Search USGS⌕ Search

SEARCH · Search USGS

Results for “Minerals and the Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources

Fertilizer consumption and energy input for 16 crops in the United States

Fertilizer use by U.S. agriculture has increased over the past few decades. The production and transportation of fertilizers (nitrogen, N; phosphorus, P; potassium, K) are energy intensive. In general, about a third of the total energy input to crop production goes to the production of fertilizers, one-third to mechanization, and one-third to other inputs including labor, transportation, pesticides, and electricity. For some crops, fertilizer is the largest proportion of total energy inputs. Energy required for the production and transportation of fertilizers, as a percentage of total energy input, was determined for 16 crops in the U.S. to be: 19–60% for seven grains, 10–41% for two oilseeds, 25% for potatoes, 12–30% for three vegetables, 2–23% for two fruits, and 3% for dry beans. The harvested-area weighted-average of the fraction of crop fertilizer energy to the total input energy was 28%. The current sources of fertilizers for U.S. agriculture are dependent on imports, availability of natural gas, or limited mineral resources. Given these dependencies plus the high energy costs for fertilizers, an integrated approach for their efficient and sustainable use is needed that will simultaneously maintain or increase crop yields and food quality while decreasing adverse impacts on the environment.

Natural Resources Research↗

Comparative performance of CO 2 measuring methods: marine aquaculture recirculation system application

Many methods are available for the measurement of dissolved carbon dioxide in an aqueous environment. Standard titration is the typical field method for measuring dissolved CO 2 in aquaculture systems. However, titrimetric determination of dissolved CO 2 in marine water aquaculture systems is unsuitable because of the high dissolved solids, silicates, and other dissolved minerals that interfere with the determination. Other methods used to measure dissolved carbon dioxide in an aquaculture water included use of a wetted CO 2 probe analyzer, standard nomographic methods, and calculation by direct measurements of the water's pH, temperature, and alkalinity. The determination of dissolved CO 2 in saltwater based on partial pressure measurements and non-dispersive infra-red (NDIR) techniques with a CO 2 gas analyzer are widely employed for oceanic surveys of surface ocean CO 2 flux and are similar to the techniques employed with the head space unit (HSU) in this study. Dissolved carbon dioxide (DC) determination with the HSU using a infra-red gas analyzer (IRGA) was compared with titrimetric, nomographic, calculated, and probe measurements of CO 2 in freshwater and in saltwater with a salinity ranging from 5.0 to 30 ppt, and a CO 2 range from 8 to 50 mg/L. Differences in CO 2 measurements between duplicate HSUs (0.1–0.2 mg/L) were not statistically significant different. The coefficient of variation for the HSU readings averaged 1.85% which was better than the CO 2 probe (4.09%) and that for the titrimetric method (5.84%). In all low, medium and high salinity level trials HSU precision was good, averaging 3.39%. Differences existed between comparison testing of the CO 2 probe and HSU measurements with the CO 2 probe readings, on average, providing DC estimates that were higher than HSU estimates. Differences between HSU and titration based estimates of DC increased with salinity and reached a maximum at 32.2 ppt. These differences were statistically significant (P < 0.05) at all salinity levels greater than 0.3 ppt. Results indicated reliable replicated results from the head space unit with varying salinity and dissolved carbon dioxide concentrations.

Aquacultural Engineering↗

Negligible cycling of terrestrial carbon in many lakes of the arid circumpolar landscape

High-latitude environments store nearly half of the planet’s below-ground organic carbon (OC), mostly in perennially frozen permafrost soils. Climatic changes drive increased export of terrestrial OC into many aquatic networks, yet the role that circumpolar lakes play in mineralizing this carbon is unclear. Here we directly evaluate ecosystem-scale OC cycling for lakes of interior Alaska. This arid, low-relief lake landscape is representative of over a quarter of total northern circumpolar lake area, but is greatly under-represented in current studies. Contrary to projections based on work in other regions, the studied lakes had a negligible role in mineralizing terrestrial carbon; they received little OC from ancient permafrost soils, and had small net contribution to the watershed carbon balance. Instead, most lakes recycled large quantities of internally derived carbon fixed from atmospheric CO 2 , underscoring their importance as critical sites for material and energy provision to regional food webs. Our findings deviate from the prevailing paradigm that northern lakes are hotspots of terrestrial OC processing. The shallow and hydrologically disconnected nature of lakes in many arid circumpolar landscapes isolates them from terrestrial carbon processing under current climatic conditions.

