Search USGS⌕ Search

SEARCH · Search USGS

Results for “Chemistry and Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources

Assessment of water resources and the potential effects from oil and gas development in the Bureau of Land Management Tri-County planning area, Sierra, Doña Ana, and Otero Counties, New Mexico

The U.S. Geological Survey (USGS), in cooperation with the Bureau of Land Management, conducted a study to assess the water resources and potential effects on the water resources from oil and gas development in the Tri-County planning area, Sierra, Doña Ana, and Otero Counties, New Mexico. Publicly available data were used to assess these resources and effects and to identify data gaps in the Tri-County planning area. The Tri-County planning area includes approximately 9.3 million acres and is within the eastern extent of the Basin and Range Province, which consists of mountain ranges and low elevation basins. Three specific areas of interest within the Tri-County planning area are the Jornada del Muerto, Tularosa Basin, and Otero Mesa, which is adjacent to the Salt Basin. Surface-water resources are limited in the Tri-County planning area, with the Rio Grande as the main perennial river flowing from north to south through Sierra and Doña Ana Counties. The Tularosa Creek is an important surface-water resource in the Tularosa Basin. The Sacramento River, which flows southeast out of the Sacramento Mountains, is an important source of recharge to aquifers in the Salt Basin. Groundwater resources vary in aquifer type, depth to water, and water quality. For example, the Jornada del Muerto, Tularosa Basin, and Salt Basin each have shallow and deep aquifer systems, and water can range from freshwater, with less than 1,000 milligrams per liter (mg/L) of total dissolved solids, to brine, with greater than 35,000 mg/L of total dissolved solids. Water quality in the Tri-County planning area is affected by the dissolution of salt deposits and evaporation which are common in arid regions such as southern New Mexico. The potential for oil and gas development exists in several areas within the Tri-County area. As many as 81 new conventional wells and 25 coalbed natural gas wells could be developed by 2035. Conventional oil and gas well construction in the Tri-County planning area is expected to require 1.53 acre-feet (acre-ft) (500,000 gallons) of water per well, similar to requirements in the nearby Permian Basin of New Mexico, while construction of unconventional wells is expected to require 7.3 acre-ft of water per well. Produced waters in the Permian Basin have high total dissolved solids, in the brackish to brine range. Data gaps identified in this study include the limited detailed data on surface-water resources, the lack of groundwater data in areas of interest, and the lack of water chemistry data related to oil and gas development issues. Surface waters in the Tri-County planning area are sparse; some streams are perennial, and most are ephemeral. A more detailed study of the ephemeral channels and their interaction with groundwater could provide a better understanding of the importance of these surface-water resources. Groundwater data used in this study are from the USGS National Water Information System, which does not have continuous water-level depth data at many of the sites in the Tri-County planning area. On Otero Mesa, no recurrent groundwater-level data are available at any one site. The water-quality data compiled in this study provide a good overview of the general chemistry of groundwater in the Tri-County planning area. To fully understand the groundwater resources, it would be helpful to have more wells in specific areas of interest for groundwater-level and water-quality measurements.

New Mexico↗

Ground-water models as a management tool in Florida

Highly sophisticated computer models provide powerful tools for analyzing historic data and for simulating future water levels, water movement, and water chemistry under stressed conditions throughout the ground-water system in Florida. Models that simulate the movement of heat and subsidence of land in response to aquifer pumping also have potential for application to hydrologic problems in the State. Florida, with 20 ground-water modeling studies reported since 1972, has applied computer modeling techniques to a variety of water-resources problems. Models in Florida generally have been used to provide insight to problems of water supply, contamination, and impact on the environment. The model applications range from site-specific studies, such as estimating contamination by wastewater injection at St. Petersburg, to a regional model of the entire State that may be used to assess broad-scale environmental impact of water-resources development. Recently, groundwater models have been used as management tools by the State regulatory authority to permit or deny development of water resources. As modeling precision, knowledge, and confidence increase, the use of ground-water models will shift more and more toward regulation of development and enforcement of environmental laws. (USGS)

