Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Environment Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS2009

Quality-assurance data for routine water analyses by the U.S. Geological Survey laboratory in Troy, New York - July 2003 through June 2005

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2003 through June 2005. Results for the quality-control samples for 20 analytical procedures were evaluated for bias and precision. Control charts indicate that data for five of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, pH, silicon, and sodium. Seven of the analytical procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits; these procedures were: dissolved organic carbon, chloride, nitrate (ion chromatograph), nitrite, silicon, sodium, and sulfate. The calcium and magnesium procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The total aluminum and specific conductance procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 17 of 18 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 22 analytes. At least 85 percent of the samples met data-quality objectives for all analytes except total monomeric aluminum (82 percent of samples met objectives), total aluminum (77 percent of samples met objectives), chloride (80 percent of samples met objectives), fluoride (76 percent of samples met objectives), and nitrate (ion chromatograph) (79 percent of samples met objectives). The ammonium and total dissolved nitrogen did not meet the data-quality objectives. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality over the time period, with ratings for each sample in the satisfactory, good, and excellent ranges or less than 10 percent error. The P-sample (low-ionic-strength constituents) analysis had one marginal and two unsatisfactory ratings for the chloride procedure. The T-sample (trace constituents)analysis had two unsatisfactory ratings and one high range percent error for the aluminum procedure. The N-sample (nutrient constituents) analysis had one marginal rating for the nitrate procedure. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 84 percent of the samples met data-quality objectives for 11 of the 14 analytes; the exceptions were ammonium, total aluminum, and acid-neutralizing capacity. The ammonium procedure did not meet data quality objectives in all studies. Data-quality objectives were not met in 23 percent of samples analyzed for total aluminum and 45 percent of samples analyzed acid-neutralizing capacity. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 86 percent of the samples analyzed for calcium, chloride, fluoride, magnesium, pH, potassium, sodium, and sulfate. Data-quality objectives were not met by samples analyzed for fluoride.

Open-File Report↗
USGS2009

Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York - July 2005 through June 2007

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2005 through June 2007. Results for the quality-control samples for 19 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: total aluminum, calcium, magnesium, nitrate (colorimetric method), potassium, silicon, sodium, and sulfate. Eight of the analytical procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits; these procedures were: total aluminum, calcium, dissolved organic carbon, chloride, nitrate (ion chromatograph), potassium, silicon, and sulfate. The magnesium and pH procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The acid-neutralizing capacity, total monomeric aluminum, nitrite, and specific conductance procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicated that the procedures for 16 of 17 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 21 analytes. At least 93 percent of the samples met data-quality objectives for all analytes except acid-neutralizing capacity (85 percent of samples met objectives), total monomeric aluminum (83 percent of samples met objectives), total aluminum (85 percent of samples met objectives), and chloride (85 percent of samples met objectives). The ammonium and total dissolved nitrogen did not meet the data-quality objectives. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project met the Troy Laboratory data-quality objectives for 87 percent of the samples analyzed. The P-sample (low-ionic-strength constituents) analysis had two outliers each in two studies. The T-sample (trace constituents) analysis and the N-sample (nutrient constituents) analysis had one outlier each in two studies. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 85 percent of the samples met data-quality objectives for 11 of the 14 analytes; the exceptions were acid-neutralizing capacity, total aluminum and ammonium. Data-quality objectives were not met in 41 percent of samples analyzed for acid-neutralizing capacity, 50 percent of samples analyzed for total aluminum, and 44 percent of samples analyzed for ammonium. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 86 percent of the samples analyzed for calcium, magnesium, pH, potassium, and sodium. Data-quality objectives were met by 76 percent of the samples analyzed for chloride, 80 percent of the samples analyzed for specific conductance, and 77 percent of the samples analyzed for sulfate.

