Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Information Series Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS1981

Map showing general chemical quality of ground water in the Richfield quadrangle, Utah

This is one of a series of maps that describe the geology and related natural resources of the Richfield 2° Quadrangle, Utah. The purpose of this map is to show the general chemical quality of ground water by ranges of dissolved-solids concentrations. The water quality varies considerably with depth in some areas; thus, the actual concentrations of dissolved solids of water in some aquifers locally may be somewhat larger or smaller than shown depending on the depth of those aquifers. This map is intended only for general planning purposes. Detailed site-specific information about general chemical quality of ground water in most parts of the map area can be gained only by special on-site investigation.

Utah↗
USGS2014

Seasonal cultivated and fallow cropland mapping using MODIS-based automated cropland classification algorithm

Increasing drought occurrences and growing populations demand accurate, routine, and consistent cultivated and fallow cropland products to enable water and food security analysis. The overarching goal of this research was to develop and test automated cropland classification algorithm (ACCA) that provide accurate, consistent, and repeatable information on seasonal cultivated as well as seasonal fallow cropland extents and areas based on the Moderate Resolution Imaging Spectroradiometer remote sensing data. Seasonal ACCA development process involves writing series of iterative decision tree codes to separate cultivated and fallow croplands from noncroplands, aiming to accurately mirror reliable reference data sources. A pixel-by-pixel accuracy assessment when compared with the U.S. Department of Agriculture (USDA) cropland data showed, on average, a producer’s accuracy of 93% and a user’s accuracy of 85% across all months. Further, ACCA-derived cropland maps agreed well with the USDA Farm Service Agency crop acreage-reported data for both cultivated and fallow croplands with R-square values over 0.7 and field surveys with an accuracy of ≥95% for cultivated croplands and ≥76% for fallow croplands. Our results demonstrated the ability of ACCA to generate cropland products, such as cultivated and fallow cropland extents and areas, accurately, automatically, and repeatedly throughout the growing season.

California↗
USGS1982

Map showing general availability of ground water in the Alton-Kolob coal-fields area, Utah

This is one of a series of maps that describes the geology and related natural resources of the Alton-Kolob coal-fields area, Utah. Shown on this map is the general availability of ground water as indicated by potential yields of individual wells and expected depth to water in wells. Most data used to compile this map were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources Division of Water Rights. Other sources of data included the U.S. Geological Survey 7½- and 15-minute topographic quadrangle maps, unpublished reports of field evaluations of potential shock-watering sites by U.S. Geological Survey personnel, and the geologic map of Utah (Stokes, 1964). This map is very generalized and is intended chiefly for planning purposes. It should be used with discretion. For more detailed information about the availability of ground water in various parts of the map area the reader is referred to the following reports: Thomas and Taylor (1946); Marine (1963); Sandberg (1963, 1966); Carpenter, Robinson, and Bjorklund (1964, 1967); Feltis (1966); Goode (1964, 1966); Cordova, Sandberg, and McConkie (1972); Cordova (1978, 1981); and Bjorklund, Sumison, and Sandberg (1977, 1978). For a general description of the chemical quality of ground water in the Alton-Kolob coal-fields area the reader is referred to Price (1981).