Water-Resources Investigations Report↗

Study and interpretation of the chemical characteristics of natural water

The chemical composition of natural water is derived from many different sources of solutes, including gases and aerosols from the atmosphere, weathering and erosion of rocks and soil, solution or precipitation reactions occurring below the land surface, and cultural effects resulting from activities of man. Some of the processes of solution or precipitation of minerals can be closely evaluated by means of principles of chemical equilibrium including the law of mass action and the Nernst equation. Other processes are irreversible and require consideration of reaction mechanisms and rates. The chemical composition of the crustal rocks of the earth and the composition of the ocean and the atmosphere are significant in evaluating sources of solutes in natural fresh water. The ways in which solutes are taken up or precipitated and the amounts present in solution are influenced by many environmental factors, especially climate, structure and position: of rock strata, and biochemical effects associated with life cycles of plants and animals, both microscopic and macroscopic. Taken all together and in application with the further influence of the general circulation of all water in the hydrologic cycle, the chemical principles and environmental factors form a basis for the developing science of natural-water chemistry. Fundamental data used in the determination of water quality are obtained by the chemical analysis of water samples in the laboratory or onsite sensing of chemical properties in the field. Sampling is complicated by changes in composition of moving water and the effects of particulate suspended material. Most of the constituents determined are reported in gravimetric units, usually milligrams per liter or milliequivalents per liter. More than 60 constituents and properties are included in water analyses frequently enough to provide a basis for consideration of the sources from which each is generally derived, most probable forms of elements and ions in solution, solubility controls, expected concentration ranges and other chemical factors. Concentrations of elements that are commonly present in amounts less than a few tens of micrograms per liter cannot always be easily explained, but present information suggests many are controlled by solubility of hydroxide or carbonate or by sorption on solid particles. Chemical analyses may be grouped and statistically evaluated by averages, frequency distributions, or ion correlations to summarize large volumes of data. Graphing of analyses or of groups of analyses aids in showing chemical relationships among waters, probable sources of solutes, areal water-quality regimen, and water-resources evaluation. Graphs may show water type based on chemical composition, relationships among ions, or groups of ions in individual waters or many waters considered simultaneously. The relationships of water quality to hydrologic parameters, such as stream discharge rate or ground-water flow patterns, can be shown by mathematical equations, graphs, and maps. About 75 water analyses selected from the literature are tabulated to illustrate the relationships described, and some of these, along with many others that are not tabulated, are also utilized in demonstrating graphing and mapping techniques. Relationships of water composition to source rock type are illustrated by graphs of some of the tabulated analyses. Activities of man may modify water composition extensively through direct effects of pollution and indirect results of water development, such as intrusion of sea water in ground-water aquifiers. Water-quality standards for domestic, agricultural, and industrial use have been published by various agencies. Irrigation project requirements for water quality are particularly intricate. Fundamental knowledge of processes that control natural water composition is required for rational management of water quality.

Water Supply Paper↗

Study and interpretation of the chemical characteristics of natural water

The chemical composition of natural water is derived from many different sources of solutes, including gases and aerosols from the atmosphere, weathering and erosion of rocks and soil, solution or precipitation reactions occurring below the land surface, and cultural effects resulting from activities of man. Some of the processes of solution or precipitation of minerals can be closely evaluated by means of principles of chemical equilibrium including the law of mass action and the Nernst equation. Other processes are irreversible and require consideration of reaction mechanisms and rates. The chemical composition of the crustal rocks of the earth and the composition of the ocean and the atmosphere are significant in evaluating sources of solutes in natural fresh water. The ways in which solutes are taken up or precipitated and the amounts present in solution are influenced by many environmental factors, especially climate, structure and position: of rock strata, and biochemical effects associated with life cycles of plants and animals, both microscopic and macroscopic. Taken all together and in application with the further influence of the general circulation of all water in the hydrologic cycle, the chemical principles and environmental factors form a basis for the developing science of natural-water chemistry. Fundamental data used in the determination of water quality are obtained by the chemical analysis of water samples in the laboratory or onsite sensing of chemical properties in the field. Sampling is complicated by changes in composition of moving water and the effects of particulate suspended material. Most of the constituents determined are reported in gravimetric units, usually milligrams per liter or milliequivalents per liter. More than 60 constituents and properties are included in water analyses frequently enough to provide a basis for consideration of the sources from which each is generally derived, most probable forms of elements and ions in solution, solubility controls, expected concentration ranges and other chemical factors. Concentrations of elements that are commonly present in amounts less than a few tens of micrograms per liter cannot always be easily explained, but present information suggests many are controlled by solubility of hydroxide or carbonate or by sorption on solid particles. Chemical analyses may be grouped and statistically evaluated by averages, frequency distributions, or ion correlations to summarize large volumes of data. Graphing of analyses or of groups of analyses aids in showing chemical relationships among waters, probable sources of solutes, areal water-quality regimen, and water-resources evaluation. Graphs may show water type based on chemical composition, relationships among ions, or groups of ions in individual waters or many waters considered simultaneously. The relationships of water quality to hydrologic parameters, such as stream discharge rate or ground-water flow patterns, can be shown by mathematical equations, graphs, and maps. About 75 water analyses selected from the literature are tabulated to illustrate the relationships described, and some of these, along with many others that are not tabulated, are also utilized in demonstrating graphing and mapping techniques. Relationships of water composition to source rock type are illustrated by graphs of some of the tabulated analyses. Activities of man may modify water composition extensively through direct effects of pollution and indirect results of water development, such as intrusion of sea water in ground-water aquifiers. Water-quality standards for domestic, agricultural, and industrial use have been published by various agencies. Irrigation project requirements for water quality are particularly intricate. Fundamental knowledge of processes that control natural water composition is required for rational management of water quality.