Nature Geoscience↗

Radionuclide Data and Calculations and Loss-On-Ignition, X-Ray Fluorescence, and ICP-AES Data from Cores in Catchments of the Animas River, Colorado

The U.S. Departments of Agriculture and Interior Abandoned Mine Lands (AML) Initiative is focused on the evaluation of the effect of past mining practices on the water quality and the riparian and aquatic habitats of impacted stream reaches downstream from historical mining districts located primarily on Federal lands. This problem is manifest in the eleven western states (west of longitude 102 degrees) where the majority of hardrock mines that had past production are located on Federal lands. In areas of temperate climate and moderate to heavy precipitation, the effects of rapid chemical and physical weathering of sulfides exposed on mine-waste dumps and acidic drainage from mines have resulted in elevated metal concentrations in the stream water and stream-bed sediment. The result of these mineral weathering processes has an unquantified impact on the quality of the water and the aquatic and riparian habitats that may limit their recreational resource value. One of the confounding factors in these studies is the determination of the component of metals derived from hydrothermally altered but unmined portions of these drainage basins. Several watersheds have been studied to evaluate the effects of acid mine drainage and acid rock drainage on the near-surface environment. The Animas River watershed in southwestern Colorado contains a large number of past-producing metal mines that have affected the watershed. Beginning in October 1996, the U.S. Geological Survey (USGS) began a collaborative study of these effects under the USGS-AML Initiative. In this report, we present the radionuclide and geochemical analytical results of sediment coring during 1997-1999 from two cores from oxbow lakes 0.5 mi. upstream from the 32nd Street Bridge near Durango, Colo., and from three cores from beaver ponds within the Mineral Creek drainage basin near Silverton, Colo.

Data Series↗

The influence of biological soil crusts on mineral uptake by associated vascular plants

Soil surfaces dominated by cyanobacteria and cyanolichens (such as Collema sp.) are widespread in deserts of the world. The influence of these biological soil crusts on the uptake of bioessential elements is reported for the first time for six seed plants of the deserts of Utah. This sample almost doubles the number of species for which the influence of biological soil crusts on mineral uptake of associated vascular plants is known. These new case studies, and others previously published, demonstrate that cyanobacterial or cyanobacteria- Collema crusts significantly alter uptake by plants of many bioessential elements. In studies now available, these crusts always increase the N content of associated seed plants. Uptake of Cu, K, Mg, and Zn is usually (>70% of reported cases) increased in the presence of the biological soil crusts. Soil crusts are generally negatively associated with Fe and P levels in associated seed plant tissue, while plant tissue levels of Ca, Mn, and Na are positively as often as negatively associated with the presence of soil crusts. Increases in bioessential elements in vascular plant tissue from biologically-crusted areas are greatest for short-lived herbs that are rooted primarily within the surface soil, the horizon most influenced by crustal organisms. The mineral content of a deeply rooted shrub ( Coleogyne ramosissima ) was less influenced by co-occurrence of biological soil crusts.

