SEARCH · Search USGS

Results for “Minerals and the Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

USGS2005

Mineral mapping on the Chilean-Bolivian Altiplano using co-orbital ALI, ASTER and Hyperion imagery: Data dimensionality issues and solutions

Hyperspectral data coverage from the EO-1 Hyperion sensor was useful for calibrating Advanced Land Imager (ALI) and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) images of a volcanic terrane area of the Chilean-Bolivian Altiplano. Following calibration, the ALI and ASTER datasets were co-registered and joined to produce a 13-channel reflectance cube spanning the Visible to Short Wave Infrared (0.4-2.4 ??m). Eigen analysis and comparison of the Hyperion data with the ALI + ASTER reflectance data, as well as mapping results using various ALI+ASTER data subsets, provided insights into the information dimensionality of all the data. In particular, high spectral resolution, low signal-to-noise Hyperion data were only marginally better for mineral mapping than the merged 13-channel, low spectral resolution, high signal-to-noise ALI + ASTER dataset. Neither the Hyperion nor the combined ALI + ASTER datasets had sufficient information dimensionality for mapping the diverse range of surface materials exposed on the Altiplano. However, it is possible to optimize the use of the multispectral data for mineral-mapping purposes by careful data subsetting, and by employing other appropriate image-processing strategies.

Remote Sensing of Environment↗

USGS1979

Analysis of borehole geophysical information across a uranium deposit in the Jackson Group, Karnes County, Texas

Borehole geophysical studies across a uranium deposit in the Jackson Group, South Texas, show the three geochemical environments often associated with uranium roll-type deposits: an altered (oxidized) zone, an ore zone, and an unaltered (reduced) zone. Mineralogic analysis of the total sulfides contained in the drill core shows only slight changes in the total sulfide content among the three geochemical regimes. However, induced polarization measurements on the core samples indicate that samples obtained from the reduced side of the ore zone are more electrically polarizable than those from the oxidized side of the ore zone, and therefore probably contain more pyrite. Analysis of the clay-size fraction in core samples indicates that montmorillonite is the dominant clay mineral. High resistivity values within the ore zone indicate the presence of calcite cement concentrations that are higher than those seen outside of the ore zone. Between-hole resistivity and induced polarization measurements show the presence of an extensive zone of calcite cement within the ore zone, and electrical polarizable material (such as pyrite) within and on the reduced side of the ore zone. A quantitative analysis of the between-hole resistivity data, using a layered-earth model, and a qualitative analysis of the between-hole induced polarization measurements showed that mineralogic variations among the three geochemical environments were more pronounced than were indicated by the geophysical and geologic well logs. Uranium exploration in the South Texas Coastal Plain area has focused chiefly in three geologic units: the Oakville Sandstone, the Catahoula Tuff, and the Jackson Group. The Oakville Sandstone and the Catahoula Tuff are of Miocene age, and the Jackson Group is of Eocene age (Eargle and others, 1971). Most of the uranium mineralization in these formations is low grade (often less than 0.02 percent U3O8) and occurs in shallow deposits that are found by concentrated exploratory drilling programs. The sporadic occurrence of these deposits makes it desirable to develop borehole geophysical techniques that will help to define the depositional environments of the uranium ore, which is characterized by geochemical changes near the uranium deposits. Geochemical changes are accompanied by changes in the physical characteristics of the rocks that can be detected with borehole geophysical tools. This study is concerned with a uranium deposit within the Jackson Group that is located just east of Karnes City, Tex. Five holes were drilled on this property to obtain borehole geophysical data and cores. The cores were analyzed for mineralogic and electrical properties. The borehole geophysical information at this property included induced polarization, resistivity, gamma-gamma density, neutron-neutron, gamma-ray, caliper, and single-point-resistance logs. Between-hole resistivity and induced polarization measurements were made between hole pairs across the ore deposit and off the ore deposit.

Open-File Report↗

USGS2004

Geochemistry of shallow ground water in coastal plain environments in the southeastern United States: Implications for aquifer susceptibility

Ground-water chemistry data from coastal plain environments have been examined to determine the geochemical conditions and processes that occur in these areas and assess their implications for aquifer susceptibility. Two distinct geochemical environments were studied to represent a range of conditions: an inner coastal plain setting having more well-drained soils and lower organic carbon (C) content and an outer coastal plain environment that has more poorly drained soils and high organic C content. Higher concentrations of most major ions and dissolved inorganic and organic C in the outer coastal plain setting indicate a greater degree of mineral dissolution and organic matter oxidation. Accordingly, outer coastal plain waters are more reducing than inner coastal plain waters. Low dissolved oxygen (O2) and nitrate (NO 3-) concentrations and high iron (Fe) concentrations indicate that ferric iron (Fe (III)) is an important electron acceptor in this setting, while dissolved O2 is the most common terminal electron acceptor in the inner coastal plain setting. The presence of a wide range of redox conditions in the shallow aquifer system examined here underscores the importance of providing a detailed geochemical characterization of ground water when assessing the intrinsic susceptibility of coastal plain settings. The greater prevalence of aerobic conditions in the inner coastal plain setting makes this region more susceptible to contamination by constituents that are more stable under these conditions and is consistent with the significantly (p<0.05) higher concentrations of NO3- found in this setting. Herbicides and their transformation products were frequently detected (36% of wells sampled), however concentrations were typically low (<0.1 ??g/L). Shallow water table depths often found in coastal plain settings may result in an increased risk of the detection of pesticides (e.g., alachlor) that degrade rapidly in the unsaturated zone.