Water Supply Paper↗

Study and interpretation of the chemical characteristics of natural water

The chemical composition of natural water is derived from many different sources of solutes, including gases and aerosols from the atmosphere, weathering and erosion of rocks and soil, solution or precipitation reactions occurring below the land surface, and cultural effects resulting from human activities. Broad interrelationships among these processes and their effects can be discerned by application of principles of chemical thermodynamics. Some of the processes of solution or precipitation of minerals can be closely evaluated by means of principles of chemical equilibrium, including the law of mass action and the Nernst equation. Other processes are irreversible and require consideration of reaction mechanisms and rates. The chemical composition of the crustal rocks of the Earth and the composition of the ocean and the atmosphere are significant in evaluating sources of solutes in natural freshwater. The ways in which solutes are taken up or precipitated and the amounts present in solution are influenced by many environmental factors, especially climate, structure and position of rock strata, and biochemical effects associated with life cycles of plants and animals, both microscopic and macroscopic. Taken together and in application with the further influence of the general circulation of all water in the hydrologic cycle, the chemical principles and environmental factors form a basis for the developing science of natural-water chemistry. Fundamental data used in the determination of water quality are obtained by the chemical analysis of water samples in the laboratory or onsite sensing of chemical properties in the field. Sampling is complicated by changes in the composition of moving water and by the effects of particulate suspended material. Some constituents are unstable and require onsite determination or sample preservation. Most of the constituents determined are reported in gravimetric units, usually milligrams per liter or milliequivalents per liter. More than 60 constituents and properties are included in water analyses frequently enough to provide a basis for consideration of the sources from which each is generally derived, the most probable forms of elements and ions in solution, solubilitycontrols, expected concentration ranges, and other chemical factors. Mechanisms that control concentrations of elements commonly present in amounts less than a few tens of micrograms per liter cannot always be easily ascertained, but present information suggests that many are controlled by solubility of their hydroxides or carbonates or by sorption on solid particles. Many dissolved organic compounds can now be specifically determined. Chemical analyses may be grouped and statistically evaluated by means, medians, frequency distributions, or ion correlations to summarize large volumes of data. Graphing of analyses or of groups of analyses aids in showing chemical relationships among water, probable sources of solutes, areal water-quality regimen, temporal and spatial variation, and water-resources evaluation. Graphs may show water type based on chemical composition, relationships among ions, or groups of ions in individual waters or many waters considered simultaneously. The relationships of water quality to hydrogeologic characteristics, such as stream discharge rate or ground-water flow patterns, can be shown by mathematical equations, graphs, and maps. About 80 water analyses selected from the literature are tabulated to illustrate the relationships described, and some of these, along with many others that are not tabulated, are also used in demonstrating graphing and mapping techniques. Relationships of water composition to source rock type are illustrated by graphs of some of the tabulated analyses. Human activities may modify water composition extensively through direct effects of pollution and indirect results of water development, such as intrusion of seawater in groundwater aquifers. Water-quality standards for domestic, agricultural, and industrial use have been published by various agencies. Irrigation project requirements for water quality are particularly intricate. Fundamental knowledge of processes that control natural-water composition is required for rational management of water quality.

