Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources

Mineral potential modelling of gold and silver mineralization in the Nevada Great Basin — A GIS-based analysis using weights of evidence

The distribution of 2,690 gold-silver-bearing occurrences in the Nevada Great Basin was examined in terms of spatial association with various geological phenomena. Analysis of these relationships, using GIS and weights of evidence modelling techniques, has predicted areas of high mineral potential where little or no mining activity exists. Mineral potential maps for sedimentary ("disseminated") and volcanic ("epithermal") rock-hosted gold-silver mineralization revealed two distinct patterns that highlight two sets of crustal-scale geologic features that likely control the regional distribution of these deposit types. The weights of evidence method is a probability-based technique for mapping mineral potential using the spatial distribution of known mineral occurrences. Mineral potential maps predicting the distribution of gold-silver-bearing occurrences were generated from structural, geochemical, geomagnetic, gravimetric, lithologic, and lithotectonic-related deposit-indicator factors. The maps successfully predicted nearly 70% of the total number of known occurrences, including ~83% of sedimentary and ~60% of volcanic rock-hosted types. Sedimentary and volcanic rockhosted mineral potential maps showed high spatial correlation (an area cross-tabulation agreement of 85% and 73%, respectively) with expert-delineated mineral permissive tracts. In blind tests, the sedimentary and volcanic rock-hosted mineral potential maps predicted 10 out of 12 and 5 out of 5 occurrences, respectively. The key mineral predictor factors, in order of importance, were determined to be: geology (including lithology, structure, and lithotectonic terrane), geochemistry (indication of alteration), and geophysics.

Nevada↗

Water, ice and mud: Lahars and lahar hazards at ice- and snow-clad volcanoes

Large-volume lahars are significant hazards at ice and snow covered volcanoes. Hot eruptive products produced during explosive eruptions can generate a substantial volume of melt water that quickly evolves into highly mobile flows of ice, sediment and water. At present it is difficult to predict the size of lahars that can form at ice and snow covered volcanoes due to their complex flow character and behaviour. However, advances in experiments and numerical approaches are producing new conceptual models and new methods for hazard assessment. Eruption triggered lahars that are ice-dominated leave behind thin, almost unrecognizable sedimentary deposits, making them likely to be under-represented in the geological record.

Geology Today↗

Clay minerals: A guide to their x-ray identification

This paper is a guide to the X-ray examination of clay minerals; it incorporates background information concerning the principal crystallographic features of clay minerals, and how this is used in the X-ray identification of these minerals, together with laboratory techniques and the application of X-ray diffractometry to the diagnosis of the clay minerals in natural sedimentary materials.

Special Papers of the Geological Society of Americ↗

Seismic survey in the region of recent earthquake activity near Denver, Colorado

A seismic -reflection survey was carried out near Denver , Colorado , for the U. S. Geological Survey , to determine if structures exist in the 12,000-ft sedimentary section or in the Precambrian basement that might explain the recent earthquake activity . No major faults were revealed in the sedimentary section. Reflections from a steeply dipping horizon believed to be in the basement complex may be indicative of faulting; however, the magnitude cannot be ascertained, as reflection events cannot be correlated at these depths. The results of the survey suggest the possibility of monitoring and studying subsurface structural conditions and related parameters in regions of seismic activity and/or suspected zones of tectonic instability.

Colorado↗

GIS database and discussion for the distribution, composition, and age of Cenozoic volcanic rocks of the Pacific Northwest Volcanic Aquifer System study area

A substantial part of the U.S. Pacific Northwest is underlain by Cenozoic volcanic and continental sedimentary rocks and, where widespread, these strata form important aquifers. The legacy geologic mapping presented with this report contains new thematic categorization added to state digital compilations published by the U.S. Geological Survey for Oregon, California, Idaho, Nevada, Utah, and Washington (Ludington and others, 2005). Our additional coding is designed to allow rapid characterization, mainly for hydrogeologic purposes, of similar rocks and deposits within a boundary expanded slightly beyond that of the Pacific Northwest Volcanic Aquifer System study area. To be useful for hydrogeologic analysis and to be more statistically manageable, statewide compilations from Ludington and others (2005) were mosaicked into a regional map and then reinterpreted into four main categories on the basis of (1) age, (2) composition, (3) hydrogeologic grouping, and (4) lithologic pattern. The coding scheme emphasizes Cenozoic volcanic or volcanic-related rocks and deposits, and of primary interest are the codings for composition and age.

