SEARCH · Search USGS

Results for “Project Completion Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources

USGS1978

The hydrology of Lake Rousseau, west-central Florida

Lake Rousseau, about 4 miles southwest of Inglis, Florida, was formed in 1909 by impoundment of the Withlacooche River by Inglis Dam, west of Dunnellon, Florida. The lake was to have been part of the Cross-Florida Barge Canal; a lock and channel associated with the presently inactive project were completed in 1969. Lake Rousseau is about 11 miles long, covers about 4,000 acres, and contains about 34,000 acre-feet of water at the normal pool elevation of 27.5 feet above mean sea level. Inflow to the lake is relatively constant and responds slowly to rainfall. The estimated 100-year peak inflow, 10,400 cubic feet per second, is only 19 percent higher than the 100-year high monthly inflow. Water in Lake Rousseau is a calcium-bicarbonate type and is hard. Mean total phosphorus and organic nitrogen concentrations are considerably lower in Lake Rousseau than in north-central Florida lakes which have been considered to be eutrophic by other investigators, however, the lake supports of prolific aquatic plant community. Dissolved-oxygen concentrations near the water surface are occasionally less than 3 mg/liter. (Woodard-USGS)

Florida↗

USGS2000

Hydrogeology and simulation of ground-water flow at the Gettysburg Elevator Plant Superfund Site, Adams County, Pennsylvania

Ground water in Triassic-age sedimentary fractured-rock aquifers in the area of Gettysburg, Pa., is used as drinking water and for industrial and commercial supply. In 1983, ground water at the Gettysburg Elevator Plant was found by the Pennsylvania Department of Environmental Resources to be contaminated with trichloroethene, 1,1,1-trichloroethane, and other synthetic organic compounds. As part of the U.S. Environmental Protection Agency?s Comprehensive Environmental Response, Compensation, and Liability Act, 1980 process, a Remedial Investigation was completed in July 1991, a method of site remediation was issued in the Record of Decision dated June 1992, and a Final Design Report was completed in May 1997. In cooperation with the U.S. Environmental Protection Agency in the hydrogeologic assessment of the site remediation, the U.S. Geological Survey began a study in 1997 to determine the effects of the onsite and offsite extraction wells on ground-water flow and contaminant migration from the Gettysburg Elevator Plant. This determination is based on hydrologic and geophysical data collected from 1991 to 1998 and on results of numerical model simulations of the local ground-water flow-system. The Gettysburg Elevator Site is underlain by red, green, gray, and black shales of the Heidlersburg Member of the Gettysburg Formation. Correlation of natural-gamma logs indicates the sedimentary rock strike about N. 23 degrees E. and dip about 23 degrees NW. Depth to bedrock onsite commonly is about 6 feet but offsite may be as deep as 40 feet. The ground-water system consists of two zones?a thin, shallow zone composed of soil, clay, and highly weathered bedrock and a thicker, nonweathered or fractured bedrock zone. The shallow zone overlies the bedrock zone and truncates the dipping beds parallel to land surface. Diabase dikes are barriers to ground-water flow in the bedrock zone. The ground-water system is generally confined or semi-confined, even at shallow depths. Depth to water can range from flowing at land surface to more than 71 feet below land surface. Potentiometric maps based on measured water levels at the Gettysburg Elevator Plant indicate ground water flows from west to east, towards Rock Creek. Multiple-well aquifer tests indicate the system is heterogeneous and flow is primarily in dipping beds that contain discrete secondary openings separated by less permeable beds. Water levels in wells open to the pumped bed, as projected along the dipping stratigraphy, are drawn down more than water levels in wells not open to the pumped bed. Ground-water flow was simulated for steady-state conditions prior to pumping and long-term average pumping conditions. The three-dimensional numerical flow model (MODFLOW) was calibrated by use of a parameter estimation program (MODFLOWP). Steady-state conditions were assumed for the calibration period of 1996. An effective areal recharge rate of 7 inches was used in model calibration. The calibrated flow model was used to evaluate the effectiveness of the current onsite and offsite extraction well system. The simulation results generally indicate that the extraction system effectively captures much of the ground-water recharge at the Gettysburg Elevator Plant and, hence, contaminated ground-water migrating from the site. Some of the extraction wells pump at low rates and have very small contributing areas. Results indicate some areal recharge onsite will move to offsite extraction wells.

Pennsylvania↗

USGS2018

Santa Barbara and Foothill groundwater basins Geohydrology and optimal water resources management—Developed using density dependent solute transport and optimization models

