SEARCH · Search USGS

Results for “Information and Technology Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

USGS1996

Using a geographic information system and scanning technology to create high-resolution land-use data sets

A geographic information system (GIS) procedure was developed to compile low-altitude aerial photography, digitized data, and land-use data from U.S. Department of Agriculture Consolidated Farm Service Agency (CFSA) offices into a high-resolution (approximately 5 meters) land-use GIS data set. The aerial photography consisted of 35-mm slides which were scanned into tagged information file format (TIFF) images. These TIFF images were then imported into the GIS where they were registered into a geographically referenced coordinate system. Boundaries between land use were delineated from these GIS data sets using on-screen digitizing techniques. Crop types were determined using information obtained from the U.S. Department of Agriculture CFSA offices. Crop information not supplied by the CFSA was attributed by manual classification procedures. Automated methods to provide delineation of the field boundaries and land-use classification were investigated. It was determined that using these data sources, automated methods were less efficient and accurate than manual methods of delineating field boundaries and classifying land use.

Water-Resources Investigations Report↗

USGS2022

Can non-invasive methods replace radiocollar-based winter counts in a 50-year wolf study? Lessons learned from a three-winter trial

Context: Monitoring low-density, elusive predators such as grey wolves ( Canis lupus ) has often been undertaken via live-capture and radio-collaring. Recent advances in non-invasive methods suggest live-captures may not be necessary for adequate monitoring. Further, non-invasive methods are considered best practice when possible. Aims: I evaluated whether a suite of non-invasive methods could replace aerial radiotelemetry to census resident pack wolves. Methods: I employed aerial snow-tracking, ground snow-tracking, camera-trapping, non-invasive genetic surveys, and community-scientist reports during three winters (2019–2021) in north-eastern Minnesota, USA to census pack wolves in a 2060 km 2 area. I attempted to enumerate individual pack sizes as has been historically undertaken to compile the census. Traditional aerial radiotelemetry methods were also conducted for comparison. Key results: Ground snow-tracking and camera-trapping provided the most similar information to radiotelemetry for determining pack counts and territory information, and, in some cases, documented higher pack counts than those obtained by aerial radiotelemetry. Radiotelemetry was the best method for determining pack territories, but was limited to radioed packs. A staggered application of both approaches resulted in increased precision and additional pack-level information without greatly increasing overall field effort. Non-invasive methods allowed trapping for radio-collaring to be reduced to every other year (a 50% reduction), but depending on trapping success, survival of animals, and radio-collar battery life, might even be reduced to every third year. Conclusions: In this 3-year trial, non-invasive methods were not sufficient to completely replace radio-collaring. Nevertheless, non-invasive methods allowed for a 50% reduction in trapping, increased the annual wolf-count precision, and increased community involvement. Anticipated technological improvements in non-invasive methods should reduce some issues encountered – but others will likely persist, in part, because of the fundamental nature of non-invasive methods. Implications: Less reliance on captures, enhanced pack information, and increased public involvement are all successful outcomes of this 3-year trial of non-invasive methods for monitoring wolf populations. Non-invasive methods continue to broaden and improve technologically, and information from trials such as this will help guide others as they increasingly implement non-invasive methods as partial or complete replacements for traditional capture-based methods.

Wildlife Research↗

USGS1979

Summary appraisals of the nation's ground-water resources – Lower Mississippi region

The Lower Mississippi Region comprises an area of 102,400 square miles (265,200 square kilometers). Almost all this area is in the physiographic province known as the Gulf Coastal Plain. Three small areas on the northwest boundary of the region are in the Interior Highlands. The Lower Mississippi Region has an abundance of ground water. The geologic structure in that part of the region within the Coastal Plain is an elongated trough which has been filled with permeable materials, resulting in vast subsurface reservoirs. Except in local areas where continued large withdrawals have caused significant water-level declines, these reservoirs are full. Recharge to the region's aquifers is primarily from rainfall. Annual rainfall in most of the region is well distributed throughout the year and is sufficient to satisfy evapotranspiration requirements and still provide recharge to the aquifers. An estimated 844 billion cubic feet (24 billion cubic meters) of fresh ground water is available for withdrawal annually in the region. Only about one-third of this quantity is being utilized. Therefore, on this basis alone, the region still has much potential for ground-water development. The Coastal Plain aquifers within the Lower Mississippi Region contain large reserves of saltwater in the downdip limits of the aquifers. The quantity of saltwater in the region is several times that of freshwater. As desalinization techniques are developed and as more uses are found for saltwater, this reserve could become an important source of water for the region. At present (1976), the most productive and potentially productive aquifers or aquifer systems in the region are the Mississippi River valley alluvial aquifer of Quaternary age and the Sparta Sand and the Memphis aquifer (Memphis Sand in Tennessee) of Tertiary age. The Sparta Sand and the Memphis aquifer are heavily utilized and have shown significant water-level declines. However, selected well hydrographs indicate that water levels may be stabilizing under present pumping conditions. The Mississippi River valley alluvial aquifer is the most extensive high-yielding aquifer in the region; yields of several thousand gallons per minute may be obtained at depths of less than 200 feet (61 meters). To obtain maximum benefit from the vast quantities of ground water in the region, adequate attention must be given to the effects of proposed development upon the ground-water regime. Knowledge of the geologic structure and hydraulic properties of the aquifer systems is essential to an evaluation of the effects of such development. Some studies have been made in sufficient detail to provide this knowledge, but additional studies are needed. Activities that could cause significant changes in the groundwater regime should be undertaken only after all available information has been considered. Failure to seek out and use such information may result in inefficient development of the groundwater resource and, in some instances, degradation of the quality of the resource. Some changes always result from ground-water development. The possible changes can be grouped into three categories: hydraulic, water quality, and those affecting the physical framework of the aquifers. Generally, they are small in magnitude and areal extent. Because these changes occur below the ground surface, they are unknown to the ground-water user unless they noticeably affect the quantity or quality of water produced or cause obvious physical effects, such as land subsidence. Great advances have been made in hydrologic technology in recent years. Predictive models have been developed that make it possible for the hydroiogist to simulate aquifer responses to proposed development or other stresses. These models would be invaluable tools in progressive water-resources planning and management.

