SEARCH · Search USGS

Results for “Sedimentary Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

USGS1978

Geologic map of the Mare Australe area of Mars

The south polar region of Mars is among the most geologically diverse on the planet. The areas is within the heavily cratered hemisphere of Mars bu t is distinguished by a variety of younger, regionally extensive deposits and a n a ssemblage of unique erosional forms. The spectrum of units varies from the oldest to the youngest on the planet. The oldest unit, typif ying t h e cratered hemisphere, is the material of ancient large craters, most of which have undergone advanced degradation. These ancient crater materials are overlain by a variety of regional deposits, including extensive intercrater debris blankets, r i dged volcanic flows, and massive eolian deposits that eroded to form complex cliff-rimmed pits. In the central zone of the polar region, south of roughly 75 ˚ S., these depositional units are, in turn, unconformably overlain by a t remendous sedimentary complex 1,500-2,000 km in diameter, consisting of 40 or more regularly spaced horizontal starta . Each stratum retains apparently uniform thickness (several tons of meters) over hundreds of kilometers; erosional unconformities between starta have not as yet been identified. Resting on the uppermost surface of this layered terrain is the perm anent residual polar ice cap. This complex stratigraphic record may ultimately hold the keys t o the initial atmospheric evolution, climatological fluctuations, and the history, budget, and mobility of wate r on the planet.

IMAP↗

USGS2014

Hydrogeology and water quality of the stratified-drift aquifer in the Pony Hollow Creek Valley, Tompkins County, New York

The lithology, areal extent, and the water-table configuration in stratified-drift aquifers in the northern part of the Pony Hollow Creek valley in the Town of Newfield, New York, were mapped as part of an ongoing aquifer mapping program in Tompkins County. Surficial geologic and soil maps, well and test-boring records, light detection and ranging (lidar) data, water-level measurements, and passive-seismic surveys were used to map the aquifer geometry, construct geologic sections, and determine the depth to bedrock at selected locations throughout the valley. Additionally, water-quality samples were collected from selected streams and wells to characterize the quality of surface and groundwater in the study area. Sedimentary bedrock underlies the study area and is overlain by unstratified drift (till), stratified drift (glaciolacustrine and glaciofluvial deposits), and recent post glacial alluvium. The major type of unconsolidated, water-yielding material in the study area is stratified drift, which consists of glaciofluvial sand and gravel, and is present in sufficient amounts in most places to form an extensive unconfined aquifer throughout the study area, which is the source of water for most residents, farms, and businesses in the valleys. A map of the water table in the unconfined aquifer was constructed by using (1) measurements made between the mid-1960s through 2010, (2) control on the altitudes of perennial streams at 10-foot contour intervals from lidar data collected by Tompkins County, and (3) water surfaces of ponds and wetlands that are hydraulically connected to the unconfined aquifer. Water-table contours indicate that the direction of groundwater flow within the stratified-drift aquifer is predominantly from the valley walls toward the streams and ponds in the central part of the valley where groundwater then flows southwestward (down valley) toward the confluence with the Cayuta Creek valley. Locally, the direction of groundwater flow is radially away from groundwater mounds that have formed beneath upland tributaries that lose water where they flow on alluvial fans on the margins of the valley. In some places, groundwater that would normally flow toward streams is intercepted by pumping wells. Surface-water samples were collected in 2001 at four sites including Carter, Pony Hollow (two sites), and Chafee Creeks, and from six wells throughout the aquifer. Calcium dominates the cation composition and bicarbonate dominates the anion composition in groundwater and surface-water samples and none of the common inorganic constituents collected exceeded any Federal or State water-quality standards. Groundwater samples were collected from six wells all completed in the unconfined sand and gravel aquifer. Concentrations of calcium and magnesium dominated the ionic composition of the groundwater in all wells sampled. Nitrate, orthophosphate, and trace metals were detected in all groundwater samples, but none were more than U.S. Environmental Protection Agency or New York State Department of Health regulatory limits.

New York↗

USGS1987

15N/14N variations in Cretaceous Atlantic sedimentary sequences: Implication for past changes in marine nitrogen biogeochemistry

