Results for “Atlantic Geology” — Page 24

USGS2024

Assessing the vertical accuracy of digital elevation models by quality level and land cover

The vertical accuracy of elevation data in coastal environments is critical because small variations in elevation can affect an area’s exposure to waves, tides, and storm-related flooding. Elevation data contractors typically quantify the vertical accuracy of lidar-derived digital elevation models (DEMs) on a per-project basis to gauge whether the datasets meet quality and accuracy standards. Here, we collated over 5200 contractor elevation checkpoints along the Atlantic and Gulf of Mexico coasts of the United States that were collected for project-level analyses produced for assessing DEMs acquired for the U.S. Geological Survey’s Three-Dimensional Elevation Program. We used land cover data to quantify non-vegetated vertical accuracy and vegetated vertical accuracy statistics (overall and by point spacing bins) and assessed elevation error by land cover class. We found the non-vegetated vertical accuracy had an overall root mean square error of 6.9 cm and vegetated areas had a 95th percentile vertical error of 22.3 cm. Point spacing was generally positively correlated to elevation accuracy, but sample size limited the ability to interpret results from accuracy by land cover, particularly in wetlands. Based on the specific questions a researcher may be asking, use of literature or fieldwork could assist with enhancing error statistics in underrepresented classes.

Remote Sensing Letters↗

USGS1993

A guide to continent-ocean transect E-1: Adirondacks to Georges Bank

The geologic strip-map for Transect E-l cuts a swath from the Thousand Islands region on the New York-Ontario border to the Atlantic Ocean floor off Georges Bank (see Fig. 1). It includes portions of New York, Ontario and of all of the New England states. The western part, mainly in New York, belongs to the North American craton. The remainder of the onland portion, east of Logan's Line, belongs to the Appalachian Orogen. Southeastward from Logan's Line the transect crosses a series of distinctive terranes. Several of these terranes are believed to be exotic, and to have been accreted to the North American craton during the Paleozoic. Superposed on these are several grabens and half-grabens containing early Mesozoic sediments and mafic volcanics. There are also Mesozoic eruptive complexes of an alkalic nature cutting across the Appalachian Orogen from southern Quebec, across New England, and continuing as a chain of seamounts offshore. Cenozoic rocks are limited to a small, but significant occurrence near Brandon, Vermont (BL on Fig. 2) and a few occurrences in the Cape Cod region and on the adjacent islands in southeastern Massachusetts.

GSA's DNAG Continent-Ocean Transect Series↗

USGS2022

Linkage between mantle and crustal structures and its bearing on inherited structures in northwestern Scotland

Deep seismic reflection profiles in Scotland reveal mantle structures beneath a crust with a polyphase tectonic history that resulted in several generations of structures. Continuum mechanics suggests that coeval mantle and crustal structures must be kinematically linked. Inherited structures imply relative ages for the reflectors, ages that can be placed into the context of the geological history of the near-surface rocks of northern Scotland. Thus, some mantle reflectors are assigned Triassic ages related to the opening of the West Orkney and related marginal basins of the Atlantic Ocean. Other mantle reflectors are cut by late Caledonian structures associated with the Great Glen Fault Zone and therefore older than c. 400 Ma. Many of these structures also track the late Precambrian margin of Laurentia and may be related to either the opening (900–600 Ma) or closing (500–600 Ma) of the Iapetus Ocean. Some reflective structures may also be attributed to 1800–1700 Ma Laxfordian deformation that was part of a global-scale orogenic belt.

Journal of the Geological Society↗

USGS2024

Novel insights about petroleum systems from source and reservoir rock characterization, Cretaceous Deposits, Babouri-Figuil Basin, Northern Cameroon

