SEARCH · Search USGS

Results for “Water Environment Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources

USGS2000

The materials flow of mercury in the economies of the United States and the world

Although natural sources of mercury exist in the environment, measured data and modeling results indicate that the amount of mercury released into the biosphere has increased since the beginning of the industrial age. Mercury is naturally distributed in the air, water, and soil in minute amounts, and can be mobile within and between these media. Because of these properties and the subsequent impacts on human health, mercury was selected for an initial materials flow study, focusing on the United States in 1990. This study was initiated to provide a current domestic and international analysis. As part of an increased emphasis on materials flow, this report researched changes and identified the associated trends in mercury flows; it also updates statistics through 1996. In addition to domestic flows, the report includes an international section, because all primary mercury-producing mines are currently foreign, 86 percent of the mercury cell sector of the worldwide chlor-alkali industry is outside the United States, there is a large international mercury trade (1,395 t 1 in 1996), and environmental regulations are not uniform or similarly enforced from country to country. Environmental concerns have brought about numerous regulations that have dramatically decreased both the use and the production of mercury since the late 1980?s. Our study indicates that this trend is likely to continue into the future, as the world eliminates the large mercury inventories that have been stockpiled to support prior industrial processes and products.

Circular↗

USGS2018

Biocrusts: The living skin of the Earth

Biological soil crusts (biocrusts) form a “living skin” at the soil surface in many low productivity ecosystems around the world including water- and cold-limited environments, and early successional seres (Belnap et al. 2003). They may be composed of any configuration of soil surface-dwelling cyanobacteria, eukaryotic algae, lichens, mosses or liverworts, and support assemblages of decomposers and a faunal food web (Belnap et al. 2003). These soil surface communities have global relevance, as it has been recently estimated that they cover about 12% of the terrestrial surface currently (Rodriguez-Caballero et al. 2018). Biocrust communities are perhaps an ideal subject for the journal Plant and Soil, because they are simultaneously plant-like, due to their dominance by autotrophs, yet biocrusts are also clearly a physical feature of the soil given that component organisms are enmeshed in, adherent to, or otherwise in direct contact with the soil surface. The activity of the organisms is what engineers the well-aggregated thin layer at the soil surface that we recognize as a biocrust (Belnap et al. 2003). The contributions of biocrusts to ecosystem function has fueled much research interest, initially in the observation of biocrusts’ soil aggregating and erosion-resisting nature, and later as a multifunctional, globally-relevant ecosystem element instrumental in: 1. building or otherwise altering soil nutrient stocks through N-fixation (Elbert et al. 2012), dust trapping (Reynolds et al. 2001) and nutrient cycling (Strauss et al. 2012), 2. influencing hydrological properties of soil such as the water balance (Chamizo et al. 2016), and 3. The thermal energy balance of the ecosystem (Coradeau et al. 2016, Rutherford et al. 2017).

Plant and Soil↗

USGS2004

Vital signs monitoring plan for the Klamath Network: Phase I report

This report chronicles the Phase 1 stage of the vital signs monitoring program for the Klamath Network. It consists of two chapters and eleven appendixes. The purposes of Chapter One are to 1) describe the network administrative structure and approach to planning; 2) introduce the Klamath Network parks, their resources, and environmental settings; 3) explain the need for monitoring changes in resources and supporting environments; 4) identify key information gaps that limit understanding of how to best achieve these monitoring goals. The purpose of Chapter Two is to develop the descriptive information provided in Chapter One into a conceptual basis for vital signs monitoring and to present the Network’s initial suite of conceptual models. The Report Appendices provide in-depth information on a variety of topics researched in preparation of the report, including: detailed natural resource profiles for each park, supporting policies and guidelines, regional fire regimes, vegetation types of the parks, exotic species threats, interagency monitoring programs, air issues, water quality (Phase 1 Report), Network vital signs (Scoping Summary Report), rare species, and rare habitats of the parks.

