Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Surface Techniques”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources

Estimating recharge at Yucca Mountain, Nevada, USA: Comparison of methods

Obtaining values of net infiltration, groundwater travel time, and recharge is necessary at the Yucca Mountain site, Nevada, USA, in order to evaluate the expected performance of a potential repository as a containment system for high-level radioactive waste. However, the geologic complexities of this site, its low precipitation and net infiltration, with numerous mechanisms operating simultaneously to move water through the system, provide many challenges for the estimation of the spatial distribution of recharge. A variety of methods appropriate for arid environments has been applied, including water-balance techniques, calculations using Darcy's law in the unsaturated zone, a soil-physics method applied to neutron-hole water-content data, inverse modeling of thermal profiles in boreholes extending through the thick unsaturated zone, chloride mass balance, atmospheric radionuclides, and empirical approaches. These methods indicate that near-surface infiltration rates at Yucca Mountain are highly variable in time and space, with local (point) values ranging from zero to several hundred millimeters per year. Spatially distributed net-infiltration values average 5 mm/year, with the highest values approaching 20 mm/year near Yucca Crest. Site-scale recharge estimates range from less than 1 to about 12 mm/year. These results have been incorporated into a site-scale model that has been calibrated using these data sets that reflect infiltration processes acting on highly variable temporal and spatial scales. The modeling study predicts highly non-uniform recharge at the water table, distributed significantly differently from the non-uniform infiltration pattern at the surface.

Hydrogeology Journal↗

Inoculation and habitat amelioration efforts in biological soil crust recovery vary by desert and soil texture

As dryland degradation continues, it is increasingly important to understand how to effectively restore biocrust communities. Potential techniques include the addition of biocrust inoculum to accelerate biocrust recovery. Enhanced erosion typical of degraded environments creates a challenge for these approaches, due to loss by wind or water and burial by saltating particles. To retain and protect added inoculum, the inclusion of habitat‐amelioration techniques can improve recovery rates. This study tested three different types of inoculum (field‐collected, greenhouse‐cultivated, and laboratory‐cultivated biocrust) coupled with two treatments to augment soil stability and ameliorate habitat limitations: soil surface polyacrylamide additions and installation of straw barriers. This was done across two deserts (Great Basin and Chihuahuan) and separated into generally coarse‐ or finer‐textured soils in each desert, with results monitored for 3 years (2015, 2016, 2017). While the inoculum type, coupled with habitat ameliorations, occasionally enhanced biocrust growth across years and treatments, in other cases, it made no difference compared to natural recovery rates. Rather, the desert location and soil texture groupings were the most prominent factors in determining recovery trajectories. Recovery proportions were similar in the finer‐textured sites in both the Great Basin and the Chihuahuan deserts, while the coarser‐textured site in the Great Basin did show some recovery over time and the Chihuahuan coarser‐textured site did not. This study demonstrates the importance of understanding site potential and identifying key limitations to biocrust recovery for successful restoration projects.

New Mexico, Texas↗

Radon-222 concentrations in ground water and soil gas on Indian reservations in Wisconsin