At two locations in the Atlantic Ocean (DSDP Sites 367 and 530) early to middle Cretaceous organic-carbon-rich beds (“black shales”) were found to have significantly lower δ 15 N values (lower 15 N/ 14 N ratios) than adjacent organic-carbon-poor beds (white limestones or green claystones). While these lithologies are of marine origin, the black strata in particular have ° 15 N values that are significantly lower than those previously found in the marine sediment record and most contemporary marine nitrogen pools. In contrast, black, organic-carbon-rich beds at a third site (DSDP Site 603) contain predominantly terrestrial organic matter and have C- and N-isotopic compositions similar to organic matter of modern terrestrial origin. The recurring 15 N depletion in the marine-derived Cretaceous sequences prove that the nitrogen they contain is the end result of an episodic and atypical biogeochemistry. Existing isotopic and other data indicate that the low 15 N relative abundance is the consequence of pelagic rather than post-depositional processes. Reduced ocean circulation, increased denitrification, and, hence, reduced euphotic zone nitrate availability may have led to Cretaceous phytoplankton assemblages that were periodically dominated by N 2 -fixing blue-green algae, a possible source of this sediment 15 N-depletion. Lack of parallel isotopic shifts in Cretaceous terrestrially-derived nitrogen (Site 603) argues that the above change in nitrogen cycling during this period did not extend beyond the marine environment.

Earth and Planetary Science Letters↗

USGS1993

Exhumation of eclogitized continental basement during Variscan lithospheric delamination and gravitational collapse, Sudety Mountains, Poland

A Variscan,deep-crustal-level (eclogite-facies),continental basement massif in western Poland, the Snieznik complex, was tectonically exhumed. Crustal-penetrating mylonite zones record three main kinematic events: early top-to-the-north-directed thrusting, right-slip transpression-tension, and late top-to-the-south and -east normal faulting. Thrusting resulted in extreme crustal thickening and associated eclogite-facies metamorphism. Right-slip movements produced retrogressive crystal-plastic simple-shear zones. Normal faults flank Carboniferous to Early Permian terrigenous sedimentary basins, documenting tectonic and erosional denudation of the Snieznik complex during lithospheric extension. Sm/Nd isotopic dates previously reported for the in situ eclogite-facies metamorphic mineral assemblages are 341, 337, and 329 Ma (Brueckner et al., 1991). 40 Ar/ 39 Ar isotopic dates for metamorphic hornblende (338, 333, and 332 Ma), muscovite (329 and 329 Ma), and biotite (328 Ma) reflect times of cooling through the ∼500, 350, and 300 °C isotherms, respectively. These nearly concordant mineral dates document rapid cooling from ∼850 °C (eclogue-facies temperatures) to ∼300 °C. Rapid denudation of these deep-crustal rocks (∼19-22 kbar pressures, >70 km depth) is attributed to processes, similar to those of metamorphic-core complexes, that operated during lithospheric delamination and gravitational collapse. The sequence of late Paleozoic (Alleghanian) crustal thickening followed by right-slip transpression-tension followed by normal faulting recognized in the U.S. Appalachians implies that this tectonic pattern may exist throughout the Afleghanian-Variscan belt.

Sudety Mountains↗

USGS1999

Preliminary aeromagnetic anomaly map of California

The magnetization in crustal rocks is the vector sum of induced in minerals by the Earth’s present main field and the remanent magnetization of minerals susceptible to magnetization (chiefly magnetite) (Blakely, 1995). The direction of remanent magnetization acquired during the rock’s history can be highly variable. Crystalline rocks generally contain sufficient magnetic minerals to cause variations in the Earth’s magnetic field that can be mapped by aeromagnetic surveys. Sedimentary rocks are generally weakly magnetized and consequently have a small effect on the magnetic field: thus a magnetic anomaly map can be used to “see through” the sedimentary rock cover and can convey information on lithologic contrasts and structural trends related to the underlying crystalline basement (see Nettleton,1971; Blakely, 1995). The magnetic anomaly map (fig. 2) provides a synoptic view of major anomalies and contributes to our understanding of the tectonic development of California. Reference fields, that approximate the Earth’s main (core) field, have been subtracted from the recorded magnetic data. The resulting map of the total magnetic anomalies exhibits anomaly patterns related to the distribution of magnetized crustal rocks at depths shallower than the Curie point isotherm (the surface within the Earth beneath which temperatures are so high that rocks lose their magnetic properties). The magnetic anomaly map has been compiled from existing digital data. Data obtained from aeromagnetic surveys that were made at different times, spacings and elevations, were merged by analytical continuation of each set onto a common surface 305 m (1000 ft) above terrain. Digital data in this compatible form allows application of analytical techniques (Blakley, 1995) that can be used to enhance anomaly characteristics (e.g., wavelength and trends) and provide new interpretive information.