Utah↗
USGS1943

The Basin and Range Province in Utah, Nevada, and California

In this report an attempt has been made to summarize and in places to interpret the published information that was available through 1938 on the geology of those parts of Nevada, California, and Utah that are included in the geologic province known as the Basin and Range province. This region includes most of the Great Basin, from which no water flows to the sea, as well as part of the drainage basin of the lower Colorado River. It is characterized by numerous parallel, linear mountain ranges that are separated from one another by wide valleys or topographic basins. All the major divisions of geologic time are represented by the rocks exposed in this region. The oldest are of pre-Cambrian age and crop out chiefly along the eastern and southern borders. They have been carefully studied at only a few localities, and the correlation and extent of the subdivision so far recognized is uncertain. There appear to be at least three series of pre-Cambrian rocks which are probably separated from one another by profound unconformities. Large masses of intrusive igneous rocks have been recognized only in the oldest series. During the Paleozoic era the region was a part of the Cordilleran geosyncline, and sediments were deposited during all of the major and most of the minor subdivisions of the era. There are thick and widespread accumulations of Cambrian and Ordovician strata, the maximum aggregate thickness possibly exceeding 23,000 feet. The eastern and western boundaries of the province were approximately those of the area of rapid subsidence within the geosyncline, though the axes of maximum subsidence oscillated back and forth during the two periods. The Silurian and Devonian seas, on the other hand, extended beyond the province and, possibly as a consequence, are represented by much thinner sections - of the order of 6,000 feet. At the end of the Devonian period the geosyncline was split by the emergence of a geanticline in western Nevada, and Mississippian and Pennsylvanian sedimentary rocks are known only in the central and eastern part of the province. They locally attain considerable thicknesses, however, as the combined thickness of the two series in western Utah approaches 24,000 feet. The geanticline appears to have been eroded by Permian time, as Permian strata have been recognized in most parts of the province except the southern, where another geanticline, which persisted into the Mesozoic era, began to rise coincidentally with the disappearance of the older one. Igneous activity was at a minimum throughout the Paleozoic era. Some volcanism appears to have occurred locally in the Carboniferous period, but the lavas and sills cannot yet be accurately dated and may be somewhat younger. The second geanticline, which began to form in Permian time, was greatly extended during the Mesozoic era and eventually caused the disappearance of the geosynclinal seas that had persisted throughout most of Paleozoic time. Its axis lay east of the earlier geanticline, and its gradual emergence resulted in the development of two depositional troughs within the province. The western trough was filled with more than 30,000 feet of sediments and interbedded volcanic deposits, which range in age from basal Lower Triassic through the Lower Jurassic. Deposition in this trough was terminated by a period of intense orogeny near the end of Lower Jurassic time. The deposits of the eastern trough are found only along the eastern border of the province; they consist largely of nonmarine sedimentary beds ranging in age from Triassic to Upper Cretaceous. Marine Lower Triassic, possible Middle Triassic, and Upper Jurassic sedimentary rocks have been found in a few places, and some pyroclastic rocks occur in Lower Triassic and Upper Cretaceous beds. The eastern seaway appears to have been closed to the south, for lagoonal deposits, such as salines, characterize the southern and southeastern extensions of the marine formations. In addition to the sur

Professional Paper↗
USGS2014

Estimated 2012 groundwater potentiometric surface and drawdown from predevelopment to 2012 in the Santa Fe Group aquifer system in the Albuquerque metropolitan area, central New Mexico

Historically, the water-supply requirements of the Albuquerque metropolitan area of central New Mexico were met almost exclusively by groundwater withdrawal from the Santa Fe Group aquifer system. In response to water-level declines, the Albuquerque Bernalillo County Water Utility Authority (ABCWUA) began diverting water from the San Juan-Chama Drinking Water Project in December 2008 to reduce the use of groundwater to meet municipal demand. Modifications in the demand for water and the source of the supply of water for the Albuquerque metropolitan area have resulted in a variable response in the potentiometric surface of the production zone (the interval of the aquifer, from within about 200 feet below the water table to 900 feet or more, in which supply wells generally are screened) of the Santa Fe Group aquifer system. Analysis of the magnitude and spatial distribution of water-level change can help improve the understanding of how the groundwater system responds to withdrawals and variations in the management of the water supply and can support water-management agencies’ efforts to minimize future water-level declines and improve sustainability. The U.S. Geological Survey (USGS), in cooperation with the ABCWUA, has developed an estimate of the 2012 potentiometric surface of the production zone of the Santa Fe Group aquifer system in the Albuquerque metropolitan area. This potentiometric surface is the latest in a series of reports depicting the potentiometric surface of the area. This report presents the estimated potentiometric surface during winter (from December to March) of water year 2012 and the estimated changes in potentiometric surface between predevelopment (pre-1961) and water year 2012 for the production zone of the Santa Fe Group aquifer system in the Albuquerque metropolitan area. Hydrographs from selected piezometers are included to provide details of historical water-level changes. In general, water-level measurements used for this report were collected in small-diameter observation wells screened over short intervals near the middle of the production zone and were considered to best represent the potentiometric head in the production zone. The water-level measurements were collected by various local and Federal agencies. The water year 2012 potentiometric surface map was created in a geographic information system, and the change in water-level altitude from predevelopment to water year 2012 was calculated. The 2012 potentiometric surface indicates that the general direction of groundwater flow is from the Rio Grande towards clusters of supply wells in the east, north, and west. Water-level changes from predevelopment to 2012 were variable across the Albuquerque metropolitan area. Estimated drawdown from 2008 was spatially variable across the Albuquerque metropolitan area. Hydrographs from piezometers on the east side of the river indicate an increase in the annual highest water-level measurement from 2008 to 2012. Hydrographs from piezometers in the northwest part of the study area indicate either steady decline of the water-level altitude over the period of record or recently variable trends in which water-level altitudes increased for a number of years but have declined since water year 2012.

