Search USGS⌕ Search

SEARCH · Search USGS

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources
USGS2002

A review of the multiwell experiment in tight gas sandstones of the Mesaverde Group, Piceance Basin, Colorado

The Cretaceous Iles and Williams Fork Formations of the Mesaverde Group contain important reservoir and source rocks for basin-centered gas accumulations in the Piceance Basin of northwestern Colorado. The sandstones in these formations have very low permeability, so low that successful production of gas requires the presence of fractures. To increase gas production, the natural fracture system of these "tight gas sandstones" must be augmented by inducing artificial fractures, while minimizing the amount of formation damage due to introduced fluids. The Multiwell Experiment was undertaken to provide geological characterization, obtain physical property data, and perform stimulation experiments in the Iles and Williams Fork Formations. Three vertical wells and one follow-up slant well were drilled, logged, partially cored, tested for gas production, stimulated in various manners, and tested again. Drawing from published reports and papers, this review paper presents well log, core, and test data from the Multiwell Experiment while emphasizing the geological controls on gas production at the site. Gas production is controlled primarily by a set of regional fractures trending west-northwest. The fractures are vertical, terminating at lithologic boundaries within and at the upper and lower boundaries of sandstone beds. Fractures formed preferentially in sandstones where in situ stress and fracture gradients are lower than in shales and mudstones. The fractures cannot be identified adequately in vertical wellbores; horizontal wells are required. Because present-day maximum horizontal stress is aligned with the regional fractures, artificial fractures induced by pressuring the wellbore form parallel to the regional fractures rather than linking them, with consequent limitations upon enhancement of gas production.

Mountain Geologist↗
USGS1990

Overview of the effects and influence of the activity of Mount St. Helens in the 1980s

The cataclysmic eruption of Mount St. Helens on May 18, 1980, made an enormous impact on the science of volcanology. The eruption was in daylight in clear weather, which provided an unprecedented opportunity to investigate relations among observations, products, and effects of a large explosive eruption. The May 18 events and subsequent activity stimulated perhaps the most intensive studies ever made at an active composite volcano, leading to greatly enhanced insights into both geologic and hydrologic processes operative in explosive volcanism. The eruption also disrupted much of the social and economic fabric of the Pacific Northwest. Volcanologists were called upon to explain the activity, in layman's terms, to government and corporate officials, the news media, schools, and the public at large. People eventually learned to live with the volcano and its uncertainties, and volcanologists better learned their role in helping society deal with a major natural disaster. Difficulties encountered at volcanic crises elsewhere in the world in the 1980s demonstrate that these are hard lessons. In future years, a paramount challenge for scientists will be to help society apply what has been learned at Mount St. Helens to crises both nearby and far away.

Washington↗
USGS2004

Surficial Geologic Map of the Tanacross B-6 Quadrangle, East-Central Alaska

The Tanacross B-6 1:63,360-scale quadrangle, through which the Alaska Highway runs, is in east-central Alaska about 190 km west of the Yukon border. The surficial geologic mapping in the quadrangle is in support of the 'Geologic Mapping in support of land, resources and hazards issues in Alaska' Project of the USGS National Cooperative Geologic Mapping Program. The Tanacross B-6 quadrangle contains parts of three physiographic provinces: the Alaska Range, the Yukon-Tanana Upland, and the Northway-Tanana Lowland. The high, rugged, glaciated landscape of the eastern Alaska Range dominates the southern and western areas of the map area. Within the map area, about a dozen peaks rise to more than 1,710 m. In contrast, the gently rolling hills of the Yukon-Tanana Upland, in the northeastern map area, only rise to about 975 m. Between the Alaska Range and the Yukon-Tanana Upland lies the Northway-Tanana Lowland, which contains the northwesterly flowing Tanana River. Elevations along the floor of the lowland generally range between 390 and 420 m.The map provides interpretations of the Quaternary surficial deposits and associated geologic hazards in this area of the upper Tanana valley. Because the map area is dominated by various surficial deposits, the map depicts 18 different Quaternary surficial units consisting of artificial fill, alluvial, colluvial, organic, eolian, glaciofluvial, glacial, and periglacial deposits. Deposits shown on this map are generally greater than 1 m thick. The map is accompanied by a text containing unit descriptions incorporating information pertaining to material type, location, associated hazards, resource use (if any), and thickness.