California↗

USGS1999

Diagenesis of lower Cretaceous pelagic carbonates, North Atlantic: Paleoceanographic signals obscured

The stable isotope and minor element geochemistry of Neocomian (Lower Cretaceous) pelagic carbonates of the North Atlantic Basin (Deep Sea Drilling Project Sites 105, 367, 387, 391, and 603) was examined to develop a diagenetic model for pelagic limestones. In particular, we hoped to test the fidelity of whole-rock geochemical records as paleoceanographic indicators for pelagic deposits of pre-Aptian age, in which individual microfossils are not available for analysis. Data indicate that in addition to depth of burial, rhythmic variations in primary carbonate content have strongly controlled diagenetic patterns and associated geochemical signatures in these Neocomian sequences. Samples become increasingly depleted in Sr and 18O with increasing CaCO3 content. Within individual sedimentary sections, substantial decreases in Sr/Ca ratios and ??18O values are evident over a range of 4 to 98% CaCO3. However, even over a relatively narrow range of 50 to 98% CaCO3 a 2.5%c variation in ??18O values and a change of a factor of 1.7 in Sr/Ca ratios are observed. Carbon isotope compositions do not vary as extensively with CaCO3 content, but carbonate-rich intervals tend to be relatively depleted in 13C. Petrographic analysis reveals that these geochemical patterns are related to the transfer of CaCO3 from carbonate-poor intervals (calcareous shales and marlstones) to adjacent carbonate-rich intervals (limestones) during burial compaction and pressure solution. This process results in the addition of diagenetic cement to carbonate-rich intervals to produce a bulk composition that is relatively depleted in Sr and 18O and, at the same time, enables the retention of more-or-less primary carbonate that is relatively enriched in Sr and 18O in adjacent carbonate-poor intervals. Thus, although cyclic variations in CaCO3 content are primary in the Neocomian sequences examined, measured variations in Sr/Ca ratios and ??18O values are not and, as such, do not provide reliable proxies for past variations in climate, oceanographic conditions, or global ice volume.

Journal of Foraminiferal Research↗

USGS1992

Rare earth, major and trace element composition of Leg 127 sediments

The relative effects of paleoceanographic and paleogeographic variations, sediment lithology, and diagenetic processes on the final preserved chemistry of Japan Sea sediments are evaluated by investigating the rare earth element (REE), major element, and trace element concentrations in 59 squeeze-cake whole-round and 27 physical-property sample residues from Sites 794, 795, and 797, cored during ODP Leg 127. The most important variation in sedimentary chemical composition is the increase in SiO2 concentration through the Pliocene diatomaceous sequences, which dilutes most other major and trace element components by various degrees. This biogenic input is largest at Site 794 (Yamato Basin), moderately developed at Site 797 (Yamato Basin), and of only minor importance at Site 795 (Japan Basin), potentially reflecting basinal contrasts in productivity with the Yamato Basin recording greater biogenic input than the Japan Basin and with the easternmost sequence of Site 794 lying beneath the most productive waters. There are few systematic changes in solid-phase chemistry resulting from the opal-A/opal-CT or opal-CT/quartz silica phase transformations. Most major and trace element concentrations are controlled by the aluminosilicate fraction of the sediment, although the effects of diagenetic silica phases and manganese carbonates are of localized importance. REE total abundances (IREE) in the Japan Sea are strongly dependent upon the paleoceanographic position of a given site with respect to terrigenous and biogenic sources. REE concentrations at Site 794 overall correspond well to aluminosilicate chemical indices and are strongly diluted by SiO2 within the upper Miocene-Pliocene diatomaceous sequence. Eu/Eu* values at Site 794 reach a maximum through the diatomaceous interval as well, most likely suggesting an association of Eu/Eu* with the siliceous component, or reflecting slight incorporation of a detrital feldspar phase. XREE at Site 795 also is affiliated strongly with aluminosilicate phases and yet is diluted only slightly by siliceous input. At Site 797, ΣRE E is not as clearly associated with the aluminosilicate fraction, is correlated moderately to siliceous input, and may be sporadically influenced by detrital heavy minerals originating from the nearby rifted continental fragment composing the Yamato Rise. Ce/Ce* profiles at all three sites increase essentially monotonically with depth and record progressive diagenetic LREE fractionation. The observed Ce/Ce* increases are not responding to changes in the paleoceanographic oxygenation state of the overlying water, as there is no independent evidence to suggest the proper Oceanographic conditions. Ce/Ce* correlates slightly better with depth than with age at the two Yamato Basin sites. The downhole increase in Ce/Ce* at Sites 794 and 797 is a passive response to the diagenetic transfer of LREE (except Ce) from sediment to interstitial water. At Site 795, the overall lack of correlation between Ce/Ce* and La/Y^ suggests that other processes mask the diagenetic behavior of all LREEs. First-order calculations of the Ce budget in Japan Sea waters and sediment indicate that ~20% of the excess Ce adsorbed by settling particles is recycled within the water column and that an additional -38% is recycled at or near the seafloor. Thus, because the remaining excess Ce is only -10% of the total Ce, there is not a large source of Ce to the deeply buried sediment, further suggesting that the downhole increase in Ce/Ce* is a passive response to diagenetic behavior of the other LREEs. The REE chemistry of Japan Sea sediment therefore predicts successive downhole addition of LREEs to deeply buried interstitial waters.