Water Supply Paper↗

Geochemistry of water in the Fort Union Formation of the northern Powder River basin, southeastern Montana

Shallow water in the coal-bearing Fort Union Formation of southeastern Montana was investigated to provide a better understanding of the geochemistry. Springs, wells less than 200 feet deep, and wells greater then 200 feet deep were observed to have different water qualities. Overall, the ground water exists as two systems: a mosaic of shallow, chemically dynamic, and localized recharge-discharge cells superimposed on a deeper, chemically static regional system. Water chemistry is highly variable in the shallow system, whereas sodium and bicarbonate waters characterize the deeper system. Within the shallow system , springs, and wells less than 200 feet deep show predominantly sodium and sulfate enrichment processes from recharge to discharge. These processes are consistent with the observed aquifer mineralogy and aqueous chemistry. However, intermittent mixing with downward moving recharge waters or upward moving deeper waters, and bacterially catalyzed sulfate reduction, may cause apparent reversals in these processes. (USGS)

Open-File Report↗

Insights from fumarole gas geochemistry on the origin of hydrothermal fluids on the Yellowstone Plateau

The chemistry of Yellowstone fumarole gases shows the existence of two component waters, type MC, influenced by the addition of deep mantle fluid, and type CC, influenced by crustal interactions (CC). MC is high in 3 He/ 4 He (22 Ra) and low in 4 He/ 40 Ar (∼1), reflecting input of deep mantle components. The other water is characterized by 4 He concentrations 3–4 orders of magnitude higher than air-saturated meteoric water (ASW). These high He concentrations originate through circulation in Pleistocene volcanic rocks, as well as outgassing of Tertiary and older (including Archean) basement, some of which could be particularly rich in uranium, a major 4 He source. Consideration of CO 2 –CH 4 –CO–H 2 O–H 2 gas equilibrium reactions indicates equilibration temperatures from 170 °C to 310 °C. The estimated temperatures highly correlate with noble-gas variations, suggesting that the two waters differ in temperature. Type CC is ∼170 °C whereas the MC is hotter, at 340 °C. This result is similar to models proposed by previous studies of thermal water chemistry. However, instead of mixing the deep hot component simply with cold, meteoric waters we argue that addition of a 4 He-rich component, equilibrated at temperatures around 170 °C, is necessary to explain the range in fumarole gas chemistry.

Wyoming↗

Geochemical results from stream-water and stream-sediment samples collected in Colorado and New Mexico

Scientists from the U.S. Geological Survey are studying the relationship between watershed lithology and stream-water chemistry. As part of this effort, 60 stream-water samples and 43 corresponding stream-sediment samples were collected in 2010 and 2011 from locations in Colorado and New Mexico. Sample sites were selected from small to midsize watersheds composed of a high percentage of one rock type or geologic unit. Stream-water and stream-sediment samples were collected, processed, preserved, and analyzed in a consistent manner. This report releases geochemical data for this phase of the study.

Colorado;New Mexico↗

Chemical evolution and estimated flow velocity of water in the Trinity Aquifer, south-central Texas

Three permeable zones with varying lithology and water chemistry compose the Trinity aquifer, a principal source of water in the 5,500- square-mile study area in south-central Texas. The upper permeable zone locally yields small quantities of water to wells and was not included in this study. The middle permeable zone primarily is composed of limestone with minor amounts of dolostone. Terrigenous sand and marine limestone, with minor amounts of dolostone, are the principal lithologic units in the lower permeable zone. Dissolved solids concentrations range from 329 to 1,820 milligrams per liter in water samples from the middle permeable zone and from 518 to 3,030 milligrams per liter in water samples from the lower permeable zone. Principal hydrochemical facies in the middle permeable zone are calcium magnesium bicarbonate and calcium magnesium sulfate. Hydrochemical facies in ground-water samples from the lower permeable zone vary. Tritium concentrations as large as 5.3 tritium units in the southeastern part of the study area are indicative of relatively recent recharge. Results of a geochemical mass balance simulation along a flowpath in the middle permeable zone indicate a mass transfer of 4.25 millimoles per liter of dolomite dissolved, 5.74 millimoles per liter of gypsum dissolved, 0.46 millimole per liter of sodium chloride dissolved, 8.07 millimoles per liter of calcite precipitated, and 0.67 millimole per liter of calcium-for-sodium cation exchange between solid and aqueous phases. These results support dedolomitization as a principal chemical process in the middle permeable zone of the Trinity aquifer. Results of a simulation along a flowpath in the lower permeable zone indicate a mass transfer of 0.41 millimole per liter of dolomite dissolved, 0.001 millimole per liter of gypsum dissolved, 9.58 millimoles per liter of sodium chloride dissolved, 1.09 millimoles per liter of calcite precipitated, and 1.11 millimoles per liter of sodium-forcalcium cation exchange between solid and aqueous phases. Lower permeable zone processes indicate sodium chloride dissolution, dedolomitization, and cation exchange. Ground-water-flow velocities determined from adjusted carbon-14 ages, calculated using NETPATH, for selected flowpaths in the middle and lower permeable zones were about 1.7 feet per year and less than about 4.4 feet per year, respectively.