Pacific Northwest Volcanic Aquifer System↗

Geology of the Romanzof Mountains, Brooks Range, northeastern Alaska

This remote 700 square mile area in the Brooks Range is topographically rugged and geologically diverse; it contains a granitic pluton, low-grade metamorphic rocks, sedimentary rocks, and mafic igneous rocks, as well as glacial features. Rocks of sedimentary origin include from oldest to youngest: 1.Neruokpuk Formation Middle and Upper Devonian(?), more than 4000 feet thick, a variety of units which represent the greenschist facies, including quartzitic- and schistose-feldspathic graywacke; phyllite, argillite, and slate, as well as dark limestone, sandy limestone, and silicified carbonate rocks. The succession of units in parts of the area is uncertain. Correlations between these units and with others in the eastern Brooks Range are provisional. 2.Kekiktuk Conglomerate and Kayak(?) Shale (Upper Devonian(?) to Upper Mississippian), a single map unit, from absent(?) to 400+ feet thick, containing dark shale Kayak(?) in its uppermost part and quartzite, interbedded dark shale, and some pebble- to boulder-conglomerate in the locally absent lower part (Kekiktuk). The unit overlies the Neruokpuk with angular unconformity, which may reflect either a pre-Kayak(?) or pre-Kekiktuk hiatus or both. 3.Lisburne Group, almost entirely carbonate rocks, and relatively thin in this area, 600 to 800 feet thick. Alapah Limestone (Upper Mississippian), to 560 feet thick, includes gray sandy, crystalline, and cherty limestone; minor dark shale; and dark cherty carbonate rocks in the upper part. The lower contact is gradational with the Kayak(?). Wahoo(?) Limestone (Pennsylvanian(?) to Permian) conformably overlies the Alapah, is absent to 200+ feet thick, and is characterized by light-gray crinoidal limestones in its upper part. 4. Sadlerochit Formation, consisting of three intraconformable units: ferruginous sandstone member (Permian) of ironstained orthoquartzite and dark slate, 175 to 240 feet thick which unconformably overlies the Wahoo(?) and Alapah Limestones; shale member of dark shale, slate, and minor quartzite averaging 400 feet in thickness; and quartzite member (Lower(?) Triassic), 700 feet thick, mostly orthoquartzite with minor shale and conglomerate. The basal clastics were probably shed from the north. 5.Shublik Formation (Middle(?) and Upper Triassic), 600 to 700 feet thick, with the thin phosphatic sandstone member overlain by dark phosphatic limestones and limy shales of the limestone member. 6.Kingak Formation (Jurassic), more than 1000 feet thick. The siltstone member, resistant sandstone and siltstone 75 to 150 feet thick, is overlain by an undetermined thickness of black shale. The basal part contrasts sharply with the underlying Shublik, indicating possible disconformity. 7.Ignek(?) Formation (Cretaceous), represented in the foothills where lithic graywacke, shale, and coaly shale constitute the few exposures examined. 8.Glacial and glaciofluvial materials of five advances recognized on the basis of morphology and position, which are tentatively correlated with five glaciations 15 miles west of the area. 9. Recent alluvial and colluvial deposits including fans which appear to represent at least three stages of encroachment. The Ramanzof granite, exposed in the Okpilak batholith and Jago stock, is mostly light-gray quartz monzonite to granite, and contains essential quartz, perthitic microcline, albite-oligoclase, and partly chloritized biotite. Limited modal and chemical data are presented. Three textural facies are: 1) porphyritic (marginal), with abundant large microcline megacrysts; 2) variable (middle to marginal), which exhibits textural and mineralogical banding; and 3) coarse (inner to marginal), which is gneissoid to equigranular. Facies relationships appear to be mostly gradational but may be locally intrusive. Some schistose metasedimentary(?) rock occurs in the granite. Aplite dikes, inclusions, tourmaline veins and replacements, and chlorite and quartz veins are locally common, as well as quartz monzonite and mafic igneous dikes. Contacts with Neruokpuk Formation rocks are mostly abrupt, concordant to cross-cutting, and locally adjoin tactite and hornfels of the albite-epidote-hornfels and hornblende-hornfels facies. Contacts with Kekiktuk Conglomerate are apparently gradational through a schistoze zone. Both primary and secondary structural elements are present in the Romanzof in granite. Textural and mineralogical banding and, in general, feldspar foliation are considered to be primary in origin; biotite foliation, gneissic and schistose foliation, and schistose zones are considered secondary. Lead-alpha age of zircons appears to be Late Devonian, K-Ar age of biotite is Cretaceous, possibly indicating updating by later reheating. Field age relationships are inconclusive but suggest pre-Kayak(?) (Upper Devonian) granite emplacement. The pluton is interpreted to be essentially the product of melt crystallization, synorogenically emplaced by forceful injection with minor stoping, and may include marginally granitized rock. Mafic igneous rocks of altered basaltic composition (greenstones) include dikes in granitic and Neruokpuk Formation rocks, and volcanics(?). A late Paleozoic age is suggested for them. Structural grain strikes east-northeast; south-dipping elements are common. Structures include the major positive nature of the area (first order), relatively broad folds (second order) which contain small tight folds (third order). Related south-dipping cleavage, schistosity, and biotite foliation in granite in the northern part of the area are cut by prominent sets of transverse joints and faults. Other features are longitudinal normal and reverse faults, at least one large-scale overthrust fault, and sheared zones in granite with possible attendant retrograde metamorphism. Although Mesozoic and Tertiary deformational features are dominant in northern Alaska, the Romanzof area may have been part of a Late Devonian orogenic belt continuous with one in northern Canada. Three alternate trends of such a belt in northern Alaska are discussed, but evidence is inconclusive. The mineral potential of the area is largely unknown. Minor amounts of metallic sulfides and oxides are present in granite and Neruokpuk Formation rocks. Analyses of stream silt samples suggest the possibility of tin and beryllium potential. The Shublik Formation contains rock phosphate.