Applied Geochemistry↗

USGS2020

Position-specific distribution of hydrogen isotopes in natural propane: Effects of thermal cracking, equilibration and biodegradation

Intramolecular isotope distributions, including isotope clumping and position specific fractionation, can provide proxies for the formation temperature and formation and destruction pathways of molecules. In this study, we explore the position-specific hydrogen isotope distribution in propane. We analyzed propane samples from 10 different petroleum systems with high-resolution molecular mass spectrometry. Our results show that the hydrogen isotope fractionation between central and terminal positions of natural propanes ranges from −102‰ to +205‰, a much larger range than that expected for thermodynamic equilibrium at their source and reservoir temperatures (36–63‰). Based on these findings, we propose that the hydrogen isotope structure of catagenic propane is largely controlled by irreversible processes, expressing kinetic isotope effects (KIEs). Kinetic control on hydrogen isotope composition of the products of thermal cracking is supported by a hydrous pyrolysis experiment using the Woodford Shale as substrate, in which we observed isotopic disequilibrium in the early stage of pyrolysis. We make a more general prediction of KIE signatures associated with kerogen cracking by simulating this chemistry in a kinetic Monte Carlo model for different types of kerogens. In contrast, unconventional shale fluids or hot conventional reservoirs contain propane with an isotopic structure close to equilibrium, presumably reflecting internal and/or heterogeneous exchange during high temperature storage (ca. 100–150 °C). In relatively cold (<100 °C) conventional gas accumulations, propane can discharge from its source to a colder reservoir, rapidly enough to preserve disequilibrium signatures even if the source rock thermal maturity is high. These findings imply that long times at elevated temperatures are required to equilibrate the hydrogen isotopic structure of propane in natural gas host rocks and reservoirs. We further defined the kinetics of propane equilibration through hydrogen isotope exchange experiments under hydrous conditions; these experiments show that hydrogen in propane is exchangeable over laboratory timescales when exposed to clay minerals such as kaolinite. This implies rather rapid transfer of propane from sources to cold reservoirs in some of the conventional petroleum systems. Propane is also susceptible to microbial degradation in both oxic and anoxic environments. Biodegradation of propane in the Hadrian and Diana Hoover oil fields (Gulf of Mexico) results in strong increases in central-terminal hydrogen isotope fractionation. This reflects preferential attack on the central position, consistent with previous studies.

Geochimica et Cosmochimica Acta↗

USGS2009

A New Occurrence Model for National Assessment of Undiscovered Volcanogenic Massive Sulfide Deposits

Volcanogenic massive sulfide (VMS) deposits are very significant current and historical resources of Cu-Pb-Zn-Au-Ag, are active exploration targets in several areas of the United States and potentially have significant environmental effects. This new USGS VMS deposit model provides a comprehensive review of deposit occurrence and ore genesis, and fully integrates recent advances in the understanding of active seafloor VMS-forming environments, and integrates consideration of geoenvironmental consequences of mining VMS deposits. Because VMS deposits exhibit a broad range of geological and geochemical characteristics, a suitable classification system is required to incorporate these variations into the mineral deposit model. We classify VMS deposits based on compositional variations in volcanic and sedimentary host rocks. The advantage of the classification method is that it provides a closer linkage between tectonic setting and lithostratigraphic assemblages, and an increased predictive capability during field-based studies.

Open-File Report↗

USGS1978

Wood River mining district, Idaho - intrusion-related lead-silver deposits derived from country rock source

Lead-silver deposits in the Wood River mining district occur in shear zones in hornfelsed argillite of the Devonian Milligen Formation near granitic plutons and under the Wood River thrust fault. The principal ore minerals are argentiferous galena and sphalerite; siderite is the principal gangue. The δ 34 S values of the sulfide minerals range from +2.2 to +15.0 permil, indicating that the sulfur had a shallow crustal source. Δ 34 S values between sphalerite and galena range from +2.3 to +3.4 permil, corresponding to sulfur isotope temperatures between 280° and 182 °C. Hydrothermal barite has a δ 34 S of +13.2 permil. Lead isotope ratios are radiogenic, also pointing to a shallow crustal source. Quartz gangue has δ 18 O of +16.4 permil and a calculated δ 18 O H20 at 270°C of +8.4 permil. This value is reasonable for a hydrothermal fluid that had reached equilibrium with the argillite country rock. The siderite gangue has δ 18 O and δ 13 C values of +14.0 and -5.5 permil, respectively. Fluid inclusions have homogenization temperatures of 244°-307°C and average 270°C. Freezing-stage measurements ranged from -1.85 to -2.8°C, suggesting salinities of 3.2 to 4.8 weight percent. The δD values of inclusion fluid in ore and gangue minerals are -110 to -120 permil. The geology, isotope, and fluid-inclusion data are consistent with a model of hydrothermal systems of meteoric water in faulted and shattered Paleozoic rocks near plutonic masses. This environment permitted deep circulation of the hydrothermal fluids, which dissolved the metals and sulfur from the Paleozoic host rocks and deposited ore in favorable beds or structures under the regional Wood River thrust fault.