The weighted average radon-222 concentration of indoor air in homes located on Wisconsin Indian Reservations is 5.8 picocuries per liter, which exceeds the U.S. Environmental Protection Agency action limit of 4 picocuries per liter. Ground water is the principle source of drinking water on Wisconsin Indian Reservations and generally accounts for about 5 percent of the total indoor air radon-222 concentrations found in homes. To determine the distribution of radon-222, ground water from 29 private and community Wisconsin Indian Reservation wells and soil gas at a depth of about 3 feet below land surface adjacent to the wells were sampled. Sites with wells were distributed among the 11 Wisconsin Indian Reservations so that each Reservation contained at least 2 sites. The remaining seven sites were divided among the Reservation by acreage held by each tribe. Ground-water samples were collected using a syringe technique after the wells had been purged sufficiently to reach chemical stability. Samples were then sent by overnight mail to the U.S. Geological Survey, National Water Quality Lab for analysis by liquid scintillation counting. Soil gas was collected in Lucas cells, using a small-diameter soil probe and peristaltic pump. The cells were then analyzed by Lucas cell alpha scintillation counting with a portable radon detector. The highest radon-222 concentrations in ground water and soil gas are from sites with wells finished in the crystalline bedrock aquifer. Radon-222 concentrations in 29 ground-water samples collected from the sand and gravel and sedimentary and crystalline bedrock aquifers range from 260 to 22,000 picocuries per liter with a median concentration of 560 picocuries per liter. Only 2 of the 29 ground-water samples have radon-222 concentrations less than the U.S. Environmental Protection Agency proposed standard of 300 picocuries per liter. The highest radon-222 concentrations were found in ground water from wells in Shawano, Menominee, Forest, and Marathon counties. Radon-222 concentrations in soil gas range from 130 to 7,810 picocuries per liter with a median concentration of 560 picocuries per liter. For sites with wells finished in the sand and gravel aquifer, the coefficient of determination (R2) of the regression of concentration of radon-222 in ground water as a function of well depth is 0.003 and the significance level is 0.32, which indicates that there is not a statistically significant relation between radon-222 concentrations in ground water and well depth. The coefficient of determination of the regression of radon-222 in ground water and soil gas is 0.19 and the root mean square error of the regression line is 271 picocuries per liter. Even though the significance level (0.036) indicates a statistical relation, the root mean square error of the regression is so large that the regression equation would not give reliable predictions. Because of an inadequate number of samples, similar statistical analyses could not be performed for sites with wells finished in the crystalline and sedimentary bedrock aquifers.

Wisconsin↗

Ground-penetrating radar: A tool for mapping reservoirs and lakes

Ground-penetrating radar was evaluated as a tool for mapping reservoir and lake bottoms and providing stage-storage information. An impulse radar was used on a 1.4-ha (3.5-acre) reservoir with 31 transects located 6.1 m (20 feet) apart. Depth of water and lateral extent of the lake bottom were accurately measured by ground-penetrating radar. A linear (positive) relationship existed between measured water depth and ground-penetrating radar-determined water depth (R 2 =0.989). Ground-penetrating radar data were used to create a contour map of the lake bottom. Relationships between water (contour) elevation and water surface area and volume were established. Ground-penetrating radar proved to be a useful tool for mapping lakes, detecting lake bottom variations, locating old stream channels, and determining water depths. The technology provides accurate, continuous profile data in a relatively short time compared to traditional surveying and depth-sounding techniques.

Journal of Soil and Water Conservation↗

Cooperative federal-state liming research on surface waters impacted by acidic deposition

In the eastern and north-central United States, lakes and streams with low acid neutralizing capacity are at risk from acidity. Resource management agencies are interested in developing mitigation strategies that protect or restore fisheries in these waters. Addition of limestone (calcium carbonate) to improve water quality and prevent episodic depressions of pH during precipitation events and spring runoff is one mitigation technique being used. The ecological changes that accompany such treatment of streams and lakes are being investigated in a cooperative program between the U.S. Fish and Wildlife Service and individual states. Streams in Massachusetts, West Virginia and Tennessee, and a lake in Minnesota are included in this 5-yr research program. Intensive monitoring during pre- and post-liming tracks a suite of physical, chemical and biological parameters that influence the re-establishment or maintenance of healthy fisheries. Supporting studies on liming being conducted at Adirondack lakes in New York focus on fisheries management. A model on the influence of liming on light attenuation and thermal stratification is also being developed. Management guidelines are to be generated from the program results.