Scientific Investigations Map↗
USGS2002

Borehole-geophysical investigation of the University of Connecticut landfill, Storrs, Connecticut

A borehole-geophysical investigation was conducted to help characterize the hydrogeology of the fractured-rock aquifer and the distribution of unconsolidated glacial deposits near the former landfill and chemical waste-disposal pits at the University of Connecticut in Storrs, Connecticut. Eight bedrock boreholes near the landfill and three abandoned domestic wells located nearby were logged using conventional and advanced borehole-geophysical methods from June to October 1999. The conventional geophysical-logging methods included caliper, gamma, fluid temperature, fluid resistivity, and electromagnetic induction. The advanced methods included deviation, optical and acoustic imaging of the borehole wall, heat-pulse flowmeter, and directional radar reflection. Twenty-one shallow piezometers (less than 50-feet deep) were logged with gamma and electromagnetic induction tools to delineate unconsolidated glacial deposits. Five additional shallow bedrock wells were logged with conventional video camera, caliper, electromagnetic induction, and fluid resistivity and temperature tools. The rock type, foliation, and fracturing of the site were characterized from high-resolution optical-televiewer (OTV) images of rocks penetrated by the boreholes. The rocks are interpreted as fine- to medium-grained quartz-feldsparbiotite-garnet gneiss and schist with local intrusions of quartz diorite and pegmatite and minor concentrations of sulfide mineralization similar to rocks described as the Bigelow Brook Formation on regional geologic maps. Layers containing high concentrations of sulfide minerals appear as high electrical conductivity zones on electromagneticinduction and borehole-radar logs. Foliation in the rocks generally strikes to the northeast-southwest and dips to the west, consistent with local outcrop observations. The orientation of foliation and small-scale gneissic layering in the rocks, however, varies locally and with depth in some of the boreholes. In two of the boreholes, the foliation strikes predominantly to the northwest and dips to the northeast. Although small-scale faults and lithologic discontinuities were observed in the OTV data, no large-scale faults were observed that appear on regional geologic maps. Fractures were located and characterized through the use of conventional geophysical, OTV, acoustic-televiewer (ATV), and borehole-radar logs. The orientation of fractures varies considerably across the site; some fractures are parallel to the foliation, whereas others cross-cut the foliation. Many of the transmissive fractures in the bedrock boreholes strike about N170°E and N320°E with dips of less than 45°. Other transmissive fractures strike about N60°E with dips of more than 60°. Most of the transmissive fractures in the domestic wells strike about N60°E and N22°E with dips of more than 45°. The strike of N60°E is parallel to the trend of a thrust fault that appears on regional geologic maps. Vertical flow in the boreholes was measured with the heat-pulse flowmeter under ambient and (or) pumping conditions. Results of ATV, OTV, and conventional logs were used to locate specific zones for flowmeter testing. Ambient downflow was measured in three boreholes, ambient upflow was measured in two other boreholes, and both ambient downflow and upflow were measured in a sixth borehole. The other five bedrock boreholes and domestic wells did not have measurable vertical flow. The highest rate of ambient flow was measured in the background borehole in which upflow and downflow converged and exited the borehole at a fracture zone near a depth of 62 feet. Ambient flow of about 340 gallons per day was measured. In the other five wells, ambient flow of about 20 to 35 gallons per day was measured. Under low-rate pumping (0.25 to 1 gallon per minute), one to six inflow zones were identified in each well. Usually the fractures that are active under ambient conditions contribute to the well under pumping conditions. To prevent ambient vertical flow and the potential for cross-contamination, temporary borehole liners were installed in five of the boreholes. Specific-capacity and open-hole transmissivity values were determined in eight boreholes completed in bedrock. The specific capacity estimated for these boreholes ranges from 0.14 to 1.6 gallons per minute per foot. The values for open-hole transmissivity range over two orders of magnitude and when proportioned to individual fracture transmissivity, range from 23 to 340 feet squared per day. Two boreholes had been drilled to intersect electrically conductive zones identified by previous surface-geophysical investigations. The borehole-geophysical results indicate that the boreholes penetrate electrically conductive structures consistent with the anomalies interpreted from the surface-geophysical data. Borehole MW121R was located to intersect a dipping electrically conductive anomaly at about 60 feet, interpreted from the two-dimensional direct currentresistivity survey conducted on the western side of the landfill. The electromagnetic-conductivity log in the borehole contains a high electrical conductivity anomaly at a depth of 69 feet. The magnitude of this anomaly is nearly 10,000 millisiemens per meter and is coincident with a layer containing sulfide mineralization, rather than fractures. The other borehole, MW105R, was located to intersect another anomaly south of the landfill. This anomaly was interpreted as a north-south striking, westward dipping feature. In the borehole, two south-striking, westward dipping fractures were identified in the ATV, OTV, and radar logs. The specific conductance of the fluid measured near these fractures was as high as 1,250 microsiemens per centimeter. Water-quality samples collected in October 1999 from an isolated zone from 71.5 to 76.5 feet indicated high specific conductance (810 microsiemens per centimeter), high concentrations of iron and cadmium, negative oxidation-reduction potential, and chlorobenzene. Collectively, these parameters indicate that the high specific conductance in the borehole logs for MW105R was caused by landfill leachate. Therefore, the anomaly identified by boreholeand surface-geophysical surveys is interpreted as a conductive lithologic feature and a permeable fracture zone that contains landfill leachate.

