SEARCH · Search USGS

Results for “Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources

USGS2012

Cyclic biogeochemical processes and nitrogen fate beneath a subtropical stormwater infiltration basin

A stormwater infiltration basin in north–central Florida, USA, was monitored from 2007 through 2008 to identify subsurface biogeochemical processes, with emphasis on N cycling, under the highly variable hydrologic conditions common in humid, subtropical climates. Cyclic variations in biogeochemical processes generally coincided with wet and dry hydrologic conditions. Oxidizing conditions in the subsurface persisted for about one month or less at the beginning of wet periods with dissolved O 2 and NO 3 - showing similar temporal patterns. Reducing conditions in the subsurface evolved during prolonged flooding of the basin. At about the same time O 2 and NO 3 - reduction concluded, Mn, Fe and SO 4 2 - reduction began, with the onset of methanogenesis one month later. Reducing conditions persisted up to six months, continuing into subsequent dry periods until the next major oxidizing infiltration event. Evidence of denitrification in shallow groundwater at the site is supported by median NO 3 -–N less than 0.016 mg L -1 , excess N 2 up to 3 mg L -1 progressively enriched in δ 15 N during prolonged basin flooding, and isotopically heavy δ 15 N and δ 18 O of NO 3 - (up to 25&permil; and 15&permil;, respectively). Isotopic enrichment of newly infiltrated stormwater suggests denitrification was partially completed within two days. Soil and water chemistry data suggest that a biogeochemically active zone exists in the upper 1.4 m of soil, where organic carbon was the likely electron donor supplied by organic matter in soil solids or dissolved in infiltrating stormwater. The cyclic nature of reducing conditions effectively controlled the N cycle, switching N fate beneath the basin from NO 3 - leaching to reduction in the shallow saturated zone. Results can inform design of functionalized soil amendments that could replace the native soil in a stormwater infiltration basin and mitigate potential NO 3 - leaching to groundwater by replicating the biogeochemical conditions under the observed basin.

Florida↗

USGS2019

Multi-scale preferential flow processes in an urban streambed under variable hydraulic conditions

Spatially preferential flow processes occur at nested scales at the sediment-water interface (SWI), due in part to sediment heterogeneities, which may be enhanced in flashy urban streams with heavy road sand influence. However, several factors, including the flow-rate dependence of preferential hyporheic flow and discrete groundwater discharge zones are commonly overlooked in reach-scale models of groundwater/surface water exchange. Using a series of controlled-head tracer-injection experiments coupled with cm-scale geophysics within the highly reactive upper 30 cm of the hyporheic zone of an urban stream, we quantified the flow dependence of local less-mobile porosity volume, mass-transfer rate coefficient, and the resulting local residence time in the less-mobile pore space at three controlled downward fluid fluxes (0.8, 2, and 3 m/d). Experiments were performed in two adjacent streambed locations, representing different sediment bulk vertical permeability. Less-mobile porosity parameters were generally substantial and similar between the two streambed locations; though a more competent, thin, organic layer at ∼15 cm depth in one location strongly impacted tracer loading, flushing dynamics, and local residence times. Increased downward flux led to (1) a decrease in less-mobile porosity residence time in all experiments, and (2) an increase in less-mobile porosity fraction for most experiments. Additionally, at the larger stream reach-scale, surface electrodes for electrical resistivity measurement were installed along 22 m of the wetted stream channel. These surface electrode measurements were collected during a natural storm flow event, which revealed widespread, short-term, flushing (e.g. <3 h) of the hyporheic zone with stream water, followed by longer-term (e.g. >60 h) flushing of the SWI with riparian zone groundwater. Flow dependence of preferential hyporheic zone flowpaths, like in the controlled tracer experiments, was also observed in these reach-scale electrical resistivity tomography measurements. Our findings reveal that the spatial and temporal dependence of preferential flow processes create highly dynamic SWI conditions that will affect the physical and coupled biogeochemical functions of the SWI in urbanized, sand-impacted streams.