Conference Paper↗

USGS1992

The Midcontinent rift in the Lake Superior region with emphasis on its geodynamic evolution

The Midcontinent rift is a Middle Proterozoic continental rift which records about 15 m.y. of extension, subsidence, and voluminous volcanism in the period 1109–1094 Ma in the central part of North America. During that time the crust was nearly totally separated and as much as 25 km of subaerial basalts accumulated in a deep central depression. Following extension and volcanism, a longer period of subsidence resulted in development of a post-rift sedimentary basin in which as much a 8 km of fluvial and lacustrine clastic rocks were deposited. Partial inversion of the central depression occurred about 30–50 m.y. after extension to produce the current configuration of a central horst, composed mostly of thick volcanic accumulations, between shallower flanking basins.

Lake Superior↗

USGS2006

Site response and attenuation in the Puget Lowland, Washington State

Simple spectral ratio (SSR) and horizontal-to-vertical (HN) site-response estimates at 47 sites in the Puget Lowland of Washington State document significant attenuation of 1.5- to 20-Hz shear waves within sedimentary basins there. Amplitudes of the horizontal components of shear-wave arrivals from three local earthquakes were used to compute SSRs with respect to the average of two bedrock sites and H/V spectral ratios with respect to the vertical component of the shear-wave arrivals at each site. SSR site-response curves at thick basin sites show peak amplifications of 2 to 6 at frequencies of 3 to 6 Hz, and decreasing spectra amplification with increasing frequency above 6 Hz. SSRs at nonbasin sites show a variety of shapes and larger resonance peaks. We attribute the spectral decay at frequencies above the amplification peak at basin sites to attenuation within the basin strata. Computing the frequency-independent, depth-dependent attenuation factor (Qs,int) from the SSR spectral decay between 2 and 20 Hz gives values of 5 to 40 for shallow sedimentary deposits and about 250 for the deepest sedimentary strata (7 km depth). H/V site responses show less spectral decay than the SSR responses but contain many of the same resonance peaks. We hypothesize that the H/V method yields a flatter response across the frequency spectrum than SSRs because the H/V reference signal (vertical component of the shear-wave arrivals) has undergone a degree of attenuation similar to the horizontal component recordings. Correcting the SSR site responses for attenuation within the basins by removing the spectral decay improves agreement between SSR and H/V estimates.

Bulletin of the Seismological Society of America↗

USGS1983

Continuous seismic-reflection survey defining shallow sedimentary layers in the Charlotte Harbor and Venice areas, southwest Florida

A continuous marine seismic-reflection survey system was used to define the configuration of shallow sedimentary layers underlying the Charlotte Harbor and Venice areas, southwest Florida. Seismic profiling was conducted over a distance of about 57 miles of Charlotte Harbor, the Peace and Myakka Rivers, and the Intracoastal Waterway near Venice using a high resolution energy source capable of penetrating 200 feet of sediments with a resolution of 1 to 3 feet. Five stratigraphic units defined from the seismic records includes sediments to Holocene to early Miocene age. All seismic-profile records are presented, along with geologic sections constructed from the records. Seismic reflection amplitude, frequency, continuity, configuration, external form, and areal association were utilized to interpret facies and depositional environments of the stratigraphic units. The despositional framework of the units ranges from shallow shelf to prograded slope. The stratigraphic units are correlated with the surficial aquifer and intermediate artesian aquifers, and permeable zones of the aquifers are related to the seismic records. (USGS)

Florida↗

USGS2014

Seismic structure of the central US crust and upper mantle: Uniqueness of the Reelfoot Rift

Using seismic surface waves recorded with Earthscope's Transportable Array, we apply surface wave imaging to determine 3D seismic velocity in the crust and uppermost mantle. Our images span several Proterozoic and early Cambrian rift zones (Mid-Continent Rift, Rough Creek Graben—Rome trough, Birmingham trough, Southern Oklahoma Aulacogen, and Reelfoot Rift). While ancient rifts are generally associated with low crustal velocity because of the presence of thick sedimentary sequences, the Reelfoot Rift is unique in its association with low mantle seismic velocity. Its mantle low-velocity zone (LVZ) is exceptionally pronounced and extends down to at least 200 km depth. This LVZ is of variable width, being relatively narrow ( ∼ 50 km "> ∼50km wide) within the northern Reelfoot Rift, which hosts the New Madrid Seismic Zone (NMSZ). We hypothesize that this mantle volume is weaker than its surroundings and that the Reelfoot Rift consequently has relatively low elastic plate thickness, which would tend to concentrate tectonic stress within this zone. No other intraplate ancient rift zone is known to be associated with such a deep mantle low-velocity anomaly, which suggests that the NMSZ is more susceptible to external stress perturbations than other ancient rift zones.

