Search USGS⌕ Search

SEARCH · Search USGS

Results for “Mechanics of Materials”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS1982

Production and decomposition of forest litter fall on the Apalachicola River flood plain, Florida

Measurements of litter fall (leaves and other particulate organic material) and leaf decomposition were made on the bottom-land hardwood swamp of the Apalachicola River flood plain in 1979-80. Litter fall was collected monthly from nets located in 16 study plots. The plots represented five forest types in the swamp and levee areas of the Apalachicola River flood plain. Forty-three species of trees, vines, and other plants contributed to the total litter fall, but over 90 percent of the leaf material originated from 12 species. Nonleaf material comprised 42 percent of the total litter fall. Average litter fall was determined to be 800 grams per square meter per year, resulting in an annual deposition of 360,000 metric tons of organic material in the 454-square-kilometer flood plain. The levee communities have lower tree biomass but higher tree diversity than swamp communities. The levee vegetation, with lower tree biomass, produces slightly more litter fall per ground surface area than the swamp vegetation. The swamps are dominated by three genera: tupelo (Nyssa), cypress (Taxodium), and ash (Fraxinus). These genera account for over 50 percent of the total leaf fall in the flood plain but they are the least productive, on a weight-per-biomass basis, of any of the 12 major leaf producers. Decomposition rates of leaves from five common flood-plain tree species were measured using a standard leaf-bag technique. Leaf decomposition was highly species-dependent. Tupelo (Nyssa spp.) and sweetgum (Liquidambar styraciflua) leaves decomposed completely in 6 months when flooded by river water. Leaves of baldcypress (Taxodium distichum) and diamond-leaf oak (Quercus laurifolia) were much more resistant. Water hickory (Carya aquatica) leaves showed intermediate decomposition rates. Decomposition of all species was greatly reduced in dry environments. Carbon and biomass loss rates from the leaves were nearly linear over a 6-month period, but nitrogen and phosphorus leaching was nearly complete within 1 month. Much of the organic substance may be recycled in the forest ecosystem, but annual flooding of the river provides an important mechanism for mobilization of the litter-fall products.

Florida↗
USGS1996

The roles of organic matter in the formation of uranium deposits in sedimentary rocks

Because reduced uranium species have a much smaller solubility than oxidized uranium species and because of the strong association of organic matter (a powerful reductant) with many uranium ores, reduction has long been considered to be the precipitation mechanism for many types of uranium deposits. Organic matter may also be involved in the alterations in and around tabular uranium deposits, including dolomite precipitation, formation of silicified layers, iron-titanium oxide destruction, dissolution of quartz grains, and precipitation of clay minerals. The diagenetic processes that produced these alterations also consumed organic matter. Consequently, those tabular deposits that underwent the more advanced stages of diagenesis, including methanogenesis and organic acid generation, display the greatest range of alterations and contain the smallest amount of organic matter. Because of certain similarities between tabular uranium deposits and Precambrian unconformity-related deposits, some of the same processes might have been involved in the genesis of Precambrian unconformity-related deposits. Hydrologic studies place important constraints on genetic models of various types of uranium deposits. In roll-front deposits, oxidized waters carried uranium to reductants (organic matter and pyrite derived from sulfate reduction by organic matter). After these reductants were oxidized at any point in the host sandstone, uranium minerals were reoxidized and transported further down the flow path to react with additional reductants. In this manner, the uranium ore migrated through the sandstone at a rate slower than the mineralizing ground water. In the case of tabular uranium deposits, the recharge of surface water into the ground water during flooding of lakes carried soluble humic material to the water table or to an interface where humate precipitated in tabular layers. These humate layers then established the chemical conditions for mineralization and related alterations. In the case of Precambrian unconformity-related deposits, free thermal convection in the thick sandstones overlying the basement rocks carried uranium to concentrations of organic matter in the basement rocks.

Ore Geology Reviews↗
USGS1977

Surficial and applied surficial geology of the Belchertown Quadrangle, Massachusetts

Till and stratified drift overlie maturely dissected topography in the Belchertown quadrangle, an area that straddles the New England Upland and Connecticut Valley Lowland in central Massachusetts. Lower Paleozoic, massive quartzo-feldspathic gneiss, quartzite and schist of the Pelham dome and Devonian granodiorite and quartz diorite of the Belchertown intrusive complex are in contact with Triassic arkosic fanglomerate and basalt along a lengthy normal fault separating the New England Upland from the Connecticut Valley Lowland. The orientation of striae, roches moutonnees, and streamline ridges indicate that the last Wisconsinian glacier advanced generally south 12? east. This glacier removed several meters of rock from the upland and an unknown larger quantity from the preglacial valley of the Connecticut River. Till is thin in the uplands, but several tens of feet of drift overlie bedrock in the lowland. Three lithic facies of sandy, clast-rich, non-compact, subarkosic till derived from the three major source rocks rest on bedrock or on highly weathered, compact, clast-poor, fissile probably older till. The mean for all upper till is 69.6% sand, 21.7% silt, and 8.8% clay; lower till consists of 48% sand, 23% silt and 29% clay. Mud-rich, compact, sparsely stony till in drumlins in and along the flank of the Connecticut Valley Lowland is composed of 51.5% sand, 28% silt, and 20.5% clay. Upper tills are facies equivalent deposits of the youngest Wisconsinian drift. Lower till is compact deeply weathered, jointed and stained suggesting it is correlative with other lower till in New England deposited by an earlier Wisconsinian glacier. Drumlin till may be a facies equivalent of a lower till or a mud-rich upper till derived from earlier glaciolacustrine deposits. Upper and lower till of the Belchertown quadrangle is texturally similar to other New England upper and lower tills to which they are equivalent. Both tills are interpreted as lodgment till derived from similar bedrock terrane by two different glaciers. The older glacier incorporated mud-rich saprolite producing a fine grained till, while the younger glacier eroded fresh bedrock or a thin regolith produced by mechanical weathering. During stagnation zone retreat of the last glacier, stratified drift was deposited by melt water in, on, alongside or down valley from stagnant ice. The absence of stratified drift along upland divides indicates that stagnation did not begin till large nunataks were emergent. Kame terraces, kame deltas, and ice channel fillings indicate that melt water flowed along stagnant ice and emptied into temporary proglacial lakes. As downwasting progressed, water was able to drain at lower elevation into expanding lakes, the last of which merged with northward-expanding proglacial Lake Hitchcock in the Connecticut Valley. Initial melt water drainage to the southeast was followed by drainage to the southwest to the ancestral Chicopee River. With the opening of the Narrows, Lake Hitchcock expanded northward and eastward to form the Amherst embayment into which melt water from the eastern uplands drained. Sand and gravel overlying varves in the Amherst embayment was deposited in late-glacial Lake Lawrence, which coalesced with equivalent Lake Hadley through cols between drumlins in the Connecticut Valley Lowland. Deglaciation of the Belchertown quadrangle probably occurred in a span of about 100 years in the interval 12,000 to 12,500 years B.P. Unconsolidated sediments of the Belchertown quadrangle are summarized as to their geologic and geotechnical properties for land use planning. Drift as it influences groundwater flow, yield, and quality and as a construction material is assessed. Some environmental degradation has occurred from the indiscriminant disposal of liquid and solid waste as well as injudicious use of road salt.