Groundwater has been a part of the city of Santa Barbara’s water-supply portfolio since the 1800s; however, since the 1960s, the majority of the city’s water has come from local surface water, and the remainder has come from groundwater, State Water Project, recycled water, increased water conservation, and as needed, seawater desalination. Although groundwater from the Santa Barbara and Foothill groundwater basins only accounts for a small percentage of the long-term supply, it is an important source of supplemental water during times of surface-water shortages. During the late 1980s and early 1990s, production wells extracted additional groundwater to compensate for drought related water-delivery shortfalls from other sources; in response, water levels declined substantially in the Santa Barbara and Foothill groundwater basins (below sea level in the Santa Barbara groundwater basin). In coastal basins that have groundwater extraction near shore, seawater intrusion is often a problem. Seawater intrusion in the Santa Barbara groundwater basin is thought to be more limited than in other coastal basins because of an offshore fault that acts as a partial barrier to groundwater flow. During the late 1980s and early 1990s, seawater intrusion was observed in the Santa Barbara groundwater basin, as indicated by increased chloride concentrations at several monitoring wells that ranged from 200 ft to 1,300 ft from the ocean and as close as 2,900 ft to the nearest pumping well. This demonstrated that seawater can intrude into the Santa Barbara groundwater basin when groundwater levels fall below sea level near the coast. The city of Santa Barbara is interested in developing a better understanding of the sustainability of its groundwater supplies. In 2014, California adopted historic legislation to manage its groundwater: the Sustainable Groundwater Management Act (SGMA). The SGMA requires the development and implementation of “Groundwater Sustainability Plans” in 127 priority groundwater basins; although Santa Barbara was not a designated priority basin, the city is taking steps to achieve sustainability. Sustainability was defined in the SGMA in terms of avoiding undesirable results: significant and unreasonable groundwater-level declines, reduction in groundwater storage, seawater intrusion, water-quality degradation, land subsidence, and surface-water depletion. In this project, a cooperative study between the U.S. Geological Survey (USGS) and the city of Santa Barbara, sustainable yield is defined as the volume of groundwater that can be pumped from storage without causing water-level drawdowns and the associated increases in seawater intrusion (as indicated by increases in measured chloride concentrations) at selected wells. In order to estimate the sustainability of Santa Barbara’s groundwater basins, a three-dimensional density-dependent groundwater-flow and solute-transport model (the Santa Barbara Flow and Transport Model, or SBFTM) was developed on the basis of an existing groundwater-flow model. To simulate seawater intrusion to the Santa Barbara Basin under various management strategies, the SBFTM uses the USGS code SEAWAT to simulate salinity transport and variable-density flow. The completed SBFTM was coupled with a management optimization tool, in this case a multi-objective evolutionary algorithm, to determine optimal pumping strategies that maximize the sustainable yield and at the same time satisfy user-defined drawdown and chloride-concentration constraints. As part of this study, a three-dimensional hydrogeologic framework model was developed to quantify the extent and hydrogeologic characteristics of the Santa Barbara and Foothill groundwater basins and to help define the discretization and hydraulic properties used in the SBFTM. The development of the hydrogeologic framework model required the collection and reconciliation of geologic and geophysical data from existing maps, reports, and databases, along with geologic and hydrologic data from recently drilled wells. These data were integrated into a three-dimensional hydrogeologic framework model that defines the stratigraphy and geometry of the aquifer zones and the major geologic structures in the basin. The hydrogeologic framework model also quantifies the variation in sediment grain size within each aquifer zone as the percentage of coarse-grained sediment. Previous studies indicated that there are two principal water-producing zones in the Santa Barbara groundwater basin, the upper and lower producing zones; an additional thin, productive zone was identified as part of this study. This “middle producing zone” is not as areally extensive as the upper and lower producing zones and only exists in the coastal part of Storage Unit I. These producing zones are bounded at depth by less productive shallow, middle, and deep zones. Two versions of the SBFTM were constructed: an initial-condition model and a modern transient model. The initial-condition model is a long-term transient model that simulates flow and solute-transport conditions during a period with limited anthropogenic influences preceeding the modern transient model. The simulation-transient model simulates flow and transport conditions from 1929 through 2013; however, because of data availability, the focus of the model calibration was 1972–2013. The SBFTM was calibrated to measured groundwater levels and drawdown, as well as measured chloride concentrations and change in concentrations, using a combination of automated and trial-and-error parameter-estimation techniques. A sensitivity analysis indicated that, in general, the SBFTM was most sensitive to recharge- and pumping-distribution parameters, specifically those controlling the amount of small-catchment recharge and the distribution of water extraction by hydrogeologic layer for production wells. The model was also sensitive to parameters controlling stream-recharge rates, horizontal and vertical hydraulic conductivity, and porosity. From 1929 to 1971, most of the water entering the area represented by the SBFTM was from creek and small-catchment recharge, and the majority of water leaving the SBFTM area was from pumping, discharge to creeks, and drains. In addition, about 37 percent of the total pumpage came from a net reduction in groundwater storage. From 1972 to 2013, the amount of water entering and leaving the SBFTM was fairly similar as that from 1929 to 1971, except the reduction in pumpage added about 17,000 acre-ft of water to storage. During this later period, there were also times of storage loss. For example, during July 1990, a month when approximately 705 acre-ft of groundwater was pumped in the study area, the pumpage was much greater than all sources of recharge combined, and about 382 acre-ft of water was removed from groundwater storage. Simulated hydraulic heads replicated the observed data to an acceptable matching of the measured water-level, flow direction, and vertical gradients. Simulated hydrographs for selected wells were in good agreement with the measured data, with an average residual of -2.7 ft and a standard deviation of 14.5 ft, indicating that the simulated heads, on average, underestimated the observed water levels. An examination of the model fit indicated that most of the discrepancies were lower simulated heads at wells proximal to production well sites. The simulated chloride concentrations reasonably matched the rising limbs of the measured breakthrough curves in terms of timing and magnitude; however, the simulation overestimated the chloride concentrations on the falling limbs. The overestimation of low chloride concentrations was attributed to the model overestimating the advance of the chloride front during periods of heavy pumping and underestimating the retreat of the chloride front during periods of low pumping. These simulation errors would result in a conservative response by local water managers to seawater intrusion. The SBFTM was used to develop a collection of predictive simulations optimized to produce pumping schedules that maximize yield, subject to a set of constraints and competing objectives. The simulations were grouped as scenarios that differed in their time horizon, initial conditions for groundwater levels and chloride concentrations, as well as precipitation, which was incorporated into the model through simulated recharge. Overall, five scenarios were developed in a multi-objective framework to obtain optimal pumping rates for all of the wells managed by the city, while minimizing excessive drawdown and seawater intrusion. For the current study, complexities in the simulation model and the optimization formulation required additional considerations. Incorporating the solute-transport equations to simulate chloride transport added a highly nonlinear process that is solved iteratively in each time step of the groundwater-flow model. These nonlinearities, coupled with the highly refined grid in the current model, creates challenges for many traditional optimization methods. Therefore, an optimization method was needed that could address nonlinear relationships as well as a very large problem size. Lastly, the optimization problem was reformulated to include multiple objectives without requiring convergence to a single solution. This approach, guided by the city’s objectives, allowed the maximum extraction of information from the complex simulation. Borg, a multi-objective evolutionary algorithm, was chosen as the optimization algorithm for this study for several reasons: (1) it is very computationally efficient; (2) it can run in parallel; (3) it requires little user input; and (4) it can solve for multiple competing objectives. The first three points allow the algorithm to proceed toward the optimal solutions at the fastest possible rate. The fourth point is advantageous for large, complex optimization problems because it is difficult to formulate the optimization problem in a way that produces only one optimal solution. The problem formulation consisted of four competing objectives and a constraint set in accordance with the main concerns of the city. The objectives were maximizing total pumpage, minimizing seawater intrusion, minimizing total drawdown in production wells, and minimizing the maximum drawdown. The constraints were pump capacity, meeting drinking-water standards for chloride, maintaining a specified minimum flowrate to a groundwater treatment plant, and maintaining minimum water levels in pumping wells. The decision variables either were quarterly pumpage by well or total pumpage by basin. Five optimization scenarios were developed that allow the decision makers to evaluate a range of optimal solutions for a variety of water levels and chloride concentrations as well as potential future climatic conditions. Three scenarios (1, 2, and 5) were multi-objective optimization formulations that allowed for variations in management preferences and climatic conditions. The other two scenarios (3 and 4) were designed to examine the optimization results to answer specific questions. Scenario 1 described the best-case sustainable yield assuming a “full” basin (that is, high initial water levels) and typical climate conditions for 10 years. Scenario 2 also started with a “full” basin; however, this was followed by a 10-year drought. Scenario 3 determined if an “empty” basin (that is, low initial water levels) would recover to full conditions (1998 conditions) given climate assumptions and optimal pumping schedules from scenarios 1 and 2. Scenario 4 was designed to produce decision rules that can be used by water managers to help choose an optimal pumping schedule based on measured water-level or chloride data. Scenario 5 identified future pumping schedules based on short-term climate variations during a 2-year management horizon. The results from scenarios 1 and 2 described the differences in maximum pumpage in the basin under typical and dry long-term climate projections, respectively. The scenario 1 results indicated the maximum 10-year pumpage of the basin was about 31,300 acre-ft under typical conditions and controlling simulated seawater intrusion and drawdowns. For scenario 2, less recharge over the 10-year dry climate produced a maximum pumpage estimate of 30,000 acre-ft to control seawater intrusion and drawdowns. The larger pumpage for scenario 1 resulted in more seawater intrusion, but less total drawdown, compared to that of scenario 2. Results for scenarios 3 and 4 showed the basin’s response to management actions combined with climate projections. Both scenarios used the optimal pumping schedules and the 10-year climates from scenarios 1 and 2. The scenario 3 results showed that under minimal pumping, the basin did not fully recover to 1998 water levels within 10 years under either climate scenario. The relatively larger recharge from the typical climate resulted in less drawdown at coastal monitoring wells after the 10-year recovery period than that from the dry climate. The location of the seawater intrusion front was not appreciably different between the scenarios, however. Scenario 4 used the optimal results from scenarios 1 and 2 to produce decision-rule curves that illustrated the pumpage for each basin, given measured levels of chloride concentration or drawdown. This allowed the use of additional measurements at monitoring wells to assess future management decisions on the basis of the sensitivity of observations of drawdown and seawater intrusion to various pumping rates. Scenario 5 allowed managers to investigate the effects of short-term climate variations on optimal pumping schedules. Three specific 2-year simulations were optimized: typical-to-dry (scenario 5A), dry-to-typical (scenario 5B), and dry-to-dry (scenario 5C). The most noteable result from scenario 5 was the overall reduction in optimal pumpage for most schedules in scenario 5C, when the climate is simulated as dry-to-dry. There are also many optimal pumping schedules that produced an overall increase in waterlevels over the two-year simulation period, regardless of climatic condition. Similar to scenario 2, the scenario 5C results represents conservative yield estimates under a minimal-precipitation climatic condition.