Alaska↗

Hydrogeology and ground-water quality, Chippewa Township, Isabella County, Michigan, 2002-05

The ground-water resource potential of Chippewa Township, Isabella County, Mich. was characterized on the basis of existing hydrogeologic data, water-level records, analyses of water samples, and interpretation of geophysical survey data. Eight ground-water samples were collected and analyzed for major ions, nutrients, and trace-metal composition. In addition, 10 direct current-resistivity soundings were collected throughout Chippewa and Coe Townships to identify potential freshwater in the aquifer system. The aquifer system includes complexly interbedded glaciofluvial, glaciolacustrine, and basal-lodgment tills, which overlie Jurassic or Pennsylvanian sedimentary rocks. In parts of the township, freshwater is present in all geologic units, but in most areas saline water is encountered near the base of Pleistocene glacial deposits and in the Jurassic or Pennsylvanian bedrock. A near-surface sheet of relatively dense basal-lodgment till likely prevents, or substantially retards, significant direct recharge of ground water to glacial and bedrock aquifers in Chippewa and adjacent townships. Glacial sands and gravels form the principal aquifer for domestic wells (97.5 percent of wells in the township). The single community water supply in the township has wells screened in glacial deposits near the base of the glacial drift. Increased withdrawals of ground water in response to increasing demand has led to a slight decline in water quality from this supply. This water-quality decline is related primarily to an increase of dissolved sulfate, which is probably a function of well depth and dissolution of gypsum, a common mineral constituent in the Jurassic “red beds” , which form the uppermost bedrock unit throughout most of the township. One explanation for the increase in sulfate is upconing of saline water from bedrock sources, which may contain saline water.