Connecticut↗
USGS1975

Hydrocarbon potential, geologic hazards, and the technology, time-frame and infrastructure for exploration and development of the lower Cook Inlet, Alaska; a preliminary assessment

The Lower Cook Inlet Outer Continental Shelf (OCS) contains 5600 km 2 of submerged land in less than 200 m of water 150 to 350 km southwest of Anchorage, Alaska. This area could contain from 0.3 to 1.4 billion barrels of oil and from 0.6 to 2.7 trillion cubic feet of natural gas depending upon the statistical confidence level indicated. The known geology of this submerged area, is extrapolated to the offshore from onshore data. The sedimentary rocks are as old as Triassic and as young as Pleistocene. The Mesozoic strata include volcanic rocks, volcanoclastic and marine clastic sediments. Tertiary, rocks from which the oil and gas in Upper Cook Inlet are produced, consist of nonmarine conglomerate, sandstone, siltstone and coal. The potential objective section for oil and gas in this OCS area ranges from Middle Jurassic through the Tertiary. The present structural configuration of this area is a northeast trending trough filled with Tertiary sediments. The trough is flanked by two major faults, the Bruin Bay fault on the northwest and the Border Ranges fault on the southeast. Between these faults is the OCS area containing anticlinal structures and faults which may be traps for hydrocarbons. Potential geologic hazards are present in this area. It is an area of intense tectonism expressed as seismic activity (earthquakes) and volcanic eruptions which produce many natural disturbances including tsunamis. This distribution of soft sediment and other submarine features which relate to geologic hazards are only generally known.

Alaska↗
USGS1999

Geologic map of Ophir and central Candor Chasmata (MTM -05072) of Mars

The geologic map of Ophir and central Candor Chasmata is one of a series of 1:500,000 scale maps prepared for areas on Mars that are of particular scientific interest and may serve as potential future landing sites. This map is also part of a set that includes east Candor Chasma, west Candor Chasma, and Melas Chasma. The geologic interpretations are based dominantly on medium- and high-resolution Viking images, many of them stereoscopic, and supplemented by lower resolution apoapsis and other color images. A strip of very high resolution stereoscopic images (~20 m/pixel) crosses the central part of the quadrangle from northwest to southeast and served to clarify detailed relations not obvious on other images. A topographic map with contour intervals of 200 m was also used, as were multidirectional oblique images derived from merged image mosaics and topography (see fig. 1) (Bertolini and McEwen, 1990). Geologic relations and interpretations are based on the entire central Valles Marineris map set. The map area is included in the Valles Marineris map of Witbeck and others (1991), but units were defined independently. Age assignments, however, were integrated with those by Witbeck and others and Scott and Tanaka (1986).