Utah↗

Version 3.0 of EMINERS - Economic Mineral Resource Simulator

Quantitative mineral resource assessment, as developed by the U.S. Geological Survey (USGS), consists of three parts: (1) development of grade and tonnage mineral deposit models; (2) delineation of tracts permissive for each deposit type; and (3) probabilistic estimation of the numbers of undiscovered deposits for each deposit type. The estimate of the number of undiscovered deposits at different levels of probability is the input to the EMINERS (Economic Mineral Resource Simulator) program. EMINERS uses a Monte Carlo statistical process to combine probabilistic estimates of undiscovered mineral deposits with models of mineral deposit grade and tonnage to estimate mineral resources. Version 3.0 of the EMINERS program is available as this USGS Open-File Report 2004-1344. Changes from version 2.0 include updating 87 grade and tonnage models, designing new templates to produce graphs showing cumulative distribution and summary tables, and disabling economic filters. The economic filters were disabled because embedded data for costs of labor and materials, mining techniques, and beneficiation methods are out of date. However, the cost algorithms used in the disabled economic filters are still in the program and available for reference for mining methods and milling techniques. The release notes included with this report give more details on changes in EMINERS over the years. EMINERS is written in C++ and depends upon the Microsoft Visual C++ 6.0 programming environment. The code depends heavily on the use of Microsoft Foundation Classes (MFC) for implementation of the Windows interface. The program works only on Microsoft Windows XP or newer personal computers. It does not work on Macintosh computers. For help in using the program in this report, see the "Quick-Start Guide for Version 3.0 of EMINERS-Economic Mineral Resource Simulator" (W.J. Bawiec and G.T. Spanski, 2012, USGS Open-File Report 2009-1057, linked at right). It demonstrates how to execute EMINERS software using default settings and existing deposit models.

Open-File Report↗

The Eocene-Oligocene sedimentary record in the Chesapeake Bay impact structure: Implications for climate and sea-level changes on the western Atlantic margin

A multidisciplinary investigation of the Eocene-Oligocene transition in the International Continental Scientific Drilling Program (ICDP)-U.S. Geological Survey (USGS) Eyreville core from the Chesapeake Bay impact basin was conducted in order to document environmental changes and sequence stratigraphic setting. Planktonic foraminifera and calcareous nannofossil biostratigraphy indicate that the Eyreville core includes an expanded upper Eocene (Biozones E15 to E16 and NP19/20 to NP21, respectively) and a condensed Oligocene-Miocene (NP24-NN1) sedimentary sequence. The Eocene-Oligocene contact corresponds to a =3-Ma-long hiatus. Eocene- Oligocene sedimentation is dominated by great diversity and varying amounts of detrital and authigenic minerals. Four sedimentary intervals are identified by lithology and mineral content: (1) A 30-m-thick, smectite- and illite-rich interval directly overlies the Exmore Formation, suggesting long-term reworking of impact debris within the Chesapeake Bay impact structure. (2) Subsequently, an increase in kaolinite content suggests erosion from soils developed during late Eocene warm and humid climate in agreement with data derived from other Atlantic sites. However, the kaolinite increase may also be explained by change to a predominant sediment input from outside the Chesapeake Bay impact structure caused by progradation of more proximal facies belts during the highstand systems tract of the late Eocene sequence E10.Spectral analysis based on gamma-ray and magnetic susceptibility logs suggests infl uence of 1.2 Ma low-amplitude oscillation of the obliquity period during the late Eocene. (3) During the latest Eocene (Biozones NP21 and E16), several lithological contacts (clay to clayey silt) occur concomitant with a prominent change in the mineralogical composition with illite as a major component: This lithological change starts close to the Biozone NP19/20-NP21 boundary and may correspond to sequence boundary E10-E11 as observed in other northwest Atlantic margin sections. It could result from a shift to more distal depositional environments and condensed sedimentation during maximum fl ooding, rather than refl ecting a climatic change in the hinterland. The distinct 1% increase of the oxygen isotopes may correspond to the short-term latest Eocene "precursor isotope event." (4) The abrupt increase of sediment grainsize, carbonate content, and abundance of authigenic minerals (glauconite) across the major unconformity that separates Eocene from Oligocene sediments in the Eyreville core refl ects deposition in shallower settings associated with erosion, winnowing, and reworking. Sediments within the central crater were affected by the rapid eustatic sea-level changes associated with the greenhouse-icehouse transition, as well as by an abrupt major uplift event and possibly enhanced current activity on the northwestern Atlantic margin. ?? 2009 The Geological Society of America.

