SEARCH · Search USGS

Results for “Journal of Structural Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

356 records · Page 20Linked to original sources

USGS1989

Characterization of coal-derived hydrocarbons and source-rock potential of coal beds, San Juan Basin, New Mexico and Colorado, U.S.A.

Coal beds are considered to be a major source of nonassociated gas in the Rocky Mountain basins of the United States. In the San Juan basin of northwestern New Mexico and southwestern Colorado, significant quantities of natural gas are being produced from coal beds of the Upper Cretaceous Fruitland Formation and from adjacent sandstone reservoirs. Analysis of gas samples from the various gas-producing intervals provided a means of determining their origin and of evaluating coal beds as source rocks. The rank of coal beds in the Fruitland Formation in the central part of the San Juan basin, where major gas production occurs, increases to the northeast and ranges from high-volatile B bituminous coal to medium-volatile bituminous coal ( R m values range from 0.70 to 1.45%). On the basis of chemical, isotopic and coal-rank data, the gases are interpreted to be thermogenic. Gases from the coal beds show little isotopic variation ( δ 13 C 1 values range −43.6 to −40.5 ppt), are chemically dry (C 1 /C 1–5 values are > 0.99), and contain significant amounts of CO 2 (as much as 6%). These gases are interpreted to have resulted from devolatilization of the humic-type bituminous coal that is composed mainly of vitrinite. The primary products of this process are CH 4 , CO 2 and H 2 O. The coal-generated, methane-rich gas is usually contained in the coal beds of the Fruitland Formation, and has not been expelled and has not migrated into the adjacent sandstone reservoirs. In addition, the coal-bed reservoirs produce a distinctive bicarbonate-type connate water and have higher reservoir pressures than adjacent sandstones. The combination of these factors indicates that coal beds are a closed reservoir system created by the gases, waters, and associated pressures in the micropore coal structure. In contrast, gases produced from overlying sandstones in the Fruitland Formation and underlying Pictured Cliffs Sandstone have a wider range of isotopic values ( δ 13 C 1 values range from −43.5 to −38.5 ppt), are chemically wetter (C 1 /C 1–5 values range from 0.85 to 0.95), and contain less CO 2 (< 2%). These gases are interpreted to have been derived from type III kerogen dispersed in marine shales of the underlying Lewis Shale and nonmarine shales of the Fruitland Formation. In the underlying Upper Cretaceous Dakota Sandstone and Tocito Sandstone Lentil of the Mancos Shale, another gas type is produced. This gas is associated with oil at intermediate stages of thermal maturity and is isotopically lighter and chemically wetter at the intermediate stage of thermal maturity as compared with gases derived from dispersed type III kerogen and coal; this gas type is interpreted to have been generated from type II kerogen. Organic matter contained in coal beds and carbonaceous shales of the Fruitland Formation has hydrogen indexes from Rock-Eval pyrolysis between 100 and 350, and atomic H:C ratios between 0.8 and 1.2. Oxygen indexes and atomic O:C values are less than 24 and 0.3, respectively. Extractable hydrocarbon yields are as high as 7,000 ppm. These values indicate that the coal beds and carbonaceous shales have good potential for the generation of liquid hydrocarbons. Voids in the coal filled with a fluorescent material that is probably bitumen is evidence that liquid hydrocarbon generation has taken place. Preliminary oil-source rock correlations based on gas chromatography and stable carbon isotope ratios of C 15+ hydrocarbons indicate that the coals and (or) carbonaceous shales in the Fruitland Formation may be the source of minor amounts of condensate produced from the coal beds at relatively low levelsof thermal maturity ( R m =0.7).

International Journal of Coal Geology↗

USGS2007

Origin of the Lyme Dome and implications for the timing of multiple Alleghanian deformational and intrusive events in southern Connecticut

Geologic mapping, structural analysis, and geochronology in the area of the Lyme dome, southern Connecticut provides constraints on the origin of the rocks in the core of the dome, the absolute timing of the principal deformational and thermal events attributed to Alleghanian orogenesis, and the processes that generated the dome. Detrital zircon geochronology in combination with ages on intrusive rocks brackets the deposition of quartzite in the core of the dome sometime between ca. 925 and 620 Ma. Granite and granodiorite intruded the Neoproteorozic metasedimentary rocks in the core of the dome at ca. 620 to 610 Ma. Four major early Permian events associated with the Alleghanian orogeny affected the rocks in the Lyme dome area. Syn-tectonic migmatization and widespread penetrative deformation (D1, ca. 300 - 290 Ma) included emplacement of alaskite at 290 ?? 4 Ma during regional foliation development and aluminosilicate-orthoclase metamorphic conditions. Rocks of the Avalon terrane may have wedged between Gander cover rocks and Gander basement in the core of the Lyme during D1. Limited structural evidence for diapiric uplift of the Lyme dome indicates that diapirism started late in D1 and was completed by D2 (ca. 290 - 280 Ma) when horizontal WNW contractional stresses dominated over vertical stresses. Second sillimanite metamorphism continued and syn-tectonic D2 granite pegmatite (288 ?? 4 Ma) and the Joshua Rock Granite Gniess (284 ?? 3 Ma) intruded at this time. North-northwest extension during D3 (ca. 280 - 275 Ma) led to granitic pegmatite intrusion along S3 cleavage planes and in extensional zones in boudin necks during hydraulic failure and decompression melting. Intrusion of a Westerly Granite dike at 275 ?? 4 Ma suggests that D3 extension was active, and perhaps concluding, by ca. 275 Ma. Late randomly oriented but gently dipping pegmatite dikes record a final stage of intrusion during D4 (ca. 275 - 260 Ma), and a switch from NNW extension to vertical unloading and exhumation. Monazite and metamorphic zircon rim ages record this event at ca. 259 Ma. The evolution of the Lyme dome involved D1 mylonitization, intrusion, and migmatization during north-directed contraction, limited late D1 diapirism, D2 migmatization during WNW contraction with associated flexural flow and fold interference, D3 NNW horizontal extension and decompression melting, and final D4 vertical extension and rapid exhumation. Late regional uplift, extension, and normal faulting at higher crustal levels may have been caused by diapiric rise of the lower crust, below the structural level of the Lyme dome. The rocks record no evidence of Acadian metamorphism or deformation, suggesting that the Gander zone here was not tectonically juxtaposed with Avalon until the Alleghanian orogeny.