Open-File Report↗
USGS1960

Evaporation control research, 1955-58

One hundred fifty-two compounds and compositions of matter were screened as potential evaporation retardants. The homologous straight-chain fatty alkanols are considered the best materials for retardants. Several methods of application of the alkanols to the reservoir surface were investigated. Although wick-type drippers for the application of liquids and cage rafts for the application of solids appear to be the most promising methods from an economic standpoint, both methods have serious disadvantages. Considerable study was given to reducing biochemical oxidation of the evaporation retardants. Copper in several forms was found adequate as a bacteriostatic agent but posed a potential hazard because of its toxicity. Many other bactericides that were tested were also toxic. Two sets of large-scale field tests have been completed and several others are still in progress. On the larger reservoirs, the reduction of evaporation was not more than 20 percent under the prevailing conditions and the application procedure used. Three major practical problems remain; namely, the effects and action of wind on the monofilm, the effects of biochemical oxidation, and the most effective method of application. Fundamental problems remaining include the effects of various impurities, and the composition of the best evaporation retardant; the long-range effects of monofilms on the limnology of a reservoir, including the transfer of oxygen and carbon dioxide; toxicological aspects of all components of any evaporation-retardant composition, plus toxicology of any composition chosen for large-scale use; and further studies of the calorimetry and thermodynamics involved in the mechanism of evaporation and its reduction by a monofilm.

Water Supply Paper↗
USGS2012

Impact crater outflows on Venus: Morphology and emplacement mechanisms

Many of the 932 impact craters discovered by the Magellan spacecraft at Venus are associated with lobate flows that originate at or near the crater rim. They extend for several to several hundred kilometers from the crater, and they commonly have a strong radar backscatter. A morphologic study of all identifiable crater outflows on Venus has revealed that many individual flows each consist of two areas, defined by distinct morphologic features. These two areas appear to represent two stages of deposition for each flow. The part of the flow that is generally deposited closest to the crater tends to be on the downrange side of the crater, flows in the downrange direction, and it is interpreted to be a late-stage ejecta. In many cases, this proximal part of the flow is too thin to completely bury the large blocks in subjacent ejecta deposits. Dendritic channels, present in many proximal flows, appear to have drained liquid from the proximal part in the downhill direction, and they debouch to feed the outer part of the flows. This distal part flows downhill, fills small grabens, and is ponded by ridges, behavior that mimics that of volcanic lava flows. The meandering and dendritic channels and the relation of the distal flows to topography strongly suggest that the distal portion is the result of coalescence and slow drainage of impact melt from the proximal portion. Impact melt forms a lining to the transient crater and mixes turbulently with solid clasts, and part of this mixture may be ejected to form the proximal part of the flow during the excavation stage of crater development. A statistical study of the Venusian craters has revealed that, in general, large craters produced by impacts with relatively low incidence angles to the surface are more likely to produce flows than small craters produced by higher-angle impacts. The greater flow production and downrange focusing of the proximal flows with decreasing incidence angle indicate a strong control of the flows by the impactor flight direction, and a high downrange velocity imparted to the proximal flow material in lower angle impacts. On the Moon, small flows interpreted to be composed of impact melt are observed atop the ejecta of large, fresh craters; on Earth, melt-rich suevite deposits form the uppermost layer of ejecta of some fresh craters. These features, albeit much smaller, may be analogous to the flows on Venus. Numerical models have predicted that larger volumes of impact melt would be produced on Venus than on the cooler terrestrial bodies due to high atmospheric and target temperatures, perhaps 3 times the volume produced on the Moon for a given crater diameter.

