SEARCH · Search USGS

Results for “Industrial Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources

USGS1954

The industrial utility of public water supplies in the United States, 1952, part 1, States east of the Mississippi River

Public water supplies are utilized extensively by industries for processing, cooling, and steam generation. The requirements as to quality of water for each industry are specific, therefore information on the quality or chemical character of the water supply is essential not only in the location of industrial plants but also is an aid in the manufacture and distribution of products. Data are given in this report on the water supplies for 1,315 of the larger cities (or places) throughout the United States. The population of these cities represents 58. 3 percent of the total population (1950 census), and more than 90 percent of the total urban population, of the United States. Part 1 of the report contains data for 819 cities east of the Mississippi River, and part 2 includes data for 416 cities west of the river. All cities of 15,000 or more population and many cities of smaller population are included. The information given for each place includes, in most instances, population of the place; ownership, source, and treatment of supply; storage facilities for both raw and finished water; and chemical analyses of the supplies. The chemical quality of a water affects its industrial utility. A total of 2, 506 chemical analyses of the supplies for the places included are shown. Surface-water supplies, generally, are more variable in composition than ground-water supplies, but contain less mineral matter in solution. Many of the treated public supplies require further treatment to make them satisfactory for some industrial uses. Of the total of 1,315 places included in the report, 711 receive surface-water supplies; 472 receive ground-water supplies, and 132 receive mixed supplies. The population served by these supplies is about 88,000,000, of which about 71,000,000 receive surface-water supplies and 17,000,000 groundwater supplies. Hardness of water supplies with respect to industrial use is given much attention. The hardness of the large public supplies ranges from less than 5 parts per million to about 700 parts. About 52, 000, 000 people are furnished with water having hardness of 100 parts per million or less. The weighted average hardness (average hardness of supplies weighted according to the population served) of finished water of surface supplies is 82 parts per million; of ground supplies, 162 parts; and of all supplies, 97 parts. The weighted average hardness of raw water of surface, ground, and all supplies are 96,200, and 116 parts per million, respectively. The average hardness (based on the average hardness of each supply and the number of supplies) of finished water of surface supplies is 85 parts per million; of ground supplies, 164 parts; and of all supplies, 121 parts. The average hardness of the raw water supplies are 94, 192 and 139 parts per million, respectively. The median hardness of finished water of all supplies is 91 parts per million, and of the raw water supplies, 90 parts. The treatment of a public water supply is planned principally to give a water that is bacterially safe for public use, and to eliminate or minimize certain undesirable characteristics of the water; Of the supplies for the places in this report, a total of 117 (3 surface supplies and 114 ground supplies) receive no treatment; 393 supplies receive no treatment other than chlorination; and the remainder receive treatment in addition to chlorination. The supplies for 171 cities are softened. Rapid sand filter plants are in use for 533 cities, exclusive of those in use at places where the water is softened. Slow sand-filter plants are in use at 35 places. A population of about 40, 000, 000 is served with water from these filter plants. The total number of treatment plants, exclusive of facilities for chlorination, for most of the places in this report is 660. The total capacity of these plants in millions of gallons per day is 10, 694. A total of 693 places report raw-water storage facilities having a total capacity of 2, 460, 346 millions of gallons; a total of 1,081 places report finished-water storage facilities having a total capacity of 24, 557 millions of gallons. Investigations by others have shown that a definite relationship exists between fluoride in drinking water and the incidence of dental caries in the teeth of children. A total of about 85 percent of the population served from the large public supplies receive water having a fluoride concentration in the range of 0.0 to 0. 5 part per million. Few large public supplies contain fluoride in concentrations in excess of 3 parts per million. A total of 155 places of those included in the report received fluoridated water in 1955.

Water Supply Paper↗

USGS2022

Mapping first to final uses for rare earth elements, globally and in the United States

Estimating the material flows of rare earth elements (REEs) is essential to understanding which industries are most vulnerable to potential REE supply disruptions which, in turn, may inform policy recommendations aimed at reducing the supply risk. However, the REEs are a group of mineral commodities characterized by highly uncertain estimates of supply and demand due to the REE market's complexity, opacity, and small size. In this study, a streamlined methodology was applied to map mineral commodity first-use to final-use applications and to estimate total requirements at the national level based on available industrial data for final-use finished goods. This analysis examines REEs both as a group and individually, showing that total US requirements are between 15% and 16.5% of world requirements for the year 2015, the latest year with the most complete information available. The findings shed light on US industrial capabilities by revealing the discrepancy between the types of REEs that go into US raw material consumption and those that are contained in embedded consumption. For instance, given the United States’ large oil refining industry, US raw material consumption of lanthanum is quite high. In contrast, US raw material consumption of neodymium is relatively low, whereas embedded demand is comparatively high. This reflects the lack of industrial capacity to process REE concentrates into magnet material combined with the US's high imports of products that contain rare earth permanent magnets.