American Journal of Science↗

USGS2017

Fluid-driven uplift at Long Valley Caldera, California: Geologic perspectives

Since persistent seismicity began in the Sierra Nevada adjacent to Long Valley caldera in 1978–1980, intracaldera unrest has been marked by (1) episodes of uplift totaling ~ 83 cm, centered on the middle Pleistocene resurgent dome, and (2) recurrent earthquake swarms along a 12-km-long segment of the caldera's ring-fault zone that is contiguous with both the dome and the Sierran seismogenic domain. Others have attributed the recent unrest to magmatic intrusion(s), but it is argued here that evidence for new magma is lacking and that ongoing uplift and ring-fault-zone seismicity are both promoted by ascent of aqueous fluid released by second boiling of the residue of the enormous Pleistocene rhyolitic reservoir terminally crystallizing at depths ≥ 10 km. For 2 Myr, eruptive vent clusters migrated southwestward from Glass Mountain to Mammoth Mountain. There has been no eruption on the resurgent dome since 500 ka, and since 230 ka volcanism has been restricted to the caldera's west moat and contiguous Sierran terrain, both outside the structural caldera. High-temperature hydrothermal activity in the central caldera waned after ~ 300 ka, cooling the Pleistocene rhyolitic focus to the extent that drilling on the resurgent dome found mid-caldera temperature to be only 100 °C and isothermal at depths of 2–3 km. Beneath most of the resurgent dome, there is little seismicity at any depth, no emission of magmatic CO 2 or other magmatic gases, no elevated 3 He/ 4 He ratios, and only normal to below-normal heat flow. Most of the 75-km-long ring-fault zone is likewise aseismic, excepting only the 12-km segment contiguous with the extracaldera seismogenic domain in the Sierra. Since 1980, the Sierran seismicity has released 3.6 times more cumulative seismic energy than have intracaldera earthquakes. The caldera seismicity is not driven by stresses associated with the adjacent uplift but, instead, by the extracaldera tectonic stressfield. Sierran seismicity activated the directly contiguous south-moat segment of the ring-fault zone, which had originated in the caldera-forming eruption at 767 ka and everywhere else remains sealed. Hypocenter relocation studies of 1000s of earthquakes along the seismic segment have resolved recurrent upward-migrating swarms within networks of cryptic faults, apparently triggered by rapidly ascending pulses of high-pressure low-viscosity aqueous fluid. Entering the brittle crust at depths of 8–10 km, such fluid is just what should be expected from second boiling of the late-stage CO 2 -poor rhyolitic residue. The fluid provides the pressure source above the apex of the crystallizing caldera-wide pluton and then escapes laterally to the newly reactivated southern segment of the ring-fault zone, its only available permeable pathway, where it mediates the ongoing south-moat seismicity.

California↗

USGS1997

Crustal structure along the west flank of the Cascades, western Washington

Knowledge of the crustal structure of the Washington Cascades and adjacent Puget Lowland is important to both earthquake hazards studies and geologic studies of the evolution of this tectonically active region. We present a model for crustal velocity structure derived from analysis of seismic refraction/wide-angle reflection data collected in 1991 in western Washington. The 280-km-long north-south transect skirts the west flank of the Cascades as it crosses three tectonic provinces including the Northwest Cascades Thrust System (NWCS), the Puget Lowland, and the volcanic arc of the southern Cascades. Within the NWCS, upper crustal velocities range from 4.2 to 5.7 km s-1 and are consistent with the presence of a diverse suite of Mesozoic and Paleozoic metasediments and metavolcanics. In the upper 2-3 km of the Puget Lowland velocities drop to 1.7-3.5 km s-1 and reflect the occurrence of Oligocene to recent sediments within the basin. In the southern Washington Cascades, upper crustal velocities range from 4.0 to 5.5 km s-1 and are consistent with a large volume of Tertiary sediments and volcanics. A sharp change in velocity gradient at 5-10 km marks the division between the upper and middle crust. From approximately 10 to 35 km depth the velocity field is characterized by a velocity increase from ???6.0 to 7.2 km s-1. These high velocities do not support the presence of marine sedimentary rocks at depths of 10-20 km beneath the Cascades as previously proposed on the basis of magnetotelluric data. Crustal thickness ranges from 42 to 47 km along the profile. The lowermost crust consists of a 2 to 8-km-thick transitional layer with velocities of 7.3-7.4 km s-1. The upper mantle velocity appears to be an unusually low 7.6-7.8 km s-1. When compared to velocity models from other regions, this model most closely resembles those found in active continental arcs. Distinct seismicity patterns can be associated with individual tectonic provinces along the seismic transect. In the NWCS and Puget Lowland, most of the seismicity occurs below the base of the upper crust as defined by a seismic boundary at 5-10 km depth and continues to 20-30 km depth. The region of transition between the NWCS and the Puget Lowland appears as a gap in seismicity with notably less seismic activity north of the boundary between the two. Earthquakes within the Cascades are generally shallower (0-20 km) and are dominated by events associated with the Rainier Seismic Zone.