Open-File Report↗
USGS2018

Concentrations of lead and other inorganic constituents in samples of raw intake and treated drinking water from the municipal water filtration plant and residential tapwater in Chicago, Illinois, and East Chicago, Indiana, July–December 2017

The U.S. Geological Survey (USGS) Environmental Health Mission Area (EHMA) is providing comprehensive science on sources, movement, and transformation of contaminants and pathogens in watershed and aquifer drinking-water supplies and in built water and wastewater infrastructure (referred to as the USGS Water and Wastewater Infrastructure project) in the Greater Chicago Area and elsewhere in the United States, to fill data gaps identified by stakeholders and collaborators in drinking water and public health. EHMA Water and Wastewater Infrastructure research specifically provides insight into natural factors in the environment as well as those water-infrastructure components and processes (such as source-water corrosivity, treatment, plumbing, and so forth) that might influence human exposure to chemical and microbial contaminants at the residential tap. This infrastructure-exposure research role is fulfilled uniquely by the USGS and not by the U.S. Environmental Protection Agency (EPA), other agencies, or municipalities that focus on regulatory and policy activities and related compliance. The USGS approach to assessing the possible links between human health and chemical contaminant and pathogen exposure in drinking water is conducted in collaboration with public health experts and includes comprehensive characterization of the presence/absence and concentrations of more than 500 organic and 27 inorganic chemical constituents at the point of use (tap). Laboratory results for lead and other inorganic contaminants in Chicago, Illinois, and East Chicago, Indiana, residential tapwater are being released to ensure the timely release of quality-assured data to participants in the study. Concentrations of lead and other inorganic constituents were assessed in drinking water at the point of use (kitchen tap or filter) in 45 residential locations and in two locations within each of the two Chicago water purification plants and the two East Chicago water filtration plants during July–December 2017. Three methods were used for analyzing lead. The most sensitive method had a reporting limit of 0.020 micrograms per liter (µg/L). When using the most sensitive analytical method, lead was detected in 39 of 45 residential tapwater samples, with concentrations ranging from less than 0.020 µg/L to 5.31 µg/L (median of the detected values = 0.481 µg/L). Concentrations of lead also were detected in Lake Michigan intake water at all water purification/filtration plant facilities at concentrations ranging from 0.083 to 0.330 µg/L, but were not detected above the reporting limit in any samples of treated, pre-distribution drinking water at any of the water purification/filtration plant facilities. Because the USGS Water and Wastewater Infrastructure project in the Greater Chicago Area is focused on the potential human exposure to a broad suite of organic and inorganic contaminants in drinking water and is not focused specifically on lead, the sampling protocol did not include “first-draw,” stagnant sampling and samples were collected with point-of-use treatment in place, if present. Thus, the lead results reported herein are not appropriate for assessment of compliance with the EPA 1991 Lead and Copper Rule. Information resources for lead mitigation and water filtration are provided.

Illinois, Indiana↗
USGS1983

Laboratory safety handbook

Safety, defined as 'freedom from danger, risk, or injury,' is difficult to achieve in a laboratory environment. Inherent dangers, associated with water analysis and research laboratories where hazardous samples, materials, and equipment are used, must be minimized to protect workers, buildings, and equipment. Managers, supervisors, analysts, and laboratory support personnel each have specific responsibilities to reduce hazards by maintaining a safe work environment. General rules of conduct and safety practices that involve personal protection, laboratory practices, chemical handling, compressed gases handling, use of equipment, and overall security must be practiced by everyone at all levels. Routine and extensive inspections of all laboratories must be made regularly by qualified people. Personnel should be trained thoroughly and repetitively. Special hazards that may involve exposure to carcinogens, cryogenics, or radiation must be given special attention, and specific rules and operational procedures must be established to deal with them. Safety data, reference materials, and texts must be kept available if prudent safety is to be practiced and accidents prevented or minimized.

