Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research - Oceans”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources
USGS2000

Strain accumulation across the Eastern California Shear Zone at latitude 36°30'N

The motion of a linear array of monuments extending across the Eastern California Shear Zone (ECSZ) has been measured from 1994 to 1999 with the Global Positioning System. The linear array is oriented N54°E, perpendicular to the tangent to the local small circle drawn about the Pacific-North America pole of rotation, and the observed motion across the ECSZ is approximated by differential rotation about that pole. The observations suggest uniform deformation within the ECSZ (strike N23°W) (26 nstrain yr −1 extension normal to the zone and 39 nstrain yr −1 simple right-lateral shear across it) with no significant deformation in the two blocks (the Sierra Nevada mountains and southern Nevada) on either side. The deformation may be imposed by right-lateral slip at depth on the individual major fault systems within the zone if the slip rates are: Death Valley-Furnace Creek fault 3.2±0.9 mm yr −1 , Hunter Mountain-Panamint Valley fault 3.3±1.6 mm yr −1 , and Owens Valley fault 6.9±1.6 mm yr −1 . However, this estimate of the slip rate on the Owens Valley fault is 3 times greater than the geologic estimate.

Journal of Geophysical Research B: Solid Earth↗
USGS2000

On the modified Mercalli intensities and magnitudes of the 1811-1812 New Madrid earthquakes

We reexamine original felt reports from the 1811–1812 New Madrid earthquakes and determine revised isoseismal maps for the three principal mainshocks. In many cases we interpret lower values than those assigned by earlier studies. In some cases the revisions result from an interpretation of original felt reports with an appreciation for site response issues. Additionally, earlier studies had assigned modified Mercalli intensity (MMI) values of V-VII to a substantial number of reports that we conclude do not describe damage commensurate with intensities this high. We investigate several approaches to contouring the MMI values using both analytical and subjective methods. For the first mainshock on 02∶15 LT December 16, 1811, our preferred contouring yields M ω7.2–7.3 using the area-moment regressions of Johnston [1996]. For the 08∶00 LT on January 23, 1812, and 03∶45 LT on February 7, 1812, mainshocks, we obtain M ω7.0 and M ω7.4–7.5, respectively. Our magnitude for the February mainshock is consistent with the established geometry of the Reelfoot fault, which all evidence suggests to have been the causative structure for this event. We note that the inference of lower magnitudes for the New Madrid events implies that site response plays a significant role in controlling seismic hazard at alluvial sites in the central and eastern United States. We also note that our results suggest that thrusting may have been the dominant mechanism of faulting associated with the 1811–1812 sequence.

Arkansas, Illinois, Kentucky, Missouri, Tennessee↗
USGS2000

Pore fluid pressure, apparent friction, and Coulomb failure

Many recent studies of stress-triggered seismicity rely on a fault failure model with a single free parameter, the apparent coefficient of friction, presumed to be a material constant with possible values 0 ≤ μ′ ≤ 1. These studies may present a misleading view of fault strength and the role of pore fluid pressure in earthquake failure. The parameter μ′ is intended to incorporate the effects of both friction and pore pressure, but is a material constant only if changes in pore fluid pressure induced by changes in stress are proportional to the normal stress change across the potential failure plane. Although specific models of fault zones permit such a relation, neither is it known that fault zones within the Earth behave this way, nor is this behavior expected in all cases. In contrast, for an isotropic homogeneous poroelastic model the pore pressure changes are proportional to changes in mean stress, μ′ is not a material constant, and −∞ ≤ μ′ ≤ +∞. Analysis of the change in Coulomb failure stress for tectonically loaded reverse and strike-slip faults shows considerable differences between these two pore pressure models, suggesting that such models might be distinguished from one another using observations of triggered seismicity (e.g., aftershocks). We conclude that using the constant apparent friction model exclusively in studies of Coulomb failure stress is unwise and could lead to significant errors in estimated stress change and seismic hazard.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Seismic mapping of shallow fault zones in the San Gabriel Mountains from the Los Angeles Region Seismic Experiment, southern California