Washington↗

USGS2019

Reflectance increase from broad beam ion milling of coals and organic-rich shales due to increased surface flatness

Broad ion beam (BIB) milling is useful in organic petrology because it can yield flat sample surfaces and avert the ‘smearing’ of organic matter (OM) that results from traditional mechanical polishing. This potentially makes BIB especially useful in the study of nano-porosity, where even minor mechanical disruption of the sample surface distorts the sample characteristic of interest—the pore structure. However, several studies have observed an OM reflectance increase after BIB milling, concluding that ion milling may cause thermal alteration to OM surfaces. To better understand ion milling effects on organic matter, coal (subbituminous, high volatile bituminous, medium volatile bituminous, anthracite) and shale [Bakken Formation, Ohio Shale-Huron Member (5), Kimmeridge Clay Formation, Alum Shale, New Albany Shale] samples were prepared using traditional mechanical polishing methods. Reflectance measurements (% Ro) were gathered on all maceral types present before BIB milling, followed by re-measurement of OM reflectance at the same locations after milling. Most OM increased in reflectance after BIB milling, with some exceptions in high maturity samples. Liptinite macerals in both coal and shale samples showed the greatest percent reflectance increase on average (+133%; n=338), followed by solid bitumen (+49%; n=313), vitrinite (+26%; n=413), and inertinite (+9%; n=220). Despite the increases to OM reflectance caused by BIB milling, no evidence was found for kerogen conversion (e.g., change in maceral abundances), or for migration of newly generated petroleum (e.g., pseudomorphic replacement of kerogen by solid bitumen). Such changes occur when samples are thermally altered from immature conditions into the oil window (e.g., by hydrous pyrolysis), and, if the increases in OM reflectance were thermally driven (by BIB milling), they should have been observed in the above experiments. Herein, we also used atomic force microscopy to document a decrease in surface roughness of correlative locations of OM on pre- and post-ion milled samples. This improved surface polish caused by BIB milling appears to be the root cause of increased OM reflectance, as no other supporting evidence of thermal alteration could be found. That is, the fraction of light formerly lost to oblique scatter in diffuse reflectance from a mechanically polished surface is converted to specular reflectance after BIB ion milling. Thus the light leaves the surface at a near normal angle and returns to the detector, resulting in increased OM reflectance.

International Journal of Coal Geology↗

USGS1996

Characterizing coal beds in western Kentucky with the Al-La-Sc coherent triad

Cyclic sedimentation and lateral facies changes make coal bed correlations inconclusive and difficult. This uncertainty can be further complicated if a coal basin has been structurally deformed. Coal macerals can be studied to indicate the nature and degree of coalification. Their use in coal bed correlation, however, is limited. Most of the trace elements and their ratios that have been studied show significant within-bed lateral and stratigraphic variations, and thus are not effective in correlating coal beds regionally. Geochemically coherent groups of elements, such as rare earth elements (REE) and platinum group elements (PGE), appear to be highly differentiated in coal-forming environments. Geochemical coherent elemental triads appear to be useful for coal bed identification or fingerprinting. The best triad which was demonstrated to be effective in coal bed characterization in western Kentucky, is that of Al, La and Sc. These three elements are highly correlated with one another and they can be determined accurately and simultaneously with instrumental neutron activation analysis (INAA). The elemental triad Al-La-Sc is used to identify and fingerprint three key coal beds in western Kentucky: the Springfield (western Kentucky No. 9), the Davis (western Kentucky No. 6), and the Mining City and Dawson Springs are both considered to be the No. 4 coal bed in western Kentucky). Four distinct groupings can be recognized by use of the Al-La-Sc triad. The Dawson Springs coals have the highest Al/(La + Sc) ratios, followed by the Springfield, the Davis and the Mining City. The Mining City coal bed generally has the highest La/Sc ratio. However, the Dawson Springs is not correlated with the Mining City using the triad analysis, even though they have reportedly similar stratigraphic positions in the western Kentucky coal basin. The Al-La-Sc triad appears to be effective in discriminating between the Springfield and the Davis coal beds throughout the entire Illinois Basin. Furthermore, the range of concentration variation of the AL-La-Sc triad suggests individual groupings of the No. 4 coal in western Kentucky. In addition to characterizing these coal beds, the Al-La-Sc triad may be used to confirm stratigraphic correlations.

International Journal of Coal Geology↗

USGS2012

Geology of the Mount St. Helens area: Record of discontinuous volcanic and plutonic activity in the Cascade Arc of southern Washington