New Mexico↗
USGS2006

Preliminary integrated geologic map databases for the United States: Digital data for the reconnaissance geologic map of the western Aleutian Islands, Alaska

The growth in the use of Geographic Information Systems (GIS) has highlighted the need for digital geologic maps that have been attributed with information about age and lithology. Such maps can be conveniently used to generate derivative maps for manifold special purposes such as mineral-resource assessment, metallogenic studies, tectonic studies, and environmental research. This report is part of a series of integrated geologic map databases that cover the entire United States. Three national-scale geologic maps that portray most or all of the United States already exist; for the conterminous U.S., King and Beikman (1974a,b) compiled a map at a scale of 1:2,500,000, Beikman (1980) compiled a map for Alaska at 1:2,500,000 scale, and for the entire U.S., Reed and others (2005a,b) compiled a map at a scale of 1:5,000,000. A digital version of the King and Beikman map was published by Schruben and others (1994). Reed and Bush (2004) produced a digital version of the Reed and others (2005a) map for the conterminous U.S. The present series of maps is intended to provide the next step in increased detail. State geologic maps that range in scale from 1:100,000 to 1:1,000,000 are available for most of the country, and digital versions of these state maps are the basis of this product. The digital geologic maps presented here are in a standardized format as ARC/INFO Exportfiles/ and as ArcView shape files. Data tables that relate the map units to detailed lithologic and age information accompany these GIS files. The map is delivered as a set 1:250,000-scale quadrangle files. To the best of our ability, these quadrangle files are edge-matched with respect to geology. When the maps are merged, the combined attribute tables can be used directly with the merged maps to make derivative maps.

Alaska↗
USGS2006

Preliminary integrated geologic map databases for the United States: Digital data for the reconnaissance geologic map of the lower Yukon River region, Alaska

The growth in the use of Geographic Information Systems (GIS) has highlighted the need for digital geologic maps that have been attributed with information about age and lithology. Such maps can be conveniently used to generate derivative maps for manifold special purposes such as mineral-resource assessment, metallogenic studies, tectonic studies, and environmental research. This report is part of a series of integrated geologic map databases that cover the entire United States. Three national-scale geologic maps that portray most or all of the United States already exist; for the conterminous U.S., King and Beikman (1974a,b) compiled a map at a scale of 1:2,500,000, Beikman (1980) compiled a map for Alaska at 1:2,500,000 scale, and for the entire U.S., Reed and others (2005a,b) compiled a map at a scale of 1:5,000,000. A digital version of the King and Beikman map was published by Schruben and others (1994). Reed and Bush (2004) produced a digital version of the Reed and others (2005a) map for the conterminous U.S. The present series of maps is intended to provide the next step in increased detail. State geologic maps that range in scale from 1:100,000 to 1:1,000,000 are available for most of the country, and digital versions of these state maps are the basis of this product. The digital geologic maps presented here are in a standardized format as ARC/INFO export files and as ArcView shape files. Data tables that relate the map units to detailed lithologic and age information accompany these GIS files. The map is delivered as a set 1:250,000-scale quadrangle files. To the best of our ability, these quadrangle files are edge-matched with respect to geology. When the maps are merged, the combined attribute tables can be used directly with the merged maps to make derivative maps.