Open-File Report↗
USGS2016

Design and testing of a mesocosm-scale habitat for culturing the endangered Devils Hole Pupfish

aptive propagation of desert spring fishes, whether for conservation or research, is often difficult, given the unique and often challenging environments these fish utilize in nature. High temperatures, low dissolved oxygen, minimal water flow, and highly variable lighting are some conditions a researcher might need to recreate to simulate their natural environments. Here we describe a mesocosm-scale habitat created to maintain hybrid Devils Hole × Ash Meadows Amargosa Pupfish ( Cyprinodon diabolis × C. nevadensis mionectes ) under conditions similar to those found in Devils Hole, Nevada. This 13,000-L system utilized flow control and natural processes to maintain these conditions rather than utilizing complex and expensive automation. We designed a rotating solar collector to control natural sunlight, a biological reactor to consume oxygen while buffering water quality, and a reverse-daylight photosynthesis sump system to stabilize nighttime pH and swings in dissolved oxygen levels. This system successfully controlled many desired parameters and helped inform development of a larger, more permanent desert fish conservation facility at the U.S. Fish and Wildlife Service’s Ash Meadows National Wildlife Refuge, Nevada. For others who need to raise fish from unique habitats, many components of the scalable and modular design of this system can be adapted at reasonable cost.

North American Journal of Aquaculture↗
USGS1997

Water-quality trends for streams and reservoirs in the Research Triangle area of North Carolina, 1983-95

Water-quality and streamflow monitoring data, collected from 1983 to 1995, were analyzed for 34 stream and reservoir sites in a seven-county region within the upper Neuse and upper Cape Fear River Basins. Early data (1983-88) were compiled from U.S. Geological Survey water-quality studies and from the ambient water-quality monitoring network of the North Carolina Department of Environment, Health, and Natural Resources. Analyses of major ions, nutrients, metals, trace elements, and synthetic organic compounds were compiled from samples collected by the U.S. Geological Survey from 1988 to 1995 as part of a continuing project to monitor the water quality of surface-water supplies in the Research Triangle area of North Carolina, and from the North Carolina Department of Environment, Health, and Natural Resources ambient water-quality monitoring network. This report presents the results of analysis of consistently increasing or decreasing trends in concentrations of nitrogen and phosphorus species, suspended sediment, suspended solids, sodium, chloride, iron, manganese, zinc, and chlorophyll a from seasonal Kendall trend analysis on flow-adjusted concentrations for streams and concentrations in lakes. Total phosphorus concentrations also were tested for a step decrease in concentration (step trend) associated with the North Carolina phosphate-detergent ban of 1988. For some other constituents, insufficient data or values below laboratory detection limits precluded trend analysis. A regionwide decrease in total phosphorus, ranging from 25 to 81 percent, was observed that coincided with increased phosphorus removal efforts at municipal wastewater-treatment facilities in the region and the statewide phosphate-detergent ban. Most sites had stable or decreasing trends in nitrogen concentrations; however, increasing trends occurred in the Neuse River near Clayton and at Smithfield, both of which are downstream from the developing Raleigh-Durham area. Chlorophyll a concentrations have increased by 17 to 52 percent per year at monitored reservoirs, except at Cane Creek Reservoir and Lake Michie where there was no trend. No significant trends in suspended-sediment concentrations were observed. Long-term sodium concentrations were available for only a few sites. Of these, decreasing concentrations were observed in the Neuse River at Smithfield and Cane Creek near Orange Grove, and an increasing concentration was observed in University Lake. At most sites, concentrations of manganese, iron, and zinc were stable. Decreasing iron trends were observed in Little River and Cane Creek Reservoirs and Lake Michie. Cane Creek Reservoir also had a decreasing manganese trend. Seven sites, all downstream from wastewater-treatment facilities, were analyzed for zinc trends. A decreasing trend was observed in two of these--Knap of Reeds Creek and Little Lick Creek.

North Carolina↗
USGS1995

USGS global change research

The Earth's global environment--its interrelated climate, land, oceans, fresh water, atmospheric and ecological systems-has changed continually throughout Earth history. Human activities are having ever-increasing effects on these systems. Sustaining our environment as population and demands for resources increase requires a sound understanding of the causes and cycles of natural change and the effects of human activities on the Earth's environmental systems. The U.S. Global Change Research Program was authorized by Congress in 1989 to provide the scientific understanding necessary to develop national and international policies concerning global environmental issues, particularly global climate change. The program addresses questions such as: what factors determine global climate; have humans already begun to change the global climate; will the climate of the future be very different; what will be the effects of climate change; and how much confidence do we have in our predictions? Through understanding, we can improve our capability to predict change, reduce the adverse effects of human activities, and plan strategies for adapting to natural and human-induced environmental change.