IMAP↗
USGS2001

Subsurface correlations and sequence stratigraphic interpretations of lower Silurian strata in the Appalachian Basin of northeast Ohio, southwest New York, and northwest Pennsylvania

Significant quantities of recoverable natural gas resources are estimated to be in the regionally extensive Lower Silurian Medina Group and “Clinton” sandstone of the Appalachian Basin (Gautier and others, 1995; Ryder and others, 1996; Ryder, 1998). In order to assess these accumulations of natural gas more accurately, the U.S. Geological Survey (USGS) has investigated the Silurian stratigraphy along six lines of cross section located in New York, Pennsylvania, Ohio, and West Virginia (fig. 1). Cross section A–A' extends about 375 mi from northeast to southwest and is oriented approximately parallel to the nearby paleoshoreline of the Silurian epeiric sea. The remaining cross sections extend about 100–200 mi from northwest to southeast and are oriented nearly perpendicular to the paleoshoreline. Stratigraphic investigations along A–A' were reported by Ryder (2000), correlations along D–D' were reported by Keighin (1998), and investigations along E–E' and F–F' were in progress at the time of this publication. This report provides correlations for Silurian strata along cross sections B–B' and C–C', which are located in the northern part of the Appalachian Basin (figs. 1 and 2). Cross section B–B' extends about 140 mi from Chautauqua County, N.Y., to Clinton County, Pa., and C–C' extends about 200 mi from Lake County, Ohio, to Clinton County, Pa. Correlations are made along B–B' and C–C' for the Lower Silurian Medina and Clinton Groups, Lower Silurian Tuscarora and Rose Hill Formations, and Lower and Upper Silurian Lockport Group and Mifflintown Formation (lower part). Emphasis is placed on the Medina Group because it is the principal natural gas reservoir in the Silurian deposit.

Ohio, Pennsylvania↗
USGS1972

Photogeology: Part F: reinterpretations of the northern Nectaris Basin

Geologic units of the Nectaris Basin rim have been interpreted as partly impact and partly volcanic in origin (refs. 29-4, 29-21, 29-35, 29-38, and 29-39). An exclusively volcanic origin was proposed for the material in the vicinity of the Apollo 16 landing site, slightly northwest of the Nectaris Basin (ref. 29-36). In view of the dominance of breccia and the paucity of volcanic material in the returned Apollo 16 samples, it now seems appropriate to reevaluate this part of the Moon to test whether the geology of the units mapped to date can be reconciled with an impact origin. Therefore, photogeologic analysis was attempted on a strip of Apollo 16 metric photographs; the superior quality and stereographic properties of the photography permit this reevaluation (fig. 29-32). Geologic contacts, as redrawn, closely resemble those of the earlier maps cited, but some differences result because of improved photographic quality and a conscious attempt to test fully the impact hypothesis.

Book chapter↗
USGS2026

As above, so below? A framework for integrating long-term water quantity trends reveals divergent patterns in groundwater and low streamflow across the United States

Climate, land-use, and disturbance drive long-term global trends in groundwater levels and streamflow. At large scales, these trends are typically considered separately, despite the well-established concept that groundwater and surface water comprise a single resource. Joint trend assessment at national scales is challenging because it requires pairing and aggregating data from spatially disparate streamflow and groundwater monitoring sites for which no established framework exists. Here, we evaluate alternative approaches for integrating groundwater and streamflow data to enable joint trend analysis—a critical step toward understanding how water-budget components respond concurrently and interactively to environmental drivers. Mann–Kendall trends were computed for individual groundwater (annual mean depth) and streamflow (annual low of 7 d averages) sites across the U.S over 21- (2000–2020), 31- (1990–2020), and 41-year (1980–2020) periods. Regional Kendall trends were calculated using five spatially contiguous and noncontiguous regional classifications for aggregation based on subsurface (e.g. aquifer, geology) and surface (e.g. watershed, landscape) characteristics. Site-level results revealed contrasting trends, with tendencies toward increasing low flows (wetting) and increasing groundwater depths (drying). Agreement between streamflow and groundwater trends increased with regional aggregation and longer timeframes, though persistent skew toward streamflow wetting and groundwater drying remained. Results varied by region and trend period, with notable consistencies: unified drying in the West/Southwest and wetting in the Upper Midwest. Directional mismatches in long-term trends were prominent in the High Plains and Mississippi Alluvial Plain, whereas near-term mismatches were most evident in the Northwest. Aggregation by hydrologic landscape regions (HLR) yielded the greatest agreement between groundwater and streamflow trends. These findings indicate that coupled responses may represent combined influences of climate, relief, and geology, as captured by HLR, more strongly than geography or geology alone. Integrated water availability assessments may benefit from a multi-characteristic classification framework to treat groundwater and surface water as a unified resource.