Arkansas, Kentucky, Louisiana, Mississippi, Missou↗

USGS2021

Untargeted lipidomics for determining cellular and sub-cellular responses in Zebrafish (Danio rerio) liver cells following exposure to complex mixtures in U.S. streams

Surface waters often contain a variety of chemical contaminants potentially capable of producing adverse outcomes in both humans and wildlife due to impacts from industrial, urban, and agricultural activity. Here, we report the results of a zebrafish liver (ZFL) cell-based lipidomics approach to assess the potential ecotoxicological effects of complex contaminant mixtures using water collected from eight impacted streams across the United States mainland and Puerto Rico. We initially characterized the ZFL lipidome using high resolution mass spectrometry, resulting in the annotation of 508 lipid species covering 27 classes. We then identified lipid changes induced by all streamwater samples (nonspecific stress indicators) as well as those unique to water samples taken from specific streams. Subcellular impacts were classified based on organelle-specific lipid changes, including increased lipid saturation (endoplasmic reticulum stress), elevated bis(monoacylglycero)phosphate (lysosomal overload), decreased ubiquinone (mitochondrial dysfunction), and elevated ether lipids (peroxisomal stress). Finally, we demonstrate how these results can uniquely inform environmental monitoring and risk assessments of surface waters.

Environmental Science & Technology↗

USGS2020

Envisioning a multi-agency and multi-academic institution geomorphology data exchange portal

Access to bathymetry and geomorphology data for rivers and reservoirs is a critical need in multiple agencies and academia. These data are needed to make water-resource-management decisions regarding river restoration, resource protection, infrastructure design and sustainability, and flood-risk reduction, and during natural disasters. Sharing of data increases decision-making capacity by incorporating information from entire watersheds, provides knowledge from similar settings being managed or studied by other entities, and helps meet the goals of the Federal Open Water Data Initiative. Addressing these needs across broad spatial and temporal scales would be made more efficient if these data were available in consistent formats with standardized metadata and were either stored in a centralized database or integrated with existing geospatial datasets. Because of renewed interest and technological advances, representatives from multiple Federal agencies and academic institutions have created a new working group to scope the development of a Geomorphology Data Exchange Portal to increase access to needed data. The working group has developed a vision for the Portal and outlined possible approaches to achieve the vision. Short-term approaches may include leveraging existing data-access portals and data-processing tools and integrating geomorphology data with existing national geospatial datasets.

Open-File Report↗

USGS2019

Capacity and area of Grand Lake O’ the Cherokees, northeastern Oklahoma, 2009

In February 2017, the Grand River Dam Authority filed to relicense the Pensacola Hydroelectric Project with the Federal Energy Regulatory Commission. The predominant feature of the Pensacola Hydroelectric Project is Pensacola Dam, which impounds Grand Lake O’ the Cherokees (locally called Grand Lake) in northeastern Oklahoma. Identification of information gaps and assessment of project effects on stakeholders are central aspects of the Federal Energy Regulatory Commission relicensing process. Due to the natural changes to the reservoir over time, new capacity and area tables are needed periodically. The most recent complete capacity and area table was produced in 1940. Capacity and area tables identify the relations between the elevation of the water surface and the volume of water that can be impounded at each water surface elevation. This report (1) presents an updated capacity and area table for Grand Lake O’ the Cherokees for 2009, (2) describes the methods used to calculate the updated capacity and area values presented in the table, and (3) compares the updated capacity table to historical capacity tables produced from a survey in 1940 and from a hydrographic survey of the lake by the Oklahoma Water Resources Board in 2009. The new capacity values computed for Grand Lake O’ the Cherokees indicate that capacity at conservation pool elevation has decreased about 157,000 acre-feet or 10 percent since 1940 and capacity at top of dam elevation has decreased about 200,000 acre-feet or 8 percent since 1940. This difference in the capacities could be attributed to the advancements of technologies; the techniques used for surveying lakes have changed from the 1940 survey to the 2009 survey. Another possible reason for loss in capacity could be as time progresses, lakes like Grand Lake O’ the Cherokees slowly impound sediment carried by the rivers that feed into the lakes, thus diminishing the amount of water that the lake holds. The most recent survey used measured water depths and Global Position System collected electronically, but the methods used to collect data in 1940 are unknown. Due to the advancement of technology, the 2009 survey is likely more precise than the 1940 survey.