Report↗

USGS2025

Identifying organic contaminants at trespass cannabis grows on federal land in California, USA

Despite the legalization of recreational cannabis in California, USA, illegal cannabis cultivation remains pervasive, partly through the establishment of illegal cultivation on public lands (trespass grows). These operations often illegally divert water for irrigation and perform unauthorized applications of chemical fertilizers and pesticides. This work investigates a broad suite of these chemicals, focusing on their persistence in topsoil and presence in water and bed sediment in adjacent streams. Quantitative analyses of pesticides were conducted (183 compounds in water; 176 in topsoil/bed sediment), supplemented by qualitative nontargeted screening at three trespass grows that had no active cultivation for 8 months to 2 years. Targeted multi-residue analysis of topsoil detected the insecticides bifenthrin, cyfluthrin, malathion and imidacloprid (with concentrations up to 38 ng/g dry weight, d.w.), and the fungicides fluopyram, myclobutanil, and triadimefon (concentrations up to 8.1 ng/g d.w.). No pesticides were detected in the companion water or streambed sediment samples from adjacent streams. In addition, no water samples were found to have measurable estrogenic activity. Nontargeted screening uncovered additional pesticides (i.e., spiromesifen, trinexapac) in the topsoil and cannabis-related compounds (i.e., cannabidol, delta9-tetrahydrocannabinol) in both topsoil and streambed sediment suggesting the likelihood of offsite transport of cannabis related compounds. Phthalate plasticizers, rubber-related compounds, pharmaceuticals and personal care product chemicals were detected in topsoil, water, and streambed sediment and may be related to extensive irrigation infrastructure installed at these trespass grows. This work begins to establish a contaminant profile associated with illegal cannabis growing activities, providing a foundation for future research focused on their potential ecological impacts.

California↗

USGS2011

Flow structures and sandbar dynamics in a canyon river during a controlled flood, Colorado River, Arizona

In canyon rivers, debris fan constrictions create rapids and downstream pools characterized by secondary flow structures that are closely linked to channel morphology. In this paper we describe detailed measurements of the three‐dimensional flow structure and sandbar dynamics of two pools along the Colorado River in the Grand Canyon during a controlled flood release from Glen Canyon Dam. Results indicate that the pools are characterized by large lateral recirculation zones (eddies) resulting from flow separation downstream from the channel constrictions, as well as helical flow structures in the main channel and eddy. The lateral recirculation zones are low‐velocity areas conducive to fine sediment deposition, particularly in the vicinity of the separation and reattachment points and are thus the dominant flow structures controlling sandbar dynamics. The helical flow structures also affect morphology but appear secondary in importance to the lateral eddies. During the controlled flood, sandbars in the separation and reattachment zones at both sites tended to build gradually during the rising limb and peak flow. Deposition in shallow water on the sandbars was accompanied by erosion in deeper water along the sandbar slope at the interface with the main channel. Erosion occurred via rapid mass failures as well as by gradual boundary shear stress driven processes. The flow structures and morphologic links at our study sites are similar to those identified in other river environments, in particular sharply curved meanders and channel confluences where the coexistence of lateral recirculation and helical flows has been documented.

Journal of Geophysical Research F: Earth Surface↗

USGS2013

Environmental factors that influence cyanobacteria and geosmin occurrence in reservoirs

Phytoplankton are small to microscopic, free-floating algae that inhabit the open water of freshwater, estuarine, and saltwater systems. In freshwater lake and reservoirs systems, which are the focus of this chapter, phytoplankton communities commonly consist of assemblages of the major taxonomic groups, including green algae, diatoms, dinoflagellates, and cyanobacteria. Cyanobacteria are a diverse group of single-celled organisms that can exist in a wide range of environments, not just open water, because of their adaptability [1-3]. It is the adaptability of cyanobacteria that enables this group to dominate the phytoplankton community and even form nuisance or harmful blooms under certain environmental conditions [3-6]. In fact, cyanobacteria are predicted to adapt favorably to future climate change in freshwater systems compared to other phytoplankton groups because of their tolerance to rising temperatures, enhanced vertical thermal stratification of aquatic ecosystems, and alterations in seasonal and interannual weather patterns [7, 8]. Understanding those environmental conditions that favor cyanobacterial dominance and bloom formation has been the focus of research throughout the world because of the concomitant production and release of nuisance and toxic cyanobacterial-derived compounds [4-6, 7-10]. However, the complex interaction among the physical, chemical, and biological processes within lakes, reservoirs, and large rivers often makes it difficult to identify primary environmental factors that cause the production and release of these cyanobacterial by-products.