Journal of Industrial Ecology↗

USGS2013

The role of airborne mineral dusts in human disease

Exposure to fine particulate matter (PM) is generally acknowledged to increase risk for human morbidity and mortality. However, particulate matter (PM) research has generally examined anthropogenic (industry and combustion by-products) sources with few studies considering contributions from geogenic PM (produced from the Earth by natural processes, e.g., volcanic ash, windborne ash from wildfires, and mineral dusts) or geoanthropogenic PM (produced from natural sources by processes that are modified or enhanced by human activities, e.g., dusts from lakebeds dried by human removal of water, dusts produced from areas that have undergone desertification as a result of human practices). Globally, public health concerns are mounting, related to potential increases in dust emission from climate related changes such as desertification and the associated long range as well as local health effects. Recent epidemiological studies have identified associations between far-traveled dusts from primary sources and increased morbidity and mortality in Europe and Asia. This paper provides an outline of public health research and history as it relates to naturally occurring inorganic mineral dusts. We summarize results of current public health research and describe some of the many challenges related to understanding health effects from exposures to dust aerosols.

Aeolian Research↗

USGS1989

Airborne imaging spectrometer data of the Ruby Mountains, Montana: Mineral discrimination using relative absorption band-depth images

Airborne imaging spectrometer data collected in the near-infrared (1.2–2.4 μm) wavelength range were used to study the spectral expression of metamorphic minerals and rocks in the Ruby Mountains of southwestern Montana. The data were analyzed by using a new data enhancement procedure—the construction of relative absorption band-depth (RBD) images. RBD images, like bandratio images, are designed to detect diagnostic mineral absorption features, while minimizing reflectance variations related to topographic slope and albedo differences. To produce an RBD image, several data channels near an absorption band shoulder are summed and then divided by the sum of several channels located near the band minimum. RBD images are both highly specific and sensitive to the presence of particular mineral absorption features. Further, the technique does not distort or subdue spectral features as sometimes occurs when using other data normalization methods. By using RBD images, a number of rock and soil units were distinguished in the Ruby Mountains including weathered quartz - feldspar pegmatites, marbles of several compositions, and soils developed over poorly exposed mica schists. The RBD technique is especially well suited for detecting weak near-infrared spectral features produced by soils, which may permit improved mapping of subtle lithologic and structural details in semiarid terrains. The observation of soils rich in talc, an important industrial commodity in the study area, also indicates that RBD images may be useful for mineral exploration.

Montana↗

USGS2016

Beryllium—A critical mineral commodity—Resources, production, and supply chain

Beryllium is a lightweight metallic element used in a wide variety of specialty and industrial applications. As a function of its unique chemical and physical properties, such as a high stiffness-to-weight ratio, resistance to temperature extremes, and high thermal conductivity, beryllium cannot be easily replaced by substitute materials in applications where combinations of these properties make it the material of choice. Because the number of beryllium producers is limited and the use of substitute materials in specific defense-related applications that are vital to national security is inadequate, several studies have categorized beryllium as a critical and strategic material. This categorization has led to the United States Government recommending that beryllium be stockpiled for use in the event of a national emergency. As of December 31, 2015, the National Defense Stockpile inventory of hot-pressed beryllium metal powder, structured beryllium metal powder, and vacuum-cast beryllium metal totaled 78 metric tons (t). The U.S. Geological Survey (USGS) Mineral Resources Program supports research on the occurrence, quality, quantity, and availability of mineral resources vital to the economy and national security. The USGS, through its National Minerals Information Center (NMIC), collects, analyzes, and disseminates information on more than 90 nonfuel mineral commodities from more than 180 countries. This fact sheet provides information on the production, consumption, supply chain, geology, and resource availability of beryllium in a global context.

