Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Resources Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources

Is there a basin-centered gas accumulation in Cotton Valley group sandstones, Gulf Coast basin, U.S.A.?

The U.S. Geological Survey (USGS), in cooperation with the U.S. Department of Energy, is reevaluating the resource potential of selected domestic basin-centered gas accumulations. Basin-centered gas accumulations are characterized by presence of gas in extensive low-permeability (tight) reservoirs in which conventional seals and trapping mechanisms are absent, abnormally high or low reservoir pressures exist, and gas-water contacts are absent. In 1995, the USGS assessed one basin-centered gas play and two conventional plays within the trend of Jurassic and Cretaceous Cotton Valley Group fluvial-deltaic and barrier island/strand plain sandstones across the onshore northern Gulf of Mexico Basin. Detailed evaluation of geologic and production data provides new insights into these Cotton Valley plays. Two Cotton Valley sandstone trends are identified based on reservoir properties and gas-production characteristics. Transgressive blanket sandstones across northern Louisiana have relatively high porosity and permeability and do not require fracture stimulation to produce gas at commercial rates. South of this trend, and extending westward into eastern Texas, massive sandstones of the Cotton Valley trend exhibit low porosity and permeability and require fracture stimulation. The high permeability of Cotton Valley blanket sandstones is not conducive to the presence of basin-centered gas, but low permeability massive sandstones provide the type of reservoir in which basin-centered gas accumulations commonly occur. Data on source rocks, including burial and thermal history, are consistent with the interpretation of potential basin centered gas within Cotton Valley sandstones. However, pressure gradients throughout most of the blanket- and massive sandstone trends are normal or nearly normal, which is not characteristic of basin-centered gas accumulations. The presence of gas-water contacts in at least seven fields across the blanket-sandstone trend together with relatively high permeabilities and high gas-production rates without fracture stimulation indicate that fields in this trend are conventional. Within the tight massive-sandstone trend, permeability is sufficiently low that gas-water transition zones are vertically extensive and gas-water contacts either have not been encountered or are poorly defined. With increasing depth through these transition zones, gas saturation decreases and water saturation increases until eventually gas saturations become sufficiently low that, in terms of ultimate cumulative production, wells are noncommercial. Such progressive increase in water saturation with depth suggests that poorly defined gas-water contacts probably are present below the depth at which wells become noncommercial. The interpreted presence of gas-water contacts within the tight, Cotton Valley massive-sandstone trend suggests that gas accumulations in this trend, too, are conventional, and that a basin-centered gas accumulation does not exist within Cotton Valley sandstones in the northern Gulf Basin.

Louisiana, Texas↗

Assessment of undiscovered conventional oil and gas resources, onshore Claiborne Group, United Statespart of the northern Gulf of Mexico Basin

The middle Eocene Claiborne Group was assessed for undiscovered conventional hydrocarbon resources using established U.S. Geological Survey assessment methodology. This work was conducted as part of a 2007 assessment of Paleogene-Neogene strata of the northern Gulf of Mexico Basin, including the United States onshore and state waters (Dubiel et al., 2007). The assessed area is within the Upper Jurassic-CretaceousTertiary composite total petroleum system, which was defined for the assessment. Source rocks for Claiborne oil accumulations are interpreted to be organic-rich, downdip, shaley facies of the Wilcox Group and the Sparta Sand of the Claiborne Group; gas accumulations may have originated from multiple sources, including the Jurassic Smackover Formation and the Haynesville and Bossier shales, the Cretaceous Eagle Ford and Pearsall (?) formations, and the Paleogene Wilcox Group and Sparta Sand. Hydrocarbon generation in the basin started prior to deposition of Claiborne sediments and is currently ongoing. Primary reservoir sandstones in the Claiborne Group include, from oldest to youngest, the Queen City Sand, Cook Mountain Formation, Sparta Sand, Yegua Formation, and the laterally equivalent Cockfield Formation. A geologic model, supported by spatial analysis of petroleum geology data, including discovered reservoir depths, thicknesses, temperatures, porosities, permeabilities, and pressures, was used to divide the Claiborne Group into seven assessment units (AUs) with three distinctive structural and depositional settings. The three structural and depositional settings are (1) stable shelf, (2) expanded fault zone, and (3) slope and basin floor; the seven AUs are (1) lower Claiborne stable-shelf gas and oil, (2) lower Claiborne expanded fault-zone gas, (3) lower Claiborne slope and basin-floor gas, (4) lower Claiborne Cane River, (5) upper Claiborne stable-shelf gas and oil, (6) upper Claiborne expanded fault-zone gas, and (7) upper Claiborne slope and basin-floor gas. Based on Monte Carlo simulation of justified input parameters, the total estimated mean undiscovered conventional hydrocarbon resources in the seven AUs combined are 52 million bbl of oil, 19.145 tcf of natural gas, and 1.205 billion bbl of natural gas liquids. This article describes the conceptual geologic model used to define the seven Claiborne AUs, the characteristics of each AU, and the justification behind the input parameters used to estimate undiscovered resources for each AU. The great bulk of undiscovered hydrocarbon resources are predicted to be nonassociated gas and natural gas liquids contained in deep (mostiy >12,000-ft [3658 m], present-day drilling depths), overpressured, structurally complex outer shelf or slope and basin-floor Claiborne reservoirs. The continuing development of these downdip objectives is expected to be the primary focus of exploration activity for the onshore middle Eocene Gulf Coast in the coming decades. ?? 2010 U.S. Geological Survey. All rights reserved.

American Association of Petroleum Geologists Bulle↗

Petroleum geology and resources of the Amu-Darya basin, Turkmenistan, Uzbekistan, Afghanistan, and Iran

The Amu-Darya basin is a highly productive petroleum province in Turkmenistan and Uzbekistan (former Soviet Union), extending southwestward into Iran and southeastward into Afghanistan. The basin underlies deserts and semideserts north of the high ridges of the Kopet-Dag and Bande-Turkestan Mountains. On the northwest, the basin boundary crosses the crest of the Karakum regional structural high, and on the north the basin is bounded by the shallow basement of the Kyzylkum high. On the east, the Amu-Darya basin is separated by the buried southeast spur of the Gissar Range from the Afghan-Tajik basin, which is deformed into a series of north-south-trending synclinoria and anticlinoria. The separation of the two basins occurred during the Neogene Alpine orogeny; earlier, they were parts of a single sedimentary province. The basement of the Amu-Darya basin is a Hercynian accreted terrane composed of deformed and commonly metamorphosed Paleozoic rocks. These rocks are overlain by rift grabens filled with Upper Permian-Triassic rocks that are strongly compacted and diagenetically altered. This taphrogenic sequence, also considered to be a part of the economic basement, is overlain by thick Lower to Middle Jurassic, largely continental, coal-bearing rocks. The overlying Callovian-Oxfordian rocks are primarily carbonates. A deep-water basin surrounded by shallow shelves with reefs along their margins was formed during this time and reached its maximum topographic expression in the late Oxfordian. In Kimmeridgian-Tithonian time, the basin was filled with thick evaporites of the Gaurdak Formation. The Cretaceous-Paleogene sequence is composed chiefly of marine clastic rocks with carbonate intervals prominent in the Valanginian, Barremian, Maastrichtian, and Paleocene stratigraphic units. In Neogene time, the Alpine orogeny on the basin periphery resulted in deposition of continental clastics, initiation of new and rejuvenation of old faults, and formation of most structural traps. A single total petroleum system is identified in the Amu-Darya basin. The system is primarily gas prone. Discovered gas reserves are listed by Petroconsultants (1996) at about 230 trillion cubic feet, but recent discoveries and recent reserve estimates in older fields should increase this number by 40 to 50 trillion cubic feet. Reserves of liquid hydrocarbons (oil and condensate) are comparatively small, less than 2 billion barrels. Most of the gas reserves are concentrated in two stratigraphic intervals, Upper Jurassic carbonates and Neocomian clastics, each of which contains about one-half of the reserves. Reserves of other stratigraphic units?from Middle Jurassic to Paleogene in age?are relatively small. Source rocks for the gas are the Lower to Middle Jurassic clastics and coal and Oxfordian basinal black shales in the east-central part of the basin. The latter is probably responsible for the oil legs and much of the condensate in gas pools. Throughout most of the basin both source-rock units are presently in the gas-window zone. Traps are structural, paleogeomorphic, and stratigraphic, as well as a combination of these types. The giant Dauletabad field is in a combination trap with an essential hydrodynamic component. Four assessment units were identified in the total petroleum system. One unit in the northeastern, northern, and northwestern marginal areas of the basin and another in the southern marginal area are characterized by wide vertical distribution of hydrocarbon pools in Middle Jurassic to Paleocene rocks and the absence of the salt of the Gaurdak Formation. The other two assessment units are stratigraphically stacked; they occupy the central area of the basin and are separated by the regional undeformed salt seal of the Gaurdak Formation. The largest part of undiscovered hydrocarbon resources of the Amu-Darya basin is expected in older of these assessment units. The mean value of total assessed resources of the Amu-Darya basin is estimated