Massachusetts, Minnesota, Tennessee, West Virginia↗

Estimation of land surface evapotranspiration with A satellite remote sensing procedure

There are various methods available for estimating magnitude and trends of evapotranspiration. Bowen ratio energy balance system and eddy correlation techniques offer powerful alternatives for measuring land surface evapotranspiration. In spite of the elegance, high accuracy, and theoretical attractions of these techniques for measuring evapotranspiration, their practical use over large areas can be limited due to the number of sites needed and the related expense. Application of evapotranspiration mapping from satellite measurements can overcome the limitations. The objective of this study was to utilize the METRIC TM (Mapping Evapotranspiration at High Resolution using Internalized Calibration) model in Great Plains environmental settings to understand water use in managed ecosystems on a regional scale. We investigated spatiotemporal distribution of a fraction of reference evapotranspiration (ETrF) using eight Landsat 5 images during the 2005 and 2006 growing season for path 29, row 32. The ETrF maps generated by METRIC TM allowed us to follow the magnitude and trend in ETrF for major land-use classes during the growing season. The ETrF was lower early in the growing season for agricultural crops and gradually increased as the normalized difference vegetation index of crops increased, thus presenting more surface area over which water could transpire toward the midseason. Comparison of predictions with Bowen ratio energy balance system measurements at Clay Center, NE, showed that METRIC TM performed well at the field scale for predicting evapotranspiration from a cornfield. If calibrated properly, the model could be a viable tool to estimate water use in managed ecosystems in subhumid climates at a large scale.

Great Plains Research↗

Hydrology and digital simulation of the regional aquifer system, eastern Snake River Plain, Idaho

The occurrence and movement of water in the regional aquifer system that underlies the eastern Snake River Plain, Idaho, de- pend on the transmissivity and storage capacity of rocks that compose the geologic framework and on the distribution and amount of recharge and discharge of water within that frame- work. On a regional scale, most water moves horizontally through interflow zones in Quaternary basalt of the Snake River Group. In recharge and discharge areas, water also moves vertically along joints and interfingering edges of basalt flows. Aquifer thickness is largely unknown, but geophysical studies suggest that locally the Quaternary basalt may exceed several thousand feet. Along the margins of the plain, sand and gravel several hundred feet thick transmit large volumes of water. Regional ground-water movement is generally from northeast to southwest, from areas of recharge to areas of discharge. Re- charge is from seepage of surface water used for irrigation, stream and canal losses, underflow from tributary drainage ba- sins, and infiltration of precipitation. Aquifer discharge is largely spring flow to the Snake River and water pumped for irrigation. Major springs are near American Falls Reservoir and along the Snake River from Milner Dam to King Hill. Regional ground-water flow was simulated with numerical models. Initially, a two-dimensional steady-state model that in- cluded a nonlinear, least-squares regression technique was used to estimate aquifer properties. Later, a three-dimensional steady- state and transient model was used to replace the two-dimen- sional model. Three-dimensional model results indicated that average total transmissivity ranged from about 0.05 to 120 feet squared per second and vertical leakance ranged from about 3 x 10 -10 to 5 x 10 -6 feet per second per foot of aquifer thickness. The three-dimensional transient model was used to compare measured and estimated long-term changes in ground-water dis- charge and water levels with simulated values. Initial head con- ditions used in transient simulations were derived from a steady-state solution of estimated preirrigation hydrologic condi- tions. Transient simulations were 5-year stress periods beginning in 1891 and ending in 1980. Recharge for each stress period from 1926 to 1980 was estimated from surface-water irrigation, pre- cipitation, and streamflow records. Recharge for stress periods from 1891 to 1925 was based on the average value for stress peri- ods from 1926 to 1980 and was indexed to estimated irrigated acreages. Average annual tributary drainage-basin underflow for stress periods from 1891 to 1910 was calculated by using basin- yield equations. Underflow for stress periods from 1911 to 1980 was varied by use of streamflow records. Transient simulations reasonably approximated measured changes in aquifer head and ground-water discharge that re- sulted from use of surface water for irrigation. Irrigation with surface water peaked in about 1950; subsequent increases in irri- gation have been supplied largely by ground water. The three- dimensional model simulated water-level declines and reduced ground-water discharge caused in part by increases in ground- water pumping. The transient model was used to simulate aquifer changes from 1981 to 2010 in response to three hypothetical development alternatives: (1) Continuation of 1980 hydrologic conditions, (2) increased pumpage, and (3) increased recharge. Simulation of continued 1980 hydrologic conditions for 30 years indicated that head declines of 2 to 8 feet might be expected in the central part of the plain. The magnitude of simulated head declines was con- sistent with head declines measured during the 1980 water year. Larger declines were calculated along model boundaries, but these changes may have resulted from underestimation of tribu- tary drainage-basin underflow and inadequate aquifer definition. Simulation of increased ground-water pumpage (an additional 2,400 cubic feet per second) for 30 years indicated head declines of 10 to 50 feet in the central part of the plain. These relatively large head declines were accompanied by increased simulated river leakage of 50 percent and decreased spring discharge of 20 percent. The effect of increased recharge (800 cubic feet per sec- ond) for 30 years was a rise in simulated heads of 0 to 5 feet in the central part of the plain.