Fact Sheet↗

USGS2015

Porphyry copper assessment of northeast Asia: Far East Russia and northeasternmost China: Chapter W in Global mineral resource assessment

The U.S. Geological Survey assesses resources (mineral, energy, water, environmental, and biologic) at regional, national, and global scales to provide science in support of land management and decision making. Mineral resource assessments provide a synthesis of available information about where mineral deposits are known and suspected to be in the Earth’s crust, which commodities may be present, and estimates of amounts of resources in undiscovered deposits. A probabilistic mineral resource assessment of undiscovered resources associated with porphyry copper deposits in northeast Asia—composed mainly of Far East Russia and a small part of northeasternmost China—was completed as part of a global mineral resource assessment. Porphyry copper deposits are the main source of copper globally. Russia is an important source of copper, consistently ranking as 6th, 7th, or 8th in world production since 2000, and ranked 7th in 2014. Most of this production has been from magmatic copper-nickel-platinum-group element, volcanogenic massive sulfide, and sediment-hosted copper deposit types. The purpose of the assessment was to (1) compile a database of known deposits and significant prospects, (2) delineate permissive areas (tracts) for undiscovered porphyry copper deposits that may be present in the upper kilometer of the Earth’s crust, and (3) provide probabilistic estimates of amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in undiscovered porphyry copper deposits in the tracts. The assessment was completed by the U.S. Geological Survey in collaboration with geologists from the Russian Academy of Sciences and industry consultants. The database of known deposits, significant prospects, and prospects includes an inventory of mineral resources in two known porphyry copper deposits, as well as key characteristics derived from available exploration reports for 70 significant porphyry copper prospects and 86 other prospects. Resource and exploration and development activity are updated with information current through February 2013.

Scientific Investigations Report↗

USGS2002

Tabulation of asbestos-related terminology

The term asbestos has been defined in numerous publications including many State and Federal regulations. The definition of asbestos often varies depending on the source or publication in which it is used. Differences in definitions also exist for the asbestos-related terms acicular, asbestiform, cleavage, cleavage fragment, fiber, fibril, fibrous, and parting. An inexperienced reader of the asbestos literature would have difficulty understanding these differences and grasping many of the subtleties that exist in the literature and regulatory language. Disagreement among workers from the industrial, medical, mineralogical, and regulatory communities regarding these definitions has fueled debate as to their applicability to various morphological structures and chemical compositions that exist in the amphibole and serpentine groups of minerals. This debate has significant public health, economic and legal implications. This report summarizes asbestos-related definitions taken from a variety of academic, industrial, and regulatory sources. This summary is by no means complete but includes the majority of significant definitions currently applied in the discipline.