Reelfoot Rift↗

USGS2003

Geologic map of the Big Delta B-2 quadrangle, east-central Alaska

New 1:63,360-scale geologic mapping of the Big Delta B-2 quadrangle provides important data on the structural setting and age of geologic units, as well as on the timing of gold mineralization plutonism within the Yukon-Tanana Upland of east-central Alaska. Gold exploration has remained active throughout the region in response to the discovery of the Pogo gold deposit, which lies within the northwestern part of the quadrangle near the south bank of the Goodpaster River. Geologic mapping and associated geochronological and geochemical studies by the U.S. Geological Survey (USGS) and the Alaska Department of Natural Resources, Division of Mining and Water Management, provide baseline data to help understand the regional geologic framework. Teck Cominco Limited geologists have provided the geologic mapping for the area that overlies the Pogo gold deposit as well as logistical support, which has lead to a much improved and informative product. The Yukon-Tanana Upland lies within the Tintina province in Alaska and consists of Paleozoic and possibly older(?) supracrustal rocks intruded by Paleozoic (Devonian to Mississippian) and Cretaceous plutons. The oldest rocks in the Big Delta B-2 quadrangle are Paleozoic gneisses of both plutonic and sedimentary origin. Paleozoic deformation, potentially associated with plutonism, was obscured by intense Mesozoic deformation and metamorphism. At least some of the rocks in the quadrangle underwent tectonism during the Middle Jurassic (about 188 Ma), and were subsequently deformed in an Early Cretaceous contractional event between about 130 and 116 Ma. New U-Pb SHRIMP data presented here on zircons from the Paleozoic biotite gneisses record inherited cores that range from 363 Ma to about 2,130 Ma and have rims of euhedral Early Cretaceous metamorphic overgrowths (116 +/- 4 Ma), interpreted to record recrystallization during Cretaceous west-northwest-directed thrusting and folding. U-Pb SHRIMP dating of monazite from a Paleozoic gneiss sample yields an age of 112 +/- 2 Ma; the monazite presumably grew during the waning stages of the intense regional Cretaceous ductile deformation. The Cretaceous ductile deformation was followed closely by granite plutonism and gold mineralization. The main pulse of gold mineralization is temporally and spatially associated with the Cretaceous granitic dikes and plutons and occurred during regional uplift and extension.

IMAP↗

USGS1990

Long-term effects of surface coal mining on ground-water levels and quality in two small watersheds in eastern Ohio

Two small watersheds in eastern Ohio that were surface mined for coal and reclaimed were studied during 1986-89. Water-level and water-quality data were compared with similar data collected during previous investigations conducted during 1976-83 to determine long-term effects of surface mining on the hydrologic system. Before mining, the watersheds were characterized by sequences of flat-lying sedimentary rocks containing two major coal seams and underclays. An aquifer was present above each of the underclays. Surface mining removed the upper aquifer, stripped the coal seam, and replaced the sediment. This created a new upper aquifer with different hydraulic and chemical characteristics. Mining did not disturb the middle aquifer. A third, deeper aquifer in each watershed was not studied. Water levels were continuously recorded in one well in each aquifer. Other wells were measured every 2 months. Water levels in the upper aquifers reached hydraulic equilibrium from 2 to 5 years after mining ceased. Water levels in the middle aquifers increased more than 5 feet during mining and reached equilibrium almost immediately thereafter. Water samples were collected from three upper-aquifer well, a seep from the upper aquifer, and the stream in each watershed. Two samples were collected in 1986 and 1987, and one each in 1988 and 1989. In both watersheds, sulfate replaced bicarbonate as the dominant upper-aquifer and surface-water anion after mining. For the upper aquifer of a watershed located in Muskingum County, water-quality data were grouped into premining and late postmining time periods (1986-89). The premining median pH and concentration of dissolved solids and sulfate were 7.6, 378 mg/L (milligrams per liter), and 41 mg/L, respectively. The premining median concentrations of iron and manganese were 10 μg/L (micrograms per liter) and 25 μg/L, respectively. The postmining median values of pH, dissolved solids, and sulfate were 6.7, 1,150 mg/L, and 560 mg/L, respectively. The postmining median concentrations of iron and manganese were 3,900 μg/L and 1,900 μg/L, respectively. For the upper aquifer of a watershed located in Jefferson County, the water-quality data were grouped into three time periods of premining, early postmining, and late postmining. The premining median pH and concentrations of dissolved solids and sulfate were 7.0, 335 mg/L, and 85 mg/L, respectively. The premining median concentrations of iron and manganese were 30 μg/L for each constituent. Late postmining median pH and concentrations of dissolved solids and sulfate were 6.7, 1,495 mg/L, and 825 mg/L, respectively. The postmining median concentrations of iron and manganese were 31 μg/L and 1,015 μg/L, respectively. Chemistry of water in the middle aquifer in each watershed underwent similar changes. In general, statistically significant increases in concentrations of dissolved constituents occurred because of surface mining. In some constituents, concentrations increased by more than an order of magnitude. The continued decrease in pH indicated that ground water had no reached geochemical equilibrium in either watershed more than 8 years after mining.