Bulletin↗

Airborne remote sensing for geology and the environment; present and future

In 1988, a group of leading experts from government, academia, and industry attended a workshop on airborne remote sensing sponsored by the U.S. Geological Survey (USGS) and hosted by the Branch of Geophysics. The purpose of the workshop was to examine the scientific rationale for airborne remote sensing in support of government earth science in the next decade. This report has arranged the six resulting working-group reports under two main headings: (1) Geologic Remote Sensing, for the reports on geologic mapping, mineral resources, and fossil fuels and geothermal resources; and (2) Environmental Remote Sensing, for the reports on environmental geology, geologic hazards, and water resources. The intent of the workshop was to provide an evaluation of demonstrated capabilities, their direct extensions, and possible future applications, and this was the organizational format used for the geologic remote sensing reports. The working groups in environmental remote sensing chose to present their reports in a somewhat modified version of this format. A final section examines future advances and limitations in the field. There is a large, complex, and often bewildering array of remote sensing data available. Early remote sensing studies were based on data collected from airborne platforms. Much of that technology was later extended to satellites. The original 80-m-resolution Landsat Multispectral Scanner System (MSS) has now been largely superseded by the 30-m-resolution Thematic Mapper (TM) system that has additional spectral channels. The French satellite SPOT provides higher spatial resolution for channels equivalent to MSS. Low-resolution (1 km) data are available from the National Oceanographic and Atmospheric Administration's AVHRR system, which acquires reflectance and day and night thermal data daily. Several experimental satellites have acquired limited data, and there are extensive plans for future satellites including those of Japan (JERS), Europe (ESA), Canada (Radarsat), and the United States (EOS). There are currently two national airborne remote sensing programs (photography, radar) with data archived at the USGS' EROS Data Center. Airborne broadband multispectral data (comparable to Landsat MSS and TM but involving several more channels) for limited geographic areas also are available for digital processing and analysis. Narrow-band imaging spectrometer data are available for some NASA experiment sites and can be acquired for other locations commercially. Remote sensing data and derivative images, because of the uniform spatial coverage, availability at different resolutions, and digital format, are becoming important data sets for geographic information system (GIS) analyses. Examples range from overlaying digitized geologic maps on remote sensing images and draping these over topography, to maps of mineral distribution and inferred abundance. A large variety of remote sensing data sets are available, with costs ranging from a few dollars per square mile for satellite digital data to a few hundred dollars per square mile for airborne imaging spectrometry. Computer processing and analysis costs routinely surpass these expenses because of the equipment and expertise necessary for information extraction and interpretation. Effective use requires both an understanding of the current methodology and an appreciation of the most cost-effective solution.

Bulletin↗

Stratiform barite deposits in the Roberts Mountains allochthon, Nevada: A review of potential analogs in modern sea-floor environments

The United States is a net importer of barite, a critical mineral for the oil and gas industry; more than 80 percent of current domestic consumption of barite is imported from China. Nearly all of the domestic production of barite comes from stratiform deposits in Nevada. The 'modern analogs' approach adopted in this review can contribute to improving deposit models and the long-term resource picture in the United States. Massive barite deposits in Nevada are interlayered with deep-water siliceous sedimentary strata of Paleozoic age within the Roberts Mountains Allochthon. Although the barite deposits formed along the long-lived, tectonically active margin of western North America before the Antler orogeny, uncertainty still exists regarding key aspects of their genesis, especially with respect to tectonic setting and depositional processes. Proposed tectonic settings include a continental slope adjacent to an ocean basin, and a rifted basin formed on continental crust. A margin dominated by other stress configurations and strike-slip faulting may also have been present during the Paleozoic. Hypotheses for the genesis of sediment-hosted, stratiform barite deposits in Nevada can be grouped into two categories: (1) a synsedimentary hydrothermal model and (2) an ocean-circulation/productivity-zone model. Both models include a stage involving bacterial reduction of seawater sulfate. Disseminated, diagenetic, and hydrothermal barite deposits are widespread features of the modern ocean. In the Pacific Ocean, disseminated barite deposits (max 9 weight percent BaSO4) are forming below high-productivity zones (for example, in equatorial belts) and on the flanks of ocean ridges (as fallout of 'black smoker' particles). Massive barite deposits of diagenetic (in the subsea floor and at cold seeps) and hydrothermal origins are present in several sediment-covered tectonic settings, including ocean ridges (Escanaba Trough and Guaymas Basin), oceanic transform faults (Blanco Fracture Zone), marginal basins (Sea of Okhotsk), convergent margins (Peru, Oregon, Alaska), and transform margins (California Continental Borderland). Both hydrothermal and diagenetic barite deposits may be present in some environments (for example, the California California Borderland). On the basis of a consideration of tectonic settings and a comparison of deposit attributes (associated rock types, size, structure), mineralogy (BaSO4 content, SiO2 content), and geochemistry (S- and Sr-isotopic ratios) for modern and ancient massive barite deposits, cold seeps along transform margins (or, possibly, marginal basins) represent the most promising present-day metallogenetic analogs for stratiform barite. Hydrothermal systems can also produce high-grade barite, but the ubiquity of associated sulfide mineralization on the modern sea floor (and the paucity of sulfides in Nevada deposits) is problematic. On the basis of data from modern barite deposits, the presence of vent-specific faunas (tubeworms) and the variation in d34S values for barite (related to bacterial reduction of seawater sulfate) may not permit discrimination between a diagenetic or hydrothermal origin for ancient barite deposits.