Open-File Report↗

USGS1951

Ground water in the Mohall area, Bottineau and Renville Counties, North Dakota

The Mohall area includes about 120 square miles in Bottineau and Renville Counties in northwestern North Dakota. Mohall, whose 1950 population was 1,073, is the only town in the area. The area is part of the Drift Prairie section of the Central Lowland physiographic province. It is characterized by the gently undulating ground moraine plain which slopes regionally to the northeast. It is drained by several southeast-trending intermittent streams which run almost at right angles to the regional slope. The geologic formations in the Mohall area may be conveniently grouped into three units: the alluvium or alluvial deposits, which are found in the valleys of the intermittent streams, the till and associated glaciofluvial deposits, and the bedrock formations. Ground water of reasonably good quality is obtained in the area only from the alluvial deposits. Because of the limited areal extent of these deposits, only a small number of farms obtain water supplies from them. However, the municipal water supply of the town of Mohall is obtained from these deposits in Spring Coulee northeast of the town, and much water for rural domestic use is hauled from the Becker well southwest of the town, in Little Deep Creek. The principal source of recharge to the alluvial deposits is seepage during the spring runoff period. Natural discharge occurs by underflow down the stream valleys, by evaporation from open water and marshy areas and transpiration by plants. The coefficient of transmissibility of the alluvium, n the basis of short pumping tests on Mohan wells 3 and 4, is indicated to be about 6,000 gallons a day per foot at well 3 and about 20,000 gallons a day per foot at well 4. The specific yield was computed as 0.25 from the pumping test on well 3. No gravel of importance was en countered in the two cross sections that were drilled across Spring Coulee near the municipal wells, and the greatest thickness of satu rated alluvial deposits found was only about 10 feet. A Saturated thickness of 20 feet of sand and gravel was penetrated in test drilling along Cut Bank Creek. This is the greatest thickness of saturated alluvial deposits penetrated anywhere in the area. Ground water in storage in these alluvial deposits has been estimated to be about 150 million gallons per mile. These deposits are favorably situated to receive recharge, as Cut Bank Creek drains a rather large area and contains long stretches of open water perennially, Therefore, it is believed that the alluvial deposits of Cut Bank Creek offer the best promise for the development of moderately large perennial ground-water supplies for the present and probable future needs of the town of Mohall. Test drilling in West Cut Bank Creek and in Little Deep Creek did not reveal alluvial deposits of such character and saturated thickness as to be considered favorable for the development of moderate to large water supplies, though some of the material encountered should yield adequate quantities for farm supplies. The till with its associated glaciofluvial deposits is the surface formation in the area except where covered by the alluvial deposits in the stream valleys. In the Mohall areas, this formation is not an important aquifer and fewer than half a dozen wells are known to obtain water from it. The glaciofluvial deposits penetrated by the test holes are not considered adequate sources for permanent municipal or industrial supplies because they are likely to have small-areal extent and the overlying, relatively impermeable till makes seasonal recharge to them practically impossible. Test drilling in the Souris River Valley about 12 miles west of Mohall penetrated as mutt as 58 feet of fluvial sediments, but practi-cally all the material is clay and silt. No important aquifers were found there. At least 50 percent of all the farm water supplies in the area are obtained from wells in the bedrock formations, which probably consist of the Fox Hills sandstone, the Cannonball formation, and the Ludlow and Tongue Rtter members of the Fort Union formation. Underlying these formations is approximately 2,600 feet of Cretaceous shale, which'is not water bearing. Water from the "Dakota" sandstone (including the possible equivalent of the Fuson shale and Lakota sandstone) may be obtained at depths of about 3,200 to 3,300 feet. The "Dakota sandstone" probably would yield water in sufficient quantity for municipal and many industrial purposes in this areas but the water is likely to be too highly mineralized for most domestic uses. Jurassic formations underlie the Cretaceous formations in the area. They do not constitute aquifers of importance, and, any water found in them is likely to be too highly mineralized for most purposes. In the Mohall area, by far the most suitable water for general purposes is obtained from the shallow alluvial deposits in the stream valleys. Of the seven samples of this water water analyzed, the highest concentration of dissolved solids was 1,242 parts per million and the lowest, 317 parts. The iron content was higher than desirable in two samples but satisfactory in all the others. Total hardness ranged from 196 to 570, which is higher than desirable. Nitrate was present in all samples analyzed and was excessively high in two samples. Water samples for analysis were not obtained from the till and associated glaciofluvial deposits but the water from these aquifers is likely to be more highly mineralized than the water from the alluvial. deposits. The water from the upper part of the bedrock is highly mineralized, but its mineral content varies considerably. The chloride concentration of the samples analyzed ranges from 608 to 3,740 parts per million and the bicarbonate concentration ranges from 160 to 860 parts per million. The specific conductance ranges from 3,190 to 11,120 micromhos and may represent total mineralization on the order of 1,500 to more than 6,000 parts per million in the water with high chloride and bicarbonate content.

North Dakota↗

USGS2006

State summaries: Illinois

According to the United States Geological Survey (USGS), Illinois ranked third in the amount of crushed stone produced from underground mining operations. In 2004, Illinois produced more than 76.5 Mt of crushed stone and 38.7 Mt of sand-and-gravel. Preliminary data for 2005 showed an increase in the production of crushed stone and a slight decrease in the production of sand-and-gravel. The state remained 16th in total value of nonfuel mineral production. In decreasing order of value, the minerals produced included crushed stone, cement, construction sand and gravel, lime, clay, peat, tripoli, industrial sand, crushed sandstone and gemstone.

Mining Engineering↗

USGS2005

Mineral of the month: aggregates

Natural aggregates, consisting of crushed stone, and sand and gravel, are a major contributor to economic health, and have an amazing variety of uses. Aggregates are among the most abundant mineral resources and are major basic raw materials used by construction, agriculture and other industries that employ complex chemical and metallurgical processes.

Geotimes↗

USGS1967

Reconnaissance of the chemical quality of surface waters of the Neches River basin, Texas