Chesapeake Bay↗

Hydrologic controls on the transport and cycling of carbon and nitrogen in a boreal catchment underlain by continuous permafrost

Boreal ecosystems represent a large carbon (C) reservoir and a substantial source of greenhouse gases. Hydrologic conditions dictate whether C leached from boreal soils is processed in catchments or flushed to less productive environments via the stream. This study quantified hydrologic and biogeochemical C loss from a boreal catchment underlain by frozen silt, where flowpaths may deepen as the active layer thaws over the summer. We hypothesized a decrease in the magnitude of C mineralization over the summer associated with changing flowpaths and decreasing hydrologic connectivity, organic matter lability, and nitrogen (N) availability. Conservative tracers were used to partition C and N loss between catchment export and biogeochemical processing. Coupling tracers with tributary and porewater chemistry indicated C and N cycling in soil flowpaths, with an exponential decrease over the summer. Nitrate was primarily reduced in hillslope flowpaths and the lack of N reaching the stream appeared to limit C mineralization. Stream export accounted for the greatest loss of C, removing 247 and 113 mol hr −1 in the early and late summer, respectively. Reactivity was related to hydrologic connectivity between the soils and stream, which was greatest early in the summer and following a large flood. While a warming climate may increase storage potential in thawed soils, the early‐season flush of labile material and late‐season runoff through mineral flowpaths may maintain high C export rates. Therefore, we highlight physical export as a dominant cause of aqueous C loss from silty catchments as the Arctic continues to thaw.

Journal of Geophysical Research G: Biogeosciences↗

Phase 3 geophysical studies in the Wadi Bidah District, Kingdom of Saudi Arabia

Detailed geophysical measurements have been made in the Rabathan area, Wadi Bidah district, Kingdom of Saudi Arabia, at the site of diamond drill holes RAB-1, -2, and -3; these measurements suggest that the causative source for the anomalous EM (electromagnetic) and SP (self-potential) responses is probably highly conductive zones of Precambrian siliceous-carbonaceous rocks. Although many of the zones are no more than a few meters wide, they commonly contain 50 to 80 percent carbonaceous material and locally abundant pyrite. In places, several thin layers of highly concentrated carbonaceous material interlayered with chert form a multiple conductive zone that is seen in the geophysical data as complex anomaly patterns. In the geologic environment of Wadi Bidah, massive sulfide-bearing zones cannot be distinguished from siliceous-carbonaceous zones on the basis of the EM-SP responses. In North America in similar environments, complex resistivity methods used in experimental research have successfully discriminated between sulfide and carbonaceous conductors. Tests of such methods in the Wadi Bidah district are recommended. Geologic, geochemical, and geophysical data at the Jabal Mohr prospect suggest the possibility of mineralized rocks at depth over a possible strike length of 400 m.

Open-File Report↗

Determination of pre-mining geochemical conditions and paleoecology in the Animas River Watershed, Colorado

Determination of the pre-mining geochemical baseline in bed sediments and the paleoecology in a watershed impacted by historical mining activity is of utmost importance in establishing watershed restoration goals. We have approached this problem in the Animas River watershed using geomorphologic mapping methods to identify old pre-mining sediments. A systematic evaluation of possible sites resulted in collection of a large number of samples of pre-mining sediments, overbank sediments, and fluvial tailings deposits from more than 50 sites throughout the watershed. Chemical analysis of individual stratigraphic layers has resulted in a chemical stratigraphy that can be tied to the historical record through geochronological and dendochronological studies at these sites. Preliminary analysis of geochemical data from more than 500 samples from this study, when coupled with both the historical and geochronological record, clearly show that there has been a major impact by historical mining activities on the geochemical record preserved in these fluvial bed sediments. Historical mining activity has resulted in a substantial increase in metals in the very fine sand to clay sized component of the bed sediment of the upper Animas River, and Cement and Mineral Creeks. Enrichment factors for metals in modern bed sediments, relative to the pre-mining sediments, range from a factor of 2 to 6 for arsenic, 4 to more than 10 for cadmium, 2 to more than 10 for lead, 2 to 5 for silver, and 2 to more than 15 for zinc. However, the pre-mining bed sediment geochemical baseline is high relative to crustal abundance levels of many orerelated metals and the watershed would readily be identified as a highly mineralized area suitable for mineral exploration if it had not been disturbed by historical mining activity. We infer from these data that the water chemistry in the streams was less acidic prior to historical mining activity in the watershed. Paleoentologic evidence does not indicate a healthy aquatic habitat in any of the stream reaches investigated above the confluence of the Animas River with Mineral Creek (fig. 1) prior to the impact of historical mining activity. The absence of paleoentologic remains is interpreted to reflect the poor preservation regime of the bed sediment materials sampled. The fluvial sediments sampled in this study represent higher energy environments than are conducive to the preservation of most aquatic organisms including fish remains. We interpret the sedimentological data to indicate that there has been substantial loss of riparian habitat in the upper Animas River above Howardsville as a result of historical mining activity.