Idaho;Oregon↗

Digital-model simulation of the glacial-outwash aquifer, Otter Creek-Dry Creek basin, Cortland County, New York

The city of Cortland, New York, and surrounding areas obtain water from the highly productive glacial-outwash aquifer underlying the Otter Creek-Dry Creek basin. Pumpage from the aquifer in 1976 was approximately 6.3 million gallons per day and is expected to increase as a result of population growth and urbanization. A digital ground-water model that uses a finite-difference approximation technique to solve partial differential equations of flow through a porous medium was used to simulate the movement of water within the aquifer. The model was calibrated to equilibrium conditions by comparing water levels measured in the aquifer in March 1976 with those computed by the model. Then, from the simulated water-level surface for March, a transient-condition run was made to simulate the surface as measured in September 1976. Computed water levels presented as contours are generally in close agreement with potentiometric-surface maps prepared from field measurements of March and September 1976.

New York↗

Remote sensing sensors and applications in environmental resources mapping and modeling

The history of remote sensing and development of different sensors for environmental and natural resources mapping and data acquisition is reviewed and reported. Application examples in urban studies, hydrological modeling such as land-cover and floodplain mapping, fractional vegetation cover and impervious surface area mapping, surface energy flux and micro-topography correlation studies is discussed. The review also discusses the use of remotely sensed-based rainfall and potential evapotranspiration for estimating crop water requirement satisfaction index and hence provides early warning information for growers. The review is not an exhaustive application of the remote sensing techniques rather a summary of some important applications in environmental studies and modeling.

Sensors↗

Integrated assessment of runoff from livestock farming operations: analytical chemistry, in vitro bioassays, and in vivo fish exposures

Animal waste from livestock farming operations can contain varying levels of natural and synthetic androgens and/or estrogens, which can contaminate surrounding waterways. In the present study, surface stream water was collected from 6 basins containing livestock farming operations. Aqueous concentrations of 12 hormones were determined via chemical analyses. Relative androgenic and estrogenic activity was measured using in vitro cell assays (MDA-kb2 and T47D-Kbluc assays, respectively). In parallel, 48-h static-renewal in vivo exposures were conducted to examine potential endocrine-disrupting effects in fathead minnows. Mature fish were exposed to surface water dilutions (0%, 25%, 50%, and 100%) and 10-ng/L of 17α-ethynylestradiol or 50-ng/L of 17β-trenbolone as positive controls. Hepatic expression of vitellogenin and estrogen receptor α mRNA, gonadal ex vivo testosterone and 17β-estradiol production, and plasma vitellogenin concentrations were examined. Potentially estrogenic and androgenic steroids were detected at low nanogram per liter concentrations. In vitro estrogenic activity was detected in all samples, whereas androgenic activity was detected in only 1 sample. In vivo exposures to the surface water had no significant dose-dependent effect on any of the biological endpoints, with the exception of increased male testosterone production in 1 exposure. The present study, which combines analytical chemistry measurements, in vitro bioassays, and in vivo fish exposures, highlights the integrated value and future use of a combination of techniques to obtain a comprehensive characterization of an environmental chemical mixture.