Texas↗

Environmental geochemistry of an epigenetic Pb-Zn-Ag deposit at the abandoned Cecilia mine, Puno region, Peru

The abandoned Cecilia Pb-Zn-Ag mine is located at the headwaters of the Lake Titicaca watershed in the Altiplano of Peru. The site is characterized by three months of high precipitation and nine months of limited precipitation. The environmental geochemical characterization of the abandoned mine was done to evaluate environmental risks at the site from mine wastes and mine drainage, and their potential for downstream impacts on water quality in Lake Titicaca. The approach included sampling of mine waste, water, and sediment. Composite mine waste samples were collected from six main piles (four tailings, two waste rock). The surface water was collected from (1) drainage from mine portals; (2) the Cecilia and Crucero rivers upstream of mine influences; (3) the impacted reach of the Cecilia River down to its confluence with the Crucero River; and (4) the Crucero River, which receives drainage from the Cecilia River. Sampling in the dry season did not identify seeps from the waste rock or tailings piles. This study documents the capacity of the site to generate acid mine drainage from the mine waste and underground workings. Mine waste has elevated concentrations of As (up to 883 mg/kg), Cu (up to 20,106 mg/kg), Pb (up to 16,716 mg/kg), and Zn (up to 11,937 mg/kg). Results for dissolved concentrations from leaching experiments on mine waste samples showed high leachability for As (0.001 to 0.95 mg/L), Cu (0.01 to 57.34 mg/L), Cd (0.001 to 1.13 mg/L), Fe (0.42 to 785 mg/L), Zn (0.01 to 91 mg/L), and Mn (0.05 to 279 mg/L) with an acidic pH (2.5 to 6.0). Water chemistry at the site varied on the basis of water type. The Cecilia and Crucero rivers had neutral pH and low concentrations of metals upstream of mine influences. In contrast, samples collected at the mine portal were highly acidic (pH 1.4 to 3.7) with high dissolved concentrations of Fe (up to 4,720 mg/L), Al (up to 400 mg/L), sulfate (up to 19,428 mg/L), As (up to 5.92 mg/L), Cd (up to 9.84 mg/L), Cu (up to 1.56 mg/L), Pb (up to 1.95 mg/L), and Zn (up to 4,065 mg/L), causing an increase in metal concentrations in the river downstream after mixing. Carbonate rocks in the watershed produce alkaline waters that neutralize acid drainage prior to its confluence with the Crucero River. Proposed remediation methods include capping mine waste to limit contact with rainwater and passive treatment of mine portal drainage.

Cecilia mine↗

Surficial geology of Shaver Hollow, Shenandoah National Park

At the request of Shenandoah National Park and the Department of Environmental Sciences at the University of Virginia, the US Geological Survey has completed an examination and map of the surficial deposits in Shaver Hollow. The work was carried out as part of the US Geological Survey - National Park Service cooperative agreement implemented in 1994. Shaver Hollow is a small, well defined drainage basin on the west slope of the Blue Ridge about 6.5 miles south of Thornton Gap and can be reached by trail from mile 37.9 on the Skyline Drive. The hollow is drained by the North Fork of Dry Run, and the watershed within the Shenandoah National park is only 2 square miles in area. The area has been the site of extensive investigations by faculty and students at the University of Virginia and by NPS scientists and investigators studying the interaction of atmosphere chemistry, water composition, and the biota of the hollow (Furman and others, written communication, 1997). Modeling of the chemistry of Dry Run surface water, based on atmospheric, biologic, and geologic data, has been attempted with limited success. Better understanding of the surficial deposits and the interaction of streams and springs with near surface materials is needed before more sophisticated models can be devised. Although the bedrock lithology was mapped at a small scale (1:62,000-scale; Gathright, 1976) no examination of the surficial deposits of the hollow was made. The description of deposits contained herein is based on field observations carried out in September - November, 1996. Also included with this report is a 1/12,000-scale map of the surficial geology of Shaver Hollow (figure 1).