South Carolina↗

USGS2017

Experimental observations on the decay of environmental DNA from bighead and silver carps

Interest in the field of environmental DNA (eDNA) is growing rapidly and eDNA surveys are becoming an important consideration for aquatic resource managers dealing with invasive species. However, in order for eDNA monitoring to mature as a research and management tool, there are several critical knowledge gaps that must be filled. One such gap is the fate of eDNA materials in the aquatic environment. Understanding the environmental factors that influence the decay of eDNA and how these factors impact detection probabilities over time and space could have significant implications for eDNA survey design and data interpretation. Here we experimentally explore decay of eDNA associated with bighead carp ( Hypophthalmichthys nobilis ) biological waste collected from an aquaculture filtration system and with sperm collected from captive silver carp ( H. molitrix ), and how decay may be influenced by differing levels of water turbulence, temperature, microbial load, and pH. We found that the decay patterns of eDNA associated with both H. nobilis biological waste and H. molitrix milt significantly fit monophasic exponential decay curves. Secondly, we observed that the highest temperature we tested resulted in a decay half-life as much as 5.5× more rapid than the lowest temperature we tested. When we suppressed microbial loads in eDNA samples, we observed that overall losses of eDNA were reduced by about 2.5×. When we amended eDNA samples with pond water the half-life of eDNA was reduced by about 2.25×, despite relatively little apparent increase in the overall microbial load. This pattern indicated that species constituency of the microbial community, in addition to microbial load, might play a critical role in eDNA degradation. A shift in pH from 6.5 to 8.0 in the samples resulted in a 1.6× reduction in eDNA halflife. Water turbulence in our study had no apparent effect on eDNA decay. When we combined different temperature, pH, and microbial load treatments to create a rapid decay condition and a slow decay condition, and tracked eDNA decay over 91 days, we observed a 5.0× greater loss of eDNA by Day 5 under rapid decay conditions than under slow decay conditions. At the end of the trials, the differences in eDNA loss between the rapid decay and baseline and slow decay conditions were 0.1× and 3.3×, respectively. Our results strongly demonstrate the potential for environmental factors to influence eDNA fate and, thus, the interpretation of eDNA survey results.

Management of Biological Invasions↗

USGS2015

Applied Geochemistry Special Issue on Environmental geochemistry of modern mining