Oklahoma↗

USGS2005

The life cycle of a mineral deposit: a teacher's guide for hands-on mineral education activities

This teacher's guide defines what a mineral deposit is and how a mineral deposit is identified and measured, how the mineral resources are extracted, and how the mining site is reclaimed; how minerals and mineral resources are processed; and how we use mineral resources in our every day lives. Included are 10 activitybased learning exercises that educate students on basic geologic concepts; the processes of finding, identifying, and extracting the resources from a mineral deposit; and the uses of minerals. The guide is intended for K through 12 Earth science teachers and students and is designed to meet the National Science Content Standards as defined by the National Research Council (1996). To assist in the understanding of some of the geology and mineral terms, see the Glossary (appendix 1) and Minerals and Their Uses (appendix 2). The process of finding or exploring for a mineral deposit, extracting or mining the resource, recovering the resource, also known as beneficiation, and reclaiming the land mined can be described as the “life cycle” of a mineral deposit. The complete process is time consuming and expensive, requiring the use of modern technology and equipment, and may take many years to complete. Sometimes one entity or company completes the entire process from discovery to reclamation, but often it requires multiple groups with specialized experience working together. Mineral deposits are the source of many important commodities, such as copper and gold, used by our society, but it is important to realize that mineral deposits are a nonrenewable resource. Once mined, they are exhausted, and another source must be found. New mineral deposits are being continuously created by the Earth but may take millions of years to form. Mineral deposits differ from renewable resources, such as agricultural and timber products, which may be replenished within a few months to several years.

General Information Product↗

USGS2016

A world of minerals in your mobile device

Mobile phones and other high-technology communications devices could not exist without mineral commodities. More than one-half of all components in a mobile device—including its electronics, display, battery, speakers, and more—are made from mined and semiprocessed materials (mineral commodities). Some mineral commodities can be recovered as byproducts during the production and processing of other commodities. As an example, bauxite is mined for its aluminum content, but gallium is recovered during the aluminum production process. The images show the ore minerals (sources) of some mineral commodities that are used to make components of a mobile device. On the reverse side, the map and table depict the major source countries producing these mineral commodities along with how these commodities are used in mobile devices. For more information on minerals, visit http://minerals.usgs.gov .