Alaska↗
USGS2006

Preliminary integrated geologic map databases for the United States: Digital data for the reconnaissance bedrock geologic map for the northern Alaska peninsula area, southwest Alaska

he growth in the use of Geographic Information Systems (GIS) has highlighted the need for digital geologic maps that have been attributed with information about age and lithology. Such maps can be conveniently used to generate derivative maps for manifold special purposes such as mineral-resource assessment, metallogenic studies, tectonic studies, and environmental research. This report is part of a series of integrated geologic map databases that cover the entire United States. Three national-scale geologic maps that portray most or all of the United States already exist; for the conterminous U.S., King and Beikman (1974a,b) compiled a map at a scale of 1:2,500,000, Beikman (1980) compiled a map for Alaska at 1:2,500,000 scale, and for the entire U.S., Reed and others (2005a,b) compiled a map at a scale of 1:5,000,000. A digital version of the King and Beikman map was published by Schruben and others (1994). Reed and Bush (2004) produced a digital version of the Reed and others (2005a) map for the conterminous U.S. The present series of maps is intended to provide the next step in increased detail. State geologic maps that range in scale from 1:100,000 to 1:1,000,000 are available for most of the country, and digital versions of these state maps are the basis of this product. The digital geologic maps presented here are in a standardized format as ARC/INFO export files and as ArcView shape files. Data tables that relate the map units to detailed lithologic and age information accompany these GIS files. The map is delivered as a set 1:250,000-scale quadrangle files. To the best of our ability, these quadrangle files are edge-matched with respect to geology. When the maps are merged, the combined attribute tables can be used directly with the merged maps to make derivative maps.

Alaska↗
USGS1954

Southern California Water Bulletin for 1953: General review of the water resources of Southern California for the water year of 1952-53 with special reference to the surface runoff for the water year of 1951-52

This WATER BULLETTIN is one of a series issued annually since June 1944. Its main purpose is to present a brief analysis of those phases of the local water supply associated with the work of the Geological Survey. The first part of this review deals with the water resources for the water year ending September 30, 1953. It contains a brief analysis of the annual precipitation, the provisional runoff at a few stations, the changes in water reserves both in surface reservoirs and underground, and the imported waters. It concludes by pointing out the deficiences in the local water reserves. This bulletin has been prepared by the Surface Water Branch; the section on ground-water conditions was prepared chiefly from information supplied by the Ground Hater Branch.

California↗
USGS2017

Trawl-based assessment of Lake Ontario pelagic prey fishes including Alewife and Rainbow Smelt

Managing Lake Ontario fisheries in an ecosystem-context, requires reliable data on the status and trends of prey fishes that support predator populations. We report on the community and population dynamics of Lake Ontario pelagic prey fishes, based on bottom trawl surveys. We emphasize information that supports the international Lake Ontario Committee’s Fish Community Objectives. In 2016, 142 bottom trawls were collected in U.S. waters, and for the first time 46 trawls were conducted in Canadian waters. A total of 420,386 fish from 24 species were captured. Alewife were 89% of the total fish catch and 93% of the pelagic prey fish catch. The Rainbow Smelt abundance index in U.S. waters increased slightly in 2016 relative to 2015. Interestingly, the Rainbow Smelt abundance index from tows in Canadian waters was 35% higher than the U.S. index. Abundances of Threespine Stickleback and Emerald Shiners in both U.S. and Canadian waters were low in 2016 relative to their peak abundances in the late 1990s, but Cisco abundance indices suggest a recent increase in their abundance. This year, the reported Alewife abundance time series was truncated to only include values since 1997, which were collected with the same trawl and eliminated the need to adjust values for different trawls. The 2016 adult Alewife abundance index was the second lowest abundance ever observed in the time series. This value was expected to decline from the 2015 value since the indices of juvenile Alewife were low in 2014 and the lowest ever observed in 2015. The fall condition index of adult Alewife increased in 2016 and is consistent with lower abundance and reduced competition for zooplankton resources. The 2016 Age-1 Alewife index increased relative to 2014 and 2015, and suggested lake conditions were favorable for Age-1 survival and growth during the summer of 2015 and the 2015-2016 winter. Interestingly, the catch of adult and Age1 Alewife was higher in trawls conducted in Canadian waters relative to U. S. waters. The larger trawl catches in Canadian waters suggest there may be important spatial differences in lake-wide distribution of prey fishes in April when trawling is conducted. Future surveys should to continue to sample at the whole-lake scale to understand the year to year variability in spatial distribution and the physical or biotic factors driving those distribution differences.