Michigan↗

Hydrogeologic framework and estimates of groundwater storage for the Hualapai Valley, Detrital Valley, and Sacramento Valley basins, Mohave County, Arizona

We have investigated the hydrogeology of the Hualapai Valley, Detrital Valley, and Sacramento Valley basins of Mohave County in northwestern Arizona to develop a better understanding of groundwater storage within the basin fill aquifers. In our investigation we used geologic maps, well-log data, and geophysical surveys to delineate the sedimentary textures and lithology of the basin fill. We used gravity data to construct a basin geometry model that defines smaller subbasins within the larger basins, and airborne transient-electromagnetic modeled results along with well-log lithology data to infer the subsurface distribution of basin fill within the subbasins. Hydrogeologic units (HGUs) are delineated within the subbasins on the basis of the inferred lithology of saturated basin fill. We used the extent and size of HGUs to estimate groundwater storage to depths of 400 meters (m) below land surface (bls). The basin geometry model for the Hualapai Valley basin consists of three subbasins: the Kingman, Hualapai, and southern Gregg subbasins. In the Kingman subbasin, which is estimated to be 1,200 m deep, saturated basin fill consists of a mixture of fine- to coarse-grained sedimentary deposits. The Hualapai subbasin, which is the largest of the subbasins, contains a thick halite body from about 400 m to about 4,300 m bls. Saturated basin fill overlying the salt body consists predominately of fine-grained older playa deposits. In the southern Gregg subbasin, which is estimated to be 1,400 m deep, saturated basin fill is interpreted to consist primarily of fine- to coarse-grained sedimentary deposits. Groundwater storage to 400 m bls in the Hualapai Valley basin is estimated to be 14.1 cubic kilometers (km 3 ). The basin geometry model for the Detrital Valley basin consists of three subbasins: northern Detrital, central Detrital, and southern Detrital subbasins. The northern and central Detrital subbasins are characterized by a predominance of playa evaporite and fine-grained clastic deposits; evaporite deposits in the northern Detrital subbasin include halite. The northern Detrital subbasin is estimated to be 600 m deep and the middle Detrital subbasin is estimated to be 700 m deep. The southern Detrital subbasin, which is estimated to be 1,500 m deep, is characterized by a mixture of fine- to coarse-grained basin fill deposits. Groundwater storage to 400 m bls in the Detrital Valley basin is estimated to be 9.8 km 3 . The basin geometry model for the Sacramento Valley basin consists of three subbasins: the Chloride, Golden Valley, and Dutch Flat subbasins. The Chloride subbasin, which is estimated to be 900 m deep, is characterized by fine- to coarse-grained basin fill deposits. In the Golden Valley subbasin, which is elongated north-south, and is estimated to be 1,300 m deep, basin fill includes fine-grained sedimentary deposits overlain by coarse-grained sedimentary deposits in much of the subbasin. The Dutch Flat subbasin is estimated to be 2,600 m deep, and well-log lithologic data suggest that the basin fill consists of interlayers of gravel, sand, and clay. Groundwater storage to 400 m bls in the Sacramento Valley basin is estimated to be 35.1 km 3 .

Arizona↗

Pre- and post-eruptive geochemical and isotopic fingerprints of rhyolites parental to volcano-sedimentary lithium brine and clay resources in the western USA & central Andes

Lithium is a high-demand, critical element used not only in lightweight rechargeable lithium-ion batteries, but also in nuclear applications and industries producing ceramics, aluminum, and medical products. It is extracted primarily from pegmatites and volcano-sedimentary brines and clays in arid, closed lacustrine or caldera basins. Lithium brines of the central Andean salars in the AltiplanoPuna Plateau contain around ~70% of the world’s lithium resources. In contrast, Clayton Valley, Nevada is the only current producer of lithium brines in the United States and accounts for ~6% of current global lithium production. Clayton Valley hosts a newly defined Li-clay resource where locally exposed rhyolite tuffs have been proposed as a lithium source. Identifying magma evolution processes and determining the importance of syn- and post-eruptive processes on the source, mobility, and distribution of lithium is an ongoing area of research. These two regions illustrate distinctive magmatic-tectonic regimes for volcano-sedimentary lithium enrichment and therefore represent ideal regions to explore the key geological processes critical to the enrichment of lithium resources.

