an understanding of communication across these different stages of volcanic activity remains limited. We undertook a narrative review of New Zealand literature to explore what information is communicated about volcanoes, across which stages of activity and by whom. Results highlight that NZ literature only documents certain aspects of volcano information and communication, specifically regarding certain locations, stages of volcanic activity (i.e. quiescence or unrest), or hazards. Literature gaps exist regarding volcano communication during unrest and post-eruptive stages, as well as how volcano information evolves between these phases, and how decision-makers use such information. Additional work would be useful to document existing examples of volcano information for different stages of activity. Further research could help in understanding the information needs of decision-makers during each of these stages to improve information and communication.

New Zealand Journal of Geology and Geophysics↗

Discharge of sediment in channelized alluvial streams

Approximately 400 million cubic feet of channel sediments have been delivered to the Mississippi River from the Obion-Forked Deer River system in the last 20 years. The discharge of sediment from these channelized networks in West Tennessee varies systematically with the stage of channel evolution. Maximum bed-material discharges occur during the initial phases of degradation (Stage III). In contrast, yields of suspended-sediment peak during the threshold stage (Stage IV: large-scale mass wasting) as sediments are delivered from main-channel banks and tributary beds. Suspended-sediment yields then decrease as aggradation (Stage V) becomes the dominant trend in the main channels, but remains relatively high through restabilization (Stage VI) because of continued degradation and widening in the tributaries. Bed-material discharges decrease from the degradation stage (III) to Stage V, and increase again during restabilization (Stage VI) because secondary aggradation increases gradients and incipient meandering serves to rework bed sediments. Additional aspects of the subject are discussed.

Water Resources Bulletin↗

Structural and petrologic evolution of the Lihue basin and eastern Kauai, Hawaii

The topography of the eastern part of the Hawaiian island of Kauai is dominated by the Lihue basin, a large (∼110 km 2 ) semicircular depression bounded by steep cliffs and partly filled by late rejuvenated-stage (or posterosional stage) volcanic material. As with other large, semicircular basins on ocean-island volcanoes, the subsurface geology and origin (e.g., structural collapse vs. fluvial erosion) of the Lihue basin are poorly understood. New analyses of samples collected from eastern Kauai and drill holes within the basin document several important features of the late-stage geologic evolution of Kauai. First, thick (>300 m) sequences of rejuvenated-stage Koloa Volcanics in the Lihue basin show systematic, basin-wide geochemical trends of increasingly incompatible elements with time, indicating a gradual decrease in the extent of partial melting of mantle sources with time. Second, beneath the rejuvenated-stage volcanics in the basin, a thin layer of postshield alkalic stage lavas (e.g., hawaiites and mugearites) overlies older shield-stage tholeiitic lavas of the Napali Member, indicating that the Lihue basin formed by structural collapse, not fluvial erosion. Third, a large (∼2–5 km 3 ) matrix-supported breccia, interpreted as deposits of one or more debris flows, is within the rejuvenated-stage volcanics throughout the basin, and correlates with surficial exposures of the Palikea Breccia west of the basin. Isotopic compositions of the bulk breccia are similar to those of tholeiites from the east side of Kauai, and distinct from those of west Kauai tholeiites. Clasts within the breccia are dominantly hawaiite and alkali gabbro. The source region of the breccia in the steep cliffs and highlands of the central massif to the west of the basin must contain magmatic products of an extensive postshield alkalic stage, including hawaiite flows and one or more large intrusive bodies or ponded sequences of alkali gabbro.

Hawaii↗