Nevada↗

Geology and ground-water resources of Cerro Gordo County, Iowa

The basic geologic framework underlying Cerro Gordo County consists of an igneous or metamorphic Precambrian basement complex overlain by, in ascending order, consolidated sedimentary rocks of Precambrian, Cambrian, Ordovician, Devonian, Mississippian, and Cretaceous age, and unconsolidated sand, gravel, and clay of Quaternary age. Structurally the county is in the northern part of the Iowan Basin, and the sedimentary units of Cambrian through Devonian age dip southward at 9 to 14 feet per mile. Three major glacial advances, the Nebraskan, Kansan, and Wisconsin, covered all or part of the county during the Pleistocene Epoch and left behind glacial drift consisting of 0 to 125 feet of till and related outwash deposits. De posits of Holocene age, aside from surficial soil, are thin and scattered. Ground water occurs in the sedimentary units of Cambrian through Mississippian age and in the glacial drift and outwash deposits of Quaternary age. The chief aquifers, in ascending order, are the deep Cambrian sandstones, Jordan aquifer, St. Peter Sandstone, Devonian and Mississippian limestones and dolomites, and the Pleistocene glacial drift and related interglacial deposits. Units between the St. Peter Sandstone and the Devonian limestones, the Platteville, Decorah, Galena, and Maquoketa Formations, are of low permeability and are considered to be an aquiclude in comparison to the overlying and under lying units. The deep Cambrian sandstones will yield about 60 gpm (gallons per minute) to an individual well; the Jordan aquifer about 1,200 gpm; the St. Peter Sandstone 30 to 200 gpm; the Devonian limestones and dolomites 120 to 200 gpm; and the glacial outwash or shallow bedrock generally will yield 10 gpm or more. The Jordan aquifer supplies large quantities of water for municipal and industrial use at Mason City. Pumping tests on wells tapping the Jordan in that area show that the aquifer has a transmissibility of about 35,000 gallons per day per foot and a storage coefficient of 2 x 10 -4 Pumping in the Mason City area from 1912 to 1969 has produced about 200 feet of draw down in the areas of maximum withdrawal. Ground water in Cerro Gordo County is of suitable chemical quality for domestic, industrial, or municipal use. The total dis solved solids ranges from 152 mg/l (milligrams per liter) in water from the shallow bedrock to 885 mg/l in water from the deep Cambrian sandstones. Water from the Jordan, which is the most productive aquifer in the county, generally contains less than 500 mg/l dissolved solids. Ground water is the major source of water supplies throughout Cerro Gordo County. The majority of wells in the county are used for domestic and stock supplies, but the largest withdrawals of water are for municipal and industrial supplies. Municipal pumpage in the county in 1968 was about 1.5 billion gallons; industrial pumpage was about 1.8 billion gallons and most of the water was obtained from the Jordan aquifer. If future development of water from the Jordan aquifer is to be to the best economical advantage, careful consideration should be given to the location, capacity, and pumping schedules of proposed wells and nearby existing wells so that local overdevelopment or excessive interference do not occur.

Iowa↗

Geology and ground-water resources of Wichita and Greeley Counties, Kansas

This report describes the geography, geology, and ground-water resources of Wichita and Greeley counties in western Kansas. The area consists of a flat to gently rolling plain, which slopes eastward [at] about 15 feet per mile. A short reach of Ladder Creek (Beaver) is the only perennially flowing stream in the two counties. Ephemeral streams, which flow only during and after heavy rains, are White Woman and Sand Creeks and the western reach of Ladder Creek. The climate is semiarid, the normal annual precipitation being about 17 inches in Wichita County and 16 inches in Greeley County. Agriculture is the principal occupation in the area, and wheat is the most important crop. A considerable area is irrigated; sugar beets and sorghums are the principal irrigated crops. The outcropping rocks range in age from late Cretaceous to Recent; the Smoky Hill chalk member of the Niobrara formation, which is exposed along White Woman Creek in western Greeley County, is the oldest. The Niobrara is almost everywhere overlain by the Ogallala formation of Pliocene age. Generally the Ogallala is overlain by windblown silt of the Pleistocene Sanborn formation, but in places it is exposed along streams. The most recent deposits are dune sand and the alluvium along the streams. The Dakota formation, which is an important aquifer in parts of Kansas, is 300 to 450 feet beneath the Niobrara formation. The ground water that is available to wells in Wichita and Greeley counties is derived entirely from precipitation in the area or in areas immediately west and north. Ground water moves in a generally easterly direction with a gradient that varies inversely with the permeability of the water-bearing beds. The ground-water reservoir is recharged principally by precipitation within the area or within adjacent areas, Ground-water discharge takes place principally by pumping from wells, subsurface outflow, and evaporation and transpiration. Most of the domestic, stock, public, and irrigation supplies are obtained from wells. It is estimated that probably more than 2 billion gallons of water is pumped annually from wells in the area. Since 1947, ground-water recharge has been about equal to ground-water discharge. The use of ground water for irrigation has increased greatly since 1946 and indications are that many more wells may be drilled and pumped without dangerously lowering the water table. Approximately 11,000 to 12,000 acres were irrigated in 1951. A map showing the thickness of water-bearing materials indicates that although much of the area has enough water-bearing material to support irrigation wells, parts of Wichita and Greeley counties have little or none. The Ogallala is the principal water-bearing formation in the area. Small amounts of water may also be obtained locally from alluvial deposits and from cracks in the Niobrara formation. Two deep test wells to the Dakota formation have been drilled but, because of the poor quality of the water, have never been used. The ground water in Wichita and Greeley counties, though hard, is suitable for most purposes. Water from the Ogallala is generally high in fluoride and in some cases may be injurious to the teeth of children. Water from the Dakota, though soft, is unfit for irrigation because of a high content of sodium. The field data upon which most of this report is based are given in tables; they include records of 417 wells, chemical analyses of 31 samples of water, and logs of 57 test holes and wells.

Kansas Geological Survey Bulletin↗

Subsurface geology and oil and gas resources of Osage County, Oklahoma. Part 8, Parts of township 20 north, ranges 9 and 10 east, and township 21 north, ranges 8 and 9 east and all of township 21 north, range 10 east

The area whose subsurface geology and oil and gas resources are described in this report lies along the southern border of Osage County, Okla., and includes parts of T. 20 N., Rs. 9 and 10 E., and of T. 21 N., Rs. 8 and 9 E., and all of T. 21 N., R. 10 E. The towns of Osage and Prue are within the area; Cleveland, which is a mile south of the Arkansas River, is not far beyond its southwestern limit; and Tulsa is 10 miles east of its southeast corner. The production of oil and gas from the many fields in the five townships began as early as 1905, and drilling has continued up to the present. Oil or gas is produced from 13 zones at depths ranging from 250 to 2,600 feet. Of these zones, one is in the Ordovician system, one is at the contact of the Mississippian and the Pennsylvanian series, and all others are in the Pennsylvanian series. The five townships lie within a region that contains many oil and gas fields in the Bartlesville sand; the Red Fork sand is oil-bearing in a narrow belt in T. 21 N., R. 8 E.; and oil and gas are produced in small areas from the Taneha, Skinner, Squirrel, Cleveland, Jones, and Layton sands, the Mussehem and Peoples sand zone, the Okesa, Torpedo, and Clem Creek sand zone, and the Big lime and Peru sand zone. The rocks dip westward across the five townships at an average rate of about 38 feet to the mile as measured on the top of the Oswego lime. This regional dip is interrupted, however, by many anticlines, domes, synclines, and structural basins. The subsurface crests of most of the domes and anticlines are not directly under the crests as determined on the exposed rocks, and the dips of the deeper rocks are steeper and the structural closures greater in the buried rocks than in the exposed rocks. The exposed rocks are cut by several faults that trend northwest, but the data are insufficient to determine whether the deeply buried rocks, also, are displaced along the faults. This investigation has shown that there are a few localities not yet completely tested in this part of Osage County that may produce oil and gas and that a few producing oil fields have areas within or adjacent to them that have not been thoroughly prospected. It is pointed out that yields of oil and gas from limy reservoir rocks may be increased by acid treatment and that additional oil may be produced from some of the reservoir sands by repressuring them with gas or flooding them with water.