Clayton Valley, Puna Plateau↗

Stratiform tourmalinites in metamorphic terranes and their geologic significance

Stratiform tourmalinites are significant minor rock types in many regional metamorphic terranes of the world. Tourmalinites are more widespread than previously recognized and are especially common in Proterozoic and early Paleozoic sequences dominated by clastic metasedimentary rocks. They consist of conformable layers made up primarily of quartz and abundant tourmaline, the latter typically exceeding 15% to 20% of rock volumes. A few tourmalinites display striking sedimentary structures such as graded bedding, cross-laminations, slump and flame structures, and rip-up clasts. These and other geologic features provide important constraints for assessing the origin of these rocks, and they suggest that tourmalinites form by the early diagenetic modification of a primary boron-rich chemical precipitate. Tourmalinites are significant in preserving a valuable record of unusual chemical and paleogeographic conditions in clastic sedimentary basins, and in their close association with a variety of stratabound mineral deposits.

Geology↗

Stratigraphy, structure, and geologic and coastal hazards in the Penuelas to Salinas area, southern Puerto Rico: A compendium of published literature

The Puerto Rico Electrical Power Authority has proposed construction of a pipeline to convey natural gas from the municipio of Peñuelas to the Aguirre thermoelectric power plant in the municipio of Salinas in southern Puerto Rico. To ensure that the geologic conditions along the possible routes do not represent a threat to the physical integrity of the natural gas pipeline, and thus comply with State and Federal regulations, the Puerto Rico Electrical Power Authority requested the U.S. Geological Survey to provide a synthesis of published literature of the geology of the coastal plain in the Peñuelas to Salinas area. The study area is located in part of the Southern Coastal Plain of Puerto Rico. In the area that extends from the municipio of Peñuelas eastward to the Laguna de las Salinas at Ponce, a distance of about 5 miles, the study area is underlain by middle Tertiary carbonate units. Eastward from the Laguna de las Salinas to the pipeline terminus at the Aguirre power plant in Salinas, a distance of about 30 miles, the terrain is underlain by fan-delta deposits of Quaternary age. The carbonate units and the fan-delta deposits are underlain by early Tertiary and older-age volcaniclastics with subordinate sedimentary rocks and lavas. The Great Southern Puerto Rico Fault Zone is the principal geologic structural feature in southern Puerto Rico. At present, the Great Southern Puerto Rico Fault Zone is considered largely quiescent, although it apparently is associated with minor earthquakes. There is no evidence of terrestrial, late Quaternary faulting within the Peñuelas to Salinas area. Seismic activity in this area mostly originates from extension zones of more distal shallow sources such as Mona Canyon to the northwest and the Anegada Trough northeast of the island of Puerto Rico. The magnitude of completeness of earthquakes in the study area ranges from 2.0 to 2.5. The seismic density for the southern coast including the study area is about 0.128 earthquakes per square mile, which is close to the average for southwestern Puerto Rico. The estimated maximum peak ground acceleration most likely to occur in the study area, due to shallow depth seismicity with 2 percent probability of exceedance in 50 years, is 9 feet per second squared, as obtained by modeling results. The estimated peak ground acceleration with 2 percent probability of exceedance in 50 years, due to deep seismicity is 7 feet per second squared. In Ponce, the probability of exceedance per year is higher than 0.1 for the peak ground acceleration values less than 1 that result from shallow depth seismicity sources such as the Mona Passage extension zone. The potential for liquefaction due to seismic activity may exist in areas near the coastline that have loosely to poorly consolidated sedimentary deposits and a water table close to or at the land surface. Slope failure susceptibility within the study area, due to rainfall and seismic activity, may be limited to the area that extends westward from Laguna de las Salinas to Peñuelas. In this area, foothills with slopes exceeding 10 degrees are close to the coastline and are underlain by clayey limestone and marls. In the remaining part of the study area, eastward from Laguna de las Salinas to Salinas, the land is either nearly flat or has a slope of less than 10 degrees; consequently, the susceptibility to landsliding (slope failure) caused by seismic activity and rainfall is considered to be minimal or nonexistent. Based on modeling results from a previous study, the estimated maximum inland extent of tsunami-induced flooding is 2,600 feet in the Laguna de las Salinas and Boca Chica, located in Ponce and Juana Díaz, respectively. Flooding about 3,000 and 2,800 feet from the coastline are estimated for areas near Punta Cabullón and Jobos areas, respectively. According to the modeling results, the estimated maximum runup of the tsunami-induced flooding ranges from 9 to 14 feet for the Boca Chica and Punta Cabullón areas, respectively.