Report↗
USGS2009

Application guide for AFINCH (Analysis of Flows in Networks of Channels) described by NHDPlus

AFINCH (Analysis of Flows in Networks of CHannels) is a computer application that can be used to generate a time series of monthly flows at stream segments (flowlines) and water yields for catchments defined in the National Hydrography Dataset Plus (NHDPlus) value-added attribute system. AFINCH provides a basis for integrating monthly flow data from streamgages, water-use data, monthly climatic data, and land-cover characteristics to estimate natural monthly water yields from catchments by user-defined regression equations. Images of monthly water yields for active streamgages are generated in AFINCH and provide a basis for detecting anomalies in water yields, which may be associated with undocumented flow diversions or augmentations. Water yields are multiplied by the drainage areas of the corresponding catchments to estimate monthly flows. Flows from catchments are accumulated downstream through the streamflow network described by the stream segments. For stream segments where streamgages are active, ratios of measured to accumulated flows are computed. These ratios are applied to upstream water yields to proportionally adjust estimated flows to match measured flows. Flow is conserved through the NHDPlus network. A time series of monthly flows can be generated for stream segments that average about 1-mile long, or monthly water yields from catchments that average about 1 square mile. Estimated monthly flows can be displayed within AFINCH, examined for nonstationarity, and tested for monotonic trends. Monthly flows also can be used to estimate flow-duration characteristics at stream segments. AFINCH generates output files of monthly flows and water yields that are compatible with ArcMap, a geographical information system analysis and display environment. Chloropleth maps of monthly water yield and flow can be generated and analyzed within ArcMap by joining NHDPlus data structures with AFINCH output. Matlab code for the AFINCH application is presented.

Scientific Investigations Report↗
USGS2003

Geoenvironmental Investigations of the Humboldt River Basin, Northern Nevada

Northern Nevada is one of the world's foremost regions of gold production. The Humboldt River Basin (HRB) covers 43,500 km2 in northern Nevada (Crompton, 1995), and it is home to approximately 18 active gold and silver mines (Driesner and Coyner, 2001) among at least 55 significant metallic mineral deposits (Long and others, 1998). Many of the gold mines are along the Carlin trend in the east-central portion of the HRB, and together they have produced 50 million ounces of gold from 1962 (when the Carlin mine first opened) through April 2002 (Nevada Mining Association, 2002). Mining is not new to the region, however. Beginning in 1849, mining has taken place in numerous districts that cover 39 percent of the land area in the HRB (Tingley, 1998). In addition to gold and silver, As, Ba, Cu, Fe, Hg, Li, Mn, Mo, Pb, S, Sb, V, W, Zn, and industrial commodities such as barite, limestone, fluorite, sand and gravel, gypsum, gemstones, pumice, zeolites, and building stone, have been extracted from the HRB (McFaul and others, 2000). All papers within this series of investigations can be found as lettered chapters of USGS Bulletin 2210, Geoenvironmental Investigations of the Humboldt River Basin, Northern Nevada. Each chapter is available separately online. The data and software utilized in this product (Chapter F) permit the user to view and analyze the geographic relationships among chemistry of stream sediments and surface waters, geology, and various cartographic base information such as but not limited to cities, county boundaries, and land ownership. Data for this product were compiled and or produced as part of a mineral and environmental assessment of the Humboldt River basin conducted by the U.S. Geological Survey between 1995 - 2000.