California↗

USGS2026

The Great Lakes Geologic Mapping Coalition—Working collaboratively to understand the geology of the Great Lakes Region

Introduction The Great Lakes Geologic Mapping Coalition (GLGMC), commonly referred to as the “Coalition,” is a partnership between the U.S. Geological Survey (USGS), the U.S. States of Illinois, Indiana, Michigan, Minnesota, New York, Ohio, Pennsylvania, and Wisconsin and the Canadian province of Ontario. The member States receive funding for geologic mapping work from the USGS National Cooperative Geologic Mapping Program (NCGMP), whereas Ontario participates as a nonfunded partner. The mission of the GLGMC is to produce three-dimensional (3D) geologic maps that depict unconsolidated sediments and near-surface bedrock in the Great Lakes region of North America. Geologic maps are the basis of most earth science investigations and help support resource exploration (energy, minerals, groundwater), natural hazard mitigation, infrastructure development, and land-use planning, all of which can be used to advance economic development and strengthen national security in the Great Lakes region. During the last few million years, the Great Lakes region has experienced repeated glacial advances and retreats, leaving behind extensive sediments, abundant natural resources, and widespread effects on the underlying bedrock geology (Swezey and others, 2022). Linked by shared histories of past glaciations, industrial agriculture, and legacy automotive, coal, steel, and manufacturing industries, the GLGMC member States collaborate to improve the understanding of the 3D distribution of the sediments overlying the region’s bedrock (fig. 1). Developing a comprehensive subsurface 3D framework of this glaciated terrain can provide earth science data to policymakers at all levels. These insights facilitate informed decisions on the exploration, use, and protection of vital resources, such as critical minerals, industrial materials, and aquifers, thereby supporting economic prosperity and the well-being of the citizens of this region. Since its inception in 1998, the Coalition has completed more than 100 geologic mapping projects across the Great Lakes region. Each project aims to deliver geologic maps, 3D datasets, and other information that improves understanding of the geology of the Great Lakes region, with an emphasis on economic and water resources. Key deliverables include 3D geologic maps and models typically portraying sediment thickness, often derived from top-of-bedrock and borehole data. These products are developed through a combination of fieldwork, subsurface modeling, and the collection and analysis of rock and sediment cores. To support Coalition goals, member States collaborate with scientists working on related STATEMAP, EDMAP, and FEDMAP projects. Coalition scientists also engage with Tribal Nations in the Great Lakes region to ensure that Tribal interests pertaining to Coalition work are addressed. Through this collaboration, the Coalition unites the efforts of State, Federal, and Tribal Nation stakeholders to advance geologic data production and enhance understanding of the geologic resources of the Great Lakes region.