During the Los Angeles Region Seismic Experiment (LARSE), a reflection/refraction survey was conducted along a profile (line 1) extending from Seal Beach, California, northeastward to the Mojave Desert and crossing the Los Angeles and San Gabriel Valley basins and San Gabriel Mountains. In most shot gathers from the southern and central San Gabriel Mountains, clear secondary arrivals are seen that merge, or appear to merge, with first arrivals at three locations, including the location of the Vincent thrust fault, an exposed late Mesozoic/early Cenozoic megathrust. These secondary arrivals are interpretable as reflections in the shallow crust (<5 km depth) from a concave-upward interface that projects to the surface in the north near the Vincent thrust fault, is offset in its central part at the San Gabriel fault (an old branch of the San Andreas fault), and terminates in the south at 1 to 2 km depth at the southern mountain front. The velocity structure above and below this interface strongly suggests it is the Vincent thrust fault: intermediate velocities (6.2 km/s), consistent with mylonites overlying the Vincent thrust fault, are observed above it; lower velocities (5.8 km/s), consistent with the Pelona Schist underlying the Vincent thrust fault, are observed below it. Problems arise, however, in attempting to match this reflector to the exposed Vincent thrust fault, which is seen in outcrops east of line 1. The Vincent thrust fault is shallower than the reflector in most places. An unmapped structure (steep fault, monocline, or thrust fault) is required between line 1 and the outcrops that either drops the Vincent thrust fault down to the depths of the reflector or repeats the Vincent thrust fault beneath line 1 in the footwall of another thrust fault. An alternative interpretation of the reflector is a deep greenstone horizon within the Pelona Schist, although this alternative is not favored by the velocity structure. Copyright 2001 by the American Geophysical Union.

California↗
USGS2000

Fracture process zone in granite

In uniaxial compression tests performed on Aue granite cores (diameter 50 mm, length 100 mm), a steel loading plate was used to induce the formation of a discrete shear fracture. A zone of distributed microcracks surrounds the tip of the propagating fracture. This process zone is imaged by locating acoustic emission events using 12 piezoceramic sensors attached to the samples. Propagation velocity of the process zone is varied by using the rate of acoustic emissions to control the applied axial force. The resulting velocities range from 2 mm/s in displacement-controlled tests to 2 μm/s in tests controlled by acoustic emission rate. Wave velocities and amplitudes are monitored during fault formation. P waves transmitted through the approaching process zone show a drop in amplitude of 26 dB, and ultrasonic velocities are reduced by 10%. The width of the process zone is ∼9 times the grain diameter inferred from acoustic data but is only 2 times the grain size from optical crack inspection. The process zone of fast propagating fractures is wider than for slow ones. The density of microcracks and acoustic emissions increases approaching the main fracture. Shear displacement scales linearly with fracture length. Fault plane solutions from acoustic events show similar orientation of nodal planes on both sides of the shear fracture. The ratio of the process zone width to the fault length in Aue granite ranges from 0.01 to 0.1 inferred from crack data and acoustic emissions, respectively. The fracture surface energy is estimated from microstructure analysis to be ∼2 J. A lower bound estimate for the energy dissipated by acoustic events is 0.1 J.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Earthquake stress drop and laboratory-inferred interseismic strength recovery

We determine the scaling relationships between earthquake stress drop and recurrence interval t r that are implied by laboratory-measured fault strength. We assume that repeating earthquakes can be simulated by stick-slip sliding using a spring and slider block model. Simulations with static/kinetic strength, time-dependent strength, and rate- and state-variable-dependent strength indicate that the relationship between loading velocity and recurrence interval can be adequately described by the power law V L ∝ t r n where n≈−1. Deviations from n=−1 arise from second order effects on strength, with n>−1 corresponding to apparent time-dependent strengthening and n<−1 corresponding to weakening. Simulations with rate and state-variable equations show that dynamic shear stress drop Δτ d scales with recurrence as d Δτ d / d ln t r ≤σ e ( b-a ), where σ e is the effective normal stress, μ=τ/σ e , and ( a-b )= d μ ss / d ln V is the steady-state slip rate dependence of strength. In addition, accounting for seismic energy radiation, we suggest that the static shear stress drop Δτ s scales as d Δτ s / d ln t r ≤σ e (1 +ζ)( b-a ), where ζ is the fractional overshoot. The variation of Δτ s with ln t r for earthquake stress drops is somewhat larger than implied by room temperature laboratory values of ζ and b-a . However, the uncertainty associated with the seismic data is large and the discrepancy between the seismic observations and the rate of strengthening predicted by room temperature experiments is less than an order of magnitude.