Puerto Rico↗

Hydrocarbon potential, geologic hazards, and the technology, time-frame and infrastructure for exploration and development of the lower Cook Inlet, Alaska; a preliminary assessment

The Lower Cook Inlet Outer Continental Shelf (OCS) contains 5600 km 2 of submerged land in less than 200 m of water 150 to 350 km southwest of Anchorage, Alaska. This area could contain from 0.3 to 1.4 billion barrels of oil and from 0.6 to 2.7 trillion cubic feet of natural gas depending upon the statistical confidence level indicated. The known geology of this submerged area, is extrapolated to the offshore from onshore data. The sedimentary rocks are as old as Triassic and as young as Pleistocene. The Mesozoic strata include volcanic rocks, volcanoclastic and marine clastic sediments. Tertiary, rocks from which the oil and gas in Upper Cook Inlet are produced, consist of nonmarine conglomerate, sandstone, siltstone and coal. The potential objective section for oil and gas in this OCS area ranges from Middle Jurassic through the Tertiary. The present structural configuration of this area is a northeast trending trough filled with Tertiary sediments. The trough is flanked by two major faults, the Bruin Bay fault on the northwest and the Border Ranges fault on the southeast. Between these faults is the OCS area containing anticlinal structures and faults which may be traps for hydrocarbons. Potential geologic hazards are present in this area. It is an area of intense tectonism expressed as seismic activity (earthquakes) and volcanic eruptions which produce many natural disturbances including tsunamis. This distribution of soft sediment and other submarine features which relate to geologic hazards are only generally known.

Alaska↗

Geologic Cross Section D-D' Through the Appalachian Basin from the Findlay Arch, Sandusky County, Ohio, to the Valley and Ridge Province, Hardy County, West Virginia

Geologic cross section D-D' is the second in a series of cross sections constructed by the U.S. Geological Survey to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section D-D' provides a regional view of the structural and stratigraphic framework of the Appalachian basin from the Findlay arch in northwestern Ohio to the Valley and Ridge province in eastern West Virginia, a distance of approximately 290 miles. The information shown on the cross section is based on geological and geophysical data from 13 deep drill holes, several of which penetrate the Paleozoic sedimentary rocks of the basin and bottom in Mesoproterozoic (Grenville-age) crystalline basement rocks. This cross section is a companion to cross section E-E' (Ryder and others, 2008) that is located about 25 to 50 mi to the southwest. Although specific petroleum systems in the Appalachian basin are not identified on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and preferred migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on information shown on the cross section. Cross section D-D' lacks the detail to illustrate key elements of coal systems (such as paleoclimate, coal quality, and coal rank), but it does provide a general geologic framework (stratigraphic units and general rock types) for the coal-bearing section. Also, cross section D-D' may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste or for the sequestration of carbon dioxide.

Scientific Investigations Map↗

Geologic impacts of the 2004 Indian ocean tsunami on Indonesia, Sri Lanka, and the Maldives

The December 26, 2004 Indian Ocean tsunami was generated by a large submarine earthquake (magnitude ???9.1) with an epicenter located under the seafloor in the eastern Indian Ocean near northern Sumatra, Indonesia. The resulting tsunami was measured globally and had significant geologic impacts throughout the Indian Ocean basin. Observations of tsunami impacts, such as morphologic change, sedimentary deposits, and water-level measurements, are used to reconstruct tsunamogenic processes. Data from Sumatra, Sri Lanka, and the Maldives provide a synoptic view of tsunami characteristics from a wide range of coastal environments both near- and far-field from the tsunami origin. Impacts to the coast as a result of the tsunami varied depending upon the height of the wave at impact, orientation of the coast with regard to direction of wave approach, and local topography, bathymetry, geology, and vegetation cover. Tsunami deposits were observed in all the countries visited and can be generally characterized as relatively thin sheets (<80 cm), mostly of sand. ?? 2006 Gebru??der Borntraeger.