Idaho↗

USGS2022

Geochemical studies of the Green River Formation in the Piceance Basin, Colorado: I. Major, minor, and trace elements

The Eocene Green River Formation contains the largest oil shale deposits in the world and is a welldocumented example of a lacustrine depositional system. In addition, mineral resources associated with oil shale in the Piceance Basin nahcolite [NaHCO3] and dawsonite [NaAl(CO3)(OH)2)] are of current and potential economic value, respectively. Detailed geochemical analysis across the basin can aid in the understanding of the depositional environment, sedimentary processes, and water-chemistry evolution in this system. Quantitative geochemical data for Green River oil shale from the Piceance Basin of Colorado were collected by inductively coupled plasma optical emission spectroscopy and mass spectrometry as part of this study. The basin margin is represented by samples from exposures at Douglas Pass (Garfield County) and the basin center area is characterized by core samples from two drilled wells: the Shell 23X-2 and John Savage 24-1 (Rio Blanco County). Major elements and groups of elements are used as proxies for clastic influx (Si, Al, K, Ti), carbonate deposition (Ca, Mg), salinity (Na), paleo-productivity (P), and redox state (Fe, S), respectively. Minor and trace elements reinforce observations based on major elements, including Rb, Zr, Nb for clastic influx and Mn, Sr for carbonate. Trace elements are used to characterize redox conditions (As, Mo, U, V, Co, Ni, Cu, Zn) and salinity (Rb/K, B/Ga). Chemical distinctions between the basin margin and the basin center, in terms of these components and total organic carbon concentrations, support the model of a permanently stratified lake through most of the depositional interval. A primary purpose of the study was to conduct more extensive sampling to confirm conclusions of a previous reconnaissance study. Geochemical data from this study indicates elevated Na around the basin margin occurring earlier than in the deeper basin. Early in the history of Lake Uinta, the salinity may have been elevated first in the shallower marginal waters, due to increased evaporation, which then led to elevated salinity in the basin center through transport of saline density currents. Other indicators of salinity (Rb/K, B/Ga) do not track Na content in intervals where clay minerals are absent due to diagenetic alteration under hypersaline conditions but may be used to indicate the salinities at which authigenic Na-bearing minerals begin to form. Most Na-rich samples show high proportions of clastic constituents (Si, Al, K, Ti) compared to conventional carbonate constituents (Ca, Mg). Redox-sensitive period IV transition metal elements (V, Co, Ni, Cu, Zn) show only local occurrence of significant enrichment relative to average shale abundances. Analysis of Fe/Al ratios for this dataset suggests that the depletion of these elements may be related to source rocks depleted in mafic constituents, with apparent redox-related enrichments subdued by this effect. The basin margin samples reflect generally oxic bottom waters, with some intervals deposited under more reducing, possibly dysoxic to anoxic conditions. The basin center results indicate more reducing conditions, with Mo and U enrichment factors suggesting operation of a particulate shuttle mechanism that scavenged Mo on Fe/Mn-oxyhydroxides that redissolved at depth, with Mo precipitating along with sulfides and/or organic matter at or near the sediment/water interface.

Colorado↗

USGS2021

GIS-based identification of areas that have resource potential for lode gold in Alaska

Several comprehensive, data-driven geographic information system (GIS) analyses were conducted to assess prospectivity for lode gold in Alaska. These analyses use available geospatial datasets of lithologic, geochemical, mineral occurrence, and geophysical data to build models for recognizing different types of gold deposits within physiographic units defined by stream drainage basins that are approximately 100 square kilometers in area. The analytical methods successfully delineated areas in the State that contain known lode gold deposits and occurrences, providing some measure of confidence in their ability to predict gold prospectivity in areas of unknown lode gold potential. The results of our analyses indicate high prospectivity in a few areas scattered around the State that are not known to contain lode gold deposits. In addition to assessing the potential for lode gold deposits in Alaska, we designed analyses to distinguish different lode gold deposit types, including orogenic, reduced-intrusion-related, epithermal, and gold-bearing porphyry. These can primarily be differentiated using their unique trace element geochemical fingerprints and elemental enrichments, which reflect the characteristics of the geologic environment and chemistry of the ore-forming fluids. We identified multiple parameters that would discriminate the different types of gold deposits, but owing to the limits of available data, the compositional similarity of ore-forming fluids among some types of lode gold deposits, and overlapping geologic environments, distinguishing deposit types at the state scale in Alaska remains problematic. These limitations resulted in overlapping areas of prospectivity for different deposit types, highlighting the challenges for targeted gold exploration in Alaska. Adjustment of some scoring parameters and recharacterization at smaller scales to highlight individual mineral systems for application of prospectivity analyses may be helpful at a district scale. At a regional scale, the aerial overlap of individual deposit type analyses reinforces confidence in prospectivity for a lode gold resource in a drainage basin. Our analysis for undivided lode gold deposits will be the most practical analysis for landuse decisions in which delineation of areas that have confident potential for gold deposits in general is the primary goal. Data-driven GIS analysis for lode gold potential in Alaska, although limited by the size and uneven coverage of available datasets, objectively indicates prospectivity in areas where exposure is good as well as in areas under cover. The results of our analyses show medium to high prospectivity in areas that surround known deposits, indicating an overall expansion of areas that have the potential to contain gold deposits. Exploration in these areas may help improve the balance between the volume of gold produced in placer districts statewide and the relatively low volume of identified lode resources that contribute to these placer deposits. The results of our analyses can help focus future investigations in areas that show prospectivity but are not known to contain gold deposits, as well as in areas where data are lacking and the geology is poorly understood, and acquisition of additional data may help better define and constrain gold prospectivity.