The Quaternary edifice of Mount St. Helens volcano was built upon a deeply eroded terrane of gently folded and altered volcanic and plutonic rocks that represent the core of the Tertiary Cascade magmatic arc. These rocks constitute an east dipping homoclinal sequence, several kilometers thick, of subaerially erupted mafic to silicic flows and volcaniclastic strata; K‐Ar ages from this section range from about 28 to 23 Ma (late Oligocene and earliest Miocene), which corresponds to an apparent lull in Cascade volcanism to the north of Mount Rainier. Volcanism was essentially continuous during this period of time, and neither a well‐defined base nor top of the section is exposed within the mapped area. Basalt and basaltic andesite dominate the lower part of the mid‐Tertiary section, whereas andesitic and dacitic rocks comprise most of the upper part. This section was intruded by numerous mafic to silicic dikes, sills, and irregular plutonic bodies, most no more than a few million years younger than their host rocks, and subjected to pervasive burial metamorphism and widespread hydrothermal alteration. Large areas of hornfelsed rock surrounding even relatively small intrusions indicate that the proportion of plutonic rock becomes significantly greater at shallow depth beneath the existing erosion surface. A large granitic pluton intruded the mid‐Tertiary section north of Spirit Lake at about 21 Ma. The Earl porphyry copper deposit occurs within the pluton but appears too young (17 Ma) to be genetically related to it. In contrast to the rather continuous and voluminous Oligocene to early Miocene activity, volcanism since then in the Mount St. Helens area has been localized and Volumetrically minor. Products of three younger eruptive periods have been recognized: a sequence of 15 m.y. old pyroxene andesite flows resting unconformably on mid‐Tertiary strata south of Mount St. Helens, widespread shallow dikes and sills of pyroxene andesite between 10 and 8 m.y. old, and compositionally diverse rocks erupted during the past 3 m.y. The Quaternary lavas are more potassic than the Tertiary lavas and typically contain phenocrysts of hornblende and biotite, which are absent from the older rocks. A number of Tertiary structures define a broad NNE trending zone that may reflect a deep‐seated lithospheric flaw that has controlled the locus of Cascade magmatism in southern Washington for the past 25 m.y. Mount St. Helens lies within this zone at the intersection of the NNW striking St. Helens seismic zone (SHZ) and an ENE trending alignment of Pleistocene silicic plug‐domes. No surface breakage has been detected along the SHZ, which is apparently very young. The linear zone of silicic vents is probably controlled by a fault that has been interpreted from seismic records to occur directly beneath the volcano. This zone parallels the directions of regional maximum horizontal compressive stress and North America/Juan de Fuca plate convergence. Mount St. Helens is an example of a low‐volume tectonically controlled magmatic system in an early stage of development.

Washington↗

USGS1985

Stratigraphic and interregional changes in Pennsylvanian coal-swamp vegetation: Environmental inferences

Quantitative analysis of Pennsylvanian coal-swamp vegetation provides a means of inferring organization and structure of communities. Distribution of these communities further provides inferences about environmental factors, including paleoclimate. Our observations are based on in situ, structurally preserved peat deposits in coal-ball concretions from 32 coal seams in the eastern one-half of the United States and from several seams in western Europe and on spore assemblages from more than 150 seams. There were three times of particularly significant and nearly synchronous vegetational changes in the Midcontinent and Appalachian coal regions during the Pennsylvanian Period. Each was different in kind and magnitude. The first marked changes occurred during the early part of the Middle Pennsylvanian with the fluctuating decline in the high level of lycopod dominance. The abundance of cordaites increased. There was a rise in the occurrences of the lycopod herbs to form intercalated marshlands and an overall increase in floral diversity. Changes ensuing from this time also include shifts in dominant species of lycopod trees and a sustained rise in abundance and diversity of tree-fern spores. The next significant time of change was during the middle part of the Middle Pennsylvanian, representing both a culmination of earlier trends and expansions of cordaites in the Midcontinent where there was a maximum change in species without net loss of diversity. Tree ferns and medullosan pteridosperms attained subdominant levels of abundance and diverse lycopod species dominated except in the Atokan-Desmoinesian transition of the Midcontinent. The third and sharpest break occurred near the Middle—Late Pennsylvanian boundary when extinctionsof the dominant, coal-swamp lycopods allowed development of tree-fern dominance. The Late Pennsylvanian coal swamps apparently were colonized or recolonized mainly by species from outside coal swamps rather than by the survivor populations of the Middle Pennsylvanian swamps. Paralleling the changes in floras through the Pennsylvanian are changes in preservational aspects of the peat. These include a decline in shoot/root ratios from approximately 1 to < 1 during the first time of vegetational changes and a rise in this ratio during the second; there was a parallel rise and fall in fusain abundance and a rise in wood/periderm ratios. The stratigraphic distribution of identified coal resources in the United States is interpreted as largely dependent on net changes in relative wetness of Pennsylvanian coal swamps, a pattern of drying during the first period of vegetational change, followed by a concomitant increase in continuous wet climate with brackish influence in the Midcontinent during the second; this was followed by a time of extreme moisture stress bringing on the third, and most severe, vegetational change.

International Journal of Coal Geology↗

USGS1997

A geologic history of the north-central Appalachians, part 2: The Appalachian basin from the Silurian through the Carboniferous