Colorado↗

Cement manufacture and the environment - Part I: Chemistry and technology

Hydraulic (chiefly portland) cement is the binding agent in concrete and mortar and thus a key component of a country's construction sector. Concrete is arguably the most abundant of all manufactured solid materials. Portland cement is made primarily from finely ground clinker, which itself is composed dominantly of hydraulically active calcium silicate minerals formed through high-temperature burning of limestone and other materials in a kiln. This process requires approximately 1.7 tons of raw materials perton of clinker produced and yields about 1 ton of carbon dioxide (CO2) emissions, of which calcination of limestone and the combustion of fuels each contribute about half. The overall level of CO2 output makes the cement industry one of the top two manufacturing industry sources of greenhouse gases; however, in many countries, the cement industry's contribution is a small fraction of that from fossil fuel combustion by power plants and motor vehicles. The nature of clinker and the enormous heat requirements of its manufacture allow the cement industry to consume a wide variety of waste raw materials and fuels, thus providing the opportunity to apply key concepts of industrial ecology, most notably the closing of loops through the use of by-products of other industries (industrial symbiosis). In this article, the chemistry and technology of cement manufacture are summarized. In a forthcoming companion article (part II), some of the environmental challenges and opportunities facing the cement industry are described. Because of the size and scope of the U.S. cement industry, the analysis relies primarily on data and practices from the United States.

Journal of Industrial Ecology↗

Antimony in mine wastes: Geochemistry, mineralogy, microbiology

Antimony (Sb) is a valuable mined commodity, used mostly in fire retardants, and considered a critical element. It is also a potential environment hazard classed as a carcinogen. Antimony is concentrated in tailings and waste rock from Sb mines as well as other locations, such as precious metal deposits, where Sb is present in the ore but not recovered. This review covers the aqueous geochemistry, isotope chemistry, mineralogy, and microbiology of Sb in the context of mine waste. The primary minerals stibnite and sulfosalts may release Sb in surface and groundwaters and result in contamination of soils, plants, and river sediments. In some cases, Sb mobility is limited by its adsorption and incorporation into Fe (oxyhydr)oxides. At higher Sb concentrations, precipitation of Sb secondary hosts such as tripuhyite (FeSbO 4 , relatively insoluble) and brandholzite (Mg[Sb(OH) 6 ] 2 · 6H 2 O, highly soluble) influence Sb concentrations in water associated with mine waste. Although Sb is nonessential to organisms, microorganisms are involved in oxidation, reduction, and methylation processes that can drive biogeochemical transformations. Limited toxicological information about Sb makes it challenging to establish regulations or guidelines limiting the concentration of Sb. Antimony is frequently associated with arsenic in mine waste, and remediation design is often based on the assumption that both metalloids behave in a similar way. However, new research suggests that in some environments, this is not the case, and Sb should be considered based on its unique biogeochemical behavior.