Conference Paper↗

Regional geochemical maps of the Tonopah 1 degree by 2 degrees Quadrangle, Nevada, based on samples of stream sediment and nonmagnetic heavy-mineral concentrate

This report is part of a series of geologic, geochemical, and geophysical maps of the Tonopah 1&deg; x 2&deg; quadrangle, Nevada, prepared during studies of the area for the Conterminous United States Mineral Assessment Program (CUSMAP). Included here are 21 maps showing the distributions of selected elements or combinations of elements. These regional geochemical maps are based on chemical analyses of the minus-60 mesh (0.25 mm) fraction of stream-sediment samples and the nonmagnetic heavy-mineral concentrate derived from stream sediment. Stream sediments were collected at 1,217 sites. Our geochemical studies of mineralized rock samples provide a framework for evaluating the results from stream sediments. The Tonopah 1&deg; x 2&deg; quadrangle comprises about 19,100 km 2 (7,450 mi 2 ) in west-central Nevada (fig. 1). Topography is typical of the Basin and Range province, consisting of angular mountain ranges separated by broad valleys that comprise about half the area. Topographic relief is generally about 1,000 m but in some places is more than 1,500 m. Most of the ranges have well-developed drainages in steep-walled canyons occupied by intermittent streams. The climate is semi-arid to arid. Pinon pine and juniper grow in most places at elevations above 2,100 m, and sagebrush is abundant at lower elevations. Major access is provided by U.S. Routes 6 and 95, and there are numerous county maintained gravel roads and unmaintained jeep trails. Bedrock geology of the Tonopah quadrangle is a complex mosaic of late Precambrian to Tertiary rocks juxtaposed by numerous thrust and high-angle faults. Useful geologic summaries can be found in reports by Ross (1961), Albers and Stewart (1972), Stewart and Carlson (1978), and Kleinhampl and Ziony (1985). Mineral prospects and mines occur in igneous, metamorphic, and sedimentary rocks of all ages, and mines are particularly abundant in the central and western parts of the quadrangle. The complex geology produces clasts of mixed lithology in alluvium in all drainage basins sampled in this study, and the numerous mines and prospects probably contaminate many drainages. The geochemical maps in this report are based on analytical results reported by Fairfield and others (1985), Hill and others (1986), and Siems and others (1986). These reports also describe the sample preparation and analytical methods and provide information on the location of the sample sites.

Nevada↗

Correlation of aeromagnetics and aeroradioactivity with lithology in the Spotsylvania area, Virginia

The U.S. Geological Survey made a detailed aeromagnetic and aeroradioactivity survey of 1050 sq mi of the Spotsylvania area in the Piedmont province of eastern Virginia. The study area consists of sixteen 7 1/2-minute quadrangles in Spotsylvania and adjoining counties, Virginia. East-west traverses were flown at a spacing of 1/2 mi and a flight elevation of 500 ft above ground. Geophysical data were compiled at a scale of 1:24,000, with a contour interval of 25 gammas for the magnetics and 25 counts per sec for the aeroradioactivity. The geophysical data were checked in the field, and a lithologic map was made. Correlation is excellent between geophysical data and lithologic units, and it is evident that good detailed aeromagnetic and aeroradioactivity maps can provide appreciable shortcuts in mapping an area such as the Piedmont, where lithologies are complex and outcrops sparse. Radioactivity highs are generally associated with magnetic lows, and more importantly, for purposes of geologic interpretation where the magnetic expression is flat and featureless, there is considerable radioactivity detail for geologic guidance. By using the two geophysical maps in conjunction, the geology between widely spaced outcrops can be worked out. In the study area, high radioactivity and low magnetic intensity characterize granitic rocks, many of which were not previously mapped. Mafic bodies are characterized by high magnetic values and low radioactivity. Much of the area is underlain by a sequence of metamorphosed sedimentary and volcanic rocks having alternating quartz-muscovite and magnetiferous chlorite-actinolite assemblages. © 1970, The Geological Society of America, Inc.