Alaska↗

USGS2017

Evidence for early life in Earth’s oldest hydrothermal vent precipitates

Although it is not known when or where life on Earth began, some of the earliest habitable environments may have been submarine-hydrothermal vents. Here we describe putative fossilized microorganisms that are at least 3,770 million and possibly 4,280 million years old in ferruginous sedimentary rocks, interpreted as seafloor-hydrothermal vent-related precipitates, from the Nuvvuagittuq belt in Quebec, Canada. These structures occur as micrometre-scale haematite tubes and filaments with morphologies and mineral assemblages similar to those of filamentous microorganisms from modern hydrothermal vent precipitates and analogous microfossils in younger rocks. The Nuvvuagittuq rocks contain isotopically light carbon in carbonate and carbonaceous material, which occurs as graphitic inclusions in diagenetic carbonate rosettes, apatite blades intergrown among carbonate rosettes and magnetite–haematite granules, and is associated with carbonate in direct contact with the putative microfossils. Collectively, these observations are consistent with an oxidized biomass and provide evidence for biological activity in submarine-hydrothermal environments more than 3,770 million years ago.

Quebec↗

USGS2016

Transformations to granular zircon revealed: Twinning, reidite, and ZrO 2 in shocked zircon from Meteor Crater (Arizona, USA)

Granular zircon in impact environments has long been recognized but remains poorly understood due to lack of experimental data to identify mechanisms involved in its genesis. Meteor Crater in Arizona (United States) contains abundant evidence of shock metamorphism, including shocked quartz, the high pressure polymorphs coesite and stishovite, diaplectic SiO2 glass, and lechatelierite (fused SiO2). Here we report the presence of granular zircon, a new shocked mineral discovery at Meteor Crater, that preserve critical orientation evidence of specific transformations that occurred during its formation at extreme impact conditions. The zircon grains occur as aggregates of sub-µm neoblasts in highly shocked Coconino Formation Sandstone (CFS) comprised of lechatelierite. Electron backscatter diffraction shows that each grain consists of multiple domains, some with boundaries disoriented by 65°<110>, a known {112} shock-twin orientation. Other domains have crystallographic c-axes in alignment with {110} of neighboring domains, consistent with the former presence of the high pressure ZrSiO4 polymorph reidite. Additionally, nearly all zircon preserve ZrO2 + SiO2, providing evidence of partial dissociation. The genesis of CFS granular zircon started with detrital zircon that experienced shock-twinning and reidite formation from 20 to 30 GPa, ultimately yielding a phase that retained crystallographic memory; this phase subsequently recrystallized to systematically oriented zircon neoblasts, and in some areas partially dissociated to ZrO2. The lechatelierite matrix, experimentally constrained to form at >2000 °C, provided an ultra high-temperature environment for zircon dissociation (~1670 °C) and neoblast formation. The capacity of granular zircon to preserve a cumulative P-T record has not been recognized previously, and provides a new method for retrieving histories of impact-related mineral transformations in the crust at conditions far beyond which most rocks melt.

Arizona↗

USGS2020

Geochemical and mineralogical study of the Red Mountain porphyry copper-molybdenum deposit and vicinity, Santa Cruz County, Arizona