Ohio↗

USGS2015

Geomorphology, active tectonics, and landscape evolution in the Mid-Atlantic region

In 2014, the geomorphology community marked the 125th birthday of one of its most influential papers, “The Rivers and Valleys of Pennsylvania” by William Morris Davis. Inspired by Davis’s work, the Appalachian landscape rapidly became fertile ground for the development and testing of several grand landscape evolution paradigms, culminating with John Hack’s dynamic equilibrium in 1960. As part of the 2015 GSA Annual Meeting, the Geomorphology, Active Tectonics, and Landscape Evolution field trip offers an excellent venue for exploring Appalachian geomorphology through the lens of the Appalachian landscape, leveraging exciting research by a new generation of process-oriented geomorphologists and geologic field mapping. Important geomorphologic scholarship has recently used the Appalachian landscape as the testing ground for ideas on long- and short-term erosion, dynamic topography, glacial-isostatic adjustments, active tectonics in an intraplate setting, river incision, periglacial processes, and soil-saprolite formation. This field trip explores a geologic and geomorphic transect of the mid-Atlantic margin, starting in the Blue Ridge of Virginia and proceeding to the east across the Piedmont to the Coastal Plain. The emphasis here will not only be on the geomorphology, but also the underlying geology that establishes the template and foundation upon which surface processes have etched out the familiar Appalachian landscape. The first day focuses on new and published work that highlights Cenozoic sedimentary deposits, soils, paleosols, and geomorphic markers (terraces and knickpoints) that are being used to reconstruct a late Cenozoic history of erosion, deposition, climate change, and active tectonics. The second day is similarly devoted to new and published work documenting the fluvial geomorphic response to active tectonics in the Central Virginia seismic zone (CVSZ), site of the 2011 M 5.8 Mineral earthquake and the integrated record of Appalachian erosion preserved on the Coastal Plain. The trip concludes on Day 3, joining the Kirk Bryan Field Trip at Great Falls, Virginia/ Maryland, to explore and discuss the dramatic processes of base-level fall, fluvial incision, and knickpoint retreat.

Virginia↗

USGS1989

Glacimarine sedimentary processes, facies and morphology of the south-southeast Alaska shelf and fjords

High precipitation from Gulf of Alaska air masses can locally reach up to 800 cm a −1 . This precipitation on tectonically active mountains creates cool-temperate glaciation with extremely active erosion and continuously renewed resources. High basal debris loads up to 1.5 m thick of pure debris and rapid glacial flow, which can be more than 3000 m a −1 , combine to produce large volumes of siliciclastic glacimarine sediment at some of the highest sediment accumulation rates on record. At tidewater fronts of valley glaciers, sediment accumulation rates can be over 13 m a −1 and deltas commonly grow at about 10 6 m 3 a −1 . Major processes influencing glacimarine sedimentation are glacial transport and glacier-contact deposition, meltwater (subaerial and submarine) and runoff transport and deposition, iceberg rafting and gouging, sea-ice transport, wave action and storm reworking, tidal transport and deposition, alongshelf transport, sliding and slumping and gravity flows, eolian transport, and biogenic production and reworking. Processes are similar in both shelf and fjord settings; however, different intensities of some processes create different facies associations and geometries. The tectonoclimatic regime also controls morphology because bedrock structure is modified by glacial action. Major glacimarine depositional systems are all siliciclastic. They are subglacial, marginal-morainal bank and submarine outwash, and proglacial/paraglacial-fluvial/deltaic, beach, tidal flat/estuary, glacial fjord, marine outwash fjord and continental shelf. Future research should include study of long cores with extensive dating and more seismic surveys to evaluate areal and temporal extent of glacial facies and glaciation; time-series oceanographic data, sidescan sonar surveys and submersible dives to evaluate modern processes; biogenic diversity and production to evaluate paleoecological, paleobiogeographic and biofacies analysis; and detailed comparisons of exposed older rock of the Yakataga Formation to evaluate how glacial style has evolved over 6.3 Ma.