The north-central Appalachians occupy a critical position within the 3000+ km-long Appalachian orogen, lying southwest of the boundary between the central and northern Appalachians (CNAB). The one-billion-year-long history of tectonic activity in the north-central Appalachians includes the assembly and breakup of a late Proterozoic supercontinent, the creation and evolution of the Appalachian orogen during the Paleozoic, and the Mesozoic transformation of the active orogen into a passive margin during Pangea's disassembly. An important part of the Middle and Late Paleozoic history is the formation and growth of the Appalachian basin, an enormous, elongate continental basin lying cratonward of the active Appalachian internides along Laurentia's eastern margin. The Appalachian basin developed out of the Taconic orogeny, the second of the four orogenies that formed and modified the character of the Appalachian orogen. Prior to the Taconic orogeny, the eastern margin of Laurentia consisted of a broad carbonate shelf facing the Theic Ocean. The Taconic orogeny obduced various Theic components, including microcontinents, magmatic arcs, and accretionary prisms, onto the carbonate shelf. The resulting Taconic highlands formed a topographic barrier between Theia and the craton's interior. Because tectonic activity in the internides continued more or less throughout the remainder of the Paleozoic, the Appalachian basin never had a direct connection with Theia. The coarse-grained molasse from the newly uplifted Taconic highland spread westward over most of the basin during the Early Silurian. Carbonate deposition gradually encroached eastward over the basin as the siliciclastic input from the southeast waned. A resurgence in the earliest Late Silurian, perhaps related to orogenesis in Newfoundland and the Maritimes, expanded the clastic wedge somewhat. Before long, however, carbonate deposition once again dominated most of the north-central basin for the remainder of the Silurian and into the Early Devonian. The Early-to-Middle Devonian Acadian orogeny began introducing siliciclastic material into the eastern part of the Appalachian basin, thereby ending the largely paralic environment that persisted from the Late Silurian. A number of deltas formed around local sediment-input centers during the Middle Devonian. Continued uplift and/or orogenesis must have continued into the Late Devonian because a vast amount of terrigenous sediment was introduced into the Appalachian basin to form the vast Upper Devonian Catskill delta. Although the principal tectonic activity appears to have centered in New England, the large volume of sediment input suggests that orogenesis may have extended southward to the north-central Appalachians. However, direct evidence of actual Acadian deformation and metamorphism is lacking at this latitude. The north-central Appalachian basin underwent a significant change during the Carboniferous. Prior to this time, the shoreline shifted laterally through transgressions and regressions largely as a function of sediment input and regional subsidence. In the Carboniferous, vertical movements in the basin became more important. During the Early Carboniferous, much of the Mauch Chunk delta was eroded in the central and western parts of the basin. At the end of the Early Carboniferous, an unconformity truncated progressively older rocks to the north toward New York. New sediment transport patterns and depositional environments within the basin during the Late Carboniferous probably reflect significant topographic and tectonic changes, not only in the hinterland, but in the basin itself, perhaps in conjunction with climatic changes. Extensive interfluvial swamps on a lower delta plain accumulated thick organic deposits which would become coal. This delta plain graded southwestward into tidal and marine environments. The Alleghany orogeny in the Early Permian interrupted deposition in much of the north-central Appalachian basin and profoundly altered its structure.

American Journal of Science↗

USGS2006

The Amphibian Research and Monitoring Initiative (ARMI): 5-year report

The Amphibian Research and Monitoring Initiative (ARMI) is an innovative, multidisciplinary program that began in 2000 in response to a congressional directive for the Department of the Interior to address the issue of amphibian declines in the United States. ARMI’s formulation was cross-disciplinary, integrating U.S. Geological Survey scientists from Biology, Water, and Geography to develop a course of action (Corn and others, 2005a). The result has been an effective program with diverse, yet complementary, expertise. ARMI’s approach to research and monitoring is multiscale. Detailed investigations focus on a few species at selected local sites throughout the country; monitoring addresses a larger number of species over broader areas (typically, National Parks and National Wildlife Refuges); and inventories to document species occurrence are conducted more extensively across the landscape. Where monitoring is conducted, the emphasis is on an ability to draw statistically defensible conclusions about the status of amphibians. To achieve this objective, ARMI has instituted a monitoring response variable that has nationwide applicability. At research sites, ARMI focuses on studying species/environment interactions, determining causes of observed declines, and developing new techniques to sample populations and analyze data. Results from activities at all scales are provided to scientists, land managers, and policymakers, as appropriate. The ARMI program and the scientists involved contribute significantly to understanding amphibian declines at local, regional, national, and international levels. Within National Parks and National Wildlife Refuges, findings help land managers make decisions applicable to amphibian conservation. For example, the National Park Service (NPS) selected amphibians as a vital sign for several of their monitoring networks, and ARMI scientists provide information and assistance in developing monitoring methods for this NPS effort. At the national level, ARMI has had major exposure at a variety of meetings, including a dedicated symposium at the 2004 joint meetings of the Herpetologists’ League, the American Society of Ichthyologists and Herpetologists, and the Society for the Study of Amphibians and Reptiles. Several principal investigators have brought international exposure to ARMI through venues such as the World Congress of Herpetology in South Africa in 2005 (invited presentation by Dr. Gary Fellers), the Global Amphibian Summit, sponsored by the International Union for Conservation of Nature (IUCN) and Wildlife Conservation International, in Washington, D.C., 2005 (invited participation by Dr. P.S. Corn), and a special issue of the international herpetological journal Alytes focused on ARMI in 2004 (edited by Dr. C.K. Dodd, Jr.). ARMI research and monitoring efforts have addressed at least 7 of the 21 Threatened and Endangered Species listed by the U.S. Fish and Wildlife Service (California red-legged frog [Rana draytonii], Chiricahua leopard frog [R. chiricahuensis], arroyo toad [Bufo californicus], dusky gopher frog [Rana sevosa], mountain yellow-legged frog [R. muscosa], flatwoods salamander [Ambystoma cingulatum], and the golden coqui [Eleutherodactylus jasperi]), and 9 additional species of concern recognized by the IUCN. ARMI investigations have addressed time-sensitive research, such as emerging infectious diseases and effects on amphibians related to natural disasters like wildfire, hurricanes, and debris flows, and the effects of more constant, environmental change, like urban expansion, road development, and the use of pesticides. Over the last 5 years, ARMI has partnered with an extensive list of government, academic, and private entities. These partnerships have been fruitful and have assisted ARMI in developing new field protocols and analytic tools, in using and refining emerging technologies to improve accuracy and efficiency of data handling, in conducting amphibian disease, malformation, and environmental effects research, and in implementing a network of monitoring and research sites. Accomplishments from these endeavors include more than 40 publications on amphibian status and trends, nearly 100 publications on amphibian ecology and causes of declines, and over 30 methodological publications. Several databases have emerged as a result of ARMI and its partnerships; one, a digital atlas of ranges for all U.S. amphibian species, was used by the IUCN to display amphibian distribution maps in the Global Amphibian Assessment Project. Given the scope of ARMI and the panoply of projects, findings have had implications for policy. Investigations that demonstrate amphibian declines or illuminate causes of declines provide valuable information about habitat management, environmental effects, mechanisms for the spread of disease, and human/amphibian interfaces. This information has been made available to land managers, scientists, educators, Congress and other policymakers, and the public. The support afforded ARMI by Congress has been influential in the program’s development and success. The value of ARMI’s efforts will continue to increase as we are able to extend our studies spatially and temporally to answer critical questions with more confidence. We are using ARMI’s resources efficiently and continuing to develop innovative mechanisms for leveraging resources for maximum effectiveness during challenging financial times. This report is a 5-year retrospective of the structure, methodology, progress, and contributions to the broader scientific community that have resulted from this national USGS program. We evaluate ARMI’s success to date, with regard to the challenges faced by the program and the strengths that have emerged. We chart objectives for the next 5 years that build on current accomplishments, highlight areas meriting further research, and direct efforts to overcome existing weaknesses.