The Babouri-Figuil Basin (BFB) is a frontier basin for petroleum in Cameroon. It belongs to the series of Cretaceous rift basins of the West and Central Rift System (WCARS), the origin of which is related to the opening of the South Atlantic. Within the same rift system, commercial hydrocarbon accumulations have been discovered in Chad, Sudan, Niger and, more recently, in Nigeria (Gongola Basin). The study of the geology of the BFB just recently received considerable attention, mainly because of its presumed hydrocarbon potential. In the pursuit of researching possible petroleum systems in the BFB, the current study provides a first look into the characterization of source and reservoir rock and its integration into a 2D lithostratigraphic model. The study was solely based on outcrop samples. Black shale and massive claystone are good to excellent hydrocarbon source rocks [e.g., up to 38 wt% total organic carbon (TOC), up to 943 mg/g hydrogen index, up to 85 m thickness, up to 20–30 km lateral extension], with moderate to high values of extractable organic matter (e.g., >10,000 ppm). Calcareous claystone, on the other hand, are poor source rocks [e.g., <0.20 wt% TOC]. The samples are thermally immature, except for those located close to volcanic intrusion at Golombe that have reached the threshold for oil generation (Tmax >435 °C, production index >0.1). The petrographic analysis of sandstone revealed that they are fine-grained to coarse-grained, poorly to moderately sorted, texturally and compositionally immature to submature, subarkosic to arkosic arenites. The main diagenetic processes that affected sandstones are as follows: moderate to intense compaction characterized by the development of long, concavo-convex, and sutured contacts between grains; cementation through calcite, iron oxide, and quartz cements; alteration of mica and feldspar grains; partial to complete dissolution of feldspar, mica, amphibole grains, and calcite cement; and the replacement of feldspar and mica grains by clay minerals. Alteration and dissolution increase the porosity of sandstone through the creation of secondary pores. However, mechanical compaction through the development of a pseudomatrix and cementation as pore-filling materials have significantly reduced the quality of sandstone beds as conventional petroleum reservoirs. Hence, the best reservoir-quality sandstones in the basin are generally located in the upper portion of the basin in terms of its lithostratigraphic model. They are the cleanest sandstones with the smallest amount of cement and the lowest ductile grain content (pseudomatrix), with a thickness that varies from 3 m to 120 m and a lateral extension of 20 km. The lithostratigraphic model of the basin is characterized by an extensive lacustrine environment that provided a thick sequence of organic-rich formations; sand deposited as extensive reservoirs sandwiched between shale/claystone beds; the development of stratigraphic traps through lateral facies change; and the widespread deposition of lacustrine and floodplain claystone that provide regional seals. The similarities between the Babouri-Figuil Basin and proven petroleum systems in other WCARS rift basins suggest that the basin may host at least one petroleum system where actively generating source rocks are present.

Babouri-Figuil Basin↗

USGS1991

E-4 Central Kentucky to the Carolina Trough

E-4 is one of eight Geodynamics transects that cross the Atlantic margin of North America between Georgia and Newfoundland. Five of the transects are in the United States and three are in Canada. Transect E-4, which is 110 km wide and more than 1,100 km long, extends from the stable North American craton just west of the Grenville front near Lexington, Kentucky southeastward across Cape Fear, North Carolina, on the Atlantic coast to oceanic crust east of the Blake Spur magnetic anomaly. Like all of the other U.S. Atlantic coast transects, it crosses Cambrian and Jurassic continental margins of North America as well as the Appalachian orogen. The display, based upon published information, portrays the geology, tectonic style and geophysical expression of this segment of the eastern North American continental margin and interprets its Phanerozoic history. The Decade of North American Geology 1983 geologic time scale (Palmer, 1983) is used throughout the display and text.

Book↗

USGS2025

The geology of Canadian potash: A critical mineral for feeding the world

Potash, potassium-bearing water-soluble salt, is the primary global economic source of potassium. Potash is recognized as a critical mineral in Canada as it is the largest source of potassium used in fertilizers. It is essential for global agricultural productivity and food security. Canada is the world’s largest potash exporter with vast deposits in the widely mined Prairie Evaporite of Saskatchewan, which formed in the epicontinental Elk Point Basin during the Middle Devonian. Potash is also found in the Windsor Group of Atlantic Canada where it formed in a series of tectonically active basins during the Mississippian that have undergone substantial post-depositional subsurface alteration and deformation. Potash deposits were mined in New Brunswick up until 2016. Both deposits are salt giants, recording times in the geologic record of extensive and long-lasting evaporite genesis under arid conditions in restricted seas. This paper reviews the geological and economic significance of Canadian potash, including (1) the genesis of each deposit, (2) diagenetic, erosional, and tectonic modification, and (3) exploration and mining in each basin. Underdeveloped regions, possible undiscovered resources, environmental considerations, and the importance of sustainable practices in light of climate change and socioeconomic risks are also addressed.

Facets↗

USGS1970

Surface water supply of the United States, 1961-65; Part 2. South Atlantic slope and eastern Gulf of Mexico, Volume 3. Basins from Apalachicola River to Pearl River

No abstract available.