Illinois, Indiana, Michigan, Minnesota, New York, ↗

USGS1994

Land use in, and water quality of, the Pea Hill Arm of Lake Gaston, Virginia and North Carolina, 1988-90

The City of Virginia Beach currently (1994) supplies water to about 400,000 people in southeastern Virginia. The city plans to withdraw water from the Pea Hill Arm of Lake Gaston to meet projected water needs of the population to the year 2030. The purpose of this report is to (1) describe the temporal and spatial distribution of selected water-quality constituents, (2) document current (1989) land use and land cover in the Pea Hill Arm drainage basin, and (3) discuss relations, if any, between the quality of water in the inlets within the Pea Hill Arm and land uses. The report focuses on water-quality problems in the basin, including changes in concentrations of major ions, nutrients, and algae associated with urban development adjacent to water bodies. The Pea Hill Arm was classified as mesotrophic on the basis of the range of concentrations of total phosphorus (0.001 to 0.61 milligrams per liter); the range of concentrations of total organic-plus-ammonia nitrogen (0.2 to 1.4 milligrams per liter); and the range of concentrations of chlorophyll a (1.4 to 56 micrograms per liter). These water-quality data were collected at 3 feet below the water surface during water years 1989-90. Thermal stratification in Pea Hill Arm generally began in April and ended in September. Water below a depth of about 25 feet generally became anoxic by June. Destratification generally began in late September and was completed by November. Lake Gaston followed the same general stratification and destratification pattern as Pea Hill Arm, except Lake Gaston was partially destratified during the summer when large amounts of water were released from John H. Kerr Reservoir and Lake Gaston Dams. During water year 1988, streamflows were 33 percent below the long-term mean-annual streamflows at one of the major streams to Lake Gaston. Low streamflows contributed to elevated specific conductances and concentrations of sodium, calcium, magnesium, and alkalinity from October 1988 to February 1989 at sampling stations in the Pea Hill Arm and Lake Gaston. About 75 percent of the land use in the Pea Hill Arm is forest land. The remaining 25 percent of the Pea Hill Arm drainage basin is 8 percent pasture/open land, 8 percent open water, 6 percent residential land, and 3 percent cropland. No statistical relations are present between water-quality constituents measured and developed land uses within 11 basins in the Pea Hill Arm Basin, except during periods of stormwater runoff. During a stormwater-runoff event, there was a relation between total nitrite plus nitrate and land use (Kendall's tau correlation coefficient of 0.69). The relation between the developed land use and total nitrite plus nitrate can also be related to the increased ground-water inputs during high base-flow periods. Spatial differences in water-quality constituents as determined by Wilcoxon (matched-pairs) signed-rank tests and cluster analyses were longitudinal and primarily grouped into riverine, transition, and lacustrine zones. These zones were grouped on the basis of flow characteristics and nutrient concentrations.

North Carolina, Virginia↗

USGS2013

Geochemical and mineralogical data for soils of the conterminous United States

In 2007, the U.S. Geological Survey initiated a low-density (1 site per 1,600 square kilometers, 4,857 sites) geochemical and mineralogical survey of soils of the conterminous United States as part of the North American Soil Geochemical Landscapes Project. Sampling and analytical protocols were developed at a workshop in 2003, and pilot studies were conducted from 2004 to 2007 to test and refine these recommended protocols. The final sampling protocol for the national-scale survey included, at each site, a sample from a depth of 0 to 5 centimeters, a composite of the soil A horizon, and a deeper sample from the soil C horizon or, if the top of the C horizon was at a depth greater than 1 meter, from a depth of approximately 80–100 centimeters. The <2-millimeter fraction of each sample was analyzed for a suite of 45 major and trace elements by methods that yield the total or near-total elemental content. The major mineralogical components in the samples from the soil A and C horizons were determined by a quantitative X-ray diffraction method using Rietveld refinement. Sampling in the conterminous United States was completed in 2010, with chemical and mineralogical analyses completed in May 2013. The resulting dataset provides an estimate of the abundance and spatial distribution of chemical elements and minerals in soils of the conterminous United States and represents a baseline for soil geochemistry and mineralogy against which future changes may be recognized and quantified. This report (1) describes the sampling, sample preparation, and analytical methods used; (2) gives details of the quality control protocols used to monitor the quality of chemical and mineralogical analyses over approximately six years; and (3) makes available the soil geochemical and mineralogical data in downloadable tables.

Data Series↗

USGS2007

Geologic map of Nevada

The purpose of the Geologic Map of Nevada is to provide an integrated set of digital geologic information that can be used for regional geologic and rigorous spatial analysis. Two components of this map represent new information that has not been published in this form before. The new geology layer was created by merging into a single file individual digital Nevada county geologic maps (Hess and Johnson, 1997), published at a scale of 1:250,000. A new regional interpretation was created to unify all of the different county rock units, and then appropriate edits and modifications were made to the file to reflect additional geologic information and more current geologic interpretations. All possible sources of information were not utilized in the scope of this project, but rather the goal was to create a consistent Statewide 1:250,000-scale map that would facilitate regional geologic interpretation and be a foundation for future spatial analyses of digital data. Secondly, a new database of conodont biostratigraphic data compiled and analyzed by Anita Harris is also incorporated into the map. Information about many, but not all, of these conodont samples have been published separately elsewhere over the years, but they have not been presented together in a single digital database. Other previously published data layers are used in this map to enhance the usefulness of the geologic information. These layers include mineral deposit locations, oil well locations, and cartographic layers such as county boundaries, roads, towns, cities, rivers, water bodies, township, range and section grids, quadrangle grids, and topography. A summary of these components is given below, and complete descriptions of each layer are provided in the digital metadata.