Journal of Geophysical Research B: Solid Earth↗
USGS2000

Acoustic properties of a crack containing magmatic or hydrothermal fluids

We estimate the acoustic properties of a crack containing magmatic or hydrothermal fluids to quantify the source properties of long-period (LP) events observed in volcanic areas assuming that a crack-like structure is the source of LP events. The tails of synthetic waveforms obtained from a model of a fluid-driven crack are analyzed by the Sompi method to determine the complex frequencies of one of the modes of crack resonance over a wide range of the model parameters α/ a and ρ f /ρ s , where αis the P wave velocity of the rock matrix, a is the sound speed of the fluid, and ρ f and p s are the densities of the fluid and rock matrix, respectively. The quality factor due to radiation loss ( Q r ) for the selected mode almost monotonically increases with increasing α/ a , while the dimensionless frequency ( v ) of the mode decreases with increasing α/ a and ρ f /ρ s . These results are used to estimate Q and v for a crack containing various types of fluids (gas-gas mixtures, liquid-gas mixtures, and dusty and misty gases) for values of a , ρ f , and quality factor due to intrinsic losses ( Q i ) appropriate for these types of fluids, in which Q is given by Q −l = Q r −l + Q i −1 . For a crack containing such fluids, we obtain Q ranging from almost unity to several hundred, which consistently explains the wide variety of quality factors measured in LP events observed at various volcanoes. We underscore the importance of dusty and misty gases containing small-size particles with radii around 1 μm to explain long-lasting oscillations with Q significantly larger than 100. Our results may provide a basis for the interpretation of spatial and temporal variations in the observed complex frequencies of LP events in terms of fluid compositions beneath volcanoes.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Flow of variably fluidized granular masses across three-dimensional terrain I. Coulomb mixture theory

Rock avalanches, debris flows, and related phenomena consist of grain-fluid mixtures that move across three-dimensional terrain. In all these phenomena the same basic forces, govern motion, but differing mixture compositions, initial conditions, and boundary conditions yield varied dynamics and deposits. To predict motion of diverse grain-fluid masses from initiation to deposition, we develop a depth-averaged, threedimensional mathematical model that accounts explicitly for solid- and fluid-phase forces and interactions. Model input consists of initial conditions, path topography, basal and internal friction angles of solid grains, viscosity of pore fluid, mixture density, and a mixture diffusivity that controls pore pressure dissipation. Because these properties are constrained by independent measurements, the model requires little or no calibration and yields readily testable predictions. In the limit of vanishing Coulomb friction due to persistent high fluid pressure the model equations describe motion of viscous floods, and in the limit of vanishing fluid stress they describe one-phase granular avalanches. Analysis of intermediate phenomena such as debris flows and pyroclastic flows requires use of the full mixture equations, which can simulate interaction of high-friction surge fronts with more-fluid debris that follows. Special numerical methods (described in the companion paper) are necessary to solve the full equations, but exact analytical solutions of simplified equations provide critical insight. An analytical solution for translational motion of a Coulomb mixture accelerating from rest and descending a uniform slope demonstrates that steady flow can occur only asymptotically. A solution for the asymptotic limit of steady flow in a rectangular channel explains why shear may be concentrated in narrow marginal bands that border a plug of translating debris. Solutions for static equilibrium of source areas describe conditions of incipient slope instability, and other static solutions show that nonuniform distributions of pore fluid pressure produce bluntly tapered vertical profiles at the margins of deposits. Simplified equations and solutions may apply in additional situations identified by a scaling analysis. Assessment of dimensionless scaling parameters also reveals that miniature laboratory experiments poorly simulate the dynamics of full-scale flows in which fluid effects are significant. Therefore large geophysical flows can exhibit dynamics not evident at laboratory scales.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Rapid fluid disruption: A source for self-potential anomalies on volcanoes