Alabama, Florida, Georgia, Louisiana, Mississippi↗

USGS1994

Documentation of hydrochemical-facies data and ranges of dissolved-solids concentrations for the northern Atlantic Coastal Plain aquifer system, New Jersey, Delaware, Maryland, Virginia and North Carolina supplement to Professional paper 1404-L

Hydrochemical-facies data and ranges of dissolved- solids concentrations used to construct hydrochemical-facies maps and sections for U.S. Geological Survey Professional Paper 1404-L have not been previously published. In this report, the data are contained on a 3-1/2 high-density diskette in a file presented in American International Standard Code for Information Exchange (ASCII) format. The file requires about 0.2 megabyte of disk space on an IBM-compatible microcomputer using the MS-DOS operating system.

Delaware, Maryland, New Jersey, North Carolina, Vi↗

USGS1991

Oxygen-isotope exchange and mineral alteration in gabbros of the Lower Layered Series, Kap Edvard Holm Complex, East Greenland

Multiple intrusions of gabbros, mafic dikes, and syenites in the Kap Edvard Holm Complex gave rise to prolonged circulation of meteoric hydrothermal solutions and extreme isotope exchange and mineral alteration in the 3600-m-thick Lower Layered Series gabbros. In the Lower Layered Series, δ 18 O of plagioclase varies from +0.3‰ to -5.8‰, and it decreases with an increase in the volume of secondary talc, chlorite, and actinolite. In the same gabbros, pyroxenes have a more restricted range in δ 18 O, from 5.0‰ to 3.8‰ and values of δ 18 O pyroxene are independent of the abundance of secondary minerals, which ranges from 14% to 30%. These relations indicate that large amounts of water continued to flow through the rocks at temperatures of <500-600°C, altering the gabbros to assemblages of talc + chlorite + actinolite ± epidote ±albite and causing significant oxygen-isotope exchange in plagioclase, but not in pyroxene. The extensive low-temperature secondary mineralization and 18 O depletion of plagioclase in the Lower Layered Series are associated with the later emplacement of dikes and gabbros and syenites, which created new fracture systems and provided heat sources for hydrothermal fluid circulation. This produced subsolidus mineral alteration and isotope exchange in the Lower Layered Series that are distinct from those in the Skaergaard and Cuillin gabbros of the North Atlantic Tertiary province, but are similar to those observed in some oceanic gabbros.

Kap Edward Holm Complex↗

USGS2011

USGS science for the Nation's changing coasts; shoreline change assessment

The coastline of the United States features some of the most popular tourist and recreational destinations in the world and is the site of intense residential, commercial, and industrial development. The coastal zone also has extensive and pristine natural areas, with diverse ecosystems providing essential habitat and resources that support wildlife, fish, and human use. Coastal erosion is a widespread process along most open-ocean shores of the United States that affects both developed and natural coastlines. As the coast changes, there are a wide range of ways that change can affect coastal communities, habitats, and the physical characteristics of the coast?including beach erosion, shoreline retreat, land loss, and damage to infrastructure. Global climate change will likely increase the rate of coastal change. A recent study of the U.S. Mid-Atlantic coast, for example, found that it is virtually certain that sandy beaches will erode faster in the future as sea level rises because of climate change. The U.S. Geological Survey (USGS) is responsible for conducting research on coastal change hazards, understanding the processes that cause coastal change, and developing models to predict future change. To understand and adapt to shoreline change, accurate information regarding the past and present configurations of the shoreline is essential. A comprehensive, nationally consistent analysis of shoreline movement is needed. To meet this national need, the USGS is conducting an analysis of historical shoreline changes along open-ocean coasts of the conterminous United States and parts of Alaska and Hawaii, as well as the coasts of the Great Lakes.

Fact Sheet↗

USGS2025

The stratigraphic record of the mid-Piacenzian warm period on the Atlantic Coastal Plain