Fact Sheet↗
USGS2020

Repetitive sampling and control threshold improve 16S rRNA results from produced waters associated with hydraulically fractured shales

Sequencing microbial DNA from deep subsurface environments is complicated by a number of issues ranging from contamination to non-reproducible results. Many samples obtained from these environments - which are of great interest due to the potential to stimulate microbial methane generation - contain low biomass. Therefore, samples from these environments are difficult to study as sequencing results can be easily impacted by contamination. In this case, the low amount of sample biomass may be effectively swamped by the contaminating DNA and generate misleading results. Additionally, performing field work in these environments can be difficult, as researchers generally have limited access to and time on site. Therefore, optimizing a sampling plan to produce the best results while collecting the greatest number of samples over a short period of time is ideal. This study aimed to recommend an adequate sampling plan for field researchers obtaining microbial biomass for 16S rRNA gene sequencing, applicable specifically to oil and gas-producing environments. Forty-nine different samples were collected by filtering specific volumes of produced water from a hydraulically fractured well producing from the Niobrara Shale. Water was collected in two different sampling events 24 hours apart. Four to five samples were collected from 11 specific volumes. These samples along with eight different blanks were submitted for analysis. DNA was extracted from each sample, and quantitative polymerase chain reaction (qPCR) and 16S rRNA Illumina MiSeq gene sequencing were performed to determine relative concentrations of biomass and microbial community composition, respectively. The qPCR results varied across sampled volumes, while no discernible trend correlated contamination to volume of water filtered. This suggests that collecting a larger volume of sample may not result in larger biomass concentrations or better representation of a sampled environment. Researchers could prioritize collecting many low volume samples over few high-volume samples. Our results suggest that there also may be variability in the concentration of microbial communities present in produced waters over short (i.e., hours) time scales, which warrants further investigation. Submission of multiple blanks is also vital to determining how contamination or low biomass effects may influence a sample set collected from an unknown environment.

Montana, Wyoming, Colorado, New Mexico, Texas, Okl↗
USGS1994

Habitat impacts of offshore drilling, eastern Gulf of Mexico

In this survey six offshore exploratory drill sites in a variety of environments and water depths were examined using a small research submersible. Sites varied from locations off northwest Florida to as far west as offshore Alabama. Water depths ranged from 21 m (70 ft) to 149 m (489 ft), and bottom sediments ranged from carbonate mud to Shelly quartz sand and silt to hard limestone. The age of the sites (the time between cessation of drilling activities and our observations) ranged from 15 months to 17 years . In a previous MMS-funded study, Shinn et al. (1989) and Dustan et al . (1991) examined eight sites off South Florida, where the age of the sites ranged from 2 to 29 years. The study documented repeatedly variability of impact from site to site . In the present study, we note a similar wide divergence of impacts . Using the concentration of barium (the major component of drill mud), cuttings, and trace metals as a basis, we found that time is the single most important factor determining the nature of habitat recovery. Older sites, particularly the 17-year-old site, were relatively pristine. At a 7-year-old site, two hurricanes did far more damage than drilling . At other sites, we documented a significant amount of discarded debris, and at two 5-year-old sites, large concentrations of barium and cuttings. Impacts, such as the extent of debris and cuttings, affected the bottom ranging in area from almost negligible (17-year-old site) to as much as 3 acres (4-year-old site) . As suspected, those sites with the most debris and/or open boreholes attracted the most abundant and diverse fish fauna.