Nevada↗

USGS2006

Hydrology and simulation of ground-water flow, Lake Point, Tooele County, Utah

Water for new residential development in Lake Point, Utah may be supplied by public-supply wells completed in consolidated rock on the east side of Lake Point. Ground-water flow models were developed to help understand the effect the proposed withdrawal will have on water levels, flowing-well discharge, spring discharge, and ground-water quality in the study area. This report documents the conceptual and numerical ground-water flow models for the Lake Point area. The ground-water system in the Lake Point area receives recharge from local precipitation and irrigation, and from ground-water inflow from southwest of the area. Ground water discharges mostly to springs. Discharge also occurs to evapotranspiration, wells, and Great Salt Lake. Even though ground water discharges to Great Salt Lake, dense salt water from the lake intrudes under the less-dense ground water and forms a salt-water wedge under the valley. This salt water is responsible for some of the high dissolved-solids concentrations measured in ground water in Lake Point. A steady-state MODFLOW-2000 ground-water model of Tooele Valley adequately simulates water levels, ground-water discharge, and ground-water flow direction observed in Lake Point in 1969 and 2002. Simulating an additional 1,650 acre-feet per year withdrawal from wells causes a maximum projected drawdown of about 550 feet in consolidated rock near the simulated wells and drawdown exceeding 80 feet in an area encompassing most of the Oquirrh Mountains east of Lake Point. Drawdown in most of Lake Point ranges from 2 to 10 ft, but increases to more than 40 feet in the areas proposed for residential development. Discharge to Factory Springs, flowing wells, evapotranspiration, and Great Salt Lake is decreased by about 1,100 acre-feet per year (23 percent). The U.S. Geological Survey SUTRA variable-density ground-water-flow model generates a reasonable approximation of 2002 dissolved-solids concentration when simulating 2002 withdrawals. At most locations with measured dissolved-solids concentration in excess of 1,000 milligrams per liter, the model simulates salt-water intrusion with similar concentrations. Simulating an additional 1,650 acre-feet per year withdrawal increased simulated dissolved-solids concentration by 200 to 1,000 milligrams per liter throughout much of Lake Point and near Factory Springs at a depth of about 250 to 300 feet below land surface. The increase in dissolved-solids concentration with increased withdrawals is greater at a depth of about 700 to 800 feet and exceeds 1,000 milligrams per liter throughout most of Lake Point. At the north end of Lake Point, increases exceed 10,000 milligrams per liter.

Utah↗

USGS2008

Geological, geochemical, and geophysical studies by the U.S. Geological Survey in Big Bend National Park, Texas

Big Bend National Park (BBNP), Tex., covers 801,163 acres (3,242 km 2 ) and was established in 1944 through a transfer of land from the State of Texas to the United States. The park is located along a 118-mile (190-km) stretch of the Rio Grande at the United States-Mexico border. The park is in the Chihuahuan Desert, an ecosystem with high mountain ranges and basin environments containing a wide variety of native plants and animals, including more than 1,200 species of plants, more than 450 species of birds, 56 species of reptiles, and 75 species of mammals. In addition, the geology of BBNP, which varies widely from high mountains to broad open lowland basins, also enhances the beauty of the park. For example, the park contains the Chisos Mountains, which are dominantly composed of thick outcrops of Tertiary extrusive and intrusive igneous rocks that reach an altitude of 7,832 ft (2,387 m) and are considered the southernmost mountain range in the United States. Geologic features in BBNP provide opportunities to study the formation of mineral deposits and their environmental effects; the origin and formation of sedimentary and igneous rocks; Paleozoic, Mesozoic, and Cenozoic fossils; and surface and ground water resources. Mineral deposits in and around BBNP contain commodities such as mercury (Hg), uranium (U), and fluorine (F), but of these, the only significant mining has been for Hg. Because of the biological and geological diversity of BBNP, more than 350,000 tourists visit the park each year. The U.S. Geological Survey (USGS) has been investigating a number of broad and diverse geologic, geochemical, and geophysical topics in BBNP to provide fundamental information needed by the National Park Service (NPS) to address resource management goals in this park. Scientists from the USGS Mineral Resources and National Cooperative Geologic Mapping Programs have been working cooperatively with the NPS and several universities on several research studies within BBNP. Because the last geologic map of the entire BBNP was published in the 1960s, one of the primary goals of the USGS is to provide a new geologic map of BBNP at a scale 1:100,000; this work is ongoing among the USGS, NPS, the Texas Bureau of Economic Geology, and university scientists. This USGS Circular summarizes eight studies funded and primarily carried out by the USGS, but it is not intended to be a comprehensive reference of work conducted in BBNP. This Circular describes topical research of the recently completed interdisciplinary USGS project, which has provided information leading to a more complete understanding of the following topics in BBNP: Tectonic and geologic history (Chapters 1, 2, and 3), Age and formation processes of a skarn mineral deposit (Chapter 4), Geoenvironmental effects of abandoned mercury mines (Chapter 5), Age, source, and geochemistry of surface and subsurface water resources (Chapter 6), Isotopic tracing of food sources of bears (Chapter 7), and Geophysical characteristics of surface and subsurface geology (Chapter 8). Additional information and the geochemical and geophysical data of the USGS studies in BBNP are available on line at http://minerals.cr.usgs.gov/projects/big_bend/index.html.