Journal of Geophysical Research E: Planets↗
USGS2022

Museum genomics provide evidence for persistent genetic differentiation in a threatened seabird species in the Western Atlantic

Connectivity among wildlife populations facilitates exchange of genetic material between groups. Changes to historical connectivity patterns resulting from anthropogenic activities can therefore have negative consequences for genetic diversity, particularly for small or isolated populations. DNA obtained from museum specimens can enable direct comparison of temporal changes in connectivity among populations, which can aid in conservation planning and contribute to understanding of population declines. However, museum DNA can be degraded and only available in low quantities, rendering it challenging for use in population genomic analyses. Applications of genomic methodologies such as targeted sequencing address this issue by enabling capture of shared variable sites, increasing quantity and quality of recovered genomic information. We used targeted sequencing of Ultra-conserved Elements (UCEs) to evaluate potential changes in connectivity and genetic diversity of roseate terns ( Sterna dougallii ) with a breeding distribution in the Northwestern Atlantic and the Caribbean. Both populations experienced range contractions and population declines due to anthropogenic activity in the 20 th century, which has the potential to alter historical connectivity regimes. Instead, we found that the two populations were differentiated historically as well as contemporaneously, with little evidence of migration between them for either time period. We also found no evidence for temporal changes in genetic diversity, although these interpretations may have been limited due to sequencing artifacts caused by the degraded nature of the museum samples. Population structuring in migratory seabirds is typically reflective of low rates of divergence and high connectivity among geographically segregated subpopulations. Our contrasting results suggest the potential presence of ecological mechanisms driving population differentiation, and highlight the value of targeted sequencing on DNA derived from museum specimens to uncover long-term patterns of genetic differentiation in wildlife populations.

Integrative and Comparative Biology↗
USGS2013

Thermokarst and thaw-related landscape dynamics -- an annotated bibliography with an emphasis on potential effects on habitat and wildlife

Permafrost has warmed throughout much of the Northern Hemisphere since the 1980s, with colder permafrost sites warming more rapidly (Romanovsky and others, 2010; Smith and others, 2010). Warming of the near-surface permafrost may lead to widespread terrain instability in ice-rich permafrost in the Arctic and the Subarctic, and may result in thermokarst development and other thaw-related landscape features (Jorgenson and others, 2006; Gooseff and others, 2009). Thermokarst and other thaw-related landscape features result from varying modes and scales of permafrost thaw, subsidence, and removal of material. An increase in active-layer depth, water accumulation on the soil surface, permafrost degradation and associated retreat of the permafrost table, and changes to lake shores and coastal bluffs act and interact to create thermokarst and other thaw-related landscape features (Shur and Osterkamp, 2007). There is increasing interest in the spatial and temporal dynamics of thermokarst and other thaw-related features from diverse disciplines including landscape ecology, hydrology, engineering, and biogeochemistry. Therefore, there is a need to synthesize and disseminate knowledge on the current state of near-surface permafrost terrain. The term "thermokarst" originated in the Russian literature, and its scientific use has varied substantially over time (Shur and Osterkamp, 2007). The modern definition of thermokarst refers to the process by which characteristic landforms result from the thawing of ice-rich permafrost or the melting of massive ice (van Everdingen, 1998), or, more specifically, the thawing of ice-rich permafrost and (or) melting of massive ice that result in consolidation and deformation of the soil surface and formation of specific forms of relief (Shur, 1988). Jorgenson (2013) identifies 23 distinct thermokarst and other thaw-related features in the Arctic, Subarctic, and Antarctic based primarily on differences in terrain condition, ground-ice volume, and heat and mass transfer processes. Typical Arctic thermokarst landforms include thermokarst lakes, collapsed pingos, sinkholes, and pits. Thermokarst is differentiated from thermal erosion, which refers to the erosion of the land surface by thermal and mechanical processes (Mackay, 1970; van Everdingen, 1998). Typical thermal erosional features include thermo-erosional gullies. Thermal abrasion is further differentiated from thermokarst and thermal erosion by association with the reworking of ocean, river, and lake bluffs (Are, 1988). Typical thermo-abrasion features include erosional niches at the base of bluffs. Thermal denudation is another distinct term that refers to the effect of incoming solar energy on the thaw of frozen slopes and permafrost bodies that subsequently become transported downhill by gravity (Shur and Osterkamp, 2007). Active layer detachment slides and thaw slumps are typical thermal denudation features. Shur and Osterkamp (2007) noted that these various transport processes may occur together with thermokarst or in instances that would not be considered thermokarst. This compilation of references regarding thermokarst and other thaw-related features is focused on the Arctic and the Subarctic. References were drawn from North America as well as Siberia. English-language literature mostly was targeted, with 167 references annotated in version 1.0; however, an additional 28 Russian-language references were taken from Shur and Osterkamp (2007) and are provided at the end of this document. This compilation may be missing key references and inevitably will become outdated soon after publication. We hope that this document, version 1.0, will serve as the foundation for a comprehensive compilation of thermokarst and permafrost-terrain stability references, and that it will be updated continually over the coming years.

Open-File Report↗
USGS1999

Magmatic interactions as recorded in plagioclase phenocrysts of Chaos Crags, Lassen Volcanic Center, California

The silicic lava domes of Chaos Crags in Lassen Volcanic National Park contain a suite of variably quenched, hybrid basaltic andesite magmatic inclusions. The inclusions represent thorough mixing between rhyodacite and basalt recharge liquids accompanied by some mechanical disaggregation of the inclusions resulting in crystals mixing into the rhyodacite host preserved by quenching on dome emplacement. 87Sr/86Sr ratios (~0.7037-0.7038) of the inclusions are distinctly lower than those of the host rhyodacite (~0.704-0.7041), which are used to fingerprint the origin of mineral components and to monitor the mixing and mingling process. Chemical, isotopic, and textural characteristics indicate that the inclusions are hybrid magmas formed from the mixing and undercooling of recharge basaltic magma with rhyodacitic magma. All the host magma phenocrysts (biotite, plagioclase, hornblende and quartz crystals) also occur in the inclusions, where they are rimmed by reaction products. Compositional and strontium isotopic data from cores of unresorbed plagioclase crystals in the host rhyodacite, partially resorbed plagioclase crystals enclosed within basaltic andesite inclusions, and partially resorbed plagioclase crystals in the rhyodacitic host are all similar. Rim 87Sr/86Sr ratios of the partially resorbed plagioclase crystals in both inclusions and host are lower and close to those of the whole-rock hybrid basaltic andesite values. This observation indicates that some crystals originally crystallized in the silicic host, were partially resorbed and subsequently overgrown in the hybrid basaltic andesite magma, and then some of these partially resorbed plagioclase crystals were recycled back into the host rhyodacite. Textural evidence, in the form of sieve zones and major dissolution boundaries of the resorbed plagioclase crystals, indicates immersion of crystals into a hotter, more calcic magma. The occurrence of partially resorbed plagioclase together with plagioclase microlites and olivine crystals reflects disaggregation of inclusions and mingling of this material into the silicic host. These processes are commonplace in some orogenic magma systems and may be elucidated by isotopic microsampling and analysis of the plagioclases crystallizing from them.