Open-File Report↗
USGS1976

Textural distribution of sea-floor sediments, south Texas Outer Continental Shelf

The general texture of sea-floor sediments along the south Texas Outer Continental Shelf was evaluated in terms of gravel, sand, silt, and clay components. The gravel component is quantitatively minor and is concentrated mainly in the southern sector; it consists, for the most part, of relict biogenic detritus dominated by molluscan shells. The sand component consists of terrigenous and biogenic detritus. Modern sand is localized along the shoreface sector, whereas palimpsest and relict sands characterize the northern and southern sectors, which are the respective locations of the ancestral Brazos-Colorado 'and Rio Grande deltas. The central sector contains an extensive modern mud blanket that appears to be migrating southward over relict deposits of the ancestral Rio Grande delta. The silt fraction is the highly dominant component of the mud blanket; silt appears to be hydraulically trapped within the shelf environment and constitutes the most abundant detrital component within the Outer Continental Shelf region. The subordinate clay component of the mud blanket is concentrated toward the shelf break and may be largely escaping into deeper water environments.

Texas↗
USGS1988

The ecology of the soft-bottom benthos of San Francisco Bay: a community profile

This profile, part of a series of profiles concerning coastal habitats of the United States, is a detailed examination of the soft-bottom benthos of San Francisco Bay. A U.S. Fish and Wildlife Service and California Department of Fish and Game report (1979) entitled "Protection and Restoration of San Francisco Bay Fish and Wildlife Habitat" provides clear recognition of the importance of intertidal and subtidal soft-bottom habitats and their associated organisms to the bay's birds and fishes and to the overall functioning of the estuary. The purpose of this profile is to provide a description of the structure and functioning of the benthic community in San Francisco Bay (exclusive of its tidal marshes, which are discussed by M. Josselyn [1983] in another profile). The habitats covered in this volume include all nonvegetated soft-bottom intertidal and subtidal areas of the bay between the Golden Gate and the mouths of the Sacramento and San Joaquin Rivers to the northeast, and to the southern extremity of the bay. The profile provides a reference to the scientific information concerning the animals and plants of the bay's benthic communities, their importance to the bay ecosystem, and their value as a resource measured in human terms. Because there have been few process-oriented studies of the benthos of San Francisco Bay (e.g., field and laboratory rate-measurement experiments), the material presented herein is largely descriptive. Nonetheless, we have described the processes that interconnect the various physical, chemical, and biological components of the benthic environment, and the important couplings between this environment and the water column above, with reference to research results from other estuaries where necessary. We consider the role of the benthic community as a food source for fish, aquatic birds, and humans; as a consumer or degrader of organic materials including wastes; as a recycler of minerals and nutrients; and as an accumulator of pollutants.

California↗
USGS2022

Detecting algal toxins and organic contaminants of concern in the environment

The U.S. Geological Survey (USGS) Kansas Water Science Center Organic Geochemistry Research Laboratory (OGRL) was established in 1987. The OGRL is a multidisciplinary program that contributes knowledge about the distribution, fate, transport, and effects of new and understudied organic compounds that may affect human health and (or) ecosystems. The OGRL consists of two units: Algal and Other Environmental Toxins Unit and Environmental Organic Chemistry Unit. The OGRL does independent and collaborative research, develops robust analytical methods, and provides fee-for-service analytical laboratory analyses.

Fact Sheet↗
USGS1985

STATE WATER RESOURCES RESEARCH INSTITUTE PROGRAM: GROUND WATER RESEARCH.

This paper updates a review of the accomplishments of the State Water Resources Research Program in ground water contamination research. The aim is to assess the progress made towards understanding the mechanisms of ground water contamination and based on this understanding, to suggest procedures for the prevention and control of ground water contamination. The following research areas are covered: (1) mechanisms of organic contaminant transport in the subsurface environment; (2) bacterial and viral contamination of ground water from landfills and septic tank systems; (3) fate and persistence of pesticides in the subsurface; (4) leachability and transport of ground water pollutants from coal production and utilization; and (5) pollution of ground water from mineral mining activities.