The Red Mountain porphyry copper-molybdenum deposit (Cu-Mo deposit or PCD) is located in the northern part of the Patagonia Mountains, Santa Cruz County, Arizona. Extensive core drilling has delineated a large, deep-seated, structurally intact mineral system that extends from the present surface to depths of more than 1,765 meters. This system is hosted in a thick complex of predominantly felsic to andesitic volcanic rocks of the Cretaceous Period. This complex was intruded by scattered bodies of the Tertiary Period that are predominantly quartz monzonite porphyry; no major associated source intrusion has yet been found at depth. A total of 818 samples of core were analyzed for as many as 44 elements. The abundances and distributions at depth of at least 17 of these elements (silver [Ag], arsenic [As], gold [Au], boron [B], bismuth [Bi], copper [Cu], mercury [Hg], potassium [K], molybdenum [Mo], lead [Pb], sulfur [S], antimony [Sb], tin [Sn], tellurium [Te], thallium [Tl], tungsten [W], and zinc [Zn]) are related mostly to events that generated the Red Mountain system. Many of these same samples were also analyzed by X-ray diffraction for a suite of minerals. The multielement and mineralogical analyses of the core samples provide important information about the concentrations, associations, and distributions of select elements and minerals, including zoning patterns that may not be apparent from visual examination of core samples. The distributions of selected elements and minerals in these samples reveal an unusually complete mineral system that extends from a typical PCD with potassic alteration at depth to peripheral zones of phyllic and advanced argillic alteration as well as a copper-rich supergene enriched zone and the remnants of a leached cap. R-mode factor analysis was run with 34 elements for a set of samples from the deep part of the hypogene Cu-Mo deposit and another set from the part of the supergene zone with the highest copper enrichment. For the hypogene zone dataset, five factors are related to the PCD: (1) Ag, Cu, Mo, S, and Te; (2) As, B, Hg, and Sb; (3) Au and sodium (Na); (4) manganese (Mn), Pb, and Zn; and (5) K and Tl. For the supergene dataset, the deposit-related factors include (1) Cu, Mo, S, and Te; (2) Ag, As, Hg, Pb, Sb, and Tl; (3) Au and Na; and (4) K and rubidium (Rb). The changes in element associations between the two datasets indicate that some of these new associations are a result of formation of several suites of hypogene minerals in the deep part of the deposit and different hypogene mineral suites in the peripheral part of the deposit. Some changes may be because of the effects of supergene processes. Zones containing deposit-related elements and minerals common to many PCDs are present at Red Mountain. These zones include a crude, inverted cup-shaped shell containing anomalous copper accompanied by high concentrations of Ag, Au, K, Mo, total S, sulfate S, Sb, Te, and Tl, as well as local concentrations of As, B, Hg, Pb, and Zn. Hydrothermal minerals spatially associated with the deep hypogene Cu-Mo deposit include chalcopyrite, molybdenite, pyrite, plagioclase, orthoclase, biotite, magnetite, calcite, quartz, and anhydrite. Many of the hydrothermally deposited elements that are spatially related to the deposit are also concentrated in zones above the deep part of the deposit, including Ag, As, K, Pb, Sb, Te, Tl, and Zn. These elements are concentrated either (1) in generally wide, flat zones present in the upper part of the system or (2) in crudely arcuate peripheral zones found mainly in the middle part of the system and surrounding the deep part of the deposit. Near-surface, restricted hypogene anomalies are present for bismuth, mercury, tin, and tungsten. The upper part of the deposit has been subjected to supergene enrichment and weathering. Deposit-related elements that remain anomalous in this area include Ag, As, Au, B, Bi, cobalt (Co), Cu, Hg, Mo, Pb, S, Sb, Sn, Te, Tl, uranium (U), and W. These positive concentrations indicate that, with the exception of copper and possibly mercury and uranium, these elements had relatively low chemical mobilities in the supergene enrichment and later weathering environments at Red Mountain. Most may have been deposited during one or more hypogene events and then redistributed locally during later events. Zinc is the only deposit-related element that has clearly been depleted as a result of supergene and (or) weathering events. Minerals that are common in the unweathered upper part of the system include chalcocite, pyrite, quartz, sericite, alunite, and pyrophyllite, as well as less common covellite, enargite, tennantite, tourmaline, barite, anglesite, and other sulfide or sulfate minerals. Subsequent to formation of the Red Mountain Cu-Mo deposit and supergene enrichment, chemical weathering produced an area of pervasive hematite and other iron oxides in the near-surface part of the deposit to form a leached cap. These iron-rich minerals formed primarily as a result of the oxidation of pyrite. This event was accompanied by losses of cobalt, mercury, magnesium, and zinc, as well as destruction of sericite, plagioclase, pyrite, clay minerals, and pyrophyllite. A total of 122 rock samples, 119 soil samples, and samples of three plant species (57 mesquite, 108 oak, and 68 juniper) were collected over and around Red Mountain. For the rock and soil samples, the distributions of anomalous Ag, As, Bi, Cu, Fe, Mo, Pb, Sb, Te, and Tl best delineated the exposed part of the deposit. The highest concentrations of many of these elements are centered on one or both of two main areas with exposures of quartz monzonite porphyry. The high concentrations of arsenic in the deposit area (as much as 390 parts per million (ppm) in rock and 1,500 ppm in soil) and of lead (as much as 2,370 ppm in rock and 1,490 ppm in soil) are particularly noteworthy. The concentrations of various elements in the plant ash vary widely among the three species and are species dependent. Many of the deposit-related elements are either nonessential for plant growth or are considered toxic at certain concentration ranges. In spite of this, the distributions of potentially toxic Ag, As, Bi, Cd, Cu, Mo, Pb, Sb, selenium (Se), and Zn produce deposit-related anomalies for one or more of the three species. Vegetation sampling offered no advantage over rock or soil sampling as an exploration tool. From an environmental standpoint, however, the plant analyses provide baseline data for both essential and nonessential elements that might be useful, for example, for selecting native plant species for revegetating mine waste areas. The exposed part of the Red Mountain deposit has not been greatly disturbed as a result of mining and other activities. However, some of the rock, soil, and plant samples that were collected near the Harshaw Creek and Alum Gulch drainages, which are peripheral to Red Mountain, are also anomalous for various deposit-related elements. These anomalies are probably the result of dispersion of stream sediments contaminated with material from past mining.

Arizona↗

USGS2015

Context of ancient aqueous environments on Mars from in situ geologic mapping at Endeavour Crater

Using the Mars Exploration Rover Opportunity , we have compiled one of the first field geologic maps on Mars while traversing the Noachian terrain along the rim of the 22 km diameter Endeavour Crater (Latitude −2°16′33″, Longitude −5°10′51″). In situ mapping of the petrographic, elemental, structural, and stratigraphic characteristics of outcrops and rocks distinguishes four mappable bedrock lithologic units. Three of these rock units predate the surrounding Burns formation sulfate-rich sandstones and one, the Matijevic Formation, represents conditions on early Mars predating the formation of Endeavour Crater. The stratigraphy assembled from these observations includes several geologic unconformities. The differences in lithologic units across these unconformities record changes in the character and intensity of the Martian aqueous environment over geologic time. Water circulated through fractures in the oldest rocks over periods long enough that texturally and elementally significant alteration occurred in fracture walls. These oldest pre-Endeavour rocks and their network of mineralized and altered fractures were preserved by burial beneath impact ejecta and were subsequently exhumed and exposed. The alteration along joints in the oldest rocks and the mineralized veins and concentrations of trace metals in overlying lithologic units is direct evidence that copious volumes of mineralized and/or hydrothermal fluids circulated through the early Martian crust. The wide range in intensity of structural and chemical modification from outcrop to outcrop along the crater rim shows that the ejecta of large (>8 km in diameter) impact craters is complex. These results imply that geologic complexity is to be anticipated in other areas of Mars where cratering has been a fundamental process in the local and regional geology and mineralogy.