Arkansas, Iowa, Kentucky, New York, Wisconsin↗

Direct-current vertical electrical-resistivity soundings in the Lower Peninsula of Michigan

Ninety-three direct-current vertical electrical-resistivity soundings were conducted in the Lower Peninsula of Michigan from June through October 1987. These soundings were made to assist in mapping the depth to brine in areas where borehole resistivity logs and water-quality data are sparse or lacking. The Schlumberger array for placement of current and potential electrodes was used for each sounding. Vertical electrical-resistivity sounding field data, shifted and smoothed sounding data, and electric layers calculated using inverse modeling techniques are presented. Also included is a summary of the near-surface conditions and depths to conductors and resistors for each sounding location.

Michigan↗

Traveltime and reaeration characteristics for a reach of the Rio Grande, Albuquerque, New Mexico, October 1991

Traveltime characteristics were determined using stream-velocity data and tracer-dye data for a reach of the Rio Grande. Traveltimes determined by the stream-velocity method were virtually the same as those determined by the tracer-dye and tracer-gas technique. The mean velocity of the stream was 1.12 miles per hour at a flow of about 300 cubic feet per second. Reaeration characteristics were determined using a propane tracer gas and a tracer-dye (rhodamine WT). Reaeration coefficients were adjusted for water temperature and the effects of wind movement on the water surface. The peak method-adjusted reaeration-coefficient mean value for the reach was 7.0 per day and ranged from 4.6 to 8.3 per day. The area method-adjusted reaeration- coefficient mean value for the reach was 7.7 per day and ranged from 5.5 to 10.4 per day.

Water-Resources Investigations Report↗

The role of hydrates, competing chemical constituents, and surface composition on CLNO2 formation

Atomic chlorine (Cl • ) affects air quality and atmospheric oxidizing capacity. Nitryl chloride (ClNO 2 ) – a common Cl • source–forms when chloride-containing aerosols react with dinitrogen pentoxide (N 2 O 5 ). A recent study showed that saline lakebed (playa) dust is an inland source of particulate chloride (Cl – ) that generates high ClNO 2 . However, the underlying physiochemical factors responsible for observed yields are poorly understood. To elucidate these controlling factors, we utilized single particle and bulk techniques to determine the chemical composition and mineralogy of playa sediment and dust samples from the southwest United States. Single particle analysis shows trace highly hygroscopic magnesium and calcium Cl-containing minerals are present and likely facilitate ClNO 2 formation at low humidity. Single particle and mineralogical analysis detected playa sediment organic matter that hinders N 2 O 5 uptake as well as 10 Å-clay minerals (e.g., Illite) that compete with water and chloride for N 2 O 5 . Finally, we show that the composition of the aerosol surface, rather than the bulk, is critical in ClNO 2 formation. These findings underscore the importance of mixing state, competing reactions, and surface chemistry on N 2 O 5 uptake and ClNO 2 yield for playa dusts and, likely, other aerosol systems. Therefore, consideration of particle surface composition is necessary to improve ClNO 2 and air quality modeling.