Economic Geology↗

The molecular mechanism of Mo isotope fractionation during adsorption to birnessite

Fractionation of Mo isotopes during adsorption to manganese oxides is a primary control on the global ocean Mo isotope budget. Previous attempts to explain what drives the surprisingly large isotope effect δ97/95Modissolved-δ97/95Moadsorbed=1.8‰ have not successfully resolved the fractionation mechanism. New evidence from extended X-ray absorption fine structure analysis and density functional theory suggests that Mo forms a polymolybdate complex on the surfaces of experimental and natural samples. Mo in this polynuclear structure is in distorted octahedral coordination, while Mo remaining in solution is predominantly in tetrahedral coordination as MoO42- . Our results indicate that the difference in coordination environment between dissolved Mo and adsorbed Mo is the cause of isotope fractionation. The molecular mechanism of metal isotope fractionation in this system should enable us to explain and possibly predict metal isotope effects in other systems where transition metals adsorb to mineral surfaces.

Geochimica et Cosmochimica Acta↗

Spectral reflectance properties (0.4-2.5 μm) of secondary Fe-oxide, Fe-hydroxide, and Fe-sulphate-hydrate minerals associated with sulphide-bearing mine wastes

Diffuse reflectance spectra of 15 mineral species commonly associated with sulphide-bearing mine wastes show diagnostic absorption bands related to electronic processes involving ferric and/or ferrous iron, and to vibrational processes involving water and hydroxyl. Many of these absorption bands are relatively broad and overlapping; however, spectral analysis methods, including continuum removal and derivative analysis, permit most of the minerals to be distinguished. Key spectral differences between the minerals are illustrated in a series of plots showing major absorption band centres and other spectral feature positions. Because secondary iron minerals are sensitive indicators of pH, Eh, relative humidity, and other environmental conditions, spectral mapping of mineral distributions promises to have important application to mine waste remediation studies.

Geochemistry: Exploration, Environment, Analysis↗

Black shale - Its deposition and diagenesis.

Black shale is a dark-colored mudrock containing organic matter that may have generated hydrocarbons in the subsurface or that may yield hydrocarbons by pyrolysis. Many black shale units are enriched in metals severalfold above expected amounts in ordinary shale. Some black shale units have served as host rocks for syngenetic metal deposits. Black shales have formed throughout the Earth's history and in all parts of the world. This suggests that geologic processes and not geologic settings are the controlling factors in the accumulation of black shale. Geologic processes are those of deposition by which the raw materials of black shale are accumulated and those of diagenesis in response to increasing depth of burial. Depositional processes involve a range of relationships among such factors as organic productivity, clastic sedimentation rate, and the intensity of oxidation by which organic matter is destroyed. If enough organic material is present to exhaust the oxygen in the environment, black shale results. Diagenetic processes involve chemical reactions controlled by the nature of the components and by the pressure and temperature regimens that continuing burial imposes. For a thickness of a few meters beneath the surface, sulfate is reduced and sulfide minerals may be deposited. Fermentation reactions in the next several hundred meters result in biogenic methane, followed successively at greater depths by decarboxylation reactions and thermal maturation that form additional hydrocarbons. Suites of newly formed minerals are characteristic for each of the zones of diagenesis.