Virginia↗

Reconnaissance geology and geochronology of the Precambrian of the Granite Mountains, Wyoming

The Precambrian of the western part of the Granite Mountains contains a metamorphic complex of gneisses, schists and amphibolites that were derived through amphibolite-grade metamorphism from a sedimentary-volcanic sequence perhaps similar to that exposed in the southeastern Wind River Mountains. Whole-rock Rb-Sr dating places the time of metamorphism at 2925 ± 81 m.y. A high initial 87 Sr/ 86 Sr ratio of 0.7048 suggests that either the protoliths or the source terrane of the sedimentary component is several hundred million years older than the time of metamorphism. Following an interval of 300 ± 100 m.y. for which the geologic record is lacking or still undeciphered, the metamorphic complex was intruded by a batholith and satellite bodies of medium to coarse-grained, generally massive biotite granite and related pegmatite and aplite. The main body of granite is dated at 2602 ± 60 m.y. by the Rb-Sr method. Limited data suggest that diabase dikes were emplaced and nephrite veins were formed only shortly after intrusion of the granite. Emplacement of the granite at about 2600 m.y. ago appears to be related to a major period of regional granitic plutonism in the Precambrian of southern and western Wyoming. Granites sensu stricto that are dated between 2500 and 2600 m.y. occur in the Teton Range, the Sierra Madre, the Medicine Bow Mountains and the Laramie Range. This episode of granitic plutonism occurred some 50 to 100 m.y. later than the major tonalitic to granitic plutonism in the Superior Province of northern Minnesota and adjacent Ontario--the nearest exposed Precambrian W terrane that is analogous to the Wyoming Province. Initial 87 Sr/ 86 Sr ratios of some of the Wyoming granites are higher than expected if the rocks had been derived from juvenile magmas and it is likely that older crustal rocks were involved to some degree in the generation of these granites. Slightly to highly disturbed Rb-Sr and K-Ar mineral ages are obtained on rocks of the metamorphic complex arid on the granite. These ages range from about 2450 to 1450 m.y. and are part of a regional pattern of lowered mineral ages of Precambrian W rocks of southern Wyoming. A major discontinuity in these mineral ages occurs along a line extending from the northern Laramie Range, through the northern part of the Granite Mountains, to the southeastern Wind River Mountains. North of this line, Rb-Sr and K-Ar biotite ages are 2350 m.y. or greater whereas to the south, the biotite ages decrease drastically over a short distance to a common range of 1400-1600 m.y. We suggest that these lowered ages represent regional cooling below the 300° C isotherm as a consequence of uplift and erosion of the large crustal block occurring south of the age discontinuity. In this interpretation, the westerly-trending age discontinuity would be a zone of major crustal dislocation that resulted from vertical tectonics in late Precambrian X or early Precambrian Y time.

Wyoming↗

Integrated geophysical imaging of a concealed mineral deposit: a case study of the world-class Pebble porphyry deposit in southwestern Alaska

We combined aeromagnetic, induced polarization, magnetotelluric, and gravity surveys as well as drillhole geologic, alteration, magnetic susceptibility, and density data for exploration and characterization of the Cu-Au-Mo Pebble porphyry deposit. This undeveloped deposit is almost completely concealed by postmineralization sedimentary and volcanic rocks, presenting an exploration challenge. Individual geophysical methods primarily assist regional characterization. Positive chargeability and conductivity anomalies are observed over a broad region surrounding the deposit, likely representing sulfide minerals that accumulated during multiple stages of hydrothermal alteration. The mineralized area occupies only a small part of the chargeability anomaly because sulfide precipitation was not unique to the deposit, and mafic rocks also exhibit strong chargeability. Conductivity anomalies similarly reflect widespread sulfides as well as water-saturated glacial sediments. Mineralogical and magnetic susceptibility data indicate magnetite destruction primarily within the Cu-Au-Mo mineralized area. The magnetic field does not show a corresponding anomaly low but the analytic signal does in areas where the deposit is not covered by postmineralization igneous rocks. The analytic signal shows similar lows over sedimentary rocks outside of the mineralized area, however, and cannot uniquely distinguish the deposit. We find that the intersection of positive chargeability anomalies with analytic signal lows, indicating elevated sulfide concentrations but low magnetite at shallow depths, roughly delineates the deposit where it is covered only by glacial sediments. Neither chargeability highs nor analytic signal lows are present where the deposit is covered by several hundred meters of sedimentary and volcanic rocks, but a 3D resistivity model derived from magnetotelluric data shows a corresponding zone of higher conductivity. Gravity data highlight geologic features within the deposit, including shallow diorite sills that locally contain higher-grade mineralization. The results thus show ways in which an integrated survey approach might be used to distinguish zones of potentially economic mineralization.

Alaska↗