Environmental geochemistry is an integral part of the mine-life cycle, particularly for modern mining. The critical importance of environmental geochemistry begins with pre-mining baseline characterization and the assessment of environmental risks related to mining, continues through active mining especially in water and waste management practices, and culminates in mine closure. The enhanced significance of environmental geochemistry to modern mining has arisen from an increased knowledge of the impacts that historical and active mining can have on the environment, and from new regulations meant to guard against these impacts. New regulations are commonly motivated by advances in the scientific understanding of the environmental impacts of past mining. The impacts can be physical, chemical, and biological in nature. The physical challenges typically fall within the purview of engineers, whereas the chemical and biological challenges typically require a multidisciplinary array of expertise including geologists, geochemists, hydrologists, microbiologists, and biologists. The modern mine-permitting process throughout most of the world now requires that potential risks be assessed prior to the start of mining. The strategies for this risk assessment include a thorough characterization of pre-mining baseline conditions and the identification of risks specifically related to the manner in which the ore will be mined and processed, how water and waste products will be managed, and what the final configuration of the post-mining landscape will be. In the Fall 2010, the Society of Economic Geologists held a short course in conjunction with the annual meeting of the Geological Society of America in Denver, Colorado (USA) to examine the environmental geochemistry of modern mining. The intent was to focus on issues that are pertinent to current and future mines, as opposed to abandoned mines, which have been the focus of numerous previous short courses. The geochemical challenges of current and future mines share similarities with abandoned mines, but differences also exist. Mining and ore processing techniques have changed; the environmental footprint of waste materials has changed; environmental protection has become a more integral part of the mine planning process; and most historical mining was done with limited regard for the environment. The 17 papers in this special issue evolved from the Society of Economic Geologists’ short course. The relevant geochemical processes encompass the source, transport, and fate of contaminants related to the life cycle of a mine. Contaminants include metals and other inorganic species derived from geologic sources such as ore and solid mine waste, and substances brought to the site for ore processing, such as cyanide to leach gold. Factors, such as mine-waste mineralogy, hydrologic setting, mine-drainage chemistry, and microbial activity, that affect the hydrochemical risks from mining are reviewed by Nordstrom et al. In another paper, Nordstrom discusses baseline characterization at mine sites in a regulatory framework, and emphasizes the influence of mineral deposits in producing naturally elevated concentrations of many trace elements in surface water and groundwater. Surface water quality in mineralized watersheds is influenced by a number of processes that act on daily (diel) cycles and can produce dramatic variations in trace element concentrations as described by Gammons et al. Pre-mining baseline characterization studies should strive to capture the magnitude of these diel variations. Desbarats et al., using a case study of mine drainage from a gold mine, illustrate how elements that commonly occur as negatively charged species (anions) in solution, such as arsenic as arsenate, behave in an opposite fashion than most metals, which occur as positively charged species (cations). Significant improvement in the understanding of factors that influence the toxicity of metals to aquatic organisms in surface water has highlighted the importance of aqueous chemistry, particularly dissolved organic carbon, as described by Smith et al. Stream sediment contamination is another important pathway for affecting aquatic organisms, as reviewed by Besser et al. Understanding and predicting environmental consequences from mining begins with knowing the mineralogy and mineral reactivity of the ore, the wastes, and of secondary minerals formed later. Jamieson et al. review the importance of mineralogical studies in mine planning and remediation. A number of types of site-specific studies are needed to identify environmental risks related to individual mines. Lapakko reviews the general framework of mine waste characterization studies that are integral to the mine planning process. Hageman et al. present a comparative study of several static tests commonly used to characterize mine waste. The mining and ore processing practices employed at a specific mine site will vary on the basis of the commodities being targeted, the geology of the deposit, the geometry of the deposit, and the mining and ore processing methods used. Thus, these factors, in addition to the waste management practices used, can result in a variety of end-member mine waste features, each of which has its own set of challenges. Open pit mines and underground mines require waste rock to be removed to access ore. Waste rock presents unique problems because the rock is commonly mineralized at sub-economic grades and has not been processed to remove potentially problematic minerals, such as pyrite. Amos et al. examine the salient aspects of the geochemistry of waste rock. Mill tailings – the waste material after ore minerals have been removed – are a volumetrically important solid waste at many mine sites. Their fine grain size and the options for their management make their behavior in the environment distinct from that of waste rock. Lindsay et al. describe some of these differences through three case-study examples. Subaqueous disposal of tailings is another option described by Moncur et al. Cyanide leaching for gold extraction is a common method throughout the world. Johnson describes environmental aspects of cyanidation. Uranium mining presents unique environmental challenges, particularly since in-situ recovery has seen widespread use. Campbell et al. review the environmental geochemistry of uranium mining and current research on bioremediation. Ore concentrates from many types of metal mining undergo a pyrometallurgical technique known as smelting to extract the metal. Slag is the result of smelting, and it may be an environmental liability or a valuable byproduct, as described by Piatak et al. Finally, the open pits that result from surface mining commonly reach below the water table. At the end of mining, these pits may fill to form lakes that become part of the legacy of the mine. Castendyk et al., in two papers, review theoretical aspects of the environmental limnology of pit lakes. They also describe approaches that have been used to model pit lake water balance, wall-rock contributions to pit lake chemistry, pit lake water quality, and limnological processes, such as vertical mixing, through the use of three case studies.

Applied Geochemistry↗

USGS2003

Excess nitrogen in selected thermal and mineral springs of the Cascade Range in northern California, Oregon, and Washington: Sedimentary or volcanic in origin?