Journal of Hydrology↗

USGS2007

Spatial and temporal variability in oceanographic and meteorologic forcing along Central California and its implications on nearshore processes

In the past two decades, the understanding of the important large-scale phenomena (El Niño, upwelling, California current, etc) that drive physical, chemical, and biological processes along the US West Coast has greatly improved. However, the ability to predict the influence of annual and inter-annual events on a regional scale still remains limited. High-resolution hourly data from 6 National Oceanographic and Atmospheric Administration (NOAA) buoys deployed since the early 1980's off Central California were analyzed to improve our understanding of spatial and temporal variability of oceanographic and meteorologic forcing along the coastline. Seasonal to inter-annual trends in wave height, wave period, sea level barometric pressure, sea-surface temperature, and wind direction were identified, as were significant departures in these trends during El Niño and La Niña periods. The results suggest there are increasing wave heights and wave periods, decreasing sea level barometric pressures and variability in sea-surface temperatures, and increasingly variable winds off Central California between 1980 and 2002. The impact of these climatic trends on coastal physical, geological and biologic processes will also be addressed.

California↗

USGS2009

On selecting a prior for the precision parameter of Dirichlet process mixture models

In hierarchical mixture models the Dirichlet process is used to specify latent patterns of heterogeneity, particularly when the distribution of latent parameters is thought to be clustered (multimodal). The parameters of a Dirichlet process include a precision parameter ?? and a base probability measure G 0 . In problems where ?? is unknown and must be estimated, inferences about the level of clustering can be sensitive to the choice of prior assumed for ??. In this paper an approach is developed for computing a prior for the precision parameter ?? that can be used in the presence or absence of prior information about the level of clustering. This approach is illustrated in an analysis of counts of stream fishes. The results of this fully Bayesian analysis are compared with an empirical Bayes analysis of the same data and with a Bayesian analysis based on an alternative commonly used prior.

Journal of Statistical Planning and Inference↗

USGS2019

A process-based model of pre-eruption seismicity patterns and its use for eruption forecasting at dormant stratovolcanoes

Using long-term data sets, the eruptive size, timing and style can typically be successfully forecast for dormant volcanoes using current monitoring data and knowledge of precursory eruptive patterns. The USAID-USGS Volcano Disaster Assistance Program (VDAP) utilizes seismic data over multiple eruption cycles and across volcano types to successfully forecast eruption size, style and onset times, as well as changes within ongoing eruptions. From millions of seismic event observations, we show that seismic data, a proxy for rate-dependent strain changes in the magmatic system, combined with a process-based conceptual geologic model enables eruption forecasting, especially for stratovolcanoes dormant >20 years. We show that this model often works for some open systems, ones that sufficiently reseal to plug the conduit, and also where a deep intrusion occurs after phreatic or phreatomagmatic explosions have begun. This model is divided into four seismicity and geologic stages. We describe each of the four stages of seismicity in detail and how they relate to the ongoing geologic process of that stage: Stage 1. Deep intrusion and seismicity occurring at 10 to 40 + km depth below the volcanic edifice; Stage 2. Distal VT seismicity induced at distances from 2 to >30 km laterally from the summit by magma intruding into and inflating the upper-crustal magma storage region; Stage 3. Vent-clearing seismicity associated with the initial vent creation and clearing phase of eruptive activity. Stage 4. Repetitive event seismicity associated with the final ascent of magma from 2 km to the surface. We present 36 examples of this seismic progression from 26 volcanoes. We believe that this progression generally correlates with the magma flux and the eventual explosivity and is invaluable for forecasting eruptions.

Journal of Volcanology and Geothermal Research↗

USGS2004

Sedimentary processes of the lower Monterey Fan channel and channel-mouth lobe

The distribution of deposits, sediment transport pathways and processes on the lower Monterey Fan channel and channel-mouth lobe (CML) are studied through the integration of GLORIA and TOBI sidescan sonar data with 7-kHz subbottom profiler records and sediment cores for ground-truthing. The lower Monterey channel is characterised by an up to 30-m-deep channel with poorly developed levees and alternating muddy and silty muddy overbank deposits. The channel is discontinuous, disappearing where gradients are less than about 1:350. Ground-truthing of the large CML shows that the entire CML is characterised by widespread deposits of generally fine sand, with coarser sand at the base of turbidites. Sand is particularly concentrated in finger-like areas of low-backscatter intensity and is interpreted as the result of non-turbulent sediment-gravity flows depositing metres thick massive, fine sand. TOBI sidescan sonar data reveal recent erosional features in the form of scours, secondary channels, large flow slides, and trains of blocks at the distal end of the CML. Erosion is probably related to increasing gradient as the CML approaches Murray Fracture zone and to differential loading of sandy submarine fan deposits onto pelagic clays. Reworking of older flow slides by sediment transport processes on the lobe produces trains of blocks that are several metres in diameter and aligned parallel to the flow direction. ?? 2004 Elsevier B.V. All rights reserved.