Virginia↗

Impact of valley fills on streamside salamanders in southern West Virginia

Valley fills associated with mountaintop-removal mining bury stream headwaters and affect water quality and ecological function of reaches below fills. We quantified relative abundance of streamside salamanders in southern West Virginia during 2002 in three streams below valley fills (VFS) and in three reference streams (RS). We surveyed 36 10- × 2-m stream transects, once in summer and fall, paired by order and structure. Of 2,343 salamanders captured, 66.7% were from RS. Total salamanders (adults plus larvae) were more abundant in RS than VFS for first-order and second-order reaches. Adult salamanders had greater abundance in first-order reaches of RS than VFS. Larval salamanders were more abundant in second-order reaches of RS than VFS. No stream width or mesohabitat variables differed between VFS and RS. Only two cover variables differed. Silt cover, greater in VFS than RS first-order reaches, is a likely contributor to reduced abundance of salamanders in VFS. Second-order RS had more boulder cover than second-order VFS, which may have contributed to the higher total and larval salamander abundance in RS. Water chemistry assessments of our VFS and RS reported elevated levels of metal and ion concentrations in VFS, which can depress macroinvertebrate populations and likely affect salamander abundance. Valley fills appear to have significant negative effects on stream salamander abundance due to alterations in habitat structure, water quality and chemistry, and macroinvertebrate communities in streams below fills.

West Virginia↗

Reduction in drinking water arsenic exposure and health risk through arsenic treatment among private well households in Maine and New Jersey, USA

Over 2 million people in the United States (U.S.) drink water from private wells that contain arsenic (As) exceeding the U.S. Environmental Protection Agency (USEPA) Maximum Contaminant Level (MCL) of 10 micrograms per liter (μg/L). While there are a number of commercially available treatment technologies for removing As from drinking water, it is up to the private well households to decide whether to treat for As or not. However, how well existing treatment technologies perform in real world situations, and to what extent they reduce health risks, are not well understood. This study evaluates the effectiveness of household As treatment systems in southern-central Maine (ME, n=156) and northern New Jersey (NJ, n=94) and ascertains how untreated well water chemistry and other factors influence As removal. Untreated and treated water samples, as well as a treatment questionnaire, were collected. Most ME households in this study had point-of-use reverse-osmosis systems (POU RO), while in NJ, dual-tank point-of-entry (POE) whole house systems were popular. Arsenic treatment systems reduced well water arsenic concentrations ([As]) by up to two orders of magnitude, i.e. from a median of 71.7 to 0.8 μg/L and from a mean of 105 to 14.3 μg/L in ME, and from a median of 8.6 to 0.2 μg/L and a mean of 15.8 to 2.1 μg/L in NJ. More than half (53%) of the systems in ME reduced water [As] to below 1 µg/L, compared to 69% in NJ. The treatment system failure rates were 19% in ME (> USEPA MCL 10 µg/L) and 16% in NJ (> NJ standard 5 μg/L). In both states, the higher the untreated well water [As] and the As(III)/As ratio, the higher the rate of treatment failure. POE systems failed less than POU systems, as did the treatment systems installed and maintained by vendors than those by homeowners. The 7-fold reduction of [As] in the treated water reduced skin cancer risk alone from 3,765 to 514 in 1 million in ME, and from 568 to 75 in 1 million in NJ.

Maine, New Jersey↗

Ground-water quality data in the Owens and Indian Wells Valleys study unit, 2006: Results from the California GAMA Program