Environmental Research: Water↗
USGS1999

Laramide to Holocene structural development of the northern Colorado Front Range

The Rocky Mountain province of the United States is a classic basement-involved foreland orogen. Deformation during the Late Cretaceous to Eocene Laramide orogeny created an anastomosing system of basement-cored arches that bound the northern and eastern margins of the Colorado Plateau and the elliptical sedimentary basins of the Rockies. The tectonic mechanism for Laramide deformation remains controversial, with proposed mechanisms ranging from subcrustal shear during low-angle subduction (Bird, 1988, 1998; Hamilton, 1988) to detachment of the upper crust during plate collision to the west (Oldow and others, 1990; Erslev, 1993). The Rocky Mountains south of Wyoming have the additional complication of a period of mid-Tertiary igneous activity and sedimentation that coincides with Neogene extension along the Rio Grande rift. This field trip (Fig. 1) will explore the Laramide to Holocene structural development of the southern Rocky Mountains by examining the geologic record exposed in the northern Front Range of Colorado. The Front Range starts north of Canon City, Colorado, and trends north-northwest to Golden, Colorado. North of Golden, the range takes a more northerly trend toward the Wyoming border where it bifurcates into the north-trending Laramie Range (Brewer and others, 1982) and the north-northwest-trending Medicine Bow Range.

Colorado↗
USGS1987

Geologic map of the Chelan 30-minute by 60-minute quadrangle, Washington

Summary -- The Chelan quadrangle hosts a wide variety of rocks and deposits and display a long geologic history ranging from possible Precambrian to Recent. Two major structures, the Leavenworth and Entiat faults divide cross the quadrangle from southeast to northwest and bound the Chiwaukum 'graben', a structural low preserving Tertiary sedimentary rocks between blocks of older, metamorphic and igneous rocks. Pre-Tertiary metamorphic rocks in the quadrangle are subdivided into five major tectonostratigraphic terranes: (1) the Ingalls terrane, equivalent to the Jurassic Ingalls Tectonic Complex of probable mantle and deep oceanic rocks origin, (2) the Nason terrane, composed of the Chiwaukum Schist and related gneiss, (3) the Swakane terrane, made up entirely of the Swakane Biotite Gneiss, a metamorphosed, possibly Precambrian, sedimentary and/or volcanic rock, (4) the Mad River terrane composed mostly of the rocks of the Napeequa River area (Napeequa Schist), a unit of oceanic protolith now considered part of the Chelan Mountains terrane (the Mad River terrane has been abandoned, 2001), and (5) the Chelan Mountains terrane, dominated by the Chelan Complex of Hopson and Mattinson (1971) which is composed of migmatite and gneissic to tonalite of deep-seated igneous and metamorphic origin.During an episode of Late Cretaceous regional metamorphism, all the terranes were intruded by deepseated tonalite to granodiorite plutons, including the Mount Stuart batholith, Ten Peak and Dirty Face plutons, and the Entiat pluton and massive granitoid rocks of the Chelan Complex. The Duncan Hill pluton intruded rocks of the Chelan Mountains terrane in the Middle Eocene. At about the same time fluvial arkosic sediment of the Chumstick Formation was deposited in a depression. The outpouring of basalt lavas to the southeast of the quadrangle during the Miocene built up the Columbia River Basalt Group. These now slightly warped lavas lapped onto the uplifted older rocks. Deformation, uplift, and erosion recorded in the rocks and deposits of the quadrangle continued into post-Miocene time. Quaternary deposits reflect advances of glaciers down the major valleys, a complicated history of catastrophic glacial floods down the Columbia River, the formation of lakes in the Columbia and Wenatchee river valleys by landslides and flood backwaters, and hillslope erosion by large and small landslides and debris flows.