The kinds and quantities of minerals dissolved in the surface water of the Neches River basin result from such environmental factors as geology, streamflow patterns and characteristics, and industrial influences. As a result of high rainfall in the basin, much of the readily soluble material has been leached from the surface rocks and soils. Consequently, the water in the streams is usually low in concentrations of dissolved minerals and meets the U.S. Public Health Service drinking-water standards. In most streams the concentration of dissolved solids is less than 250 ppm (parts per million). The Neches River drains an area of about 10,000 square miles in eastern Texas. From its source in southeast Van Zandt County the river flows in a general southeasterly direction and empties into Sabine Lake, an arm of the Gulf of Mexico. In the basin the climate ranges from moist subhumid to humid, and the average annual rainfall ranges from 46 inches is the northwest to more than 52 inches in the southeast. Annual runoff from the basin has averaged 11 inches; however, runoff rates vary widely from year to year. The yearly mean discharge of the Neches River at Evadale has ranged from 994 to 12,720 cubic feet per second. The rocks exposed in the Neches River basin are of the Quaternary and Tertiary Systems and range in age from Eocene to Recent. Throughout most of the basin the geologic formations dip generally south and southeast toward the gulf coast. The rate of dip is greater than that of the land surface; and as a result, the older formations crop out to the north of the younger formations. Water from the outcrop areas of the Wilcox Group and from the older formations of the Claiborne Group generally has dissolved-solids concentrations ranging from 100 to 250 ppm; water from the younger formations has concentrations less than 100 ppm. The northern half of the basin has soft water, with less than 60 ppm hardness. The southern half of .the basin has very soft water, usually with less than 30 ppm hardness. The chloride concentrations are less than 20 ppm in surface water in the southern half of the basin and usually range from 20 to 100 ppm in the northern half of the basin. Concentrations greater than 100 ppm are found only where pollution is occurring. The Neches River basin has an abundance of surface water, but uneven distribution of runoff makes storage projects necessary to provide dependable water supplies. The principal existing reservoirs, with the exception of Striker Creek Reservoir, contain water of excellent quality. Chemical-quality data for the Striker Creek drainage area indicate that its streams are affected by .the disposal of brines associated with oil production. Sam Rayburn Reservoir began impounding water in 1965. The water impounded should prove of acceptable quality for most uses, but municipal and industrial wastes released into the Angelina River near Lufkin may have a degrading effect on the quality of the water, especially during extended periods of low flows. Water available for storage at the many potential reservoir sites will be of good quality; but, if the proposed salt-water barrier is to impound acceptable water, the disposal of oilfield brine into Pine Island Bayou should be discontinued.

Water Supply Paper↗

USGS1978

The role of the U.S. Geological Survey in the lithium industry

The U.S. Geological Survey has responsibility in the U.S. Department of the Interior to assess the nation's energy and mineral resources. The evaluation of reserves and resources of a commodity such as lithium should be a continuing process in the light of advancing technology and ever-growing knowledge of its geologic occurrence and geochemical behavior. Although reserves of lithium vary with market demand because of the investment required to find, develop, and appraise an ore body, total resources are a function of the geologic occurrence and geochemical behavior of lithium. By studying known deposits and publishing data on their origin and occurrence, the U.S. Geological Survey can aid in the discovery of new deposits and improve the resource base. Resource data are used both by the government and the private sector. Government funding for research on energy-related technologies such as electric vehicle batteries and fusion power requires assurance that there will be enough lithium available in time for commercialization. Questions of availability for all mineral commodities must be answered by the U.S. Geological Survey so that intelligent decisions can be made.

Energy↗

USGS2007

Mineral resource of the month: wollastonite

When asked about wollastonite, most people respond “wollasta-what?” That’s because the wollastonite industry in the United States is relatively small and not highly publicized. Furthermore, the general public does not have any direct contact with wollastonite despite its use in many consumer products, ranging from car brakes to paint.

Geotimes↗

USGS2016

Geology and undiscovered resource assessment of the potash-bearing Central Asia Salt Basin, Turkmenistan, Uzbekistan, Tajikistan, and Afghanistan: Chapter AA in Global mineral resource assessment