Anthropogenic climate change is an existential threat to our planet, impacting everything from the delicate balance of ecosystems to the availability of vital resources. Coastal regions, particularly vulnerable to the impacts of climate change due to rising sea levels and changing weather patterns, are experiencing increased erosion, flooding, and habitat loss. Understanding how coastal regions responded to past warming is crucial for developing effective adaptation and mitigation strategies. One past interval commonly used to examine and compare with climate model projections of near future conditions is the mid-Piacenzian Warm Period (MPWP) which occurred between*3.3 and 3.0 Ma. Here we review the stratigraphy of Atlantic Coastal Plain (ACP) sediments to determine the stratigraphic position of the MPWP by evaluating ages based upon existing and new planktic foraminifer occurrence data calibrated to the current geologic time scale (GTS2020). We identify geologic formations representing pre-, syn-, and post-MPWP environments. The Sunken Meadow Member of the Yorktown Formation in Virginia and North Carolina and the Wabasso beds in the subsurface of Georgia and Florida both fall within Planktic Foraminiferal Zone PL1 and represent pre-MPWP Pliocene deposits. Parts of the Yorktown Formation in southeastern Virginia and northern North Carolina, the Duplin Formation in North Carolina and South Carolina, and the Raysor Formation in South Carolina and Georgia, fall within Planktic Foraminiferal Zone PL3 and were deposited following a major regression associated with a global drop in sea level during Marine Isotope Stage (MIS) M2 and represent syn-MPWP deposits. Representing the immediately post-MPWP climate conditions (Planktic Foraminiferal Zone PL5) are the Chowan River, Bear Bluff, and Cypresshead Formations. This work provides a record of the MPWP from Georgia to Virginia and provides a stratigraphic framework within which the impacts of a profound global warming on the east coast of the United States can be assessed.

Georgia, North Carolina, South Carolina, Virginia↗

USGS1979

Geology and industrial mineral resources of the Macon-Gordon kaolin district, Georgia

The Macon-Gordon kaolin district is about 80 miles (130 km) southeast of Atlanta, Georgia. It extends across the boundary between, and includes parts of, the Piedmont and Atlantic Coastal Plain physiographic provinces. The rocks in the Piedmont are mainly intensely folded sericite schist and granite gneiss containing irregular masses of amphibolite and feldspathic biotite gneiss and scattered igneous intrusive rocks. Most of the crystalline rocks are thought to be of Paleozoic age, but some of the intrusive rocks may be younger. The crystalline rocks are cut by a major unconformity and are overlain by sedimentary formations ranging in age from Cretaceous to Miocene. The valuable kaolin deposits occur in the Cretaceous beds, undivided, and in the Huber Formation which is of Paleocene to middle Eocene age. The resources of kaolin in the district are estimated in millions of metric tons as follows: reserves, 100; subeconomic resources, 700 to 900; undiscovered resources, probably 700 to 1,000. In addition to kaolin, the leading mineral commodity mined in the district, crushed stone and sand are now being produced, and fuller's earth and a minor amount of limestone were formerly produced. The crushed stone is quarried from igneous rocks in the Piedmont province. The sand is washed from the Cretaceous beds, undivided. The fuller's earth was mined from the Twiggs Clay Member of the Barnwell Formation, and limestone was dug from the Tivola Limestone.

Georgia↗

USGS2022

Estimates of metals contained in abyssal manganese nodules and ferromanganese crusts in the global ocean based on regional variations and genetic types of nodules

Deep-ocean ferromanganese crusts and manganese nodules are important marine repositories for global metals. Interest in these minerals as potential resources has led to detailed sampling in many regions of the global ocean, allowing for updated estimates of their global extent. Here, we present global estimates of total tonnage as well as contained metal concentrations and tonnages for ferromanganese crusts and manganese nodules using the most extensive compilation of geochemical data collected to date, along with updated boundaries of regions of interest for these minerals. We present results from mean composition calculated in two ways: first, a global flat average of regional mean compositions, and second, a regionally weighted average that considers differences in chemistry among genetic types and/or oceanographic and geologic settings for these mineral occurrences. For nodules, we use the three genetic types: (1) hydrogenetic, typified by nodules from the West Pacific Nodule Field and Penrhyn Basin; (2) diagenetic, typified by nodules from the Peru Basin; (3) mixed hydrogenetic-diagenetic, typified by nodules from the Clarion–Clipperton Zone and the Central Indian Ocean Basin, and Atlantic Ocean regional type hydrogenetic nodules. All crusts considered here are of hydrogenetic origin, which we divide into seven regional types that reflect a combination of ocean basin and other source inputs. Crust types include Arctic Ocean, Atlantic Ocean, Indian Ocean, Continental Margin, Prime Crust Zone (PCZ), North Pacific (non PCZ), and South Pacific. Based on our areal estimates, we find that abyssal regions likely to contain hydrogenetic-type nodules are by far the most widespread in the global ocean (47% of total area), Atlantic Ocean (28%) are next, followed by mixed diagenetic-hydrogenetic (22%) and diagenetic (3%) types. For crusts, the Prime Crust Zone is the most extensive global region (27% of total area) followed by South Pacific (20%), Indian Ocean (18%), North Pacific (12%), Continental Margins (11%), Atlantic Ocean (10%), and Arctic Ocean (2%) types. The global total tonnage estimates that we calculated from this method are 21 × 10 10 dry tons for manganese nodules, within the range of previous estimates, and 93 × 10 10 dry tons for ferromanganese crusts, which is 4.5 times higher than the 20 × 10 10 dry tons reported by Hein et al. (2003). This geology and oceanography driven approach to marine mineral quantification contrasts with estimates typically carried out for terrestrial mineral resource deposits. Nevertheless, these estimates and the data that support them demonstrate that marine minerals are an impressive repository for global metals.