Self-potential (SP) anomalies observed above suspected magma reservoirs, dikes, etc., on various volcanoes (Kilauea, Hawaii; Mount Unzen, Japan; Piton de la Fournaise, Reunion Island, Miyake Jima, Japan) result from transient surface electric fields of tens of millivolts per kilometer and generally have a positive polarity. These SP anomalies are usually attributed to electrokinetic effects where properties controlling this process are poorly constrained. We propose an alternate explanation that contributions to electric fields of correct polarity should be expected from charge generation by fluid vaporization/disruption. As liquids are vaporized or removed as droplets by gas transport away from hot dike intrusions, both charge generation and local increase in electrical resistivity by removal of fluids should occur. We report laboratory observations of electric fields in hot rock samples generated by pulses of fluid (water) through the rock at atmospheric pressure. These indicate the relative amplitudes of rapid fluid disruption (RFD) potentials and electrokinetic potentials to be dramatically different and the signals are opposite in sign. Above vaporization temperatures, RFD effects of positive sign in the direction of gas flow dominate, whereas below these temperatures, effects of negative sign dominate. This suggests that the primary contribution to observed self-potential anomalies arises from gas-related charge transport processes at temperatures high enough to produce vigorous boiling and vapor transport. At lower temperatures, the primary contribution is from electrokinetic effects modulated perhaps by changing electrical resistivity and RFD effects from high-pressure but low-temperature CO2 and SO2 gas flow ripping water molecules from saturated crustal rocks. If charge generation is continuous, as could well occur above a newly emplaced dike, positive static potentials will be set up that could be sustained for many years, and the simplest method for identifying these hot, active regions would be to identify the SP anomalies they generate.

Hawai'i↗
USGS2001

Modeling consolidation and dewatering near the toe of the northern Barbados accretionary complex

At the toe of the northern Barbados accretionary complex, temperature and pore water chemistry data indicate that fluid flow is channeled along the décollement and other shallow thrust faults. We examine mechanisms that may prevent consolidation and maintain high permeability over large sections of the décollement. High-resolution bulk density data from five boreholes show that the décollement is well consolidated at some sites while other sites remain underconsolidated. Underconsolidated décollement behavior is associated with kilometer-scale negative-polarity seismic reflections from the décollement plane that have been interpreted to be fluid conduits. We use a coupled fluid flow/consolidation model to simulate the loading response of a 10-km-long by 680-m-thick slice of sediment as it enters the accretionary complex. The simulations capture 185 ka (5 km) of subduction, with a load function representing the estimated effective stress of the overriding accretionary prism (3.8° taper angle). Simulation results of bulk density in the décollement 3.2 km arcward of the deformation front are compared with observations. The results show that persistent high pore pressures at the arcward edge of the simulation domain can explain underconsolidated behavior. The scenario is consistent with previous modeling results showing that high pore pressures can propagate intermittently along the décollement from deeper in the complex. Simulated seaward fluxes in the décollement (1–14 cm yr −1 ) lie between previous estimates from modeling studies of steady state (<1 cm yr −1 ) and transient (>1 m yr −1 ) flow. Maximum simulated instantaneous fluid sources (2.5×10 −13 s −1 ) are comparable to previous estimates. The simulations show minor swelling of incoming sediments (fluid sources ∼−3×10 −15 s −1 ) up to 3 km before subduction that may help to explain small-scale shearing and normal faulting proximal to the protodécollement.

Atlantic Ocean, Northern Barbados Accretionary Com↗
USGS2001

Travel times of P and S from the global digital seismic networks: Implications for the relative variation of P and S velocity in the mantle

We present new data sets of P and S arrival times which have been handpicked from long-period vertical and transverse component recordings of the various global seismic networks. Using events which occurred from 1976 to 1994 results in ∼38,000 globally well-distributed measurements of teleseismic P and ∼41,000 measurements of S . These data are particularly useful for looking at the relative variation of S and P velocities in the lower mantle. We describe both the measurement techniques and the gross characteristics of the data sets. The size of our data sets allows us to exploit the internal consistency of the data to identify outliers using a summary ray analysis. Since the polarity of each arrival is also known, we can construct fault plane solutions and/or compare with polarities predicted by the Harvard centroid moment tensor solutions to further diagnose phase misidentification. This analysis results in ∼5% of the data being identified as outliers. An analysis of variance indicates that the S residual travel times are dominated by the effects of three-dimensional structure but the P data have comparable contributions from noise and source mislocation effects. The summary ray analysis reveals the basic character of lower mantle structure, and there are large-scale patterns in both the S and P data sets that correlate quite well with each other. This analysis suggests that on average, d ln v s / d ln v p is an increasing function of depth in the mantle going from a value of ∼1.7 at the top of the lower mantle to an apparent value of 4 near the base of the mantle. This latter extreme value of R seems to result mainly from data which sample one region in the lowermost mantle under the central Pacific, where large positive S residuals are associated with very small P residuals. Such an anomaly cannot be thermal in origin.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Deformation across the Pacific-North America plate boundary near San Francisco, California