General Information Product↗

USGS2016

U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative—2015 annual report

This is the eighth annual report highlighting U.S. Geological Survey (USGS) science and decision-support activities conducted for the Wyoming Landscape Conservation Initiative (WLCI). The activities address specific management needs identified by WLCI partner agencies. In 2015, USGS scientists continued 24 WLCI projects in 5 categories: (1) acquiring and analyzing resource-condition data to form a foundation for understanding and monitoring landscape conditions and projecting changes; (2) using new technologies to improve the scope and accuracy of landscape-scale monitoring and assessments, and applying them to monitor indicators of ecosystem conditions and the effectiveness of on-the-ground habitat projects; (3) conducting research to elucidate the mechanisms that drive wildlife and habitat responses to changing land uses; (4) managing and making accessible the large number of databases, maps, and other products being developed; and (5) coordinating efforts among WLCI partners, helping them to use USGS-developed decision-support tools, and integrating WLCI outcomes with future habitat enhancement and research projects. Of the 24 projects, 21 were ongoing, including those that entered new phases or more in-depth lines of inquiry, 2 were new, and 1 was completed. A highlight of 2015 was the WLCI science conference sponsored by the USGS, Bureau of Land Management, and National Park Service in coordination with the Wyoming chapter of The Wildlife Society. Of 260 participants, 41 were USGS professionals representing 13 USGS science centers, field offices, and Cooperative Wildlife Research Units. Major themes of USGS presentations included using new technologies for developing more efficient research protocols for modeling and monitoring natural resources, researching effects of energy development and other land uses on wildlife species and habitats of concern, and modeling species distributions, population trends, habitat use, and effects of land-use changes. There was also a special session on the effectiveness of Wyoming’s Sage-Grouse Executive Order. Combined, USGS presentations provided WLCI partners with a wealth of information and conservation tools. The project completed in 2015 yielded an index of important agricultural lands in the WLCI region. The index improves upon existing measures of agricultural productivity and provides planners and managers with additional values to consider when making decisions about land use and conservation actions. The two new projects include an analysis of satellite imagery to quantify sagebrush productivity and mortality, and an evaluation of how groundwater and small streams interact in the upper Green River Basin. Initiated in response to concern among WLCI partners that large areas of sagebrush appear to have died recently, the sagebrush study objectives are to assess effects of these mortality events on overall sagebrush ecosystem productivity, evaluate the feasibility of using satellite imagery to detect patterns in sagebrush mortality over time, and identify factors driving these mortality events. The groundwater-streamflow interaction study is being conducted by hydrologists and fish ecologists to better understand how groundwater-streamflow interactions are affected by energy-resource development and how native fish communities are affected by these factors. Expected outcomes of both new projects will provide WLCI partners with additional information and decision-support tools. Highlights of ongoing science foundation activities included simulations of nine alternative build-out scenarios for oil and gas development and an associated online fact sheet that explains how the simulations were conducted, with an applied example for the Atlantic Rim. Also completed in 2015 was an update of the USGS online inventory of mineral resources data, and publication of a USGS uranium resource survey for the WLCI region. Combined, the outcomes of this work provide decisionmakers and managers with important baseline information for existing and (or) future planning and monitoring efforts. Terrestrial monitoring activities in 2015 emphasized the use of satellite data in combination with other technologies and field data to monitor, assess, and (or) forecast distribution patterns and (or) trends in sagebrush ecosystems, seasonal and migration stopover habitats used by mule deer and elk, and semi-arid aspen woodlands. Several professional papers detailing new monitoring models and results have been published. Combined, this and related work will help managers understand distribution patterns and trends among priority habitats, identify areas in need of restoration or conservation, and monitor the effectiveness of habitat-management actions. Aquatic monitoring activities entailed not only the new groundwater-streamflow interaction study already mentioned, but also continued monitoring with streamgages paired with nearby wells in the Green River Basin to assess groundwater effects on streamflow and surface water temperatures. A map that portrays groundwater levels and general direction of flow in the Green River Basin was published as well . Overall, outcomes of USGS hydrological research and monitoring will inform WLCI partners about water resources in the WLCI region and help to explain fish-community responses to energy-resource development. In 2015, USGS terrestrial wildlife ecologists continued to make crucial strides towards better understanding wildlife species responses to energy-resource development and other land-use changes. This body of research includes six taxa that require or heavily depend on sagebrush habitats: sage-grouse, pygmy rabbits, 3 songbird species, and mule deer. Native fish communities are also being evaluated. Approaches include modeling and mapping wildlife species distributions, abundances, and trends; using satellite and other technologies to track wildlife seasonal movements; conducting successive phases of research that build on the knowledge gained through prior phases to reveal the specific factors or thresholds that drive population- or individual-level responses to changes; and conducting population viability analyses. Additionally, wildlife habitat association models for pygmy rabbit and sage-grouse were combined with the oil and gas build-out scenarios to project species responses to alternative energy development scenarios. Outcomes of the wildlife response research are helping decisionmakers and managers identify specific factors that contribute to species population trends, the potential for spatial overlap between important wildlife habitats and proposed energy-resource development, locations of priority habitats for restoration and conservation, and more. Data and WLCI Web site management highlights of 2015 included not only ongoing software upgrades, but also an update of the datasets displayed in two of the online products developed for the WLCI effort: (1) a map of 15,532 oil and natural gas well pad scars and other features associated with oil and gas extraction, and (2) a map of oil and gas, oil shale, uranium, and solar energy production, both for southwestern Wyoming. In addition, a map viewer was developed for a previously published map of coal and wind production in relation to sage-grouse distribution and core management areas in southwestern Wyoming. Combined, these maps place valuable decision-support tools in the hands of WLCI partners. The USGS coordination efforts on behalf of the WLCI in 2015 included significant work on planning and executing the WLCI science conference. They also included ongoing efforts to support Local Project Development Teams and the WLCI Coordination Team (CT) with developing conservation priorities and strategies, identifying priority areas for future conservation actions, supporting the evaluation and ranking of conservation projects, and evaluating the ways in which proposed habitat projects relate to WLCI priorities. In 2015, the USGS also assisted the WLCI CT with updating the WLCI Conservation Action Plan.

Wyoming↗

USGS2025

Rebuilding a volcano one lava flow at a time—Visualizing the lava dome-building eruption in the crater of Mount St. Helens, 1982–1986

Between 1980 and 1986, the U.S. Geological Survey made a series of 1:2,000-scale topographic contour maps from aerial photographic surveys to monitor the eruption. These maps were made for operational purposes and were not intended for publication. Since then, advances in technology made it possible to digitize the original, highly detailed hardcopy maps and derive new digital data elevation models of the surface of the lava dome. These digital elevation models allow for the visualization of the progression of the eruption and reveal the rubbly, chaotic surface of the lava flows and dome. Additionally, these new data help fill gaps in the long-term record of topographic changes that have occurred at the volcano since the May 18, 1980, eruption.