Book chapter↗

USGS2004

Sidescan sonar imagery and surficial geologic interpretation of the sea floor off Branford, Connecticut

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Connecticut Department of Environmental Protection (CT DEP), Figure 1 - Map of Study Areahas produced detailed geologic maps of the sea floor in Long Island Sound, a major East Coast estuary surrounded by the most densely populated region of the United States. These studies have built upon cooperative research between the USGS and the State of Connecticut that was initiated in 1982. The current phase of this research program is directed toward studies of sea-floor sediment distribution, processes that control sediment distribution, nearshore environmental concerns, and the relation of benthic community structures to the sea-floor geology. Anthropogenic wastes, toxic chemicals, and changes in land-use patterns resulting from residential, commercial, and recreational development have stressed the environment of the Sound, causing degradation and potential loss of benthic habitats (Koppelman and others, 1976; Long Island Sound Study, 1994). Detailed maps of the sea floor are needed to help evaluate the extent of adverse impacts and to help wisely manage resources in the future. Therefore, in a continuing effort to better understand Long Island Sound, we are constructing and interpreting sidescan sonar mosaics (complete-coverage acoustic images of the sea floor) within specific areas of special interest (Poppe and Polloni, 1998). The mosaic presented herein, which was produced during survey H11043 by NOAA 's Atlantic Hydrographic Branch, covers approximately 41.1 km 2 of the sea floor in north-central Long Island Sound off Branford, Connecticut. Shell bed provides shelter for juvenille skate.The mosaic and its interpretation serve many purposes, including: (1) defining the geological variability of the sea floor, which is one of the primary controls of benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats and associated infaunal community structures; and (3) providing a detailed framework for future research, monitoring, and management activities. The sidescan sonar mosaic also serves as a base map for subsequent sedimentological, geochemical, and biological observations, because precise information on environmental setting is important for selection of sampling sites and for appropriate interpretation of point measurements.

Connecticut↗

USGS2011

A Digital Hydrologic Network Supporting NAWQA MRB SPARROW Modeling--MRB_E2RF1

A digital hydrologic network was developed to support SPAtially Referenced Regression on Watershed attributes (SPARROW) models within selected regions of the United States. These regions correspond with the U.S. Geological Survey's National Water Quality Assessment (NAWQA) Program Major River Basin (MRB) study units 2, 3, 4, 5, and 7 (Preston and others, 2009). MRB2, covers the South Atlantic-Gulf and Tennessee River basins. MRB3, covers the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins. MRB4, covers the Missouri River basins. MRB5, covers the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins. MRB7, covers the Pacific Northwest River basins. The digital hydrologic network described here represents surface-water pathways (MRB_E2RF1) and associated catchments (MRB_E2RF1WS). It serves as the fundamental framework to spatially reference and summarize explanatory information supporting nutrient SPARROW models (Brakebill and others, 2011; Wieczorek and LaMotte, 2011). The principal geospatial dataset used to support this regional effort was based on an enhanced version of a 1:500,000 scale digital stream-reach network (ERF1_2) (Nolan et al., 2002). Enhancements included associating over 3,500 water-quality monitoring sites to the reach network, improving physical locations of stream reaches at or near monitoring locations, and generating drainage catchments based on 100m elevation data. A unique number (MRB_ID) identifies each reach as a single unit. This unique number is also shared by the catchment area drained by the reach, thus spatially linking the hydrologically connected streams and the respective drainage area characteristics. In addition, other relevant physical, environmental, and monitoring information can be associated to the common network and accessed using the unique identification number.