We have detected a narrow zone of compression between the Coast Ranges and the Great Valley, and we have estimated slip rates for the San Andreas, Rodgers Creek, and Green Valley faults just north of San Francisco. These results are based on an analysis of campaign and continuous Global Positioning System (GPS) data collected between 1992 and 2000 in central California. The zone of compression between the Coast Ranges and the Great Valley is 25 km wide. The observations clearly show 3.8±1.5 mm yr −1 of shortening over this narrow zone. The strike slip components are best fit by a model with 20.8±1.9 mm yr −1 slip on the San Andreas fault, 10.3±2.6 mm yr −1 on the Rodgers Creek fault, and 8.1±2.1 mm yr −1 on the Green Valley fault. The Pacific-Sierra Nevada-Great Valley motion totals 39.2±3.8 mm yr −1 across a zone that is 120 km wide (at the latitude of San Francisco). Standard deviations are one σ. The geodetic results suggest a higher than geologic rate for the Green Valley fault. The geodetic results also suggest an inconsistency between geologic estimates of the San Andreas rate and seismologic estimates of the depth of locking on the San Andreas fault. The only convergence observed is in the narrow zone along the border between the Great Valley and the Coast Ranges.

California↗
USGS2001

Resolution analysis of finite fault source inversion using one- and three-dimensional Green's functions 2. Combining seismic and geodetic data

Using numerical tests for a prescribed heterogeneous earthquake slip distribution, we examine the importance of accurate Green's functions (GF) for finite fault source inversions which rely on coseismic GPS displacements and leveling line uplift alone and in combination with near-source strong ground motions. The static displacements, while sensitive to the three-dimensional (3-D) structure, are less so than seismic waveforms and thus are an important contribution, particularly when used in conjunction with waveform inversions. For numerical tests of an earthquake source and data distribution modeled after the 1994 Northridge earthquake, a joint geodetic and seismic inversion allows for reasonable recovery of the heterogeneous slip distribution on the fault. In contrast, inaccurate 3-D GFs or multiple 1-D GFs allow only partial recovery of the slip distribution given strong motion data alone. Likewise, using just the GPS and leveling line data requires significant smoothing for inversion stability, and hence, only a blurred vision of the prescribed slip is recovered. Although the half-space approximation for computing the surface static deformation field is no longer justifiable based on the high level of accuracy for current GPS data acquisition and the computed differences between 3-D and half-space surface displacements, a layered 1-D approximation to 3-D Earth structure provides adequate representation of the surface displacement field. However, even with the half-space approximation, geodetic data can provide additional slip resolution in the joint seismic and geodetic inversion provided a priori fault location and geometry are correct. Nevertheless, the sensitivity of the static displacements to the Earth structure begs caution for interpretation of surface displacements, particularly those recorded at monuments located in or near basin environments.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Resolution analysis of finite fault source inversion using one- and three-dimensional Green's functions 1. Strong motions

We develop a methodology to perform finite fault source inversions from strong motion data using Green's functions (GFs) calculated for a three-dimensional (3-D) velocity structure. The 3-D GFs are calculated numerically by inserting body forces at each of the strong motion sites and then recording the resulting strains along the target fault surface. Using reciprocity, these GFs can be recombined to represent the ground motion at each site for any (heterogeneous) slip distribution on the fault. The reciprocal formulation significantly reduces the required number of 3-D finite difference computations to at most 3NS, where NS is the number of strong motion sites used in the inversion. Using controlled numerical resolution tests, we have examined the relative importance of accurate GFs for finite fault source inversions which rely on near-source ground motions. These experiments use both 1-D and 3-D GFs in inversions for hypothetical rupture models in order (1) to analyze the ability of the 3-D methodology to resolve trade-offs between complex source phenomena and 3-D path effects, (2) to address the sensitivity of the inversion results to uncertainties in the 3-D velocity structure, and (3) to test the adequacy of the 1-D GF method when propagation effects are known to be three-dimensional. We find that given "data" from a prescribed 3-D Earth structure, the use of well-calibrated 3-D GFs in the inversion provides very good resolution of the assumed slip distribution, thus adequately separating source and 3-D propagation effects. In contrast, using a set of inexact 3-D GFs or a set of hybrid 1-D GFs allows only partial recovery of the slip distribution. These findings suggest that in regions of complex geology the use of well-calibrated 3-D GFs has the potential for increased resolution of the rupture process relative to 1-D GFs. However, realizing this full potential requires that the 3-D velocity model and associated GFs should be carefully validated against the true 3-D Earth structure before performing the inverse problem with actual data.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Thermal thickness and evolution of Precambrian lithosphere: A global study