Texas↗

USGS2002

Color-coded contour map of Mars M 25M RKN

NOTES ON BASE This map is based on data from the Mars Orbiter Laser Altimeter (MOLA) (Smith and others, 2001), an instrument on NASA's Mars Global Surveyor (MGS) spacecraft (Albee and others, 2001). The image used for the base of this map represents more than 600 million measurements gathered between 1999 and 2001, adjusted for consistency (Neumann and others, 2001, 2002) and converted to planetary radii. These have been converted to elevations above the areoid as determined from a martian gravity field solution GMM2 (Lemoine and others, 2001), truncated to degree and order 50, and oriented according to current standards (see below). The average accuracy of each point is originally ~100 meters in horizontal position, and ~1 meter in radius (Neumann, 2001). However, the total elevation uncertainty is at least +3 m due to the global error in the areoid (+1.8 meters according to Lemoine and others, 2001) and regional uncertainties in its shape (communication from Neumann, 2002). The measurements were converted into a digital elevation model (DEM) (communication from Neumann, 2002; Neumann and others, 2001; Smith and others, 2001) using Generic Mapping Tools software (Wessel and Smith, 1998), with a resolution of 0.015625 degrees per pixel or 64 pixels per degree. In projection, the pixels are 926.17 meters in size at the equator. PROJECTION The Mercator projection is used between latitudes +57°, with a central meridian at 0° and latitude equal to the nominal scale at 0°. The Polar Stereographic projection is used for the polar regions north of the +55° parallel and south of the –55° parallel with a central meridian set for both at 0°. The adopted equatorial radius is 3,396.19 km (Duxbury and others 2002; Seidelmann and others 2002). COORDINATE SYSTEM The MOLA data were initially referenced to an internally consistent inertial coordinate system, derived from tracking of the MGS spacecraft. By adopting appropriate values for the orientation of Mars as defined by the International Astronomical Union (IAU) and the International Association of Geodesy (IAG) (Seidelmann and others, 2002), these inertial coordinates were converted into the planet-fixed coordinates (longitude and latitude) used on this map. These values include the orientation of the north pole of Mars (including the effects of precession), the rotation rate of Mars, and a value for W0 of 176.630°, where W0 is the angle along the equator to the east, between the 0° meridian and the equator's intersection with the celestial equator at the standard epoch J2000.0 (Seidelmann and others, 2002). This value of W0 was chosen (Duxbury and others, 2002) in order to place the 0° meridian through the center of the small (~500 m) crater Airy-0, located in the crater Airy (de Vaucouleurs and others, 1973; Seidelmann and others, 2002). Longitude increases to the east, and latitude is planetocentric as allowed by IAU/IAG standards (Seidelmann and others, 2002) and in accordance with current NASA and USGS standards (Duxbury and others, 2002). A secondary grid (printed in red) has been added to the map as a reference to the west longitude/planetographic latitude system that is also allowed by IAU/IAG standards (Seidelmann and others, 2002) and has also been used for Mars. The figure adopted to compute this secondary grid is an oblate spheroid with an equatorial radius of 3,396.19 km and a polar radius of 3,376.2 km (Duxbury and others, 2002; Seidelmann and others, 2002). MAPPING TECHNIQUES To create the topographic base image, the original DEM produced by the MOLA team in Simple Cylindrical projection with a resolution of 64 pixels per degree was projected into the Mercator and Polar Stereographic pieces. A shaded relief was generated from each DEM with a sun angle of 30° from horizontal and a sun azimuth of 270°, as measured clockwise from north, and a vertical exaggeration of 100%. Illumination is from the west, which follows a long-standing USGS tradition for planetary maps. This allows for continuity in the shading between maps and quadrangles, and most closely resembles lighting conditions found on imagery. The DEM values were then mapped to a smooth global color look-up table. Note that the chosen color scheme simply represents elevation changes and is not intended to imply anything about surface characteristics (e.g., past or current presence of water or ice). These two files were then merged and scaled to 1:25 million for the Mercator portion and 1:15,196,708 for the two Polar Stereographic portions, with a resolution of 300 dots per inch. The projections have a common scale of 1:13,923,113 at +56° latitude. Contours were created from the DEM at a 1-kilometer interval. Contours for features with a diameter of 3 km or less (features too small for this map scale) were removed. The contours were then simplified by removing points along the contours spaced less than 1 km apart. NOMENCLATURE Names on this sheet are approved by the IAU and have been applied for features clearly visible at the scale of this map. For a complete list of the IAU-approved nomenclature for Mars, see the Gazetteer of Planetary Nomenclature at http://planetarynames.wr.usgs.gov/. Font color was chosen for readability. Names followed by an asterisk are provisionally approved. M 25M RKN: Abbreviation for Mars, 1:25,000,000 series, shaded relief (R), with color (K) and nomenclature (N) (Greeley and Batson, 1990).

Open-File Report↗

USGS1997

Water resources of Bannock Creek basin, southeastern Idaho

The potential for development of water resources in the Bannock Creek Basin is limited by water supply. Bannock Creek Basin covers 475 square miles in southeastern Idaho. Shoshone-Bannock tribal lands on the Fort Hall Indian Reservation occupy the northern part of the basin; the remainder of the basin is privately owned. Only a small amount of information on the hydrologic and water-quality characteristics of Bannock Creek Basin is available, and two previous estimates of water yield from the basin ranged widely from 45,000 to 132,500 acre-feet per year. The Shoshone-Bannock Tribes need an accurate determination of water yield and baseline water-quality characteristics to plan and implement a sustainable level of water use in the basin. Geologic setting, quantities of precipitation, evapotranspiration, surface-water runoff, recharge, and ground-water underflow were used to determine water yield in the basin. Water yield is the annual amount of surface and ground water available in excess of evapotranspiration by crops and native vegetation. Water yield from Bannock Creek Basin was affected by completion of irrigation projects in 1964. Average 1965-89 water yield from five subbasins in Bannock Creek Basin determined from water budgets was 60,600 acre-feet per year. Water yield from the Fort Hall Indian Reservation part of Bannock Creek Basin was estimated to be 37,700 acre-feet per year. Water from wells, springs, and streams is a calcium bicarbonate type. Concentrations of dissolved nitrite plus nitrate as nitrogen and fluoride were less than Maximum Contaminant Levels for public drinking-water supplies established by the U.S. Environmental Protection Agency. Large concentrations of chloride and nitrogen in water from several wells, springs, and streams likely are due to waste from septic tanks or stock animals. Estimated suspended-sediment load near the mouth of Bannock Creek was 13,300 tons from December 1988 through July 1989. Suspended-sediment discharge was greatest during periods of high streamflow.

Idaho↗

USGS1989

Mineral occurrence and drill-hole location map of the International Falls 1 degree by 2 degrees quadrangle, Minnesota and Ontario

A project to assess the mineral potential of the U.S. part of the International Fall 1° x 2° quadrangle was undertaken by the U.S. Geological Survey (USGS) in the early 1984, as part of the Conterminous United States Mineral Assessment Program (CUSMAP). Because glacial drift covers most of the basement rocks south of the U.S.-Canada border and mineral production in this part of Minnesota has been virtually nonexistent, data from the adjacent part of Ontario has been used to understand the geologic framework and to evaluate mineral-deposit models relevant to the assessment of the U.S. part of the International Falls quadrangle. This map and accompanying tables show the locations of mineral occurrences, prospects and mines in both Canada and the United States, and summarize their lithologic association and the characteristic metals found in them. Locations of drill holes within the United States and completed before 1987 are also included on the map.