Bulletin↗
USGS2001

Occurrence of selected radionuclides in ground water used for drinking water in the United States: A reconnaissance survey, 1998

The U.S. Geological Survey, in collaboration with the U.S. Environmental Protection Agency, the American Water Works Association, and the American Water Works Service Company, completed a targeted national reconnaissance survey of selected radionuclides in public ground-water supplies. Radionuclides analyzed included radium-224 (Ra-224), radium-226 (Ra-226), radium-228 (Ra-228), polonium-210 (Po-210) and lead-210 (Pb-210).This U.S. Geological Survey reconnaissance survey focused intentionally on areas with known or suspected elevated concentrations of radium in ground water to determine if Ra-224 was also present in the areas where other isotopes of radium had previously been detected and to determine the co-occurrence characteristics of the three radium isotopes (Ra-224, Ra-226, and Ra-228) in those areas. Ninety-nine raw-water samples (before water treatment) were collected once over a 6-month period in 1998 and 1999 from wells (94 of which are used for public drinking water) in 27 States and 8 physiographic provinces. Twenty-one of the 99 samples exceeded the current U.S. Environmental Protection Agency drinking-water maximum contaminant level of 5 picocuries per liter (pCi/L) for combined radium (Ra-226 + Ra-228). Concentrations of Ra-224 were reported to exceed 1 pCi/L in 30 percent of the samples collected, with a maximum concentration of 73.6 pCi/L measured in water from a nontransient, noncommunity, public-supply well in Maryland. Radium-224 concentrations generally were higher than those of the other isotopes of radium. About 5 percent of the samples contained concentrations of Ra-224 greater than 10 pCi/L, whereas only 2 percent exceeded 10 pCi/L for either Ra-226 or Ra-228. Concentrations of Ra-226 greater than 1 pCi/L were reported in 33 percent of the samples, with a maximum concentration of 16.9 pCi/L measured in water from a public-supply well in Iowa. Concentrations of Ra-228 greater than 1 pCi/L were reported in 22 samples, with a maximum concentration of 72.3 pCi/L measured in water from a non-transient, noncommunity, public-supply well in Maryland.Radium-224, which is a decay product of Ra-228 in the Th-232 decay series, was significantly correlated with Ra-228 (Spearman?s rank correlation coefficient ?r? equals 0.82) and to a lesser degree with Ra-226 (r equals 0.69), which is an isotope in the U-238 decay series. The rank correlation coefficient between Ra-226 and Ra-228 was 0.63. The high correlation between Ra-224 and Ra-228 concentrations and the corresponding isotopic ratios of the two (about 1:1 in 90 percent of the samples) indicates that the two radionuclides occur in approximately equal concentrations in most ground water sampled. Thus, Ra-228 can be considered as a reasonable proxy indicator for the occurrence of Ra-224 in ground water.The maximum concentration of Po-210 was 4.85 pCi/L and exceeded 1 pCi/L in only two samples. The maximum concentration of Pb-210 was 4.14 pCi/L, and about 10 percent of the samples exceeded 1 pCi/L. Areas with known, or suspected, elevated concentrations of polonium and lead were not targeted in this survey.Three major implications are drawn for future radionuclide monitoring on the basis of this information: (1) grossalpha particle analyses of ground water should be done within about 48-72 hours after collection to determine the presence of the short-lived, alpha-particle emitting isotopes, such as Ra-224, which was detected in elevated concentrations in many of the samples collected for this survey; (2) the isotope ratios of Ra-224 to Ra-228 in ground water are variable on a national scale, but the two radioisotopes generally occur in ratios near 1:1, therefore, the more commonly measured Ra-228 can be used as an indicator of Ra-224 occurrence for some general purposes other than compliance; and (3) the isotopic ratios of Ra-226 to Ra-228 were less than 3:2 in many samples. These ratios corroborate results of previous studies that have shown the presence of Ra-228.