IMAP↗
USGS2000

Publications of the Western Earth Surface Processes Team, 1999

The Western Earth Surfaces Processes Team (WESPT) of the U.S. Geological Survey, Geologic Division (USGS, GD), conducts geologic mapping and related topical earth- science studies in the western United States. This work is focused on areas where modern geologic maps and associated earth-science data are needed to address key societal and environmental issues such as ground-water quality, potential geologic hazards, and land-use decisions. Areas of primary emphasis currently include southern California, the San Francisco Bay region, and the Pacific Northwest. The team has its headquarters in Menlo Park, California, and maintains field offices at several other locations in the western United States. The results of research conducted by the WESPT are released to the public as a variety of databases, maps, text reports, and abstracts, both through the internal publication system of the USGS and in diverse external publications such as scientific journals and books. This report lists publications of the WESPT released in 1999 as well as additional 1997 and 1998 publications that were not included in the previous list (USGS Open-file Report 99-302). Most of the publications listed were authored or coauthored by WESPT staff. The list also includes some publications authored by non-USGS cooperators with the WESPT, as well as some authored by USGS staff outside the WESPT in cooperation with WESPT projects.

Open-File Report↗
USGS2025

Hydrogeology and groundwater quality in the Snake River alluvial aquifer at Jackson Hole Airport, Wyoming, 2011–20

The Snake River alluvial aquifer underlying the Jackson Hole Airport (JHA) in northwest Wyoming is an important source of water used for domestic, commercial, and irrigation purposes by the airport and nearby residents. The U.S. Geological Survey, in response to previously identified water-quality concerns in the area, monitored and evaluated changes in hydrogeologic characteristics and groundwater-quality conditions of the alluvial aquifer during 2011–20. During that period, the Jackson Hole Airport made several changes that potentially improved water quality at and downgradient from the airport. Well, water level, and hydrogeologic data were collected from the alluvial aquifer to identify hydrogeologic characteristic and groundwater quality changes. Additionally, results of statistical tests were applied to water-quality results to evaluate trends in selected physical properties and constituent concentrations with time. The trends of those data show that water quality did improve overall during the study period compared to previously collected data. Presumably, these trends are in response to the changes in the aircraft deicing/anti-icing fluid (ADAF) formulation used by the JHA, the many JHA infrastructure improvements made during 2011–20, the degradation of existing ADAFs in subsurface soils and groundwater, or some combination of these possibilities.

Wyoming↗
USGS2002

Regional structural framework and petroleum assessment of the Brooks Range foothills and southern coastal plain, National Petroleum Reserve, Alaska

New interpretations of the frontal part of the Brooks Range orogen beneath the foothills and coastal plain in the National Petroleum Reserve-Alaska (NPRA) are based on reprocessed regional seismic reflection data, recent geologic field observations, and new apatite fission-track analyses. Three long north-south transects illustrate the configuration of thrust faulting above a basal detachment that, within the southern part of NPRA, steps up from the Triassic Shublik Formation, to the Jurassic Kingak Shale, and finally into Cretaceous Torok mudstones. This thrust system represents the youngest recognized pulse of major shortening, about 60 Ma. The transects, along with other seismic-reflection examples, illustrate four play concepts being used in the deformed area for the 2002 U.S. Geological Survey oil and gas assessment of the National Petroleum Reserve-Alaska (NPRA). The Brookian topset structural play includes broad west-northwest-trending anticlines in the Cretaceous Nanushuk Group, developed above structurally thickened Torok mudstones in the incipiently-deformed, most northerly part of the thrust system. The Torok structural play includes prominent anticlines affecting deep-basin sandstones, many of which are detached from folds exposed at the surface. The Ellesmerian structural play includes closures developed in the clastic part of the Ellesmerian sequence, mainly above a detachment in the Shublik Formation. The thrust belt play includes antiformal stacks of allochthonous Endicott Group clastic rocks and Lisburne Group carbonates; these stacks were assembled at about 120 Ma, and were transported to their present positions in the foothills at about 60 Ma.