Environmental Science Technology↗

Faulting and groundwater in a desert environment: constraining hydrogeology using time-domain electromagnetic data

Within the south-western Mojave Desert, the Joshua Basin Water District is considering applying imported water into infiltration ponds in the Joshua Tree groundwater sub-basin in an attempt to artificially recharge the underlying aquifer. Scarce subsurface hydrogeological data are available near the proposed recharge site; therefore, time-domain electromagnetic (TDEM) data were collected and analysed to characterize the subsurface. TDEM soundings were acquired to estimate the depth to water on either side of the Pinto Mountain Fault, a major east-west trending strike-slip fault that transects the proposed recharge site. While TDEM is a standard technique for groundwater investigations, special care must be taken when acquiring and interpreting TDEM data in a twodimensional (2D) faulted environment. A subset of the TDEM data consistent with a layered-earth interpretation was identified through a combination of three-dimensional (3D) forward modelling and diffusion time-distance estimates. Inverse modelling indicates an offset in water table elevation of nearly 40 m across the fault. These findings imply that the fault acts as a low-permeability barrier to groundwater flow in the vicinity of the proposed recharge site. Existing production wells on the south side of the fault, together with a thick unsaturated zone and permeable near-surface deposits, suggest the southern half of the study area is suitable for artificial recharge. These results illustrate the effectiveness of targeted TDEM in support of hydrological studies in a heavily faulted desert environment where data are scarce and the cost of obtaining these data by conventional drilling techniques is prohibitive.

Near Surface Geophysics↗

Analysis of water surface and flow distribution for the design flood at a proposed highway crossing of the Sabine River near Tatum, Texas

The hydraulic effects of the proposed Texas Highway 43 crossing of the Sabine River near Tatum, Texas, were determined on the basis of results from a two-dimensional finite-element surface-water-flow model. In planning the replacement crossing by the Texas State Department of Highways and Public Transportation, approximations of apportionment of flow among the openings and velocities within the openings were of concern. The model was used to simulate flow in the river floodplain system for the proposed design, an alternate design, and for the natural condition. The proposed bridge design by the State Department of Highways and Public Transportation consisted of a 320-foot main channel opening, four left overflow bridges with widths of 120, 320, 320, and 280 feet, and one right overflow opening with a width of 440 feet. The alternate design consisted of a 950-foot main channel opening, three left overflow bridges with widths of 320, 320, and 280 feet, and one right overflow opening with a width of 200 feet. Preliminary one-dimensional computations were used as an aid in establishing the boundary conditions for the two-dimensional analysis. The analysis evaluates the interaction of complex hydraulic characteristics of varied features found at many multiple-opening highway crossings. Valid applications of accepted standard one-dimensional techniques would not reveal some aspects of the overall hydraulics of the crossing. The simulation of the proposed design shows, among other things, which openings are the most productive per foot of bridge length. The results of the two-dimensional simulation of the proposed design indicate some differences in the apportionment of flow among the openings when compared to the one-dimensional proposed crossing computations. The alternate design results in computed water-surface altitudes which were slightly lower than those of the proposed design. The alternate design would require less modification to the existing embankment. Velocities computed within the openings and at the bridge abutments, using the two-dimensional model, were within the design specifications of the State Department of Highways and Public Transportation. The simulations of the proposed and alternate designs indicate a lateral component of the water-surface slope at the embankment. Redistribution of flow across the floodplain also is indicated in both simulations. Some of the differences in the response between the two designs are affected by geometric features of the floodplain other than the embankment-opening geometry.

Water-Resources Investigations Report↗

Analytical solutions for benchmarking cold regions subsurface water flow and energy transport models: one-dimensional soil thaw with conduction and advection

Numerous cold regions water flow and energy transport models have emerged in recent years. Dissimilarities often exist in their mathematical formulations and/or numerical solution techniques, but few analytical solutions exist for benchmarking flow and energy transport models that include pore water phase change. This paper presents a detailed derivation of the Lunardini solution, an approximate analytical solution for predicting soil thawing subject to conduction, advection, and phase change. Fifteen thawing scenarios are examined by considering differences in porosity, surface temperature, Darcy velocity, and initial temperature. The accuracy of the Lunardini solution is shown to be proportional to the Stefan number. The analytical solution results obtained for soil thawing scenarios with water flow and advection are compared to those obtained from the finite element model SUTRA. Three problems, two involving the Lunardini solution and one involving the classic Neumann solution, are recommended as standard benchmarks for future model development and testing.