Oklahoma↗

Estimating the magnitude of the 100-year peak flow in the Big Lost River at the Idaho National Engineering and Environmental Laboratory, Idaho

Accurate estimates of peak flows in the Big Lost River at the Idaho National Engineering and Environmental Laboratory (INEEL) are needed to assist planners and managers with evaluating possible effects of flooding on facilities at the INEEL. A large difference of 4,350 cubic feet per second (ft 3 /s) between two previous estimates of the magnitude of the 100-year peak flow in the Big Lost River near the western boundary of the INEEL prompted the present study. Regression models that compared annual peak flows and attenuation of annual peak flows between successive gaging stations for the same flow event were used to estimate the magnitude of the 100-year peak flow in the Big Lost River. The 100-year peak flow of 4,790 ft 3 /s at the Howell Ranch gaging station was used as the starting point for this analysis. This estimate was determined by using a three-parameter log-Pearson Type III distribution as outlined in “Guidelines for Determining Flood Flow Frequency” (Bulletin 17B by the Interagency Advisory Committee on Water Data). The regression models indicated that, in the reach of the Big Lost River between Howell Ranch and Mackay Reservoir, downstream peak flows are lower than upstream peak flows. Peak-flow attenuation values for this reach of the river decreased nonlinearly as the magnitude of the peak flow increased. Extrapolation of the trend resulted in an attenuation estimate of 13 percent for this reach relative to the 100-year peak flow at the Howell Ranch gaging station. In the lower reach of the Big Lost River between Mackay Reservoir and Arco, downstream peak flows are also lower than upstream peak flows. However, in contrast to the upper reach, peak-flow attenuation values decreased linearly as the magnitude of the peak flow increased. Extrapolation of the data indicated that peak-flow attenuations in this reach of the river approach zero for flows approaching the 100-year peak-flow estimate immediately upstream and downstream from Mackay Reservoir. A regression model of annual maximum daily mean flows between Arco and the INEEL diversion dam indicated that the attenuation values in this reach of the river are nearly the same for all flows of record. Extrapolation of the linear regression of these values resulted in an attenuation estimate of 10 percent. Seepage measurements made during 1951–53 also resulted in a loss estimate of approximately 10 percent. This attenuation value, combined with the values from analyses of the upstream reaches, resulted in an estimate of the 100-year peak flow for the Big Lost River immediately upstream from the INEEL diversion dam of 3,750 ft 3 /s; upper and lower 95-percent confidence limits were 6,250 ft 3 /s and 1,300 ft 3 /s, respectively. Localized rainfall, even of high intensity, is not likely to produce large peak flows at the INEEL because of high loss rates (infiltration, bank storage, and channel storage) along much of the stream channel. The relatively short flow durations resulting from rainstorms historically have not provided sufficient volumes of water to satisfy local storage demands (bank and channel storage). Only after these storage demands are met do the loss rates decrease enough for significant peak flows to reach the INEEL site. An uncertain component of the present analysis is the effect of seismic activity on the 100-year peak-flow estimate. Analysis of the effect of the magnitude 7.3 Borah Peak earthquake in 1983 on normal flow conditions in the Big Lost River suggests that the joint occurrence of a large earthquake and a 100-year peak flow could significantly increase the magnitude of the peak flow at the INEEL.

Idaho↗

Geology and ground-water resources of the island of Niihau, Hawaii

Niihau lies 17 1 / 2 miles southwest of Kauai. Its area is 72 square miles, and its highest point has an altitude of 1,281 feet. The population is about 180, chiefly Hawaiians. The annual rainfall at Kiekie, the ranch headquarters, generally ranges between 18 and 26 inches. The chief industries are the raising of sheep and cattle and production of honey. The island is privately owned. The main mass of the island is composed of a deeply weathered remnant of a basalt dome of Tertiary age, cut by a dike complex trending NE-SW. These Tertiary rocks are herein named the Paniau volcanic series. The central vent lay about 2 miles out to sea to the east of the present island. The dome, after deep gulches were cut into it by stream erosion and it was cliffed all around by the sea, was partly submerged. During Pleistocene time a broad wave-cut platform on the north, west, and south sides was built above sea level and widened by the eruption of lavas and tuffs, from 9 vents now visible and other vents now buried, to form a low coastal plain. These Pleistocene volcanic rocks are named the Kiekie volcanic series. Ash from Lehua Island, a Pleistocene tuff cone, has been drifted into duties on the north end of Niihau. Lithified dunes that extend below sea level, and the small outcrops of emerged fossiliferous limestone above sea level, indicate the plus 100-foot, minus 60-foot, plus 25-foot, and plus 5-foot eustatic stands of the sea correlative with changes in the volume of the polar ice caps and concurrent changes in the configuration of ocean basins. Calcareous dune and beach deposits, short stretches of nullipore reef and beach rock, and playa and alluvial deposits constitute the Recent rocks. No perennial streams exist on the island but about a dozen playa lakes, fresh or brackish during rainy weather, lie on the plain. The domestic water supply is rain caught from roofs. Only three wells on the island yield water with less than 25 grains of salt per gallon (260 parts per million of chloride). Typically, water holes for stock are about 15 feet across, 5 feet deep, and 8 feet wide. They have been dug in the lowlands where the depth to water is usually less than 5 feet. Forty-six dug wells and water holes exist, the water of some of which has become too salty for stock. Two or three deep wells were drilled 500 to 1,000 feet below sea level, but they encountered salty water. Three wells, not yet used, have been excavated in the Tertiary basalts. One of them has an infiltration tunnel at the bottom. Two seeps perched on vitric tuff beds more than 500 feet above sea level carry large quantities of salt leached from spray that falls on their recharge areas. Several sites are recommended for developing additional water for stock. The island, however, will always be short of domestic water because of aridity, unfavorable geologic structures, continuous deposition of salt spray, and abundant authigenic salts in the lake beds. Among the lavas of the Paniau volcanic series, of Tertiary age, olivine basalts probably predominate but ordinary basalts are abundant. Picrite-basalt of the primitive type, containing abundant olivine phenocrysts, also occurs. Andesites are probably present but are rare. Most of the lavas of the Kiekie volcanic series, of Pleistocene age, are olivine basalt, but one is transitional between olivine basalt and picrite-basalt. In many of the Pleistocene lavas the late-crystallized augite is titanian. A single occurrence of melilite-nepheline basalt has been reported. Chemical analyses of five rocks are listed.