Marine Geology↗

USGS2009

Sedimentation processes in a coral reef embayment: Hanalei Bay, Kauai

Oceanographic measurements and sediment samples were collected during the summer of 2006 as part of a multi-year study of coastal circulation and the fate of terrigenous sediment on coral reefs in Hanalei Bay, Kauai. The goal of this study was to better understand sediment dynamics in a coral reef-lined embayment where winds, ocean surface waves, and river floods are important processes. During a summer period that was marked by two wave events and one river flood, we documented significant differences in sediment trap collection rates and the composition, grain size, and magnitude of sediment transported in the bay. Sediment trap collection rates were well correlated with combined wave-current near-bed shear stresses during the non-flood periods but were not correlated during the flood. The flood's delivery of fine-grained sediment to the bay initially caused high turbidity and sediment collection rates off the river mouth but the plume dispersed relatively quickly. Over the next month, the flood deposit was reworked by mild waves and currents and the fine-grained terrestrial sediment was advected around the bay and collected in sediment traps away from the river mouth, long after the turbid surface plume was gone. The reworked flood deposits, due to their longer duration of influence and proximity to the seabed, appear to pose a greater long-term impact to benthic coral reef communities than the flood plumes themselves. The results presented here display how spatial and temporal differences in hydrodynamic processes, which result from variations in reef morphology and orientation, cause substantial variations in the deposition, residence time, resuspension, and advection of both reef-derived and fluvial sediment over relatively short spatial scales in a coral reef embayment.

Marine Geology↗

USGS2016

Decoupling processes and scales of shoreline morphodynamics

Behavior of coastal systems on time scales ranging from single storm events to years and decades is controlled by both small-scale sediment transport processes and large-scale geologic, oceanographic, and morphologic processes. Improved understanding of coastal behavior at multiple time scales is required for refining models that predict potential erosion hazards and for coastal management planning and decision-making. Here we investigate the primary controls on shoreline response along a geologically-variable barrier island on time scales resolving extreme storms and decadal variations over a period of nearly one century. An empirical orthogonal function analysis is applied to a time series of shoreline positions at Fire Island, NY to identify patterns of shoreline variance along the length of the island. We establish that there are separable patterns of shoreline behavior that represent response to oceanographic forcing as well as patterns that are not explained by this forcing. The dominant shoreline behavior occurs over large length scales in the form of alternating episodes of shoreline retreat and advance, presumably in response to storms cycles. Two secondary responses include long-term response that is correlated to known geologic variations of the island and the other reflects geomorphic patterns with medium length scale. Our study also includes the response to Hurricane Sandy and a period of post-storm recovery. It was expected that the impacts from Hurricane Sandy would disrupt long-term trends and spatial patterns. We found that the response to Sandy at Fire Island is not notable or distinguishable from several other large storms of the prior decade.

New York↗

USGS2021

Complex sedimentary processes in large coastal embayments and their potential for coastal morphological and paleo tropical cyclone studies: A case study from Choctawhatchee Bay Western Florida, U.S.A

Storminess and sea-level can both have a significant impact on landforms in cyclone-prone coastal regions, although much of our understanding comes from short-timescale modern observations. This study aims to understand the variability of sediment transport and deposition in the Choctawhatchee Bay/Santa Rosa Island in the northern Gulf of Mexico, establishing the dominant sediment transport processes and morphological response of the barrier system to long-term variations in storminess and rising sea-levels. Here, we study the spatial and temporal changes in physicochemical properties of the sedimentary record of Choctawhatchee Bay to examine the character and fidelity of records of storm impacts spanning the Holocene. Proxies for marine and terrestrial conditions in the cores situated closer to the present barrier (proximal) show that sedimentation in coastal areas and marine influence of the bay during the last ~8000 yrs. were mainly determined by barrier response to the Holocene transgression and changes in storminess. In contrast, sedimentation close to the landward shore was governed by terrigenous input. The correlation of grain size and terrigenous proxies with regional hurricane records indicates that hinterland erosion by the rainfall during hurricane events is likely the dominant terrigenous sediment transport mechanism in areas close to the landward shore of the bay. These results suggest that sediment archives in large coastal deposition environments are equally suitable for sea level and cyclone modulated coastal morphological studies and paleo tropical cyclone studies, depending on the location, selected with an understanding of sedimentation processes in the vicinity.