Minnesota, Ontario↗

USGS2000

Analytical results and sample locality map for rock, stream-sediment, and soil samples, Northern and Eastern Colorado Desert BLM Resource Area, Imperial, Riverside, and San Bernardino Counties, California

In 1996-1998 the U.S. Geological Survey (USGS) conducted a geochemical study of the Bureau of Land Management's (BLM) 5.5 million-acre Northern and Eastern Colorado Desert Resource Area (usually referred to as the NECD in this report), Imperial, Riverside, and San Bernardino Counties, southeastern California (figure 1). This study was done in support of the BLM's Coordinated Management Plan for the area. This report presents analytical data from this study. To provide comprehensive coverage of the NECD, we compiled and examined all available geochemical data, in digital form, from previous studies in the area, and made sample-site plots to aid in determining where sample-site coverage and analyses were sufficient, which samples should be re-analyzed, and where additional sampling was needed. Previous investigations conducted in parts of the current study area included the National Uranium Resource Evaluation (NURE) program studies of the Needles and Salton Sea 1° x 2° quadrangles; USGS studies of 12 BLM Wilderness Study Areas (WSAs) (Big Maria Mountains, Chemehuevi Mountains, Chuckwalla Mountains, Coxcomb Mountains, Mecca Hills, Orocopia Mountains, Palen-McCoy, Picacho Peak, Riverside Mountains, Sheephole Valley (also known as Sheep Hole/Cadiz), Turtle Mountains, and Whipple Mountains); and USGS studies in the Needles and El Centro 1° x 2° quadrangles done during the early 1990s as part of a project to identify the regional geochemistry of southern California. Areas where we did new sampling of rocks and stream sediments are mainly in the Chocolate Mountain Aerial Gunnery Range and in Joshua Tree National Park, which extends into the west-central part of the NECD, as shown in figure 1 and figure 2. This report contains analytical data for 132 rock samples and 1,245 stream-sediment samples collected by the USGS, and 362 stream-sediment samples and 189 soil samples collected during the NURE program. All samples are from the Northern and Eastern Colorado Desert BLM Resource Area and vicinity. Included in the 1,245 stream-sediment samples collected by the USGS are 284 samples collected as part of the current study, 817 samples collected as part of investigations of the12 BLM WSAs and re-analyzed for the present study, 45 samples from the Needles 1° x 2° quadrangle, and 99 samples from the El Centro 1° x 2° quadrangle. The NURE stream-sediment and soil samples were re-analyzed as part of the USGS study in the Needles quadrangle. Analytical data for samples from the Chocolate Mountain Aerial Gunnery Range, which is located within the area of the NECD, were previously reported (King and Chaffee, 1999a). For completeness, these results are also included in this report. Analytical data for samples from the area of Joshua Tree National Park that is within the NECD have also been reported (King and Chaffee, 1999b). These results are not included in this report. The analytical data presented here can be used for baseline geochemical, mineral resource, and environmental geochemical studies.

California↗

USGS2018

Development of the Wildlife Adaptation Menu for Resource Managers

The Climate Change Response Framework is an example of a collaborative, cross-boundary approach to create a set of tools, partnerships, and actions to support climate-informed conservation and land management. Historically, this effort has focused on the needs of forest managers and forestry professionals. In recent years, however, there has been increasing demand for science and tools to address climate change adaptation in wildlife management and conservation. Not only do wildlife and resource managers need the best available science, it must also be presented in a usable format with feasible options within the purview of an individual manager. The research team is first completing a comprehensive review of peer-reviewed studies to summarize what wildlife-related management actions currently exist in climate change adaptation. They will then develop and test a “menu” of climate change adaptation actions that are suitable for wildlife management in terrestrial ecosystems. This Wildlife Adaptation Menu will be modeled off existing adaptation menus for Forestry and Urban Forestry, and it will be designed to be used in conjunction with the Adaptation Workbook . In addition to a menu of adaption strategies and approaches, the scientists will also identify site-level tactics and develop case studies demonstrating the use and implementation of the menu. To ensure that information and tools meet the needs of managers, the team is involving and integrating input from wildlife managers at every step of the process. Managers will be involved in scoping the project, testing the menu, and implementing the menu.

Final Report↗

USGS1987

Geologic structure and altitude of the top of the Minnelusa Formation, northern Black Hills, South Dakota and Wyoming, and Bear Lodge Mountains, Wyoming

Beginning in 1981, a 3-yr project was conducted to determine the availability and quality of groundwater in the sedimentary bedrock aquifers in the Black Hills of South Dakota and Wyoming. The project was limited to three bedrock units in order of increasing age: the Cretaceous Inyan kara Group, Permian and Pennsylvanian Minnelusa Formation, and Mississippian Madison (or Pahasapa) Limestone. This map shows the altitude of the top of the Minnelusa Formation in the northern Black Hills, and shows the configuration of the structural features in the northern part of the Black Hills and the eastern part of the Bear Lodge Mountains. In general, the Minnelusa Formation dips away from the Black Hills uplift, either to the northeast and the Williston Basin or, south of the Bear Lodge Mountains, to the southwest and the Powder River basin, which is outside the map area. In the map area, the upper beds of the Minnelusa Formation are an aquifer and the lower beds are a confining or semi-confining unit. The upper part of the Minnelusa Formation has a greater percentage of coarse-grained sandstone beds than the lower part. Furthermore, solution and removal of anhydrite, brecciation, and solution of cement binding the sandstone grains may have increased the permeability of the upper part of the Minnelusa Formation in the Black Hills. Wells completed in the upper part of the Minnelusa have yields that exceed 100 gal/min in some areas and at least one large diameter well is reported to flow 1,000 gal/min in some areas and at least one large diameter well is reported to flow 1,000 gal/min. Flowing wells have been completed in the Minnelusa aquifer in most of the study area in South Dakota and in about the northern one-half of Crook County, Wyoming. (Lantz-PTT)

Water-Resources Investigations Report↗

USGS2023

Summary of the history and research of the U.S. Geological Survey gas hydrate properties laboratory in Menlo Park, California, active from 1993 to 2022