Hawaii↗

Iron-ore resources of the United States including Alaska and Puerto Rico, 1955

The importance of iron ore, the basic raw material of steel, as a fundamental mineral, resource is shown by the fact that about 100 million long tons of steel is used annually in the economy of the United States, as compared with a combined total of about 5 million long tons of copper, lead, zinc, and aluminum. Satisfying this annual demand for steel requires about 110 million tons of iron ore and 70 million tons of scrap iron and steel. The average annual consumption of iron ore in the United States from 1951 to 1955, inclusive, was about 110 million long tons, which is about twice the annual average from 1900 to 1930. Production of iron ore in the United States in this 5-year period averaged approximately 100 million long tons annually, divided by regions as follows (in percent): Lake Superior, 84.1; southeastern, 6.7; western, 6.7; northeastern, 1.4; and central and gulf, 1.1. Mining of iron ore began in the American Colonies about 1619, and for 225 years it was limited to eastern United States where fuel and markets were readily available. Production of iron ore from the Lake Superior region began in 1846; the region became the leading domestic source by 1890, and the Mesabi range in Minnesota has been the world's most productive area since 1896. Proximity of raw materials, water transportation, and markets has resulted in centralization of the country's iron and steel industry in the lower Great Lakes area. Increased imports of iron ore being delivered to eastern United States as well as demands for steel in nearby markets have given impetus to expansion in the steel-making capacity in this area. The four chief iron-ore minerals - hematite, liminite, magnetite, and siderite - are widely distributed but only locally form deposits of sufficient tonnage and grade to be commercially valuable at the present time. The iron content of these minerals, of which hematite is the most important, ranges from 48 percent in siderite to 72 percent in magnetite, but as these minerals are associated with other rock-forming minerals, the iron content of marketable ore has a lower range from 30 to 67 percent. Chemical constituents other than iron also are important in determining the marketability of iron ore. Although some iron ores can be used in the blast furnace as mined, others must first be improved either chemically by reduction of undesirable constituents, or physically by aggregation. Phosphorus and sulfur particularly are common deleterious elements; excessive silica is also undesirable but within certain limits can be controlled by additional flux. Lime and magnesia are beneficial in specified amounts because of their fluxing qualities, and a small amount of alumina improves the fluidity of slag. Manganese is especially desirable as a deoxidizing and desulfurizing agent. Titanium, chromium, and nickel must also be considered in the use of ore containing these elements. The principal iron-ore deposits in the United States have been formed by three processes. Hematite-bearing bedded deposits such as those at Birmingham, Ala., are marine sedimentary rocks which, except for weathering along the outcrop, have remained practically unaltered since deposition. Deposits of the Lake Superior region, also in sedimentary strata, originally had a slightly lower iron content than those at-Birmingham, but ore bodies of hematite and limonite were formed by removal of other constituents in solution after deposition of the beds, with a relative increase of iron content in the material remaining. Limestone adjacent to igneous intrusions has been replaced by magnetite deposits at Cornwall, Pa., and by hematite-magnetite deposits near Cedar City, Utah. Magnetite deposits in New Jersey and in the Adirondack Mountains of New York are generally believed to have been formed by replacement of grains of other minerals in metamorphic rocks. Iron-ore resources are made up of reserves of iron ore, material usable under existing economic and technologic conditions; and potential ore, material likely to become usable under more favorable conditions. The tonnage and grade of material of combined reserves and potential ore in each of the deposits known or believed to contain at least 200,000 long tons of iron-ore resources are tabulated in this report, and numerous sources of additional information are given in a selected bibliography. The total domestic iron-ore resources are estimated at approximately 75,000 million long tons of crude ore. About 10,000 million tons of the resources is reserves of crude ore that will probably yield 5,500 million tons of concentrates and direct-shipping ore. About 65,000 million tons is potential ore and may yield 25,000 million tons of concentrates and some direct-shipping ore.

Bulletin↗

Geology and ground-water resources of the island of Molokai, Hawaii

The island of Molokai is the fifth largest of the Hawaiian Islands, with an area of 250 square miles. It lies 25 miles southeast of Oahu, and 8.5 miles northwest of Maui. It consists of two principal parts, each a major volcanic mountain. East Molokai rises to 4,970 feet altitude. It is built largely of basaltic lavas, with a thin cap of andesites and a little trachyte. The volcanic rocks of East Molokai are named the East Molokai volcanic series, the basaltic part being separated as the lower member of the series, and the andesites and trachytes as the upper member. Large cinder cones and bulbous domes are associated with the lavas of the upper member. Thin beds of ash are present locally in both members. The lavas of the lower member are cut by innumerable dikes lying in two major rift zones trending eastward and northwestward. A large caldera, more than 4 miles long, and a smaller pit 0.8 mile across existed near the summit of the volcano. The rocks formed in and under the caldera are separated on plate 1 as the caldera complex. Stream erosion has cut large amphitheater-headed valleys into the northern coast of East Molokai, exposing the dikes and the caldera complex. West Molokai is lower than East Molokai, rising to 1,380 feet altitude. It was built by basaltic lavas erupted along rift zones trending southwestward and northwestward. Many of the flows were unusually fluid. The volcanic rocks of West Molokai Volcano are named the West Molokai volcanic series. Along its eastern side, the mountain is broken by a series of faults along which its eastern edge has been dropped downward. West Molokai Volcano became extinct earlier than East Molokai Volcano, and its flank is partly buried beneath lavas of East Molokai. Both volcanic mountains were built upward from the sea floor probably during Tertiary time. Following the close of volcanic activity stream erosion cut large canyons on East Molokai, but accomplished much less on drier West Molokai. Marine erosion attacked both parts of the island, producing high sea-cliffs on the windward coast. In late Tertiary or early Pleistocene time the island was submerged to a level at least 560 feet above the present shore line, then reemerged. Later shifts of sea level, probably partly resulting from Pleistocene glaciation and deglaciation, ranged from 300 feet below to 100 feet or more above present sea level. Marine deposits on the southern slope extend to an altitude of at least 200 feet. Eruption of the Kalaupapa basalt built a small lava cone at the foot of the northern cliff, forming Kalaupapa peninsula; and a small submarine eruption off the eastern end of Molokai built the Mokuhooniki tuff cone, the fragments of which now form Hooniki and Kanaha Islands. Deposition of marine and fluviatile sediments has built a series of narrow flats close to sea-level along the southern coast. Nearly the entire island is underlain, close to sea level, by ground water of the basal zone of saturation. Beneath West Molokai, the Hoolehua Plain between West and East Molokai, and the southern coastal area of East Molokai, the basal water is brackish. Beneath much of East Molokai, fresh basal water is obtainable. Small amounts of fresh water are perched at high levels in East Molokai by thin poorly permeable ash beds. Fresh water is confined at high levels in permeable compartments between poorly permeable dikes in the rift zones of East Molokai, and can be developed by tunnels. Projects to bring the abundant surface and ground water of the large wind ward valleys to the Hoolehua Plain are described. Future developments are suggested. All wells and water-development tunnels are described in tables.