Washington↗

USGS2002

Near-real-time simulation and internet-based delivery of forecast-flood inundation maps using two-dimensional hydraulic modeling--A pilot study for the Snoqualmie River, Washington

A system of numerical hydraulic modeling, geographic information system processing, and Internet map serving, supported by new data sources and application automation, was developed that generates inundation maps for forecast floods in near real time and makes them available through the Internet. Forecasts for flooding are generated by the National Weather Service (NWS) River Forecast Center (RFC); these forecasts are retrieved automatically by the system and prepared for input to a hydraulic model. The model, TrimR2D, is a new, robust, two-dimensional model capable of simulating wide varieties of discharge hydrographs and relatively long stream reaches. TrimR2D was calibrated for a 28-kilometer reach of the Snoqualmie River in Washington State, and is used to estimate flood extent, depth, arrival time, and peak time for the RFC forecast. The results of the model are processed automatically by a Geographic Information System (GIS) into maps of flood extent, depth, and arrival and peak times. These maps subsequently are processed into formats acceptable by an Internet map server (IMS). The IMS application is a user-friendly interface to access the maps over the Internet; it allows users to select what information they wish to see presented and allows the authors to define scale-dependent availability of map layers and their symbology (appearance of map features). For example, the IMS presents a background of a digital USGS 1:100,000-scale quadrangle at smaller scales, and automatically switches to an ortho-rectified aerial photograph (a digital photograph that has camera angle and tilt distortions removed) at larger scales so viewers can see ground features that help them identify their area of interest more effectively. For the user, the option exists to select either background at any scale. Similar options are provided for both the map creator and the viewer for the various flood maps. This combination of a robust model, emerging IMS software, and application interface programming should allow the technology developed in the pilot study to be applied to other river systems where NWS forecasts are provided routinely.

Water-Resources Investigations Report↗

USGS2009

Geographic information systems, remote sensing, and spatial analysis activities in Texas, 2008-09

Geographic information system (GIS) technology has become an important tool for scientific investigation, resource management, and environmental planning. A GIS is a computer-aided system capable of collecting, storing, analyzing, and displaying spatially referenced digital data. GIS technology is useful for analyzing a wide variety of spatial data. Remote sensing involves collecting remotely sensed data, such as satellite imagery, aerial photography, or radar images, and analyzing the data to gather information or investigate trends about the environment or the Earth's surface. Spatial analysis combines remotely sensed, thematic, statistical, quantitative, and geographical data through overlay, modeling, and other analytical techniques to investigate specific research questions. It is the combination of data formats and analysis techniques that has made GIS an essential tool in scientific investigations. This fact sheet presents information about the technical capabilities and project activities of the U.S. Geological Survey (USGS) Texas Water Science Center (TWSC) GIS Workgroup during 2008 and 2009. After a summary of GIS Workgroup capabilities, brief descriptions of activities by project at the local and national levels are presented. Projects are grouped by the fiscal year (October-September 2008 or 2009) the project ends and include overviews, project images, and Internet links to additional project information and related publications or articles.

Fact Sheet↗

USGS2021

Critical review of mercury methylation and methylmercury demethylation rate constants in aquatic sediments for biogeochemical modeling

Mercury is a toxin that causes neurological impairments in adults, is particularly harmful for fetuses and children, and is deadly in severe cases, making it a worldwide health concern. Methylmercury (MeHg) is the environmentally relevant form of mercury (Hg) because it biomagnifies along the food chain. Methylmercury is mainly produced in aquatic sediments via methylation of inorganic Hg (Hg(II)) and transformed back via demethylation. Because transformation rates determine MeHg concentrations, quantification of methylation and demethylation rates is needed to inform management of MeHg. Published rate constants for Hg(II) methylation ( 𝑘 𝑚 ) and MeHg demethylation ( 𝑘 𝑑 ) vary greatly, stemming partly from differences in experimental methods. We conducted a comprehensive review of rate laws, evaluated published rate constants, and performed biogeochemical simulations to assess variability in reported 𝑘 𝑚 and 𝑘 𝑑 . Based on selected studies employing the same pseudo-first-order rate law and similar experimental methods, we found that 𝑘 𝑚 = 0.04 ± 0.03 d −1 is a reasonable range for wetland sediments. Over a number of environments, maximum 𝑘 𝑑 was smaller at sites without Hg source ( 𝑘 𝑑 = 0.5 d −1 ) than at sites with identified Hg source ( 𝑘 𝑑 = 1.8 d −1 ). Larger variability and higher uncertainty in 𝑘 𝑑 compared to 𝑘 𝑚 highlight the need for more research on MeHg demethylation rates. This critical review: (a) aids the design of future experimental studies of 𝑘 𝑚 and 𝑘 𝑑 ; (b) provides guidance for comparing rate constants from different studies; (c) presents a biogeochemical reaction model to assess rate constants; and (d) informs selection of 𝑘 𝑚 and 𝑘 𝑑 values from the literature for use in model simulations.

Critical Reviews in Environmental Science and Tech↗

USGS2019

Reach-scale monitoring and modeling of rivers--Expanding hydraulic data collection beyond the cross section

For over 125 years, the U.S. Geological Survey streamgage network has provided important hydrologic information about rivers and streams throughout the Nation. Traditional streamgage methods provide reliable stage and streamflow data but typically only monitor stage at a single location in a river and require frequent calibration streamflow measurements. Direct measurements are not always feasible, therefore improved sensors and methods are being deployed at gages to better document streamflow conditions between measurements. The technology and techniques of reach-scale monitoring allow the U.S. Geological Survey to collect more data across the full range of streamflow without requiring that a hydrographer be present. The U.S. Geological Survey Arizona Water Science Center’s reach-scale monitoring program will enhance the Arizona streamgage network with more accurate streamflow measurements and provide more extensive streamflow records and geomorphological datasets for our agency partners and the public. Reach-scale monitoring installations and techniques are applicable to streams of the western United States and likely throughout the Nation.