Florida↗

USGS2021

Oil and gas reclamation on US public lands: How it works and improving the process with land potential concepts

• There are three general stages of a well's life on US public land: 1) the permitting process to drill, 2) active extraction of fossil fuel resource, and 3) plugging and abandonment of well. • There is no national standard for oil and gas reclamation in the United States similar to mining and therefore current reclamation practices and standards fail to achieve long-term effectiveness across the western United States. • A reclaimed well pad's land potential is determined by 3 properties: static (e.g., climate), dynamic (e.g., soil stability), and process (e.g., water retention). • Understanding a reclaimed well pad's land potential enables federal land agencies to outline surface reclamation goals and requirements consistently and clearly. • Monitoring for land potential increases the capacity of the private industry to practice adaptive management by enabling companies to respond to plant community changes while maintaining long-term progress toward recovery.

Rangelands↗

USGS2019

Assessing beach and island habitat loss in the Chesapeake Bay and Delmarva coastal bay region, USA, through processing of Landsat TM and OLI imagery: A case study

Beaches and islands provide economic value to humans and critical habitat for breeding and foraging wildlife. These ecosystems, however, are being severely impacted by global climate change and sea level rise through increased erosion and frequency of inundation. The case study presented here aimed to document island loss in the Chesapeake Bay and Delmarva coastal bay region of the United States using image processing techniques within a GIS from 1986 to 2016. Satellite imagery from Landsat Thematic Mapper (TM) and Operational Land Imager (OLI) sensors were processed within ArcMap 10.5 to determine spatial and temporal trends in island and beach habitat. Calculation of unweighted Cohen’s Kappa showed that classified scenes were, on average, within the range of moderate agreement between the classified Landsat scenes and the validation imagery within Google Earth (0.539). Recommendations regarding existing beach habitat management and future supplementation were created based on these results. From 1986 to 2016, island area declined by over 1,200 hectares (ha) with agriculture/open field (all open vegetated spaces) declining by nearly 82% and beach, surprisingly, increasing nearly 2%. This study was the first to document Chesapeake Bay region-wide island loss beyond the mid-2000s. The accuracy of this study was limited slightly by the 30 m spatial resolution of the imagery used. This technique may be best suited for documenting trends on large islands and along the mainland coastline.

Maryland, Virginia↗

USGS2013

Pre-flight calibration and initial data processing for the ChemCam laser-induced breakdown spectroscopy instrument on the Mars Science Laboratory rover

The ChemCam instrument package on the Mars Science Laboratory rover, Curiosity, is the first planetary science instrument to employ laser-induced breakdown spectroscopy (LIBS) to determine the compositions of geological samples on another planet. Pre-processing of the spectra involves subtracting the ambient light background, removing noise, removing the electron continuum, calibrating for the wavelength, correcting for the variable distance to the target, and applying a wavelength-dependent correction for the instrument response. Further processing of the data uses multivariate and univariate comparisons with a LIBS spectral library developed prior to launch as well as comparisons with several on-board standards post-landing. The level-2 data products include semi-quantitative abundances derived from partial least squares regression. A LIBS spectral library was developed using 69 rock standards in the form of pressed powder disks, glasses, and ceramics to minimize heterogeneity on the scale of the observation (350–550 μm dia.). The standards covered typical compositional ranges of igneous materials and also included sulfates, carbonates, and phyllosilicates. The provenance and elemental and mineralogical compositions of these standards are described. Spectral characteristics of this data set are presented, including the size distribution and integrated irradiances of the plasmas, and a proxy for plasma temperature as a function of distance from the instrument. Two laboratory-based clones of ChemCam reside in Los Alamos and Toulouse for the purpose of adding new spectra to the database as the need arises. Sensitivity to differences in wavelength correlation to spectral channels and spectral resolution has been investigated, indicating that spectral registration needs to be within half a pixel and resolution needs to match within 1.5 to 2.6 pixels. Absolute errors are tabulated for derived compositions of each major element in each standard using PLS regression. Sources of errors are investigated and discussed, and methods for improving the analytical accuracy of compositions derived from ChemCam spectra are discussed.