Anomalous N 2 /Ar values occur in many thermal springs and mineral springs, some volcanic fumaroles, and at least one acid-sulfate spring of the Cascade Range. Our data show that N 2 /Ar values are as high as 300 in gas from some of the hot springs, as high as 1650 in gas from some of the mineral springs, and as high as 2400 in gas from the acid-sulfate spring on Mt. Shasta. In contrast, gas discharging from hot springs that contain nitrogen and argon solely of atmospheric origin typically exhibits N 2 /Ar values of 40–80, depending on the spring temperature. If the excess nitrogen in the thermal and mineral springs is of sedimentary origin then the geothermal potential of the area must be small, but if the nitrogen is of volcanic origin then the geothermal potential must be very large. End-member excess nitrogen (δ 15 N) is +5.3‰ for the thermal waters of the Oregon Cascades but is only about +1‰ for fumaroles on Mt. Hood and the acid-sulfate spring on Mt. Shasta. Dissolved nitrogen concentrations are highest for thermal springs associated with aquifers between 120 and 140°C. Chloride is the major anion in most of the nitrogen-rich springs of the Cascade Range, and N 2 /Ar values generally increase as chloride concentrations increase. Chloride and excess nitrogen in the thermal waters of the Oregon Cascades probably originate in an early Tertiary marine formation that has been buried by the late Tertiary and Quaternary lava flows of the High Cascades. The widespread distribution of excess nitrogen that has been generated in low to moderate-temperature sedimentary environments is further proof of the restricted geothermal potential of the Cascade Range.

Cascade Range↗

USGS2013

Brookian sequence well log correlation sections and occurrence of gas hydrates, north-central North Slope, Alaska

Gas hydrates are naturally occurring crystalline, ice-like substances that consist of natural gas molecules trapped in a solid-water lattice. Because of the compact nature of their structure, hydrates can effectively store large volumes of gas and, consequently, have been identified as a potential unconventional energy source. First recognized to exist geologically in the 1960s, significant accumulations of gas hydrate have been found throughout the world. Gas hydrate occurrence is limited to environments such as permafrost regions and subsea sediments because of the pressure and temperature conditions required for their formation and stability. Permafrost-associated gas hydrate accumulations have been discovered in many regions of the Arctic, including Russia, Canada, and the North Slope of Alaska. Gas hydrate research has a long history in northern Alaska. This research includes the drilling, coring, and well log evaluation of two gas hydrate stratigraphic test wells and two resource assessments of gas hydrates on the Alaska North Slope. Building upon these previous investigations, this report provides a summary of the pertinent well log, gas hydrate, and stratigraphic data for key wells related to gas hydrate occurrence in the north-central North Slope. The data are presented in nine well log correlation sections with 122 selected wells to provide a regional context for gas hydrate accumulations and the relation of the accumulations to key stratigraphic horizons and to the base of the ice-bearing permafrost. Also included is a well log database that lists the location, available well logs, depths, and other pertinent information for each of the wells on the correlation section.

Alaska↗

USGS1986

U.S. Geological Survey research in radioactive waste disposal - Fiscal years 1983, 1984, and 1985

The report summarizes progress on geologic and hydrologic research related to the disposal of radioactive wastes. The research is described according to whether it is related most directly to: (1) high-level and transuranic wastes, (2) low-level wastes, or (3) uranium mill tailings. Included is research applicable to the identification and geohydrologic characterization of waste-disposal sites, to investigations of specific sites where wastes have been stored, and to studies of regions or environments where waste-disposal sites might be located. A significant part of the activity is concerned with techniques and methods for characterizing disposal sites and studies of geologic and hydrologic processes related to the transport and (or) retention of waste radionuclides.

Water-Resources Investigations Report↗

USGS2007

Geochemistry of natural components in the near-field environment, Yucca Mountain, Nevada

The natural near-field environment in and around the emplacement drifts of the proposed nuclear waste repository at Yucca Mountain, Nevada, includes the host rock, dust, seepage, and pore water. The chemical compositions of these components have been determined for assessing possible chemical and mineralogical reactions that may occur after nuclear waste is emplaced. The rock hosting the proposed repository is relatively uniform as shown by a mean coefficient of variation (CV) of 9 percent for major elements. In contrast, compositional variations of dust (bulk and water-soluble fractions), pore water, and seepage are large with mean CVs ranging from 28 to 64 percent. ?? 2007 Materials Research Society.