The thermal thickness of Precambrian lithosphere is modeled and compared with estimates from seismic tomography and xenolith data. We use the steady state thermal conductivity equation with the same geothermal constraints for all of the Precambrian cratons (except Antarctica) to calculate the temperature distribution in the stable continental lithosphere. The modeling is based on the global compilation of heat flow data by Pollack et al. [1993] and more recent data. The depth distribution of heat‐producing elements is estimated using regional models for ∼300 blocks with sizes varying from 1°×1° to about 5°×5° in latitude and longitude and is constrained by laboratory, seismic and petrologic data and, where applicable, empirical heat flow/heat production relationships. Maps of the lateral temperature distribution at depths 50, 100, and 150 km are presented for all continents except Antarctica. The thermal thickness of the lithosphere is calculated assuming a conductive layer overlying the mantle with an adiabat of 1300°C. The Archean and early Proterozoic lithosphere is found to have two typical thicknesses, 200–220 km and 300–350 km. In general, thin (∼220 km) roots are found for Archean and early Proterozoic cratons in the Southern Hemisphere (South Africa, Western Australia, South America, and India) and thicker (>300 km) roots are found in the Northern Hemisphere (Baltic Shield, Siberian Platform, West Africa, and possibly the Canadian Shield). We find that the thickness of continental lithosphere generally decreases with age from >200 km beneath Archean cratons to intermediate values of 200±50 km in early Proterozoic lithosphere, to about 140±50 km in middle and late Proterozoic cratons. Using known crustal thickness, our calculated geotherms, and assuming that isostatic balance is achieved at the base of the lithosphere, we find that Archean and early Proterozoic mantle lithosphere is 1.5% less dense (chemically depleted) than the underlying asthenosphere, while middle and late Proterozoic subcrustal lithosphere should be depleted by ∼0.6–0.7%. Our results suggest three contrasting stages of lithosphere formation at the following ages: >2.5 Ga, 2.5–1.8 Ga, and <1.8 Ga. Ages of komatiites, greenstone belts, and giant dike swarms broadly define similar stages and apparently reflect secular changes in mantle temperature and, possibly, convection patterns.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Supply-limited horizontal sand drift at an ephemerally crusted, unvegetated saline playa

A site at Owens Dry Lake was observed for more than 4 years. The site was a vegetation-free saline playa where the surface formed “ephemeral crusts,” crusts that form after rainfall. Sometimes these crusts were destroyed and often a layer of particles on the crust would engage in vigorous aeolian activity. Three “phases” of active sand drifting are defined as almost no movement (extreme supply limitation), loose particles on crust with some degree of sand drift (moderate supply limitation), and unlimited source movement corresponding to a destroyed surface crust (unlimited supply). These “phases” occurred 45, 49, and 6% of the time, respectively. The accumulation of loose particles on the crust was mostly the result of in situ formation. Crusted sediments with loose particles on top can exhibit mass flux rates about the same as for noncrusted sediments. Crusted sediments limit or eliminate sand drift in two conditions: for rough crusts that effect a sufficiently high threshold friction velocity (above the wind friction velocity) and for limited amounts of loose particles on the crust where particle supply is less than would be transported in normal saltation for a thick sandy surface. These “supply-limited” cases are similar to wind erosion of limited spilled material on a hard concrete surface. We quantified “supply limitation” by defining a “potential” or “supply unlimited” sand drift function Q = AG where A represents supply limitation that decreases as the particle source is depleted. Here Q is the mass of sand transported through a surface perpendicular to the ground and to the wind and having unit width during time period t , and G = ∫ u * ( u 2 * − u 2 * t ) dt for u * > u * t . G is integrated for the same time period t as for Q , u * is the friction velocity of the wind, and u * t is the threshold friction velocity of the wind. Hard crusts (usually formed in the summer) tended to show almost no change of threshold friction velocity with time and often gave total protection from wind erosion. Rough crusts provided sufficient protection expressed as high threshold friction velocities. For these high threshold friction velocities, aeolian activity was greatly reduced or practically prevented. The softest crusts, usually formed in the winter, provided much less protection and sometimes were destroyed by the wind. Following this destruction the “potential” or “supply unlimited” sand drift would be observed.