Conference Paper↗
USGS2001

Automated ground-water monitoring with robowell-Case studies and potential applications

Robowell is an automated system and method for monitoring ground-water quality. Robowell meets accepted manual-sampling protocols without high labor and laboratory costs. Robowell periodically monitors and records water-quality properties and constituents in ground water by pumping a well or multilevel sampler until one or more purge criteria have been met. A record of frequent water-quality measurements from a monitoring site can indicate changes in ground-water quality and can provide a context for the interpretation of laboratory data from discrete samples. Robowell also can communicate data and system performance through a remote communication link. Remote access to ground-water data enables the user to monitor conditions and optimize manual sampling efforts. Six Robowell prototypes have successfully monitored ground-water quality during all four seasons of the year under different hydrogeologic conditions, well designs, and geochemical environments. The U.S. Geological Survey is seeking partners for research with robust and economical water-quality monitoring instruments designed to measure contaminants of concern in conjunction with the application and commercialization of the Robowell technology. Project publications and information about technology transfer opportunities are available on the Internet at URL http://ma.water.usgs.gov/automon/.

Conference Paper↗
USGS1971

Aids in designing laboratory flumes

The upsurge of interest in our environment has caused research and instruction in the flow of water along open channels to become increasingly popular in universities and institutes. This, in turn, has brought a greater demand for properly-designed laboratory flumes. Whatever the reason for your interest, designing and building the flume will take a little preparation. You may choose a pattern exactly like a previous design, or you may follow the more time-consuming method of studying several existing flumes and combine the most desirable features of each.

Open-File Report↗
USGS2018

When oil and water mix: Understanding the environmental impacts of shale development

Development of shale gas and tight oil, or unconventional oil and gas (UOG), has dramatically increased domestic energy production in the U.S. UOG resources are typically developed through the use of hydraulic fracturing, which creates high-permeability flow paths into large volumes of tight rocks to provide a means for hydrocarbons to move to a wellbore. This process uses significant volumes of water, sand, and chemicals, raising concerns about risks to the environment and to human health. Researchers in various disciplines have been working to make UOG development more efficient, and to better understand the risks to air quality, water quality, landscapes, human health, and ecosystems. Risks to air include releases of methane, carbon dioxide, volatile organic compounds, and particulate matter. Water-resource risks include excessive withdrawals, stray gas in drinking-water aquifers, and surface spills of fluids or chemicals. Landscapes can be significantly altered by the infrastructure installed to support large drilling platforms and associated equipment. Exposure routes, fate and transport, and toxicology of chemicals used in the hydraulic fracturing process are poorly understood, as are the potential effects on terrestrial and aquatic ecosystems and human health. This is made all the more difficult by an adaptable and evolving industry that frequently changes methods and constantly introduces new chemicals. Geoscientists responding to questions about the risks of UOG should refer to recent, rigorous scientific research.

GSA Today↗
USGS2007

Questa Baseline and Pre-Mining Ground-Water Quality Investigation. 24. Seismic Refraction Tomography for Volume Analysis of Saturated Alluvium in the Straight Creek Drainage and Its Confluence With Red River, Taos County, New Mexico

As part of a research effort directed by the New Mexico Environment Department to determine pre-mining water quality of the Red River at a molybdenum mining site in northern New Mexico, we used seismic refraction tomography to create subsurface compressional-wave velocity images along six lines that crossed the Straight Creek drainage and three that crossed the valley of Red River. Field work was performed in June 2002 (lines 1-4) and September 2003 (lines 5-9). We interpreted the images to determine depths to the water table and to the top of bedrock. Depths to water and bedrock in boreholes near the lines correlate well with our interpretations based on seismic data. In general, the images suggest that the alluvium in this area has a trapezoidal cross section. Using a U.S. Geological Survey digital elevation model grid of surface elevations of this region and the interpreted elevations to water table and bedrock obtained from the seismic data, we generated new models of the shape of the buried bedrock surface and the water table through surface interpolation and extrapolation. Then, using elevation differences between the two grids, we calculated volumes of dry and wet alluvium in the two drainages. The Red River alluvium is about 51 percent saturated, whereas the much smaller volume of alluvium in the tributary Straight Creek is only about 18 percent saturated. When combined with average ground-water velocity values, the information we present can be used to determine discharge of Straight Creek into Red River relative to the total discharge of Red River moving past Straight Creek. This information will contribute to more accurate models of ground-water flow, which are needed to determine the pre-mining water quality in the Red River.

Scientific Investigations Report↗