Conference Paper↗

USGS2021

Informing future condition scenario planning for habitat specialists of the imperiled pine rockland ecosystem of South Florida

This project evaluated habitat conditions for two species found in the imperiled pine rockland ecosystem—the Rim Rock Crowned Snake ( Tantilla oolitica ) and the Key Ring-Necked Snake ( Diadophis punctatus acricus ). The Rim Rock Crowned Snake historically occurred in eastern Miami-Dade County (hereafter, mainland) as well as throughout the Florida Keys, whereas the Key Ring-Necked Snake occurs only in lower Florida Keys (Enge et al. 2004; Mays and Enge 2016). Both species are very elusive, small (< 20 cm in length) and primarily fossorial. Pine rockland habitat is rapidly disappearing in South Florida, with < 3 percent of its original extent remaining. Saltwater intrusion from hurricanes and sea-level rise (SLR), and human development pose the greatest threats to the longevity of this ecosystem which, in turn, places species that are endemic to this unique habitat at risk of extinction. The Rim Rock Crowned Snake and the Key Ringed-Necked Snake are being considered for listing by the U.S. Fish and Wildlife Service (USFWS). To aid the agency’s decision, it must be able to forecast species’ responses to potential future environmental conditions, as well as to different conservation and management actions. Yet, the information needed to complete these forecasts—such as population trends, life history traits, habitat use, and future land use and climate conditions—is often lacking for most rare species. This is especially problematic for assessments of species resiliency to changes in climate and land use. When these types of data are lacking, information on habitat quality can be used to help determine how a species will respond to change. First, this project gathered current and historical records for both species from various sources such as museum specimens, inventories, and other personal account. Then, we identified potential future changes in habitat that could result from different management actions, such as habitat acquisition or restoration, and environmental conditions, such as changes in the frequency and intensity of tropical storms and rates of SLR. Researchers then explored the potential impacts of these habitat condition changes on the Rim Rock Crowned Snake and Key Ring-Necked Snake. This information can be used by the USFWS to help make decisions about the need to protect these species under the Endangered Species Act and could inform the conservation, management, and recovery of other at-risk species found in the pine rockland ecosystem. This work supports the Secretary of Interior’s priority to create a conservation stewardship legacy by using science to identify best practices to manage land and water resource and adapt to changes in the environment.

Florida↗

USGS2014

Experimental design and quality assurance: in situ fluorescence instrumentation

Both instrument design and capabilities of fluorescence spectroscopy have greatly advanced over the last several decades. Advancements include solid-state excitation sources, integration of fiber optic technology, highly sensitive multichannel detectors, rapid-scan monochromators, sensitive spectral correction techniques, and improve data manipulation software (Christian et al., 1981, Lochmuller and Saavedra, 1986; Cabniss and Shuman, 1987; Lakowicz, 2006; Hudson et al., 2007). The cumulative effect of these improvements have pushed the limits and expanded the application of fluorescence techniques to numerous scientific research fields. One of the more powerful advancements is the ability to obtain in situ fluorescence measurements of natural waters (Moore, 1994). The development of submersible fluorescence instruments has been made possible by component miniaturization and power reduction including advances in light sources technologies (light-emitting diodes, xenon lamps, ultraviolet [UV] lasers) and the compatible integration of new optical instruments with various sampling platforms (Twardowski et at., 2005 and references therein). The development of robust field sensors skirt the need for cumbersome and or time-consuming filtration techniques, the potential artifacts associated with sample storage, and coarse sampling designs by increasing spatiotemporal resolution (Chen, 1999; Robinson and Glenn, 1999). The ability to obtain rapid, high-quality, highly sensitive measurements over steep gradients has revolutionized investigations of dissolved organic matter (DOM) optical properties, thereby enabling researchers to address novel biogeochemical questions regarding colored or chromophoric DOM (CDOM). This chapter is dedicated to the origin, design, calibration, and use of in situ field fluorometers. It will serve as a review of considerations to be accounted for during the operation of fluorescence field sensors and call attention to areas of concern when making this type of measurement. Attention is also given to ways in which in-water fluorescence measurements have revolutionized biogeochemical studies of CDOM and how those measurements can be used in conjunction with remotely sense satellite data to understand better the biogeochemistry of DOM in aquatic environments.