Water-Resources Investigations Report↗
USGS2016

Characterization of fractures and flow zones in a contaminated crystalline-rock aquifer in the Tylerville section of Haddam, Connecticut

The U.S. Geological Survey, in cooperation with the Connecticut Department of Energy and Environmental Protection, investigated the characteristics of the bedrock aquifer in the Tylerville section of Haddam, Connecticut, from June to August 2014. As part of this investigation, geophysical logs were collected from six water-supply wells and were analyzed to (1) identify well construction, (2) determine the rock type and orientation of the foliation and layering of the rock, (3) characterize the depth and orientation of fractures, (4) evaluate fluid properties of the water in the well, and (5) determine the relative transmissivity and head of discrete fractures or fracture zones. The logs included the following: caliper, electromagnetic induction, gamma, acoustic and (or) optical televiewer, heat-pulse flowmeter under ambient and pumped conditions, hydraulic head data, fluid electrical conductivity and temperature under postpumping conditions, and borehole-radar reflection collected in single-hole mode. In a seventh borehole, a former water-supply well, only caliper, fluid electrical conductivty, and temperature logs were collected, because of a constriction in the borehole. This report includes a description of the methods used to collect and process the borehole geophysical data, the description of the data collected in each of the wells, and a comparison of the results collected in all of the wells. The data are presented in plots of the borehole geophysical logs, tables, and figures. Collectively these data provide valuable characterizations that can be used to improve or inform site conceptual models of groundwater flow in the study area.

Connecticut↗
USGS1980

Map showing general chemical quality of surface water in the Richfield Quadrangle, Utah

This is one of a series of maps that describe the geology and related natural resources of the Richfield 2° quadrangle, Utah. The purpose of this map is to show the general chemical quality of surface water in the area by ranges of dissolved-solids concentrations. Data used to compile this map were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Rights. In those areas where little or no surface-water-quality data are available, ranges of dissolved-solids concentrations of the water are inferred on the basis of such factors as geology (Stokes, 1964), precipitation, topography, known ground-water quality, and water uses – all of which affect the chemical quality of surface water. Additional information about the chemical quality of surface water in various parts of the Richfield 2° quadrangle may be found in the following reports: Hahl and Cabell (1965), Hahl and Mundorff (1968), Stephens (1974, 1976), Cruff and Mower (1976), and Cruff(1977)

Utah↗
USGS2006

Chemical and isotopic database of water and gas from hydrothermal systems with an emphasis for the western United States

Chemical and isotope data accumulated by two USGS Projects (led by I. Barnes and R. Mariner) over a time period of about 40 years can now be found using a basic web search or through an image search (left). The data are primarily chemical and isotopic analyses of waters (thermal, mineral, or fresh) and associated gas (free and/or dissolved) collected from hot springs, mineral springs, cold springs, geothermal wells, fumaroles, and gas seeps. Additional information is available about the collection methods and analysis procedures . The chemical and isotope data are stored in a MySQL database and accessed using PHP from a basic search form below. Data can also be accessed using an Open Source GIS called WorldKit by clicking on the image to the left. Additional information is available about WorldKit including the files used to set up the site.

Data Series↗
USGS1991

System requirements specification for the U.S. Geological Survey's National Water Information System II

The U.S. Geological Survey's Water Resources Division is designing and developing a new computer software system for processing and storing hydrologic data. This system, the National Water Information System (NWIS-II) will replace the current water-data and information systems: the National Water Data Storage and Retrieval System (WATSTORE), the National Water Data Exchange (NAWDEX), and the National Water-Use Information System, as well as the current National Water Information System (NWIS-I). The new system will be utilized across the Nation on the Distributed Information System (DIS-II), a network of 32-bit microcomputers on a wide-area network of desktop workstations and related hardware. The purpose of the NWIS-II System Requirements Specification is to integrate requirements described by eight User Groups representing the disciplines for Surface Water, Ground Water, Water Quality, Water Sediment, Water Use, Biology, Geographic Information, and National Water Data Exchange. The requirements specified in this document will serve as the framework for subsequent design and development activities throughout the life cycle of NWIS-II to ensure that the development products reflect the needs of the users. Specification details and associated data-base plans are contained in the description of the integrated functional requirements, the logical data model and the data dictionary, the plan for transferring data from the existing system to NWIS-II, and the descriptions of performance requirements and design constraints. The NWIS-II will be consistent across hydrologic disciplines and the other major Division software systems. The color-graphics desktop environment of NWIS-II will utilize multi-window and multi-tasking capabilities with multilevel of help for the users. Data will be distributed among nodes and be automatically accessible during input, editing, verification and analysis of data. Hydrologic data will be cataloged independent of the Environmental Protection Agency's storage and retrieval (STORET) codes. Character, digital, and graphical data will be entered into NWIS-II from digital and analog recorders, external files, or keyboard through standard and user-defined input forms. Data will be verified manually or automatically during input, retrieval, and editing of data. Numerous reference lists will be maintained so that entry of codes on forms will not be required. User-defined series of computer actions for standard programs will be supported for processing basic data and other frequently repeated processes. Data will be verified and exchanged through links to other DIS-II software, including a Geographic Information System, and selected external software. Quality assurance of data will include aging of data through change on status type and tracking access violations. Output of data will be to a variety of media in standard and user-defined formats. The data base will be preserved by operations such as backup, recovery, audit trails, archiving, and data histories. In addition, an index of water data from USGS and other agencies will be maintained.