Journal of Geophysical Research E: Planets↗

USGS2017

Tracer-based evidence of heterogeneity in subsurface flow and storage within a boreal hillslope

Runoff from boreal hillslopes is often affected by distinct soil boundaries, including the frozen boundary and the organic – mineral boundary (OMB), where highly porous and hydraulically-conductive organic material overlies fine-grained mineral soils. Viewed from the surface, ground cover appears as a patchwork on sub-meter scales, with thick, moss mats interspersed with lichen-covered, silty soils with gravel inclusions. We conducted a decameter-scale subsurface tracer test on a boreal forest hillslope in interior Alaska to quantify locations and mechanisms of transport and storage in these soils, focusing on the OMB. A sodium bromide tracer was added as a slug addition to a pit and sampled at 40 down-gradient wells, screened primarily at the OMB and within a 7 by 12 m well field. We maintained an elevated head in the injection pit for 8.5 h to simulate a storm. Tracer breakthrough velocities ranged from < 0.12 to 0.93 m hr-1, with the highest velocities in lichen-covered soils. After 12 hours and cessation of the elevated head, the tracer coalesced and was only detected in thick mosses at a trough in the OMB. By 24 hours, approximately 17% of the tracer mass could be accounted for. The majority of the mass loss occurred between 4 and 12 hours, while the tracer was in contact with lichen-covered soils, which is consistent with tracer transport into deeper flow paths via preferential flow through discrete gravelly areas. Slow breakthroughs suggest that storage and exchange also occurred in shallow soils, likely related to saturation and drainage in fine-grained mineral soils caused by the elevated hydraulic head. These findings highlight the complex nature of storage and transmission of water and solutes from boreal hillslopes to streams, and are particularly relevant given rapid changes to boreal environments related to climate change, thawing permafrost and increasing fire severity.

Hydrological Processes↗

USGS1971

Structure and petrology of the alpine-type peridotite at Burro Mountain, California, U.S.A.

The alpine-type peridotite at Burro Mountain is a partially serpentinized harzburgite-dunite body approximately 2 km in diameter. It lies in a chaotic mélange derived from the Franciscan Formation (Upper Jurassic to Upper Cretaceous) of the southern Coast Ranges of California. The peridotite is bounded on the east by a vertical fault in the Nacimiento fault zone that brings sedimentary rocks of Taliaferro's (1943 b ) Asuncion Group (Upper Cretaceous) into contact with the peridotite. The peridotite appears to be one of a number of tectonic lenses, having a wide range in size, that make up the mélange . These lenses include metagraywacke, metachert, greenstone, amphibolite, and blueschist, as well as ultramafic rocks, and represent a wide range of pressure-temperature environments. The outer shell of the peridotite is a sheared serpentinite zone 10–15 m thick. The peridotite was tectonically emplaced at its present level as a cold solid mass and had little effect on the mineral assemblages of the Franciscan Formation. Local development of lawsonite and aragonite in shear zones may be related to the peridotite emplacement. Foliated harzburgite forms approximately 60 per cent of the peridotite. It is a lithologically uniform rock that has an olivine: orthopyroxene ratio of approximately 75:25. Accessory clinopyroxene and chromian spinel generally make up less than 5 per cent of the harzburgite. Dunite, composed of olivine, accessory chromian spinel (< 5 per cent), and trace amounts of pyroxene, makes up approximately 40 per cent of the peridotite and occurs as dikes, sills, and irregular bodies in the harzburgite. Olivine and pyroxene show small but significant compositional variations and chromian spinel shows a large range in the cation ratio Cr/(Cr+Al+ Fe 3+ ). The compositional variations in these minerals are related to original differences in bulk chemical composition. The following compositional ranges were determined for minerals in the harzburgite: olivine, Fo 91.1 −Fo 91.4 ; orthopyroxene, En 89.8 −En 91.1 ; clinopyroxene, Ca 47.0 Mg 50.0 Fe 3.0 −Ca 48.7 Mg 48.2 Fe 3.1 ; chromian spinel, Cr/(Cr+Al+Fe 3+ ) 0.37−0.55. The pyroxenes have a range in A1 2 O 3 content of 1.3−3.0 wt per cent. Olivine from dunite ranges from Fo 91 to Fo 92 7 and the chromian spinel has a range in the Cr/(Cr+Al+Fe 3+ ) ratio of 0.30−0.75. Although all the dunites are lithologically similar, three distinct types are recognized on the basis of composition of coexisting olivine and chromian spinel. Structural relations between the three types of dunite suggest three periods of emplacement (possibly overlapping) of dunite into harzburgite. The evidence indicates that the dunite, and probably also the harzburgite crystallized from an ultramafic magma, probably in the upper mantle. After the magmatic episode and crystallization, the peridotite was subjected to a deep-seated plastic deformation and recrystallization. The first phase of the deformation produced a pervasive, planar structural element (S 1 ) that crosscuts many harzburgite-dunite contacts. It is probable that some of the dunite sills were emplaced during this deformation. The foliation, S 1 , is defined by layers of different orthopyroxene content in harzburgite, and by discontinuous layers of chromian spinel in dunite. Flow or slip along S 1 produced slip folds in harzburgite—dunite contacts with axial planes parallel to S 1 . At a later stage, isoclinal folds developed in S 1 , and the present olivine microfabric was probably formed by recrystallization in the stress field that produced the isoclinal folding. In the olivine microfabric, X tends to be perpendicular to the axial planes (S 2 ) of the isoclinal folds and Y and Z tend to form double maxima in S 2 approximately 90° apart. Mg−Fe 2+ distribution between coexisting mineral pairs yields a calculated temperature of formation of approximately 1200 °C. Although this temperature is only a nominal value, it indicates that the mineral pairs equilibrated at a significantly high temperature. In view of the deformation and recrystallization, the calculated temperature possibly represents subsolidus re-equilibration of the minerals during this event. The deformation and recrystallization probably occurred shortly after crystallization while the peridotite was still at a high temperature. A later deep-seated deformation produced small scattered kink folds in S 1 that tend to disrupt the major olivine microfabric. The kink folding was accompanied or followed by the development of kink bands in olivine that reflect intragranular gliding on the system T = [ Okl ], t = [100]. The kink bands probably formed at a minimum temperature of 1000 °C. Following the deep-seated deformation, which probably took place in the mantle, the peridotite mass was tectonically detached and moved upward to its present level in the crust. Cleavages, joints, and faults provided channels for water to pervade the peridotite and allow alteration of the primary minerals.