Arizona↗

USGS2013

Historical methane hydrate project review

In 1995, U.S. Geological Survey made the first systematic assessment of the volume of natural gas stored in the hydrate accumulations of the United States. That study, along with numerous other studies, has shown that the amount of gas stored as methane hydrates in the world greatly exceeds the volume of known conventional gas resources. However, gas hydrates represent both a scientific and technical challenge and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of gas hydrates in nature, (2) assessing the volume of natural gas stored within various gas hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural gas hydrates, and (5) analyzing the effects of methane hydrate on drilling safety. Methane hydrates are naturally occurring crystalline substances composed of water and gas, in which a solid water-‐lattice holds gas molecules in a cage-‐like structure. The gas and water becomes a solid under specific temperature and pressure conditions within the Earth, called the hydrate stability zone. Other factors that control the presence of methane hydrate in nature include the source of the gas included within the hydrates, the physical and chemical controls on the migration of gas with a sedimentary basin containing methane hydrates, the availability of the water also included in the hydrate structure, and the presence of a suitable host sediment or “reservoir”. The geologic controls on the occurrence of gas hydrates have become collectively known as the “methane hydrate petroleum system”, which has become the focus of numerous hydrate research programs. Recognizing the importance of methane hydrate research and the need for a coordinated effort, the U.S. Congress enacted Public Law 106-‐193, the Methane Hydrate Research and Development Act of 2000. This Act called for the Secretary of Energy to begin a methane hydrate research and development program in consultation with other U.S. federal agencies. At the same time a new methane hydrate research program had been launched in Japan by the Ministry of International Trade and Industry to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. Since this early start we have seen other countries including India, China, Canada, and the Republic of Korea establish large gas hydrate research and development programs. These national led efforts have also included the investment in a long list of important scientific research drilling expeditions and production test studies that have provided a wealth of information on the occurrence of methane hydrate in nature. The most notable expeditions and projects have including the following: -‐Ocean Drilling Program Leg 164 (1995) -‐Japan Nankai Trough Project (1999-‐2000) -‐Ocean Drilling Program Leg 204 (2004) -‐Japan Tokai-‐oki to Kumano-‐nada Project (2004) -‐Gulf of Mexico JIP Leg I (2005) -‐Integrated Ocean Drilling Program Expedition 311 (2005) -‐Malaysia Gumusut-‐Kakap Project (2006) -‐India NGHP Expedition 01 (2006) -‐China GMGS Expedition 01 (2007) -‐Republic of Korea UBGH Expedition 01 (2007) -‐Gulf of Mexico JIP Leg II (2009) -‐Republic of Korea UBGH Expedition 02 (2010) -‐MH-‐21 Nankai Trough Pre-‐Production Expedition (2012-‐2013) -‐Mallik Gas Hydrate Testing Projects (1998/2002/2007-‐2008) -‐Alaska Mount Elbert Stratigraphic Test Well (2007) -‐Alaska Iġnik Sikumi Methane Hydrate Production Test Well (2011-‐2012) Research coring and seismic programs carried out by the Ocean Drilling Program (ODP) and Integrated Ocean Drilling Program (IODP), starting with the ODP Leg 164 drilling of the Blake Ridge in the Atlantic Ocean in 1995, have also contributed greatly to our understanding of the geologic controls on the formation, occurrence, and stability of gas hydrates in marine environments. For the most part methane hydrate research expeditions carried out by the ODP and IODP provided the foundation for our scientific understanding of gas hydrates. The methane hydrate research efforts under ODP-‐IODP have mostly dealt with the assessment of the geologic controls on the occurrence of gas hydrate, with a specific goal to study the role methane hydrates may play in the global carbon cycle. Over the last 10 years, national led methane hydrate research programs, along with industry interest have led to the development and execution of major methane hydrate production field test programs. Two of the most important production field testing programs have been conducted at the Mallik site in the Mackenzie River Delta of Canada and in the Eileen methane hydrate accumulation on the North Slope of Alaska. Most recently we have also seen the completion of the world’s first marine methane hydrate production test in the Nankai Trough in the offshore of Japan. Industry interest in gas hydrates has also included important projects that have dealt with the assessment of geologic hazards associated with the presence of hydrates. The scientific drilling and associated coring, logging, and borehole monitoring technologies developed in the long list of methane hydrate related field studies are one of the most important developments and contributions associated with methane hydrate research and development activities. Methane hydrate drilling has been conducted from advanced scientific drilling platforms like the JOIDES Resolution and the D/V Chikyu, which feature highly advanced integrated core laboratories and borehole logging capabilities. Hydrate research drilling has also included the use of a wide array of industry, geotechnical and multi-‐service ships. All of which have been effectively used to collect invaluable geologic and engineering data on the occurrence of methane hydrates throughout the world. Technologies designed specifically for the collection and analysis of undisturbed methane hydrate samples have included the development of a host of pressure core systems and associated specialty laboratory apparatus. The study and use of both wireline conveyed and logging-‐while-‐drilling technologies have also contributed greatly to our understanding of the in-‐situ nature of hydrate-‐bearing sediments. Recent developments in borehole instrumentation specifically designed to monitor changes associated with hydrates in nature through time or to evaluate the response of hydrate accumulations to production have also contributed greatly to our understanding of the complex nature and evolution of methane hydrate systems. Our understanding of how methane hydrates occur and behave in nature is still growing and evolving – we do not yet know if methane hydrates can be economically produced, nor do we know fully the role of hydrates as an agent of climate change or as a geologic hazard. But it is known for certain that scientific drilling has contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information to advance our understanding of methane hydrates.