Book chapter↗

USGS2020

The method controls the story - Sampling method impacts on the detection of pore-water nitrogen concentrations in streambeds

Biogeochemical gradients in streambeds are steep and can vary over short distances often making adequate characterisation of sediment biogeochemical processes challenging. This paper provides an overview and comparison of streambed pore-water sampling methods, highlighting their capacity to address gaps in our understanding of streambed biogeochemical processes. This work reviews and critiques available pore-water sampling techniques to characterise streambed biogeochemical conditions, including their characteristic spatial and temporal resolutions, and associated advantages and limitations. A field study comparing three commonly-used pore-water sampling techniques (multilevel mini-piezometers, miniature drivepoint samplers and diffusive equilibrium in thin-film gels) was conducted to assess differences in observed nitrate and ammonium concentration profiles. Pore-water nitrate concentrations did not differ significantly between sampling methods ( p -value = 0.54) with mean concentrations of 2.53, 4.08 and 4.02 mg l − 1 observed with the multilevel mini-piezometers, miniature drivepoint samplers and diffusive equilibrium in thin-film gel samplers, respectively. Pore-water ammonium concentrations, however, were significantly higher in pore-water extracted by multilevel mini-piezometers (3.83 mg l − 1 ) and significantly lower where sampled with miniature drivepoint samplers (1.05 mg l − 1 , p -values <0.01). Differences in observed pore-water ammonium concentration profiles between active (suction: multilevel mini-piezometers) and passive (equilibrium; diffusive equilibrium in thin-film gels) samplers were further explored under laboratory conditions. Measured pore-water ammonium concentrations were significantly greater when sampled by diffusive equilibrium in thin-film gels than with multilevel mini-piezometers (all p -values ≤0.02). The findings of this study have critical implications for the interpretation of field-based research on hyporheic zone biogeochemical cycling and highlight the need for more systematic testing of sampling protocols. For the first time, the impact of different active and passive pore-water sampling methods is addressed systematically here, highlighting to what degree the choice of pore-water sampling methods affects research outcomes, with relevance for the interpretation of previously published work as well as future studies.

Science of the Total Environment↗

USGS2000

Cadmium toxicity among wildlife in the Colorado Rocky Mountains

Cadmium is known to be both extremely toxic and ubiquitous in natural environments. It occurs in almost all soils, surface waters and plants, and it is readily mobilized by human activities such as mining. As a result, cadmium has been named as a potential health threat to wildlife species; however, because it exists most commonly in the environment as a trace constituent, reported incidences of cadmium toxicity are rare. Here we have measured trace metals in the food web and tissues of white-tailed ptarmigan (Lagopus leucurus) in Colorado. Our results suggest that cadmium toxicity may be more common among natural populations of vertebrates than has been appreciated to date and that cadmium toxicity may often go undetected or unrecognized. In addition, our research shows that ingestion of even trace quantities of cadmium can influence not only the physiology and health of individual organisms, but also the demographics and the distribution of species.