Journal of Petrology↗
USGS2020

The future of landslides’ past—A framework for assessing consecutive landsliding systems

Landslides often happen where they have already occurred in the past. The potential of landslides to reduce or enhance conditions for further landsliding has long been recognized and has often been reported, but the mechanisms and spatial and temporal scales of these processes have previously received little specific attention. Despite a preponderance of qualitative and anecdotal evidence, there has been limited analysis. As a result, there is little consensus on the meaning of terms such as landslide repetition, recurrence, and reactivation. This source of confusion is evident when such terms are also used to describe systems where landsliding is prevalent but unrelated to landslide history. Recent findings, partly based on a rare multi-temporal landslide inventory for an area in Italy, show that the impacts of earlier landslides affect a substantial fraction of landslides, that landslides following earlier landslides differ from those that do not, and that accounting for the effect of previous landslides can improve susceptibility assessments. These findings await confirmation in other landslide prone landscapes but show that consecutive landsliding deserves more attention, which requires consistent terminology. No such terminology is presently available, and we therefore propose it in this manuscript. We use the term 'uncorrelated landsliding' to describe situations where landslides are common, but where a correlation with environmental variables such as terrain steepness is not implied. We propose 'correlated landsliding' to describe situations where landslides are common and correlations with environmental variables exist, and 'path-dependent landsliding' to describe situations where causal relations exist between consecutive landslides, for instance when landslides occur at the scarp of previous landslides. These are situations where past landslides impact future landslides. Within the path-dependent category, we distinguish three subcategories based on the spatial distance between earlier and later landslides: 'reactivation' or 'continuation' if essentially the same material recommences or continues to slide, 'local activation' if an earlier slide causes changes in a local hillslope that cause a later slide, and 'remote activation' if an earlier slide causes changes elsewhere in the landscape that cause a later landslide. We use this proposed set of terms to outline some prominent knowledge gaps and potential research questions.

Landslides↗
USGS1969

Theoretical basis of the borehole deepening method of absolute stress measurement

Knowledge of the initial state of stress in rocks provides a key to the solution of many problems in rock mechanics. The initial state of stress is part of the basic data required for rational design of structures in rock, since its redistribution when engineering activities are conducted is a primary load on the rock portion of the engineering system. Knowledge of initial and subsequent changes in the state of stress is also relevant in the study of active faults and crustal strain. The purposes of stress measurements are not generally well served by methods which disclose only one of the stress components at a point. Recently, interest has centered on overcoring methods which though expensive and difficult have the important advantage of yielding data on three or more stress components. In a previous paper, the authors introduced a new method--termed borehole deepening--based on measurement of the deformations that occur close to the bottom of a borehole when it is deepened by further drilling without overcoring . The proposed method is at a disadvantage when compared with overcoring procedures in that the quantities to be measured are somewhat smaller and the measuring environment is more hostile. However, the borehole deepening method presents three distinct advantages in comparison with overcoring procedures: (1) Using the same borehole, both the initial and the subsequent changes in the state of stress can be obtained by borehole deepening. Stress changes with time are very significant for stability monitoring as well as in predicting earthquake activity in regions close to known active faults and volcanoes. (2) The necessity of completely unloading a portion of the rock mass where deformation measurements are being carried out in the overcoring methods is ill-suited to nonlinearly elastic materials such as rocks. The borehole deepening method, on the other hand, is based on a change of stress from one level to another, rather than complete strain relief and is therefore less affected by nonlinear behavior. (3) Numerous stress measurements can be carried out economically in a single borehole. Thus, the regional stress distribution can be more readily obtained. Such information is considerably more significant than a single stress measurement at a point; considering the variability of rock masses and the magnitudes and direction of the stresses acting on them from one region to another and within the regions themselves, the reliability of a single measurement when extrapolated for the entire region is not very reasonable. This advantage of more numerous measurements makes it possible to predetermine the initial state of stress with confidence before actual access and construction. It also makes it possible to consider studying regional tectonic systems. Integrated regional measurements of in-situ state of stress would provide the necessary information for plotting the variation of crustal stresses; this would be of great interest in evaluating the several theories of orogenesis and in delineating tectonically active regions. This chapter is concerned with the theoretical basis for the borehole deepening method--the "software" for converting deformation measurements into stress values.