California↗

USGS2015

Lithostratigraphic, borehole-geophysical, hydrogeologic, and hydrochemical data from the East Bay Plain, Alameda County, California

The U.S. Geological Survey, in cooperation with the East Bay Municipal Utility District, carried out an investigation of aquifer-system deformation associated with groundwater-level changes at the Bayside Groundwater Project near the modern San Francisco Bay shore in San Lorenzo, California. As a part of the Bayside Groundwater Project, East Bay Municipal Utility District proposed an aquifer storage and recovery program for 1 million gallons of water per day. The potential for aquifer-system compaction and expansion, and related subsidence, uplift, or both, resulting from aquifer storage and recovery activities were investigated and monitored in the Bayside Groundwater Project. In addition, baseline analysis of groundwater and substrata properties were performed to assess the potential effect of such activities. Chemical and physical data, obtained from the subsurface at four sites on the east side of San Francisco Bay in the San Lorenzo and San Leandro areas of the East Bay Plain, Alameda County, California, were collected during the study. The results of the study were provided to the East Bay Municipal Utility District and other agencies to evaluate the chemical and mechanical responses of aquifers underlying the East Bay Plain to the future injection and recovery of imported water from the Sierra Nevada of California. Among 4 sites, 14 piezometers and 2 extensometers were installed in 6 boreholes, which ranged in depth from 460 to 1,040 feet. The lithology of drill cuttings, collected at 5- or 10-foot intervals, was described for grain size and any other noticeable features, such as wood or shell fragments. Borehole geophysical logging was performed at each site in the deepest borehole, immediately following drilling. Drill-core samples, totaling 284 feet, were collected at the Bayside site. The drill-core sediment was subsampled to determine pore-water chemistry, vertical hydraulic conductivity, and physical and mechanical properties at different depths. Depositional environment and age were determined by luminescence geochronology and fossil identification. The elemental composition of the drill-core sediments was determined by inductively coupled plasma mass spectroscopy and instrumental neutron activation by abbreviated count analysis. Mineral composition was determined by X-ray diffraction and scanning electron microscopy analysis. Groundwater samples were collected from all 14 piezometers as part of either the USGS Groundwater Ambient Monitoring and Assessment or the USGS National Water Quality Assessment program for water-quality analyses. Sample analytes included nutrients, major and minor ions, trace elements, isotopic ratios of hydrogen and oxygen in water, carbon-14, and tritium. Water-level and aquifer-system-compaction measurements, which indicated diurnal and seasonal fluctuations, were made at the Bayside Groundwater Project site. Slug tests were performed at the Bayside piezometers and nine pre-existing wells to estimate hydraulic conductivity.

California↗

USGS2002

Polar Bears

Polar bears ( Ursus maritimus ) are hunted throughout most of their range. In addition to hunting polar bears of the Beaufort Sea region are exposed to mineral and petroleum extraction and related human activities such as shipping road-building, and seismic testing (Stirling 1990). Little was known at the start of this project about how polar bears move about in their environment, and although it was understood that many bears travel across political borders, the boundaries of populations had not been delineated (Amstrup 1986, Amstrup et al. 1986, Amstrup and DeMaster 1988, Garner et al. 1994, Amstrup 1995, Amstrup et al. 1995, Amstrup 2000). As human populations increase and demands for polar bears and other arctic resources escalate, managers must know the sizes and distributions of the polar bear populations. Resource managers also need reliable estimates of breeding rates, reproductive intervals, litter sizes, and survival of young and adults. Our objectives for this research were 1) to determine the seasonal and annual movements of polar bears in the Beaufort Sea, 2) to define the boundaries of the population(s) using this region, 3) to determine the size and status of the Beaufort Sea polar bear population, and 4) to establish reproduction and survival rates (Amstrup 2000).