Report↗

USGS1992

Toward digital geologic map standards: a progress report

Establishing modern scientific and technical standards for geologic maps and their derivative map products is vital to both producers and users of such maps as we move into an age of digital cartography. Application of earth-science data in complex geographic information systems, acceleration of geologic map production, and reduction of population costs require that national standards be developed for digital geologic cartography and computer analysis. Since December 1988, under commission of the Chief Geologic of the U.S. Geological Survey and the mandate of the National Geologic Mapping Program (with added representation from the Association of American State Geologists), a committee has been designing a comprehensive set of scientific map standards. Three primary issues were: (1) selecting scientific symbology and its digital representation; (2) creating an appropriate digital coding system that characterizes geologic features with respect to their physical properties, stratigraphic and structural relations, spatial orientation, and interpreted mode of origin; and (3) developing mechanisms for reporting levels of certainty for descriptive as well as measured properties. Approximately 650 symbols for geoscience maps, including present usage of the U.S Geological Survey, state geological surveys, industry, and academia have been identified and tentatively adopted. A proposed coding system comprises four-character groupings of major and minor codes that can identify all attributes of a geologic feature. Such a coding system allows unique identification of as many as 105 geologic names and values on a given map. The new standard will track closely the latest developments of the Proposed Standard for Digital Cartographic Data soon to be submitted to the National Institute of Standards and Technology by the Federal Interagency Coordinating Committee on Digital Cartography. This standard will adhere generally to the accepted definitions and specifications for spatial data transfer. It will require separate specifications of digital cartographic quality relating to positional accuracy and ranges of measured and interpreted values such as geologic age and rock composition. Provisional digital geologic map standards will be published for trial implementation. After approximately two years, when comments on the proposed standards have been solicited and modifications made, formal adoption of the standards will be recommended. Widespread acceptance of the new standards will depend on their applicability to the broadest range of earth-science map products and their adaptability to changing cartographic technology.