Spectrochimica Acta Part B: Atomic Spectroscopy↗

USGS2007

Efficiency of conventional drinking-water-treatment processes in removal of pharmaceuticals and other organic compounds

Samples of water and sediment from a conventional drinking-water-treatment (DWT) plant were analyzed for 113 organic compounds (OCs) that included pharmaceuticals, detergent degradates, flame retardants and plasticizers, polycyclic aromatic hydrocarbons (PAHs), fragrances and flavorants, pesticides and an insect repellent, and plant and animal steroids. 45 of these compounds were detected in samples of source water and 34 were detected in samples of settled sludge and (or) filter-backwash sediments. The average percent removal of these compounds was calculated from their average concentration in time-composited water samples collected after clarification, disinfection (chlorination), and granular-activated-carbon (GAC) filtration. In general, GAC filtration accounted for 53% of the removal of these compounds from the aqueous phase; disinfection accounted for 32%, and clarification accounted for 15%. The effectiveness of these treatments varied widely within and among classes of compounds; some hydrophobic compounds were strongly oxidized by free chlorine, and some hydrophilic compounds were partly removed through adsorption processes. The detection of 21 of the compounds in 1 or more samples of finished water, and of 3 to 13 compounds in every finished-water sample, indicates substantial but incomplete degradation or removal of OCs through the conventional DWT process used at this plant.

Science of the Total Environment↗

USGS2020

Preferential elution of ionic solutes in melting snowpacks: Improving process understanding through field observations and modeling in the Rocky Mountains

The preferential elution of ions from melting snowpacks is a complex problem that has been linked to temporary acidification of water bodies. However, the understanding of these processes in snowpacks around the world, including the polar regions that are experiencing unprecedented warming and melting, remains limited despite being instrumental in supporting climate change adaptation. In this study, data collected from a snowmelt lysimeter and snowpits at meadow and forest-gap sites in a high elevation watershed in Colorado were combined with the PULSE multi-phase snowpack chemistry model to investigate the controls of meltwater chemistry and preferential elution. The snowdepth at the meadow site was 64% of that at the forest-gap site, and the snowmelt rate was greater there (meadow snowpit) due to higher solar irradiance. Cations such as Ca 2+ and NH 4 + "> 4+ were deposited mostly within the upper layers of both the meadow and forest-gap snowpacks, and acid anions such as NO 3 − "> 3− and SO 4 2 − "> 42− were more evenly distributed. The snow ion concentrations were generally greater at the forest-gap snowpit, except for NH 4 + "> 4+ , which indicates that wind erosion of wet and dry deposited ions from the meadow may have reduced concentrations of residual snow. Furthermore, at the forest-gap site, snow interception and scavenging processes such as sublimation, ventilation, and throughfall led to particular ion enrichment of Ca 2+ , Mg 2+ , K + , Cl − , SO 4 2 − "> 42− and NO 3 − "> 3− . Model simulations and observations highlight that preferential elution is enhanced by low snowmelt rates, with the model indicating that this is due to lower dilution rates and increased contact time and area between the percolating meltwater and the snow. Results suggest that low snowmelt rates can cause multiple early meltwater ionic pulses for ions subject to lower ion exclusion. Ion exclusion rates at the grain-size level have been estimated for the first time.

Colorado↗

USGS2001

Evidence and characteristics of hydrolytic disproportionation of organic matter during metasomatic processes