Scientific Investigations Report↗

USGS1979

Effects of karst and geologic structure on the circulation of water and permeability in carbonate aquifers

The results of the natural processes caused by solution and leaching of limestone, dolomite, gypsum, salt and other soluble rocks, is known as karst. Development of karst is commonly known as karstification, which may have a pronounced effect on the topography, hydrology and environment, especially where such karst features as sinkholes and vertical solution shafts extend below the land surface and intersect lateral solution passages, cavities, caverns and other karst features in carbonate rocks. Karst features may be divided into two groups: (1) surficial features that do not extend far below the surface; and (2) karst features such as sinkholes that extend below the surface and affect the circulation of water below. The permeability of the most productive carbonate aquifers is due chiefly to enlargement of fractures and other openings by circulation of water. Important controlling factors responsible for the development of karst and permeability in carbonate aquifers include: (1) climate, topography, and presence of soluble rocks; (2) geologic structure; (3) nature of underground circulation; and (4) base level. Another important factor is the condition of the surface of the carbonate rocks at the time they are exposed to meteoric water. A carbonate rock surface, with soil or relatively permeable, less soluble cover, is more favorable for initiation of karstification and solution than bare rocks. Water percolates downward through the cover to the underlying carbonate rocks instead of running off on the surface. Also, the water becomes more corrosive as it percolates through the permeable cover to the underlying carbonate rocks. Where there is no cover or the cover has been removed, the carbonate rocks become case hardened and resistant to erosion. However, in regions underlain not only by carbonate rocks but also by beds of anhydrite, gypsum and salt, such as the Hueco Plateau in southeastern New Mexico, subsurface solution may occur where water without natural acids moves down from bare rock surfaces through cracks to the beds that are more soluble than carbonate rocks. For example, in the area of Carlsbad Caverns in southeastern New Mexico, much of the water responsible for solution that formed the caverns apparently entered the groundwater system through large open fractures and did not form sinkhole topography. East of the Carlsbad Caverns, however, in the Pecos River Valley where the carbonate rocks are overlain by the less soluble Ogallala Formation of Late Tertiary age, solution began along escarpments as the Pecos River and its tributaries cut through the less soluble cover. As these escarpments retreated, sinkholes and other karst features developed. Joints or fractures are essential for initiation of downward percolation of water in compact carbonate rocks such as some Paleozoic limestone in which there is no intergranular permeability. Also joints or fractures and bedding planes may be essential in the initiation of lateral movement of water in the zone of saturation. Where conditions of recharge and discharge are favorable, groundwater may move parallel to the dip. However, the direction of movement of water in most carbonate rocks is not necessarily down dip or parallel to the dip. The general direction of movement of both surface and groundwater may be parallel to the strike in a breached anticline. Faults may restrict the lateral movement of water, especially if water-bearing beds are faulted against relatively impervious beds. Conversely, some fault may serve as avenues through which water may move as, for example, in the Cretaceous Edwards aquifer in the San Antonio area, Texas. Karst aquifers, chiefly carbonate rocks, may be placed in three groups according to water-bearing capacity. Water in aquifers of group 1 occurs chiefly in joints, fractures, and other openings that have not been enlarged by solution. The yield of wells is small. Aquifers in group 2 , with low to intermediate yields, are those in which water occurs in joints and fractures with some cavities and channels enlarged by solution. Aquifers in group 3 are those in which the yield of wells and springs range from intermediate to very large. This group includes five of the most productive aquifers in the U.S.A. The water-bearing beds of all of these productive aquifers, except the Biscayne aquifer in southeastern Florida, contain buried paleokarst in which the permeability has been reactivated and enlarged by the present circulation system.