Conference Paper↗

USGS2011

Report on the 2010 Chilean earthquake and tsunami response

In July 2010, in an effort to reduce future catastrophic natural disaster losses for California, the American Red Cross coordinated and sent a delegation of 20 multidisciplinary experts on earthquake response and recovery to Chile. The primary goal was to understand how the Chilean society and relevant organizations responded to the magnitude 8.8 Maule earthquake that struck the region on February 27, 2010, as well as how an application of these lessons could better prepare California communities, response partners and state emergency partners for a comparable situation. Similarities in building codes, socioeconomic conditions, and broad extent of the strong shaking make the Chilean earthquake a very close analog to the impact of future great earthquakes on California. To withstand and recover from natural and human-caused disasters, it is essential for citizens and communities to work together to anticipate threats, limit effects, and rapidly restore functionality after a crisis. The delegation was hosted by the Chilean Red Cross and received extensive briefings from both national and local Red Cross officials. During nine days in Chile, the delegation also met with officials at the national, regional, and local government levels. Technical briefings were received from the President’s Emergency Committee, emergency managers from ONEMI (comparable to FEMA), structural engineers, a seismologist, hospital administrators, firefighters, and the United Nations team in Chile. Cities visited include Santiago, Talca, Constitución, Concepción, Talcahuano, Tumbes, and Cauquenes. The American Red Cross Multidisciplinary Team consisted of subject matter experts, who carried out special investigations in five Teams on the (1) science and engineering findings, (2) medical services, (3) emergency services, (4) volunteer management, and (5) executive and management issues (see appendix A for a full list of participants and their titles and teams). While developing this delegation, it was clear that a multidisciplinary approach was required to properly analyze the emergency response, technical, and social components of this disaster. A diverse and knowledgeable delegation was necessary to analyze the Chilean response in a way that would be beneficial to preparedness in California, as well as improve mitigation efforts around the United States. By most standards, the Maule earthquake was a catastrophe for Chile. The economic losses totaled $30 billion USD or 17% of the GDP of the country. Twelve million people, or ¾ of the population of the country, were in areas that felt strong shaking. Yet only 521 fatalities have been confirmed, with 56 people still missing and presumed dead in the tsunami. The Science and Technology Team evaluated the impacts of the earthquake on built environment with implications for the United States. The fires following the earthquake were minimal in part because of the shutdown of the national electrical grid early in the shaking. Only five engineer-designed buildings were destroyed during the earthquake; however, over 350,000 housing units were destroyed. Chile has a law that holds building owners liable for the first 10 years of a building’s existence for any losses resulting from inadequate application of the building code during construction. This law was cited by many our team met with as a prime reason for the strong performance of the built environment. Overall, this earthquake demonstrated that strict building codes and standards could greatly reduce losses in even the largest earthquakes. In the immediate response to the earthquake and tsunami, first responders, emergency personnel, and search and rescue teams handled many challenges. Loss of communications was significant; many lives were lost and effective coordination to support life-sustaining efforts was gravely impacted due to a lack of inter- and intra-agency coordination. The Health and Medical Services Team sought to understand the medical disaster response strategies and operations of Chilean agencies, including perceived or actual failures in disaster preparation that impacted the medical disaster response; post-disaster health and medical interventions to save lives and limit suffering; and the lessons learned by public health and medical personnel as a result of their experiences. Despite devastating damage to the health care and civic infrastructure, the health care response to the Chilean earthquake appeared highly successful due to several factors. Like other first responders, the medical community had the ability and resourcefulness to respond without centralized control in the early response phase. The health care community maintained patient care under austere conditions, despite many obstacles that could have prevented such care. National and international resources were rapidly mobilized to support the medical response. The Emergency Services Team sought to collect information on all phases of emergency management (preparedness, mitigation, response, and recovery) and determine what worked well and what could be improved upon. The Chileans reported being surprised that they were not as ready for this event as they thought they were. The use of mass care sheltering was limited, given the scope of the disaster, because of the resiliency of the population. The impacts of the earthquake and the tsunami were quite different, as were the needs of urban and rural dwellers, necessitating different response activities. The Volunteer Services Team examined the challenges faced in mobilizing a large number of volunteers to assist in the aftermath of a disaster of this scale. One of the greatest challenges expressed was difficulty in communication; the need for redundancy in communication mechanisms was cited. The flexibility and ability to work autonomously by the frontline volunteers was a significant factor in effective response. It was also important for volunteer leadership to know the emergency plans. These plans need to be flexible, include alternative options, and be completed in conjunction with local officials and other volunteers. The Executive/Red Cross Management Team took a broad look at the impacts of the earthquake and the implications for California. Some of the most important preparation for the disaster came from relationships formed before the event. The communities with strong connections between different government services generally fared well. The initial response and resilience of individuals and communities was another important component. Communication system failures limited the ability of a central government to assist impacted communities, or to issue tsunami warnings. It also delayed the response since the government did not know (in some case for several days) the impact and needs of local governments. In general, plans for congregate care shelters existed but were little used as most people chose to stay at damaged homes or with relatives. Looting was a surprise to response officials as well as social scientists, but both public and private sector organizations, including NGOs (Non-Governmental Organizations), must consider security for damaged businesses as a priority in California’s multihazard planning. Class and ethnic divisions that become heightened during some cases of actual or perceived injustice may also emerge in natural disasters in California. Several factors contributed overall to the low casualty rate and rapid recovery. A major factor is the strong building code in Chile and its comprehensive enforcement. In particular, Chile has a law that holds building owners accountable for losses in a building they build for 10 years. A second factor was the limited number of fires after the earthquake. In the last few California earthquakes, 60% of the fires were started by electrical problems, so the rarity of fires may have been affected by the shut down of the electricity grid early in the earthquake. Third, in many areas, the local emergency response was very effective. The most effective regions had close coordination between emergency management, fire, and police and were empowered to respond without communication with the capital. The fourth factor was the overall high level of knowledge about earthquakes and tsunamis by much of the population that helped them respond more appropriately after the event.

Open-File Report↗

USGS2017

Spatial and temporal distribution of bull trout ( Salvelinus confluentus )-size fish near the floating surface collector in the North Fork Reservoir, Oregon, 2016

Acoustic cameras were used to assess the behavior and abundance of bull trout ( Salvelinus confluentus )-size fish at the entrance to the North Fork Reservoir juvenile fish floating surface collector (FSC). The purpose of the FSC is to collect downriver migrating juvenile salmonids at the North Fork Dam, and safely route them around the hydroelectric projects. The objective of the acoustic camera component of this study was to assess the behaviors of bull trout-size fish observed near the FSC, and to determine if the presence of bull trout-size fish influenced the collection or abundance of juvenile salmonids. Acoustic cameras were deployed near the surface and floor of the entrance to the FSC. The acoustic camera technology was an informative tool for assessing abundance and spatial and temporal behaviors of bull trout-size fish near the entrance of the FSC. Bull trout-size fish were regularly observed near the entrance, with greater abundances on the deep camera than on the shallow camera. Additionally, greater abundances were observed during the hours of sunlight than were observed during the night. Behavioral differences also were observed at the two depths, with surface fish traveling faster and straighter with more directed movement, and fish observed on the deep camera generally showing more milling behavior. Modeling potential predator-prey interactions and influences using collected passive integrated transponder (PIT) -tagged juvenile salmonids proved largely unpredictable, although these fish provided relevant timing and collection information. Overall, the results indicate that bull trout-size fish are present near the entrance of the FSC, concomitant with juvenile salmonids, and their abundances and behaviors indicate that they may be drawn to the entrance of the FSC because of the abundance of prey-sized fish.

Oregon↗