Ground-water quality in the approximately 1,630 square-mile Owens and Indian Wells Valleys study unit (OWENS) was investigated in September-December 2006 as part of the Priority Basin Project of Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project was developed in response to the Groundwater Quality Monitoring Act of 2001 and is being conducted by the U.S. Geological Survey (USGS) in collaboration with the California State Water Resources Control Board (SWRCB). The Owens and Indian Wells Valleys study was designed to provide a spatially unbiased assessment of raw ground-water quality within OWENS study unit, as well as a statistically consistent basis for comparing water quality throughout California. Samples were collected from 74 wells in Inyo, Kern, Mono, and San Bernardino Counties. Fifty-three of the wells were selected using a spatially distributed, randomized grid-based method to provide statistical representation of the study area (grid wells), and 21 wells were selected to evaluate changes in water chemistry in areas of interest (understanding wells). The ground-water samples were analyzed for a large number of synthetic organic constituents [volatile organic compounds (VOCs), pesticides and pesticide degradates, pharmaceutical compounds, and potential wastewater- indicator compounds], constituents of special interest [perchlorate, N-nitrosodimethylamine (NDMA), and 1,2,3- trichloropropane (1,2,3-TCP)], naturally occurring inorganic constituents [nutrients, major and minor ions, and trace elements], radioactive constituents, and microbial indicators. Naturally occurring isotopes [tritium, and carbon-14, and stable isotopes of hydrogen and oxygen in water], and dissolved noble gases also were measured to help identify the source and age of the sampled ground water. This study evaluated the quality of raw ground water in the aquifer in the OWENS study unit and did not attempt to evaluate the quality of treated water delivered to consumers. Water supplied to consumers typically is treated after withdrawal from the ground, disinfected, and blended with other waters to maintain acceptable water quality. Regulatory thresholds apply to treated water that is served to the consumer, not to raw ground water. However, to provide some context for the results, concentrations of constituents measured in the raw ground water were compared with regulatory and non-regulatory health-based thresholds established by the U.S. Environmental Protection Agency (USEPA) and California Department of Public Health (CDPH) and non-regulatory thresholds established for aesthetic concerns (secondary maximum contamination levels, SMCL-CA) by CDPH. VOCs and pesticides were detected in samples from less than one-third of the grid wells; all detections were below health-based thresholds, and most were less than one-one hundredth of threshold values. All detections of perchlorate and nutrients in samples from OWENS were below health-based thresholds. Most detections of trace elements in ground-water samples from OWENS wells were below health-based thresholds. In samples from the 53 grid wells, three constituents were detected at concentrations above USEPA maximum contaminant levels: arsenic in 5 samples, uranium in 4 samples, and fluoride in 1 sample. Two constituents were detected at concentrations above CDPH notification levels (boron in 9 samples and vanadium in 1 sample), and two were above USEPA lifetime health advisory levels (molybdenum in 3 samples and strontium in 1 sample). Most of the samples from OWENS wells had concentrations of major elements, TDS, and trace elements below the non-enforceable standards set for aesthetic concerns. Samples from nine grid wells had concentrations of manganese, iron, or TDS above the SMCL-CAs.

California↗

Groundwater-quality and quality-control data for two monitoring wells near Pavillion, Wyoming, April and May 2012

In June 2010, the U.S. Environmental Protection Agency installed two deep monitoring wells (MW01 and MW02) near Pavillion, Wyoming, to study groundwater quality. During April and May 2012, the U.S Geological Survey, in cooperation with the Wyoming Department of Environmental Quality, collected groundwater-quality data and quality-control data from monitoring well MW01 and, following well redevelopment, quality-control data for monitoring well MW02. Two groundwater-quality samples were collected from well MW01—one sample was collected after purging about 1.5 borehole volumes, and a second sample was collected after purging 3 borehole volumes. Both samples were collected and processed using methods designed to minimize atmospheric contamination or changes to water chemistry. Groundwater-quality samples were analyzed for field water-quality properties (water temperature, pH, specific conductance, dissolved oxygen, oxidation potential); inorganic constituents including naturally occurring radioactive compounds (radon, radium-226 and radium-228); organic constituents; dissolved gasses; stable isotopes of methane, water, and dissolved inorganic carbon; and environmental tracers (carbon-14, chlorofluorocarbons, sulfur hexafluoride, tritium, helium, neon, argon, krypton, xenon, and the ratio of helium-3 to helium-4). Quality-control sample results associated with well MW01 were evaluated to determine the extent to which environmental sample analytical results were affected by bias and to evaluate the variability inherent to sample collection and laboratory analyses. Field documentation, environmental data, and quality-control data for activities that occurred at the two monitoring wells during April and May 2012 are presented.

Wyoming↗

Hydrogeology, geochemistry, and quality of water of The Basin and Oak Spring areas of the Chisos Mountains, Big Bend National Park, Texas