Conference Paper↗
USGS2009

Sediment characterization and dynamics in Lake Pontchartrain, Louisiana

Lake Pontchartrain in southeastern Louisiana is the largest of several shallow estuaries that together cover over 15,000 km 2 . Wetlands, forests, and large urban areas surround the lake. Primary transport mechanisms of sediments to Lake Pontchartrain include urban runoff, major diversions of the Mississippi River, discharge from streams along the north and west shores, and tidal circulation. Sediments deposited in Lake Pontchartrain are subjected to resuspension and mixing by natural and human activities. Bioturbation and water turbulence throughout the lake are the major mixing agents, and mechanical shell dredging has reworked much of the lake bottom over the last century. Sediment characterization through direct sampling and geophysical surveys indicates that these processes continually rework the top meter of sediment. The lake receives discharge from roadways and industrial and agricultural sources. Contaminants from these sources accumulate in the lake sediments and are an important contributor to the degradation of the estuary. Decline in populations of various benthic organisms, such as shrimp and clams, has been documented in the lake. To characterize the health of this important estuary, the U.S. Geological Survey (USGS) conducted a comprehensive evaluation of the geology, geomorphology, coastal processes, and environmental condition of the Pontchartrain Basin from 1994 to 1997. This report presents an assessment of sediment distribution and quality using a multidisciplinary approach to characterize the influence of various physical and chemical parameters: nearsurface stratigraphy, major trace metal concentrations (Cu, Pb, Zn, and Ni), and short-lived radionuclides ( 210 Pb, 7 Be, and 137 Cs). The results are compared with water-circulation patterns to determine high-resolution sedimentation patterns in the lake. The data show a significant increase in trace metals in the top 1 m of lake sediments. Above this horizon, pollen analysis indicates a correlation with land clearing in the area, a proxy for increasing human development of the surrounding landscape and an increase in surface run-off. The data also show that the top meter of sediment undergoes frequent resuspension during high-energy circulation events and via circulation gyres in the lake. This regular turnover does not allow stratification of recently deposited sediments, restricting the sequestration of contaminated material that enters the lake.

Louisiana↗
USGS1988

Retardations in fault creep rates before local moderate earthquakes along the San Andreas fault system, central California

Records of shallow aseismic slip (fault creep) obtained along parts of the San Andreas and Calaveras faults in central California demonstrate that significant changes in creep rates often have been associated with local moderate earthquakes. An immediate postearthquake increase followed by gradual, long-term decay back to a previous background rate is generally the most obvious earthquake effect on fault creep. This phenomenon, identified as aseismic afterslip, usually is characterized by above-average creep rates for several months to a few years. In several cases, minor step-like movements, called coseismic slip events, have occurred at or near the times of mainshocks. One extreme case of coseismic slip, recorded at Cienega Winery on the San Andreas fault 17.5 km southeast of San Juan Bautista, consisted of 11 mm of sudden displacement coincident with earthquakes of ML=5.3 and ML=5.2 that occurred 2.5 minutes apart on 9 April 1961. At least one of these shocks originated on the main fault beneath the winery. Creep activity subsequently stopped at the winery for 19 months, then gradually returned to a nearly steady rate slightly below the previous long-term average. The phenomena mentioned above can be explained in terms of simple models consisting of relatively weak material along shallow reaches of the fault responding to changes in load imposed by sudden slip within the underlying seismogenic zone. In addition to coseismic slip and afterslip phenomena, however, pre-earthquake retardations in creep rates also have been observed. Onsets of significant, persistent decreases in creep rates have occurred at several sites 12 months or more before the times of moderate earthquakes. A 44-month retardation before the 1979 ML=5.9 Coyote Lake earthquake on the Calaveras fault was recorded at the Shore Road creepmeter site 10 km northwest of Hollister. Creep retardation on the San Andreas fault near San Juan Bautista has been evident in records from one creepmeter site for the past 5 years. Retardations with durations of 21 and 19 months also occurred at Shore Road before the 1974 and 1984 earthquakes of ML=5.2 and ML=6.2, respectively. Although creep retardation remains poorly understood, several possible explanations have been discussed previously. (1) Certain onsets of apparent creep retardation may be explained as abrupt terminations of afterslip generated from previous moderate-mainshock sequences. (2) Retardations may be related to significant decreases in the rate of seismic and/or aseismic slip occurring within or beneath the underlying seismogenic zone. Such decreases may be caused by changes in local conditions related to growth of asperities, strain hardening, or dilatancy, or perhaps by passage of stress-waves or other fluctuations in driving stresses. (3) Finally, creep rates may be lowered (or increased) by stresses imposed on the fault by seismic or aseismic slip on neighboring faults. In addition to causing creep-rate increases or retardations, such fault interactions occasionally may trigger earthquakes. Regardless of the actual mechanisms involved and the current lack of understanding of creep retardation, it appears that shallow fault creep is sensitive to local and regional effects that promote or accompany intermediate-term preparation stages leading to moderate earthquakes. A strategy for more complete monitoring of fault creep, wherever it is known to occur, therefore should be assigned a higher priority in our continuing efforts to test various hypotheses concerning the mechanical relations between seismic and aseismic slip. ?? 1988 Birkha??user Verlag.