California↗
USGS2001

Atmospheric regime of dust and salt through 75,000 years of Taylor Dome ice core: Refinement by measurement of major, minor, and trace metal suites

Measurement of absolute and relative amounts of dust and salt deposited in the polar ice record is central to several fields of study, including nutrient delivery, atmospheric deposition of trace elements, past wind strengths, dust provenance, and other aspects of climate and geochemical history. We present a method intended to give a more accurate picture than has been possible before of the total amounts and relative proportions of the dust and salt deposited by the atmosphere into polar ice. It also permits us to distinguish different compositional types of dust in the ice. The method is based on precise measurement of a suite of several metals whose proportions contrast strongly between dust and salt and vary substantially between dust types. We apply the method to a small suite of ice samples from the Taylor Dome core in coastal West Antarctica. In full glacial times, when total impurities were high and dust dominated over salt, wind strength in the West Antarctic region was apparently high, and extensive sea-ice cover prevented incorporation of salt into the atmospheric load. At the termination of the glacial period, increased salt in the dust-salt mixture indicates that sea ice diminished, but wind strength continued high, and unchanged dust composition indicates unchanged source areas. At about 10,000-11,000 y.B.P., sea-ice cover appears to have briefly returned to glacial conditions, but wind conditions remained in the milder postglacial condition. Soon after, sea ice retreated, and an abrupt change in dust composition indicates changed source materials or terranes. If extended by analysis of more samples from more sites, such information on salt and dust could provide firm constraints on past wind strengths, extent of sea-ice cover, deposition fluxes of salt and dust, and changing continental source areas of dust, for both polar regions of the Earth.

Journal of Geophysical Research D: Atmospheres↗
USGS2001

Primary centers and secondary concentrations of tectonic activity through time in the western hemisphere of Mars

Five main stages of radial and concentric structures formed around Tharsis from the Noachian through the Amazonian as determined by geologic mapping of 24,452 structures within the stratigraphic framework of Mars and by testing their radial and concentric orientations. Tectonic activity peaked in the Noachian (stage 1) around the largest center, Claritas, an elongate center extending more than 20° in latitude and defined by about half of the total grabens which are concentrated in the Syria Planum, Thaumasia, and Tempe Terra regions. During the Late Noachian and Early Hesperian (stage 2), extensional structures formed along the length of present-day Valles Marineris and in Thaumasia (with a secondary concentration near Warrego Vallis) radial to a region just to the south of the central margin of Valles Marineris. Early Hesperian (stage 3) radial grabens in Pavonis, Syria, Ulysses, and Tempe Terra and somewhat concentric wrinkle ridges in Lunae and Solis Plana and in Thaumasia, Sirenum, Memnonia, and Amazonis are centered northwest of Syria with secondary centers at Thaumasia, Tempe Terra, Ulysses Fossae, and western Valles Marineris. Late Hesperian/Early Amazonian (stage 4) structures around Alba Patera, the northeast trending alignment of Tharsis Montes, and Olympus Mons appears centered on Alba Patera. Stage 5 structures (Middle-Late Amazonian) represent the last pulse of Tharsis-related activity and are found around the large shield volcanoes and are centered near Pavonis Mons. Tectonic activity around Tharsis began in the Noachian and generally decreased through geologic time to the Amazonian. Statistically significant radial distributions of structures formed during each stage, centered at different locations within the higher elevations of Tharsis. Secondary centers of radial structures during many of the stages appear related to previously identified local magmatic centers that formed at different times and locations throughout Tharsis.

Journal of Geophysical Research E: Planets↗