Report↗

USGS2011

A Digital Hydrologic Network Supporting NAWQA MRB SPARROW Modeling--MRB_E2RF1WS

A digital hydrologic network was developed to support SPAtially Referenced Regression on Watershed attributes (SPARROW) models within selected regions of the United States. These regions correspond with the U.S. Geological Survey's National Water Quality Assessment (NAWQA) Program Major River Basin (MRB) study units 2, 3, 4, 5, and 7 (Preston and others, 2009). MRB2, covers the South Atlantic-Gulf and Tennessee River basins. MRB3, covers the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins. MRB4, covers the Missouri River basins. MRB5, covers the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins. MRB7, covers the Pacific Northwest River basins. The digital hydrologic network described here represents surface-water pathways (MRB_E2RF1) and associated catchments (MRB_E2RF1WS). It serves as the fundamental framework to spatially reference and summarize explanatory information supporting nutrient SPARROW models (Brakebill and others, 2011; Wieczorek and LaMotte, 2011). The principal geospatial dataset used to support this regional effort was based on an enhanced version of a 1:500,000 scale digital stream-reach network (ERF1_2) (Nolan et al., 2002). Enhancements included associating over 3,500 water-quality monitoring sites to the reach network, improving physical locations of stream reaches at or near monitoring locations, and generating drainage catchments based on 100m elevation data. A unique number (MRB_ID) identifies each reach as a single unit. This unique number is also shared by the catchment area drained by the reach, thus spatially linking the hydrologically connected streams and the respective drainage area characteristics. In addition, other relevant physical, environmental, and monitoring information can be associated to the common network and accessed using the unique identification number.

Report↗

USGS2011

A Digital Hydrologic Network Supporting NAWQA MRB SPARROW Modeling--MRB_E2RF1WS

A digital hydrologic network was developed to support SPAtially Referenced Regression on Watershed attributes (SPARROW) models within selected regions of the United States. These regions correspond with the U.S. Geological Survey's National Water Quality Assessment (NAWQA) Program Major River Basin (MRB) study units 2, 3, 4, 5, and 7 (Preston and others, 2009). MRB2, covers the South Atlantic-Gulf and Tennessee River basins. MRB3, covers the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins. MRB4, covers the Missouri River basins. MRB5, covers the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins. MRB7, covers the Pacific Northwest River basins. The digital hydrologic network described here represents surface-water pathways (MRB_E2RF1) and associated catchments (MRB_E2RF1WS). It serves as the fundamental framework to spatially reference and summarize explanatory information supporting nutrient SPARROW models (Brakebill and others, 2011; Wieczorek and LaMotte, 2011). The principal geospatial dataset used to support this regional effort was based on an enhanced version of a 1:500,000 scale digital stream-reach network (ERF1_2) (Nolan et al., 2002). Enhancements included associating over 3,500 water-quality monitoring sites to the reach network, improving physical locations of stream reaches at or near monitoring locations, and generating drainage catchments based on 100m elevation data. A unique number (MRB_ID) identifies each reach as a single unit. This unique number is also shared by the catchment area drained by the reach, thus spatially linking the hydrologically connected streams and the respective drainage area characteristics. In addition, other relevant physical, environmental, and monitoring information can be associated to the common network and accessed using the unique identification number.

General Information↗

USGS1980

Maps showing geology and shallow structure of eastern Rhode Island Sound and Vineyard Sound, Massachusetts

This report presents results of marine studies conducted by the U.S. Geological Survey (USGS) during the summers of 1975 and 1976 in eastern Rhode Island Sound and Vineyard Sound (fig. 1) located off the southeastern coast of Massachusetts. The study was made in cooperation with the Massachusetts Department of Public Works and the New England Division of the U.S. Army Corps of Engineers. It covered an area of the Atlantic Inner Continental Shelf between latitude 41 deg 12' and 41 deg 33'N, and between longitude 70 deg 37' and 71 deg 15'W (see index map). Major objectives included assessment of sand and gravel resources, environmental impact evaluation both of offshore mining of these resources and of offshore disposal of solid waste and dredge spoil material, identification and mapping of the offshore geology, and determination of the geologic history of this part of the Inner Shelf. A total of 670 kilometers (km) of closely spaced high-resolution seismic-reflection profiles, 224 km of side-scan sonar data, and 16 cores totaling 90 meters (m) of recovered sediment, were collected during the investigation. This report is companion to geologic maps published for Cape Cod Bay (Oldale and O'Hara, 1975) and Buzzards Bay, Mass. (Robb and Oldale, 1977).

Massachusetts, Rhode Island↗