Undiscovered potash resources in the Central Asia Salt Basin (CASB) of Turkmenistan, Uzbekistan, Tajikistan, and Afghanistan were assessed as part of a global mineral resource assessment led by the U.S. Geological Survey. The term “potash” refers to potassium-bearing, water-soluble salts derived from evaporite basins, where seawater dried up and precipitated various salt compounds; the word for the element “potassium” is derived from potash. Potash is produced worldwide at amounts exceeding 30 million metric tons per year, mostly for use in fertilizers. The term “potash” is used by industry to refer to potassium chloride, as well as potassium in sulfate, nitrate, and oxide forms. For the purposes of this assessment, the term “potash” refers to potassium ores and minerals and potash ore grades. Resource and production values are usually expressed by industry in terms of K 2 O (potassium oxide) or muriate of potash (KCl, potassium chloride). The CASB hosts significant discovered potash resources and originated in an inland sea during Late Jurassic time. Seawater flowed into the CASB, mostly from its extreme northwestern margin near the modern Caspian Sea, during several evaporation episodes that deposited at least five different packages of evaporites, with virtually all potash in the second and fourth packages. In this study, the CASB was subdivided into three tracts (permissive areas) for evaluation: the Amu Darya tract in the west, the Gissar tract in the center, and the Afghan-Tajik tract in the east. The Gissar and Amu Darya tracts were quantitatively assessed, whereas the Afghan‑Tajik tract was only qualitatively assessed because of the commonly extreme depth (as deep as 7 km) of the Jurassic salt, extensive deformation, and a lack of known potash deposits. Two approaches were used to estimate amounts of undiscovered potash in the CASB. Stratabound evaporite deposits in the Amu Darya tract were evaluated using an Adaptive Geometric Estimation (AGE) approach, which estimates in-place potash volumes and tonnages. The Gissar tract was evaluated by using the AGE approach for stratabound deposits and the three-part form of assessment of Singer and Menzie (2005) for discrete halokinetic deposits. In the three-part form of assessment, numbers of undiscovered deposits were estimated and combined with grade and tonnage models to probabilistically forecast the amount of undiscovered potash. The Amu Darya tract is estimated to contain 38 billion metric tons of undiscovered potash as K 2 O by using the AGE approach for stratabound deposits. The hybrid stratabound-halokinetic Gissar tract is estimated to contain between 1 and 16 billion metric tons of undiscovered potash as K 2 O. Chapter 1 of this report provides an overview of the history of the CASB and summarizes evaporite potash deposition, halokinesis, and dissolution processes that have affected the current distribution of potash-bearing salt in the CASB. Chapter 2 describes the Gissar tract, an uplifted region that contains a mix of stratabound and halokinetic potash deposits and all of the discovered and exploited potash deposits of the CASB. Chapter 3 describes the Amu Darya tract, where evaporite deposits remain flat-lying and undeformed since their original deposition. Chapter 4 describes the highly deformed and compressed Afghan-Tajik tract and what is known of the deeply-buried Jurassic salt. Chapter 5 describes the spatial databases included with this report, which contain a collection of CASB potash information. Appendixes A and B summarize descriptive models for stratabound and halokinetic potash-bearing salt deposits, respectively. Appendix C summarizes the AGE method used to evaluate the Gissar and Amu Darya tracts. Appendixes D and E contain grade and thickness data for the Gissar and Amu Darya tracts. Appendix F provides the SYSTAT script used to estimate undiscovered K2 O in a CASB tract. Appendix G provides a potash glossary, and appendix H provides biographies of assessment participants.

Scientific Investigations Report↗

USGS2025

Airborne geophysical efforts for critical mineral systems mapping in the southern Midcontinent, USA

The increasing global demand for critical minerals to support energy and technological advancement has accelerated exploration and research efforts for these essential resources. Since 2019, the United States Geological Survey (USGS) Earth Mapping Resources Initiative (EMRI) has worked to modernize geologic mapping of the Nation to better understand its critical mineral resources. To further this initiative, the USGS has flown a series of high-resolution airborne magnetic and radiometric surveys over large areas of the southern Midcontinent. The surveys cover known critical mineral deposits and areas with the potential to host additional critical minerals based on the presence of one or more overlapping mineral systems. One aspect of EMRI emphasizes close collaboration between the USGS and the Association of American State Geologists, as well as other government and industry partners to leverage geophysical, geological, and geochemical expertise on both regional and local scales. The EMRI high-resolution airborne survey data provide new insights into the geophysical framework of the southern Midcontinent and its critical mineral endowment. Additionally, discoveries made from the data have directed new studies for critical mineral exploration.

southern Midcontinent↗

USGS1965

Barite in the United States, exclusive of Alaska and Hawaii

The mineral barite, barium sulfate, is the chief source of barium and its compounds needed for many industrial processes and products. Barite is found the world over and is abundant and widely distributed throughout the United States. The barite deposits of the United States (exclusive of Alaska and Hawaii) are shown on the accompanying map. The principal geologic type of deposit is indicated by the shape of symbol and the relative importance of the deposit is indicated by the size of symbol. This text lists localities by State, and index numbers are keyed to the map. Localities are distinguished by name of mine, prospect, or geographic area; their coordinates are given to the nearest minute of latitude and longitude. Geologic relations of each occurrence, if known, are summarized briefly. The text and map were compiled from published and unpublished information, and at least one reference is given for each locality, if reports have been published. The listings in some States are preceded by a principal reference which is a major source of information about deposits in those States.