Pure and Applied Geophysics PAGEOPH↗
USGS2018

Volcanic ash activates the NLRP3 inflammasome in murine and human macrophages

Volcanic ash is a heterogeneous mineral dust that is typically composed of a mixture of amorphous (glass) and crystalline (mineral) fragments. It commonly contains an abundance of the crystalline silica (SiO 2 ) polymorph cristobalite. Inhalation of crystalline silica can induce inflammation by stimulating the NLRP3 inflammasome, a cytosolic receptor complex that plays a critical role in driving inflammatory immune responses. Ingested material results in the assembly of NLRP3, ASC, and caspase-1 with subsequent secretion of the interleukin-1 family cytokine IL-1β. Previous toxicology work suggests that cristobalite-bearing volcanic ash is minimally reactive, calling into question the reactivity of volcanically derived crystalline silica, in general. In this study, we target the NLRP3 inflammasome as a crystalline silica responsive element to clarify volcanic cristobalite reactivity. We expose immortalized bone marrow-derived macrophages of genetically engineered mice and primary human peripheral blood mononuclear cells (PBMCs) to ash from the Soufrière Hills volcano as well as representative, pure-phase samples of its primary componentry (volcanic glass, feldspar, cristobalite) and measure NLRP3 inflammasome activation. We demonstrate that respirable Soufrière Hills volcanic ash induces the activation of caspase-1 with subsequent release of mature IL-1β in a NLRP3 inflammasome-dependent manner. Macrophages deficient in NLRP3 inflammasome components are incapable of secreting IL-1β in response to volcanic ash ingestion. Cellular uptake induces lysosomal destabilization involving cysteine proteases. Furthermore, the response involves activation of mitochondrial stress pathways leading to the generation of reactive oxygen species. Considering ash componentry, cristobalite is the most reactive pure-phase with other components inducing only low-level IL-1β secretion. Inflammasome activation mediated by inhaled ash and its potential relevance in chronic pulmonary disease was further evidenced in PBMC using the NLRP3 small-molecule inhibitor CP-456,773 (CRID3, MCC950). Our data indicate the functional activation of the NLRP3 inflammasome by volcanic ash in murine and human macrophages in vitro . Cristobalite is identified as the apparent driver, thereby contesting previous assertions that chemical and structural imperfections may be sufficient to abrogate the reactivity of volcanically derived cristobalite. This is a novel mechanism for the stimulation of a pro-inflammatory response by volcanic particulate and provides new insight regarding chronic exposure to environmentally occurring particles.

Frontiers in Immunology↗
USGS2017

Timescales of carbon turnover in soils with mixed crystalline mineralogies

Organic matter–mineral associations stabilize much of the carbon (C) stored globally in soils. Metastable short-range-order (SRO) minerals such as allophane and ferrihydrite provide one mechanism for long-term stabilization of organic matter in young soil. However, in soils with few SRO minerals and a predominance of crystalline aluminosilicate or Fe (and Al) oxyhydroxide, C turnover should be governed by chemisorption with those minerals. Here, we correlate mineral composition from soils containing small amounts of SRO minerals with mean turnover time (TT) of C estimated from radiocarbon ( 14 C) in bulk soil, free light fraction and mineral-associated organic matter. We varied the mineral amount and composition by sampling ancient soils formed on different lithologies in arid to subhumid climates in Kruger National Park (KNP), South Africa. Mineral contents in bulk soils were assessed using chemical extractions to quantify Fe oxyhydroxides and SRO minerals. Because of our interest in the role of silicate clay mineralogy, particularly smectite (2 : 1) and kaolinite (1 : 1), we separately quantified the mineralogy of the clay-sized fraction using X-ray diffraction (XRD) and measured 14 C on the same fraction. Density separation demonstrated that mineral associated C accounted for 40–70 % of bulk soil organic C in A and B1 horizons for granite, nephelinite and arid-zone gabbro soils, and > 80 % in other soils. Organic matter strongly associated with the isolated clay-sized fraction represented only 9–47 % of the bulk soil C. The mean TT of C strongly associated with the clay-sized fraction increased with the amount of smectite (2 : 1 clays); in samples with > 40 % smectite it averaged 1020 ± 460 years. The C not strongly associated with clay-sized minerals, including a combination of low-density C, the C associated with minerals of sizes between 2 µm and 2 cm (including Fe oxyhydroxides as coatings), and C removed from clay-sized material by 2 % hydrogen peroxide had TTs averaging 190 ± 190 years in surface horizons. Summed over the bulk soil profile, we found that smectite content correlated with the mean TT of bulk soil C across varied lithologies. The SRO mineral content in KNP soils was generally very low, except for the soils developed on gabbros under more humid climate that also had very high Fe and C contents with a surprisingly short, mean C TTs. In younger landscapes, SRO minerals are metastable and sequester C for long timescales. We hypothesize that in the KNP, SRO minerals represent a transient stage of mineral evolution and therefore lock up C for a shorter time. Overall, we found crystalline Fe-oxyhydroxides (determined as the difference between Fe in dithionate citrate and oxalate extractions) to be the strongest predictor for soil C content, while the mean TT of soil C was best predicted from the amount of smectite, which was also related to more easily measured bulk properties such as cation exchange capacity or pH. Combined with previous research on C turnover times in 2 : 1 vs. 1 : 1 clays, our results hold promise for predicting C inventory and persistence based on intrinsic timescales of specific carbon–mineral interactions.

SOIL↗
USGS2003

Use of an intact core and stable-metal isotopes to examine leaching characteristics of a fluvial tailings deposit

The upper Arkansas River south of Leadville, Colorado, USA, contains deposits of fluvial tailings from historical mining operations in the Leadville area. These deposits are possible non-point sources of acid and metal contamination to surface- and ground-water systems. We used stable-metal isotopes to help ascertain metal retention and release mechanisms that influence metal transport from the deposits to shallow ground-water systems. To accomplish this, we excavated an intact core from a small fluvial tailings deposit and performed laboratory column experiments to examine the amount of metals leaching through the core. Deionised water was continuously applied to the top of the core, and effluent was collected from the bottom of the core for a period of about two months. Three saturation conditions were used, including unsaturated, partially saturated, and fully saturated. Reducing conditions developed upon partial and complete saturation of the core. During the unsaturated leaching phase, core effluents were acidic (pH 2.8 - 3.5) and contained elevated metal concentrations. During a portion of the unsaturated leaching phase, stable-metal isotope spikes and conservative tracers were simultaneously applied to the top of the core. The isotopes provide a means to delineate metal behaviour within the core. During the unsaturated leaching phase, the isotope spikes did not exhibit breakthrough with simultaneously added conservative tracers. However, some of the stable-metal isotope spikes did break through when reducing conditions occurred in the core (during the partial- and completesaturation conditions). In this paper, we use Cd as an example of the utility of stable-metal isotopes in geochemical studies. In the case of Cd, after the core was partially saturated, the 111 Cd spike was released as evidenced by a change in the Cd isotope ratios in the effluent. This release continued during the fully saturated leaching phase, however, the total Cd concentration did not increase. These results suggest that the 111 Cd spike was retained inside the core during the unsaturated leaching phase, and only partially released as reducing conditions developed. Results from this core-leaching experiment indicate there is a large reservoir of water-soluble material within the fluvial tailings deposit, which yields elevated metal concentrations and high acidity, and which may degrade adjacent ground- and surface-water quality. Use of stable metal isotopes in this study facilitated the determination of different metal-retention processes, metal-release processes, and metal sources in the fluvial tailings deposit in response to changing geochemical conditions.