Journal of Hydrology↗

USGS2012

Modification of wave-cut and faulting-controlled landforms

From a casual observation that the form of degraded fault scarps resembles the error function, this investigation proceeds through an elementary diffusion equation representation of landform evolution to the application of the resulting equations to the modern topography of scarplike landforms. The morphologic observations can be analyzed either in the form of one or more cross-strike elevation profiles or in the form of the slope-offset plot, a point plot of maximum scarp slope versus scarp offset. Working with either or both of these data representations for nine geologic structures, which range in age from 3 to 400 ka B.P. and in offset from 1 to 50 m, we apply analytical solutions for the vertical initial value scarp, the vertical continuous offset scarp, and the finite slope, initial value scarp. The model calculations are intrinsically ambiguous, yielding as the final answer only the product κ t (in the case of the initial value problem) or the product κ A −1 (in the case of the repeated faulting problem); here t is the age of a single scarp-forming event, 2 A is the vertical slip rate, and κ is the “mass diffusivity.” A single profile across three sea cliffs along the Santa Cruz, California, coast is analyzed as three separate initial value problems. A reasonably constrained age for the sea cliff standing above the Highway 1 platform returns κ = 11 GKG (1 GKG = 1 m 2 /ka). With this κ, we can date the two older sea cliffs. In fact, we do the converse: age estimates for these two older sea cliffs based on a uniform rate of uplift both yield the same κ as for the lower sea cliff. We treat a single profile of the Raymond fault in Pasadena/San Marino in terms of the repeated faulting problem; for it the uplift rate of R. Crook and others yields κ = 16 GKG. The very substantial preexisting offset across the Raymond fault must have been buried/leveled some 230 ka B.P., when the modern topography began to form. Our analysis of the Lake Bonneville shoreline scarps reveals a dependence of κ t on 2a, suggestive of nonlinear modification processes. This appearance is treated with the finite slope initial value scarp model to determine κ=1.1 GKG for the Lake Bonneville shoreline scarps. The suggestion of M. N. Machette that approximately 100,000-year-old, meter-high scarps are “unobservable” in weakly consolidated alluvial terranes of the Basin and Range and Rio Grande Rift Valley provinces can be formulated as κ ≳ 1 GKG. The coincidence between this inequality and the Lake Bonneville shoreline κ is striking, and it suggests that the value of κ = 1 GKG may be generally applicable, as a good first approximation, to the modification of alluvial terranes within the semiarid regions of the western United States. The Lake Bonneville shoreline κ is the basis for dating four sets of fault scarps in west-central Utah. The Drum Mountains fault scarps can be modeled in several different circumstances, but the most likely interpretation is that these fault scarps formed as the result of a single episode of normal faulting 3.6 to 5.7 ka B.P. The younger age is associated with quite low initial slope angles (25°). The other three sets of fault scarps show no evidence for finite initial value slopes. Fault scarps along the eastern base of the Fish Springs Range are very young, 3 ka B.P. We estimate the age of fault scarps along the western flank of the Oquirrh Mountains to be 32 ka B.P., which meets the weak geologic constraint that they be older than the Lake Bonneville shoreline. Fault scarps along the northeastern margin of the Sheeprock Mountains are even older, 53 ka B.P. An intriguing consequence of our single-event analysis of these scarps is that an 11.5-m offset occurred in a single earthquake.

Journal of Geophysical Research Solid Earth↗

USGS2012

A seismic refraction survey of the Imperial Valley Region, California

The U.S. Geological Survey conducted an extensive seismic refraction survey in the Imperial Valley region of California in 1979. The Imperial Valley is located in the Salton Trough, an active rift between the Pacific and North American plates. Forty shots fired at seven shot points were recorded by 100 portable seismic instruments at typical spacing of 0.5–1 km. More than 1300 recording locations were occupied, and more than 3000 usable seismograms were obtained. We analyzed five profiles using a standard ray‐tracing program, constructed a contour map of reduced travel times from our most widely recorded shot point, and modeled an existing gravity profile across the Salton Trough. Results are itemized: (1) All models have in common a sedimentary layer ( V p = 1.8–5.0 km/s), a “transition zone” ( V p = 5.0–5.65 km/s), a basement ( V p = 5.65 km/s in the Imperial Valley, 5.9 km/s on the bordering mesas), and subbasement ( V p = 7.2 km/s). (2) The sedimentary layer ranges in thickness along the axis of the Salton Trough from 3.7 km (Salton Sea) to 4.8 km (U.S.‐Mexican border). On the bordering mesas it is quite variable in thickness. (3) The “transition” zone is about 1 km thick in most places. In the Imperial Valley there are no marked velocity discontinuities in this zone between the sedimentary layer and basement. On the bordering mesas, however, there is a discontinuity at the top of this zone. (4) There are apparently two types of basement. On the bordering mesas, basement is crystalline igneous and metamorphic rocks. In the Imperial Valley, basement is mostly lower‐greenshist‐facies sedimentary rocks, based primarily on the smooth transition in character from sediment to basement arrivals, the low value of basement velocity, and the fact that deep (4 km) wells in the valley penetrate only the upper part of the known Cenozoic stratigraphic column for the Salton Trough. (5) The subbasement, or intermediate crustal layer, ranges in depth along the axis of the Salton Trough from 16 km (Salton Sea) to 10 km (U.S.‐Mexican border). Gravity modeling requires that this layer deepen and/or pinch out beneath the bordering mesas and mountain ranges. Based on its high velocity and the presence of intrusive basaltic rocks in the sedimentary section in the Imperial Valley, the subbasement is thought to be a mafic intrusive complex similar to oceanic middle crust. (6) Several structures are seen that affect basement, transition zone, and deeper parts of the sedimentary layer. They include a scarp along the Imperial fault, as much as 1 km down to the northeast, and a scarp passing roughly along the topographic boundary between the Imperial Valley and the bordering mesa to the west, as much as 3½ km down to the east. We interpret the latter scarp to be the suture, or rift boundary, between the older crystalline basement on the mesa and the younger metasedimentary basement in the Imperial Valley. (7) On a contour map of reduced travel time from our most widely recorded shot point, subtle patches of early arrivals among otherwise late arrivals in the central Imperial Valley correlate well with known geothermal resource areas having reservoir temperatures of more than 150°C. Apparently the Salton Trough is a location where new crust is being generated. As the rift opens, mafic intrusive rocks fill it from below as sedimentary rocks fill it from above. Rifting and intrusion produce high heat flow that metamorphoses the sedimentary rocks to shallow depth (metasedimentary basement in the Imperial Valley) and thus consolidates the new crust.