Marine Geology↗

USGS1980

Crustal parameters estimated from P-waves of earthquakes recorded at a small array

The P-arrival times of local and regional earthquakes that are outside of a small network of seismometers can be used to interpret crustal parameters beneath the network by employing the time-term technique. Even when the estimate of the refractor velocity is poorly determined, useful estimates of the station time-terms can be made. The method is applied to a 20 km diameter network of eight seismic stations which was operated near Castaic, California, during the winter of 1972-73. The stations were located in sedimentary basins. Beneath the network, the sedimentary rocks of the basins are known to range from 1 to more than 4 km in thickness. Relative time-terms are estimated from P-waves assumed to be propagated by a refractor in the mid-crust, and again from P-waves propagated by a refractor in the upper basement. For the range of velocities reported by others, the two sets of time-terms are very similar. They suggest that both refractors dip to the southwest, and the geology also indicates that the basement dips in this direction. In addition, the P-wave velocity estimated for the refractor of mid-crustal depths, roughly 6.7 km/sec, agrees with values reported by others. Thus, even in this region of complicated geologic structure, the method appears to give realistic results. ?? 1980 Birkha??user Verlag.

Pure and Applied Geophysics PAGEOPH↗

USGS2017

Drilling, construction, geophysical log data, and lithologic log for boreholes USGS 142 and USGS 142A, Idaho National Laboratory, Idaho

Starting in 2014, the U.S. Geological Survey in cooperation with the U.S. Department of Energy, drilled and constructed boreholes USGS 142 and USGS 142A for stratigraphic framework analyses and long-term groundwater monitoring of the eastern Snake River Plain aquifer at the Idaho National Laboratory in southeast Idaho. Borehole USGS 142 initially was cored to collect rock and sediment core, then re-drilled to complete construction as a screened water-level monitoring well. Borehole USGS 142A was drilled and constructed as a monitoring well after construction problems with borehole USGS 142 prevented access to upper 100 feet (ft) of the aquifer. Boreholes USGS 142 and USGS 142A are separated by about 30 ft and have similar geology and hydrologic characteristics. Groundwater was first measured near 530 feet below land surface (ft BLS) at both borehole locations. Water levels measured through piezometers, separated by almost 1,200 ft, in borehole USGS 142 indicate upward hydraulic gradients at this location. Following construction and data collection, screened water-level access lines were placed in boreholes USGS 142 and USGS 142A to allow for recurring water level measurements. Borehole USGS 142 was cored continuously, starting at the first basalt contact (about 4.9 ft BLS) to a depth of 1,880 ft BLS. Excluding surface sediment, recovery of basalt, rhyolite, and sediment core at borehole USGS 142 was approximately 89 percent or 1,666 ft of total core recovered. Based on visual inspection of core and geophysical data, material examined from 4.9 to 1,880 ft BLS in borehole USGS 142 consists of approximately 45 basalt flows, 16 significant sediment and (or) sedimentary rock layers, and rhyolite welded tuff. Rhyolite was encountered at approximately 1,396 ft BLS. Sediment layers comprise a large percentage of the borehole between 739 and 1,396 ft BLS with grain sizes ranging from clay and silt to cobble size. Sedimentary rock layers had calcite cement. Basalt flows ranged in thickness from about 2 to 100 ft and varied from highly fractured to dense, and ranged from massive to diktytaxitic to scoriaceous, in texture. Geophysical logs were collected on completion of drilling at boreholes USGS 142 and USGS 142A. Geophysical logs were examined with available core material to describe basalt, sediment and sedimentary rock layers, and rhyolite. Natural gamma logs were used to confirm sediment layer thickness and location; neutron logs were used to examine basalt flow units and changes in hydrogen content; gamma-gamma density logs were used to describe general changes in rock properties; and temperature logs were used to understand hydraulic gradients for deeper sections of borehole USGS 142. Gyroscopic deviation was measured to record deviation from true vertical at all depths in boreholes USGS 142 and USGS 142A.

Idaho↗

USGS2005

Contrasting Proterozoic basement complexes near the truncated margin of Laurentia, northwestern Sonora–Arizona international border region