Advances in Water Resources↗

Flood-plain delineation for Bull Run, Little Rocky Run, Johnny Moore Creek, and Popes Head Creek basins, Fairfax County, Virginia

Water-surface profiles of the 25-year and 100-year floods and maps on which the 25-, 50-, and 100-year flood boundaries are delineated for Little Rocky Run Basin, Johnny Moore Creek Basin, Popes Head Creek Basin and that part of Bull Run basin within Fairfax County are presented in this report. The techniques used in the computation of the flood profiles and delineation of flood boundaries are presented, and specific hydraulic problems encountered within the study area are also included.

Virginia↗

Bathymetry and vegetation in isolated marsh and cypress wetlands in the northern Tampa Bay Area, 2000-2004

Wetland bathymetry and vegetation mapping are two commonly used lines of evidence for assessing the hydrologic and ecologic status of expansive coastal and riverine wetlands. For small isolated freshwater wetlands, however, bathymetric data coupled with vegetation assessments are generally scarce, despite the prevalence of isolated wetlands in many regions of the United States and the recognized importance of topography as a control on inundation patterns and vegetation distribution. In the northern Tampa Bay area of west-central Florida, bathymetry was mapped and vegetation was assessed in five marsh and five cypress wetlands. These 10 isolated wetlands were grouped into three categories based on the effects of ground-water withdrawals from regional municipal well fields: natural (no effect), impaired (drier than natural), and augmented (wetlands with artificially augmented water levels). Delineation of the wetland perimeter was a critical component for estimating wetland-surface area and stored water volume. The wetland perimeter was delineated by the presence of Serenoa repens (the 'palmetto fringe') at 9 of the 10 sites. At the 10th site, where the palmetto fringe was absent, hydric-soils indicators were used to delineate the perimeter. Bathymetric data were collected using one or more techniques, depending on the physical characteristics of each wetland. Wetland stage was measured hourly using continuous stage recorders. Wetland vegetation was assessed semiannually for 2 1/2 years in fixed plots located at three distinct elevations. Vegetation assessments were used to determine the community composition and the relative abundance of obligate, facultative wet, and facultative species at each elevation. Bathymetry maps were generated, and stage-area and stage-volume relations were developed for all 10 wetlands. Bathymetric data sets containing a high density of data points collected at frequent and regular spatial intervals provided the most useful stage-area and stage-volume relations. Bathymetric maps of several wetlands also were generated using a low density of data points collected along transect lines or contour lines. In a comparative analysis of the three mapping approaches, stage-area and stage-volume relations based on transect data alone underestimated (by 50-100 percent over certain ranges of stage) the wetland area and volume compared to results using a high density of data points. Adding data points collected along one elevation contour below the wetland perimeter to the transect data set greatly improved the agreement of the resulting stage-area and stage-volume relations to the high-density mapping approach. Stage-area relations and routinely monitored stage data were used to compare and contrast the average flooded area in a natural marsh and an impaired marsh over a 2-year period. Vegetation assessments used together with flooded-area information provided the potential for extrapolating vegetation results from points or transects to wetlands as a whole. A comparison of the frequency of flooding of different areas of the wetland and the species composition in vegetation plots at different elevations indicated the dependence of vegetation on inundation frequency. Because of the broad tolerances of many wetlands plants to a range of inundation conditions, however, vegetation assessments alone provided less definitive evidence of the hydrologic differences between the two sites, and hydrologic changes occurring during the 2 years, than the flooded-area frequencies. Combining flooded-area frequencies with vegetation assessments could provide a more versatile and insightful approach for determining the ecological status of wetlands than using vegetation and stage data alone. Flooded-area frequencies may further provide a useful approach for assessing the ecological status of wetlands where historical vegetation surveys and stage data are lacking. Comparing the contemporary flooded-area frequencies a

Scientific Investigations Report↗