Petroleum-geochemical analyses of carbonaceous regionally metamorphosed rocks, carbonaceous rocks from ore deposits, and alkalic plutonic rocks from diverse settings, demonstrated the presence of very low to moderately low concentrations of solvent-extractable organic matter, this observation in spite of the fact that some of these rocks were exposed to extremely high metamorphic temperatures. Biomarker and ??13C analyses established that the extractable organic matter originated as sedimentary-derived hydrocarbons. However, the chemistry of the extractable bitumen has been fundamentally transformed from that found in sediment bitumen and oils. Asphaltenes and resins, as defined in the normal petroleum-geochemical sense, are completely missing. The principal aromatic hydrocarbons present in oils and sediment bitumens (especially the methylated naphthalenes) are either in highly reduced concentrations or are missing altogether, Instead, aromatic hydrocarbons typical of sediment bitumens and oils are very minor, and a number of unidentified compounds and oxygen-bearing compounds are dominant. Relatively high concentrations of alkylated benzenes are typical. The polar "resin" fraction, eluted during column chromatography, is the principal compound group, by weight, being composed of six to eight dominant peaks present in all samples, despite the great geologic diversity of the samples. These, and other, observations suggest that a strong drive towards equilibrium exists in the "bitumen." Gas chromatograms of the saturated hydrocarbons commonly have a pronounced hump in both the n-paraffins and naphthenes, centered near the C19 to C26 carbon numbers, and a ubiquitos minimum in the n-paraffin distribution near n-C12 to n-C14. Multiple considerations dictate that the bitumen in the samples is indigenous and did not originate from either surficial field contamination or from laboratory procedures. Our observations are consistent with the hydrolytic disproportion of organic matter (HDOM), in which water and organic matter, including hydrocarbons, easily exchange hydrogen or oxygen with one another under certain conditions (Helgeson et al., 1993). The process appears to take place via well-known organic-chemical redox reaction pathways and is most evident in open-fluid systems. The conclusion that HDOM took place in the analyzed samples, thus producing the chemistry of the extractable bitumen, is supported by numerous previously published organic-geochemical studies of metamorphic, volcanic, plutonic, and ore-deposit-related rocks by other investigators. HDOM is suggested as an unrecognized geologic agent of fundamental importance. The process appears to control major chemical reactions in diverse geologic environments including, but not limited to, petroleum geology and geochemistry, regional metamorphism, and base- and precious-metal ore deposition. Copyright ?? 2001 Elsevier Science Ltd.

Geochimica et Cosmochimica Acta↗

USGS2001

Processes controlling the episodic streamwater transport of atrazine and other agrichemicals in an agricultural watershed

Episodic streamwater transport of atrazine (a common agricultural herbicide) and nutrients has been observed throughout agricultural watersheds in the United States and poses a serious threat to the quality of its water resources. Catchment-scale atrazine and nutrient transport processes after agricultural application are still poorly understood, and predicting episodic streamwater composition remains an elusive goal. We instrumented a 1.2-km 2 agricultural catchment near Harrisonburg, Virginia, and examined streamwater, overland flow, soil water, groundwater, and rainfall during the summer of 1998. Storm chemographs demonstrated different patterns for constituents derived primarily from weathering (silica and calcium), compared to constituents derived primarily from early spring land applications (nitrate, atrazine, DOC, potassium, chloride, and sulfate). During storms, the concentrations of silica and calcium decreased, the atrazine response was variable, and the concentrations of nitrate, DOC, potassium, chloride, and sulfate increased; the elevated nitrate signal lagged several hours behind the other elevated constituents. Graphical and statistical analyses indicated a relatively stable spring-fed baseflow was modified by a mixture of overland flow and soil water. A rapid, short-duration overland-flow pulse dominated the streamflow early in the event and contributed most of the potassium, DOC, chloride, suspended sediment, and atrazine. A longer-duration soil–water pulse dominated the streamflow later in the event and contributed the nitrate as well as additional potassium, DOC, sulfate, and atrazine. The contributions to the episodic streamflow were quantified using a flushing model in which overland-flow and soil–water concentrations decreased exponentially with time during an episode. Flushing time constants for the overland-flow and soil–water reservoirs were calculated on a storm-by-storm basis using separate tracers for each time-variable reservoir. Initial component concentrations were estimated through regression analyses. Mass-balance calculations were used for flow separations and to predict the observed streamwater composition. Model forecasts indicated that reduced fertilizer and pesticide application (rather than elimination of overland-flow or soil–water contributions) was necessary to improve the episodic streamwater composition. This study provides important additional understanding of the catchment-scale processes by which land-applied pesticides and nutrients can move through agricultural systems.