We utilize new geological mapping, conventional isotope dilution–thermal ionization mass spectrometry (ID-TIMS) and sensitive high-resolution ion microprobe (SHRIMP) U-Pb zircon analyses, and whole-rock radiogenic isotope characteristics to distinguish two contrasting Proterozoic basement complexes in the international border region southeast of Yuma, Arizona. Strategically located near the truncated southwest margin of Laurentia, these Proterozoic exposures are separated by a northwest-striking Late Cretaceous batholith. Although both complexes contain strongly deformed Paleoproterozoic granitoids (augen gneisses) intruded into fine-grained host rocks, our work demonstrates marked differences in age, host rock composition, and structure between the two areas. The Western Complex reveals a >5-km-thick tilted section of finely banded felsic, intermediate, and mafic orthogneiss interspersed with tabular intrusive bodies of medium-grained leucocratic biotite granite (1696 ± 11 Ma; deepest level), medium-grained hornblende-biotite granodiorite (1722 ± 12 Ma), and coarse-grained porphyritic biotite granite (1725 ± 19 Ma; shallowest level). Penetrative ductile deformation has converted the granites to augen gneisses and caused isoclinal folding and transposition of primary contacts. Exposed in a belt of northwest-trending folds, these rocks preserve southwest-vergent shear fabric annealed during amphibolite facies metamorphism, when crystalloblastic textures developed. Deformation and regional metamorphism occurred before emplacement of 1.1 Ga(?) mafic dikes. Throughout the Eastern Complex, meta-arkose, quartzite, biotite schist, and possible felsic metavolcanic rocks comprise the country rocks of strongly foliated medium- and coarse-grained biotite granite augen gneisses that yield mean 207 Pb/ 206 Pb ages of 1646 ± 10 Ma, 1642 ± 19 Ma, and 1639 ± 15 Ma. Detrital zircons from four samples of host sandstone are isotopically disturbed; nevertheless, the data indicate a restricted provenance (ca. 1665 Ma to 1650 Ma), with two older grains (1697 and 1681 Ma). The pervasively recrystallized Paleoproterozoic map units strike parallel to foliation and are repeated in south-trending folds that are locally refolded about easterly hinges. Southeasterly lineation developed in augen gneiss and host strata becomes penetrative in local domains of L-tectonite. Regional metamorphism associated with this tectonism persisted until ca. 1590 Ma, as recorded by metamorphic growths within some zircon grains. Mesoproterozoic intrusions that crosscut the Paleoproterozoic metasediments and augen gneisses include coarsely porphyritic biotite granite (1432 ± 6 Ma) and diabase dikes (1.1 Ga?). Emplacement of the granite was accompanied by secondary high-U overgrowths, dated at 1433 ± 8 Ma, on some of the Paleoproterozoic detrital zircons, and apparently was also responsible for resetting the whole-rock Pb isotopic systematics (1441 ± 39 Ma) within these Eastern Complex augen gneisses. Younger plutons emplaced into both Proterozoic basement complexes include medium-grained quartz diorite (73.4 ± 3.3 Ma and 72.8 ± 1.7 Ma), Late Cretaceous hornblende-biotite granodiorite, and Paleogene leucocratic biotite granite. Neogene sedimentary and volcanic strata overlie basement along unconformities that are tilted to the northeast, southeast, or southwest. A brittle normal fault, dipping gently northeast, juxtaposes Tertiary andesite with Paleoproterozoic metasandstone. These relationships suggest that the area shares a common history of mid-Tertiary extension with southwestern Arizona. Later influence of the southern San Andreas fault system is implied by multiple dextral offsets of pre-Tertiary units across northwest-trending valleys. Our structural, geochronologic, and isotopic data provide new information to constrain pre–750 Ma Rodinia reconstructions involving southwestern Laurentia. Whole-rock U-Th-Pb and Rb-Sr isotopic systematics in both Paleoproterozoic gneiss complexes are disturbed, however, well-behaved Sm-Nd analyses preserve depleted initial ε Nd values (+2 to +4) that are distinct from the Mojave crustal province, but overlapping with the Yavapai and Mazatzal Provinces of Arizona. The Eastern Complex has the appropriate age and Nd isotopic signature to be part of the Mazatzal Province, but records major tectonism and metamorphism at ca. 1.6 Ga that postdates the Mazatzal orogeny. Deformed granitoids of the Western Complex have “Yavapai-type” ages and ε Nd but display structures discordant to the southwesterly Yavapai trend in central Arizona. The Western Complex lies along-strike with similar-age rocks (1.77 Ga to 1.69 Ga) of the “Caborca block” that have only been studied in detail near Quitovac and south of Caborca. Collectively, these rocks form a northwest-trending strip of basement situated at the truncated edge of Laurentia. The present-day basement geography may reflect an original oroclinal bend in the Yavapai orogenic belt. Alternatively, the western Proterozoic belt of Sonora may represent displaced fragments of basement juxtaposed against the Yavapai-Mazatzal Provinces along a younger sinistral transform fault (e.g., the Late Jurassic Mojave-Sonora megashear or the Permian Coahuila transform). Crustal blocks with these specific petrologic, geochronologic, and isotopic characteristics can be found in south-central and northeastern portions of the Australian Proterozoic basement, further supporting a connection between the two continents prior to breakup of the Rodinian supercontinent.

Arizona, California, Nevada, Sonora↗