Hawaii↗

Developing an outcome-based biodiversity metric in support of the field to market project: Final report

Our objective was to create a metric that would calculate the relative impact of common commercial agricultural practices on terrestrial vertebrate richness. We sought to define impacts in fields (including field borders) of the southeastern region’s commercial production of corn, wheat, soy, and cotton. The metric is intended to serve as an educational tool, allowing producers to see how operational decisions made at the field level impact overall vertebrate species richness and to explore decision impacts to targeted species groups (e.g. game, pest, or beneficial species). Agricultural landscapes are often mistakenly thought to be unsuitable habitat for most species. However, as demonstrated by results reported here, even large-scale, conventional agricultural producers are potentially important partners in biodiversity conservation. Many vertebrate species do inhabit agricultural landscapes, benefitting from the provision of water, food, or shelter within cultivated fields and their immediate borders (e.g., Holland et al. 2012). In the Southeastern US, of the 613 terrestrial vertebrate species modeled by the Southeast Gap Analysis Program (SEGAP) (http://www.basic.ncsu.edu/segap/index.html), 263 utilize row crop and associated agricultural land cover classes as potential habitat (Box 1). While some species may be sensitive to certain operational practices (e.g., tillage, pest management, or field border management practices), others are generally tolerant, and some may benefit either directly or indirectly. For example, field margins and ditches often serve as semi-natural habitats providing foraging resources and shelter for vertebrates and are shown to positively influence species richness and abundance (Billeter et al. 2007; Herzon & Helenius 2008; Marshall & Moonen 2002; Shore et al. 2005; Weibull et al. 2003; Wuczyńskia et al. 2011). Biodiversity responses are, therefore, complex, as an individual species’ responses to agricultural production practices depends on that animal’s resource specialization, mobility, and life history strategies (Jeanneret et al. 2003a, b; Jennings & Pocock 2009). The knowledge necessary to define the biodiversity contribution of agricultural lands is specialized, dispersed, and nuanced, and thus not readily accessible. Given access to clearly defined biodiversity tradeoffs between alternative agricultural practices, landowners, land managers and farm operators could collectively enhance the conservation and economic value of agricultural landscapes. Therefore, Field to Market: The Keystone Alliance for Sustainable Agriculture and The Nature Conservancy jointly funded a pilot project to develop a biodiversity metric to integrate into Field to Market’s existing sustainability calculator, The Fieldprint Calculator (http://www. fieldtomarket.org/). Field to Market: The Keystone Alliance for Sustainable Agriculture is an alliance among producers, agribusinesses, food companies, and conservation organizations seeking to create sustainable outcomes for agriculture. The Fieldprint Calculator supports the Keystone Alliance’s vision to achieve safe, accessible, and nutritious food, fiber and fuel in thriving ecosystems to meet the needs of 9 billion people in 2050. In support of this same vision, our project provides proof-of-concept for an outcome-based biodiversity metric for Field to Market to quantify biodiversity impacts of commercial row crop production on terrestrial vertebrate richness. Little research exists examining the impacts of alternative commercial agricultural practices on overall terrestrial biodiversity (McLaughlin & Mineau 1995). Instead, most studies compare organic versus conventional practices (e.g. Freemark & Kirk 2001; Wickramasinghe et al. 2004), and most studies focus on flora, avian, or invertebrate communities (Jeanneret et al. 2003a; Maes et al. 2008; Pollard & Relton 1970). Therefore, we used an expert-knowledge-based approach to develop a metric that predicts expected impacts to shelter and forage resources, individual species, and overall biodiversity (species richness). This approach is modeled after an ecosystems services concept (WRI 2005), except that we examine services (i.e., resources) provided to vertebrate wildlife rather than service provided to the human population. SEGAP predicts species that are potentially present in an area given landscape-scale habitat availability, configuration, and context (e.g., patch size, proximity to resources, connectivity, potential for disturbance). Based on the prediction of species that may be potentially present, the impacts of management decisions within fields and around their borders can be analyzed based on the impact of those practices to the availability of species’ resources. The final metric provides an index of a producer’s relative impact, but perhaps even more importantly, the underlying database allows producers to explore details such as which species are most impacted or how alternative decisions would impact their score.

Technical Bulletin↗

Geology and ground-water resources of Linn County, Iowa

Linn County, in east-central Iowa, covers about 713 square miles and lies in the Western Young Drift section of the Central Lowlands physiographic province. The normal annual rainfall in the county is about 88 inches and the annual mean temperature is about 48°F. The population in 1960 was 136,899, of which 75 percent was urban. Ground water is a vital natural resource in Linn County-all municipal, farm-domestic, livestock, and most industrial supplies are obtained from this source. An estimated 24 mgd (million gallons per day) of ground water was used in the county in 1964. The principal aquifers are alluvium, buried channel deposits, Silurian-Devonian limestones and dolomites, and the Jordan Sandstone. All yield fair-to-good quality water, although the water is hard and locally contains high concentrations of iron. All are capable of yielding as much as 500 gallons or more per minute to wells. Alluvium has been developed for water supplies only at Cedar Rapids, where withdrawals in 1964 averaged 12 mgd for municipal supplies and 2.7 mgd for industrial supplies. The alluvial aquifer yields up to 2,000 gpm (gallons per minute) to wells in the Cedar Rapids well field. Similar yields from alluvium may be available along several reaches of the Cedar and Wapsipinicon Rivers. Smaller quantities are available from the alluvium of Prairie Creek. Alluvial aquifers are readily recharged by precipitation and induced infiltration. Buried channel deposits occur in preglacial or interglacial valleys that were carved into the bedrock. These old valleys, whose trends roughly parallel the present Cedar River and Prairie Creek, contain water-bearing alluvial deposits that are covered by glacial drift. Data from a few wells tapping these deposits indicate that yields of up to 500 gpm of good-quality water are available from this source. The most favorable areas for development of water supplies are those areas where the channel deposits underlie and receive recharge from the alluvium of the Cedar River and Prairie Creek. The Silurian-Devonian aquifer's county-wide occurrence, near-surface position, and ability to yield as much as several hundred gallons per minute of good-quality water makes it the most widely used aquifer in Linn County. During 1960-64, withdrawals averaged about 1.5 mgd for domestic-livestock use, about 0.6 mgd for small community use, and about 4 mgd for industrial-commercial use. Withdrawals are concentrated in the Cedar Rapids area, where 65 percent of the withdrawals from the aquifer occur. This concentrated pumpage has caused a progressive lowering of the aquifer's piezometric surface in downtown Cedar Rapids. During the past 70 years, water levels in wells in this locality have declined about 105 feet in the center of the cone of depression and about 26 feet about one mile from the cone's center. Water level in the center of the cone presently is declining at an average rate of 1 foot per year. Because the rate of decline in the same area was determined to have been 2 to 3 feet per year during the 1940's and 50's, the cone is believed to be stabilizing or pumpage is being reduced. The aquifer probably could withstand an additional 150 to 200 feet of piezometric lowering in the Cedar Rapids area, but individual wells would be adversely affected. The Jordan aquifer, which underlies the entire county, is considered to be the most isotropic and homogeneous aquifer in Linn County. Yields of 1,000 gpm or more of fair-to-good quality water from this source are believed to be available anywhere in the county. The aquifer is not yet developed extensively; an average of about 2.4 mgd was pumped during 1964 for industrial and municipal use in the Cedar Rapids-Marion area. The shallow bedrock and glacial drift aquifers yield only small quantities of good quality water. Their widespread extent and shallow depth, however, make them suitable for the development of small supplies for domestic and livestock use.