Test drilling near two sewage lagoons in The Basin area of the Chisos Mountains, Big Bend National Park, Texas, has shown that the alluvium and colluvium on which the lagoons are located is not saturated in the immediate vicinity of the lagoons. A shallow aquifer, therefore, does not exist in this critical area at and near the lagoons. Should seepage outflow from the lagoons occur, the effluent from the lagoons might eventually be incorporated into shallow ground water moving westward in the direction of Oak Spring. Under these conditions such water could reach the spring. Test borings that bottomed in bedrock below the alluvial and colluvial fill material are dry, indicating that no substantial leakage from the lagoons was detected. Therefore, no contaminant plume was identified. Fill material in The Basin does not contain water everywhere in its extensive outcropping area and supplies only a small quantity of ground water to Window Pouroff, which is the only natural surface outlet of The Basin. Oak Spring, which is almost 2 miles downgradient from the lagoons, is the sole source of water for The Basin the principal tourist area in Big Bend National Park. Test drilling in the Oak Spring area revealed that the aquifer in the immediate vicinity of Oak Spring is a 5-foot thick sand bed hydraulically confined above and below by relatively thick, compact clay. The sand bed might be bounded locally by faults to the east and west of the spring. The test drilling and seismic surveys in the area also established the existence of a thick, extensive, surficial layer of colluvium consisting of large rhyolite boulders. The colluvial layer, which overlies sedimentary bedrock containing the Oak Spring aquifer, was unsaturated at the borehole sites. Information from drilling and from hydrogeologic observation indicates that the water from Oak Spring originates as precipitation in the Oak Spring area west of The Basin, with possibly a contribution originating as discharge from The Basin. The rhyolite boulder field in the Oak Spring area, which includes talus from Vernon Bailey Peak, is an effective receptacle for rapid recharge of precipitation. This water could then be efficiently routed into the Oak Spring aquifer in places to the east of Oak Spring where any shallow ground water in the boulder field might enter the subcropping truncated aquifer. Water-chemistry data, hydrochemical facies, and isotopic data also indicate that water from Oak Spring originates principally from precipitation onto the land surface of the Oak Spring area. Tritium data indicate that Oak Spring water is "modern," with an average age of recharge less than 14 years. The flow rates recorded almost continuously at Oak Spring beginning in December 1986 show a close relation between precipitation and discharge. The highest recorded spring flow of 167 gallons per minute in December 1986 is attributed to record high precipitation in the area during 1986. The lowest recorded flow of 22.4 gallons per minute, in December 1989, followed a period of 20 out of 26 months of below-normal precipitation. Flow at Oak Spring typically lags behind precipitation by about 1 month. This fairly rapid response indicates the spring is fed by a shallow aquifer having good permeability and effective recharge areas with the ability to absorb precipitation rapidly.

Texas↗

Physical characteristics and quality of water from selected springs and wells in the Lincoln Point-Bird Island area, Utah Lake, Utah

From February 1991 to October 1992, the U.S. Geological Survey, in cooperation with the Central Utah Water Conservancy District, investigated the hydrology of the Lincoln Point - Bird Island area in the southeast part of Utah Lake, Utah. The investigation included measurements of the discharge of selected springs and measurements of the physical and chemical characteristics of water from selected springs and wells in the LincolnPoint - Bird Island area. This report contains data for twenty-one distinct springs in the study area including two springs beneath the surface of Utah Lake at Bird Island. Data from this study, combined with data from previous studies, indicate that the location of springs in the Lincoln Point - Bird Island area probably is controlled by fractures that are the result of faulting. Measured discharge of springs in the Lincoln Point - Bird Island area ranged from less than 0.01 cubic foot per second to 0.84 cubic foot per second. Total discharge in the study area, including known unmeasured springs and seeps, is estimated to be about 5 cubic feet per second. Reported and measured temperatures of water from springs and wells in the Lincoln Point - Bird Island area ranged from 16.0 degrees Celsius to 36.5 degrees Celsius. Dissolved-solids con-centrations ranged from 444 milligrams per liter to 7,932 milligrams per liter, and pH ranged from 6.3 to 8.1. Physical and chemical characteristics of spring and well water from the west side of Lincoln Point were virtually identical to the physical and chemical characteristics of water from the submerged Bird Island springs, indicating a similar source for the water. Water chemistry, isotope analyses, and geothermometer calculations indicate deep circulation of water discharging from the springs and indicate that the source of recharge for the springs at Lincoln Point and Bird Island does not appear to be localized in the LincolnPoint - Bird Island area.

Water-Resources Investigations Report↗

River chemistry as a monitor of Yosemite Park mountain hydroclimates

High-frequency, high-altitude measurements of water chemistry provide insights into processes relating to the hydrology, climate, and geochemistry of mountain catchments. When such observations are combined with stream stage, temperature, snow, weather, and other surface hydroclimate measurements, they are particularly useful in allowing connections between climate, river discharge, river chemistry, and ecosystems to be discerned. Climate is the major source of variability in U.S. and global water resources. For example, large-scale variations in the global atmosphere and the Pacific Ocean are responsible for much of the variability in river discharge in Hawaii, Alaska, the U.S. Pacific Northwest, and the U.S. Southwest [ Cayan and Peterson , 1989], and thus are closely linked to water and energy resources of the western United States [ Cayan et al ., 2003].

Eos, Earth and Space Science News↗