The U.S. Geological Survey (USGS) Clathrate Hydrate Properties Project, active from 1993 to 2022 in Menlo Park, California, stemmed from an earlier project on the properties of planetary ices supported by the National Aeronautics and Space Administration’s (NASA’s) Planetary Geology and Geophysics Program. We took a material science approach in both projects, emphasizing chemical purity of samples, having controlled grain size and grain texture, and having verified crystal structures and phase relations. A foundational contribution from our USGS Gas Hydrate Properties Laboratory (GHPL) was in demonstrating the ability to reproducibly create such pure clathrate hydrate samples for study. Clathrate sample synthesis was achieved by heating sieved and weighed pure granular water ice in the presence of cold clathrate-forming gas or liquid. During heating, the ice melts at the grain scale and reacts with the gas to form clathrate. The resulting material has the desired uniformity and purity, with known intergranular porosity; our subsequent measurements showed that these clathrates exhibited the established clathrate structures and phase relations. This novel synthesis method was successful in creating clathrates of pure methane, ethane, propane, carbon dioxide, and multi-component gases. By mixing sand or silt with granular ice, we were also able to make clathrate-sediment aggregates with controlled grain textures. This simple method, adopted by many others in the community, permitted us to measure the physical and chemical properties of well-characterized and well-crystallized clathrates and clathrate/sediment aggregates. At about the same time, we adapted conventional scanning electron microscopy to cryogenic conditions for analysis of grain-scale characteristics of clathrates made in the GHPL as well as those collected from nature by drill core. The uniformity and reproducibility of our samples also allowed us to investigate how clathrates respond to environmental changes in chemistry, temperature, and pressure: we measured chemical exchange rates with dissolved gas species—such as noble gases and chlorofluorocarbons—as well as rates of clathrate dissolution and decomposition. These advances include the first accurate mapping of the conditions that promote the remarkable process of “anomalous preservation” at room pressure, a metastability that offers potential application for low-cost and safe transportation of natural gas from gas fields far from pipelines. Another advancement stemming from the GHPL was the compaction of as-synthesized porous clathrates to nearly full density by applying external pressure using three different techniques. Compaction allows for high-accuracy measurements of many fundamental physical and chemical properties of these materials, such as elastic wavespeeds and moduli, complete thermal properties, decomposition rates, thermal expansion, and clathrate equations of state. These properties and others, in turn, have helped USGS scientists to interpret geophysical well logs and active geophysical surveys, as well as model the rates of gas production from hydrate deposits in nature. Studying this class of icy minerals that occur in abundance on Earth and in the outer solar system has been a fascinating laboratory journey. Here, we summarize the history and major findings of the USGS GHPL in Menlo Park, including both in-house research as well as findings from the synergistic collaborations with other agencies and institutes that were key to the success of our laboratory. The Menlo Park GHPL was more formally incorporated within the USGS Gas Hydrates Project, a collaboration among multiple USGS Science Centers, in the early 2000s under the leadership of Deborah Hutchinson, and now under the leadership of Carolyn Ruppel and Timothy Collett.

Open-File Report↗

USGS1980

A one-dimensional, steady-state, dissolved-oxygen model and waste-load assimilation study for Little Laughery Creek, Ripley and Franklin counties, Indiana

The Indiana State Board of Health is developing a State water-quality management plan that includes establishing Limits for wastewater effluents discharged into Indiana streams. A digital model calibrated to conditions in Little Laughery Creek tributary and Little Laughery Creek was used to predict alternatives for future waste loadings that would be compatible with Indiana stream water-quality standards defined for two critical hydrologic conditions, summer and winter low flows. Natural streamflow during the summer and annual 7-day, 10-year low flow is zero. Headwater flow upstream from the wastewater-treatment facilities consists solely of process cooling water from an industrial discharger. This flow is usually Less than 0.5 cubic foot per second. Consequently, benefits from dilution are minimal. As a result, current and projected ammonia-nitrogen concentrations from the municipal discharges will result in in-stream ammonia-nitrogen concentrations that exceed the Indiana ammonia-nitrogen toxicity standards (maximum stream ammonia-nitrogen concentrations of 2.5 and 4.0 milligrams per liter during summer and winter low flows, respectively). This waste-Load assimilation study is not based on a verified model. The changes in stream water quality predicted by the model represent only possible stream responses to differing effluent conditions. Benthic-oxygen demand is probably the most significant factor affecting Little Laughery Creek and is probably responsible for the in-stream dis-solved-oxygen concentration being less than the Indiana stream dissolved-oxygen standard (5.0 milligrams per liter) during two water-quality surveys. After municipal dischargers complete advanced waste-treatment facilities, benthic-oxygen demand should be less significant in the stream dissolved-oxygen dynamics.

Indiana↗

USGS2016

The Aleutian-Bering Climate Vulnerability Assessment

Recent efforts to develop downscaled climate projections for the Bering Sea and Aleutians created an opportunity to better assess regional vulnerability to climate change. The Aleutian Bering Climate Vulnerability Assessment (ABCVA) was launched in 2014 to bring together regional science expertise and stakeholder interests in a rapid evaluation of the implications of future climate projections. This effort followed an internationally accepted but flexible pathway to develop practical, priority research topics that address ecosystem and community vulnerabilities. The ABCVA was completed as a partnership between the Aleutian and Bering Sea Islands Landscape Conservation Cooperative (ABSI LCC), the Alaska Climate Science Center and the Alaska Ocean Observing System (AOOS), and ultimately brought together three linked objectives: 1. identify and assess selected climate vulnerabilities of key resources and ecosystem services in the Aleutian Islands and Bering Sea region 2. broadly engage managers and stakeholders about the implications of climate vulnerabilities in the region 3. help ABSI LCC and the Alaska Climate Science Center and AOOS prioritize future research investments and focus The ABCVA convened a group of 30 researchers with expertise ranging from anthropology to zooplankton to review climate projections and their implications for the Aleutians and Bering Sea. These experts worked in five topic-based teams to assess vulnerabilities of species and ecosystem services relative. Each team identified initial vulnerabilities and made recommendations for further research that would help managers and communities better understand the implications of the changing climate in this region.

Aleutian and Bering Sea Islands↗