Mineral Investigations Resource Map↗

USGS2015

Shift in Global Tantalum Mine Production, 2000–2014

Introduction Tantalum has a unique set of properties that make it useful in a number of diverse applications. The ability of the metal to store and release electrical energy makes it ideally suited for use in certain types of capacitors that are widely used in modern electronics. Approximately 60 percent of global tantalum consumption is in the electronics industry. The ductility and corrosion resistance of the metal lends itself to application in the chemical processing industry, and its high melting point and high strength retention at elevated temperatures make it an important component of super alloys used in aircraft engines. As a major industrialized nation, the United States is a leading consumer of tantalum and tantalum-containing products. Domestic deposits typically are of low grade, and no tantalum has been recovered from mining activities in the United States since 1959. Consequently, the United States is nearly completely reliant on imports to meet its domestic consumption of tantalum for economic and national security needs. The recovery of tantalum from mine production is economically viable in only a few countries. Although developed countries dominated tantalum mine production in the early 2000s, production today is dominated by countries in the Great Lakes Region of Africa. There is concern that the sales of minerals, including columbite-tantalite or “coltan,” a mineral from which tantalum is derived, have helped finance rebel groups accused of violating human rights as part of the continuing armed conflict in the Democratic Republic of the Congo (DRC) and neighboring countries. These accusations have prompted the passage of legislation in the United States to curb the procurement of these mineral commodities, referred to as “conflict minerals,” from the DRC. Specifically, section 1502 of the 2010 Dodd-Frank Wall Street Reform and Consumer Protection Act (Public Law 111–203, 124 Stat. 2213–2218) requires companies that source tantalum, tin, tungsten, and gold (3TG) to perform due diligence on their supply chains to determine if the materials they use originate from the DRC or adjoining countries (defined as sharing a border with the DRC). The DRC, Rwanda, and surrounding countries are not globally significant sources of tin, tungsten, or gold, accounting for only about 2 percent of the mined world supply for each of these elements. The region has, however, evolved to become the world’s largest producer of mined tantalum. A further complication of the production of tantalum stems from the opacity of the tantalum market. Unlike most base and precious metals, tantalum concentrates are not publicly traded through commodities exchanges but are bought and sold through networks of dealers and on contract between producers and consumers, some of whom may not provide accurate statistical data concerning the amounts, origins, and destination of the concentrates. Some price data can be found in trade journals or in other publications; however, there are no recognized official set exchange prices for either concentrate or tantalum metal. Because price is determined by negotiation between buyer and seller, published prices for concentrate are probably not representative of global prices paid for concentrate. The development of a mine-to-market supply-chain analysis is complicated and difficult because many of the industry participants that produce, trade, and consume tantalum do not publish statistical information, contracts are long term between miners and buyers, and much of the industry is vertically integrated. As a result of these and other considerations, tantalum is considered by many to be a “critical” commodity. This fact sheet identifies and addresses the major geographic shifts in the source of mine production of tantalum which have occurred over the past 15 years, some of the factors that drove this shift, and some of the related consequences. One of the activities of the U.S. Geological Survey National Minerals Information Center (USGS-NMIC) is to analyze global supply chains and characterize major components of mineral and material flows from ore extraction through processing to first tier products. These analyses support the core mission of the USGS-NMIC as the Federal entity responsible for the collection, analysis, and dissemination of objective, unbiased, factual information on minerals essential to the U.S. economy and national security.

Fact Sheet↗

USGS1978

Tin and related elements in sediments and beach sands from Afghanistan, Iran, and Turkey