Clays and Clay Minerals↗

Deposits of the manganese oxides

One of the problems of the wartime program of studies of domestic manganese deposits concerned the identification of, and modes of origin of the manganese oxide minerals. Of the hundreds of specimens of the oxides collected in the United States, the minerals of about 250 specimens were identified by X-ray analysis; complete chemical analyses were made of about 35 specimens and partial analyses of about 150 specimens. This report presents the conclusions that arise out of a review of the geologic environment under which the specimens were found. One conclusion of this review concerns the supergene vs. hypogene origin of the oxides. In order to reach conclusions concerning the supergene and hypogene origin of the 33 oxides of manganese recognized thus far, it was necessary to define the criteria that seemed usable.One group of oxides appears to be persistently supergene: groutite, hydrohausmannite, lithiophorite, rancieite, hetaerolite, hydrohetaerolite, chalcophanite, crednerite, woodruffite, and wad. Another group of oxides appears to have been formed only by hypogene processes: manganosite, hausmannite, pyrochroite, bixbyite, galaxite, jacobsite, franklinite, pyrophanite, and ilmenite. A third group of oxides appear to have been formed by supergene processes in some places and by hypogene processes in other places: manganite, pyrolusite, ramsdellite, cryptomelane, psilomelane, hollandite, braunite, and coronadite.Another conclusion concerns a genetic relation between: (1) veins of manganese oxides in the southwest, largely in Tertiary volcanic rocks, (2) bodies of oxides in travertine aprons near active hot springs, and inactive Pleistocene springs, and (3) stratified oxides, largely in late Tertiary sedimentary rocks in the southwest. From the features of these three groups of deposits of oxides and their geologic and geographic distribution, it appears that hot water from great depth rose on fractures in areas of volcanic activity, deposited oxides in the fractures, appeared at the surface as hot springs, deposited oxides in the aprons near the springs and continuing to local basins, deposited manganese oxides with local debris as persistent beds in sediments, partly or wholly of volcanic origin.

Economic Geology↗

Carolina slate belt gold deposits in Virginia, North Carolina, South Carolina, and Georgia

The Southeastern United States, in particular, the Carolina slate belt of Virginia, North Carolina, South Carolina, and Georgia, has been an important region of mineral production (fig. 1). This region is thought to have major potential for containing large undiscovered deposits of gold and silver, as well as copper, lead, zinc, molybdenum, and tin. Gold production from the major mines (Haile, Brewer, Ridgeway, and Barite Hill) in South Carolina ranked sixth in the Nation in 1992. Despite the closing of all but one mine in 1997, the region continues to attract intense scrutiny by the mining industry. Current U.S. Geological Survey (USGS) efforts in the slate belt are led by a multidisciplinary team focused on an integrated, multistate, and multiyear project that has the potential to result in a fundamental reinterpretation of the economic geology of the region. The slate belt is considered a scientific frontier because of the rapid pace of data acquisition by the USGS, academia, and private sector geologists and because emerging concepts of its geologic evolution are controversial. Establishing the origin of the gold deposits is important, not only in guiding exploration, but for more accurate assessment of the potential for the occurrence of new deposits throughout the southern Appalachians. These efforts may result in further industry exploration that may lead to discovery of new economically viable mineral deposits, which would have a broad economic impact on the region. Another goal is to find ways to prevent human activities related to gold extraction from remobilizing toxic metals found in these deposits, which could have potential harmful effects on the environment.

Georgia, North Carolina, South Carolina, Virginia↗

U.S. Geological Survey ecosystems science strategy—Advancing discovery and application through collaboration