Alaska, Northwest Territories, Yukon Territory↗

USGS2017

Vanadium

Vanadium is used primarily in the production of steel alloys; as a catalyst for the chemical industry; in the making of ceramics, glasses, and pigments; and in vanadium redox-flow batteries (VRBs) for large-scale storage of electricity. World vanadium resources in 2012 were estimated to be 63 million metric tons, which include about 14 million metric tons of reserves. The majority of the vanadium produced in 2012 was from China, Russia, and South Africa. Vanadium is extracted from several different types of mineral deposits and from fossil fuels. These deposits include vanadiferous titanomagnetite (VTM) deposits, sandstone-hosted vanadium (with or without uranium) deposits (SSV deposits), and vanadium-rich black shales. VTM deposits are the principal source of vanadium and consist of magmatic accumulations of ilmenite and magnetite containing 0.2 to 1 weight percent vanadium pentoxide (V 2 O 5 ). SSV deposits are another important source; these deposits have average ore grades that range from 0.1 to greater than 1 weight percent V 2 O 5 . The United States has been and is currently the main producer of vanadium from SSV deposits, particularly those on the Colorado Plateau. Vanadium-rich black shales occur in marine successions that were deposited in epeiric (inland) seas and on continental margins. Concentrations in these shales regularly exceed 0.18 weight percent V 2 O 5 and can be as high as 1.7 weight percent V 2 O 5 . Small amounts of vanadium have been produced from the Alum Shale in Sweden and from ferrophosphorus slag generated during the reduction of phosphate to elemental phosphorus in ore from shales of the Phosphoria Formation in Idaho and Wyoming. Because vanadium enrichment occurs in beds that are typically only a few meters thick, most of the vanadiferous black shales are not currently economic, although they may become an important resource in the future. Significant amounts of vanadium are recovered as byproducts of petroleum refining, and processing of coal, tar sands, and oil shales may be important future sources. Vanadium occurs in one of four oxidation states in nature: +2, +3, +4, and +5. The V 3+ ion has an octahedral radius that is almost identical to that of (Fe 3+ ) and (Al 3+ ) and, therefore, it substitutes in ferromagnesian minerals. During weathering, much of the vanadium may partition into newly formed clay minerals, and it either remains in the +3 valence state or oxidizes to the +4 valence state, both of which are relatively insoluble. If erosion is insignificant but chemical leaching is intense, the residual material may be enriched in vanadium, as are some bauxites and laterites. During the weathering of igneous, residual, or sedimentary rocks, some vanadium oxidizes to the +5 valence state, especially in the intensive oxidizing conditions that are characteristic of arid climates. The average contents of vanadium in the environment are as follows: soils [10 to 500 parts per million (ppm)]; streams and rivers [0.2 to 2.9 parts per billion (ppb)]; and coastal seawater (0.3 to 2.8 ppb). Concentrations of vanadium in soils (548 to 7,160 ppm) collected near vanadium mines in China, the Czech Republic, and South Africa are many times greater than natural concentrations in soils. Additionally, if deposits contain sulfide minerals such as chalcocite, pyrite, and sphalerite, high levels of acidity may be present if sulfide dissolution is not balanced by the presence of acid-neutralizing carbonate minerals. Some of the vanadium-bearing deposit types, particularly some SSV and black-shale deposits, contain appreciable amounts of carbonate minerals, which lowers the acid-generation potential. Vanadium is a micronutrient with a postulated requirement for humans of less than 10 micrograms per day, which can be met through dietary intake. Primary and secondary drinking water regulations for vanadium are not currently in place in the United States. Vanadium toxicity is thought to result from an intake of more than 10 to 20 milligrams per day. Vanadium is essential for some biological processes and organisms. For example, some nitrogen-fixing bacteria require vanadium for producing enzymes necessary to convert nitrogen from the atmosphere into ammonia, which is a more biologically accessible form of nitrogen.

Professional Paper↗

USGS2020

Correlations along a 140 km transect in the westernmost Peach Spring Tuff, and tracing changing facies through depositional environments

Tephrochronology is the correlation of tephra beds and tuffs by various means, and it is an important tool in refining stratigraphic and structural interpretations. The 18.78 Ma Peach Spring Tuff (PST) is a large-volume ignimbrite that was deposited across a ~200 km x 360 km area of southeastern California, northwestern Arizona, and southern Nevada. The PST is a valuable stratigraphic marker in several stratigraphic sequences in this area. In this study, the field characteristics, mineral abundance, and feldspar composition of eight ignimbrite locations are examined along a 140 km swath across the northwestern extent of the PST in the Mojave Desert. Based on geochronologic or paleomagnetic data, five of the ignimbrites are PST, and three are possible PST ignimbrites do not have supporting geochronologic or paleomagnetic data. In 53 regionally dispersed locations of the PST, including the three possible PST ignimbrites in this study, the overlying and underlying sedimentary deposits are described in order to determine the depositional changes, if any, resulting from the geologically instantaneous deposition of the ignimbrite. Of the 53 locations, 37 locations allow interpretation of the pre- and post-PST depositional environments. Of the 37, 25 have an upward fining-thinning trend indicating that the deposition of the ignimbrite resulted in (1) disruption and change in local stream gradients and sediment supply, (2) a long period of time for depositional systems to propagate to and regenerate at a location, or (3) a lack of re-establishment of the pre-PST environments. However, 12 have no significant change, so there was minimal disruption to the depositional system.

Arizona, California, Nevada↗