California↗

USGS2001

The geology of a part of Acadia and the nature of the Acadian orogeny across Central and Eastern Maine

The zone of Acadian collision between the Medial New England and Composite Avalon terranes is well preserved in Maine. A transect from northwest (Rome) to southeast (Camden) crosses the eastern part of Medial New England comprising the Central Maine basin, Liberty-Orrington thrust sheet, and Fredericton trough, and the western part of Composite Avalon, including the Graham Lake, Clarry Hill, and Clam Cove thrust sheets. U-Pb geochronology of events before, during, and after the Acadian orogeny helps elucidate the nature and distribution of tectonostratigraphic belts in this zone and the timing of some Acadian events in the Northern Appalachians. The Central Maine basin consists of sedimentary and volcanic rocks of Middle Ordovician (∼470 to ∼460 Ma) age overlain with probable conformity by latest Ordovician(?) through earliest Devonian marine rift and flysch sedimentary rocks; these are intruded by weakly to undeformed plutonic rocks of Early and Middle Devonian age (∼399–378 Ma). The Fredericton trough consists of Early Silurian gray pelite and sandstone to earliest Late Silurian calcareous turbidite, deformed and variably metamorphosed prior to the emplacement of Late Silurian (∼422 Ma) and Early to Late Devonian (∼418 to ∼368 Ma) plutons. The Liberty-Orrington thrust sheet consists of Cambrian(?)-Ordovician (>∼474 to ∼469 Ma and younger) clastic sedimentary and volcanic rocks intruded by highly deformed Late Silurian (∼424 to ∼422 Ma) and Devonian (∼418 to ∼389 Ma) plutons, possibly metamorphosed in Late Silurian time (prior to ∼417 Ma), and metamorphosed to amphibolite facies in Early to Middle Devonian time (∼400 to ∼381 Ma). The Graham Lake thrust sheet contains possible Precambrian rocks, Cambrian sedimentary rocks with a volcanic unit dated at ∼503 Ma, and Ordovician rocks with possible Caradocian Old World fossils, metamorphosed and deformed in Silurian time and intruded by mildly to undeformed Late Silurian (∼421 Ma) and Late Devonian (∼371 to ∼368 Ma) plutons. The Clarry Hill thrust sheet consists of poorly studied, highly metamorphosed Cambrian (?) rocks. The Clam Cove thrust sheet contains highly deformed Precambrian limestone, shale, sandstone, and conglomerate, metamorphosed to epidote amphibolite facies and intruded by a mildly deformed pluton dated at ∼421 Ma. Metamorphism, deformation, and voluminous intrusive igneous activity of Silurian age are common to both the most southeastern parts of Medial New England and the thrust sheets of Composite Avalon. In contrast to Medial New England, the thrust sheets of Composite Avalon show only modest effects of Devonian deformation and metamorphism. Regional stratigraphic relations, paleontologic findings, and U-Pb geochronology suggest that the Graham Lake, Clarry Hill, and Clam Cove thrust sheets are far-traveled allochthons that were widely separated from Medial New England in the Silurian. One hundred nine (109) new U-Pb analyses of zircon, monazite, and sphene from 25 samples of metamorphosed, stratified, and intrusive igneous rocks are used to decipher the history of events along the transect. In our view, many of the structures within Medial New England were formed during the closing of the back-arc ocean during the waning stages of the Taconian orogeny. These features include the precursors to the upright folds found in Silurian sedimentary rocks, the west-facing Liberty-Orrington thrust sheet, and the Silurian plutons of Medial New England. Acadian tectonic features, including flysch sedimentation, igneous activity, deformation with nappe emplacement, and metamorphism record the progressive loading of Medial New England by a stack of thrust nappes emplaced in latest Silurian to Middle Devonian time. The Acadian orogeny is a prolonged event, lasting from earliest Late Silurian to the Late Devonian, whose evolution involved: (1) convergence between Medial New England and Composite Avalon along an east-dipping subduction zone from earliest Late Silurian to Early Devonian time; (2) collision and concurrent delamination of lithospheric mantle beneath Medial New England in Early Devonian time resulting in deformation, high-grade metamorphism, and intrusive igneous activity in the most eastern part of Medial New England and the western parts of Composite Avalon; (3) Early to Middle Devonian northwest-migrating penetrative deformations of the Acadian Main stage, including northwest-directed thrusting and recumbent folding followed by tightening of folds possibly produced in the waning stages of the Taconian orogeny and forming folded wave trains of isoclinal folds (∼419 to ∼404 Ma), (4) asymmetrical folds produced by east-west shortening (∼399 to ∼380 Ma); and (5) final westward emplacement of Composite Avalon thrust sheets onto Medial New England in Late Devonian time (∼380 to ∼371 Ma). The present boundary between rocks of Medial New England and Composite Avalon at the surface is the Sennebec Pond fault, a high-angle fault that cuts the Graham Lake and Clarry Hill thrusts, and is intruded by the Mt. Waldo pluton (∼371), one of several Late Devonian plutons (∼371 to ∼367 Ma) that mark the end of the Acadian orogeny in coastal Maine. The thrust sheets of Composite Avalon carried rocks of peri-Gondwanan affinity and with possible Old World fauna many kilometers to the west over Medial New England, thus potentially hiding the original suture at depth under the Gulf of Maine.

Maine↗