Executive Summary Ecosystem science is critical to making informed decisions about natural resources that can sustain our Nation’s economic and environmental well-being. Resource managers and policymakers are faced with countless decisions each year at local, regional, and national levels on issues as diverse as renewable and nonrenewable energy development, agriculture, forestry, water supply, and resource allocations at the urban-rural interface. The urgency for sound decisionmaking is increasing dramatically as the world is being transformed at an unprecedented pace and in uncertain directions. Environmental changes are associated with natural hazards, greenhouse gas emissions, and increasing demands for water, land, food, energy, mineral, and living resources. At risk is the Nation’s environmental capital, the goods and services provided by resilient ecosystems that are vital to the health and wellbeing of human societies. Ecosystem science—the study of systems of organisms interacting with their environment and the consequences of natural and human-induced change on these systems—is necessary to inform decisionmakers as they develop policies to adapt to these changes. This Ecosystems Science Strategy is built on a framework that includes basic and applied science. It highlights the critical roles that U.S. Geological Survey (USGS) scientists and partners can play in building scientific understanding and providing timely information to decisionmakers. The strategy underscores the connection between scientific discoveries and the application of new knowledge, and it integrates ecosystem science and decisionmaking, producing new scientific outcomes to assist resource managers and providing public benefits. We envision the USGS as a leader in integrating scientific information into decisionmaking processes that affect the Nation’s natural resources and human well-being. The USGS is uniquely positioned to play a pivotal role in ecosystem science. With its wide range of expertise, the Bureau can bring holistic, cross-scale, interdisciplinary capabilities to the design and conduct of monitoring, research, and modeling and to new technologies for data collection, management, and visualization. Collectively, these capabilities can be used to reveal ecological patterns and processes, explain how and why ecosystems change, and forecast change over different spatial and temporal scales. USGS science can provide managers with options and decision-support tools to use resources sustainably. The USGS has long-standing, collaborative relationships with the Department of the Interior (DOI) and other partners in the natural sciences, in both conducting science and applying the results. The USGS engages these partners in cooperative investigations that otherwise would lack the necessary support or be too expensive for a single bureau to conduct. The heart of this strategy is a framework for USGS ecosystems science that focuses on five long-term goals, which are seen as interconnected components that reinforce our vision of the USGS providing science that is at the forefront of decisionmaking: Improve understanding of ecosystem structure, function, and processes. The focus for this goal is an understanding of how ecosystems work, including the dynamics of species, their populations, interactions, and genetics, and how they change across spatial and temporal scales. Advance understanding of how drivers influence ecosystem change. The challenges here are explaining the drivers of ecosystem change, their spatio-temporal patterns, their uncertainties and interactions, and their influence on ecosystem processes and dynamics. Improve understanding of the services that ecosystems provide to society. Here the emphasis is on the measurement of environmental capital and ecosystem services, and the identification of sources and patterns of change in space and time. Develop tools, technologies, and capacities to inform decisionmaking about ecosystems. This includes developing new technologies and approaches for conducting applications-oriented ecosystem science. A principal challenge will be how to quantify uncertainty and incorporate it in decision analysis. Apply science to enhance strategies for management, conservation, and restoration of ecosystems. These challenges include development of novel approaches to monitoring, assessment, and restoration of ecosystems; new methods to address species of concern and communities at risk; and innovations in decision analysis and support to address imminent ecosystem changes or those that are underway. Closely integrated with the five goals are four strategic approaches that provide the path forward for the USGS Ecosystems Mission Area. These approaches cross-cut all of the goals and are seen as essential to the implementation of this strategy: Assess information needs for ecosystem science through enhanced partnerships. Work with the DOI and other agencies and institutions to identify, design, and implement priority decision-driven ecological research. Promote the use of interdisciplinary ecosystem science. Design and conduct interdisciplinary process-oriented research in ecosystem science. Enhance modeling and forecasting. Build models to forecast ecosystem change, assess future management scenarios, and reduce uncertainties through an adaptive learning process. Support decisionmaking. Use quantitative approaches to assess the vulnerabilities of ecosystems, habitats, and species, and evaluate strategies for adaptation, restoration, and sustainable management. Following the four strategic approaches are a set of proposed actions that represent a sampling of specific USGS activities that align with this strategy and that address the Nation’s most pressing environmental needs. The strategy emphasizes coordination of activities across the USGS mission areas pursuant to these goals. Ecosystem science is inherently interdisciplinary and requires a broad perspective that incorporates the biological and physical sciences, climate science, information technology, and scientific capacity in mission areas across the Bureau. With its emphasis on coordination, this strategy can provide a critical underpinning for integrated science efforts with scientists from multiple mission areas of the USGS working together. Of course, the USGS will continue to conduct discipline-specific and interdisciplinary investigations, and both will continue to be vital parts of the ecosystem science portfolio. Finally, the strategy stresses the importance of coordination with other Federal agencies and organizations in the natural resources community. The USGS collaborates with resource agencies in the DOI and other organizations throughout the world to meet societal needs for species and ecosystem management. Working with these agencies and organizations, the USGS will play a key role in guiding sound decisionmaking during the next decade by advancing the scientific foundation for sustaining the natural resources that diverse, productive, resilient ecosystems provide.

Circular↗