Alaska↗
USGS1998

Field trip road log—geology and tectonics of the Gualala block

The Pacific Section, S.E.P.M. 1998 Fall Field Trip will traverse rocks of the Gualala block of northern California. Seven stops (Figure 1) will be made in one and a half days and will examine a variety of geologic features and rock types in this significant area. The field trip is an outgrowth of a symposium held at the 1998 Annual Meeting of the Pacific Section, S.E.P.M. in Ventura, California, where eleven papers were presented. The field trip stops will focus on the effects of the 1906 California earthquake, the nature and significance of the spilite of Black Point, the basement of the region, comparison of different turbidite sequences in the Paleocene/Eocene German Rancho Formation, young tectonics in the northern part of the block, the paleontology and structural significance of the Upper Cretaceous Anchor Bay Member of the Gualala Formation of Wentworth (1966), and the geology of the Miocene Point Arena Formation at Arena Cove. At several stops, the origin of the Gualala block which has traveled progressively northwest as a result of movement along the San Andreas fault system will be discussed.

Book chapter↗
USGS2014

The hydrogeology of the Tully Valley, Onondaga County, New York: an overview of research, 1992-2012

Onondaga Creek begins approximately 15 miles south of Syracuse, New York, and flows north through the Onondaga Indian Nation, then through Syracuse, and finally into Onondaga Lake in central New York. Tully Valley is in the upper part of the Onondaga Creek watershed between U.S. Route 20 and the Valley Heads end moraine near Tully, N.Y. Tully Valley has a history of several unusual hydrogeologic phenomena that affected past land use and the water quality of Onondaga Creek; the phenomena are still present and continue to affect the area today (2014). These phenomena include mud volcanoes or mudboils, landslides, and land-surface subsidence; all are considered to be naturally occurring but may also have been influenced by human activity. The U.S. Geological Survey (USGS), in cooperation with the U.S. Environmental Protection Agency and the Onondaga Lake Partnership, began a study of the Tully Valley mudboils beginning in October 1991 in hopes of understanding (1) what drives mudboil activity in order to remediate mudboil influence on the water quality of Onondaga Creek, and (2) land-surface subsidence issues that have caused a road bridge to collapse, a major pipeline to be rerouted, and threatened nearby homes. Two years into this study, the 1993 Tully Valley landslide occurred just over 1 mile northwest of the mudboils. This earth slump-mud flow was the largest landslide in New York in more than 70 years (Fickies, 1993); this event provided additional insight into the geology and hydrology of the valley. As the study of the Tully Valley mudboils progressed, other unusual hydrogeologic phenomena were found within the Tully Valley and provided the opportunity to perform short-term, small-scale studies, some of which became graduate student theses—Burgmeier (1998), Curran (1999), Morales-Muniz (2000), Baldauf (2003), Epp (2005), Hackett, (2007), Tamulonis (2010), and Sinclair (2013). The unusual geology and hydrology of the Tully Valley, having been investigated for more than two decades, provides the basis for this report.

New York↗
USGS2012

Reducing Vulnerability of Ports and Harbors to Earthquake and Tsunami Hazards

Recent scientific research suggests the Pacific Northwest could experience catastrophic earthquakes in the near future, both from distant and local sources, posing a significant threat to coastal communities. Damage could result from numerous earthquake-related hazards, such as severe ground shaking, soil liquefaction, landslides, land subsidence/uplift, and tsunami inundation. Because of their geographic location, ports and harbors are especially vulnerable to these hazards. Ports and harbors, however, are important components of many coastal communities, supporting numerous activities critical to the local and regional economy and possibly serving as vital post-event, response-recovery transportation links. A collaborative, multi-year initiative is underway to increase the resiliency of Pacific Northwest ports and harbors to earthquake and tsunami hazards, involving Oregon Sea Grant (OSG), Washington Sea Grant (WSG), the National Oceanic and Atmospheric Administration Coastal Services Center (CSC), and the U.S. Geological Survey Center for Science Policy (CSP). Specific products of this research, planning, and outreach initiative include a regional stakeholder issues and needs assessment, a community-based mitigation planning process, a Geographic Information System (GIS) — based vulnerability assessment methodology, an educational web-site and a regional data archive. This paper summarizes these efforts, including results of two pilot port-harbor community projects, one in Yaquina Bay, Oregon and the other in Sinclair Inlet, Washington. Finally, plans are outlined for outreach to other port and harbor communities in the Pacific Northwest and beyond, using "getting started" workshops and a web-based tutorial.

Oregon, Washington↗