Open-File Report↗
USGS2011

National Assessment of Shoreline Change; historical shoreline change along the New England and Mid-Atlantic coasts

Beach erosion is a chronic problem along many open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information regarding past and present trends and rates of shoreline movement. There is also a need for a comprehensive analysis of shoreline movement that is consistent from one coastal region to another. To meet these national needs, the U.S. Geological Survey (USGS) is conducting an analysis of historical shoreline changes along open-ocean sandy shores of the conterminous United States and parts of Hawaii, Alaska, and the Great Lakes. One purpose of this work is to develop standard, repeatable methods for mapping and analyzing shoreline movement so that periodic, systematic, internally consistent updates regarding coastal erosion and land loss can be made nationally. In the case of this study, the shoreline is the interpreted boundary between the ocean water surface and the sandy beach. This report on the New England and Mid-Atlantic coasts is the fifth in a series of reports on historical shoreline change. Previous investigations include analyses and descriptive reports of the Gulf of Mexico, the Southeast Atlantic, and, for California, the sandy shoreline and the coastal cliffs. The rates of change presented in this report represent conditions up to the date of the most recent shoreline data and therefore are not intended for predicting future shoreline positions or rates of change. Because of the geomorphology of the New England and Mid-Atlantic (rocky coastlines, large embayments and beaches) as well as data gaps in some areas, this report presents beach erosion rates for 78 percent of the 1,360 kilometers of the New England and Mid-Atlantic coasts. The New England and Mid-Atlantic shores were subdivided into a total of 10 analysis regions for the purpose of reporting regional trends in shoreline change rates. The average rate of long-term shoreline change for the New England and Mid-Atlantic coasts was -0.5 meters per year with an uncertainty in the long-term trend of plus or minus 0.09 meters per year. The rate is based on shoreline change rates averaged from 21,184 individual transects, of which 68 percent were eroding. In both the long and short term, the average rates of shoreline change for New England and the Mid-Atlantic were erosional. Long-term erosion rates were generally lower in New England than in the Mid-Atlantic. This is a function of the dominant coastal geomorphology; New England has a greater percentage of shore types that tend to erode more slowly (rocky coasts, pocket beaches, and mainland beaches), whereas the Mid-Atlantic is dominated by more vulnerable barrier islands and dynamic spit/inlet environments. However, the percentage of coastline eroding was higher in New England than in the Mid-Atlantic, highlighting that although rates of shoreline erosion may not be extreme, coastal erosion is still widespread along this region of the U.S. coastline. The average rate of short-term shoreline change for the New England and Mid-Atlantic coasts was also erosional but the rate of erosion decreased in comparison to long-term rates. The net short-term rate as averaged along 17,045 transects was -0.3 meters per year. Uncertainties for these rates range from 0.06 to 0.1 meters per year depending on the data sources used in the rate calculations. Of transects used to measure short-term change, 60 percent were erosional, as compared to 65 percent of coast eroding in the long term. The slight decrease (5 percent) in the amount of coastline eroding may be related to an increase in the frequency and extent of nourishment programs and (or) the effects of hardened structures during the more recent time period. The most stable (lower rates of erosion) beaches were more commonly found in New England. Despite an overall lowering of the average rates of erosion from long-term to short-term, the amount

Open-File Report↗