Conference Paper↗
USGS2002

Physical data of soil profiles formed on late Quaternary marine terraces near Santa Cruz, California

The marine terraces in and around Santa Cruz, California, represent a set of well-preserved terraces formed as a product of geology, sea level, and climate. A marine terrace begins as a wave cut platform. Eustatic sea level changes, seacliff erosion, and tectonic uplift work together to generate marine terraces. "When a wave-cut platform is raised (due to tectonic activity) above sea level and cliffed by wave action it becomes a marine terrace" (Bradley, 1957, p. 424). During glacial periods, eustatic sea level is estimated to have dropped by 150 meters (Fairbanks, 1989). Cliff retreat measured from aerial photographs between 1930 and 1980 vary from 0.0 to 0.2 m yr–1 (Best and Griggs, 1991). Estimates of uplift rates along the Santa Cruz coastline vary from 0.10 to 0.48 m kyr–1 (Bradley and Griggs, 1976; Weber and others, 1999). Uplift mechanisms include coseismic uplift associated both with a reverse component of slip on the steeply SW dipping Loma Prieta fault in the restraining bend of the San Andreas Fault and a small component of reverse slip on the steeply SE dipping San Gregorio fault (Anderson and Menking 1994). Previous work studying physical properties on these terraces include Pinney and others (in press) and Aniku (1986) and Bowman and Estrada (1980). Sedimentary deposits of the marine terraces are a mixture of terrestrial and marine sediments but generally consist of a sheet of marine deposits overlying the old platform and a wedge of nonmarine deposits banked against the old sea cliff (Bradley, 1957). Bedrock underlying the terraces in the Santa Cruz area is generally either Santa Margarita Sandstone or Santa Cruz Mudstone. The Santa Margarita Sandstone represents an upper Miocene, transgressive, tidally dominated marine-shelf deposit with crossbedded sets of sand and gravel and horizontally stratified and bioturbated invertebrate-fossils beds (Phillips, 1990). The siliceous Santa Cruz Mudstone, of late Miocene age, conformably overlies the Santa Margarita Sandstone. The Santa Cruz Mudstone is a thin to medium-bedded siliceous mudstone with nonsiliceous mudstone and siltstone and minor amounts of sandstone. The siliceous nature implies organic deposition in a quiescent, deep-water environment. Bedrock is mantled by 1–4 meters of medium to coarse-grained regressive beach sediment and fluvial deposits from the Ben Lomond Mountains. Terrace age increases with elevation above sea level, and weathering of primary minerals increases with age. The suite of soils formed on the terraces is referred to as a soil chronosequence. Soil chronosequences, important tools in characterizing natural weathering rates, are defined as a group of soils that differ in age and therefore in duration of weathering but have similar climatic conditions, vegetation, geomorphic position, and parent material (Jenny, 1941; Birkland, 1999). Soils are frequently useful indicators of geomorphic age (Muhs, 1982; Switzer and others, 1988) and are a function of pedogenic and/or eolian processes. Some aspects of soil development can be episodic but when viewed on large time scales can be perceived as continuous (Switzer and others, 1988). The age of the soil may be constrained by the age of the deposit, since soil formation generally commences when deposition has ceased (Birkland, 1999). Dating of the terraces provides an unprecedented opportunity to study weathering and soil-formation rates (Perg and others, 2001; Hanks and others, 1984; Bradley and Griggs, 1976; Bradley and Addicott, 1968; Bradley, 1956). Ages of the terraces recently dated by cosmogenic radionuclide are, starting with the youngest, 65, 92, 137, 139, and 226 k.y. (Perg and others, 2001). However, these ages are much younger than recent radiometric dates on mollusk shells (Muhs, U.S. Geological Survey, personal communication, 2002; Bradley and Addicott, 1968). For this study, soils were sampled on five terraces. Terrace one in the Lighthouse Field along Westcliff in Santa Cruz was the last site selected, and this report contains minimal data on this terrace. Sites on the second, third, and fourth terraces are located in Wilder Ranch, Santa Cruz, California. Site five is on private property north of Wilder Ranch. Careful consideration was taken in selecting field sites, choosing locations in a topographically flat area to avoid effects of erosion, and trying to keep parent material similar. This report contains physical properties of the soil profiles on four of the five marine terraces near Santa Cruz, California, excluding the youngest terrace in all tables except 6 and 7. Data includes field descriptions, bulk density, grain size analyses, weight percent magnetic fraction, and the soil development index. Soil properties are important when trying to understand the chemistry of a given profile or when comparing profiles. Grain size constrains the movement of water in a profile, thus controlling movement of chemicals and weathering rates. Bulk density is a useful property to calculate chemical inventory. Quantifying the magnetic fraction aids in understanding the Fe inventory for these soils. The soil development index is a semi-quantitative way to define the degree of development of a soil profile. This is a useful way to compare development of profiles for this chronosequence or compare the Santa Cruz terraces to a suit of other terraces or another chronosequence.