Sixty samples of sediments from stream beds, outwash plains, and beaches were collected in Afghanistan, Iran, and Turkey by Fred L. Klinger, U.S. Bureau of Mines, as part of the field work undertaken by the National Geographic-Smithsonian Pyrotechnological Expedition of 1968. Facilities for the analysis of the samples for tin and other metals were not immediately available, but in 1973 arrangements were made for analyses to be made on a time-permitting basis in the U.S. Geological Survey. The original purpose in collecting the samples was to determine whether tin was present in amounts indicative of sources for tin ores used in antiquity for the manufacture of bronze. The results of the analyses not only permitted an evaluation of the potential for tin in the localities sampled, but also afforded chemical and mineralogical data that were interpretable in the context of regional potential for other elements of current industrial use. These include gold, base metals, ferro-alloy metals, beryllium, rare earths, and barium. The original 60 samples of sand were sieved to make three size fraction (>0.707 mm, <O.707->O.177 mm, and <0.177 mm) for spectrographic and chemical analysis. Splits of these fractions were used for replicate analyses to permit evaluation of the precision of the analytical procedures. Further splitting of the <0.707->0.177 mm sand gave fractions from each sample that were separated in bromoform. Concentrates from the heavy-liquid separations were divided magnetically into six parts from most magnetic to least magnetic. These concentrates were analyzed spectrographically. The precision of the spectrographic analyses is well within the limits of precision expected from semiquantitative procedures. Such precision allows semiquantitative spectrographic procedures to be used with confidence as a valuable tool for reconnaissance investigations in which multi-element analyses are necessary. The analyses of the various fractions of sediments and sediment concentrates indicate the sample media in which an element was most likely to occur. Tin exhibited no preferential concentration into any particular medium. However, many elements with which tin is associated, and other elements of industrial use, do concentrate into one or more of the sample media. This indication of a preferred medium permits interpretation of the analyses as to the best sample medium for a particular element in the environment of western Asia. Cassiterite and/or tin were detected in many samples from Afghanistan, Iran, and Turkey, but in most of the samples the tin was present in normal crustal abundance. Sixteen samples, including seven from Afghanistan, eight from Iran, and one from Turkey contain unusually large amounts of tin. The most notable areas of anomalous tin are near Mirzaka, Qala-i-Asad, and Shah Agha in Afghanistan; near Meshed, Shir Kuh, Natanz, Nodus, and Talmesi in Iran; and on the shore of the Balck Sea just west of Trabzon in Turkey. Even in these localities the tin appears to be a minor element associated with other ores. The most common association of tin is with copper at known mineralized areas. This relation may have historical significance in the context of the development of bronze. The results of the analyses provided geochemical data on the distribution of other elements of industrial use and clearly identified nine of the ten known mineral deposits represented by the samples. The known metallization at the reported deposits may be only a part of more complex groups of metals. In Afghanistan an array of anomalous elements at the known gold placers around Mirzaka and along the Anguri River signals the presence of complex ore deposits. These elements are silver, arsenic, gold, bismuth, cadmium, copper, mercury, indium, molybdenum, lead, antimony, tin, thallium, tungsten, and zinc. They may indicate a Carlin-type gold deposit in which the wall-rocks are enriched in micron-sized particles of gold. Other localities in Afghanistan signalled by the results of the analyses to be anomalous and to merit further geochemical exploration are: (1) a reach of the Panjshir River for beryllium, lead, zinc, chromium and nickel; (2) the area near Bamian for beryllium; (3) the Siakhak village area for gold and copper; (4) around Qala-i-Asad and Shah Agha for lead, zinc, gold, and tungsten. Some attention to the distribution of monazite around Siakhak, Shahjui, Qala-i-Asad, and Shah Agha is justified to determine if this ore mineral for the rare earths and thorium is enriched over its normally expectable trace as an accessory mineral in granitic rocks, pelitic schists, and gneisses. In Iran, the pluton of granodiorite porphyry near Sar Cheshmeh, an area where a huge porphyry copper deposit was being investigated by the Geological Survey of Iran when the present samples were collected in 1968, shows as a strong geochemical anomaly for copper and molybdenum. The granitic area near Meshed is geochemically enriched persistently in beryllium, tin, and barium, and locally in gold, lanthanum, niobium, yttrium, and other elements. This area deserves a thorough regional geochemical survey for beryl and nonberyl sources of beryllium, for fluorite, and for the ores of niobium, tin, barium, the rare earths, and thorium. Other localities in Iran that merit geochemical exploration on the basis of these data are: ;1) the areas between Tabas and Deyhuk, east of Naiband, and south of Naiband for barium and zinc; (2) a locality about midway between Kerman and Sirdjan for barium, lanthanum, strontium, and zinc; (4) the Meskani copper mine area for mercury, lead, and nickel as well as copper; (5) the Talmesi copper mine area for such other elements as barium, cobalt, mercury, strontium, and zinc; (6) a small pluton of granodiorite north of Natanz for tungsten and base metals; (7) the vicinity of Zendjan for auriferous polymetallic sufide deposits; (8) gold in the gorge 15 km east of Miyaneh; and (9) the area near Nodus for gold, base metals, molybdenum, and niobium, and possibly uranium. The Harsit River basin in Turkey appears to be a suitable target for geochemical exploration for gold and low-temperature hydrothermal deposits of base metals, barium, and mercury.

Open-File Report↗