Iowa↗

Geology and Mineral Resources of the East Mojave National Scenic Area, San Bernardino County, California

The rocks of the East Mojave National Scenic Area (EMNSA) record a history of dynamic geologic events that span more than 1,800 million years (m.y.). These geologic events contributed significantly to development of the spectacular vistas and panoramas present in the area today. The oldest rocks underlie much of the northern part of the EMNSA. These rocks were subjected to extreme pressures and temperatures deep in the Earth's crust about 1,700 million years ago (Ma). They were subsequently intruded by granitic magmas from about 1,695 to 1,650 Ma, by additional granitic magmas at about 1,400 Ma and, later, at about 1,100 Ma, by iron-rich magmas that crystallized to form dark igneous rocks termed diabase. Unusual potassium- and magnesium-rich rocks, emplaced at about 1,400 Ma, crop out in a few places within and near the EMNSA. Their distinctive composition results from very small degrees of partial melting of mantle peridotite that was highly enriched in incompatible trace elements. At Mountain Pass, just outside the northeast boundary of the EMNSA, the potassium- and magnesium-rich rocks are accompanied by a rare type of carbonatite, an igneous rock composed of carbonate minerals, that contains high-grade rare earth element mineralization. Subsequent to these igneous-dominated events, sedimentary strata began to be deposited at about 1,000 Ma; mostly sandstone and shale were deposited initially in marine and, less commonly, in continental environments along the west edge of the core of the North American continent. Sedimentation eventually culminated in the widespread deposition of thick marine limestones from about 400 to about 245 Ma. These limestones represent a continental-shelf environment where shallow-water limestone formed to the east and deeper water limestone formed to the west. The end of the formation of these sedimentary deposits probably was caused by uplift of the shelf, which marked the beginning of a long period of tectonic upheaval. At about 170 Ma, widespread emplacement of coarse-grained granitic magmas began again in the region; some of these magmas also erupted as volcanic rocks. Additional episodes of magmatism took place at about 100 Ma and at 75 Ma. Most of the metallic-mineral occurrences in the EMNSA are associated with the igneous rocks that range in age from 170 to 75 Ma. During each of these magmatic events, the previously deposited sedimentary strata were buckled and broken as the entire region, part of a continental-scale fold and thrust belt, underwent crustal shortening and compression. A period of tectonic quiescence characterized the region from about 65 Ma to about 20 Ma. The quiet period ended abruptly with widespread volcanism along the southern and eastern parts of the EMNSA. The major gold deposits in the Castle Mountains are associated with this episode of volcanism. During this volcanic outburst, the crust extended laterally in several areas that border the EMNSA: along the lower Colorado River 65 km to the east, in the Kingston Range 20 km to the north, and in the central Mojave Desert 75 km to the southwest. This extensional deformation is characterized by the superposition of upper-crustal rocks over midcrustal rocks along large flat-lying faults, several of which project beneath rocks now exposed at the surface in the EMNSA. The near-surface rocks of the EMNSA, however, apparently escaped much of this intense extensional deformation. High-angle faults, which cut several of the mountain ranges, possibly have undergone several periods of movement, which date back to approximately 70 to 100 Ma. Some faults are of local importance to the physiographic development of the mountain ranges and intervening basins, and, in places, the faults seem to have localized various kinds of ore bodies and mineral occurrences. Volcanism and extensional deformation waned from 14 to 11 Ma. By approximately 10 Ma, widespread erosion had produced broad erosional dome-shaped mountains in the n

Bulletin↗

Uranium provinces of North America — Their definition, distribution, and models

Uranium resources in North America are principally in unconformity-related, quartz-pebble conglomerate, sandstone, volcanic, and phosphorite types of uranium deposits. Most are concentrated in separate, well-defined metallogenic provinces. Proterozoic quartz-pebble conglomerate and unconformity-related deposits are, respectively, in the Blind River–Elliot Lake (BRELUP) and the Athabasca Basin (ABUP) Uranium Provinces in Canada. Sandstone uranium deposits are of two principal subtypes, tabular and roll-front. Tabular sandstone uranium deposits are mainly in upper Paleozoic and Mesozoic rocks in the Colorado Plateau Uranium Province (CPUP). Roll-front sandstone uranium deposits are in Tertiary rocks of the Rocky Mountain and Intermontane Basins Uranium Province (RMIBUP), and in a narrow belt of Tertiary rocks that form the Gulf Coastal Uranium Province (GCUP) in south Texas and adjacent Mexico. Volcanic uranium deposits are concentrated in the Basin and Range Uranium Province (BRUP) stretching from the McDermitt caldera at the Oregon-Nevada border through the Marysvale district of Utah and Date Creek Basin in Arizona and south into the Sierra de Peña Blanca District, Chihuahua, Mexico. Uraniferous phosphorite occurs in Tertiary sediments in Florida, Georgia, and North and South Carolina and in the Lower Permian Phosphoria Formation in Idaho and adjacent States, but only in Florida has economic recovery been successful. The Florida Phosphorite Uranium Province (FPUP) has yielded large quantities of uranium as a byproduct of the production of phosphoric acid fertilizer. Economically recoverable quantities of copper, gold, molybdenum, nickel, silver, thorium, and vanadium occur with the uranium deposits in some provinces. Many major epochs of uranium mineralization occurred in North America. In the BRELUP, uranium minerals were concentrated in placers during the Early Proterozoic (2,500–2,250 Ma). In the ABUP, the unconformity-related deposits were most likely formed initially by hot saline formational water related to diagenesis (»1,400 to 1,330 Ma) and later reconcentrated by hydrothermal events at »1,280–»1,000, »575, and »225 Ma. Subsequently in North America, only minor uranium mineralization occurred until after continental collision in Permian time (255 Ma). Three principal epochs of uranium mineralization occurred in the CPUP: (1) » 210–200 Ma, shortly after Late Triassic sedimentation; (2) »155–150 Ma, in Late Jurassic time; and (3) » 135 Ma, after sedimentation of the Upper Jurassic Morrison Formation. The most likely source of the uranium was silicic volcaniclastics for the three epochs derived from a volcanic island arc at the west edge of the North American continent. Uranium mineralization occurred during Eocene, Miocene, and Pliocene times in the RMIBUP, GCUP, and BRUP. Volcanic activity took place near the west edge of the continent during and shortly after sedimentation of the host rocks in these three provinces. Some volcanic centers in the Sierra de Peña Blanca district within the BRUP may have provided uranium-rich ash to host rocks in the GCUP. Most of the uranium provinces in North America appear to have a common theme of close associations to volcanic activity related to the development of the western margin of the North American plate. The south and west margin of the Canadian Shield formed the leading edge of the progress of uranium source development and mineralization from the Proterozoic to the present. The development of favorable hosts and sources of uranium is related to various tectonic elements developed over time. Periods of major uranium mineralization in North America were Early Proterozoic, Middle Proterozoic, Late Triassic–Early Jurassic, Early Cretaceous, Oligocene, and Miocene. Tertiary mineralization was the most pervasive, covering most of Western and Southern North America.