California↗
USGS1998

Poroelastic rebound along the Landers 1992 earthquake surface rupture

Maps of surface displacement following the 1992 Landers, California, earthquake, generated by interferometric processing of ERS-1 synthetic aperture radar (SAR) images, reveal effects of various postseismic deformation processes along the 1992 surface rupture. The large-scale pattern of the postseismic displacement field includes large lobes, mostly visible on the west side of the fault, comparable in shape with the lobes observed in the coseismic displacement field. This pattern and the steep displacement gradient observed near the Emerson-Camp Rock fault cannot be simply explained by afterslip on deep sections of the 1992 rupture. Models show that horizontal slip occurring on a buried dislocation in a Poisson's material produces a characteristic quadripole pattern in the surface displacement field with several centimeters of vertical motion at distances of 10–20 km from the fault, yet this pattern is not observed in the postseismic interferograms. As previously proposed to explain local strain in the fault step overs [ Peltzer et al ., 1996b], we argue that poroelastic rebound caused by pore fluid flow may also occur over greater distances from the fault, compensating the vertical ground shift produced by fault afterslip. Such a rebound is explained by the gradual change of the crustal rocks' Poisson's ratio value from undrained (coseismic) to drained (postseismic) conditions as pore pressure gradients produced by the earthquake dissipate. Using the Poisson's ratio values of 0.27 and 0.31 for the drained and undrained crustal rocks, respectively, elastic dislocation models show that the combined contributions of afterslip on deep sections of the fault and poroelastic rebound can account for the range change observed in the SAR data and the horizontal displacement measured at Global Positioning System (GPS) sites along a 60-km-long transect across the Emerson fault [ Savage and Svarc , 1997]. Using a detailed surface slip distribution on the Homestead Valley, Kickapoo, and Johnson Valley faults, we modeled the poroelastic rebound in the Homestead Valley pull apart. A Poisson's ratio value of 0.35 for the undrained gouge rocks in the fault zone is required to account for the observed surface uplift in the 3.5 years following the earthquake. This large value implies a seismic velocity ratio V p /V s of 2.1, consistent with the observed low V s values of fault zone guided waves at shallow depth [ Li et al ., 1997]. The SAR data also reveal postseismic creep along shallow patches of the Eureka Peak and Burnt Mountain faults with a characteristic decay time of 0.8 years. Coseismic, dilatant hardening (locking process) followed by post-seismic, pore pressure controlled fault creep provide a plausible mechanism to account for the decay time of the observed slip rate along this section of the fault.

Journal of Geophysical Research B: Solid Earth↗
USGS2013

Application of a hydrodynamic and sediment transport model for guidance of response efforts related to the Deepwater Horizon oil spill in the Northern Gulf of Mexico along the coast of Alabama and Florida

U.S. Geological Survey (USGS) scientists have provided a model-based assessment of transport and deposition of residual Deepwater Horizon oil along the shoreline within the northern Gulf of Mexico in the form of mixtures of sand and weathered oil, known as surface residual balls (SRBs). The results of this USGS research, in combination with results from other components of the overall study, will inform operational decisionmaking. The results will provide guidance for response activities and data collection needs during future oil spills. In May 2012 the U.S. Coast Guard, acting as the Deepwater Horizon Federal on-scene coordinator, chartered an operational science advisory team to provide a science-based review of data collected and to conduct additional directed studies and sampling. The goal was to characterize typical shoreline profiles and morphology in the northern Gulf of Mexico to identify likely sources of residual oil and to evaluate mechanisms whereby reoiling phenomena may be occurring (for example, burial and exhumation and alongshore transport). A steering committee cochaired by British Petroleum Corporation (BP) and the National Oceanic and Atmospheric Administration (NOAA) is overseeing the project and includes State on-scene coordinators from four States (Alabama, Florida, Louisiana, and Mississippi), trustees of the U.S. Department of the Interior (DOI), and representatives from the U.S. Coast Guard. This report presents the results of hydrodynamic and sediment transport models and developed techniques for analyzing potential SRB movement and burial and exhumation along the coastline of Alabama and Florida. Results from these modeling efforts are being used to explain the complexity of reoiling in the nearshore environment and to broaden consideration of the different scenarios and difficulties that are being faced in identifying and removing residual oil. For instance, modeling results suggest that larger SRBs are not, under the most commonly observed low-energy wave conditions, likely to move very far alongshore. This finding suggests that SRBs from one source location may not (outside of storm conditions) be redistributed to other up or down coast locations. This information can guide operational response decisions. In addition, because SRBs are less mobile compared with sand, they are likely to become buried and unburied under normal sand transport processes thereby lengthening the time SRBs may take to move onshore. The rate of onshore movement was not specifically addressed by this study, yet the results resolve the cross-shore domain and cross-shore variations in alongshore transport that are relevant to achieving the primary objectives. Furthermore, during infrequent events (for example, winter storms and severe meteorological events such as Hurricane Isaac of August 2012), energy is shown to be sufficient to move a greater range of SRB sizes and potentially expose and break up submerged oil mats. When SRBs do move alongshore, the models indicate that there are regions that are more conducive to accumulation of SRB material than others. Accumulation can occur where there are reversals and decelerations in alongshore currents and where forces created by shear stress drops below critical thresholds to maintain or initiate SRB movement. In addition, flow and SRB mobility patterns around inlets indicate patterns in hydrodynamic forces that influence redistribution of SRBs and the surface oil that mixed with sediment to form oil mats in the first place.

Alabama;Florida↗