Nature↗

USGS1978

Summary appraisals of the Nation's ground-water resources; Alaska

Alaska has enormous surface-water resources, but many of the streams are frozen for most of the year and most contain glacial silt that makes them unacceptable for human use. These factors lend special significance to ground water as a water-supply source, even though perennially frozen ground (permafrost) profoundly modifies ground-water flow systems in much of Alaska north of the maritime southern coast and southeastern panhandle areas. Frozen ground is a virtually impermeable layer that restricts recharge, discharge, and movement of ground water, acts as a confining layer and limits the volume of unconsolidated deposits and bedrock in which water may be stored. Ground water is an untested resource in most of Alaska, but in many areas potential development of ground water far exceeds current use. Alluvium of major river valleys, such as the Yukon, Tanana, Kuskokwim and Susitna Rivers, probably contains the most extensive aquifers in the State. Large amounts of ground water are also stored in glacial outwash aquifers that underlie coastal basins and valleys, such as those at Kenai and Anchorage in the Cook Inlet lowland. Individual wells yielding more than 1,000 gallons per minute have been developed in the Tanana River valley, Cook Inlet lowland, and the coastal valleys at Seward and Juneau. Comparable yields should be possible in other areas that have similar geohydrologic environments. No major aquifers have been identified in glacial and glaciolacustrine deposits of interior valleys or in deltaic deposits. Major bedrock aquifers have been identified only in carbonate rocks of the Brooks Range and on the north side of the Alaska Range. Springs issuing from the carbonate rocks of the Brooks Range have discharges as great as 16,000 gallons per minute. Most ground-water recharge occurs beneath reaches of stream channels that are losing flow to the ground-water system. Most ground-water discharge also takes place along reaches of stream channels. This discharge augments streamflows during summer and maintains low flows during winter when there is no surface-water runoff. On the basis of a streamflow hydrograph separation technique and using the 60 percent flow-duration value as an indicator of ground-water discharge, it is estimated that 25 percent of the total volume of streamflow in Alaska (exclusive of coastal, maritime environments) is contributed by ground-water discharge. The thawing of frozen ground in the permafrost regions of Alaska causes construction and engineering problems. Disturbance of the ground surface disrupts the natural thermal equilibrium and tends to thaw part of the permafrost. Thawing can cause loss of strength, a decrease in volume, and an increase in erosion potential, particularly if the frozen ground is fine grained and poorly drained. Present deficiencies in the ground-water information base are obvious limiting factors to ground-water development in Alaska. There is a need to extend the ground-water data-collection network and to pursue special research into the quantitative aspects of ground-water hydrology in cold regions, particularly the continuous permafrost zone.

Alaska↗

USGS2010

Spatial and stage-structured population model of the American crocodile for comparison of comprehensive Everglades Restoration Plan (CERP) alternatives

As part of the U.S. Geological Survey Priority Ecosystems Science (PES) initiative to provide the ecological science required during Everglades restoration, we have integrated current regional hydrologic models with American crocodile (Crocodylus acutus) research and monitoring data to create a model that assesses the potential impact of Comprehensive Everglades Restoration Plan (CERP) efforts on the American crocodile. A list of indicators was created by the Restoration Coordination and Verification (RECOVER) component of CERP to help determine the success of interim restoration goals. The American crocodile was established as an indicator of the ecological condition of mangrove estuaries due to its reliance upon estuarine environments characterized by low salinity and adequate freshwater inflow. To gain a better understanding of the potential impact of CERP restoration efforts on the American crocodile, a spatially explicit crocodile population model has been created that has the ability to simulate the response of crocodiles to various management strategies for the South Florida ecosystem. The crocodile model uses output from the Tides and Inflows in the Mangroves of the Everglades (TIME) model, an application of the Flow and Transport in a Linked Overland/Aquifer Density Dependent System (FTLOADDS) simulator. TIME has the capability to link to the South Florida Water Management Model (SFWMM), which is the primary regional tool used to assess CERP restoration scenarios. A crocodile habitat suitability index and spatial parameter maps that reflect salinity, water depth, habitat, and nesting locations are used as driving functions to construct crocodile finite rate of increase maps under different management scenarios. Local stage-structured models are integrated with a spatial landscape grid to display crocodile movement behavior in response to changing environmental conditions. Restoration efforts are expected to affect salinity levels throughout the habitat of the American crocodile. This modeling effort examines how CERP restoration alternatives will affect growth and survival rates of hatchling and juvenile crocodiles, hatchling dispersal to suitable nursery habitat, and relative abundance and distribution in response to changing salinity and water depth for all stage classes of crocodiles. The response of the American crocodile to restoration efforts will provide a quantifiable measure of restoration success. By applying the crocodile model to proposed restoration alternatives and predicting population responses, we can choose alternatives that approximate historical conditions, enhance habitat for multiple species, and identify future research needs.

Open-File Report↗