Virginia↗

USGS2002

Influence of fluvial processes on the quaternary geologic framework of the continental shelf, North Carolina, USA

Digital, single-channel, high-resolution seismic reflection profiles were acquired from the insular continental shelf of North Carolina, USA along a data grid extending from Oregon Inlet northward 48 km to Duck, North Carolina and from the nearshore zone seaward approximately 28 km (total surveyed area= 1334 km2). These data were processed and interpreted to delineate principal reflecting horizons and develop a three-dimensional seismic stratigraphic framework for the continental shelf that was compared to stratigraphic data from the shoreward back-barrier (estuarine) and barrier island system. Six principal reflecting horizons (designated R0 through R5) were present within the upper 60 m of the shelf stratigraphic succession. Three-dimensional mapping of reflector R1 demonstrated its origin from fluvial incision of the continental shelf during an episode (or episodes) of lowered sea-level. Fluvial processes during development of reflector R1 were responsible for extensive reworking and re-deposition of sediment throughout most of the northern half of the study area. Five seismic stratigraphic units (designated S1 through S5) were tentatively correlated with depositional sequences previously identified from the North Carolina back-barrier (estuarine) and barrier island system. These five stratigraphic units span the Quaternary Period (S1 = early Holocene; S2 = 51-78 ka; S3 = 330-530 ka; S4 = 1.1-1.8 Ma; S5 = earliest Pleistocene). Unit S1 is composed of fine-grained fluvial/estuarine sediment that back-filled incised streams during early Holocene sea-level rise. The four other stratigraphic units (S2-S5) display tabular depositional geometries, low total relief, and thicken toward the east-southeast as their basal reflectors dip gently between 0.41 m km-1 (0.02??) and 0.54 m km-1 (0.03??). Knowledge of the three-dimensional subsurface stratigraphic architecture of the continental shelf enhances understanding of the development of shelf depositional successions and provides a framework for development of better Quaternary sea-level data, especially offshore North Carolina where such data are sparse. ?? 2002 Elsevier Science B.V. All rights reserved.

Marine Geology↗

USGS2000

Mercury mine drainage and processes that control its environmental impact

Mine drainage from mercury mines in the California Coast Range mercury mineral belt is an environmental concern because of its acidity and high sulfate, mercury, and methylmercury concentrations. Two types of mercury deposits are present in the mineral belt, silica-carbonate and hot-spring type. Mine drainage is associated with both deposit types but more commonly with the silica-carbonate type because of the extensive underground workings present at these mines. Mercury ores consisting primarily of cinnabar were processed in rotary furnaces and retorts and elemental mercury recovered from condensing systems. During the roasting process mercury phases more soluble than cinnabar are formed and concentrated in the mine tailings, commonly termed calcines. Differences in mineralogy and trace metal geochemistry between the two deposit types are reflected in mine drainage composition. Silica-carbonate type deposits have higher iron sulfide content than hot- spring type deposits and mine drainage from these deposits may have extreme acidity and very high concentrations of iron and sulfate. Mercury and methylmercury concentrations in mine drainage are relatively low at the point of discharge from mine workings. The concentration of both mercury species increases significantly in mine drainage that flows through and reacts with calcines. The soluble mercury phases in the calcines are dissolved and sulfate is added such that methylation of mercury by sulfate reducing bacteria is enhanced in calcines that are saturated with mine drainage. Where mercury mine drainage enters and first mixes with stream water, the addition of high concentrations of mercury and sulfate generates a favorable environment for methylation of mercury. Mixing of oxygenated stream water with mine drainage causes oxidation of dissolved iron(II) and precipitation of iron oxyhydroxide that accumulates in the streambed. Both mercury and methylmercury are strongly adsorbed onto iron oxyhydroxide over the pH range of 3.2-7.1 in streams impacted by mine drainage. The dissolved fraction of both mercury species is depleted and concentrated in iron oxyhydroxide such that the amount of iron oxyhydroxide in the water column reflects the concentration of mercury species. In streams impacted by mine drainage, mercury and methylmercury are transported and adsorbed onto particulate phases. During periods of low stream flow, fine-grained iron hydroxide sediment accumulates in the bed load of the stream and adsorbs mercury and methylmercury such that both forms of mercury become highly enriched in the iron oxyhydroxide sediment. During high-flow events, mercury- and methylmercury-enriched iron hydroxide sediment is transported into larger aquatic systems producing a high flux of bioavailable mercury. (C) 2000 Elsevier Science B.V.

Science of the Total Environment↗