Bulletin↗

Geology and ground-water resources of the islands of Lanai and Kahoolawe, Hawaii

Lanai lies 59 miles southeast of Honolulu, Oahu, has an area of 141 square miles, and is 3,370 feet high. (See fig. 1 and pl. 1.) Lanai City is the only town of importance. The island produces pineapples and cattle. The surface above about 1,200 feet is generally covered with lateritic soil, which reaches a maximum depth of about 50 feet. Below this level the island is partly devoid of vegetation and is strewn with boulders, the result of having been once submerged by the ocean to this depth. Traces of various emerged and submerged shore lines are described, the highest fossiliferous marine deposits being 1,070 feet above sea level. Lanai is an eroded extinct basaltic volcano built during one period of activity. No secondary eruptions occurred as on most of the other islands. It has three rift zones and a summit caldera. The summit plateau has resulted from collapse along the northwest rift zone. Elsewhere there is much evidence of faulting. About 100 faults and 275 dikes were recorded, but they are so close together in places that it was not possible to show them all on the map. The climate is semitropical, the mean annual temperature of Lanai City, altitude 1,620 feet, being 68° F. Because Lanai lies to the lee of Maui Island it is dry. The mean annual rainfall ranges from 38 inches on the summit to less than 10 inches on the coast. The windward (northeast) side is carved by streams into deep canyons. Maunalei Gulch has the only perennial stream, and it does not reach the sea. Ground water, the lifeblood of Lanai is scarce. Lanai City obtains some of its water supply by a tunnel from gravel in Maumalei Gulch. This water apparently rises from the dike complex in this gulch. The rest of the supply comes from a recently constructed shaft tapping the dike complex not far downstream. The total quantity of high-level ground water discharged by springs and tunnels ranges from about 600,000 gallons a day in wet weather to about 250,000 gallons a day in dry weather. The basal water, although potable, is fairly high in salt. Several sites are recommended for developing and conserving ground water. Kahoolawe Island is 11 miles long, 6 miles wide, 1,491 feet high, covers 45 square miles, and lies 94 miles southeast of Honolulu and 6 3 / 4 miles southwest of Maui. It is a shield-shaped extinct volcano composed chiefly of thin flows of primitive basalt poured in rapid succession from three rift zones and a vent at their intersection. At one stage the volcano was indented with a caldera about 3 miles across which was later completely filled. A graben led southwestward from it. The rocks are divided into Late Tertiary (?) or early Pleistocene(?) pre-caldera basalts, caldera-filling basalts and basaltic andesites, post-caldera basalts and andesites, and Recent post erosional basalts. A few thin vitric tuff beds and cinder cones were found. Marine erosion has cut cliffs as high as 800 feet along the east and south shores and exposed a cross section of the caldera. Only shallow ephemeral gulches exist. The entire summit has been eroded to a hard-pan surface by the wind as a result of the vegetation being destroyed by livestock. The island is semi-arid and well water is needed for stook: "The stook is now supplied entirely from storage of rain and flood waters. During droughts water is hauled by boat from the island of Maui. All the wells dug so far yield water that is too brackish for stock except at the fairly inaccessible south side of Kanapou Bay. The resistivity survey indicates a water table 1.5 feet or less above sea level for 2.25 miles inland. A few sites for wells are recommended in the dike complex where small supplies of water suitable for stock might be found. Petrographic studies by Gordon A. Macdonald indicate that the pre-caldera and caldera-filling lavas are largely normal olivine basalt of the type which forms the bulk of all Hawaiian volcanoes thus far investigated. It represents the undifferentiated magma of the Hawaiian petrographic province. Toward the close of the caldera-filling epoch the vent became less active, and magmatic differentiation produced basaltic andesites, which are interbedded with normal basalts. The post-caldera lavas are largely basaltic andesites and andesites. The much younger lavas, erupted after a period of extensive erosion, are olivine basalts similar in composition to the pre-caldera flows. The mineralogy of the Kahoolawe rocks is described in detail.

Hawaii↗

Groundwater flow model for Western Chippewa County–Including analysis of water resources related to industrial sand mining and irrigated agriculture

A groundwater flow model for western Chippewa County, Wisconsin, was developed by the Wisconsin Geological and Natural History Survey (WGNHS) and the U.S. Geological Survey (USGS) using the computer program MODFLOW. The model is the result of a five-year groundwater study commissioned by Chippewa County in 2012 to evaluate the effects of industrial sand mining and irrigated agriculture on the county’s water resources. The study incorporates existing data and newly acquired data from fieldwork conducted within the study area. The groundwater model may be useful for future investigations, such as evaluation of proposed high-capacity well sites, development of municipal wellhead protection plans, and studies that seek to further quantify surface water-groundwater relationships. The model conceptualizes the hydrostratigraphy of western Chippewa County as six stacked layers. Each layer is distinct, beginning with unlithified glacial material at the surface, and alternating between sandstones (that act as aquifers) and shale units (that serve as aquitards). The model is bounded below by Precambrian crystalline bedrock and its perimeter was derived from a regional-scale groundwater flow model. The MODFLOW model represented average conditions during 2011–2013 with “steady-state” assumptions, meaning that simulated water levels do not fluctuate seasonally or from year to year. Steady-state models simplify natural variability, making results of scenario simulations easier to interpret and compare while also maximizing effects of stressors because the simulated stress is always applied (not halted after a few months or years). Model calibration used the parameter estimation code (PEST), and calibration targets included heads (groundwater levels) and streamflows. Calibration focused on 2011–2013 because a large amount of head and streamflow data were available for that period. The MODFLOW model explicitly simulates all sources and sinks of water, including groundwater/surface-water interaction with streamflow routing. Model input included estimates of aquifer hydraulic conductivity and a spatial groundwater recharge distribution developed using a GIS-based soil-water-balance (SWB) model applied to the model area. Groundwater withdrawals were simulated for 269 high-capacity wells across the entire model domain, which includes western Chippewa County and adjacent portions of Dunn, Barron, and Rusk Counties. Collectively, these wells withdrew about 1.14 million gallons per year between 2011 and 2013. Once the model was calibrated, it was applied to two distinct scenarios of increased groundwater withdrawals: one evaluating hydrologic effects of more intensive industrial sand mining and the second evaluating the hydrologic effects of more intensive agricultural irrigation practices. Each scenario was developed with input from Chippewa County and a stakeholder group established expressly for this study. The scenarios were designed to represent reasonable future buildout conditions for both mining and irrigated agriculture. The mining scenario underscores the potential hydrologic effects related to changing land-use practices (i.e., hilltops and farmland becoming sand mines), while the irrigated agriculture scenario illustrates the potential hydrologic effects of intensifying existing land-use practices (i.e., installing new wells to irrigate farm fields). While each scenario evaluated distinctly different conditions, modeling results demonstrated the potential of both scenarios to lower the water table and reduce baseflows in headwater streams within the modeled area. In the case of irrigated agriculture, hydrologic effects were associated directly with groundwater withdrawals. By assuming that irrigation did not decrease, this steady-state simulation represented a sustained future effect. By contrast, hydrologic effects of industrial sand mining were the result of both groundwater withdrawals at mines and land-use changes that effectively reduced recharge to groundwater over distinct phases of active mining. This scenario included a post-mining phase, during which groundwater withdrawals stopped and mined areas were reclaimed to undeveloped prairie grass cover. If reclamation to undeveloped prairie indeed occurs as simulated, long-term increases in the water table and stream baseflows are possible. In this sense, the scenario representing build out of irrigated agriculture led to long-term baseflow declines while the future buildout of industrial sand mining led to declines that dissipated following mine reclamation to undisturbed prairie. Future investigations in similar hydrogeologic settings may find the following insights gleaned from this study useful: ❚❚ The characterization of hydrogeologic properties, delineation of hydrogeologic units, and calibration of groundwater flow models benefited from incorporation of accurate well construction reports, high-quality borehole geophysical logs, and streamflow gaging data. ❚❚ Infiltration testing performed in active mining areas provided evidence that reducing the degree and extent of compaction and enhancing areas designed to retain and infiltrate stormwater runoff could potentially reduce runoff and increase groundwater recharge. ❚❚ Similarly, reclaiming mined areas to prairie grasses would be expected to reduce runoff and increase groundwater recharge by reducing compaction and improving soil structure and vegetation that can slow runoff and enhance infiltration.

Wisconsin↗